Maintaining Biological Cultures and Measuring Gene Expression in Aphis nerii: A Non-model System for Plant-insect Interactions

Aphids are excellent experimental models for a variety of biological questions ranging from the evolution of symbioses and the development of polyphenisms to questions surrounding insect's interactions with their host plants. Genomic resources are available for several aphid species, and with advances in the next-generation sequencing, transcriptomic studies are being extended to non-model organisms that lack genomes. Furthermore, aphid cultures can be collected from the field and reared in the laboratory for the use in organismal and molecular experiments to bridge the gap between ecological and genetic studies. Last, many aphids can be maintained in the laboratory on their preferred host plants in perpetual, parthenogenic life cycles allowing for comparisons of asexually reproducing genotypes. Aphis nerii, the milkweed-oleander aphid, provides one such model to study insect interactions with toxic plants using both organismal and molecular experiments. Methods for the generation and maintenance of the plant and aphid cultures in the greenhouse and laboratory, DNA and RNA extractions, microsatellite analysis, de novo transcriptome assembly and annotation, transcriptome differential expression analysis, and qPCR verification of differentially expressed genes are outlined and discussed here.

Multiplex Therapeutic Drug Monitoring by Isotope-dilution HPLC-MS/MS of Antibiotics in Critical Illnesses

There is an ever-increasing demand for the therapeutic drug monitoring of antibiotics in many clinical facilities, particularly with regard to the implementation of hospital antibiotic stewardship programs. In the current work, we present a multiplex high-performance liquid chromatography-tandem mass spectrometry (HPCL-MS/MS) protocol for the quantification of cefepime, meropenem, ciprofloxacin, moxifloxacin, linezolid, and piperacillin, commonly used antibiotics in intensive care units. The method was previously comprehensively validated according to the guideline of the European Medicines Agency. After a rapid sample cleanup, the analytes are separated on a C8 reverse-phase HPLC column within 4 minutes and quantified with the corresponding stable isotope-labeled internal standards in electrospray ionization (ESI+) mass spectrometry in multiple reaction time monitoring (MRM). The presented method uses a simple instrumentation setting with uniform chromatographic conditions, allowing for the daily and robust antibiotic therapeutic drug monitoring in clinical laboratories. The calibration curve spans the pharmacokinetic concentration range, thereby including antibiotic amounts close to the minimal inhibitory concentration (MIC) of susceptible bacteria and peak concentrations (Cmax) that are obtained with bolus administration regimens. Without the necessity of the serum dilution before the sample cleanup, the area under the curve for an administered antibiotic can be obtained through multiple measurements.

Catalytic Scavenging of Plant Reactive Oxygen Species In Vivo by Anionic Cerium Oxide Nanoparticles

Reactive oxygen species (ROS) accumulation is a hallmark of plant abiotic stress response. ROS play a dual role in plants by acting as signaling molecules at low levels and damaging molecules at high levels. Accumulation of ROS in stressed plants can damage metabolites, enzymes, lipids, and DNA, causing a reduction of plant growth and yield. The ability of cerium oxide nanoparticles (nanoceria) to catalytically scavenge ROS in vivo provides a unique tool to understand and bioengineer plant abiotic stress tolerance. Here, we present a protocol to synthesize and characterize poly (acrylic) acid coated nanoceria (PNC), interface the nanoparticles with plants via leaf lamina infiltration, and monitor their distribution and ROS scavenging in vivo using confocal microscopy. Current molecular tools for manipulating ROS accumulation in plants are limited to model species and require laborious transformation methods. This protocol for in vivo ROS scavenging has the potential to be applied to wild type plants with broad leaves and leaf structure like Arabidopsis thaliana.

Endogenous Protein Tagging in Human Induced Pluripotent Stem Cells Using CRISPR/Cas9

A protocol is presented for generating human induced pluripotent stem cells (hiPSCs) that express endogenous proteins fused to in-frame N- or C-terminal fluorescent tags. The prokaryotic CRISPR/Cas9 system (clustered regularly interspaced short palindromic repeats/CRISPR-associated 9) may be used to introduce large exogenous sequences into genomic loci via homology directed repair (HDR). To achieve the desired knock-in, this protocol employs the ribonucleoprotein (RNP)-based approach where wild type Streptococcus pyogenes Cas9 protein, synthetic 2-part guide RNA (gRNA), and a donor template plasmid are delivered to the cells via electroporation. Putatively edited cells expressing the fluorescently tagged proteins are enriched by fluorescence activated cell sorting (FACS). Clonal lines are then generated and can be analyzed for precise editing outcomes. By introducing the fluorescent tag at the genomic locus of the gene of interest, the resulting subcellular localization and dynamics of the fusion protein can be studied under endogenous regulatory control, a key improvement over conventional overexpression systems. The use of hiPSCs as a model system for gene tagging provides the opportunity to study the tagged proteins in diploid, nontransformed cells. Since hiPSCs can be differentiated into multiple cell types, this approach provides the opportunity to create and study tagged proteins in a variety of isogenic cellular contexts.

