Optimizing fracture resistance of endodontically treated maxillary premolars restored with preheated thermos-viscous composite post-thermocycling, a comparative study. Part I

PURPOSE

This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro.

METHODOLOGY

Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode. Teeth were kept in distilled water for 24 h at 37 °C proceeded by thermocycling (5- 55 °C, 1200×). Teeth were then exposed to compressive load till fracture at a crosshead speed of 1 mm/min. One-way ANOVA followed by Tukey post-hoc test was implemented to compare between more than two groups in non-related samples. The significance level was established at α = 0.05 for both tests.

RESULTS

Intact teeth significantly recorded the highest fracture resistance values among all groups. A significant difference was recorded among all the tested groups, with the EF recording the highest values, followed by the VB group then the XF group and ChP that recorded the lowest data. Negative control premolars significantly recorded the lowest fracture.

CONCLUSIONS

After thermocycling, endodontically treated maxillary premolars restored with pre-heated thermos-viscous composite did not exhibit an increase in fracture resistance. Notably, our findings indicate that short fiber-reinforced composite demonstrated significantly higher fracture resistance compared to other types of composites assessed in this study. This suggests the potential superiority of short fiber-reinforced composite in enhancing the overall structural integrity of endodontically treated teeth subjected to occlusal forces.

Elastic Constants of Polymeric Fiber Composite Estimation Using Finite Element Method

Determining the properties of composite materials (knowing the properties of the component phases) is a primary objective in the design phase. Numerous methods have been developed to determine the elastic constants of a composite material. All these methods are laborious and require significant computing time. It is possible to make experimental measurements, but these too are expensive and time-consuming. In order to have a quick estimate of the value of the engineering constants of a new composite material (in our study a polymeric matrix reinforced with carbon fibers), this paper proposes a quick method for determining the homogenized material constants, using the finite element method (FEM). For this, the eigenfrequencies of a beam specimen manufactured by the studied composite material will be computed using FEM. The model will consider both phases of the composite, with the geometry and real size. The mechanical properties of the constituent's material phases are known. With the help of this model, the torsional, longitudinal and transverse vibrations of the beam are studied. Based on the eigenvalues obtained by this calculation, it now is possible to quickly estimate the values of homogenized material constants required in the design. An example for a fiber-reinforced polymer composite material is provided in the paper.

Numerical Study of Low-Velocity Impact Response of a Fiber Composite Honeycomb Sandwich Structure

Engineering applications for honeycomb sandwich structures (HSS) are well recognized. Heterogeneous structures have been created using polyetheretherketone (PEEK) material, glass fiber-reinforced PEEK (GF-PEEK), and carbon fiber-reinforced PEEK (CF-PEEK) to further enhance the load-carrying capacity, stiffness, and impact resistance of HSS. In this study, we investigated the low-velocity impact response of HSS using numerical simulation. Our findings demonstrate that the choice of construction material significantly affects the impact resistance and structural stability of the HSS. We found that using fiber-reinforced PEEK significantly enhances the impact resistance of the overall structure, with GF-PEEK identified as the more appropriate face sheet material for the composite HSS based on a comparative study of load-displacement curves. Analysis of the plastic deformation of the honeycomb core, in combination with the stress and strain distribution of the composite HSS after low-velocity impact, indicates that CF-PEEK face sheets cause more noticeable damage to the core, resulting in evident plastic deformation. Additionally, we discovered that the use of fiber-reinforced materials effectively reduces deflection during low-velocity dynamic impact, particularly when both the face sheet and honeycomb core of the HSS are composed of the same fiber-reinforced PEEK material. These results provide valuable insights into the design and optimization of composite HSS for impact resistance applications.

The Influence of Fiber on the Mechanical Properties of Geopolymer Concrete: A Review

Geopolymer is widely used as a supplement to cementitious composites because of its advantages of low carbon and environmental protection, and geopolymer concrete is also broadly used in practical engineering. In recent years, geopolymer concrete has attracted increasing interest owing to its superior mechanical properties, and a series of research results have been obtained. In this paper, from the preparation of geopolymer concrete, based on the characteristics that geopolymer concrete is brittle and easy to crack, the types and basic properties of fibers to enhance the toughness of concrete are analyzed, the advantages and disadvantages of different fibers used as a material to enhance the toughness of concrete are summarized, and we review the effects of type, shape, volume rate, aspect ratio, and hybrid fiber combinations on the static mechanical properties. The results indicate that fibers have significant potential to enhance the compressive strength, splitting tensile strength, flexural strength, and fracture toughness of geopolymer concrete, and the optimal fiber volume rate seems to be related to the fiber type. Whereas the effect of aspect ratio and hybrid fiber combinations on the properties of geopolymer concrete seems to be obvious. This paper reviews the influence of fiber on the basic mechanical properties of geopolymer concrete, which provides a solid foundation to promote the further development and application of the research on the toughness of fiber-reinforced geopolymer concrete and provides recommendations for future research.

Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls

Unreinforced masonry (URM) is one of the most popular construction materials around the world, but vulnerable during earthquakes. Due to its brittle nature, the URM structures may lead to a possible collapse of the wall of a building during earthquake events causing casualties. In the current research, an attempt is made to enhance the seismic capacity of URM structures by proposing a new innovative composite material that can improve the shear strength and deformation capacity of the URM wall systems. The results revealed that the fiber-reinforced plastic having high tensile and shear stiffness can significantly increase in-plane as well as out-of-plane bending strength of the URM wall. It was recorded that the bending moment of the prism increased up to 549.5% by increasing the bending moment from 490 N*mm to 3183 N*mm per mm deflection of prism upon using glass fibers. Moreover, the ductility ratio amplified up to 5.73 times while the stiffness ratio increased up to 4.16 times with the aid of glass fibers. Since the material used in this research work is low cost, easily available, and no need for any skilled labor, which is economically good. Therefore, the URM walls retrofitted with fiber-reinforced plastic is an economical solution.

Numerical Simulation on Thermal Stresses and Solidification Microstructure for Making Fiber-Reinforced Aluminum Matrix Composites

The fabrication of fiber-reinforced metal matrix composites (MMCs) mainly consists of two stages: infiltration and solidification, which have a significant influence on the properties of MMCs. The present study is primarily focused on the simulation of the solidification process and the effect of the active cooling of fibers with and without nickel coating for making the continuous carbon fiber-reinforced aluminum matrix composites. The thermomechanical finite element model was established to investigate the effects of different cooling conditions on the temperature profile and thermal stress distributions based on the simplified physical model. The predicted results of the temperature distribution agree well with the results of the references. Additionally, a three-dimensional cellular automata (CA) finite element (FE) model is used to simulate the microstructure evolution of the solidification process by using ProCAST software. The results show that adding a nickel coating can make the heat flux smaller in the melt, which is favorable for preventing debonding at the coating/fiber and alloy interface and obtaining a finer microstructure. In the presence of the nickel coating, the number of grains increases significantly, and the average grain size decreases, which can improve the properties of the resultant composite materials. Meanwhile, the predicting results also show that the interfaces of fiber–coating, fiber–melt, and coating–melt experience higher temperature gradients and thermal stresses. These results will lead to the phenomenon of stress concentration and interface failure. Thus, it was demonstrated that these simulation methods could be helpful for studying the solidification of fiber-reinforced MMCs and reducing the number of trial-and-error experiments.

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

Carbon aerogels (CAs) are attractive candidates for the thermal protection of aerospace vehicles due to their excellent thermostability and thermal insulation. However, the brittleness and low mechanical strength severely limits their practical applications, and no significant breakthroughs in large CAs with a high strength have been made. We report a high-pressure-assisted polymerization method combined with ambient pressure drying to fabricate large, strong, crack-free carbon/carbon (C/C) composites with an excellent load-bearing capacity, thermal stability, and thermal insulation. The composites are comprised of an aerogel-like carbon matrix and a low carbon crystallinity fiber reinforcement, featuring overlapping nanoparticles, macro-mesopores, large particle contact necks, and strong fiber/matrix interfacial bonding. The resulting C/C composites with a medium density of 0.6 g cm^-3 have a very high compressive strength (80 MPa), in-plane shear strength (20 MPa), and specific strength (133 MPa g^-1 cm³). Moreover, the C/C composites of 7.5-12.0 mm in thickness exposed to an oxyacetylene flame at 1800 °C for 900 s display very low back-side temperatures of 778-685 °C and even better mechanical properties after the heating. This performance makes the composites ideal for the ultrahigh temperature thermal protection of aerospace vehicles where both excellent thermal-insulating and load-bearing capacities are required.

