Improvement of methods for analysing sucrose acetate isobutyrate (SAIB) in soft drinks using GC-FID and evaluating antioxidant effects in the SAIB emulsion system

Sucrose acetate isobutyrate SAIB (E444) is a mixture produced by the esterification of sucrose with acetic anhydride and isobutyric anhydride. It is a food additive that is used as an emulsifier in soft drinks. It is difficult to analyse SAIB quantitatively because there are 256 synthesisable structures in the mixture. This study developed an analytical method for SAIB using gas chromatography-flame ionization detection (GC-FID). The pre-treatment of SAIB in soft drinks was performed using a liquid-liquid extraction method, which demonstrated a recovery rate of 107.8 ± 7.2%. In the GC-FID analysis of SAIB, numerous peaks were observed in the chromatogram, and the content of SAIB was calculated as the sum of these peak areas. A series of analytical methods were validated according to International Conference for Harmonization (ICH) guidelines. Accordingly, the applicability of the developed analytical method was confirmed for both domestic and imported soft drinks distributed in Korea. Additionally, in the linoleic acid emulsion, SAIB exhibited better lipid oxidation stability than the natural antioxidant α-tocopherol and had similar efficacy to the synthetic antioxidant butylated hydroxytoluene (BHT). Although SAIB has excellent lipid oxidation stability, it must be used within legal standards according to consumer demand to reduce the use of synthetic materials in processed foods. The validated GC-FID analytical method will enable subsequent monitoring of the distributed products.

Enhancement of the Color Rendering Index of White Organic Light-Emitting Devices Based on a Blue and Red Emitting Layer with a Y3Al5O12:Ce3+ Green Phosphor Color-Conversion Layer

White organic light-emitting devices (WOLEDs) were fabricated utilizing blue and red emitting organic light-emitting devices and a color conversion layer (CCL) made of yttrium aluminum garnet (YAG:Ce3+) phosphors embedded into polymethylmethacrylate. The good color balance for the color conversion of the WOLEDs was achieved utilizing 20-nm blue and 10-nm red OLEDs. The electroluminescence spectrum for the fabricated device showed a white color consisting of the blue color from the 4,4-bis(2,2-diphenylethen-1-yl)bipheny layer, the red color from the tris-(8-hydroxyquinolinato) aluminum: 4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran layer, and the green color from the YAG:Ce3+ phosphor. The Commission Internationale de l'Eclairage coordinates of the WOLEDs slightly shifted from (0.25, 0.23) of the blue and red emission OLEDs without phosphors to (0.34, 0.35) of the OLEDs with green phosphors, indicative of the pure white color. WOLEDs with a CCL exhibited three wavelength white emissions with a color rendering index of 86.

Optical properties of white organic light-emitting devices fabricated utilizing a mixed CaAl12O19:Mn4+ and Y3Al5O12:Ce3+ color conversion layer

White organic light-emitting devices (OLEDs) were fabricated by combining a blue OLED with a color conversion layer made of mixed Y3Al5O12:Ce3+ green and Ca2AlO19:Mn4+ red phosphors. The X-ray diffraction patterns showed that Ce3+ ions in the Y3Al5O12:Ce3+ phosphors completely substituted for the Y3+ ions and the Mn4+ ions in the CaAl12O19:Mn4+ phosphors completely substituted for the Ca2+ ions. Electroluminescence spectra at 11 V for the OLEDs fabricated utilizing a color conversion layer showed that the Commission Internationale de l'Eclairage coordinates for the Y3Al5O12:Ce3+ and CaAl12O19:Mn4+ phosphors mixed at the ratio of 1:5 and 1:10 were (0.31, 0.34) and (0.32, 0.37), respectively, indicative of a good white color.

