Evaluation of amorphous and lipid-based formulation strategies to increase the in vivo cannabidiol bioavailability in piglets

Cannabidiol (CBD) suffers from poor oral bioavailability due to poor aqueous solubility and high metabolism, and is generally administered in liquid lipid vehicles. Solid-state formulations of CBD have been developed, but their ability to increase the oral bioavailability has not yet been proven in vivo. Various approaches are investigated to increase this bioavailability. This study aimed to demonstrate the enhancement of the oral bioavailability of oral solid dosage forms of amorphous CBD and lipid-based CBD formulation compared to crystalline CBD. Six piglets received the three formulations, in a cross-over design. CBD and 7 - COOH - CBD, a secondary metabolite used as an indicator of hepatic degradation, were analyzed in plasma. A 10.9-fold and 6.8-fold increase in oral bioavailability was observed for the amorphous and lipid formulations, respectively. However, the lipid-based formulation allowed reducing the inter-variability when administered to fasted animals. An entero-hepatic cycle was confirmed for amorphous formulations. Finally, this study showed that the expected protective effect of lipids against hepatic degradation of the lipid-based formulation did not occur, since the ratio CBD/metabolite was higher than that of the amorphous one.

Cortical hyperarousal in individuals with frequent nightmares

Nightmares are common among the general population and psychiatric patients and have been associated with signs of nocturnal arousal such as increased heart rate or increased high-frequency electroencephalographic (EEG) activity. However, it is still unclear, whether these characteristics are more of a trait occurring in people with frequent nightmares or rather indicators of the nightmare state. We compared participants with frequent nightmares (NM group; n = 30) and healthy controls (controls; n = 27) who spent 4 nights in the sleep laboratory over the course of 8 weeks. The NM group received six sessions of imagery rehearsal therapy (IRT), the 'gold standard' of cognitive-behavioural therapy for nightmares, between the second and the third night. Sleep architecture and spectral power were compared between groups, and between nights of nightmare occurrence and nights without nightmare occurrence in the NM group. Additionally, changes before and after therapy were recorded. The NM group showed increased beta (16.25-31 Hz) and low gamma (31.25-35 Hz) power during the entire night compared to the controls, but not when comparing nights of nightmare occurrence to those without. Moreover, low gamma activity in rapid eye movement sleep was reduced after therapy in the NM group. Our findings indicate, cortical hyperarousal is more of a trait in people with frequent nightmares within a network of other symptoms, but also malleable by therapy. This is not only a new finding for IRT but could also lead to improved treatment options in the future that directly target high-frequency EEG activity.

Feasibility study of the use of a homemade direct powder extrusion printer to manufacture printed tablets with an immediate release of a BCS II molecule

Among the various 3D printing techniques, FDM is the most studied in pharmaceutical research. However, it requires the fabrication of filaments with suitable mechanical properties using HME, which can be laborious and time-consuming. DPE has emerged as a single-step printing technique that can overcome FDM limits as it enables the direct printing of powder blends without the need of filaments. This study demonstrated the manufacturing of cylindrical-shaped printed tablets containing CBD, a BCS II molecule, with an immediate release. Different blends of PEO/E100 and PEO/SOL, each with 10 % of CBD, were printed and tested according to the Eur. Ph. for uncoated tablets. Each printed cylinder met the Eur. Ph. specifications for friability, mass variation and mass uniformity. However, only the E100-based formulations enabled a CBD immediate release, as formulations containing SOL formed a gel once in contact with the dissolution medium, reducing the drug dissolution rate.

Heteromeric clusters of ubiquitinated ER-shaping proteins drive ER-phagy

Membrane-shaping proteins characterized by reticulon homology domains play an important part in the dynamic remodelling of the endoplasmic reticulum (ER). An example of such a protein is FAM134B, which can bind LC3 proteins and mediate the degradation of ER sheets through selective autophagy (ER-phagy)¹. Mutations in FAM134B result in a neurodegenerative disorder in humans that mainly affects sensory and autonomic neurons². Here we report that ARL6IP1, another ER-shaping protein that contains a reticulon homology domain and is associated with sensory loss³, interacts with FAM134B and participates in the formation of heteromeric multi-protein clusters required for ER-phagy. Moreover, ubiquitination of ARL6IP1 promotes this process. Accordingly, disruption of Arl6ip1 in mice causes an expansion of ER sheets in sensory neurons that degenerate over time. Primary cells obtained from Arl6ip1-deficient mice or from patients display incomplete budding of ER membranes and severe impairment of ER-phagy flux. Therefore, we propose that the clustering of ubiquitinated ER-shaping proteins facilitates the dynamic remodelling of the ER during ER-phagy and is important for neuronal maintenance.

