Concomitant Paratubal Cyst and Isolated Fallopian Tube Torsion Masquerading as Acute Appendicitis in a Pregnant Female

Abdominal pain in pregnant individuals presents diagnostic challenges, especially when appendicitis is suspected. We report a rare case of a 26-year-old pregnant female with recurrent right lower quadrant (RLQ) abdominal pain initially misdiagnosed as a urinary tract infection. Diagnostic uncertainty led to a magnetic resonance imaging (MRI) scan, which revealed a right adnexal cystic structure and a thickened tubular structure adjacent to the cecal pole, raising concerns of complicated appendicitis. Subsequent diagnostic laparoscopy revealed a right-sided fallopian tube paratubal cyst with 360-degree torsion and associated fallopian tube torsion without the involvement of the ovary. The cyst was successfully excised, and the patient subsequently delivered a healthy baby via emergency lower section caesarean section. Abdominal pain during pregnancy has various causes. Diagnosing appendicitis during pregnancy is challenging due to anatomical and physiological changes. Ultrasound (US) is commonly used but has limited accuracy. Computed tomography (CT) is avoided due to radiation risks, while MRI is increasingly used and shows high diagnostic accuracy or aids in alternative diagnoses. Regardless of the diagnosis, the prompt recognition of intraabdominal pathology is crucial to prevent fetal morbidity. This case highlights the challenges in the accurate diagnosis of abdominal pain during pregnancy and emphasizes the importance of considering alternative pathologies to prevent delays in treatment and complications. Clinicians should consider diagnostic laparoscopy for pregnant patients with equivocal investigations and lower abdominal pain. The differential diagnosis may include both common and rare causes such as concomitant paratubal cyst and isolated fallopian tube torsion (IFTT), emphasizing a high index of suspicion and collaboration with obstetric colleagues to ensure optimal care.

Cohort study of 1241 patients to identify predictors of negative appendicectomy

BACKGROUND

Acute Appendicitis is the most common surgical presentation within Australia. Despite the increasing use of radiological investigations to aid clinical diagnosis, many appendectomies result in a histologically normal appendix. This study examines the histological negative appendicectomy rate (NAR) in a metropolitan hospital and determine factors associated with a negative appendicectomy (NA).

METHODS

Patients who underwent emergency appendicectomy for suspected acute appendicitis at Logan Hospital, Australia, between February 2016 and March 2019 inclusive were included. Clinicopathologic and imaging variables were analysed for associations with NA.

RESULTS

A total of 1241 patients underwent emergency appendicectomy of which 121 patients (9.8%) had a NA. The NAR for clinical diagnosis alone (no imaging) was 9.9%, 14.5% for ultrasonography alone and computed tomography scan alone was 4.9%. Univariate analysis revealed age <27 years (P < 0.001), absence of hypertension (P = 0.008), symptoms >48 hours (P < 0.001), absence of leucocytosis (P < 0.001), undergoing ultrasonography only (P < 0.001), undergoing computed tomography scan only (P < 0.001), macroscopically normal appendix (P < 0.001) and time to operation >24 hours (P < 0.001) were associated with NA. Multivariate analysis identified symptoms >48 h at presentation (odds ratio (OR) 1.98, 95% confidence interval (CI) 1.20-3.24; P = 0.007), absence of leucocytosis (OR 2.41, 95% CI 1.52-3.81; P < 0.001) and macroscopically normal appendix (OR 5.70, 95% CI 3.49-9.33; P < 0.001) to be associated with a NA.

CONCLUSION

The NAR reported is lowest in an Australian institution. The identified predictors of NA will be useful in identifying patients who would truly benefit from an appendicectomy versus those would have a higher rate of NA who may be suitable to be treated non-operatively to be spared the unnecessary morbidity of surgery.

Third-order implementation and convergence of the strong-property-fluctuation theory in electromagnetic homogenization

The strong-property-fluctuation theory (SPFT) has been widely applied under the second-order approximation (also known as the bilocal approximation) to estimate the constitutive properties of effectively homogeneous composite mediums. A third-order mass operator approximation is developed here. The convergence of the long-wavelength, bilocally-approximated SPFT is demonstrated for isotropic chiral composite mediums, as well as for chiroferrite composite mediums.