Fiber-Reinforced Resin Composite

Objectives: To investigate in vitro post-fatigue fracture behavior of endodontically treated molars having been differently restored. Methods: A total of 120 extracted human molars were used. A total of 120 specimens in 14 test groups and one control group (n = 8) were root canal treated. After postendodontic sealing and build-up (AdheSE Universal, SDR), additional MOD preparations were cut. Postendodontic restorations were: Direct restorations (Tetric EvoCeram BulkFill bonded with AdheSE Universal and EverX Posterior/Essentia bonded with G-Premio Bond; as filling (F) or direct partial crown (DPC) after reducing the cusps 2 mm; indirect adhesive restorations (partial crown/PC vs. full crown/FC): e.max CAD, Celtra Duo, both luted with Variolink Esthetic; indirect zirconia restorations (partial crown/PC vs. full crown/FC), luted with RelyX Unicem 2; indirect non-bonded cast gold restorations (partial crown/PC vs. full crown/FC; Degunorm), luted with Ketac Cem. Before and after 300,000 thermocycles (5/55 °C) and 1.2 Mio. A total of 100 N load cycles, replicas were analyzed under a SEM for marginal quality in enamel and dentin (where applicable) and finally, specimens were loaded until fracture. Results: In direct groups, there was no difference between RC and FRC in fracture strength (p > 0.05); however, direct partial crowns showed higher post-fatigue fracture resistance. Regarding marginal quality, intracoronal FRC restorations exhibited more gap-free margins in enamel than RC. In the indirect groups, there was no significant difference between partial and full crowns in any of the adhesively luted ceramic groups regarding post-fatigue fracture resistance. Zirconia partial crowns exhibited significantly lower marginal quality in enamel. Indirect groups performed significantly better than direct groups in fracture resistance. Within the indirect restorations, both cast gold groups and zirconia full crowns exhibited the highest fracture resistance being superior to control teeth. Significances: Within the limits of this in vitro investigation, it can be concluded that any kind of indirect restoration with cusp replacement is suitable for ETT restoration when a certain cavity extension is exceeded. All indirect restorations, i.e., endocrowns, partial crowns, and full crowns showed a promising performance after in vitro fatigue-loading.

A Novel, Multifunctional, Floatable, Lightweight Cement Composite: Development and Properties

This paper presents the development of a novel, multifunctional, floatable, lightweight cement composite (FLCC) using three different types of glass microspheres for structural engineering applications. Eight different mixtures of FLCC were produced and their matrix-related parameters were examined experimentally by adopting different types of microsphere fillers, fiber content (polyethylene fibers (PE)), and water-to-binder ratios. Along with the mechanical properties such as compressive, flexural, tensile strengths, and modulus of elasticity, the water tightness of the material was evaluated by sorptivity measurements and the energy efficiency by thermal conductivity. The optimal FLCC has an oven-dry density of 750 kg/m³, compressive strength (f_cm) up to 41 MPa after 28-day moist curing, low thermal conductivity of 0.152 W/mK, and very low sorptivity. It is found that an optimized amount of PE fiber is beneficial for improving the tensile resistance and ductility of FLCC while a relatively large amount of microspheres can increase the entrapped air voids in the FLCC matrix and reduce its density and thermal conductivity. Microstructural analysis by scanning electron microscopy (SEM) reveals that the microspheres are distributed uniformly in the cement matrix and are subjected to triaxial compression confinement, which leads to high strength of FLCC. Segregation due to density difference of FLCC ingredients is not observed with up to 60% (by weight) of glass microspheres added. Compared to the other lightweight aggregate concretes, the proposed FLCC could be used to build floating concrete structures, insulating elements, or even load-bearing structural elements such as floor and wall panels in which self-weight is a main concern.

Composite Cellularized Structures Created from an Interpenetrating Polymer Network Hydrogel Reinforced by a 3D Woven Scaffold

Biomaterial scaffolds play multiple roles in cartilage tissue engineering, including controlling architecture of newly formed tissue while facilitating growth of embedded cells and simultaneously providing functional properties to withstand the mechanical environment within the native joint. In particular, hydrogels-with high water content and desirable transport properties-while highly conducive to chondrogenesis, often lack functional mechanical properties. In this regard, interpenetrating polymer network (IPN) hydrogels can provide mechanical toughness greatly exceeding that of individual components; however, many IPN materials are not biocompatible for cell encapsulation. In this study, an agarose and poly(ethylene) glycol IPN hydrogel is seeded with human mesenchymal stem cells (MSCs). Results show high viability of MSCs within the IPN hydrogel, with improved mechanical properties compared to constructs comprised of individual components. These properties are further strengthened by integrating the hydrogel with a 3D woven structure. The resulting fiber-reinforced hydrogels display functional macroscopic mechanical properties mimicking those of native articular cartilage, while providing a local microenvironment that supports cellular viability and function. These findings suggest that a fiber-reinforced IPN hydrogel can support stem cell chondrogenesis while allowing for significantly enhanced, complex mechanical properties at multiple scales as compared to individual hydrogel or fiber components.