Influence of API physico-chemical properties on amorphization capacity of several mesoporous silica loading methods

The objective of this work was to evaluate the impact of physico-chemical properties of pharmaceutical drugs on the optimal mesoporous silica loading methods. Indeed, a good combination between drug and loading process has to be studied to promote the deepest penetration of the drug inside the mesopores, allowing high drug amorphization. Six molecules, namely lidocaine and its hydrochloride, ibuprofen, ketoprofen, artemether and miconazole, with different physico-chemical properties (the ionized character, the acid-base character, the HBDA number, the solubility in sc-CO₂ and the behavior under subcritical CO₂) were used to produce drug-silica formulations. Different impregnation processes (physical mixing, melting, wetting, sc-CO₂ and subcritical CO₂ impregnations) have been compared for each drug, in terms of drug recovery and crystallinity. Formulations showed drug percentage close to 100% except for supercritical soluble drug formulations impregnated by using sc-CO₂. However, the basic drug character provided less or no drug loss during impregnation. Processing insoluble sc-CO₂ molecule under supercritical conditions led to less crystallinity than the correspondent physical mixture suggesting an interesting repulsive effect that forces the drug penetration within the mesopores. Besides, it has been also highlighted that the HBDA number is not sufficient to predict the final drug loading. Melting methods have high interest considering the drugs tested and subcritical CO₂ could increase the loading, especially for drugs with high molten viscosity. This study showed that a plethora of loading methods can be used to provide high drug loaded MS formulations with a wide choice of equipment.

Impregnation of mesoporous silica with poor aqueous soluble molecule using pressurized carbon dioxide: Is the solubility in the supercritical and subcritical phase a critical parameter?

Recently, mesoporous silica (MS) has been used as a material able to maintain amorphous state of active compounds and therefore, enhance the oral bioavailability of BCSII drugs. Among impregnation methods of MS, techniques using supercritical carbon dioxide (Sc-CO₂) are promising tools. Solubility of compounds in Sc-CO₂ is reported as one of the most critical parameters, which usually limits its use in drug formulation. Indeed, most of compounds have poor solubility in Sc-CO₂. The aim of this work is to compare different MS and to study alternative processes using pressurized CO₂ for insoluble molecule in Sc-CO₂. By using high pressure reactor, DSC, HPLC and in vitro dissolution tests, the crystallinity and dissolution profiles of MS with different pore size (6.6 nm, 25.0 nm and 2.5 nm) impregnated with fenofibrate (FF) under Sc-CO₂ were compared to select the most appropriate carrier. Then, the selected MS has been impregnated under supercritical, subcritical and atmospheric conditions. We have shown that the MS pore size of 6.6 nm provides the higher amorphous drug loading capacity as well as the faster and higher drug dissolution. In addition, FF-MS formulations produced with pressurized CO₂ as fusion medium, both in subcritical and supercritical conditions; give similar crystallinity and dissolution results compared to those produced with supercritical fluids as solvent. Through this study, we show new possibilities of using CO₂ for insoluble compounds in this fluid.