A Flexible Low Cost Hydroponic System for Assessing Plant Responses to Small Molecules in Sterile Conditions

A wide range of studies in plant biology are performed using hydroponic cultures. In this work, an in vitro hydroponic growth system designed for assessing plant responses to chemicals and other substances of interest is presented. This system is highly efficient in obtaining homogeneous and healthy seedlings of the C3 and C4 model species Arabidopsis thaliana and Setaria viridis, respectively. The sterile cultivation avoids algae and microorganism contamination, which are known limiting factors for plant normal growth and development in hydroponics. In addition, this system is scalable, enabling the harvest of plant material on a large scale with minor mechanical damage, as well as the harvest of individual parts of a plant if desired. A detailed protocol demonstrating that this system has an easy and low-cost assembly, as it uses pipette racks as the main platform for growing plants, is provided. The feasibility of this system was validated using Arabidopsis seedlings to assess the effect of the drug AZD-8055, a chemical inhibitor of the target of rapamycin (TOR) kinase. TOR inhibition was efficiently detected as early as 30 min after an AZD-8055 treatment in roots and shoots. Furthermore, AZD-8055-treated plants displayed the expected starch-excess phenotype. We proposed this hydroponic system as an ideal method for plant researchers aiming to monitor the action of plant inducers or inhibitors, as well as to assess metabolic fluxes using isotope-labeling compounds which, in general, requires the use of expensive reagents.

Generation of Electronic Cigarette Aerosol by a Third-Generation Machine-Vaping Device: Application to Toxicological Studies

Electronic-cigarette (e-cig) devices use heat to produce an inhalable aerosol from a liquid (e-liquid) composed mainly of humectants, nicotine, and flavoring chemicals. The aerosol produced includes fine and ultrafine particles, and potentially nicotine and aldehydes, which can be harmful to human health. E-cig users inhale these aerosols and, with the third-generation of e-cig devices, control design features (resistance and voltage) in addition to the choice of e-liquids, and the puffing profile. These are key factors that can significantly impact the toxicity of the inhaled aerosols. E-cig research, however, is challenging and complex mostly due to the absence of standardized assessments and to the numerous varieties of e-cig models and brands, as well as e-liquid flavors and solvents that are available on the market. These considerations highlight the urgent need to harmonize e-cig research protocols, starting with e-cig aerosol generation and characterization techniques. The current study focuses on this challenge by describing a detailed step-by-step e-cig aerosol generation technique with specific experimental parameters that are thought to be realistic and representative of real-life exposure scenarios. The methodology is divided into four sections: preparation, exposure, post-exposure analysis, plus cleaning and maintenance of the device. Representative results from using two types of e-liquid and various voltages are presented in terms of mass concentration, particle size distribution, chemical composition and cotinine levels in mice. These data demonstrate the versatility of the e-cig exposure system used, aside from its value for toxicological studies, as it allows for a broad range of computer-controlled exposure scenarios, including automated representative vaping topography profiles.

Tick Microbiome Characterization by Next-Generation 16S rRNA Amplicon Sequencing

In recent decades, vector-borne diseases have re-emerged and expanded at alarming rates, causing considerable morbidity and mortality worldwide. Effective and widely available vaccines are lacking for a majority of these diseases, necessitating the development of novel disease mitigation strategies. To this end, a promising avenue of disease control involves targeting the vector microbiome, the community of microbes inhabiting the vector. The vector microbiome plays a pivotal role in pathogen dynamics, and manipulations of the microbiome have led to reduced vector abundance or pathogen transmission for a handful of vector-borne diseases. However, translating these findings into disease control applications requires a thorough understanding of vector microbial ecology, historically limited by insufficient technology in this field. The advent of next-generation sequencing approaches has enabled rapid, highly parallel sequencing of diverse microbial communities. Targeting the highly-conserved 16S rRNA gene has facilitated characterizations of microbes present within vectors under varying ecological and experimental conditions. This technique involves amplification of the 16S rRNA gene, sample barcoding via PCR, loading samples onto a flow cell for sequencing, and bioinformatics approaches to match sequence data with phylogenetic information. Species or genus-level identification for a high number of replicates can typically be achieved through this approach, thus circumventing challenges of low detection, resolution, and output from traditional culturing, microscopy, or histological staining techniques. Therefore, this method is well-suited for characterizing vector microbes under diverse conditions but cannot currently provide information on microbial function, location within the vector, or response to antibiotic treatment. Overall, 16S next-generation sequencing is a powerful technique for better understanding the identity and role of vector microbes in disease dynamics.

A Simplified and Efficient Method to Isolate Primary Human Keratinocytes from Adult Skin Tissue

Primary human keratinocytes isolated from fresh skin tissues and their expansion in vitro have been widely used for laboratory research and for clinical applications. The conventional isolation method of human keratinocytes involves a two-step sequential enzymatic digestion procedure, which has been proven to be inefficient in generating primary cells from adult tissues due to the low cell recovery rate and reduced cell viability. We recently reported an advanced method to isolate human primary epidermal progenitor cells from skin tissues that utilizes the Rho kinase inhibitor Y-27632 in the medium. Compared with the traditional protocol, this new method is simpler, easier, and less time-consuming, and increases epithelial stem cell yield and enhances their stem cell characteristics. Moreover, the new methodology does not require the separation of the epidermis from the dermis, and, therefore, is suitable for isolating cells from different types of adult tissues. This new isolation method overcomes the major shortcomings of conventional methods and is more suitable for producing large numbers of epidermal cells with high potency both for laboratory and for clinical applications. Here, we describe the new method in detail.

