Quantum Dots in Transition Metal Dichalcogenides Induced by Atomic-Scale Deformations

Single-photon emission from monolayer transition metal dichalcogenides requires the existence of localized, atom-like states within the extended material. Here, we predict from first-principles the existence of quantum dots around atomic-scale protrusions, which result from substrate roughness or particles trapped between layers. Using density functional theory, we find such deformations to give rise to local membrane stretching and curvature, which lead to the emergence of gap states. Having enhanced outer-surface localization, they are prone to mixing with states pertaining to chalcogen vacancies and adsorbates. If the deformation is sharp, the conduction band minimum furthermore assumes atomic and valley-mixed character, potentially enabling quantum light emission. When such structural defects are arranged in an array, the new states couple to form energetically separated sub-bands, holding promise for intriguing superlattice dynamics. All of the observed features are shown to be closely linked to elastic, deformation-induced intra- and intervalley scattering processes.

Minimizing Deformations in High-Temperature Vacuum Carburizing

This article presents the results of a study on reducing deformations resulting from high-temperature vacuum carburizing and post-carburizing heat treatment. The idea was to increase the strength of steel at elevated temperatures by pre-carburizing at heat-up to the process temperature (SC-stage carburizing). It has been shown that the use of carburizing in stages from a lower temperature to the target temperature, compared to traditional vacuum carburizing at a constant temperature (Constant-Temperature Carburizing-CTC), has a significant impact on the chemical and phase composition of the technological layer, surface after the process and, consequently, on its mechanical properties. It was shown that the retained austenite content after stage carburizing was reduced by approximately 45%, as was the thickness of the gear teeth measured at the pitch diameter. Additionally, uniform stress distribution was demonstrated for the SC process. Carbon saturation of austenite increases the yield strength, and therefore the dimensional stability of steel heat-treated at elevated temperatures also improves, which effectively permits high-temperature treatment of critical steel parts such as, for example, gear wheels, for which high dimensional accuracy is required.

Study of the Relationship between Changes in the Structural, Optical, and Strength Properties of AlN Ceramics Subjected to Irradiation with Heavy Xe23+ Ions

The purpose of this study is to comprehensively analyze the influence of different fluences of irradiation with Xe23+ heavy ions on alterations in the structural, optical, and strength properties of AlN ceramics and to establish a connection between structural distortions and alterations in the optical and mechanical properties of the ceramics. X-ray diffraction, UV-Vis and Raman spectroscopy, and indentation and single-compression methods were used as research methods. During the study, it was demonstrated that at low irradiation fluences, the main role in the changes in the properties of the AlN ceramics is played by effects related to changes in their optical properties and a fundamental absorption edge shift, which characterizes changes in the electronic properties of the ceramics (changes in the distribution of electron density). A study of the variations in the optical properties of the examined samples in relation to the irradiation fluence showed that when the fluence surpasses 5 × 1011 ion/cm2, an extra-spectral absorption band emerges within the range of 3.38-3.40 eV. This band is distinctive for the creation of vacancy ON-VAl complexes within the damaged layer's structure. The presence of these complexes signifies structural deformations and the accumulation of defective inclusions within the damaged layer. An analysis of changes in the parameters of the crystal lattice showed that structural distortions in the damaged layer are due to the accumulation of tensile residual mechanical stresses, an increase in the concentration of which leads to the swelling and destruction of the damaged layer. Some correlations between the mechanical properties of ceramics and the irradiation fluence indicate the ceramics' remarkable resistance to radiation-induced brittleness and weakening. These effects become apparent only when structural damage accumulates, resulting in the swelling of the crystal lattice exceeding 2.5-3%.

Elements of Designing Upholstered Furniture Sandwich Frames Using Finite Element Method

This paper presents an approach to the design of an upholstered furniture frame using the finite element method and empirical studies. Three-dimensional discrete models of upholstered furniture frames were developed taking into account orthotropic properties of solid pine wood (Pinus sylvestris L.) without and with details strengthening their structure in the form of glue joints and upholstery staples. Using the CAE Autodesk Inventor Nastran finite element method, linear static analyses were performed by simulating normative loading. The finite element method was performed considering the experimentally determined stiffness coefficients of the PCAC adhesive and staple joints. As a result, stress, displacement, and equivalent strain distributions were obtained for upholstered furniture frame models with stapled corner joints. The deformation and strength behavior of the upholstered furniture frames was improved by reinforcing with a wood strip. A new approach to the design of upholstered furniture frame frames using the FEM method with stapled component connections was developed and tested. The results of the study can be applied in the optimization of upholstered furniture construction.