Strong-property-fluctuation theory for homogenization of bianisotropic composites: formulation

The strong-property-fluctuation theory is developed for the homogenization of the linear dielectric, magnetic, and magnetoelectric properties of a two-constituent bianisotropic composite. The notion of a bianisotropic comparison medium (BCM) is introduced to serve as a springboard for the Dyson equation satisfied by the ensemble-averaged electromagnetic field. With the constitutive properties of the BCM serving as the zeroth-order solution of the Dyson equation, the first-order correction, known as the bilocal approximation, is obtained. Wave propagation in the composite can be described in this manner by a nonlocal effective medium containing information about the spatial correlations of the constitutive properties. For scales larger than the correlation length, the nonlocality vanishes and a local effective medium emerges. Analytical results for the local effective constitutive properties are presented after assuming a spherical particulate topology for the constituent mediums. Illustrative numerical results are provided.

Evaluation of four blood pump geometries: the optical tracer technique

Artificial blood pump assistance of the failing human heart can allow it to recover. Analysis of blood pump fluid flow is a useful tool for design development and thrombosis minimization. The aim of this study was to investigate fluid flow, particularly ventricular clearance rate and stagnation areas, in four different blood pump geometries and to determine the best design. The blood pumps consisted of a polyurethane ventricle, and combinations of inlet/outlet pipe angles and compression plate shapes. A video camera recorded the motion of fluid labelled with an optical tracer (Methyl Blue histological dye). A novel processing method was developed to produce colour maps of tracer concentration, experimentally calibrated. An overall picture of fluid flow in each pump geometry was generated by considering clearance curves, tracer concentration maps and inflow jet animations. Overall and local mixing coefficients are calculated for each pump. The best geometry featured straight inlet/outlet pipes and a domed compression plate. This optical tracer technique has proven convenient, economical, sensitive to low concentrations of tracer and provides instantaneous pictures of tracer distribution in a ventricle.

Evaluation of four blood pump geometries: fluorescent particle flow visualisation technique

Artificial blood pumps play an increasingly important role in the treatment of end-stage cardiac failure. The fluid dynamics of blood flow through such devices crucially affects their clinical effectiveness. Specifically, if the flow of blood stagnates or slowly re-circulates thrombus formation can occur and the avoidance of such flow features is a primary consideration in the design of pumps. The present study concerns the development of a fluorescent particle visualisation technique and its application to investigate the flow environments in four prototype blood pump designs. The procedure involves recording video images of eight illuminated cross sections through the pumping chambers as the pumps operate in a mock circulatory loop using a test fluid seeded with fluorescent particles. The technique enabled a semi-quantitative characterisation of the entire flow field, throughout the pumping cycle, to be performed for each pump design. Flow features were then related to design properties of the individual pumps and recommendations made for design optimisation.

Laser profiling of bovine pericardial heart valves

Laser profiling techniques have been used to examine the 2-dimensional and 3-dimensional patterns of leaflet motion in functioning bovine pericardial heart valves (1 normal valve and 1 fatigued/calcified). In the normal valve the general patterns of opening and closing were similar for all leaflets; however, localised variations such as areas of high curvature, retarded motion and high speed motion were identified. In the fatigued/calcified valve significant differences from the normal leaflet motion were observed e.g. increased crimping, gross leaflet lag and irregular deformation. The laser profiling technique was able to reveal changes in the functional dynamics of pericardial valve leaflets not otherwise detectable by conventional hydrodynamic measurements of valve performance.

Correlation of radionuclide and optical tracer assessments of fluid flow in artificial ventricles

Characterization of flow properties of an artificial ventricle may aid development of designs to minimize thrombosis. Techniques for determining two such flow properties, viz. ventricular clearance rate and ejection fraction, are compared and validated here for polyurethane and silicone rubber ventricles operated in a mock circulatory loop at various stroke volumes and pulse rates. Ventricular clearance rats were measured both by clinical radionuclide tracer techniques and by an optical tracer method. Ejection fractions were measured by radionuclide imaging and validated by direct measurements of flow rate and ventricular volume. Results from the two methods for ventricular clearance are in close agreement. The optical tracer method is superior in spatial resolution, convenience and economy, but the radionuclide tracer method for ejection fraction gives excellent agreement with the absolute measurements.

