Spark plasma sintered porous Ni as a novel substrate of Ni3Se2@Ni self-supporting electrode for ultra-durable hydrogen evolution reaction

Developing efficient and durable self-supporting catalytic electrodes is an important way for industrial applications of hydrogen evolution reaction. Currently, commercial nickel foam (NF)-based electrode has been widely used due to its good catalytic performance. However, the NF consisting of smooth skeleton surface and large pores not only exhibits poor conductivity but also provides insufficient space for catalyst decoration and sufficient adhesion, resulting in inadequate catalytic performance and poor durability of NF-based electrodes. In this paper, a novel three-dimensional porous Ni substrate with multangular skeleton surface and small pore structure was prepared by a modified spark plasma sintering technique, and subsequently Ni3Se2@Porous Ni electrode with a large number of Ni3Se2 nanosheets uniformly distributed on the surface was obtained by one-step in-situ selenization. The electrode exhibits outstanding conductivity and catalytic hydrogen evolution reaction, providing a low overpotential of 183 mV at a current density of 100 mA cm-2. Due to the strong interfacial bonding between Ni and Ni3Se2, the Ni3Se2@Porous Ni electrode shows strong durability, which can work stably at 85 mA cm-2 for more than 200 h. This work provides an effective strategy for the rational preparation of metal substrates for efficient and durable self-supporting catalytic electrodes.

Analysis of the effect of flow channel structures on the centrifugal accelerated motion of particles in a vacuum state

In this study, the impact of flow channel structures on the acceleration of metal particles in a vacuum environment is explored, with the aim of enhancinge the acceleration quality in the centrifugal impact molding of metal powders. To assess this phenomenon, three evaluation indices are introduced: the average speed of particles thrown V p , the average speed of the particles V all , and the particle velocity distribution Vf (t). Additionally, the effects of six distinct runner structures on the centrifugal acceleration of the particles are analyzed in this research. The findings indicate that the arc-shaped flow channel structure not only ensures a more consistent acceleration process but also results in a higher ejection speed, leading to an improved acceleration effect. The unique contribution of this study is the examination of the relationship between flow channel designs and particle accelerations in a vacuum.

Benefit and harm of low-dose aspirin in pregnancy: a balancing act

Linked article: This Correspondence comments on Souter et al. Click here to view the article.

Full sample analysis of cerebral venous sinus thrombosis in ophthalmology inpatients

PURPOSE

We hope that by analyzing the clinical features of cerebral venous sinus thrombosis (CVST), we can help ophthalmologists reduce misdiagnosis or delayed diagnosis.

DESIGN

We evaluated 47 patients with CVST in terms of clinical manifestations.

METHODS

All cases were analyzed in terms of risk factors, clinical symptoms, ophthalmic examination, imaging examination and lumbar puncture.

RESULTS

The body mass indices (BMIs) of 41 patients (87.2%; 95% CI, 77.7-96.8%) were≥24, which is overweight by Chinese standards. There were 22 patients (46.8%; 95% CI, 32.5-61.1%) with BMIs≥28, who were considered obese. Thirteen were hypertensive (27.7%; 95% CI, 14.9-40.5%). The initial symptoms included blurred vision (23, 48.9%; 95% CI, 34.6-63.2%), amaurosis fugax (13, 27.7%; 95% CI, 14.9-40.5%), headache (11 patients, 23.4%; 95% CI, 11.3-35.5%), dizziness (3, 6.4%; 95% CI, -0.6-13.4%), and bilateral diplopia (3, 6.4%; 95% CI, -0.6-13.4%). There were 9 patients (9, 19.2%; 95% CI, 7.9-30.4%) with blindness, 23 patients (48.9%; 95% CI, 34.6-63.2%) with pupillary abnormalities, and 40 patients (85.1%; 95% CI, 74.9-95.2%) with papilledema. Forty-three of the 45 patients who successfully underwent a routine lumbar puncture showed high intracranial pressure (91.7%; 95.6% CI, 89.6-101.6%). Finally, two cases are reported in greater detail for illustrative purposes.

CONCLUSION

The main reasons interfering with the diagnosis of CVST might be its nonspecific ocular symptoms and the physicians' clinical thought process being limited to the scope of common ophthalmological diseases.

Trifunctional L-Cysteine Assisted Construction of MoO2 /MoS2 /C Nanoarchitecture Toward High-Rate Sodium Storage

The volume collapse and slow kinetics reaction of anode materials are two key issues for sodium ion batteries (SIBs). Herein, an "embryo" strategy is proposed for synthesis of nanorod-embedded MoO2 /MoS2 /C network nanoarchitecture as anode for SIBs with high-rate performance. Interestingly, L-cysteine which plays triple roles including sulfur source, reductant, and carbon source can be utilized to produce the sulfur vacancy-enriched heterostructure. Specifically, L-cysteine can combine with metastable monoclinic MoO3 nanorods at room temperature to encapsulate the "nutrient" of MoOx analogues (MoO2.5 (OH)0.5 and MoO3 ·0.5H2 O) and hydrogen-deficient L-cysteine in the "embryo" precursor affording for subsequent in situ multistep heating treatment. The resultant MoO2 /MoS2 /C presents a high-rate capability of 875 and 420 mAh g-1 at 0.5 and 10 A g-1 , respectively, which are much better than the MoS2 -based anode materials reported by far. Finite element simulation and analysis results verify that the volume expansion can be reduced to 42.8% from 88.8% when building nanorod-embedded porous network structure. Theoretical calculations reveal that the sulfur vacancies and heterointerface engineering can promote the adsorption and migration of Na+ leading to highly enhanced thermodynamic and kinetic reaction. The work provides an efficient approach to develop advanced electrode materials for energy storage.

One-step Sintering Synthesis of Ni3 Se2 -Ni Electrode with Robust Interfacial Bonding for Ultra-stable Hydrogen Evolution Reaction

Exploring efficient and robust self-supporting hydrogen evolution reaction (HER) electrodes using simple, accessible, and low-cost synthetic processes is crucial for the commercial application of water electrolysis at high current densities. Ni-based self-supporting electrodes are widely studied owing to their low cost and good catalytic performance. However, to date, the preparation of Ni-based electrodes requires multistep and complex preparation processes. In this study, a novel one-step in situ sintering method to synthesize mechanically stable and highly active Ni3 Se2 -Ni electrodes with well-controlled morphologies and structures is developed. Their excellent performance and durability can be attributed to the numerous highly active nano-Ni3 Se2 catalysts embedded on the surface of the Ni skeleton, the excellent conductivity of the interconnected conductive network, and the strong interfacial bonding between Ni3 Se2 and Ni. As a result, the Ni3 Se2 -Ni600 electrode can operate stably at 85 and 400 mA cm-2 for more than 800 and 300 h, respectively. Moreover, the Ni3 Se2 -Ni600 electrode displays outstanding stability for over 500 h in a commercial two-electrode system. This study provides a feasible one-step synthesis method for low-cost, high-efficiency metal selenide-metal self-supporting electrodes for water electrolysis.