Syndapin I Loss-of-Function in Mice Leads to Schizophrenia-Like Symptoms

Schizophrenia is associated with cognitive and behavioral dysfunctions thought to reflect imbalances in neurotransmission systems. Recent screenings suggested that lack of (functional) syndapin I (PACSIN1) may be linked to schizophrenia. We therefore studied syndapin I KO mice to address the suggested causal relationship to schizophrenia and to analyze associated molecular, cellular, and neurophysiological defects. Syndapin I knockout (KO) mice developed schizophrenia-related behaviors, such as hyperactivity, reduced anxiety, reduced response to social novelty, and an exaggerated novel object response and exhibited defects in dendritic arborization in the cortex. Neuromorphogenic deficits were also observed for a schizophrenia-associated syndapin I mutant in cultured neurons and coincided with a lack of syndapin I–mediated membrane recruitment of cytoskeletal effectors. Syndapin I KO furthermore caused glutamatergic hypofunctions. Syndapin I regulated both AMPAR and NMDAR availabilities at synapses during basal synaptic activity and during synaptic plasticity—particularly striking were a complete lack of long-term potentiation and defects in long-term depression in syndapin I KO mice. These synaptic plasticity defects coincided with alterations of postsynaptic actin dynamics, synaptic GluA1 clustering, and GluA1 mobility. Both GluA1 and GluA2 were not appropriately internalized. Summarized, syndapin I KO led to schizophrenia-like behavior, and our analyses uncovered associated molecular and cellular mechanisms.

Doping-Induced Electron Transfer at Organic/Oxide Interfaces: Direct Evidence from Infrared Spectroscopy

Charge transfer at organic/inorganic interfaces critically influences the properties of molecular adlayers. Although for metals such charge transfers are well documented by experimental and theoretical results, in the case of semiconductors, clear and direct evidence for a transfer of electrons or holes from oxides with their typically high ionization energy is missing. Here, we present data from infrared reflection-absorption spectroscopy demonstrating that despite a high ionization energy, electrons are transferred from ZnO into a prototype strong molecular electron acceptor, hexafluoro-tetracyano-naphthoquinodimethane (F₆-TCNNQ). Because there are no previous studies of this type, the interpretation of the pronounced vibrational red shifts observed in the experiment was aided by a thorough theoretical analysis using density functional theory. The calculations reveal that two mechanisms govern the pronounced vibrational band shifts of the adsorbed molecules: electron transfer into unoccupied molecular levels of the organic acceptor and also the bonding between the surface Zn atoms and the peripheral cyano groups. These combined experimental data and the theoretical analysis provide the so-far missing evidence of interfacial electron transfer from high ionization energy inorganic semiconductors to molecular acceptors and indicates that n-doping of ZnO plays a crucial role.

Orientation-Dependent Work-Function Modification Using Substituted Pyrene-Based Acceptors

The adsorption of molecular acceptors is a viable method for tuning the work function of metal electrodes. This, in turn, enables adjusting charge injection barriers between the electrode and organic semiconductors. Here, we demonstrate the potential of pyrene-tetraone (PyT) and its derivatives dibromopyrene-tetraone (Br-PyT) and dinitropyrene-tetraone (NO₂-PyT) for modifying the electronic properties of Au(111) and Ag(111) surfaces. The systems are investigated by complementary theoretical and experimental approaches, including photoelectron spectroscopy, the X-ray standing wave technique, and density functional theory simulations. For some of the investigated interfaces the trends expected for Fermi-level pinning are observed, i.e., an increase of the metal work function along with increasing molecular electron affinity and the same work function for Au and Ag with monolayer acceptor coverage. Substantial deviations are, however, found for Br-PyT/Ag(111) and NO₂-PyT/Ag(111), where in the latter case an adsorption-induced work function increase of as much as 1.6 eV is observed. This behavior is explained as arising from a face-on to edge-on reorientation of molecules in the monolayer. Our calculations show that for an edge-on orientation much larger work-function changes can be expected despite the prevalence of Fermi-level pinning. This is primarily ascribed to a change of the electron affinity of the adsorbate layer that results from a change of the molecular orientation. This work provides a comprehensive understanding of how changing the molecular electron affinity as well as the adsorbate structure impacts the electronic properties of electrodes.

