Copaifera langsdorffii Oleoresin-Loaded Nanostructured Lipid Carrier Emulgel Improves Cutaneous Healing by Anti-Inflammatory and Re-Epithelialization Mechanisms

The skin is essential to the integrity of the organism. The disruption of this organ promotes a wound, and the organism starts the healing to reconstruct the skin. Copaifera langsdorffii is a tree used in folk medicine to treat skin affections, with antioxidant and anti-inflammatory properties. In our study, the oleoresin of the plant was associated with nanostructured lipid carriers, aiming to evaluate the healing potential of this formulation and compare the treatment with reference drugs used in wound healing. Male Wistar rats were used to perform the excision wound model, with the macroscopic analysis of wound retraction. Skin samples were used in histological, immunohistochemical, and biochemical analyses. The results showed the wound retraction in the oleoresin-treated group, mediated by α-smooth muscle actin (α-SMA). Biochemical assays revealed the anti-inflammatory mechanism of the oleoresin-treated group, increasing interleukin-10 (IL-10) concentration and decreasing pro-inflammatory cytokines. Histopathological and immunohistochemical results showed the improvement of re-epithelialization and tissue remodeling in the Copaifera langsdorffii group, with an increase in laminin-γ2, a decrease in desmoglein-3 and an increase in collagen remodeling. These findings indicate the wound healing potential of nanostructured lipid carriers associated with Copaifera langsdorffii oleoresin in skin wounds, which can be helpful as a future alternative treatment for skin wounds.

Brazilian red propolis extract free and encapsulated into polymeric nanoparticles against ovarian cancer: formulation, characterisation and biological assays in 2D and 3D models

Cancer incidence worldwide is alarming and among the cancers that affect women ovarian cancer is the most fatal. Many side effects are associated with conventional therapies and none of them are completely effective, so the development of new treatments is necessary. Brazilian red propolis extract is a natural product with complex composition and great potential for cancer treatment. However, its clinical application is harmed due to unfavourable physicochemical characteristics. To enable its application encapsulation in nanoparticles can be used.

OBJECTIVES

The aims of this work were to develop polymeric nanoparticles with Brazilian red propolis extract and compare their action with the free extract against ovarian cancer cells.

METHODS

Box Behnken design was used and nanoparticles were characterised using the techniques dynamic light scattering, nanoparticle tracking analysis, transmission electron microscopy, differential scanning calorimetry and encapsulation efficiency. Activity against OVCAR-3 was also tested on 2D and 3D models.

KEY FINDINGS

Nanoparticles' sizes were ~200 nm with monomodal size distribution, negative zeta potential, spherical shape and with extract molecularly dispersed. Encapsulation efficiency was above 97% for the biomarkers chosen. Nanoparticles had greater efficacy in comparison with free propolis in OVCAR-3.

CONCLUSIONS

So far, the nanoparticles here described have the potential to be a chemotherapy treatment in the future.

Nanoparticle Systems for Cancer Phototherapy: An Overview

Photodynamic therapy (PDT) and photothermal therapy (PTT) are photo-mediated treatments with different mechanisms of action that can be addressed for cancer treatment. Both phototherapies are highly successful and barely or non-invasive types of treatment that have gained attention in the past few years. The death of cancer cells because of the application of these therapies is caused by the formation of reactive oxygen species, that leads to oxidative stress for the case of photodynamic therapy and the generation of heat for the case of photothermal therapies. The advancement of nanotechnology allowed significant benefit to these therapies using nanoparticles, allowing both tuning of the process and an increase of effectiveness. The encapsulation of drugs, development of the most different organic and inorganic nanoparticles as well as the possibility of surfaces' functionalization are some strategies used to combine phototherapy and nanotechnology, with the aim of an effective treatment with minimal side effects. This article presents an overview on the use of nanostructures in association with phototherapy, in the view of cancer treatment.