Optimizing of particle accelerated rotor parameters using the discrete element method

The acceleration capability of a centrifugal jet rotor plays a crucial role in achieving a high injection velocity of powder particles in the centrifugal impact moulding process. In this regard, the focus of this article is on optimization of the runner shape. To this end, the lengths of the first and second acceleration sections (L1 and L2), and the angles between the first and second acceleration sections and between the second and third sections (α1 and α2) are considered as the rotor parameters. Simulations were conducted using multiple discrete elements to explore the influence of multiple input parameters on the response value, and a regression model was established between the parameters and the particle injection rate. The experimental results show that the selected parameters significantly affect the rate of particle injection, and the interactions between the parameters L1 and L2, and between L2 and α2 have the largest effects. The results reveal that applying the optimized parameters improves the particle injection speed by 7.85% when compared to the pre-optimization model. This improvement in the rotor acceleration provides the basis for improving the efficiency of centrifugal impact moulding of metal powders.

A Rational Design of a CoS2-CoSe2 Heterostructure for the Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries

Lithium-sulfur batteries are anticipated to be the next generation of energy storage devices because of their high theoretical specific capacity. However, the polysulfide shuttle effect of lithium-sulfur batteries restricts their commercial application. The fundamental reason for this is the sluggish reaction kinetics between polysulfide and lithium sulfide, which causes soluble polysulfide to dissolve into the electrolyte, leading to a shuttle effect and a difficult conversion reaction. Catalytic conversion is considered to be a promising strategy to alleviate the shuttle effect. In this paper, a CoS₂-CoSe₂ heterostructure with high conductivity and catalytic performance was prepared by in situ sulfurization of CoSe₂ nanoribbon. By optimizing the coordination environment and electronic structure of Co, a highly efficient CoS₂-CoSe₂ catalyst was obtained, to promote the conversion of lithium polysulfides to lithium sulfide. By using the modified separator with CoS₂-CoSe₂ and graphene, the battery exhibited excellent rate and cycle performance. The capacity remained at 721 mAh g^-1 after 350 cycles, at a current density of 0.5 C. This work provides an effective strategy to enhance the catalytic performance of two-dimensional transition-metal selenides by heterostructure engineering.

Dual CoxSy-Modified Tungsten Disulfide Double-Heterojunction Electrocatalyst for Efficient Hydrogen Evolution in All-pH Media

The rational design and preparation of a heterogeneous electrocatalyst for hydrogen evolution reaction (HER) has become a research hotspot, while applicable and pH-universal tungsten disulfide (WS₂)-based hybrid composites are rarely reported. Herein, we propose a novel hybrid catalyst (WS₂/Co₉S₈/Co₄S₃) comprising two heterojunctions of WS₂/Co₄S₃ and WS₂/Co₉S₈, which grow on the porous skeleton of Co, N-codoped carbon (Co/NC) flexibly applicable to all-pH electrolytes. The effect of double heterogeneous coupling on HER activity is explored as the highly flexible heterojunction is conducive to tune the activity of the catalyst, and the synergistic interaction of the double heterojunctions is maximized by adjusting the proportion of heterojunction components. Theoretical calculations show that both WS₂/Co₉S₈ and WS₂/Co₄S₃ heterojunctions have a Gibbs free energy of H reaction (|ΔG_H*|) close to 0.0 eV and a facile decomposition water barrier. As collective synergy of dual Co_xS_y-modified WS₂ double heterojunction, WS₂/Co₉S₈/Co₄S₃ greatly enhances HER activity compared to bare Co₉S₈/Co₄S₃ or single heterojunction (WS₂/Co₉S₈) in all-pH media. Besides, we have elucidated the unique HER mechanism of the double heterojunction to decompose H₂O and confirm its excellent activity under alkaline and neutral conditions. Thus, this work provides new insights into WS₂-based hybrid materials potentially applied to sustainable energy.

Energy Conversion and Transfer in the Luminescence of CeSc3(BO3)4:Cr3+ Phosphor

Novel near-infrared (NIR) phosphors are in demand for light-emitting diode (LED) devices to extend their suitability for new applications and, in turn, support the sustainable and healthy development of the LED industry. The Cr³⁺ has been used as an activator in the development of new NIR phosphors. However, one main obstacle for the Cr³⁺-activated phosphors is the low luminescence efficiency due to the spin-forbidden d-d transition of Cr³⁺. The rare-earth (RE) huntite minerals that crystallize in the form of REM₃(BO₃)₄ (M = Al, Sc, Cr, Fe, Ga) have a large family of members, including the rare-earth scandium borates of RESc₃(BO₃)₄. Interestingly, in our research, we found that the luminescence efficiency of Cr³⁺ in the CeSc₃(BO₃)₄ host, whose quantum yield was measured at 56%, is several times higher than that in GdSc₃(BO₃)₄, TbSc₃(BO₃)₄, and LuSc₃(BO₃)₄ hosts. Hereby, the energy conversion and transfer in the luminescence of CeSc₃(BO₃)₄:Cr³⁺ phosphor were examined. The Stokes shift of electron energy conversion within the Cr^{3+ 4}T_2g level for the emission at 818 nm and excitation at 625 nm in CeSc₃(BO₃)₄ host was evaluated to be 3775.1 cm^-1, and the super-large splitting energy of the ²F_5/2 and ²F₇₂ sub-states of the Ce³⁺ 4f¹ state, about 3000 cm^-1, was found in CeSc₃(BO₃)₄ host. The typical electronic thermal vibration peaks were observed in the excitation spectra of CeSc₃(BO₃)₄:Cr³⁺. On this basis, the smallest phonon energy, around 347.7 cm^-1, of the CeSc₃(BO₃)₄ host was estimated. Finally, the energy transfer that is responsible for the far higher photoluminescence of Cr³⁺ in CeSc₃(BO₃)₄ than in other hosts was proven through the way of Ce³⁺ emission and Cr³⁺ reabsorption.

