Parasitic and predatory behavior of Alysia manducator (Hymenoptera: Braconidae) on blow fly larvae feeding on an adult pig carcass in the Western Cape Province of South Africa: preliminary observations and forensic implications

Wasps are part of the entomofauna associated with vertebrate carrion. They are known to parasitize and prey on specific life stages of insect hosts such as eggs, larvae, pupae, and/or adults associated with vertebrate carrion. However, reports of parasitic behavior of wasps on carrion-associated insect life stages and their possible forensic implications are non-existent in the Western Cape Province of South Africa. This study is part of ongoing research investigating the entomofauna and their pattern of succession on an adult pig carcass in Cape Town, South Africa. During this study, the parasitic wasp Alysia manducator was noted parasitizing and preying on blow fly larvae associated with the decomposing carcass. The arrival of A. manducator coincides with the occurrence of blow fly eggs and/or larvae on the carcass. These wasps were seen in close association with the eggs and larvae of blow flies on various parts of the carcass and some wasps were seen dragging fly larvae attached to their ovipositors away from one part of the carcass to another. Some A. manducator were also observed walking over several larvae on the carcass while exhibiting a stabbing behavior presumably in search of a host for oviposition. We suggest that the observations recorded in this study are of considerable forensic importance as the dragging effect and predatory and stabbing behavior exhibited by A. manducator could potentially disrupt the feeding and development of the fly larvae on the carcass. This could subsequently alter the process of carcass decomposition and/or affect minimum post-mortem interval estimations.

Key for the identification of third instar larvae of African blowflies (Diptera: Calliphoridae) of forensic importance in death investigations

Blowfly larvae are the insects primarily responsible for the active stage of decomposition of exposed vertebrate remains and are the most frequently collected entomological evidence during forensic investigations of death. The necrophagous calliphorids in continental Africa that consistently develop on large vertebrate carrion include 11 species belonging to four genera: Calliphora, Chrysomya, Hemipyrellia and Lucilia. Most of these species are widespread in Africa and frequently reported on large animal carcasses and carrion and human corpses. A few keys have been compiled for identification of their third instar larvae, but none of them covers the complete set of taxa. Therefore, we provide a new comprehensive key with original illustrations of all taxonomically significant characters. The key is based on characters that should be easily observable even in poorly equipped local laboratories and is a reliable taxonomic tool for material collected in either urban or rural areas where synanthropic species predominate. However, it should be used with some caution in areas with relatively pristine natural habitats, where additional carrion-breeding species may occur. The publication of the key will significantly facilitate both medical and forensic entomological research and practice in Africa.

Caught in the act: impact of Crematogaster cf. liengmei (Hymenoptera: Formicidae) necrophagous behavior on neonate pigs (Sus scrofa domesticus L.) in the Western Cape Province of South Africa

Ants have been documented as part of the entomo-sarcosaprophagous community. They have been known to alter the process of carcass decomposition due to their ability to feed on fly eggs/larvae and create post-mortem skin injuries. However, studies on the impact of ants on decomposing carcasses are scarce, especially within the Western Cape Province of South Africa. This study was part of a research project that utilized two (2) neonate pig carcasses in each month of the year to establish baseline data on the insect species associated with decomposing carcasses in the Western Cape Province of South Africa. In the early spring (September 2020), mid-autumn (May 2021), and mid-winter (July 2021) trials respectively, several individuals of Crematogaster cf. liengmei colonized the pig carcasses shortly after deployment. There, they fed on the flesh of the carcasses and further inflicted bite marks and conspicuous post-mortem skin lesions. Following the reduction in the presence of Crematogaster cf. liengmei specifically in the mid-winter trial, non-vital bleeding was observed as a consequence of the skin lesions. In the early spring, mid- and late autumn (May 2021), and early (June 2021) and mid-winter trials respectively, Crematogaster cf. liengmei prevented the formation of large maggot masses, principally through the predation of fly eggs, larvae, and adults. The observations recorded in this study are of considerable importance in forensic investigations as the effect of the necrophagous behavior of Crematogaster cf. liengmei on decomposing remains can be misinterpreted by inexperienced investigators during crime scene investigations and may alter post-mortem interval estimations.