Cooperative functions of the two F-BAR proteins Cip4 and Nostrin in the regulation of E-cadherin in epithelial morphogenesis

F-BAR proteins are prime candidates to regulate membrane curvature and dynamics during different developmental processes. Here, we analyzed nostrin, a so-far-unknown Drosophila melanogaster F-BAR protein related to Cip4. Genetic analyses revealed a strong synergism between nostrin and cip4 functions.Whereas single mutant flies are viable and fertile, combined loss of nostrin and cip4 results in reduced viability and fertility. Double mutant escaper flies show enhanced wing polarization defects and females exhibit strong egg chamber encapsulation defects. Live imaging analysis suggests that the observed phenotypes are caused by an impaired turnover of E-cadherin at the membrane. Simultaneous knockdown of Cip4 and Nostrin strongly increases the formation of tubular E-cadherin vesicles at adherens junctions. Cip4 and Nostrin localize at distinct membrane subdomains. Both proteins prefer similar membrane curvatures but seem to form distinct membrane coats and do not heterooligomerize. Our data suggest an important synergistic function of both F-BAR proteins in membrane dynamics. We propose a cooperative recruitment model, in which Cip4 initially promotes membrane invagination and early-actin-based endosomal motility, and Nostrin makes contacts with microtubules through the kinesin Khc-73 for trafficking of recycling endosomes.

In Vivo Evidence for Lysosome Depletion and Impaired Autophagic Clearance in Hereditary Spastic Paraplegia Type SPG11

Hereditary spastic paraplegia (HSP) is characterized by a dying back degeneration of corticospinal axons which leads to progressive weakness and spasticity of the legs. SPG11 is the most common autosomal-recessive form of HSPs and is caused by mutations in SPG11. A recent in vitro study suggested that Spatacsin, the respective gene product, is needed for the recycling of lysosomes from autolysosomes, a process known as autophagic lysosome reformation. The relevance of this observation for hereditary spastic paraplegia, however, has remained unclear. Here, we report that disruption of Spatacsin in mice indeed causes hereditary spastic paraplegia-like phenotypes with loss of cortical neurons and Purkinje cells. Degenerating neurons accumulate autofluorescent material, which stains for the lysosomal protein Lamp1 and for p62, a marker of substrate destined to be degraded by autophagy, and hence appears to be related to autolysosomes. Supporting a more generalized defect of autophagy, levels of lipidated LC3 are increased in Spatacsin knockout mouse embryonic fibrobasts (MEFs). Though distinct parameters of lysosomal function like processing of cathepsin D and lysosomal pH are preserved, lysosome numbers are reduced in knockout MEFs and the recovery of lysosomes during sustained starvation impaired consistent with a defect of autophagic lysosome reformation. Because lysosomes are reduced in cortical neurons and Purkinje cells in vivo, we propose that the decreased number of lysosomes available for fusion with autophagosomes impairs autolysosomal clearance, results in the accumulation of undegraded material and finally causes death of particularly sensitive neurons like cortical motoneurons and Purkinje cells in knockout mice.

Autophagy is a degradative pathway for the removal and subsequent recycling of dysfunctional intracellular components. The material destined for degradation is initially enclosed by a double membrane, the autophagosome. In autolysosomes, which result from fusion of autophagosomes with lysosomes, the material is finally broken down. Recent in vitro data suggested that the protein Spatacsin plays a pivotal role in the regeneration of lysosomes from autolysosomes. Spatacsin is encoded by SPG11, the most common gene mutated in autosomal recessive hereditary spastic paraplegia. Here we show that mice devoid of Spatacsin develop symptoms consistent with spastic paraplegia and progressively loose cortical motoneurons and Purkinje cells. In these mice degenerating neurons have a reduced number of lysosomes available for fusion with autophagosomes and consequently accumulate autolysosome-derived material over time. In the long term this causes death of particularly sensitive neurons like cortical motoneurons and Purkinje cells.

Efficient light emission from inorganic and organic semiconductor hybrid structures by energy-level tuning

The fundamental limits of inorganic semiconductors for light emitting applications, such as holographic displays, biomedical imaging and ultrafast data processing and communication, might be overcome by hybridization with their organic counterparts, which feature enhanced frequency response and colour range. Innovative hybrid inorganic/organic structures exploit efficient electrical injection and high excitation density of inorganic semiconductors and subsequent energy transfer to the organic semiconductor, provided that the radiative emission yield is high. An inherent obstacle to that end is the unfavourable energy level offset at hybrid inorganic/organic structures, which rather facilitates charge transfer that quenches light emission. Here, we introduce a technologically relevant method to optimize the hybrid structure's energy levels, here comprising ZnO and a tailored ladder-type oligophenylene. The ZnO work function is substantially lowered with an organometallic donor monolayer, aligning the frontier levels of the inorganic and organic semiconductors. This increases the hybrid structure's radiative emission yield sevenfold, validating the relevance of our approach.