Microstructure and Mechanical Properties of W-Al2O3 Alloy Plates Prepared by a Wet Chemical Method and Rolling Process

The uneven distribution and large size of the second phase weakens the effect of dispersion strengthening in ODS-W alloys. In this article, the W-Al₂O₃ composite powders were fabricated using a wet chemical method, resulting in a finer powder and uniformly dispersed Al₂O₃ particles in the tungsten-based alloy. The particle size of the pure tungsten powder is 1.05 μm and the particle size of W-0.2 wt.%Al₂O₃ is 727 nm. Subsequently, the W-Al₂O₃ alloy plates were successfully obtained by induction sintering and rolling processes. Al₂O₃ effectively refined grain size from powder-making to sintering. The micro-hardness of the tungsten alloy plates reached 512 HV_0.2, which is 43.7% higher than that of pure tungsten plates. The nano-hardness reached 14.2 GPa, which is 24.1% higher than that of the pure tungsten plate; the compressive strength reached 2224 MPa, which is 37.2% higher than that of the pure tungsten.

Impacts of menopause hormone therapy on mood disorders among postmenopausal women

OBJECTIVE

This study aimed to explore the modulatory effects of menopause hormone therapy (MHT) on mood disorders among postmenopausal women.

METHODS

A cross-sectional study was conducted to recruit postmenopausal women, including patients (arranged MHT for over 3 years as the medication group) and non-MHT controls. All participants were asked to respond to the Center for Epidemiological Studies Depression Scale (CES-D) and Generalized Anxiety Disorder Screener (GAD-7) questionnaires to assess their depression and anxiety status.

RESULTS

A total of 230 cases from the two groups were determined based on propensity score matching analysis by matching the menopausal age and menopausal durations. We found that MHT served as a favorable modulator in the depression status of postmenopausal women. Among the four factors of the CES-D questionnaire, our data indicated that the differences between the two groups fell primarily into two aspects: depressive emotion, and somatic symptoms or retarded activities. MHT was mainly involved in improving the depression of overweight women. However, no substantial effects of MHT were observed on the regulation of anxiety.

CONCLUSION

Postmenopausal women, especially the overweight population, who have experienced MHT exhibited an improved depressive status but not their anxiety condition.

Interface Microstructure and Mechanical Properties of Al/Steel Bimetallic Composites Fabricated by Liquid-Solid Casting with Rare Earth Eu Additions

To improve the Al/Steel bimetallic interface, Eu was firstly added to the Al/Steel bimetallic interface made by liquid-solid casting. The effects of Eu addition on the microstructure, mechanical capacities, and rupture behavior of the Al/Steel bimetallic interface was studied in detail. As the addition of 0.1 wt.% Eu, the morphology of eutectic Si changed from coarse plate-like to fine fibrous and granular in Al-Si alloys, and the average thickness of the intermetallic compounds layer decreased to a minimum value of 7.96 μm. In addition, there was a more sudden drop of Fe in steel side and the Si in Al side was observed to be more than the other conditions. The addition of Eu did not change the kinds of intermetallic compounds in the Al/steel reaction layer, which was composed of Al₅Fe₂, τ₁-(Al, Si)₅Fe₃, Al₁₃Fe₄, τ₅-Al₇Fe₂Si, and τ₆-Al₉Fe₂Si₂ phases. The addition of the element Eu did not change the preferential orientation of the Al₅Fe₂, τ₁-(Al, Si)₅Fe₃, Al₁₃Fe₄, τ₅-Al₇Fe₂Si, and τ₆-Al₉Fe₂Si₂ phases, but refined the grain size of each phase and decreased the polar density of Al₅Fe₂ phase. Eu was mainly enriched in the front of the ternary compound layer (τ₆-Al₉Fe₂Si₂) near the Al side and steel matrix. The Fe and Al element distribution area tended to narrow in the interface after the addition of 0.1 wt.% Eu, which is probably because that Eu inhibits the spread of Al atoms along the c-axis direction of the Al₅Fe₂ phase and the growth of Al₁₃Fe₄, τ₅-Al₇Fe₂Si, and τ₆-Al₉Fe₂Si₂ phases. When the Eu content was 0.1 wt.%, the shear strength of the Al/Steel bimetal achieved a maximum of 31.21 MPa, which was 47% higher than the bimetal without Eu.

Video-assisted superior mediastinal lymphadenectomy for papillary thyroid cancer: a case report

Superior mediastinal lymph node metastases in papillary thyroid cancer are uncommon. The clinical characteristics and surgical strategy of superior mediastinal lymph node metastases remain unclear. Superior mediastinal lymphadenectomy can be accomplished either by a transcervical or transsternal approach. Transsternal approach for superior mediastinal lymphadenectomy can cause great damage; transcervical approach sometimes results in inadequate exposure. Here we report our experience of a papillary thyroid cancer patient with superior mediastinal lymph node metastases who underwent video-assisted superior mediastinal lymphadenectomy. A 49-year-old woman diagnosed with papillary thyroid cancer in left thyroid underwent unilateral lobectomy and ipsilateral central and lateral node dissection in the local hospital 4 years ago. Currently lymph node metastases were found in mediastinum and the right neck, some of which were adjacent to the right innominate vein. Unilateral lobectomy, ipsilateral central and lateral node dissection, and video-assisted superior mediastinal lymphadenectomy were successfully performed by transcervical approach. Subsequently, the patient received thyroxine suppression therapy and adjuvant radioiodine treatment. Video-assisted superior mediastinal lymphadenectomy, providing adequate exposure for a complete superior mediastinal lymphadenectomy, is proved to be safe and feasible.

CARBONATED BEVERAGES AFFECT LEVELS OF ANDROGEN RECEPTOR AND TESTOSTERONE SECRETION IN MICE

Objectives

This work aimed to study the influences of carbonated beverages (CBs) on the testis growth and the expression levels of androgen receptor (AR) of mice.

Methods

Two experimental groups of 30 mice each PEP-1 and PEP-2 drank 50% and 100% Pepsi-Cola, respectively for 15 days. Other 2 experimental groups of 30 mice each COC-1 and COC-2 drank 50% and 100% Coca-Cola, respectively for 15 days. The control group (CG) of 30 mice drank water. Bilateral testes were harvested aseptically on days 0, 5, 7, 10, 13 and 15. Real-time PCR and Western blot were implemented to detect levels of androgen receptor (AR) mRNA and protein in testis tissues.

Results

Testes masses of PEP-2, COC-1 and COC-2 were greater than those of PEP-1 and CG (P < 0.05). On day 15, testis longitudinal diameter (TLD) of CBs-treated mice was increased as compared to CG. TLD, testes transverse diameters (TTD) and AR proteins levels of PEP-2 and COC-2 were increased in comparison with CG (P<0.05). Serum testosterone concentrations of PEP-2 were higher than that of COC-1 and CG (P < 0.05). Levels of AR mRNAs of four CBs-treated mice were increased by 60.18%, 67.26%, 65.93% and 78.76%.