Incidental observation of bone modification by Crematogaster cf. liengmei (Hymenoptera: Formicidae) in Cape Town, South Africa

Different taxa of insects have been reported to modify the skeletal remains of vertebrates during feeding or the creation of their larval and pupal chambers. Anecdotal reports on the modification of skeletal remains by ants exist but are rare. In this paper, a case of modification of bone due to the feeding activity of the ant, Crematogaster cf. liengmei (Hymenoptera: Formicidae), is reported. In November 2022, a bone was encountered incidentally in the vicinity of the Table Mountain National Park. The bone had been colonized by several individuals of Crematogaster cf. liengmei. Several ants were observed feeding on and removing bone particles and soft tissue remnants. A closer observation revealed striae/furrows on the epiphyseal ends of the bone. A 60-kg pig cadaver used in a winter decomposition trial in the same area was similarly colonized by this ant species, resulting in soft-tissue modification. Due to the similarity in the striae/furrows observed on the bone and the bitemarks inflicted by the ants on the right ear of the pig cadaver in the vicinity, it was concluded that the striae/furrows seen on the bone were created by the ants. Our observations show that Crematogaster cf. liengmei is an important taphonomic bio-agent that can contribute to the modification of skeletal remains in terrestrial environments.

Positive non-linear capacitance: the origin of the steep subthreshold-slope in ferroelectric FETs

We show that the non-linear positive capacitance (PC) of ferroelectrics (FE) can explain the steep subthreshold-slope (SS) observed in FE based MOSFETs and often attributed to the existence of a negative capacitance in FE capacitors. Physically attainable and unattainable regions of the S-shape curve used in the negative capacitance theory are investigated by self-consistently solving Landau-Khalatnikov and Maxwell equations and by experimental validation. Finally, the conditions for attaining a steep SS in FE based MOSFETs assuming only positive capacitances are discussed.

Animal Models in Forensic Science Research: Justified Use or Ethical Exploitation?

A moral dilemma exists in biomedical research relating to the use of animal or human tissue when conducting scientific research. In human ethics, researchers need to justify why the use of humans is necessary should suitable models exist. Conversely, in animal ethics, a researcher must justify why research cannot be carried out on suitable alternatives. In the case of medical procedures or therapeutics testing, the use of animal models is often justified. However, in forensic research, the justification may be less evident, particularly when research involves the infliction of trauma on living animals. To determine how the forensic science community is dealing with this dilemma, a review of literature within major forensic science journals was conducted. The frequency and trends of the use of animals in forensic science research was investigated for the period 1 January 2012-31 December 2016. The review revealed 204 original articles utilizing 5050 animals in various forms as analogues for human tissue. The most common specimens utilized were various species of rats (35.3%), pigs (29.3%), mice (17.7%), and rabbits (8.2%) although different specimens were favored in different study themes. The majority of studies (58%) were conducted on post-mortem specimens. It is, however, evident that more needs to be done to uphold the basic ethical principles of reduction, refinement and replacement in the use of animals for research purposes.

DNA barcoding of forensically important flies in the Western Cape, South Africa

Forensic entomology aids the determination of post mortem interval based on arthropods associated with a deceased body. This relies on the accurate identification of insects that visit the body, particularly first colonisers such as Calliphoridae (Diptera). Traditional species identification though morphological keys can be challenging as immature or closely related specimens can look similar. Some of these challenges have been overcome through “DNA barcoding”, which involves the sequencing of informative regions within a species’ DNA and comparison to a database of reference sequences. However, reference DNA sequences of blow fly species in South Africa is currently limited. In this study, adult blow flies representing four species common to the Western Cape, South Africa (Chrysomya chloropyga, Chrysomya albiceps, Chrysomya marginalis, Lucilia sericata) were examined using morphological keys and DNA barcoding of two regions: COI and ITS2. These DNA sequences were then used as references for the successful identification of seven unknown immature specimens. Intraspecific divergence showed a maximum of 0.36% and 2.25% for COI and ITS2, respectively; interspecific divergence showed a minimum of 6.14% and 64.6% for COI and ITS2, respectively. According to these results, COI and ITS2 have sufficient discriminatory power for species-level identification for the four species studied.