Polyurethane heart valve durability: effects of leaflet thickness and material

A flexible trileaflet polyurethane valve has been made by dip-moulding leaflets directly onto an injection-moulded frame. The durability of this value is, in part, determined by the thickness of its leaflets. Leaflet thickness is also a major determinant of hydrodynamic function. This study examines valves (n = 31) with leaflets made of a polyetherurethane (PEU, n = 22) or a polyetherurethaneurea (PEUE, n = 9), of varying thickness distributions. The valves were subjected to accelerated fatigue test at 37 degrees C and failure monitored. Leaflet thicknesses ranged from 60 to 200 microns. PEU leaflet thickness bore no relationship to durability, which was less than 400 million cycles. PEUE valves, in contrast, exceeded 800 million cycles. Durability in PEUE valves was directly related to leaflet thickness (r = 0.93, p < 0.001), with good durability achieved with median leaflet thicknesses of approximately 150 microns. Thus polyurethane valves can be made with good hydrodynamic properties and with sufficient durability to consider potential clinical use.

Polyurethane heart valves: fatigue failure, calcification, and polyurethane structure

Six flexible-leaflet prosthetic heart valves, fabricated from a polyetherurethaneurea (PEUE), underwent long-term fatigue and calcification testing. Three valves exceeded 800 million cycles without failure. Three valves failed at 775, 460, and 544 million cycles, respectively. Calcification was observed with and without associated failure in regions of high strain. Comparison with similar valves fabricated from a polyetherurethane (PEU) suggests that the PEU is likely to fail sooner as a valve leaflet. Localized calcification developed in PEUE leaflets at the primary failure site of PEU leaflets, close to the coaptation region of the three leaflets. The failure mode in PEU valves had the appearance of abrasion wear associated with calcification. High strains in the same area may render the PEUE leaflets vulnerable to calcification. Intrinsic calcification of this type, however, is a long-term phenomenon unlikely to cause early valve failure. Both polymers performed similarly during static in vitro and in vivo calcification testing and demonstrated a much lesser degree of calcification than bioprosthetic types of valve materials. Polyurethane valves can achieve the durabilities required of an implantable prosthetic valve, equaling the fatigue life of currently available bioprosthetic valves.

New polyurethane heart valve prosthesis: design, manufacture and evaluation

In light of the thrombogenicity of mechanical valves and the limited durability of bioprosthetic valves, alternative designs and materials are being considered for prosthetic heart valves. A new tri-leaflet valve, made entirely from polyurethane, has been developed. The valve comprises three thin polyurethane leaflets (approximately 100 microns thick) suspended from the inside of a flexible polyurethane frame. The closed leaflet geometry is elliptical in the radial direction and hyperbolic in the circumferential direction. Valve leaflets are formed and integrated with their support frame in a single dip coating operation. The dipping process consistently gives rise to tolerably uniform leaflet thickness distributions. In hydrodynamic tests, the polyurethane valve exhibits pressure gradients similar to those for a bioprosthetic valve (St Jude Bioimplant), and levels of regurgitation and leakage are considerably less than those for either a bi-leaflet mechanical valve (St Jude Medical) or the bioprosthetic valve. Six out of six consecutively manufactured polyurethane valves have exceeded the equivalent of 10 years function without failure in accelerated fatigue tests. The only failure to date occurred after the equivalent of approximately 12 years cycling, and three valves have reached 527 million cycles (approximately 13 years equivalent). The simplicity of valve manufacture, combined with promising results from in vitro testing, indicate that further evaluation is warranted.

In vitro function and durability of a polyurethane heart valve: material considerations

BACKGROUND AND AIMS OF THE STUDY

Flexible trileaflet polyurethane heart valves can be designed which have good hydrodynamic function in vitro. The choice of polyurethane for fabrication of such valves is not simple; several similar polyurethanes are available, but relatively minor differences in their structure and composition may have profound effects on long term fatigue behavior with little effect on their short term mechanical properties.