Hybrid Nanoparticles as an Efficient Porphyrin Delivery System for Cancer Cells to Enhance Photodynamic Therapy

Photodynamic therapy (PDT) is a potential non-invasive approach for application in oncological diseases, based on the activation of a photosensitizer (PS) by light at a specific wavelength in the presence of molecular oxygen to produce reactive oxygen species (ROS) that trigger the death tumor cells. In this context, porphyrins are interesting PS because they are robust, have high chemical, photo, thermal, and oxidative stability, and can generate singlet oxygen (1O2). However, porphyrins exhibit low solubility and a strong tendency to aggregate in a biological environment which limits their clinical application. To overcome these challenges, we developed hybrid nanostructures to immobilize 5,10,15,20-tetrakis[(4-carboxyphenyl) thio-2,3,5,6-tetrafluorophenyl] (P), a new third-generation PS. The biological effect of this system was evaluated against bladder cancer (BC) cells with or without light exposition. The nanostructure composed of lipid carriers coated by porphyrin-chitosan (P-HNP), presented a size of ca. 130 nm and low polydispersity (ca. 0.25). The presence of the porphyrin-chitosan (P-chitosan) on lipid nanoparticle surfaces increased the nanoparticle size, changed the zeta potential to positive, decreased the recrystallization index, and increased the thermal stability of nanoparticles. Furthermore, P-chitosan incorporation on nanoparticles increased the stability and enhanced the self-organization of the system and the formation of spherical structures, as observed by small-angle X-ray scattering (SAXS) analysis. Furthermore, the immobilization process maintained the P photoactivity and improved the photophysical properties of PS, minimizing its aggregation in the cell culture medium. In the photoinduction assays, the P-HNP displayed high phototoxicity with IC50 3.2-folds lower than free porphyrin. This higher cytotoxic effect can be correlated to the high cellular uptake of porphyrin immobilized, as observed by confocal images. Moreover, the coated nanoparticles showed mucoadhesive properties interesting to its application in vivo. Therefore, the physical and chemical properties of nanoparticles may be relevant to improve the porphyrin photodynamic activity in BC cells.

Synthesis and characterization of an experimental primer containing chitosan nanoparticles - Effect on the inactivation of metalloproteinases, antimicrobial activity and adhesive strength

OBJECTIVE

The aim of this study was to synthesize and characterize an experimental primer containing cationic lipid nanoparticles (NPL-chitosan) and to evaluate its properties.

DESIGN

The NPL-chitosan were synthesized by emulsion and sonication method. The experimental primers were applied in dentin surface of fifty human molars. The experimental groups were: 1) application of commercial primer; 2) Primer containing 2% of Chlorhexidine (CHX) 3); Primer with 2% NPL-chitosan 4); Primer with 0.6 % of NPL-chitosan 5); Primer with 0.4 % of NPL-chitosan. A composite resin plateau was used for the analysis, where sections were made for making the dentin beams. The effect of experimental primer with cationic nanoparticles in the inhibition of matrix metalloproteinase (MMP) activity was carrying out by in situ zymography. For the Resin-Dentin Adhesive Strength and in situ Zymography analysis, was used the One-way analysis of variance (ANOVA) with significance level of 95 %.

RESULTS

Spherical NPL-chitosan presented size below 220 nm, polydispersity index of 0.179 and zeta potential positive and was stable over 75 days. These nanoparticles showed antibacterial activity agsainst S. mutans with MIC of the 0.4 % and MBC of 0.67 %. In the Microtensile Strength, no statistical difference was observed between the experimental groups (p = 0.9054). The in situ zymography assay showed that the group with 2% of NPL-chitosan presented higher inactivation activity of MMPs compared to the other groups (p < 0.05).

CONCLUSION

The experimental primer containing NPL-chitosan has antimicrobial activity, does not alter the adhesive resistance and inactivates MMPs present in dentin.

Biosynthesis and characterization of gold nanoparticles using Brazilian red propolis and evaluation of its antimicrobial and anticancer activities