Hyaluronic-Acid Based Hydrogels for 3-Dimensional Culture of Patient-Derived Glioblastoma Cells

Glioblastoma (GBM) is the most common, yet most lethal, central nervous system cancer. In recent years, many studies have focused on how the extracellular matrix (ECM) of the unique brain environment, such as hyaluronic acid (HA), facilitates GBM progression and invasion. However, most in vitro culture models include GBM cells outside of the context of an ECM. Murine xenografts of GBM cells are used commonly as well. However, in vivo models make it difficult to isolate the contributions of individual features of the complex tumor microenvironment to tumor behavior. Here, we describe an HA hydrogel-based, three-dimensional (3D) culture platform that allows researchers to independently alter HA concentration and stiffness. High molecular weight HA and polyethylene glycol (PEG) comprise hydrogels, which are crosslinked via Michael-type addition in the presence of live cells. 3D hydrogel cultures of patient-derived GBM cells exhibit viability and proliferation rates as good as, or better than, when cultured as standard gliomaspheres. The hydrogel system also enables incorporation of ECM-mimetic peptides to isolate effects of specific cell-ECM interactions. Hydrogels are optically transparent so that live cells can be imaged in 3D culture. Finally, HA hydrogel cultures are compatible with standard techniques for molecular and cellular analyses, including PCR, Western blotting and cryosectioning followed by immunofluorescence staining.

Designing CAD/CAM Surgical Guides for Maxillary Reconstruction Using an In-house Approach

Computer-aided design/computer-assisted manufacturing (CAD/CAM) is now being evaluated as a preparative technique for maxillofacial surgery. Because this technique is expensive and available in only limited areas of the world, we developed a novel CAD/CAM surgical guide using an in-house approach. By using the CAD software, the maxillary resection area and cutting planes and the fibular cutting planes and angles are determined. Once the resection area is decided, the necessary faces are extracted using a Boolean modifier. These superficial faces are united to fit the surface of the bones and thickened to stabilize the solids. Not only the cutting guides for the fibula and maxilla but also the location arrangement of the transferred bone segments is defined by thickening the superficial faces. The CAD design is recorded as .stl files and three-dimensionally (3-D) printed as actual surgical guides. To check the accuracy of the guides, model surgery using 3-D-printed facial and fibular models is performed. These methods may be used to assist surgeons where commercial guides are not available.

Complete and Partial Aortic Occlusion for the Treatment of Hemorrhagic Shock in Swine

Hemorrhage remains the leading cause of preventable deaths in trauma. Endovascular management of non-compressible torso hemorrhage has been at the forefront of trauma care in recent years. Since complete aortic occlusion presents serious concerns, the concept of partial aortic occlusion has gained a growing attention. Here, we present a large animal model of hemorrhagic shock to investigate the effects of a novel partial aortic balloon occlusion catheter and compare it with a catheter that works on the principles of complete aortic occlusion. Swine are anesthetized and instrumented in order to conduct controlled fixed-volume hemorrhage, and hemodynamic and physiological parameters are monitored. Following hemorrhage, aortic balloon occlusion catheters are inserted and inflated in the supraceliac aorta for 60 min, during which the animals receive whole-blood resuscitation as 20% of the total blood volume (TBV). Following balloon deflation, the animals are monitored in a critical care setting for 4 h, during which they receive fluid resuscitation and vasopressors as needed. The partial aortic balloon occlusion demonstrated improved distal mean arterial pressures (MAPs) during the balloon inflation, decreased markers of ischemia, and decreased fluid resuscitation and vasopressor use. As swine physiology and homeostatic responses following hemorrhage have been well-documented and are like those in humans, a swine hemorrhagic shock model can be used to test various treatment strategies. In addition to treating hemorrhage, aortic balloon occlusion catheters have become popular for their role in cardiac arrest, cardiac and vascular surgery, and other high-risk elective surgical procedures.

Detection of Viruses from Bioaerosols Using Anion Exchange Resin

This protocol demonstrates a customized bioaerosol sampling method for viruses. In this system, anion exchange resin is coupled with liquid impingement-based air sampling devices for efficacious concentration of negatively-charged viruses from bioaerosols. Thus, the resin serves as an additional concentration step in the bioaerosol sampling workflow. Nucleic acid extraction of the viral particles is then performed directly from the anion exchange resin, with the resulting sample suitable for molecular analyses. Further, this protocol describes a custom-built bioaerosol chamber capable of generating virus-laden bioaerosols under a variety of environmental conditions and allowing for continuous monitoring of environmental variables such as temperature, humidity, wind speed, and aerosol mass concentration. The main advantage of using this protocol is increased sensitivity of viral detection, as assessed via direct comparison to an unmodified conventional liquid impinger. Other advantages include the potential to concentrate diverse negatively-charged viruses, the low cost of anion exchange resin (~$0.14 per sample), and ease of use. Disadvantages include the inability of this protocol to assess infectivity of resin-adsorbed viral particles, and potentially the need for the optimization of the liquid sampling buffer used within the impinger.

Agarose-based Tissue Mimicking Optical Phantoms for Diffuse Reflectance Spectroscopy

This protocol describes how to make agarose-based tissue-mimicking phantoms and demonstrates how to determine their optical properties using a conventional optical system with an integrating sphere. Measuring systems for the acquisition of the diffuse reflectance and total transmittance spectra are constructed with a broadband white light source, a light guide, an achromatic lens, an integrating sphere, a sample holder, an optical fiber probe, and a multi-channel spectrometer. An acrylic mold consisting of two rectangular acrylic pieces and a U-shaped acrylic piece is constructed to create an epidermal phantom and a dermal phantom with whole blood. The application of a sodium dithionite (Na2S2O4) solution to the dermal phantom enables the researcher to deoxygenate hemoglobin in red blood cells distributed in the dermal phantom. The inverse Monte Carlo simulation with the diffuse reflectance and total transmittance spectra measured by a spectrometer with an integrating sphere is performed to determine the absorption coefficient spectrum µa(λ) and the reduced scattering coefficient spectrum µs'(λ) of each layer phantom. A two-layered phantom mimicking the diffuse reflectance of human skin tissue is also demonstrated by piling up the epidermal phantom on the dermal phantom.