Conclusions

A high concentration of Coca-Cola and Pepsi-Cola could raise TLD and TDD, enhance testosterone secretion, and increase serum EGF concentrations.

The adaptation to freezing tolerance of hydrated lettuce seeds: effects of regional climate and of seed characteristics

BACKGROUND

With global warming, soil seed banks at high altitudes face dual challenges, excessive water absorption and thinner snow cover that increase underground temperature. A better understanding of freezing tolerance of hydrated seeds provides insights for conservation in natural soil seed banks.

OBJECTIVE

To understand the adaptation mechanisms of seed freezing tolerance under various climates, in relation to cooling rate and seed size.

MATERIALS AND METHODS

Twelve ecotypes of lettuce (Lactuca sativa) seeds were collected from different geographical locations around the world. Seeds were fully hydrated and tested for their freezing tolerance using programmed cooling methods.

RESULTS

The size of seeds from different climate regions varied, and was correlated with the freezing tolerance of the hydrated seeds (P < 0.05). Larger seeds showed poorer freezing tolerance. The local climates of maternal plants were also well correlated to seed freezing tolerance (P < 0.05), especially under slow cooling conditions. The seeds collected in regions with high spring rainfall exhibited greater freezing tolerance.

CONCLUSION

Freezing tolerance of hydrated seeds is affected by the climate of maternal plants and by seed size. Our data revealed the existence of an adaptation mechanism of freezing tolerance among various ecotypes of lettuce seeds. doi.org/10.54680/fr22410110412.

Few-Layered WS2 Anchored on Co, N-Doped Carbon Hollow Polyhedron for Oxygen Evolution and Hydrogen Evolution

Tungsten disulfide (WS₂) is well known to have great potential as an electrocatalyst, but the practical application is hampered by its intrinsic inert plane and semiconductor properties. In this work, owing to a Co-based zeolite imidazole framework (ZIF-67) that effectively inhibited WS₂ growth, few-layered WS₂ was confined to the surface of Co, N-doped carbon polyhedron (WS₂@Co₉S₈), with more marginal active sites and higher conductivity, which promoted efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). For the first time, WS₂@Co₉S₈ was prepared by mixing in one pot of a liquid phase and calcination, and WS₂ realized uniform distribution on the polyhedron surface by electrostatic adsorption in the liquid phase. The obtained hybrid catalyst exhibited excellent OER and HER catalytic activity, and the OER potential was only 15 mV at 10 mA cm^-2 higher than that of noble metal oxide (RuO₂). The improvement of catalytic activity can be attributed to the enhanced exposure of sulfur edge sites by WS₂, the unique synergistic effect between WS₂ and Co₉S₈ on the metal-organic framework (MOF) surface, and the effective shortening of the diffusion path by the hollow multi-channel structure. Therefore, the robust catalyst (WS₂@Co₉S₈) prepared by a simple and efficient synthesis method in this work will serve as a highly promising bifunctional catalyst for OER and HER.

Association of prenatal renal ultrasound abnormalities with pathogenic copy number variants in a large Chinese cohort

OBJECTIVES

To assess the clinical utility of prenatal chromosomal microarray analysis (CMA) in fetuses with abnormal renal sonographic findings, and to evaluate the association of pathogenic or likely pathogenic copy number variants (P/LP CNVs) with different types of renal abnormality.

METHODS

This was a retrospective study of fetuses at 14-36 weeks screened routinely for renal and other structural abnormalities at the Maternal and Child Health Hospital of Guangxi Zhuang Autonomous Region. We retrieved and analyzed data from fetuses with abnormal renal sonographic findings, examined between January 2013 and November 2019, which underwent CMA analysis using tissue obtained from chorionic villus sampling (CVS), amniocentesis or cordocentesis. We evaluated the CMA findings according to type of renal ultrasound anomaly and according to whether renal anomalies were isolated or non-isolated.

RESULTS

Ten types of renal anomaly were reported on prenatal ultrasound screening, at a mean ± SD gestational age of 24.9 ± 4.8 weeks. The anomalies were diagnosed relatively late in this series, as 64% of cases with an isolated renal anomaly underwent cordocentesis rather than CVS. Fetal pyelectasis was the most common renal ultrasound finding, affecting around one-third (34.32%, 301/877) of fetuses with a renal anomaly, but only 3.65% (n = 11) of these harbored a P/LP CNV (comprising: isolated cases, 2.37% (4/169); non-isolated cases, 5.30% (7/132)). Hyperechogenic kidney was found in 5.47% (n = 48) of fetuses with a renal anomaly, of which 39.58% (n = 19) had a P/LP CNV finding (comprising: isolated cases, 44.44% (16/36); non-isolated cases, 25.00% (3/12)), the highest diagnostic yield among the different types of renal anomaly. Renal agenesis, which accounted for 9.92% (n = 87) of all abnormal renal cases, had a CMA diagnostic yield of 12.64% (n = 11) (comprising: isolated cases, 11.54% (9/78); non-isolated cases, 22.22% (2/9); unilateral cases, 11.39% (9/79); bilateral cases, 25.00% (2/8)), while multicystic dysplastic kidney (n = 110), renal cyst (n = 34), renal dysplasia (n = 27), crossed fused renal ectopia (n = 31), hydronephrosis (n = 98), renal duplication (n = 42) and ectopic kidney (n = 99) had overall diagnostic rates of 11.82%, 11.76%, 7.41%, 6.45%, 6.12%, 4.76% and 3.03%, respectively. Compared with the combined group of CMA-negative fetuses with any other type of renal anomaly, the rate of infant being alive and well at birth was significantly higher in CMA-negative fetuses with isolated fetal pyelectasis or ectopic kidney, whereas the rate was significantly lower in fetuses with isolated renal agenesis, multicystic dysplastic kidney or severe hydronephrosis. The most common pathogenic CNV was 17q12 deletion, which accounted for 30.14% (22/73) of all positive CMA findings, with a rate of 2.51% (22/877) among fetuses with an abnormal renal finding. Fetuses with 17q12 deletion exhibited a wide range of renal phenotypes. Other P/LP CNVs in the recurrent region that were associated with prenatal renal ultrasound abnormalities included 22q11.2, Xp21.1, Xp22.3, 2q13, 16p11.2 and 1q21, which, collectively, accounted for 2.17% (19/877) of the fetuses with prenatal renal anomalies.