Gold nanoparticles (AuNPs) are highlighted due to their low toxicity, compatibility with the human body, high surface area to volume ratio, and surfaces that can be easily modified with ligands. Biosynthesis of AuNPs using plant extract is considered a simple, low-cost, and eco-friendly approach. Brazilian Red Propolis (BRP), a product of bees, exhibits anti-inflammatory, anti-tumor, antioxidant, and antimicrobial activities. Here, we described the biosynthesis of AuNPs using BRP extract (AuNPextract) and its fractions (AuNPhexane, AuNPdichloromethane, AuNPethyl acetate) and evaluated their structural properties and their potential against microorganisms and cancer cells. AuNPs showed a surface plasmon resonance (SPR) band at 535 nm. The sizes and morphologies were influenced by the BRP sample used in the reaction. FTIR and TGA revealed the involvement of bioactive compounds from BRP extract or its fractions in the synthesis and stabilization of AuNPs. AuNPdichloromethane and AuNPhexane exhibited antimicrobial activities against all strains tested, showing their efficacy as antimicrobial agents to treat infectious diseases. AuNPs showed dose-dependent cytotoxic activity both in T24 and PC-3 cells. AuNPdichloromethane and AuNPextract exhibited the highest in vitro cytotoxic effect. Also, the cytotoxicity of biogenic nanoparticles was induced by mechanisms associated with apoptosis. The results highlight a potential low-cost green method using Brazilian red propolis to synthesize AuNPs, which demonstrated significant biological properties.

Development of Photoprotective Formulations Containing Nanostructured Lipid Carriers: Sun Protection Factor, Physical-Mechanical and Sensorial Properties

The effects of ultraviolet (UV) radiation emitted by the sun are cumulative and can result in chemical changes such as the generation of reactive oxygen species (ROS), leading to the regular use of sunscreen. As an alternative, the use of antioxidants, such as quercetin, into sunscreen can control these effects and provide additional skin photoprotection. However, quercetin presents low stability and poor permeation, alternatively, the encapsulation in nanoparticles can improve the stability and skin permeation. Thus, this study aimed to develop photoprotective formulations containing nanoencapsulated quercetin, characterize the physical-mechanical and sensorial properties, and evaluate the influence of nanocarriers on sun protection factor (SPF) and the immediate clinical effects. Sunscreen formulations with or without antioxidants in a free form or loaded in nanostructured lipid carriers (NLCs) were developed. After the stability, rheological behavior, texture profile, and in vivo SPF (sun protector factor) evaluation, sixty female participants, aged between 20 and 35 years, were enclosed to evaluate the sensorial properties and immediate clinical effects of the formulation in the skin hydration using biophysical and skin imaging techniques. The correlation of rheological behavior, texture profile, and sensory properties enabled the correct choice of formulation ingredients. In addition, the use of NLCs with quercetin significantly improved the SPF in vivo of the developed photoprotective formulation, without increasing the amount of UV filters. Finally, the association of NLCs in the photoprotective formulation showed synergistic effects in the SPF and an improvement in the skin barrier function and hydration.

Targeted uptake of folic acid-functionalized polymeric nanoparticles loading glycoalkaloidic extract in vitro and in vivo assays

Solanum lycocarpum fruits contain two major glycoalkaloids (GAs), solamargine (SM) and solasonine (SS). These compounds are reported as cytotoxic. However, they have poor water solubility and low bioavailability. To overcome these disadvantages and getting an efficient formulation the current study aimed to develop, characterize, and test the effectiveness of a nanotechnology-based strategy using poly(D,L-lactide) (PLA) nanoparticles functionalized with folate as delivery system of glycoalkaloidic extract (AE) for bladder cancer therapy. The strategic of adding folic acid into nanoformulations can increase the selectivity of the compounds to the cancer cells reducing the side effects. Our results revealed the successful preparation of AE-loaded folate-targeted nanoparticles (NP-F-AE) with particle size around 177 nm, negative zeta potential, polydispersity index <0.20, and higher efficiency of encapsulation for both GAs present in the extract (>85 %). To investigate the cellular uptake, the fluorescent dye coumarin-6 was encapsulated into the nanoparticle (NP-F-C6). The cell studies showed high uptake of nanoparticles by breast (MDA-MB-231) and bladder (RT4) cancer cells, but not for normal keratinocytes cells (HaCaT) indicating the target uptake to cancer cells. The cytotoxicity of nanoparticles was evaluated on RT4 2D culture model showing 2.16-fold lower IC50 than the free AE. Furthermore, the IC50 increased on the RT4 spheroids compared to 2D model. The nanoparticles penetrated homogeneously into the urotheliumof porcine bladder. These results showed that folate-conjugated polymeric nanoparticles are potential carriers for targeted glycoalkaloidic extract delivery to bladder cancer cells.