Synthesis and Characterization of 1,2-Dithiolane Modified Self-Assembling Peptides

This report focuses on the synthesis of an N-terminus 1,2-dithiolane modified self-assembling peptide and the characterization of the resulting self-assembled supramolecular structures. The synthetic route takes advantage of solid-phase peptide synthesis with the on-resin coupling of the dithiolane precursor molecule, 3-(acetylthio)-2-(acetylthiomethyl)propanoic acid, and the microwave-assisted thioacetate deprotection of the peptide N-terminus before final cleavage from the resin to yield the 1,2-dithiolane modified peptide. After the high-performance liquid chromatography (HPLC) purification of the 1,2-dithiolane peptide, derived from the nucleating core of the Aβ peptide associated with Alzheimer's disease, the peptide is shown to self-assemble into cross-β amyloid fibers. Protocols to characterize the amyloid fibers by Fourier-transform infrared spectroscopy (FT-IR), circular dichroism spectroscopy (CD) and transmission electron microscopy (TEM) are presented. The methods of N-terminal modification with a 1,2-dithiolane moiety to well-characterized self-assembling peptides can now be explored as model systems to develop post-assembly modification strategies and explore dynamic covalent chemistry on supramolecular peptide nanofiber surfaces.

Rodent Behavioral Testing to Assess Functional Deficits Caused by Microelectrode Implantation in the Rat Motor Cortex

Medical devices implanted in the brain hold tremendous potential. As part of a Brain Machine Interface (BMI) system, intracortical microelectrodes demonstrate the ability to record action potentials from individual or small groups of neurons. Such recorded signals have successfully been used to allow patients to interface with or control computers, robotic limbs, and their own limbs. However, previous animal studies have shown that a microelectrode implantation in the brain not only damages the surrounding tissue but can also result in functional deficits. Here, we discuss a series of behavioral tests to quantify potential motor impairments following the implantation of intracortical microelectrodes into the motor cortex of a rat. The methods for open field grid, ladder crossing, and grip strength testing provide valuable information regarding the potential complications resulting from a microelectrode implantation. The results of the behavioral testing are correlated with endpoint histology, providing additional information on the pathological outcomes and impacts of this procedure on the adjacent tissue.

Culture and Transfection of Zebrafish Primary Cells

Zebrafish embryos are transparent and develop rapidly outside the mother, thus allowing for excellent in vivo imaging of dynamic biological processes in an intact and developing vertebrate. However, the detailed imaging of the morphologies of distinct cell types and subcellular structures is limited in whole mounts. Therefore, we established an efficient and easy-to-use protocol to culture live primary cells from zebrafish embryos and adult tissue. In brief, 2 dpf zebrafish embryos are dechorionated, deyolked, sterilized, and dissociated to single cells with collagenase. After a filtration step, primary cells are plated onto glass bottom dishes and cultivated for several days. Fresh cultures, as much as long term differenciated ones, can be used for high resolution confocal imaging studies. The culture contains different cell types, with striated myocytes and neurons being prominent on poly-L-lysine coating. To specifically label subcellular structures by fluorescent marker proteins, we also established an electroporation protocol which allows the transfection of plasmid DNA into different cell types, including neurons. Thus, in the presence of operator defined stimuli, complex cell behavior, and intracellular dynamics of primary zebrafish cells can be assessed with high spatial and temporal resolution. In addition, by using adult zebrafish brain, we demonstrate that the described dissociation technique, as well as the basic culturing conditions, also work for adult zebrafish tissue.

Imaging Cell Interaction in Tracheal Mucosa During Influenza Virus Infection Using Two-photon Intravital Microscopy

The analysis of cell-cell or cell-pathogen interaction in vivo is an important tool to understand the dynamics of the immune response to infection. Two-photon intravital microscopy (2P-IVM) allows the observation of cell interactions in deep tissue in living animals, while minimizing the photobleaching generated during image acquisition. To date, different models for 2P-IVM of lymphoid and non-lymphoid organs have been described. However, imaging of respiratory organs remains a challenge due to the movement associated with the breathing cycle of the animal. Here, we describe a protocol to visualize in vivo immune cell interactions in the trachea of mice infected with influenza virus using 2P-IVM. To this purpose, we developed a custom imaging platform, which included the surgical exposure and intubation of the trachea, followed by the acquisition of dynamic images of neutrophils and dendritic cells (DC) in the mucosal epithelium. Additionally, we detailed the steps needed to perform influenza intranasal infection and flow cytometric analysis of immune cells in the trachea. Finally, we analyzed neutrophil and DC motility as well as their interactions during the course of a movie. This protocol allows for the generation of stable and bright 4D images necessary for the assessment of cell-cell interactions in the trachea.

Combined Transcranial Magnetic Stimulation and Electroencephalography of the Dorsolateral Prefrontal Cortex

Transcranial magnetic stimulation (TMS) is a non-invasive method that produces neural excitation in the cortex by means of brief, time-varying magnetic field pulses. The initiation of cortical activation or its modulation depends on the background activation of the neurons of the cortical region activated, the characteristics of the coil, its position and its orientation with respect to the head. TMS combined with simultaneous electrocephalography (EEG) and neuronavigation (nTMS-EEG) allows for the assessment of cortico-cortical excitability and connectivity in almost all cortical areas in a reproducible manner. This advance makes nTMS-EEG a powerful tool that can accurately assess brain dynamics and neurophysiology in test-retest paradigms that are required for clinical trials. Limitations of this method include artifacts that cover the initial brain reactivity to stimulation. Thus, the process of removing artifacts may also extract valuable information. Moreover, the optimal parameters for dorsolateral prefrontal (DLPFC) stimulation are not fully known and current protocols utilize variations from the motor cortex (M1) stimulation paradigms. However, evolving nTMS-EEG designs hope to address these issues. The protocol presented here introduces some standard practices for assessing neurophysiological functioning from stimulation to the DLPFC that can be applied in patients with treatment resistant psychiatric disorders that receive treatment such as transcranial direct current stimulation (tDCS), repetitive transcranial magnetic stimulation (rTMS), magnetic seizure therapy (MST) or electroconvulsive therapy (ECT).