Terminal axonal arborization and synaptic bouton formation critically rely on abp1 and the arp2/3 complex

Neuronal network formation depends on properly timed and localized generation of presynaptic as well as postsynaptic structures. Although of utmost importance for understanding development and plasticity of the nervous system and neurodegenerative diseases, the molecular mechanisms that ensure the fine-control needed for coordinated establishment of pre- and postsynapses are still largely unknown. We show that the F-actin-binding protein Abp1 is prominently expressed in the Drosophila nervous system and reveal that Abp1 is an important regulator in shaping glutamatergic neuromuscular junctions (NMJs) of flies. STED microscopy shows that Abp1 accumulations can be found in close proximity of synaptic vesicles and at the cell cortex in nerve terminals. Abp1 knock-out larvae have locomotion defects and underdeveloped NMJs that are characterized by a reduced number of both type Ib synaptic boutons and branches of motornerve terminals. Abp1 is able to indirectly trigger Arp2/3 complex-mediated actin nucleation and interacts with both WASP and Scar. Consistently, Arp2 and Arp3 loss-of-function also resulted in impairments of bouton formation and arborization at NMJs, i.e. fully phenocopied abp1 knock-out. Interestingly, neuron- and muscle-specific rescue experiments revealed that synaptic bouton formation critically depends on presynaptic Abp1, whereas the NMJ branching defects can be compensated for by restoring Abp1 functions at either side. In line with this presynaptic importance of Abp1, also presynaptic Arp2 and Arp3 are crucial for the formation of type Ib synaptic boutons. Interestingly, presynaptic Abp1 functions in NMJ formation were fully dependent on the Arp2/3 complex, as revealed by suppression of Abp1-induced synaptic bouton formation and branching of axon terminals upon presynaptic Arp2 RNAi. These data reveal that Abp1 and Arp2/3 complex-mediated actin cytoskeletal dynamics drive both synaptic bouton formation and NMJ branching. Our data furthermore shed light on an intense bidirectional functional crosstalk between pre- and postsynapses during the development of synaptic contacts.

A hereditary spastic paraplegia mouse model supports a role of ZFYVE26/SPASTIZIN for the endolysosomal system

Hereditary spastic paraplegias (HSPs) are characterized by progressive weakness and spasticity of the legs because of the degeneration of cortical motoneuron axons. SPG15 is a recessively inherited HSP variant caused by mutations in the ZFYVE26 gene and is additionally characterized by cerebellar ataxia, mental decline, and progressive thinning of the corpus callosum. ZFYVE26 encodes the FYVE domain-containing protein ZFYVE26/SPASTIZIN, which has been suggested to be associated with the newly discovered adaptor protein 5 (AP5) complex. We show that Zfyve26 is broadly expressed in neurons, associates with intracellular vesicles immunopositive for the early endosomal marker EEA1, and co-fractionates with a component of the AP5 complex. As the function of ZFYVE26 in neurons was largely unknown, we disrupted Zfyve26 in mice. Zfyve26 knockout mice do not show developmental defects but develop late-onset spastic paraplegia with cerebellar ataxia confirming that SPG15 is caused by ZFYVE26 deficiency. The morphological analysis reveals axon degeneration and progressive loss of both cortical motoneurons and Purkinje cells in the cerebellum. Importantly, neuron loss is preceded by accumulation of large intraneuronal deposits of membrane-surrounded material, which co-stains with the lysosomal marker Lamp1. A density gradient analysis of brain lysates shows an increase of Lamp1-positive membrane compartments with higher densities in Zfyve26 knockout mice. Increased levels of lysosomal enzymes in brains of aged knockout mice further support an alteration of the lysosomal compartment upon disruption of Zfyve26. We propose that SPG15 is caused by an endolysosomal membrane trafficking defect, which results in endolysosomal dysfunction. This appears to be particularly relevant in neurons with highly specialized neurites such as cortical motoneurons and Purkinje cells.