Assessing the cytotoxic potential of glycoalkaloidic extract in nanoparticles against bladder cancer cells

OBJECTIVE

This study proposed to use the nanotechnology to deliver glycoalkaloidic extract (AE) to bladder cancer cells, evaluating their activity in 2D and 3D models and the biological mechanism of cell death.

METHODS

NPs were prepared by nanoprecipitation method using polylactic acid (PLA) and characterized considering their size, charge, particle concentration and stability. The cytotoxicity was evaluated in 2D and 3D model, and the apoptosis and cell cycle were investigated using flow cytometry.

KEY FINDINGS

NPs loading AE (NP-AE) had diameter around 125 ± 6 nm (PdI <0.1) and negative charge. The encapsulation efficiency of SM and SS was higher than 85% for both compounds. The obtained formulation showed a significant in-vitro cytotoxic effect against RT4 cells in a dose-dependent manner with IC₅₀ two fold lower than the free AE. The cytotoxic effect of NP-AE was mediated by apoptosis and cell cycle arrested in the S phase. RT4 cells cultured under 3D conditions exhibited a higher resistance to the treatments (IC₅₀ ~ three fold higher than in 2D cell culture).

CONCLUSION

The NP-AE might be a promising nanocarrier to load and deliver glycoalkaloids against bladder cancer.

Comparative Analysis of 3D Bladder Tumor Spheroids Obtained by Forced Floating and Hanging Drop Methods for Drug Screening

Introduction: Cell-based assays using three-dimensional (3D) cell cultures may reflect the antitumor activity of compounds more accurately, since these models reproduce the tumor microenvironment better.

Methods: Here, we report a comparative analysis of cell behavior in the two most widely employed methods for 3D spheroid culture, forced floating (Ultra-low Attachment, ULA, plates), and hanging drop (HD) methods, using the RT4 human bladder cancer cell line as a model. The morphology parameters and growth/metabolism of the spheroids generated were first characterized, using four different cell-seeding concentrations (0.5, 1.25, 2.5, and 3.75 × 10⁴ cells/mL), and then, subjected to drug resistance evaluation.

Results: Both methods generated spheroids with a smooth surface and round shape in a spheroidization time of about 48 h, regardless of the cell-seeding concentration used. Reduced cell growth and metabolism was observed in 3D cultures compared to two-dimensional (2D) cultures. The optimal range of spheroid diameter (300–500 μm) was obtained using cultures initiated with 0.5 and 1.25 × 10⁴ cells/mL for the ULA method and 2.5 and 3.75 × 10⁴ cells/mL for the HD method. RT4 cells cultured under 3D conditions also exhibited a higher resistance to doxorubicin (IC₅₀ of 1.00 and 0.83 μg/mL for the ULA and HD methods, respectively) compared to 2D cultures (IC₅₀ ranging from 0.39 to 0.43).

Conclusions: Comparing the results, we concluded that the forced floating method using ULA plates was considered more suitable and straightforward to generate RT4 spheroids for drug screening/cytotoxicity assays. The results presented here also contribute to the improvement in the standardization of the 3D cultures required for widespread application.

Cisplatin Properties in a Nanobiotechnological Approach to Cancer: A Mini-Review

For many years, cisplatin has been used to treat many types of cancer, including urogenital, skin and lung cancers. Unfortunately, treatment with this drug causes serious side effects, such as severe toxicity; including nephrotoxicity, neurotoxicity, gastrointestinal toxicity, peripheral neuropathy, ototoxicity, asthenia and hematological toxicity.Therefore, the clinical use of cisplatin has been hampered.The incidence of nephrotoxicity frequently prevents the use of high enough doses to maximize the antineoplastic effects, and strict attention must be given to the hydration of cisplatin-treated patients to minimize kidney damage.Nanobiotechnology, or nanomedicine, was developed to mitigate, or even eliminate,the toxic effects of pharmaceutical compounds; for example, drug-targeting systems were developed to enable site specificity and to control the delivery drug. Therefore, biomedical nanotechnology researchers attempted to develop nanostructures not only to deliver chemotherapeutics to the desired treatment site but also to control when and how quickly the compounds are released. To achieve these ends, a drug can either be encapsulated in a matrix or attached to a particle surface. Studies concerning the encapsulation of cisplatin in liposomes, polymeric nanoparticles, solid lipid nanoparticles and carbon nanotubes, as well as the immobilization of cisplatin on metallic nanoparticles, have already been published. The association of cancer treatment, particularly chemotherapeutics, with nanotechnology is currently one of the most exciting areas of research. In this mini-review, cisplatin will be discussed in terms of its efficacy against many cancers, including bladder cancer. Additionally, established nanostructure-based drug delivery systems for cisplatin and their efficacy against different types of cancer will be reviewed. Because cisplatin is a standard treatment with good performance statistics and with an effective renal function-glomerular filtration rate, we expect that this review will be helpful for future research.