CONCLUSIONS

In this retrospective review of CMA findings in a large cohort of fetuses with different types of renal ultrasound abnormality, the P/LP CNV detection rate varied significantly (3.03-39.58%) among the different types of kidney anomaly. Our data may help in the decision regarding whether to perform prenatal genetic testing in fetuses with renal ultrasound findings. Specifically, prenatal CMA testing should be performed in cases of hyperechogenic kidney, regardless of whether or not the anomaly is isolated, while it should be performed postnatally rather than prenatally in cases of fetal pyelectasis. © 2021 International Society of Ultrasound in Obstetrics and Gynecology.

Autonomous robotic laparoscopic surgery for intestinal anastomosis

Autonomous robotic surgery has the potential to provide efficacy, safety, and consistency independent of individual surgeon's skill and experience. Autonomous anastomosis is a challenging soft-tissue surgery task because it requires intricate imaging, tissue tracking, and surgical planning techniques, as well as a precise execution via highly adaptable control strategies often in unstructured and deformable environments. In the laparoscopic setting, such surgeries are even more challenging because of the need for high maneuverability and repeatability under motion and vision constraints. Here we describe an enhanced autonomous strategy for laparoscopic soft tissue surgery and demonstrate robotic laparoscopic small bowel anastomosis in phantom and in vivo intestinal tissues. This enhanced autonomous strategy allows the operator to select among autonomously generated surgical plans and the robot executes a wide range of tasks independently. We then use our enhanced autonomous strategy to perform in vivo autonomous robotic laparoscopic surgery for intestinal anastomosis on porcine models over a 1-week survival period. We compared the anastomosis quality criteria-including needle placement corrections, suture spacing, suture bite size, completion time, lumen patency, and leak pressure-of the developed autonomous system, manual laparoscopic surgery, and robot-assisted surgery (RAS). Data from a phantom model indicate that our system outperforms expert surgeons' manual technique and RAS technique in terms of consistency and accuracy. This was also replicated in the in vivo model. These results demonstrate that surgical robots exhibiting high levels of autonomy have the potential to improve consistency, patient outcomes, and access to a standard surgical technique.

The Effect of Vanadium Content Coupling with Heat Treatment Process on the Properties of Low-Vanadium Wear-Resistant Alloy

The development of wear-resistant materials with excellent properties is of great research value in the manufacturing industry. In this paper, a new kind of low-vanadium wear-resistant alloy was designed and characterized to unveil the influence of vanadium content coupling with heat treatment on the microstructure, hardness, and abrasive wear property. The performances of commercial high chromium cast iron (HCCI) and the new low-vanadium wear-resistant alloy are compared. The alloy with 3 wt.% vanadium quenched at 900 °C and tempered at 250 °C, possessing VC, Mo₂C, and M₇C₃ distributed in the martensite matrix, displayed a wear resistance two times better than the HCCI. The results showed that the increase of vanadium content from 0.98 wt.% to 3.00 wt.% resulted in a decrease in the size of M₇C₃ and a more homogeneous distribution of M₇C₃. VC with a bimodal distribution is effective for impeding grooving or indenting by abrasives because of their high hardness, which plays a vital role in improving the wear resistance of low-vanadium wear-resistant alloy.

Change of zinc mobilization and gene expression of key zinc transport proteins between the yolk sac membrane and liver of duck embryonic developing

Zinc (Zn) deposition in egg yolk is essential for the rapid growth and complete development of the avian embryo. Thus, it is crucial to obtain maximal Zn mobilization at an appropriate time during development in favor of the survival of avian embryos. The aim of this study was to study the developmental change of Zn mobilization and gene expression related to key Zn transport proteins between the yolk sac membrane and embryonic liver from the incubation d 17 (E17) to d 32 (E32) during duck embryonic developing. The weights of duck embryo, embryo without yolk sac, and embryonic liver increased as well as the yolk sac weight decreased linearly (P < 0.0001) when incubation day increased. The Zn concentration in the yolk sac did not change from E17 to E29 and only declined significantly from E29 to E32 of duck embryos, while hepatic Zn level decreased linearly as with the increased incubation time (P < 0.01). When the incubation day increased, the decreased Zn amount in the yolk sac and the increased Zn amount in the embryonic liver were observed (P < 0.0001). The calculated transfer-out rate of Zn in the yolk sac and transfer-in rate of Zn in livers were both increased from E23-26 to E29-32 (P < 0.01). Among E17, E23 and E29, the solute carrier family 39 member (ZIP) of ZIP10, ZIP13, and ZIP14 genes mRNA expressions were increased in yolk sac membrane but were decreased in the embryonic liver, while metallothionein 1 mRNA expression was increased both in the yolk sac membrane and liver (P < 0.05). In conclusion, yolk sac membrane and embryonic liver tissues displayed the similar developmental patterns of Zn mobilization and metallothionein 1 mRNA expression from E17 to E32 during duck embryonic developing. The appropriate time of the maximal rate of Zn mobilization were observed between E29 and E32 of duck embryo, associated with the significant changes of gene expression related to some key Zn transport proteins on E29 in yolk sac membrane and liver tissues.

Trial leadership by women is associated with racial diversity among heart failure clinical trial participants: a systematic bibliometric review 2000–2020

Background

For the results of randomized controlled trials (RCTs) to be generalizable, they should report on and include the broad range of patients who have the disease.

Purpose

We assessed temporal trends and trial factors associated with 1) the reporting of race or ethnicity data and 2) the enrolment of Black, Indigenous, and people of colour (BIPOC) in Heart Failure (HF) RCTs.

Methods

We searched MEDLINE, EMBASE, and CINAHL for RCTs that recruited adults with HF and were published in journals with an impact factor ≥10 between January 1, 2000 and June 17, 2020. We extracted data in duplicate and used the Cochran-Armitage and Jonchkeere-Terpstra tests to examine temporal trends. We used multivariable regression to assess the independent association between trial factors and the outcomes of interest.

Results

A total of 414 RCTs met inclusion criteria, of which a vast majority (90.6%; 95% CI 87.4–93.2%) were coordinated in either Europe or North America. Only 157 of the 414 RCTs (37.9%; 95% CI 33.2–42.8%) reported race/ethnicity data; among the 158,200 participants in these trials, only 29,512 (18.7%; 95% CI 18.5–18.9%) were BIPOC. There was a significant increase in the reporting of race or ethnicity data (from 26.9% in 2000–2001 to 54.2% in 2019–2020, p&lt;0.001) and in enrollment of BIPOC (from 16.5% in 2000–2001 to 23.9% in 2019–2020, p=0.038) between 2000–2020. Trial leadership by a woman was associated with twice the adjusted odds of reporting of race or ethnicity data (OR 2.0; 95% CI 1.1–3.8; p=0.028) and an 8.4% (95% CI 1.9–15.0%; p=0.012) adjusted increase in enrollment of BIPOC. The race/ethnicity of trial leaders was not available for analysis.