Patterns of blunt force homicide in the West Metropole of the City of Cape Town, South Africa

There is currently a lack of information regarding the prevalence of and characteristics associated with blunt force trauma related homicides in South Africa. Information relating to the patterns of blunt force trauma could assist in the development and implementation of interventions targeted at specific areas or individuals as well as direct future research towards areas in need of investigation. This study is a 5-year retrospective review of autopsy reports obtained from Salt River Mortuary (Cape Town, South Africa). The prevalence of blunt force trauma was considered for unnatural deaths with a focus on homicide. The patterns of homicidal blunt force trauma are also presented. A total of 15 519 autopsy cases was analysed. In 1198 (7.72%) of these cases, the cause of death was found to be blunt force trauma and 828 (5.32%) of these cases were classified as homicides. Approximately 11% of blunt force homicide cases occurred in combination with sharp and/or ballistic trauma. Men from poor socio-economic areas were shown to be most at risk of blunt force homicide in the City of Cape Town.

Switching mechanism in two-terminal vanadium dioxide devices

Two-terminal thin film VO2 devices show an abrupt decrease of resistance when the current or voltage applied exceeds a threshold value. This phenomenon is often described as a field-induced metal-insulator transition. We fabricate nano-scale devices with different electrode separations down to 100 nm and study how the dc switching voltage and current depend on device size and temperature. Our observations are consistent with a Joule heating mechanism governing the switching. Pulsed measurements show a switching time to the high resistance state of the order of one hundred nanoseconds, consistent with heat dissipation time. In spite of the Joule heating mechanism which is expected to induce device degradation, devices can be switched for more than 10(10) cycles making VO2 a promising material for nanoelectronic applications.

Low temperature deposition of 2D WS2 layers from WF6 and H2S precursors: impact of reducing agents

We demonstrate the impact of reducing agents for Chemical Vapor Deposition (CVD) and Atomic Layer Deposition (ALD) of WS₂ from WF₆ and H₂S precursors.

Physical forces exerted by microbubbles on a surface in a traveling wave field

The effect of a wave with a varying traveling component on the bubble activity as well as the physical force generated by microbubbles on a surface has been studied. The acoustic emission from a collection of bubbles is measured in a 928 kHz sound field. Particle removal tests on a surface, which actually measures the applied physical force by the bubbles on that surface, indicate a very strong dependence on the angle of incidence. In other words, when the traveling wave component is maximized, the average physical force applied by microbubbles reaches a maximum. Almost complete particle removal for 78 nm silica particles was obtained for a traveling wave, while particle removal efficiency was reduced to only a few percent when a standing wave was applied. This increase in particle removal for a traveling wave is probably caused by a decrease in bubble trapping at nodes and antinodes in a standing wave field.

Towards an understanding and control of cavitation activity in 1 MHz ultrasound fields