Polymeric Nanoparticles of Enoxaparin as a Delivery System: In Vivo Evaluation in Normal Rats and in a Venous Thrombosis Rat Model

Enoxaparin is an anticoagulant widely used in the treatment and prophylaxis of deep vein thrombosis (DVT). The subcutaneous route of administration, sometimes in repeated doses during 24 hours, represents a limitation to its use. Thus, the development of a product that can be administered either subcutaneously, in a smaller number of applications becomes a major challenge, with interesting clinical applications. The use of a system for sustained release of drugs can help to meet that goal, by protecting and enabling a gradual released of the agent. This study consisted of the evaluation of in vivo anticoagulant and antithrombotic activity of biodegradable nanoparticles of poly (ε-caprolactone) (PCL) with enoxaparin after subcutaneous injection. The nanoparticles were prepared by the method of double emulsion (w/o/w) and solvent evaporation. Subcutaneous enoxaparin encapsulated in PCL nanoparticles (1000 IU/kg) showed a sustained release in vivo for up to 12 hours (Cmax 0.62 IU/mL) a significantly longer period (P < 0.01) when compared to free enoxaparin (1000 IU/Kg) that disappeared after 9 hours (Cmax 1.50 IU/mL), however with lower anti-Xa activity. The antithrombotic action of enoxaparin-nanoparticles was tested in a DVT model by stasis in rats. There were virtually no formation of venous thrombosis in any of the rats that received enoxaparin encapsulated in nanoparticles (0.03 mg), with a significant difference when compared to groups that received saline (17.2 mg, P < 0.001) and free enoxaparin (2.87 mg, P = 0.001). In summary, enoxaparin-encapsulated in polymeric nanoparticles showed a sustained release for a greater period than that of enoxaparin, and with excellent antithrombotic action. These results corroborate the promising use of pharmacological nanoparticles in clinical practice.

Preparation of an agar-silver nanoparticles (A-AgNp) film for increasing the shelf-life of fruits

Preparation of protective coating possessing antimicrobial properties is present day need as they increase the shelf life of fruits and vegetables. In the present study, preparation of agar-silver nanoparticle film for increasing the shelf life of fruits is reported. Silver nanoparticles (Ag-NPs) biosynthesised using an extract of Ocimum sanctum leaves, were mixed with agar-agar to prepare an agar-silver nanoparticles (A-AgNp) film. This film was surface-coated over the fruits, Citrus aurantifolium (Thornless lime) and Pyrus malus (Apple), and evaluated for the determination of antimicrobial activity of A-AgNp films using disc diffusion method, weight loss and shelf life of fruits. This study demonstrates that these A-AgNp films possess antimicrobial activity and also increase the shelf life of fruits.

Nanostructured polymer and lipid carriers for sunscreen. Biological effects and skin permeation

The interest in developing new sunscreens is increasing due to the harmful effects of UV radiation on the skin, such as erythema, accelerated skin ageing (photoageing) and the induction of skin cancer. However, many molecular sunscreens penetrate into the skin causing photoallergies, phototoxic reactions and skin irritation. Thus, the aim of this work was the preparation and characterization of polymeric and solid lipid nanoparticles to act carriers of benzophenone-3 (BZ3), aiming to improve the safety of sunscreen products by increasing the sun protection factor (SPF), decreasing BZ3 skin penetration and decreasing BZ3 concentration in sunscreen formulation. BZ3 was encapsulated in poly(epsilon-caprolactone) (PCL) nanoparticles by the nanoprecipitation method and in solid lipid nanoparticles (SLN) by the hot high pressure homogenization method. The particles were stable for 40 days. The BZ3 encapsulated in PCL nanoparticles was released faster than BZ3 encapsulated in SLN. The sun protection factor increased when BZ3 was encapsulated in both nanostructures. However, BZ3 encapsulated in PCL nanoparticles decreased its skin permeation more than SLN-BZ3. Furthermore, BZ3 encapsulated in SLN did not exhibit cytotoxic or phototoxic effects in human keratinocytes (HaCaT cells) and BABL/c 3T3 fibroblasts, whereas PCL nanoparticles with BZ3 showed phototoxic potential in HaCaT cells. Nevertheless, BZ3 free and encapsulated in PCL nanoparticles or in SLN did not show allergic reactions in mice. Our results suggest that these nanostructures are interesting carriers for sunscreen.