Conclusions

Among HF RCTs published between 2000–2020, &lt;38% reported data on race or ethnicity, although this increased over time. Among trials reporting such data, &lt;19% of participants were BIPOC, with modest increases in enrollment over time. Trials led by women had greater adjusted odds of reporting race/ethnicity data and enrollment of BIPOC.

Funding Acknowledgement

Type of funding sources: Public grant(s) – National budget only. Main funding source(s): CIHR

Global representation of heart failure clinical trial leaders and collaborators: a systematic bibliometric review 2000–2020

Aims

Heart Failure (HF) has a disproportionate burden in low- and middle-income countries. The geographic representation of those who lead HF randomized clinical trials (RCTs) may not reflect the geographic burden of disease. We assessed temporal trends and trial characteristics associated with leadership outside Europe and North America, and explored whether there was a geographic association between trial leadership and participant enrolment.

Methods and results

We searched MEDLINE, EMBASE, and CINAHL for HF RCTs published in journals with an impact factor ≥10 between January 1, 2000, and June 17, 2020. We used the Jonckheere-Terpstra test to assess temporal trends and multivariable logistic regression models to determine associations between predictor and outcome variables.

There were 414 eligible RCTs. Only 80 of 828 trial leaders (9.7%; 95% CI: 7.8% to 11.8%), and 453 of 4656 collaborators (9.7%; 95% CI: 8.8% to 10.6%) were from regions outside Europe and North America, with no temporal change in geographic representation. The odds of trial leadership outside Europe and North America were significantly lower with industry versus public funding (OR: 0.33; 95% CI: 0.15 to 0.75; P=0.008). Trial leadership outside Europe and North America was associated with enrolment of patients outside Europe and North America (OR: 10.0; 95% CI 5.6–19.0; P&lt;0.001).

Conclusion

Trial leadership outside Europe and North America is rare, particularly in industry funded trials, and is associated with participant enrolment in regions with disproportionate disease burden. Building research capacity and networks in under-represented regions could increase generalizability of trial results.

Funding Acknowledgement

Type of funding sources: None.

Studies on Kinetics, Isotherms, Thermodynamics and Adsorption Mechanism of Methylene Blue by N and S Co-Doped Porous Carbon Spheres

Heteroatom-doped carbon is widely used in the fields of adsorbents, electrode materials and catalysts due to its excellent physicochemical properties. N and S co-doped porous carbon spheres (N,S-PCSs) were synthesized using glucose and L-cysteine as carbon and heteroatom sources using a combined hydrothermal and KOH activation process. The physicochemical structures and single-factor methylene blue (MB) adsorption properties of the N,S-PCSs were then studied. The optimized N,S-PCSs-1 possessed a perfect spherical morphology with a 2-8-μm diameter and a large specific area of 1769.41 m2 g-1, in which the N and S contents were 2.97 at% and 0.88 at%, respectively. In the single-factor adsorption experiment for MB, the MB adsorption rate increased with an increase in carbon dosage and MB initial concentration, and the adsorption reached equilibrium within 2-3 h. The pseudo-second-order kinetic model could excellently fit the experimental data with a high R2 (0.9999). The Langmuir isothermal adsorption equation fitted well with the experimental results with an R2 value of 0.9618, and the MB maximum adsorption quantity was 909.10 mg g-1. The adsorption of MB by N,S-PCSs-1 was a spontaneous, endothermic, and random process based on the thermodynamics analyses. The adsorption mechanism mainly involved Van der Waals force adsorption, π-π stacking, hydrogen bonds and Lewis acid-base interactions.

Triplex qRT-PCR with specific probe for synchronously detecting Bovine parvovirus, bovine coronavirus, bovine parainfluenza virus and its applications

Bovine parvovirus (BPV), bovine coronavirus (BCoV) and bovine parainfluenza virus (BPIV) are common etiologies causing gastrointestinal and respiratory diseases in dairy herds. However, there are few reports on the synchronous detection of BPV, BCoV and BPIV. The present article aimed to develop a quick and accurate RT-PCR assay to synchronously detect BPV, BCoV and BPIV based on their specific probes. One pair universal primers, one pair specific primers and one specific probe was designed and synthesized. After the concentrations of primer and probe and annealing temperature were strictly optimized, the specificity, sensitivity and repeatability of the established triplex probe qRT-PCR were evaluated, respectively. The results showed the recombinant plasmids of pMD18-T-BPV, pMD18-T-BCoV and pMD18-T-BPIV were 554bp, 699bp and 704bp, respectively. The optimal annealing temperature was set at 45.0°C for triplex qRT-PCR. The triplex probe qRT-PCR can only synchronously detect BPV, BCoV and BPIV. Detection sensitivities were 2.0×102, 2.0×102 and 2.0×101 copies/μL for BPV, BCoV and BPIV, being 1000-fold greater than that in the conventional PCR. Detection of clinical samples demonstrated that triplex probe qRT-PCR had a higher sensitivity and specificity. The intra-assay and inter-assay coefficient of variation were lower than 2.0%. Clinical specimens verified that the triplex qRT-PCR had a higher sensitivity and specificity than universal PCR. In conclusion, this triplex probe qRT-PCR could detect only BPV, BCoV and BPIV. Minimum detection limits were 2.0×102 copies/μL for BPV and BCoV, and 2.0×101 copies/μL for BPIV. The sensitivity of this triplex probe qRT-PCR was 1000-fold greater than that in the conventional PCR. The newly qRT-PCR could be used to monitor or differentially diagnose virus infection.

Primary Clear Cell Sarcoma of the Breast: A Case Report

Casestudy: Clear cell sarcoma (CCS), also known as malignant melanoma of soft parts, is a primary soft tissue neoplasm exhibiting evidence of melanocytic differentiation. It is an uncommon aggressive tumor that arises in tendons and aponeuroses of the distal extremities. Here, we report the first case of primary CCS of the breast.