Color stability of white organic light emitting devices with a color conversion layer utilizing CdSe/ZnS quantum dots and phosphors dispersed in polymethylmethacrylate

White organic light-emitting devices (WOLEDs) were fabricated by combining a blue emitting organic light-emitting devices (OLEDs) and a color conversion layer made of yttrium aluminum garnet phosphors and CdSe/ZnS quantum dots (QDs) embedded into polymethylmethacrylate. When the ratio of phosphors and QDs changed, a good color balance was achieved at a ratio of 1:5, and the maximum luminance of 18.21 cd/m2 was obtained. As the applied voltage varied from 12 to 16 V, Commission Internationale de l'Eclairage coordinates shifted only slightly from (0.32, 0.34) to (0.30, 0.33), indicating a good color stability.

The time-dependent alteration of anti-diuretic hormone system in hindlimb unloaded rats

It is important to understand the mechanism on the fluid shift and volume regulation occurring in astronauts after spaceflight for future life in space. In the present study, we examined the time-dependent alteration of anti-diuretic hormone (ADH) concentrating on the water reabsorption system in hindlimb unloaded rats. Male Sprague-Dawley rats were hindlimb unloaded for 1 (HU1), 7(HU7), 14 days (HU14) or rested in the ground for 3 days after HU14 (HU14+3). The plasma ADH and angiotensin II level showed peak value at HU7, and the alterations were restored at HU14. However, several serum electrolytes (Na, K, Cl) were not changed regardless of HU period. In the immunohistochemical study, we examined that ADH and c-Fos immunoreactivities (IR) were maximized at HU7 in the paraventricular nucleus (PVN) and supraoptic nucleus (SON). Aquaporin 2 (AQP2) IR also was increased in the renal collecting duct for water re-absorption at HU7 showing a similar pattern with ADH. These results present a series of physiological ADH system alteration following to period of hindlimb unloading stimulus, indicating that ADH system is activated significantly at HU7. In addition, our results suggest that ADH system activation may be involved in anti-diuretic phenomenon in early spaceflight period. Furthermore, it is speculated that ADH system may require 14 days for adaptation to microgravity.

Effects of the mixing ratio of the CaAl12O19:mn and Zn2SiO4:mn color-conversion layer on the color tunable emissions of white organic light-emitting devices

The optical properties of white organic light-emitting devices (WOLEDs) fabricated utilizing a CaAl12O19:Mn and Zn2SiO4:Mn phosphor layer were investigated. X-ray diffraction patterns for CaAl12O19:Mn and Zn2SiO4:Mn phosphors showed that Mn ions in the CaAl12O19:Mn phosphors were completely substituted into Ca ions and that Mn ions in the Zn2SiO4:Mn phosphors were completely substituted into Zn ions. Field emission scanning electron microscopy images showed that the size of the CaAl12O19:Mn phosphor was approximately between 0.1 and 3 microm, and that the size of the Zn2SiO4:Mn phosphor was smaller than 7 microm. The color coordinates of the electroluminescence spectra for WOLEDs with phosphor thicknesses of 0.25 and 0.35 mm shifted to the white emission side because the generated blue light from the blue OLEDs combined with the red and green lights was converted by the CaAl12O19:Mn and the Zn2SiO4:Mn phosphor down-conversion layers.

Development of an antibody-based assay for determination of baculovirus titers in 10 hours

The baculovirus expression system has been used to produce large amounts of biologically active proteins by infecting insect cells with a recombinant baculovirus expressing the target protein. For an efficient expression of the target protein, it is necessary to infect insect cells with an adequate amount of virus. However, current methods are time-consuming and either have technical difficulties or are limited as a result of virus expression mechanism using a reporter gene. A novel method is developed to yield virus titers in 10 h that is easy to perform using 96-well plates and applicable to both any Autographa californica nucleopolyhyderovirus (AcNPV) and Bombyx mori nucleopolyhedrovirus (BmNPV)-based recombinant baculovirus. This assay uses an antibody to a DNA-binding protein to detect the infected cells via immunostaining. The titer is determined by counting foci produced as a result of infection of the virus under a fluorescent microscope. The required incubation period was shortened considerably because infected cells expressed viral antigens at the post-infection time of 4 h. Therefore, 10 h was enough to estimate the virus titer including virus infection time, insect cell culture, and estimation of virus titer. Titers determined using this immunological assay are comparable, both in value and validity, to those obtained using a traditional method, provided that the stocks have titers above 10(3) pfu/mL.