Hereditary spastic paraplegias (HSPs) are inherited disorders characterized by progressive weakness and spasticity of the legs. In HSP patients, nerve fibers connecting cortical motoneurons with spinal cord neurons are progressively lost. HSP subtype 15 (SPG15) is caused by mutations in ZFYVE26, and is characterized by additional cerebellar symptoms. We show that the Zfyve26 protein is broadly expressed in the brain. At the subcellular level Zfyve26 localizes to an intracellular compartment in the endocytic pathway from the plasma membrane to lysosomes, which is part of the degradative system of the cell. Closely resembling the human disease, mice deficient for Zfyve26 develop a progressive spastic gait disorder with cerebellar symptoms and degeneration of both neurons of the motor cortex and Purkinje cells in the cerebellum. Importantly, this degeneration is characterized by the intracellular accumulation of abnormal deposits, which stain positive for the lysosomal marker Lamp1. As Zfyve26 has been shown to interact with the newly identified adaptor complex AP5, which is supposed to be involved in cargo trafficking in the endolysosomal compartment, endolysosomal dysfunction may be caused by a targeting defect upon disruption of Zfyve26. As highly specialized neurons like cortical motoneurons and cerebellar Purkinje cells degenerate, these neurons appear to be particularly dependent on proper endolysosomal function.

A spastic paraplegia mouse model reveals REEP1-dependent ER shaping

Axonopathies are a group of clinically diverse disorders characterized by the progressive degeneration of the axons of specific neurons. In hereditary spastic paraplegia (HSP), the axons of cortical motor neurons degenerate and cause a spastic movement disorder. HSP is linked to mutations in several loci known collectively as the spastic paraplegia genes (SPGs). We identified a heterozygous receptor accessory protein 1 (REEP1) exon 2 deletion in a patient suffering from the autosomal dominantly inherited HSP variant SPG31. We generated the corresponding mouse model to study the underlying cellular pathology. Mice with heterozygous deletion of exon 2 in Reep1 displayed a gait disorder closely resembling SPG31 in humans. Homozygous exon 2 deletion resulted in the complete loss of REEP1 and a more severe phenotype with earlier onset. At the molecular level, we demonstrated that REEP1 is a neuron-specific, membrane-binding, and membrane curvature-inducing protein that resides in the ER. We further show that Reep1 expression was prominent in cortical motor neurons. In REEP1-deficient mice, these neurons showed reduced complexity of the peripheral ER upon ultrastructural analysis. Our study connects proper neuronal ER architecture to long-term axon survival.

Feasibility study of patient positioning verification in electron beam radiotherapy with an electronic portal imaging device (EPID)

The purpose of this study is to demonstrate the feasibility of verification and documentation in electron beam radiotherapy using the photon contamination detected with an electronic portal imaging device. For investigation of electron beam verification with an EPID, the portal images are acquired irradiating two different tissue equivalent phantoms at different electron energies. Measurements were performed on an Elekta SL 25 linear accelerator with an amorphous-Si electronic portal imaging device (EPID: iViewGT, Elekta Oncology Systems, Crawley, UK). As a measure of EPID image quality contrast (CR) and signal-to-noise ratio (SNR) are determined. For characterisation of the imaging of the EPID RW3 slabs and a Gammex 467 phantom with different material inserts are used. With increasing electron energy the intensity of photon contamination increases, yielding an increasing signal-to-noise ratio, but images are showing a decreasing contrast. As the signal-to-noise ratio saturates with increasing dose a minimum of 50 MUs is recommended. Even image quality depends on electron energy and diameter of the patient, the acquired results are mostly sufficient to assess the accuracy of beam positioning. In general, the online EPID acquisition has been demonstrated to be an effective electron beam verification and documentation method. The results are showing that this procedure can be recommended to be routinely and reliably done in patient treatment with electron beams.

The V-Y latissimus dorsi musculocutaneous flap in the reconstruction of large posterior chest wall defects

Posterior chest wall defects are frequently encountered after excision of tumors as a result of trauma or in the setting of wound dehiscence after spine surgery. Various pedicled fasciocutaneous and musculocutaneous flaps have been described for the coverage of these wounds. The advent of perforator flaps has allowed the preservation of muscle function but their bulk is limited. Musculocutaneous flaps remain widely employed. The trapezius and the latissimus dorsi (LD) flaps have been used extensively for upper and middle posterior chest wounds, respectively. Their bulk allows for obliteration of the dead space in deep wounds. The average width of the LD skin paddle is limited to 10-12 cm if closure of the donor site is expected without skin grafting. In 2001 a modification of the skin paddle design was introduced in order to allow large flaps to be raised without requiring grafts or flaps for donor site closure. This V-Y pattern allows coverage of large anterior chest defects after mastectomy. We have modified this flap to allow its use for posterior chest wall defects. We describe the flap design, its indications, and its limitations with three clinical cases.