The patient was a 43-year-old female who presented with a left breast mass and underwent surgical resection at an outside hospital. No history of melanoma or any other malignancies was reported. Grossly, it was described as a 2 x 1.5 x 1.5 cm, well-demarcated, white nodular mass. Microscopic examination showed a malignant neoplasm composed of short spindle cells with ill-defined, eosinophilic cytoplasm and ovoid nuclei with finely stippled chromatin and exhibiting moderate pleomorphism. The lesional cells were arranged in short interlacing fascicles with abundant collagen, with brisk mitotic activity (&gt;15/10 HPF). The differential diagnosis included spindle cell carcinoma, myoepithelial carcinoma and melanocytic neoplasm. The tumor cells were immunoreactive for S-100 protein, SOX10, Mart-1, HMB45 and MiTF, but negative for multiple cytokeratins (including high and low molecular weight keratins), p63, EMA, CEA, Caldesmon, smooth muscle myosin, calponin, desmin, ERG, and CD31, thus confirming melanocytic origin. EWSR1 gene rearrangement was detected by fluorescence in situ hybridization analysis using break-apart probes. Overall, the histomorphology combined with the immunophenotype and cytogenetic characteristics, was most consistent with a CCS. To our knowledge, no primary CCS of the breast has been previously reported in the English language literature.

Effects of CeO2 on the Si Precipitation Mechanism of SiCp/Al-Si Composite Prepared by Powder Metallurgy

SiCp/Al-Si composites with different CeO₂ contents were prepared by a powder metallurgy method. The effect of CeO₂ content on the microstructure of the composites was studied. The mechanism of CeO₂ on the precipitation of Si during sintering was analyzed by theoretical calculations. The results show that the appropriate amount of CeO₂ can significantly refine the size of precipitated Si particles in the composite and increase the number of Si particles. With the increase of CeO₂ content from 0 to 0.6 wt%, the number of Si particles precipitated in the composites increases gradually, and the average particle size of Si particles decreases gradually. When the CeO₂ content is 0.6 wt%, the number of Si particles precipitated in the composites reaches the maximum, and the average particle size reaches the minimum. However, with the increase of CeO₂ content from 0.6 wt% to 1.8 wt%, the number of Si particles precipitated in the composites began to decrease, and the average size of Si particles gradually increased. CeO₂ can be used as heterogeneous nucleation substrate of precipitated Si, and the nucleation rate of precipitated Si on a CeO₂ substrate is higher than that on an aluminum substrate. The proper addition of CeO₂ can improve the nucleation efficiency of precipitated Si, thus increasing the amount and refining the size of precipitated Si.

miR-34b inhibits the migration/invasion and promotes apoptosis of non-small-cell lung cancer cells by YAF2

OBJECTIVE

Lung cancer is the leading cause of cancer death in the world and microRNAs (miRNA) have been found to be involved in the initiation and development of cancer by acting as potential oncogenes or tumor suppressor genes.

PATIENTS AND METHODS

In this study, we investigated the expression of miR-34b in non-small cell lung cancer (NSCLC) patients and discussed the molecular mechanism of miR-34b in the invasion and migration of A549 cells in vitro.

RESULTS

Our results showed that miR-34b was significantly down-regulated in primary cancer tissues when compared with the normal lung tissues. The over-expression of miR-34b inhibited migration and invasion, and promoted apoptosis of A549 lung cancer cells. Furthermore, Luciferase reporter assay validated YY1-associated factor 2 (YAF2) as a direct target of miR-34b and YAF2 expression was significantly increased in clinical NSCLC tissue samples. In addition, the over-expression of miR-34b inhibited YAF2, p-Jak2, p-STAT3 and MMP2 protein expression and promoted caspase 3 protein expression in cancer cells.

CONCLUSIONS

Our results suggest that miR-34b may inhibit migration and invasion of NSCLC cells by targeting YAF2. Thus, our findings provide new insight into the molecular mechanisms of lung cancer metastasis and miR-34b may serve as a potential target in the treatment of human lung cancer.

miR-18a expression in basal cell carcinoma and regulatory mechanism on autophagy through mTOR pathway

BACKGROUND

Basal cell carcinoma (BCC) is the most common form of skin carcinoma.

AIM

To investigate the function of key micro(mi)RNAs and to explore the potential molecular mechanisms involved in BCC.

METHODS

The microarray dataset GSE34535, which comprises seven BCC samples and seven control samples, was downloaded from the Gene Expression Omnibus database. Differentially expressed miRNAs (DE-miRNAs) were identified. We collected tissue samples from 20 patients with BCC and 20 healthy controls (HCs), to compare the miR-18a expression in their tissue samples. Expression of miR-18a in A431 and HaCaT cells was also assayed. Following this, we upregulated and downregulated miR-18a expression in A431 cells to examine the effects on cell proliferation, migration and apoptosis. To further investigate the relative mechanism, the proteins LC3, Beclin 1, Akt and mammalian target of rapamycin (mTOR) were examined by quantitative real-time PCR and Western blotting. For further verification, we examined the expression of LC3 in the 20 BCC and 20 HC tissue samples.

RESULTS

In total, 19 DE-miRNAs (13 upregulated and 6 downregulated) that were common to the BCC and HC groups were identified. Levels of miR-18a were about three-fold higher in BCC tissues and A431 cells compared with their respective control groups. In vitro, downregulation of miR-18a was shown to inhibit cell proliferation and activate autophagy via the Akt/mTOR signalling pathway, while upregulation of miR-18a promoted proliferation of these cells. LC3 was decreased in BCC compared with HC tissue samples.

CONCLUSIONS

Our data support an oncogenic role of miR-18a through a novel Akt/mTOR/Beclin 1/LC3 axis, and suggest that the antitumour effects of miR-18a inhibitor may make it suitable for BCC therapy.

[Analysis of emergency venous sinus stenting in the treatment of acute visual impairment caused by idiopathic cranial hypertension]

Objective: To investigate the efficacy and safety of emergency venous sinus stenting in the treatment of acute visual impairment caused by idiopathic intracranial hypertension (IIH). Methods: A descriptive cross-sectional study design was used to retrospectively analyze 38 patients undergoing venous sinus stenting in the First Affiliated Hospital of Zhengzhou University from January 2013 to October 2019. A total of 9 patients who had sudden short-term vision loss met the inclusion criteria. Routine visual field and fundus examination were performed. The venous sinus stenosis (CVSS) was confirmed by MR venography or DSA. The pressure gradient at both ends of CVSS was ≥10 mmHg(1 mmHg=0.133 kPa). All patients were treated with emergency venous sinus stenting. Six-month follow-up data were collected for comparison, evaluation of the therapeutic effect, and observation of adverse reactions. Results: All 9 patients were successfully treated with venous sinus stent. The pressure gradient at the distal and proximal ends of the stenosis after stent implantation decreased to (2.3±1.2) mmHg. After 6 months of follow-up, the papilledema was significantly improved or disappeared in all patients. The average grade of papilledema decreased from 2.44±0.73 before operation to 0.56±0.53 after treatment (t=6.314, P<0.001). The visual acuity of 9 patients recovered to the pre-onset level or improved significantly after 6 months. The average baseline value of preoperative visual acuity (logMAR) was 0.12±0.11, which increased to 0.74±0.13 on average 6 months after operation (t=-10.827, P<0.001). No recurrence of symptoms or serious adverse reactions occurred in all patients during the follow-up period. Conclusion: For patients with acute visual impairment caused by idiopathic cranial hypertension, emergency venous sinus stenting is a relatively safe and effective treatment that can effectively improve visual acuity.