TLS-Detectable Plane Changes for Deformation Monitoring

TLS is nowadays often used for deformation monitoring. As it is not able to scan identical points in different time epochs, mathematical models of objects derived from point clouds have to be used. The most common geometric form to describe built objects is a plane, which can be described by four parameters. In this study, we aimed to find out how small changes in the parameters of the plane can be detected by TLS. We aimed to eliminate all possible factors that influence the scanning. Then, we shifted and tilted a finite physical representation of a plane in a controlled way. After each controlled change, the board was scanned several times and the parameters of the plane were calculated. We used two different types of scanning devices and compared their performance. The changes in the plane parameters were compared with the actual change values and statistically tested. The results show that TLS detects shifts in the millimetre range and tilts of 150″ (for a 1 m plane). A robotic total station can achieve twice the precision of TLS despite lower density and slower performance. For deformation monitoring, we strongly recommend repeating each scan several times (i) to check for gross errors and (ii) to obtain a realistic precision estimate.

Deformations in Cement Pastes during Capillary Imbibition and Their Relation to Water and Isopropanol as Imbibing Liquids

The traditional approach for evaluating capillary imbibition, which describes the phenomena as a linear relationship between mass gain and the square root of time, considers a rigid pore structure. The common deviation from the linearity when using the square-root law (manifested in a downward curvature, i.e., slower water ingress) can be explained by considering a changing pore structure during the process caused by the swelling of calcium silicate hydrate (C-S-H) during water ingress. Analysing how the combination of deforming phase (C-S-H), non-deforming phase, and porosity affects the capillary water ingress rate is relevant for a deeper understanding of concrete durability. In this research, the C-S-H content was quantified by means of XRD diffraction coupled with Rietveld + PONKCS, dynamic water sorption (DVS), and SEM/BSE images coupled with phase mapping using PhAse Recognition and Characterization (PARC) software. The porosity was assessed by mercury intrusion porosimetry, water absorption under vacuum, and DVS. Furthermore, to assess deformations occurring with water and a non-aqueous imbibant, capillary imbibition tests with water and isopropanol as invading liquids were performed along with simultaneous deformation measurements. The relation between the relative C-S-H content and porosity has a great impact on the transport process. Samples exposed to isopropanol presented a much larger liquid uptake but significantly fewer deformations in comparison to imbibition with water. The effects of the changing pore structure were also evaluated with the Thomas and Jennings model, from which calculations indicated that pore shrink during imbibition. A comprehensive description of the relation between deformations and capillary imbibition in cement pastes reveals that liquid ingress is highly influenced by deformations.

The Influence of Welding Heat Source Inclination on the Melted Zone Shape, Deformations and Stress State of Laser Welded T-Joints

The paper concerns the numerical analysis of the influence for three different of welding heat source inclinations on the weld pool shape and mechanical properties of the resulting joint. Numerical analysis is based on the experimental tests of single-side welding of two sheets made of X5CrNi18-10 stainless steel. The joint is made using a laser welding heat source. Experimental test was performed for one heating source inclination. As a part of the work metallographic tests are performed on which the quality of obtained joints are determined. Numerical calculations are executed in Abaqus FEA. The same geometrical model is assumed as in the experiment. Material model takes into account changing with temperature thermophysical properties of austenitic steel. Modeling of the motion of heating source is performed in additional subroutine. The welding source parameters are assumed in accordance with the welding process parameters. Numerical calculations were performed for three different inclinations of the source. One inclination is consistent with experimental studies. The performed numerical calculations allowed to determine the temperature field, shape of welding pool as well as deformations and stress state in welded joint. The obtained results are compared to results of the experiment.