Increased ferric iron content and iron-induced oxidative stress in the brains of scrapie-infected mice

Scrapie is a transmissible neurodegenerative disease of sheep and goats. The neuropathological changes include vacuolation, astrocytosis, the development of amyloid plaques in some instances, and neuronal loss. The mechanisms involved in neuronal cell death in scrapie are not known. Recently, we reported the presence of oxidative stress in the brains of scrapie-infected animals and suggested that this is the main mechanism that induces neuronal cell loss. It is known that oxidative stress induced by free radicals is associated with iron accumulation; this association led to an examination of the levels of iron (total iron, Fe(2+) and Fe(3+)) in the brains of control and scrapie-infected mice by biochemical methods. In the scrapie-infected group, both the level of total iron and the Fe(3+) level were significantly increased in cerebral cortex, striatum, and brainstem as compared to the values in the control group. A shift in the ratio of Fe(2+)/Fe(3+) was observed in the same regions of infected mice. Additionally, in this scrapie model, we confirmed the presence of oxidative stress, as evidenced by the increase of free malondialdehyde. These results suggest that iron metabolism is changed and that iron-induced oxidative stress partly contributes to neurodegeneration in scrapie infection.

Analysis of expressed sequence tags from Brassica rapa L. ssp. pekinensis

Non-redundant expressed sequence tags (ESTs) were generated from six different organs at various developmental stages of Chinese cabbage, Brassica rapa L. ssp. pekinensis. Of the 1,295 ESTs, 915 (71%) showed significantly high homology in nucleotide or deduced amino acid sequences with other sequences deposited in databases, while 380 did not show similarity to any sequences. Briefly, 598 ESTs matched with proteins of identified biological function, 177 with hypothetical proteins or non-annotated Arabidopsis genome sequences, and 140 with other ESTs. About 82% of the top-scored matching sequences were from Arabidopsis or Brassica, but overall 558 (43%) ESTs matched with Arabidopsis ESTs at the nucleotide sequence level. This observation strongly supports the idea that gene-expression profiles of Chinese cabbage differ from that of Arabidopsis, despite their genome structures being similar to each other. Moreover, sequence analyses of 21 Brassica ESTs revealed that their primary structure is different from those of corresponding annotated sequences of Arabidopsis genes. Our data suggest that direct prediction of Brassica gene expression pattern based on the information from Arabidopsis genome research has some limitations. Thus, information obtained from the Brassica EST study is useful not only for understanding of unique developmental processes of the plant, but also for the study of Arabidopsis genome structure.

Calreticulin couples calcium release and calcium influx in integrin-mediated calcium signaling

The engagement of integrin alpha7 in E63 skeletal muscle cells by laminin or anti-alpha7 antibodies triggered transient elevations in the intracellular free Ca(2+) concentration that resulted from both inositol triphosphate-evoked Ca(2+) release from intracellular stores and extracellular Ca(2+) influx through voltage-gated, L-type Ca(2+) channels. The extracellular domain of integrin alpha7 was found to associate with both ectocalreticulin and dihydropyridine receptor on the cell surface. Calreticulin appears to also associate with cytoplasmic domain of integrin alpha7 in a manner highly dependent on the cytosolic Ca(2+) concentration. It appeared that intracellular Ca(2+) release was a prerequisite for Ca(2+) influx and that calreticulin associated with the integrin cytoplasmic domain mediated the coupling of between the Ca(2+) release and Ca(2+) influx. These findings suggest that calreticulin serves as a cytosolic activator of integrin and a signal transducer between integrins and Ca(2+) channels on the cell surface.