METHODS

The relative functional characteristics of flexible trileaflet polyurethane valves made from two different polyetherurethanes were compared before and after long term fatigue testing. The polyetherurethanes had similar gross mechanical properties, differing in that one was chain-extended with butanediol (PEU) and the other with ethylene diamine (PEUE). Six valves of each type, with similar leaflet thickness distributions, were studied.

RESULTS

Hydrodynamic function of both valve types was similar to a similarly sized porcine aortic valve. Mean pressure drop across the open valve was higher in PEU valves than in PEUE valves, although PEUE valves had greater energy losses during closure and when closed. Reverse flow decreased with time in the fatigue tester. In long term fatigue tests, all six PEU valves failed by 307 million cycles, with failure primarily by development of holes at the coaptation region of the leaflets associated with localized calcification. Three PEUE valves exceeded 800 million cycles without failure and all PEUE valves exceeded 450 million cycles.

CONCLUSIONS

A combination of good phase separation of polyurethane soft and hard segments with good rubbery characteristics can explain the better results achieved in the PEUE valves compared with similar PEU valves. These results suggest the general type of polyurethane structure suitable for heart valve fabrication and have implications for development of novel polyurethanes for this application.

In vitro function and durability assessment of a novel polyurethane heart valve prosthesis

While flexible-leaflet, central-flow prosthetic heart valves promise relief from anticoagulation therapy, they continue to be restricted by inadequate durability. In consequence, a novel trileaflet valve, made entirely from polyurethane, has been developed. A batch of 6 consecutively manufactured polyurethane valves was subjected to hydrodynamic function and accelerated fatigue testing. Computerized data acquisition and control systems have been introduced to improve valve testing methodologies. In terms of hydrodynamic function, the polyurethane valve demonstrates transvalvular pressure gradients similar to those for a bioprosthetic valve (Carpentier-Edwards) and levels of retrograde flow significantly less than those for either the bioprosthetic valve or a bileaflet mechanical valve (St Jude Medical). The equivalent of 10 years of cycling without failure has been exceeded by all 6 polyurethane valves in accelerated fatigue tests with 2 valves remaining intact after 674 million cycles (equivalent to approximately 17 years) in continuing tests. Highspeed photography revealed considerable differences in leaflet motion between valves cycled at accelerated and physiological rates.

Clinical relevance of intracranial microembolic signals in patients with left ventricular assist devices. A prospective study

BACKGROUND AND PURPOSE

The use of left ventricular assist devices has become an established method in bridging patients with end-stage cardiac failure to heart transplantation. Since thromboembolism is one of the major complications, we undertook this study to evaluate the clinical significance of Doppler microembolic signals (MES) in patients with left ventricular assist devices.

METHODS

Six patients with left ventricular assist devices were monitored for MES with transcranial Doppler ultrasonography during the first 30 postoperative days. Additionally, repeated (10 per day and patient) and prolonged (3 hours per patient) monitorings were performed to assess the adequacy of the 30-minute recordings. Three observers evaluated 30 randomly assigned monitorings in a blinded fashion to assess the interobserver variability. The relation between MES counts and clinical, radiological, hemostaseological, and pump flow parameters and the predictive value of MES counts regarding the occurrence of embolic events was evaluated.

RESULTS

Ten ischemic cerebrovascular accidents and 2 peripheral thromboembolic events occurred during the observation period of 177 days (total incidence, 6.8%). MES were found in 143 of 170 monitorings (84.1%). Their counts were significantly higher on days with clinically manifest embolic events as compared with event-free days (18.5 [3-74] versus 4 [0-52], respectively, median and 95% CI; P < .001, Mann-Whitney). The predictive value of MES counts above 7 per 30 minutes was high (75%). Significant differences in the incidence and counts of MES as well as in the incidence of clinically manifest embolic events were noted among the six patients (all P < .01) without equal differences in anticoagulant treatment or pump flow. Interobserver agreement was high (p = .78 to .89, unpaired Student's t test). Considerable short- and long-term intrapatient variations of MES counts, without consistent pattern, were noted.