Healthy Brain-pituitary Slices for Electrophysiological Investigations of Pituitary Cells in Teleost Fish

Electrophysiological investigations of pituitary cells have been conducted in numerous vertebrate species, but very few in teleost fish. Among these, the clear majority have been performed on dissociated primary cells. To improve our understanding of how teleost pituitary cells, behave in a more biologically relevant environment, this protocol shows how to prepare viable brain-pituitary slices using the small freshwater fish medaka (Oryzias latipes). Making the brain-pituitary slices, pH and osmolality of all solutions were adjusted to values found in body fluids of freshwater fish living at 25 to 28 °C. Following slice preparation, the protocol demonstrates how to conduct electrophysiological recordings using the perforated whole-cell patch-clamp technique. The patch-clamp technique is a powerful tool with unprecedented temporal resolution and sensitivity, allowing investigation of electrical properties from intact whole cells down to single ion channels. Perforated patch is unique in that it keeps the intracellular environment intact preventing regulatory elements in the cytosol from being diluted by the patch pipette electrode solution. In contrast, when performing traditional whole-cell recordings, it was observed that medaka pituitary cells quickly lose their ability to fire action potentials. Among the various perforation techniques available, this protocol demonstrates how to achieve perforation of the patched membrane using the fungicide Amphotericin B.

A Two-Step Protocol for Umpolung Functionalization of Ketones Via Enolonium Species

α-Functionalization of ketones via umpolung of enolates by hypervalent iodine reagents is an important concept in synthetic organic chemistry. Recently, we have developed a two-step strategy for ketone enolate umpolung that has enabled the development of methods for chlorination, azidation, and amination using azoles. In addition, we have developed C-C bond-forming arylation and allylation reactions. At the heart of these methods is the preparation of the intermediate and highly reactive enolonium species prior to addition of a reactive nucleophile. This strategy is thus reminiscent of the preparation and use of metal enolates in classical synthetic chemistry. This strategy allows the use of nucleophiles that would otherwise be incompatible with the strongly oxidizing hypervalent iodine reagents. In this paper we present a detailed protocol for chlorination, azidation, N-heteroarylation, arylation, and allylation. The products include motifs prevalent in medicinally active products. This article will greatly assist others in using these methods.

Transient Expression in Nicotiana Benthamiana Leaves for Triterpene Production at a Preparative Scale

The triterpenes are one of the largest and most structurally diverse families of plant natural products. Many triterpene derivatives have been shown to possess medicinally relevant biological activity. However, thus far this potential has not translated into a plethora of triterpene-derived drugs in the clinic. This is arguably (at least partially) a consequence of limited practical synthetic access to this class of compound, a problem that can stifle the exploration of structure-activity relationships and development of lead candidates by traditional medicinal chemistry workflows. Despite their immense diversity, triterpenes are all derived from a single linear precursor, 2,3-oxidosqualene. Transient heterologous expression of biosynthetic enzymes in N. benthamiana can divert endogenous supplies of 2,3-oxidosqualene towards the production of new high-value triterpene products that are not naturally produced by this host. Agro-infiltration is an efficient and simple means of achieving transient expression in N. benthamiana. The process involves infiltration of plant leaves with a suspension of Agrobacterium tumefaciens carrying the expression construct(s) of interest. Co-infiltration of an additional A. tumefaciens strain carrying an expression construct encoding an enzyme that boosts precursor supply significantly increases yields. After a period of five days, the infiltrated leaf material can be harvested and processed to extract and isolate the resulting triterpene product(s). This is a process that is linearly and reliably scalable, simply by increasing the number of plants used in the experiment. Herein is described a protocol for rapid preparative-scale production of triterpenes utilizing this plant-based platform. The protocol utilizes an easily replicable vacuum infiltration apparatus, which allows the simultaneous infiltration of up to four plants, enabling batch-wise infiltration of hundreds of plants in a short period of time.

The Generation of Closed Femoral Fractures in Mice: A Model to Study Bone Healing

Bone fractures impose a tremendous socio-economic burden on patients, in addition to significantly affecting their quality of life. Therapeutic strategies that promote efficient bone healing are non-existent and in high demand. Effective and reproducible animal models of fractures healing are needed to understand the complex biological processes associated with bone regeneration. Many animal models of fracture healing have been generated over the years; however, murine fracture models have recently emerged as powerful tools to study bone healing. A variety of open and closed models have been developed, but the closed femoral fracture model stands out as a simple method for generating rapid and reproducible results in a physiologically relevant manner. The goal of this surgical protocol is to generate unilateral closed femoral fractures in mice and facilitate a post-fracture stabilization of the femur by inserting an intramedullary steel rod. Although devices such as a nail or a screw offer greater axial and rotational stability, the use of an intramedullary rod provides a sufficient stabilization for consistent healing outcomes without producing new defects in the bone tissue or damaging nearby soft tissue. Radiographic imaging is used to monitor the progression of callus formation, bony union, and subsequent remodeling of the bony callus. Bone healing outcomes are typically associated with the strength of the healed bone and measured with torsional testing. Still, understanding the early cellular and molecular events associated with fracture repair is critical in the study of bone tissue regeneration. The closed femoral fracture model in mice with intramedullary fixation serves as an attractive platform to study bone fracture healing and evaluate therapeutic strategies to accelerate healing.