Semiautomatic quantification of abdominal wall muscles deformations based on dynamic MRI image registration

Quantitative analysis of abdominal organs motion and deformation is crucial to better understand biomechanical alterations undermining respiratory, digestive or perineal pathophysiology. In particular, biomechanical characterization of the antero-lateral abdominal wall is central in the diagnosis of abdominal muscle deficiency. Here, we present a dedicated semiautomatic dynamic MRI postprocessing method enabling the quantification of spatial and temporal deformations of the antero-lateral abdominal wall muscles. Ten healthy participants were imaged during a controlled breathing session at the L3-L4 disc level using real-time dynamic MRI at 3 T. A coarse feature-tracking step allowed the selection of the inhalation cycle of maximum abdominal excursion. Over this image series, the described method combines (1) a supervised 2D+t segmentation procedure of the abdominal wall muscles, (2) the quantification of muscle deformations based on masks registration, and (3) the mapping of deformations within muscle subzones leveraging a dedicated automatic parcellation. The supervised 2D+t segmentation (1) provided an accurate segmentation of the abdominal wall muscles throughout maximum inhalation with a 0.95 ± 0.03 Dice similarity coefficient (DSC) value and a 2.3 ± 0.7 mm Hausdorff distance value while requiring only manual segmentation of 20% of the data. The robustness of the deformation quantification (2) was indicated by high indices of correspondence between the registered source mask and the target mask (0.98 ± 0.01 DSC value and 2.1 ± 1.5 mm Hausdorff distance value). Parcellation (3) enabled the distinction of muscle substructures that are anatomically relevant but could not be distinguished based on image contrast. The present genuine postprocessing method provides a quantitative analytical frame that could be used in further studies for a better understanding of abdominal wall deformations in physiological and pathological situations.

The plastic cell: mechanical deformation of cells and tissues

Epithelial cells possess the ability to change their shape in response to mechanical stress by remodelling their junctions and their cytoskeleton. This property lies at the heart of tissue morphogenesis in embryos. A key feature of embryonic cell shape changes is that they result from repeated mechanical inputs that make them partially irreversible at each step. Past work on cell rheology has rarely addressed how changes can become irreversible in a complex tissue. Here, we review new and exciting findings dissecting some of the physical principles and molecular mechanisms accounting for irreversible cell shape changes. We discuss concepts of mechanical ratchets and tension thresholds required to induce permanent cell deformations akin to mechanical plasticity. Work in different systems has highlighted the importance of actin remodelling and of E-cadherin endocytosis. We also list some novel experimental approaches to fine-tune mechanical tension, using optogenetics, magnetic beads or stretching of suspended epithelial tissues. Finally, we discuss some mathematical models that have been used to describe the quantitative aspects of accounting for mechanical cell plasticity and offer perspectives on this rapidly evolving field.

Techniques for Thin-Walled Element Milling with Respect to Minimising Post-Machining Deformations

The paper examines the impact of selected machining techniques and the semi-finished product technological history on deformations of thin-walled elements made of EN AW-2024 T351 aluminium alloy after milling. The following techniques have been implemented: High Performance Cutting, High Speed Cutting, conventional finishing (CF) and combinations of these techniques. As for the semi-finished product technological history, the rolling direction has been analysed. It has been assumed that it can be relevant in relation to the cutting tool feed direction and, in consequence, exert considerable impact on the stress, as well as deformation following machining. The interest in this issue proceeds from significant challenges faced by the industry, particularly in the aerospace sector. The analysis of results obtained has shown that milling in the direction perpendicular to the rolling direction results in larger deformations than milling in the parallel direction. Additionally, it has been revealed that applying a correctly selected machining technique makes it possible to minimise post-machining deformations of thin-walled elements.

An Improved Analytical Solution for Process-Induced Residual Stresses and Deformations in Flat Composite Laminates Considering Thermo-Viscoelastic Effects

Dimensional control can be a major concern in the processing of composite structures. Compared to numerical models based on finite element methods, the analytical method can provide a faster prediction of process-induced residual stresses and deformations with a certain level of accuracy. It can explain the underlying mechanisms. In this paper, an improved analytical solution is proposed to consider thermo-viscoelastic effects on residual stresses and deformations of flat composite laminates during curing. First, an incremental differential equation is derived to describe the viscoelastic behavior of composite materials during curing. Afterward, the analytical solution is developed to solve the differential equation by assuming the solution at the current time, which is a linear combination of the corresponding Laplace equation solutions of all time. Moreover, the analytical solution is extended to investigate cure behavior of multilayer composite laminates during manufacturing. Good agreement between the analytical solution results and the experimental and finite element analysis (FEA) results validates the accuracy and effectiveness of the proposed method. Furthermore, the mechanism generating residual stresses and deformations for unsymmetrical composite laminates is investigated based on the proposed analytical solution.