CONCLUSIONS

Serial monitoring for MES is prognostically superior to single monitorings in patients with left ventricular assist devices. In the future, this new application mode may individually guide anticoagulation strategies and even influence the decision regarding early cardiac transplantation versus long-term use of the assist devices.

Transcranial Doppler detection of microemboli in prosthetic heart valve patients: dependency upon valve type

Transcranial Doppler ultrasound has revealed the existence of cerebrovascular microemboli in asymptomatic patients with prosthetic heart valves. We investigated the relation between the presence and number of emboli signals and valve type. Patients with six types of prosthetic valves (Björk-Shiley monostrut, Medtronic-Hall, Carbomedics, ATS, Carpentier-Edwards standard, Carpentier-Edwards supraannular) were examined using transcranial Doppler ultrasound in two centers. The monitoring time was 30 min over the right middle cerebral artery. All patients were stabilized on warfarin at the time of study. Microemboli signals were identified by their characteristic audiovisual signal and on subsequent spectral analysis, based on accepted criteria. A standard neurologic questionnaire was completed by all patients. The prevalence of microemboli signals varied between 49% (Medtronic Hall) and 97% (Björk-Shiley monostrut), while their number varied between 1 [0-3] (Carpentier-Edwards standard) and 187 [136-240] (Björk-Shiley monostrut) per hour (median and 95% CI). Both parameters were significantly higher in patients with Björk-Shiley monostrut valves compared to the other patient groups. There were no significant differences in the prevalence of neurologic complications among the groups examined (overall 16%), or in emboli numbers between symptomatic and asymptomatic patients. The prevalence and quantity of microemboli signals in patients with prosthetic heart valves, as detected by transcranial Doppler, is dependent upon valve type. The clinical significance of these microemboli signals remains to be further evaluated.

On the origin of cerebrovascular microemboli associated with prosthetic heart valves

Application of transcranial Doppler ultrasonography to asymptomatic prosthetic heart valve patients can result in the detection of transient high intensity signals, similar to those induced by the passage of emboli. However, the origin of these signals is unknown. An in vitro study has been undertaken to investigate the capacity of prosthetic heart valves to generate high intensity Doppler signals in the absence of blood. A pulse duplicator, filled with a seeded saline solution, was used to function prosthetic heart valves under mock-physiological conditions. A Björk-Shiley Monostrut valve was mounted in the aortic port while a tri-leaflet control valve was fixed in the mitral port. At stations upstream and downstream from the Björk-Shiley valve, flow was monitored using pulsed wave Doppler ultrasound (Nicolet TC-2000, 2 MHz probe). The effect of damping the harsh closure of the mechanical valve was investigated by applying a thin layer of soft adhesive tape between the valve occluder and outer ring. For all valve configurations, transient high intensity Doppler signals, characteristic of microemboli and similar to those observed in clinical studies of prosthetic heart valve patients, were detected downstream from the aortic port. The number of microemboli signals did not change significantly between sites at 20 cm and 40 cm downstream from the aortic valve. Damping the Björk-Shiley valve closure greatly reduced (by 80%) the number of microemboli signals detected. It is concluded that Doppler microemboli signals can be generated by prosthetic heart valves while functioning in the absence of the formed elements of blood, and that the number of microemboli signals produced depends upon the rate of energy dissipation at valve closure.

Laser profiling: a technique for the study of prosthetic heart valve leaflet motion

A detailed understanding of the stresses and strains developed in functioning flexible-leaflet valves is necessary if a durable, non-thrombogenic heart valve replacement is to be realized. A new experimental tool, laser profiling, is presented for the study of flexible-leaflet heart valve dynamics. Profiles of moving leaflet surfaces are obtained by projecting parallel sheets of laser light onto valve leaflets as the valves open and close in a mock circulatory loop. Two versions of laser profiling have been developed. In two-dimensional mode multiple profiles are generated on a fixed plane in space but at discrete intervals in time, whereas in three-dimensional mode multiple profiles are generated across the leaflet surface at (effectively) a single instant in time. Highlighted leaflet profiles are captured by camera and transferred to an image processing system for analysis. A simple algorithm permits digitized profiles to be reconstructed within a computer-aided design software package, providing detailed visualization and quantification of valve motion. Extensive validation studies have been performed using the Medtronic-Hall mechanical prosthetic heart valve. Laser profiling enables computer reconstruction of the rigid occluder to an accuracy of +/- 200 microns from a 0.7 ms exposure taken during the period at which the occluder moves with greatest velocity. The technique has been applied to investigate the leaflet dynamics of a bovine pericardial heart valve prosthesis.