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications

Several ways to produce superhydrophobic metal surfaces are presented in this work. Aluminum was chosen as the metal substrate due to its wide use in industry. The wettability of the produced surface was analyzed by bouncing drop experiments and the topography was analyzed by confocal microscopy. In addition, we show various methodologies to measure its durability and anti-icing properties. Superhydrophobic surfaces hold a special texture that must be preserved to keep their water-repellency. To fabricate durable surfaces, we followed two strategies to incorporate a resistant texture. The first strategy is a direct incorporation of roughness to the metal substrate by acid etching. After this surface texturization, the surface energy was decreased by silanization or fluoropolymer deposition. The second strategy is the growth of a ceria layer (after surface texturization) that should enhance the surface hardness and corrosion resistance. The surface energy was decreased with a stearic acid film. The durability of the superhydrophobic surfaces was examined by a particle impact test, mechanical wear by lateral abrasion, and UV-ozone resistance. The anti-icing properties were explored by studying the ability to repeal subcooled water, freezing delay, and ice adhesion.

Using Phylogenetic Analysis to Investigate Eukaryotic Gene Origin

Phylogenetic analysis uses nucleotide or amino acid sequences or other parameters, such as domain sequences and three-dimensional structure, to construct a tree to show the evolutionary relationship among different taxa (classification units) at the molecular level. Phylogenetic analysis can also be used to investigate domain relationships within an individual taxon, particularly for organisms that have undergone substantial change in morphology and physiology, but for which researchers lack fossil evidence due to the organisms' long evolutionary history or scarcity of fossilization. In this text, a detailed protocol is described for using the phylogenetic method, including amino acid sequence alignment using Clustal Omega, and subsequent phylogenetic tree construction using both Maximum Likelihood (ML) of Molecular Evolutionary Genetics Analysis (MEGA) and Bayesian Inference via MrBayes. To investigate the origin of eukaryotic Sugars Will Eventually be Exported Transporters (SWEET) genes, 228 SWEETs including 35 SWEET proteins from unicellular eukaryotes and 57 SemiSWEET proteins from prokaryotes were analyzed. Interestingly, SemiSWEETs were found in prokaryotes, but SWEETs were found in eukaryotes. Two phylogenetic trees constructed using theoretically distinct methods have consistently suggested that the first eukaryotic SWEET gene might stem from the fusion of a bacterial SemiSWEET gene and an archaeal SemiSWEET gene. It is worth noting that one should be cautious to draw a conclusion based only on phylogenetic analysis, although it is useful to explain the underlying relationship between different taxa, which is difficult or even impossible to discern through experimental means.

A High-throughput Cre-Lox Activated Viral Membrane Fusion Assay to Identify Inhibitors of HIV-1 Viral Membrane Fusion

This assay is designed to specifically report on HIV-1 fusion via the expression of green fluorescent protein (GFP) detectable by flow cytometry or fluorescence microscopy. An HIV-1 reporter virus (HIV-1 Gag-iCre) is generated by inserting Cre recombinase into the HIV-1 genome between the matrix and the capsid proteins of the Gag polyprotein. This results in a packaging of Cre recombinase into virus particles, which is then released into a target cell line stably expressing a Cre recombinase-activated red fluorescent protein (RFP) to GFP switch cassette. In the basal state, this cassette expresses RFP only. Following the delivery of Cre recombinase into the target cell, the RFP, flanked by loxP sites, excises, resulting in GFP expression. This assay can be used to test any inhibitors of viral entry (specifically at the fusion step) in cell-free and cell-to-cell infection systems and has been used to identify a class of purinergic receptor antagonists as novel inhibitors of HIV-1 viral membrane fusion.

Production and Visualization of Bacterial Spheroplasts and Protoplasts to Characterize Antimicrobial Peptide Localization

The use of confocal microscopy as a method to assess peptide localization patterns within bacteria is commonly inhibited by the resolution limits of conventional light microscopes. As the resolution for a given microscope cannot be easily enhanced, we present protocols to transform the small rod-shaped gram-negative Escherichia coli (E. coli) and gram-positive Bacillus megaterium (B. megaterium) into larger, easily imaged spherical forms called spheroplasts or protoplasts. This transformation allows observers to rapidly and clearly determine whether peptides lodge themselves into the bacterial membrane (i.e., membrane localizing) or cross the membrane to enter the cell (i.e., translocating). With this approach, we also present a systematic method to characterize peptides as membrane localizing or translocating. While this method can be used for a variety of membrane-active peptides and bacterial strains, we demonstrate the utility of this protocol by observing the interaction of Buforin II P11A (BF2 P11A), an antimicrobial peptide (AMP), with E. coli spheroplasts and B. megaterium protoplasts.

