An innovative Pickering W/O/W nanoemulsion co-encapsulating hydrophilic lysozyme and hydrophobic Perilla leaf oil for extending shelf life of fish products

A Pickering water-in-oil-in-water nanoemulsion co-encapsulating lysozyme (LYS) and Perilla leaf oil (PO) was prepared using whey protein isolate-tannin acid conjugated nanoparticles (WPI-TA NPs) as emulsifiers, called LYS-PO-NE, and subsequently analyzed. The nano size and multiple phases was confirmed based on the results of confocal laser scanning microscope, scanning electron microscope, and droplet size analysis. LYS-PO-NE had high encapsulation efficiencies of 89.36 % (PO) and 43.91 % (LYS) and both could be released at a slow and continuous rate. The PO addition increased the droplet size, and the LYS addition delayed the release of PO. LYS-PO-NE also showed good storage, pH, thermal, and salt stability, and an effective combined bactericidal activity of LYS and PO against spoilage bacteria. Furthermore, the results of chilled salmon storage experiments indicated that LYS-PO-NE could extend the shelf life of chilled salmon to at least 6 days, demonstrating the potential in the shelf life for fish products.

Enhanced Stability, Superior Anti-Corrosive, and Tribological Performance of Al2O3 Water-based Nanofluid Lubricants with Tannic Acid and Carboxymethyl Cellulose over SDBS as Surfactant

In this research work, the stability, tribological, and corrosion properties of a water-based Al2O3 nanofluid (0.5 wt%) formulated with tannin acid (TA) and carboxymethyl cellulose (CMC) as dispersants or surfactants were investigated. For comparative purposes, sodium dodecylbenzene sulfonate (SDBS) was also incorporated. The stability of the nanofluid was assessed through zeta potential measurements and photo-capturing, revealing the effectiveness of TA and CMC in preventing nanoparticle agglomeration. Tribological properties were examined using a pin-on-disk apparatus, highlighting the tribofilm of Al2O3 that enhanced lubricating properties of the nanofluid by the SEM, resulting in reduced friction and wear of the contacting surfaces. Sample with the addition of both TA and CMC exhibited the best tribological performance, with a ~ 20% reduction in the friction coefficient and a 59% improvement in wear rate compared to neat nanofluid without TA and CMC. Additionally, the corrosion resistance of the nanofluids were evaluated via weight loss and electrochemical impedance spectroscopy. The nanofluid sample containing both TA and CMC exhibited the lowest corrosion rate, with 97.6% improvement compared to sample without them. This study provides valuable insights into the potential applications of TA and CMC-based Al2O3 nanofluids as effective and environmentally friendly solutions for coolant or lubrication in cutting processes.

Multi-physics coupling reinforced polyvinyl alcohol/cellulose nanofibrils based multifunctional hydrogel sensor for human motion monitoring

Ionic conductive hydrogels have been widely used for sensor, energy storage and human-machine interface. To address the problems of the traditional ionic conductive hydrogels fabricated with the soaking method, such as the lack of frost resistance, poor mechanical properties, time-consuming and chemical-wasting, herein, a multi-physics crosslinking reinforced strong, anti-freezing and ionic conductive hydrogel sensor is fabricated utilizing the tannin acid-Fe₂(SO₄)₃ through the simple one-pot freezing-thawing process at low electrolyte concentration. The results show that the P₁₀C_0.4T₈-Fe₂(SO₄)₃ (PVA_10%CNF_0.4%TA_8%-Fe₂(SO₄)₃) displayed better mechanical property and ionic conductivity due to hydrogen bonding and coordination interaction. The tensile stress reaches up to 0.980 MPa (570 % strain). Moreover, the hydrogel presents excellent ionic conductivity (0.220 S⋅m^-1 at room temperature), anti-freezing performance (0.183 S⋅m^-1 at -18 °C), large gauge factor (1.75), excellent sensing stability, repeatability, durability and reliability. This work paves a way for preparing mechanical strong and anti-freezing hydrogel based on multi-physics crosslinking with one-pot freezing-thawing process.