Local Deformation of Glasses is Mediated by Rigidity Fluctuation on Nanometer Scale

Microscopic deformation processes determine defect formation on glass surfaces and, thus, the material's resistance to mechanical failure. While the macroscopic strength of most glasses is not directly dependent on material composition, local deformation and flaw initiation are strongly affected by chemistry and atomic arrangement. Aside from empirical insight, however, the structural origin of the fundamental deformation modes remains largely unknown. Experimental methods that probe parameters on short or intermediate length-scale such as atom-atom or superstructural correlations are typically applied in the absence of alternatives. Drawing on recent experimental advances, spatially resolved Raman spectroscopy is now used in the THz-gap for mapping local changes in the low-frequency vibrational density of states. From direct observation of deformation-induced variations on the characteristic length-scale of molecular heterogeneity, it is revealed that rigidity fluctuation mediates the deformation process of inorganic glasses. Molecular field approximations, which are based solely on the observation of short-range (interatomic) interactions, fail in the prediction of mechanical behavior. Instead, glasses appear to respond to local mechanical contact in a way that is similar to that of granular media with high intergranular cohesion.

Investigation of the Behavior of Hardening Masonry Exposed to Variable Stresses

This paper analyzes the behavior of masonry under variable loads during execution (construction stage). It specifies the creep coefficient for calcium silicate brick masonry, presenting the research data of masonry deformation under variable and constant long-term loads. The interaction of separate layers of composite material in masonry is introduced and the formulae for determining long-term deformations are offered. The research results of masonry’s compressive strength and deformation properties under variable and constant long-term loads are presented. These are then compared to calculated ones. According to the presented comparison, the calculated long-term deformations coincide quite well with those determined experimentally.

Limb flexion-induced axial compression and bending in human femoropopliteal artery segments

BACKGROUND

High failure rates of femoropopliteal artery (FPA) interventions are often attributed in part to severe mechanical deformations that occur with limb movement. Axial compression and bending of the FPA likely play significant roles in FPA disease development and reconstruction failure, but these deformations are poorly characterized. The goal of this study was to quantify axial compression and bending of human FPAs that are placed in positions commonly assumed during the normal course of daily activities.

METHODS

Retrievable nitinol markers were deployed using a custom-made catheter system into 28 in situ FPAs of 14 human cadavers. Contrast-enhanced, thin-section computed tomography images were acquired with each limb in the standing (180 degrees), walking (110 degrees), sitting (90 degrees), and gardening (60 degrees) postures. Image segmentation and analysis allowed relative comparison of spatial locations of each intra-arterial marker to determine axial compression and bending using the arterial centerlines.

RESULTS

Axial compression in the popliteal artery (PA) was greater than in the proximal superficial femoral artery (SFA) or the adductor hiatus (AH) segments in all postures (P = .02). Average compression in the SFA, AH, and PA ranged from 9% to 15%, 11% to 19%, and 13% to 25%, respectively. The FPA experienced significantly more acute bending in the AH and PA segments compared with the proximal SFA (P < .05) in all postures. In the walking, sitting, and gardening postures, average sphere radii in the SFA, AH, and PA ranged from 21 to 27 mm, 10 to 18 mm, and 8 to 19 mm, whereas bending angles ranged from 150 to 157 degrees, 136 to 147 degrees, and 137 to 148 degrees, respectively.

CONCLUSIONS

The FPA experiences significant axial compression and bending during limb flexion that occur at even modest limb angles. Moreover, different segments of the FPA appear to undergo significantly different degrees of deformation. Understanding the effects of limb flexion on axial compression and bending might assist with reconstructive device selection for patients requiring peripheral arterial disease intervention and may also help guide the development of devices with improved characteristics that can better adapt to the dynamic environment of the lower extremity vasculature.