Magnetic-Activated Cell Sorting Strategies to Isolate and Purify Synovial Fluid-Derived Mesenchymal Stem Cells from a Rabbit Model

Mesenchymal stem cells (MSCs) are the main cell source for cell-based therapy. MSCs from articular cavity synovial fluid could potentially be used for cartilage tissue engineering. MSCs from synovial fluid (SF-MSCs) have been considered promising candidates for articular regeneration, and their potential therapeutic benefit has made them an important research topic of late. SF-MSCs from the knee cavity of the New Zealand white rabbit can be employed as an optimized translational model to assess human regenerative medicine. By means of CD90-based magnetic activated cell sorting (MACS) technologies, this protocol successfully obtains rabbit SF-MSCs (rbSF-MSCs) from this rabbit model and further fully demonstrates the MSC phenotype of these cells by inducing them to differentiate to osteoblasts, adipocytes, and chondrocytes. Therefore, this approach can be applied in cell biology research and tissue engineering using simple equipment and procedures.

Generation of Large Numbers of Myeloid Progenitors and Dendritic Cell Precursors from Murine Bone Marrow Using a Novel Cell Sorting Strategy

Cultures of monocyte-derived dendritic cells (moDC) generated from mouse bone marrow using Granulocyte-Macrophage Colony Stimulating Factor (GM-CSF) have recently been recognized to be more heterogeneous than previously appreciated. These cultures routinely contain moDC as well monocyte-derived macrophages (moMac), and even some less developed cells such as monocytes. The goal of this protocol is to provide a consistent method for identification and separation of the many cell types present in these cultures as they develop, so that their specific functions may be further investigated. The sorting strategy presented here separates cells first into four populations based on expression of Ly6C and CD115, both of which are expressed transiently by cells as they develop in GM-CSF-driven culture. These four populations include Common myeloid progenitors or CMP (Ly6C-, CD115-), granulocyte/macrophage progenitors or GMP (Ly6C+, CD115-), monocytes (Ly6C+, CD115+), and monocyte-derived macrophages or moMac (Ly6C-, CD115+). CD11c is also added to the sorting strategy to distinguish two populations within the Ly6C-, CD115- population: CMP (CD11c-) and moDC (CD11c+). Finally, two populations may be further distinguished within the Ly6C-, CD115+ population based on the level of MHC class II expression. MoMacs express lower levels of MHC class II, while a monocyte-derived DC precursor (moDP) expresses higher MHC class II. This method allows for the reliable isolation of several developmentally distinct populations in numbers sufficient for a variety of functional and developmental analyses. We highlight one such functional readout, the differential responses of these cell types to stimulation with Pathogen-Associated Molecular Patterns (PAMPs).

A Mobile Outside-in Technique of Transforaminal Lumbar Endoscopy for Lumbar Disc Herniations

Percutaneous endoscopic transforaminal lumbar discectomy (PETLD) has now become a standard of care for the management of lumbar disc disease. There are two techniques for the introduction of a working cannula with respect to disc-outside-in and inside-out. The aim of this prospective study is to describe the technical aspects of a novel mobile outside-in method in dealing with different types of disc prolapse. A total of 184 consecutive patients with unilateral lower limb radiculopathy due to lumbar disc prolapse were operated on with the mobile outside-in technique of PETLD. Their clinical outcomes were evaluated based on the type of disc prolapse they had, a visual analog scale (VAS) leg pain score, the Oswestry Disability Index (ODI), and the Macnab criteria. The completeness of the decompression was documented with a postoperative magnetic resonance imaging. The mean age of the patients was 50 ± 16 years and the male/female ratio was 2:1. The mean follow-up was 19 ± 6 months. A total of 190 lumbar levels were operated on (L1-L2: n = 4, L2-L3: n = 17, L3-L4: n = 27, L4-5: n = 123, and L5-S1: n = 19). Divided into types, the patient distribution was central: n = 14, paracentral: n = 74, foraminal: n = 28, far lateral: n = 13, superior-migrated: n = 8, inferior migrated: n = 38, and high canal compromise: n = 9. The mean operative time was 35 ± 12 (25 - 56) min and the mean hospital stay was 1.2 ± 0.5 (1-3) days. The VAS score for leg pain improved from 7.5 ± 1 to 1.7 ± 0.9. The ODI improved from 70 ± 8.3 to 23 ± 5. According to the Macnab criteria, 75 patients (40.8%) had excellent results, 104 patients (56.5%) had good results, and 5 patients (2.7%) had fair results. Recurrence (including early and late) was seen in 15 out of the 190 levels that were operated on (7.89%). This article presents a novel outside-in approach that relies on a precise landing within the foramen in a mobile manner and does not solely depend upon the enlargement of the foramen. It is more versatile in application and useful in the management of all types of disc prolapse, even in severe canal compromise and high migration.

The Plant Infection Test: Spray and Wound-Mediated Inoculation with the Plant Pathogen Magnaporthe Grisea

Plants possess a powerful system to defend themselves against potential threats by pathogenic fungi. For agriculturally important plants, however, current measures to combat such pathogens have proved too conservative and, thus, not sufficiently effective, and they can potentially pose environmental risks. Therefore, it is extremely necessary to identify host-resistance factors to assist in controlling plant diseases naturally through the identification of resistant germplasm, the isolation and characterization of resistance genes, and the molecular breeding of resistant cultivars. In this regard, there is need to establish an accurate, rapid, and large-scale inoculation method to breed and develop plant resistance genes. The rice blast fungal pathogen Magnaporthe grisea causes severe disease symptoms and yield losses. Recently, M. grisea has emerged as a model organism for studying the mechanisms of plant-fungal pathogen interactions. Hence, we report the development of a plant virulence test method that is specific for M. grisea. This method provides for both spray inoculation with a conidial suspension and wounding inoculation with mycelium cubes or droplets of conidial suspension. The key step of the wounding inoculation method for detached rice leaves is to make wounds on plant leaves, which avoids any interference caused by host penetration resistance. This spray/wounding protocol contributes to the rapid, accurate, and large-scale screening of the pathotypes of M. grisea isolates. This integrated and systematic plant infection method will serve as an excellent starting point for gaining a broad perspective of issues in plant pathology.