Computational efficiency of numerical approximations of tangent moduli for finite element implementation of a fiber-reinforced hyperelastic material model

In this study, we evaluated computational efficiency of finite element (FE) simulations when a numerical approximation method was used to obtain the tangent moduli. A fiber-reinforced hyperelastic material model for nearly incompressible soft tissues was implemented for 3D solid elements using both the approximation method and the closed-form analytical method, and validated by comparing the components of the tangent modulus tensor (also referred to as the material Jacobian) between the two methods. The computational efficiency of the approximation method was evaluated with different perturbation parameters and approximation schemes, and quantified by the number of iteration steps and CPU time required to complete these simulations. From the simulation results, it can be seen that the overall accuracy of the approximation method is improved by adopting the central difference approximation scheme compared to the forward Euler approximation scheme. For small-scale simulations with about 10,000 DOFs, the approximation schemes could reduce the CPU time substantially compared to the closed-form solution, due to the fact that fewer calculation steps are needed at each integration point. However, for a large-scale simulation with about 300,000 DOFs, the advantages of the approximation schemes diminish because the factorization of the stiffness matrix will dominate the solution time. Overall, as it is material model independent, the approximation method simplifies the FE implementation of a complex constitutive model with comparable accuracy and computational efficiency to the closed-form solution, which makes it attractive in FE simulations with complex material models.

Mechanical properties of resin glass fiber-reinforced abutment in comparison to titanium abutment

Purpose:

So far, definitive implant abutments have been performed with high elastic modulus materials, which prevented any type of shock absorption of the chewing loads and as a consequence, the protection of the bone-fixture interface. This is particularly the case when the esthetic restorative material chosen is ceramic rather than composite resin. The adoption of an anisotropic abutment, characterized by an elastic deformability, could allow decreasing the impulse of chewing forces transmitted to the crestal bone.

Materials and Methods:

According to research protocol, the mechanical resistance to cyclical load was evaluated in a tooth-colored fiber-reinforced abutment (TCFRA) prototype and compared to that of a titanium abutment (TA), thus eight TCFRAs and eight TAs were adhesively cemented on as many titanium implants. The swinging that the two types of abutments showed during the application of sinusoidal load was also analyzed.

Results:

In the TA group, both fracture and deformation occurred in 12.5% of samples while debonding 62.5%. In the TCFRA group, only debonding was present in 37.5% of samples. In comparison to the TAs, the TCFRAs exhibited a greater swinging during the application of sinusoidal load. In the TA group, the extrusion prevailed, whereas in the TCFRA group, the intrusion was more frequent.

Conclusion:

The greater elasticity of TCFRA to the flexural load allows absorbing part of the transversal load applied on the fixture during the chewing function, thus reducing the stress on the bone-implant interface.

Effect of Home Bleaching on Microleakage of Fiber-reinforced and Particle-filled Composite Resins

Background and aims. Bleaching may exert some negative effects on existing composite resin restorations. The aim of this study was to evaluate the effect of home bleaching on microleakage of fiber-reinforced and particle-filled composite resins.

Materials and methods. Ninety class V cavities (1.5×2×3 mm) were prepared on the buccal surfaces of 90 bovine teeth. The teeth were randomly divided into 6 groups (n=15) and restored as follows: Groups 1 and 2 with Z100, groups 3 and 4 with Z250, and groups 5 and 6 with Nulite F composite resins. All the specimens were thermocycled. Groups 1, 3 and 5 were selected as control groups (without bleaching) and the experimental groups 2, 4 and 6 were bleached with 22% carbamide peroxide gel. All the samples were immersed in 2% basic fuchsin dye for 24 hours and then sectioned longitudinally. Dye penetration was evaluated under a stereomicroscope (×25), at both the gingival and incisal margins. Data were analyzed using Kruskal-Wallis, Mann-Whitney and Wilcoxon tests (a=0.05).

Results. Statistical analyses revealed that bleaching gel increased microleakage only at gingival margins with Z250 (P=0.007). Moreover, the control groups showed a statistically significant difference in microleakage at their gingival margins. Nulite F had the maximum microleakage while Z250 showed the minimum (P=0.006).

Conclusion. Microleakage of home-bleached restorations might be related to the type of composite resin used.