Microencapsulation of antibiotic rifampicin in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The aim of this study was the preparation of microparticles containing rifampicin using a biodegradable polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) for oral administration produced by a bacteria. The poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles with and without rifampicin were prepared by the emulsification and solvent evaporation method, in which chloroform and polyvinyl alcohol are used as the solvent and emulsifier, respectively. Microparticles were obtained within a size range of 20-60 microm by changing the initial poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polyvinyl alcohol and rifampicin concentrations. An encapsulation efficiency value of 14% was obtained. The optimized total yield of 60% of the poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/ rifampicin was obtained. A load of 0.035 mg/1 mg of PHBV was reached. Almost 90% of the drug loaded in the microparticles was released after 24 h. The size, encapsulation efficiency and ribampicin release of the microparticles varied as a function of the initial poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polyvinyl alcohol and rifampicin concentrations. It was demonstrated that the microencapsulated rifampicin, although was not totally available in the medium, exhibited a similar inhibition value as free rifampicin at 24 h of incubation with S. aureus. Cytotoxicity assays demonstrated a reduction of the toxicity when rifampicin was microencapsulated in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) while maintaining its antibacterial activity.

New aspects of nanopharmaceutical delivery systems

Nanobiotechnology, involving biological systems manufactured at the molecular level, is a multidisciplinary field that has fostered the development of nanoscaled pharmaceutical delivery devices. Micelles, liposomes, solid lipid nanoparticles, polymeric nanoparticles, functionalized nanoparticles, nanocrystals, cyclodextrins, dendrimers, nanotubes and metallic nanoparticles have been used as strategies to deliver conventional pharmaceuticals or substances such as peptides, recombinant proteins, vaccines and nucleotides. Nanoparticles and other colloidal pharmaceutical delivery systems modify many physicochemical properties, thus resulting in changes in the body distribution and other pharmacological processes. These changes can lead to pharmaceutical delivery at specific sites and reduce side effects. Therefore, nanoparticles can improve the therapeutic efficiency, being excellent carriers for biological molecules, including enzymes, recombinant proteins and nucleic acid. This review discusses different pharmaceutical carrier systems, and their potential and limitations in the field of pharmaceutical technology. Products with these technologies which have been approved by the FDA in different clinical phases and which are on the market will be also discussed.

Poly (epsilon-caprolactone)/propolis extract: microencapsulation and antibacterial activity evaluation

Spherical and homogenous microparticles of poly(epsilon-caprolactone) (PCL), containing propolis were prepared by the emulsification-solvent evaporation technique. Using this method of preparation, a solid formulation of propolis, free of ethanol and suitable for manipulation and storage, was obtained from an ethanolic extract of propolis. The incorporation efficiency of propolis in the microparticles was almost 30% and around 60% of the substance was released in 48 h. In vitro propolis microparticles exhibited similar halo zones in the Petri plate test against Streptococcus mutans (GS5) with a 10-fold lower concentration than the free propolis extract showing that the encapsulated propolis in microparticles is more efficient as antibiotic.

Mechanistic aspects of biosynthesis of silver nanoparticles by several Fusarium oxysporum strains

Extracellular production of metal nanoparticles by several strains of the fungus Fusarium oxysporum was carried out. It was found that aqueous silver ions when exposed to several Fusarium oxysporum strains are reduced in solution, thereby leading to the formation of silver hydrosol. The silver nanoparticles were in the range of 20–50 nm in dimensions. The reduction of the metal ions occurs by a nitrate-dependent reductase and a shuttle quinone extracellular process. The potentialities of this nanotechnological design based in fugal biosynthesis of nanoparticles for several technical applications are important, including their high potential as antibacterial material.