Various industrial processes such as sonochemical processing and ultrasonic cleaning strongly rely on the phenomenon of acoustic cavitation. As the occurrence of acoustic cavitation is incorporating a multitude of interdependent effects, the amount of cavitation activity in a vessel is strongly depending on the ultrasonic process conditions. It is therefore crucial to quantify cavitation activity as a function of the process parameters. At 1 MHz, the active cavitation bubbles are so small that it is becoming difficult to observe them in a direct way. Hence, another metrology based on secondary effects of acoustic cavitation is more suitable to study cavitation activity. In this paper we present a detailed analysis of acoustic cavitation phenomena at 1 MHz ultrasound by means of time-resolved measurements of sonoluminescence, cavitation noise, and synchronized high-speed stroboscopic Schlieren imaging. It is shown that a correlation exists between sonoluminescence, and the ultraharmonic and broadband signals extracted from the cavitation noise spectra. The signals can be utilized to characterize different regimes of cavitation activity at different acoustic power densities. When cavitation activity sets on, the aforementioned signals correlate to fluctuations in the Schlieren contrast as well as the number of nucleated bubbles extracted from the Schlieren Images. This additionally proves that signals extracted from cavitation noise spectra truly represent a measure for cavitation activity. The cyclic behavior of cavitation activity is investigated and related to the evolution of the bubble populations in the ultrasonic tank. It is shown that cavitation activity is strongly linked to the occurrence of fast-moving bubbles. The origin of this "bubble streamers" is investigated and their role in the initialization and propagation of cavitation activity throughout the sonicated liquid is discussed. Finally, it is shown that bubble activity can be stabilized and enhanced by the use of pulsed ultrasound by conserving and recycling active bubbles between subsequent pulsing cycles.

Enhancement of cavitation activity and particle removal with pulsed high frequency ultrasound and supersaturation

Megasonic cleaning as applied in leading edge semiconductor device manufacturing strongly relies on the phenomenon of acoustic cavitation. As the occurrence of acoustic cavitation is incorporating a multitude of interdependent effects, the amount of cavitation activity in the cleaning liquid strongly depends on the sonication conditions. It is shown that cavitation activity as measured by means of ultraharmonic cavitation noise can be significantly enhanced when pulsed sonication is applied to a gas supersaturated liquid under traveling wave conditions. It is demonstrated that this enhancement coincides with a dramatic increase in particle removal and is therefore of great interest for megasonic cleaning applications. It is demonstrated that the optimal pulse parameters are determined by the dissolution time of the active bubbles, whereas the amount of cavitation activity depends on the ratio between pulse-off and pulse-on time as well as the applied acoustic power. The optimal pulse-off time is independent of the corresponding pulse-on time but increases significantly with increasing gas concentration. We show that on the other hand, supersaturation is needed to enable acoustic cavitation at aforementioned conditions, but has to be kept below values, for which active bubbles cannot dissolve anymore and are therefore lost during subsequent pulses. For the applicable range of gas contents between 100% and 130% saturation, the optimal pulse-off time reaches values between 150 and 340 ms, respectively. Full particle removal of 78 nm-diameter silica particles at a power density of 0.67 W/cm(2) is obtained for the optimal pulse-off times. The optimal pulse-off time values are derived from the dissolution time of bubbles with a radius of 3.3 μm and verified experimentally. The bubble radius used in the calculations corresponds to the linear resonance size in a 928 kHz sound field, which demonstrates that the recycling of active bubbles is the main enhancement mechanism. The optimal choice of the pulsing conditions however is constrained by the trade-off between the effective sonication time and the desire to have a sufficient amount of active bubbles at lower powers, which might be necessary if very delicate structures have to be cleaned.

Time-resolved monitoring of cavitation activity in megasonic cleaning systems

The occurrence of acoustic cavitation in the cleaning liquid is a crucial precondition for the performance of megasonic cleaning systems. Hence, a fundamental understanding of the impact of different parameters of the megasonic process on cavitation activity is necessary. A setup capable of synchronously measuring sonoluminescence and acoustic emission originating from acoustically active bubbles is presented. The system also includes a high-speed-stroboscopic Schlieren imaging system to directly visualize the influence of cavitation activity on the Schlieren contrast and resolvable bubbles. This allows a thorough characterization of the mutual interaction of cavitation bubbles with the sound field and with each other. Results obtained during continuous sonication of argon-saturated water at various nominal power densities indicate that acoustic cavitation occurs in a cyclic manner, during which periods of stable and inertial cavitation activity alternate. The occurrence of higher and ultraharmonics in the acoustic emission spectra is characteristic for the stable cavitation state. The inertial cavitation state is characterized by a strong attenuation of the sound field, the explosive growth of bubbles and the occurrence of broadband components in the acoustic spectra. Both states can only be sustained at sufficiently high intensities of the sound field. At lower intensities, their occurrences are limited to short, random bursts. Cleaning activity can be linked to the cavitation activity through the measurement of particle removal on standard 200 mm silicon wafers. It is found that the particle removal efficiency is reduced, when a continuous state of cavitation activity ceases to exist.