LEVEL OF EVIDENCE V

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors at www.springer.com/00266.

SU-E-T-226: Clinical Implementation of a Gravity-Oriented Wedge for Total Body Irradiation

PURPOSE

To describe a TBI technique designed within the limits of a small-room geometry and its clinical implementation.

METHODS

Following construction of the universal treatment devices, including the double-wedge, beam spoiler table, and patient support table, commissioning consists of measurements to determine the output, tissue-phantom ratio, effective source distance, and off-axis factor. Dose is calculated by applying these factors per patient-specific measurements to arbitrary point in the patient. Typically, ten calculation points are located at mid-separation along the mid-sagittal plane from the head to the ankles. When areas of unacceptably high dose are calculated, custom compensators are constructed from 5-mm sheets of PMMA and placed over the patient on top of the beam spoiler table. The typical dose homogeneity of the planning calculations is within 2% of the prescribed dose.

RESULTS

To verify the accuracy of the technique, an anthropomorphic phantom was simulated and treated. In total, 128 thermoluminescent dosimeters (TLDs) were irradiated within the phantom. Concentrations of TLDs were located in the planes of selected calculation points, i.e. the head, neck, sternum, lung, umbilicus, and pelvis. Results showed the average dose to these locations differed from the intended dose by -3.5%, 3.4%, 2.6%, 9.5%, 2.8%, and 0.5%, respectively. Due to its heterogeneous material, a higher discrepancy in the lung dose was anticipated. To demonstrate the dosimetric size of the radiation field, ionization chamber measurements were taken on one lateral side of the treatment area at a constant depth of 5 cm. A few measurements on the contralateral side were within 1 %, verifying the field's lateral symmetry. The approximate treatment area for the current technique is approximately 180×50 cm.

CONCLUSIONS

We have demonstrated a small-room technique capable of meeting the dosimetric goal of TBI. To improve the dosimetric characteristics, new universal treatment devices are currently being designed and constructed.

Abp1 utilizes the Arp2/3 complex activator Scar/WAVE in bristle development

Many developmental processes rely on cortical actin dynamics; however, the mechanisms of its fine control at the cell cortex are still largely unknown. Our analyses demonstrate that the lipid- and F-actin-binding protein Abp1 is crucial for actin-driven bristle development in Drosophila melanogaster. Combined genetic, cell biological and biochemical analyses reveal that Abp1 triggers cortical Arp2/3-mediated actin nucleation by complex formation with Scar in bristle development. The role of the plasma-membrane-associated Abp1 subpool was highlighted by constitutively membrane-anchored Abp1. Such gain-of-function experiments led to a severe split-bristle phenotype, which was negatively correlated with bristle length. This phenotype was dependent on Scar but not on WASP and required the Scar-interacting SH3 domain of Abp1. Strikingly, knockout of abp1 led to defects in both microchaete and macrochaete bristle integrity. Importantly, Arp2- and Scar-deficient flies displayed similar bristle phenotypes. Microchaetes of flies deficient for Abp1, Arp2 and Scar functions had kinks, whereas those of wasp heterozygous flies did not. Electron microscopy analyses revealed that abp1 knockout, Arp2 RNAi and Scar RNAi all led to distorted macrochaetes with an excessive number of ridges. Interestingly, despite the physical association of Abp1 with Scar and its ability to use the Arp2/3 complex activator as an effector, abp1 knockout did not affect Scar stability. This is in contrast to classical Scar complex components, such as Kette or Sra-1. Our work reveals that Abp1 is an important, Scar-interacting factor controlling cortical Arp2/3-mediated actin nucleation and unravels a novel layer of complexity in the scrupulous control of cortical actin nucleation during sensory organ formation.