Prolonged exposure to cigarette smoke blocks the neurotoxicity induced by kainic acid in rats

We examined the effects of cigarette smoke (CS) on three parameters associated with kainic acid (KA)-induced neurotoxicity: seizure activity, cell loss in the hippocampus, and increased Fos-related antigen (FRA) expression. Animals were exposed to the main stream of CS from 15 Kentucky 2R1F research cigarettes containing 28.6 mg tar and 1.74 mg nicotine per cigarette, for 10 min a day, 6 days per week, for 4 weeks, using an automatic smoking machine. KA administration (10 mg/kg, i.p.) produced robust behavioral convulsions lasting 4-5 h. Pre-exposure to CS significantly reduced the seizures, mortality, and severe loss of cells in regions CA1 and CA3 of the hippocampus after KA administration. Consistently, pre-exposure to CS significantly attenuated the KA-induced increased FRA immunoreactivity in the hippocampus. In contrast, pretreatment with central nicotinic antagonist, mecamylamine (2 or 10 mg/kg, i.p.) blocked the neuroprotective effects mediated by CS in a dose-dependent manner. These results indicate that CS exposure provides neuroprotection against the KA insult via nicotinic receptor activation.

Pseudomembranous necrotizing bronchial aspergillosis

We report a case of pseudomembranous necrotizing bronchial aspergillosis in a patient with acute myelocytic leukaemia who died of massive haemoptysis. Lobar collapse was demonstrated on chest radiography. CT showed a marked necrotic thickening of the lobar bronchus with extension of the disease in to the peribronchial region.

Cemento-ossifying fibroma presenting as a mass of the parapharyngeal and masticator space

We report a case of cemento-ossifying fibroma that presented as a large extraosseous mass in the masticator and parapharyngeal space. CT scanning and MR imaging showed a large extraosseous mass with central conglomerated, well-matured ossified nodules and fatty marrow. The central matured ossified nodules were of low density on CT scans and high signal intensity on T1- and T2-weighted MR images. Multiplanar reformatted CT scans revealed the origin of the mass to be at the extraction site of the right lower second molar tooth.

Novel polyphosphazene/poly(lactide-co-glycolide) blends: miscibility and degradation studies

A novel biodegradable polymer blend was developed for potential biomedical applications. A 50:50 poly(lactide-co-glycolide) (PLAGA) was blended in a 50:50 ratio with the followiing polyphosphazenes (PPHOS): poly[(25% ethyl glycinato)(75% p-methylphenoxy)phosphazene[, poly[(50% ethyl glycinato)(50% p-methylphenoxy)phosphazene], and poly[(75% ethyl glycinato)(25% p-methylphenoxy)phosphazene] to obtain Blends A, B, and C, respectively, using a mutual solvent technique. The miscibility of these blends was determined by measuring their glass transition temperature (Tg) using differential scanning calorimetry. After fabrication using a casting technique, the degradation of the matrices was examined. Differential scanning calorimetry showed one glass transition temperature for each blend which was between the Tg's of their respective parent polymers indicating miscibility of the blends. Surface analysis by scanning electron microscopy showed the matrices to have smooth uniform surfaces. Degradation studies showed near-zero order degradation kinetics for the blends with Blends A and B losing 10% of their mass after two weeks and Blend C degrading more rapidly (30% mass loss during the same period). These findings suggest that these novel biodegradable PLAGA/PPHOS blends may be useful for biomedical purposes.

Identification of a cDNA clone for the beta-subunit of the pyruvate dehydrogenase component of human pyruvate dehydrogenase complex

We report the isolation of a 1.5 kb cDNA clone for the beta subunit of human pyruvate dehydrogenase (E1) from a human liver lambda gt11 cDNA library using anti-E1 serum. We generated a peptide sequence of 24 amino acids starting from the N-terminus of bovine heart mature E1 beta. The identity of the E1 beta cDNA clone was confirmed by the similarity between the amino acid sequence deduced from the cDNA nucleotide sequence and the known amino acid sequence of bovine heart E1 beta. In Northern analysis of total RNA extracted from human heart, the E1 beta cDNA clone hybridized to a major 1.6 kb and a minor 5.2 kb RNA species.