Transcranial Doppler ultrasound signals associated with prosthetic heart valves: an in vitro study

The application of transcranial Doppler (TCD) ultrasonography to asymptomatic prosthetic heart valve patients can result in detection of localized bursts of high intensity signals, similar to those caused by the passage of emboli. The origin of these signals is not known. In order to investigate this phenomenon in a simplified, more controllable environment, a TCD machine was used to record flow downstream from mechanical prosthetic heart valves in a mock circulatory loop. The model, which uses a saline solution seeded with silk particles (< 15 micrometers) as the circulatory fluid, recreates the principal hydrodynamic characteristics of the left heart and systemic circulation. Reproducibility of the system was established through repeated testing of a Monostrut valve. Three different mechanical valve types, (Monostrut, Medtronic Hall, St. Jude Medical) were tested over a range of simulated cardiac outputs, and the effect of valve size was investigated with four Omniscience tilting disc valves (21, 23, 25 and 29 mm). Average energy of the reflected Doppler signal was used to quantify the amount of high intensity Doppler signal, QTCD. TCD signals recorded in vitro were visually and aurally similar to those found in prosthetic heart valve patients. All valve types generated exponentially more QTCD with increasing simulated cardiac output. Differences amongst valve types were only significant at higher flow outputs, with the Monostrut valve producing the greatest QTCD. Larger valves consistently generated greater QTCD than smaller valves. In conclusion, TCD signals found in prosthetic heart valve patients can be reproduced, at least qualitatively, using a mock circulatory loop which does not incorporate the formed elements of blood.(ABSTRACT TRUNCATED AT 250 WORDS)

Calcification and fatigue failure in a polyurethane heart value

The prosthetic heart valves were fabricated from a polyurethane containing a 4,4'-diphenylmethane diisocyanate hard segment, chain-extended with butanediol and with a polyether soft segment. The rate of calcification of these polyurethane heart valves was much slower in a dynamic in vitro test system than similar bioprosthetic heart valves. The calcified deposits were located exclusively at regions of material failure. Fourier transform infrared (FTIR) spectroscopy indicated the involvement of the polyether soft segments of the polymer directly in the calcification process. Calcification of polymer fractions also suggested that small molecular weight extractable components are accelerating factors in the calcification process.

Differentiation between gaseous and formed embolic materials in vivo. Application in prosthetic heart valve patients

BACKGROUND AND PURPOSE

Doppler emboli detection is an established technique, but the nature of the underlying embolic material remains unclear. The intensity and spectral distribution of emboli signals could help to distinguish between signals arising from formed and gaseous emboli. We undertook this study to develop and evaluate a differentiation algorithm based on the spectral characteristics of emboli signals. Subsequently the algorithm was applied to patients with mechanical prosthetic cardiac valves.

METHODS

Emboli signals detected in patients with carotid disease, acute stroke, and atrial fibrillation were used as formed emboli data, and signals detected in patients undergoing cardiac catheterization studies were used as gaseous emboli data. For each embolus signal, the maximal amplitude, the sum of amplitudes, and the spectral intensity distribution were calculated. Two hundred emboli signals from each category were used to develop a differentiation algorithm, which was subsequently evaluated on 501 additional solid and 995 gaseous emboli signals. The same algorithm was used to analyze 5958 emboli signals detected in 60 patients with mechanical prosthetic valves.

RESULTS

The best results were obtained with an algorithm based on both the maximal amplitude and the sum of amplitudes (sensitivity, 99%; specificity, 96.5%). On subsequent evaluation, the sensitivity and specificity of the algorithm were 99.6% and 89.8%, respectively. Of the 5958 emboli signals detected in prosthetic valve patients, 92.4% were classified as gaseous.