Deformations and cyclic fatigue resistance of nickel-titanium instruments inside a sequence

AIM

To compare the effect of brushing motion on torsional and cyclic fatigue resistance of TF Adaptive instruments after clinical use.

METHODS

20 packs of TFA small sequence (SybronEndo, Orange, CA, USA) were used for this study and divided into two groups. Each instrument prepared one resin tooth, consisting in 4 canals with a complex anatomy. In group A, no brushing motion was performed. In group B, after the green instrument reached the working length, brushing motion with circumferential filing was performed for 15 seconds in each canal (overall 1 minute). All the instruments were then subjected to cyclic fatigue test and mean values and standard deviation for time to fracture were evaluated. Data were subjected to one-way analysis of variance and Bonferroni t-test procedure with a significance set at P < 0.05.

RESULTS

No instruments were broken during preparation of root canals. Two TF Adaptive green and 5 yellow showed unwinding after intracanal clinical use. No statistically significant differences were found between green instruments of both groups (P > 0.05), while a statistically significant difference was found between the yellow instruments (P < 0.05), with group B showing an higher resistance to cyclic fatigue.

CONCLUSIONS

A prolonged passive brushing motion did not adversely affected mechanical resistance of the instrument used for this purpose. Resistance to both deformations and cyclic fatigue of the second instrument within the TFA small sequence was enhanced by the coronal flaring provided by the brushing action of the first instrument used.

Three-dimensional measurement of wedged scoliotic vertebrae and intervertebral disks

Idiopathic scoliosis involves complex spinal intrinsic deformations such as the wedging of vertebral bodies (VB) and intervertebral disks (ID), and it is obvious that the clinical evaluation obtained by the spinal projections on the two-dimensional (2D) radiographic planes do not give a full and accurate interpretation of scoliotic deformities. This paper presents a method that allows reconstruction in 3D of the vertebral body endplates and measurement of the 3D wedging angles. This approach was also used to verify whether 2D radiographic measurements could lead to a biased evaluation of scoliotic spine wedging. The 3D reconstruction of VB contours was done using calibrated biplanar X-rays and an iterative projection computer procedure that fits 3D oriented ellipses of adequate diameters onto the 3D endplate contours. "3D wedging angles" of the VB and ID (representing the maximum angle between adjacent vertebrae) as well as their angular locations with respect to the vertebral frontal planes were computed by finding the positions of the shortest and longest distances between consecutive endplates along their contour. This method was extensively validated using several approaches: (1) by comparing the 3D reconstructed endplates of a cadaveric functional unit (T8-T9) with precise 3D measurements obtained using a coordinate measuring machine for 11 different combinations of vertebral angular positions; (2) by a sensitivity study on 400 different vertebral segments mathematically generated, with errors randomly introduced on the digitized points (standard deviations of 0.5, 1, 2, and 3 mm); (3) by comparing the clinical wedging measurements (on postero-anterior and lateral radiographs) at the thoracic apical level of 34 scoliotic patients (15 degrees < Cobb < 45 degrees) to the computed values. Mean errors for the 11 vertebral positions were 0.5 +/- 0.4 mm for VB thickness, less than 2.2 degrees for endplate orientation, and about 11 degrees (3 mm) for the location of the maximum 3D wedging angle along the endplate contour. The errors below 2 mm (introduced on the digitized points) slightly affected the 3D wedging angle (< 2 degrees) and its location (< 4 degrees) for the ID. As for the clinical evaluation, average angular errors were less than 0.4 degrees in the radiographic frontal and lateral planes. The mean 3D wedged angles were about 4.9 degrees +/- 1.9 degrees for the VB and 6.0 degrees +/- 1.7 degrees for the ID. Linear relations were found between the 2D and the 3D angles, but the 3D angles were located on diagonal planes statistically different than the radiographic ones (between 100 degrees and 221 degrees). There was no statistical relation between the 2D radiographic angles and the locations of the 3D intervertebral wedging angles. These results clearly indicate that VB and ID endplates are wedged in 3D, and that measurements on plain radiographs allow incomplete evaluation of spinal wedging. Clinicians should be aware of these limitations while using wedging measurements from plain radiographs for diagnosis and/or research on scoliotic deformities.