Surface Characterisation of Si After HF Treatments and its Influence on the Dielectric Breakdown of Thermal Oxides

The characteristics of the HF-treated Si-surface are investigated as a function of dipping time in dilute HF solutions. It is found that the contact angle is a very sensitive measure for the degree of oxidation of the Si-surface. The importance of obtaining a perfectly passivated surface in order to reduce the particle deposition on the surface is shown. HF-last cleans are found to be beneficial in terms of metallic contamination and gate oxide integrity. The importance of the loading ambient in furnaces is investigated after HF-treatments and RCA-cleans.

Thermal Stability of High k Layers

Thermal stability of amorphous phases in various high-k layers (Al2O3, ZrO2, HfO2, ZrAlOx, HfAlOx and HfSiOx) and the phase transformation of crystalline ZrO2 and HfO2 were studied experimentally, as functions of surface preparation, deposition conditions, material composition and post deposition thermal treatment. It is found that pure ZrO2 and HfO2 show relatively low crystallization onset temperatures. The crystalline ZrO2 or HfO2 phases are tetragonal or monoclinic, depending on the layer thickness. The phase transformation of metastable t-phase into stable m-phase has been observed in ZrO2 and HfO2. Crystallization behavior of Al2O3 depends on the surface preparation of the substrate. ALCVD grown Al2O3 layers on an oxide-based surface remain amorphous after 1100°C spike annealing, while those on HF-last surface crystallize at temperatures around 800°C. Alloying Al2O3 into ZrO2 and HfO2 can improve their resistance to crystallization under thermal exposure. The kinetics of the crystallization in the alloys can be described by linear TTT curves. Hf-aluminates show better thermal stability than Zr-aluminates. A defect model relative to the phase transformation is discussed, based on the above observations.

Gas Stream Analysis and PFC Recovery in A Semiconductor Process

The performance of pressure swing adsorption (PSA) technology was assessed for recovering PFCs from the exhaust of a semiconductor plasma process. Several PSA process conditions were run to determine an optimized system. Under well defined conditions, the PSA technique was found to be effective at separating C2F6 from nitrogen, although the balance between recovery and product purity was evident. The exhaust of a plasma chamber was analysed by mass spectrometers and plasma etching conditions were varied to determine the effects on the PSA performance. A gas reactor column (GRC) was tested as pre‐treatment of the capturing system

Shock absorption potential of different mouth guard materials

STATEMENT OF PROBLEM

Clinical stresses and situations in the mouths of patients are substantially different; thus, it is not possible to make an exact in vivo comparison of the efficiency of various mouth guards.

PURPOSE

This study developed a device and a method to test and quantify the potential of mouth guards to absorb shock and evaluated and compared 5 designs for mouth guards.

MATERIAL AND METHODS

Strain gauges and accelerometer sensors were mounted in various positions on the maxilla and inside an artificial skull. Sensors quantified the response of several areas of the skull to inputs of force on the maxillary teeth protected by the mouth guard being investigated. Input of force was applied to the maxillary teeth with a modal hammer equipped with a load cell. Five mouth guards of each of 5 designs were manufactured and placed in position before force was applied to the maxillary teeth. All inputs were measured and analyzed and, from those results, a method was developed to quantify the relative potential of the mouth guards to absorb shock. This method was then used to quantify the shock absorption potential of the 5 types of mouth guard designs.

RESULTS

All 5 types of mouth guards provided some measure of protection and were better than no protection. However, the level of protection provided by the 5 mouth guard designs differed.