CONCLUSIONS

Differentiation between gaseous and formed emboli signals, as detected by transcranial Doppler in vivo, is feasible by means of spectral analysis. Application of the differentiation algorithm in prosthetic valve patients suggests that the embolic material in these patients is gaseous. The possibility of distinguishing between different formed embolic materials with this technique remains to be evaluated.

In vitro calcification of bioprosthetic heart valves: report of a novel method and review of the biochemical factors involved

The lifetime of bioprosthetic heart valves is limited by primary tissue failure and calcification of the valve leaflets. There are indications that synthetic elastomeric materials may also be subject to this problem. The mechanism of calcification is not known, but it is of interest that calcification can be induced in tissue even in the absence of cellular mechanisms, outside the body. Many hypotheses relate to inhibitory or promotory factors rather than primary instigators of calcification and none has led to a satisfactory solution of the problem. The study of calcification in replacement valves generally utilises in vivo test methods i.e. complex biologic systems. This creates difficulty in defining the primary factors involved. The use of in vitro test methods, including a novel fatigue tester method, has been reviewed. Various test media have been used, including simple salt solutions (allowing definition and controlled modification of the calcification medium) and bovine plasma. Comparison of static and dynamic in vitro methods with the rat subcutaneous implant model indicated a lower degree of calcification in vitro: the calcification achieved was, however, significantly greater than similar material not subject to calcification processes. Dynamic in vitro tests produced greater calcification than static in vitro tests. Porcine aortic valve material, in static tests, behaved similarly to bovine pericardium. In vitro calcification testing has a useful role to play in the economic screening of new materials or modifications of existing materials prior to in vivo testing. It may also aid the definition of the mechanism of calcification and hence the development of solutions to the problem.

Calcification and stress distribution in bovine pericardial heart valves

There is a strong relationship between mechanical stress and calcification in biological prosthetic heart valves. A dynamic in vitro calcification test has been used to study the relationship between stress distributions in the leaflets of bovine pericardial valves and the deposition of calcium over the leaflet surfaces. Intuitive stress regions have been defined over the leaflet surfaces. Calcium uptake by the leaflets has been assayed directly by ashing of leaflet material and analysis of the ash by atomic absorption spectrophotometry. Calcium and phosphorus distribution over the leaflet surface has been analyzed using energy-dispersive x-ray analysis by scanning electron microscope and data points assigned to the appropriate stress region. The uptake of calcium is assessed by comparing stress regions, surfaces, and the degree of calcification of the valve. Differences between stress regions and surfaces are significant. Uptake of calcium in these valves appears to be strongly related to the degree and type of stress present in the valve leaflets.

Calcification modelling in artificial heart valves

This study has examined a range of methods of studying the calcification process in bovine pericardial and polyurethane biomaterials. The calcification methods include static and dynamic, in vitro and in vivo tests. The analytical methods include measurement of depletion rates of calcium and phosphate from in vitro calcifying solutions, analysis of tissue contents of calcium, histological staining of tissue sections for calcium, X-ray elemental analysis, by scanning electron microscopy, of calcium and phosphorus distributions over valve leaflets calcified in vitro under dynamic conditions. Bovine pericardium, in all test settings, calcified to a much greater degree than polyurethane biomaterials. Polyurethane extracts calcified to a greater degree than bulk polyurethanes. The test protocol used allows progress through increasingly demanding calcification tests, with the possibility of eliminating unsuitable materials with tests of limited complexity and expense.

Chemical modification of bovine pericardium and its effect on calcification in the rat subdermal model

Specific modification of functional groups in collagen has been used to investigate their influence on calcification and thermal stability of bovine pericardium. Pretreatment of pericardium with iron (III) citrate reduced calcification in the rat subcutaneous implant model, as did acyl azide activation of carboxyl and amide groups. Chondroitin sulphate had no significant effect, while cyanamide treatment was mainly effective in combination with iron (III) citrate. Glutaraldehyde pretreatment restricted reaction with other modifying agents, but, as a post-fixation treatment, improved the thermal stability of other agents. Glutaraldehyde post-fixation had no significant relationship to the calcification rate.