Antimalarial agent artesunate induces G0/G1 cell cycle arrest and apoptosis via increasing intracellular ROS levels in normal liver cells

Artesunate (ARS) has been shown to be highly effective against chloroquine-resistant malaria. In vitro studies reported that ARS has anticancer effects; however, its detrimental action on cancer cells may also play a role in its toxicity toward normal cells and its potential toxicity has not been sufficiently researched. In this study, we investigated the possible cytotoxic effects using normal BRL-3A and AML12 liver cells. The results showed that ARS dose-dependently inhibited cell proliferation and arrested the G0/G1 phase cell cycle in both BRL-3A and AML12 liver cells. Western blotting demonstrated that ARS induced a significant downregulation of cyclin-dependent kinase-2 (CDK2), CDK4, cyclin D1, and cyclin E1 in various levels and then caused apoptosis when the Bcl-2/Bax ratio decreased. Conversely, the levels of intracellular reactive oxygen species (ROS) were increased. The ROS scavenger N-acetylcysteine can significantly inhibit cell cycle arrest and apoptosis induced by ARS. Thus, the data confirmed that ARS exposure impairs normal liver cell proliferation by inducing G0/G1 cell cycle arrest and apoptosis, and this detrimental action may be associated with intracellular ROS accumulation. Collectively, the possible side effects of ARS on healthy normal cells cannot be neglected when developing therapies.

0834 Different Neural Circuits Were Associated With Different Parts of Relationships Among Sleep, Pain and Anxiety in Women with Primary Dysmenorrhoea

Introduction

Although the relationships amongst sleep, pain and anxiety have been evidenced, the underlying neurological mechanisms remain elusive. Primary dysmenorrhea is a good model of spontaneous pain with clear painful (menstruation, state) and pain free (e.g., peri-ovulatory phase, trait) conditions. We sought to investigate the state- and trait-related neural signatures that link sleep and anxiety in primary dysmenorrhea.

Methods

Thirty female subjects with primary dysmenorrhea and 30 healthy female controls completed resting-state functional magnetic resonance imaging, the State-Trait Anxiety Inventory and sleep quality assessments during menstruation and peri-ovulatory phases. As we have reported that there was altered default mode network in the primary dysmenorrhea, posterior parietal cortex (PPC) was therefore chosen as the seed to elucidate the functional connectivity that may correlate with sleep and anxiety.

Results

The primary dysmenorrheic subjects exhibited sleep disturbances throughout the menstrual cycle with increased state anxiety. The primary dysmenorrheic subjects demonstrated significantly higher correlations between the sleep quality and the PPC-insula and -putamen functional connectivity during the peri-ovulatory phase. During menstruation, the primary dysmenorrheic subjects demonstrated significantly lower correlations between their state-anxiety scores and the PPC-occipital cortex functional connectivity.

Conclusion

After regressing out the effects of trait anxiety, the correlation between sleep quality and the PPC-putamen functional connectivity was not significant, indicating anxiety-mediated sleep-pain relationship. The PPC-insula functional connectivity, by contrast, was remained significant. Furthermore, state anxiety was associated with the PPC-occipital cortex functional connectivity that was significantly impaired in primary dysmenorrheic subjects. These findings hinted pain and anxiety mediating sleep quality in different neurological circuits.

Support

Taipei City Goverment(10401-62-046 and 10501-62-046)

Lead-Free Perovskite Narrow-Bandgap Oxide Semiconductors of Rare-Earth Manganates

Tremendous success has been achieved in photovoltaic (PV) applications, but PV-generated electricity still cannot compete with traditional power in terms of price. Chemically stable and nontoxic all-oxide solar cells made from earth-abundant resources fulfill the requirements for low-cost manufacturing under ambient conditions and thus are promising as the next-generation approach to solar cells. However, the main obstacles to developing all-oxide solar cells are the spectral absorbers. Besides photovoltaics, novel chemically stable, nontoxic, and earth-abundant narrow-bandgap semiconductors are desired for photochemical applications in photodetectors, photoelectrodes, or photocatalysts. Herein, were report novel lead-free perovskite narrow-bandgap rare-earth semiconductors, YMnO3, HoMnO3, ErMnO3, and YbMnO3, which were identified by screening a family of perovskite rare-earth manganates, RMnO3 (R = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, and Yb). The sharp edge observed in their absorption spectra indicates the existence of band gaps, further confirmed with laser Raman fluorescence spectra. Good periodic on-off photoelectronic response was observed in 8 of the 12 members (i.e., R = La, Pr, Nd, Sm, Gd, Tb, Dy, and Yb). Among them, YbMnO3 is approved as an n-type semiconductor with a direct band gap near 1.35 eV, whose theoretical Shockley-Queisser efficiency is approximately 33.7% for single-p-n-junction solar cells. This work sheds light on exploring stable oxide semiconductors with a narrow band gap for future applications.

Hatted 1T/2H-Phase MoS2 on Ni3 S2 Nanorods for Efficient Overall Water Splitting in Alkaline Media

A new hatted 1T/2H-phase MoS₂ on Ni₃ S₂ nanorods, as a bifunctional electrocatalyst for overall water splitting in alkaline media, is prepared through a simple one-pot hydrothermal synthesis. The hat-rod structure is composed mainly of Ni₃ S₂ , with 1T/2H-MoS₂ adhered to the top of the growth. Aqueous ammonia plays an important role in forming the 1T-phase MoS₂ by twisting the 2H-phase transition and expanding the interlayer spacing through the intercalation of NH₃ /NH₄ ⁺ . Owing to the special "hat-like" structure, the electrons conduct easily from Ni foam along Ni₃ S₂ to MoS₂ , and the catalyst particles maintain sufficient contact with the electrolyte, with gaseous molecules produced by water splitting easily removed from the surface of the catalyst. Thus, the electrocatalytic performance is enhanced, with an overpotential of 73 mV, a Tafel slope of 79 mV dec^-1 , and excellent stability, and the OER demonstrates an overpotential of 190 mV and Tafel slope of 166 mV dec^-1 .