Grafting natural nicotinamide on tempo-oxidized cellulose nanofibrils to prepare flexible and transparent nanocomposite films with fascinating mechanical strength and UV shielding performance

Light pollution from ultraviolet (UV) radiation is gaining growing concerns, as the emissions and burning of fossil fuels destroyed the ozone layer. Seeking a solution against skin exposure to excessive radiation is an urgent requirement. In this study, nicotinamide (NA), the main component of vitamin B3, was introduced as a new modifier into Tempo-oxidized cellulose nanofibrils (TOCNFs) together with the physical cross-linking with tannin acid (TA) to improve anti-UV performance of the nanocomposite films. Incorporation of NA into the films presents distinguished UV shielding capability UVB wavelength range from 200 nm to 320 nm (NTA1-5) due to the introduced functional groups like CO and benzene rings. Moreover, mechanical properties were notably enhanced, which overcome the low strength of common nanocellulosic materials. The stress increased from 69.8 MPa to 116.3 MPa, and the toughness can reach 131.58 MJ/m³ by tuning the additional amount of NA. Meanwhile, TGA and DTG analysis demonstrated that the incorporation of amide bonds and TA into the composite films greatly improved the thermal stability. Thus, the proposed materials fabricated from natural biomolecules show great potential in serving as new kinds of UV-resistant products in the application areas of sunscreen, protective clothing, and building materials.

Effects of tannic acid on the transport behavior of trivalent chromium in soils and its mechanism

Trivalent chromium [Cr(III)] and tannins serve as necessary substances in leather processing and coexist in tannery site, which lead to the chromium contamination in site soil when disposed improperly. However, coexisting tannins are very likely to complex with Cr(III) and affect its properties, ultimately changing the mobility of chromium in soil. In this study, tannic acid (TA) was selected to investigate the complexation with Cr(III) and the influence on the solubility and sorption of Cr(III) in soils. Then, the transport behavior and mechanism of Cr(III)-TA complexes in soil was clarified. Dialysis results showed that the increase of TA concentration and solution pH promoted the formation of complexed Cr(III). The results of UV-Vis absorption spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations indicated that the adjacent ionized phenolic hydroxyls in TA functioned as the binding sites with Cr(III) to form the Cr-O bonds and the degree of complexation increased with pH. The Cr(III)-TA complexes had higher solubility than free Cr(III) at pH ≥ 6.0. Batch sorption experiments demonstrated that the sorption capacity of Cr(III)-TA to soils with different pH was always lower than that of free Cr(III). These reasons led to the stronger mobility of Cr(III)-TA in soil columns than Cr(III). Our research reveals that the enhanced mobility of Cr(III) in soils coexisting with TA.

Improving fermentation, protein preservation and antioxidant activity of Moringa oleifera leaves silage with gallic acid and tannin acid

Whether tannins reducing proteolysis is related to protease or the antioxidant capacity could be preserved during Moringa oleifera leaves (MOL) ensiling are unclear. In the present study, MOL ensiled with 1% and 2% gallic acid (GA) or tannic acid (TA) were analyzed for fermentation parameters, protein fractions, protease activities and antioxidant capacity on day 3, 7, 14 and 30 of ensiling. The results showed that GA and TA decreased dry matter loss (11.13% vs 8.35% and 3.11%, in the level of 2%) and proteolysis (nonprotein-N: 56.31% vs 32.64% and 26.04% TN). Meanwhile, GA and TA increased pH, yeasts number, ammonia-N content and aminopeptidase activity. The antioxidant capacity of MOL silage gradually increased during ensiling, and was dramatically enhanced by the addition of GA and TA. In conclusion, this study suggests that GA and TA could help to improve the preservation of protein and antioxidant capacity during MOL ensiling.

Tannin-based adhesive for protection of colonic anastomosis in the open abdomen

This study was aimed to evaluate the effect of tannin acid- polyethylene glycol (TP) adhesive on the wound healing process of primary colonic anastomosis in the open abdomen (OA). Adhesion strength test, degradation and hemostatic ability of TP were investigated. In a rat model, after standard colonic anastomoses, rats were divided into three groups: OA group; OA + FG (fibrin glue) group; OA + TP group. Five days after surgery, body weight, anastomotic bursting pressure (ABP), and histology of anastomotic tissue were evaluated. Performance of adhesion strength and hemostatic ability of TP was better than that of FG. The weight of TP decreased by over 50% after 11-day incubation. All rats survived well after surgery. Compared to OA group and OA + FG group, OA + TP group showed a significant improvement in body weight, ABP and healing state. Application of TP adhesive, used as an auxiliary treatment of colonic anastomosis operation, improved the wound strength and promoted the anastomotic healing after OA.