Antimicrobial Characterization of Advanced Materials for Bioengineering Applications

The development of new advanced materials with enhanced properties is becoming more and more important in a wide range of bioengineering applications. Thus, many novel biomaterials are being designed to mimic specific environments required for biomedical applications such as tissue engineering and controlled drug delivery. The development of materials with improved properties for the immobilization of cells or enzymes is also a current research topic in bioprocess engineering. However, one of the most desirable properties of a material in these applications is the antimicrobial capacity to avoid any undesirable infections. For this, we present easy-to-follow protocols for the antimicrobial characterization of materials based on (i) the agar disk diffusion test (diffusion method) and (ii) the ISO 22196:2007 norm to measure the antimicrobial activity on material surfaces (contact method). This protocol must be performed using Gram-positive and Gram-negative bacteria and yeast to cover a broad range of microorganisms. As an example, 4 materials with different chemical natures are tested following this protocol against Staphylococcus aureus, Escherichia coli, and Candida albicans.The results of these tests exhibit non-antimicrobial activity for the first material and increasing antibacterial activity against Gram-positive and Gram-negative bacteria for the other 3 materials. However, none of the 4 materials are able to inhibit the growth of Candida albicans.

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

The purpose of this paper is to present the method of a soft tooling process chain employing Additive Manufacturing (AM) for fabrication of injection molding inserts with micro surface features. The Soft Tooling inserts are manufactured by Digital Light Processing (vat photo polymerization) using a photopolymer that can withstand relatively high temperaturea. The part manufactured here has four tines with an angle of 60°. Micro pillars (Ø200 µm, aspect ratio of 1) are arranged on the surfaces by two rows. Polyethylene (PE) injection molding with the soft tooling inserts is used to fabricate the final parts. This method demonstrates that it is feasible to obtain injection-molded parts with microstructures on complex geometry by additive manufactured inserts. The machining time and cost is reduced significantly compared to conventional tooling processes based on computer numerical control (CNC) machining. The dimensions of the micro features are influenced by the applied additive manufacturing process. The lifetime of the inserts determines that this process is more suitable for pilot production. The precision of the inserts production is limited by the additive manufacturing process as well.

Automated, Long-term Behavioral Assay for Cognitive Functions in Multiple Genetic Models of Alzheimer's Disease, Using IntelliCage

Multiple factors-such as aging and genes-are frequently associated with cognitive decline. Genetically modified mouse models of cognitive decline, such as Alzheimer's disease (AD), have become a promising tool to elucidate the underlying mechanisms and promote the therapeutic advances. An important step is the validation and characterization of expected behavioral abnormality in the models, in the case of AD, cognitive decline. The long-term behavioral investigations of laboratory animals to study the effect of aging demand substantial efforts from researchers. The IntelliCage system is a high-throughput and cost-effective test battery for mice that eliminates the need for daily human handling. Here, we describe how the system is utilized in the long-term phenotyping of a genetic Alzheimer's disease model, specifically focusing on the cognitive functions. The experiment employs repeated battery of tests that assess spatial learning and executive functions. This cost-effective age-dependent phenotyping allows us to identify the transient and/or permanent effects of genes on various cognitive aspects.

Molecular Analysis of Endothelial-mesenchymal Transition Induced by Transforming Growth Factor-β Signaling

Phenotypic plasticity of endothelial cells underlies cardiovascular system development, cardiovascular diseases, and various conditions associated with organ fibrosis. In these conditions, differentiated endothelial cells acquire mesenchymal-like phenotypes. This process is called endothelial-mesenchymal transition (EndMT) and is characterized by downregulation of endothelial markers, upregulation of mesenchymal markers, and morphological changes. EndMT is induced by several signaling pathways, including transforming growth factor (TGF)-β, Wnt, and Notch, and regulated by molecular mechanisms similar to those of epithelial-mesenchymal transition (EMT) important for gastrulation, tissue fibrosis, and cancer metastasis. Understanding the mechanisms of EndMT is important to develop diagnostic and therapeutic approaches targeting EndMT. Robust induction of EndMT in vitro is useful to characterize common gene expression signatures, identify druggable molecular mechanisms, and screen for modulators of EndMT. Here, we describe an in vitro method for induction of EndMT. MS-1 mouse pancreatic microvascular endothelial cells undergo EndMT after prolonged exposure to TGF-β and show upregulation of mesenchymal markers and morphological changes as well as induction of multiple inflammatory chemokines and cytokines. Methods for the analysis of microRNA (miRNA) modulation are also included. These methods provide a platform to investigate mechanisms underlying EndMT and the contribution of miRNAs to EndMT.

Confocal Microscopy Reveals Cell Surface Receptor Aggregation Through Image Correlation Spectroscopy

Confocal microscopy provides an accessible methodology to capture sub-cellular interactions critical for the characterization and further development of pre-clinical agents labeled with fluorescent probes. With recent advancements in antibody based cytotoxic drug delivery systems, understanding the alterations induced by these agents within the realm of receptor aggregation and internalization is of critical importance. This protocol leverages the well-established methodology of fluorescent immunocytochemistry and the open source FIJI distribution of ImageJ, with its inbuilt autocorrelation and image mathematical functions, to perform spatial image correlation spectroscopy (ICS). This protocol quantitates the fluorescent intensity of labeled receptors as a function of the beam area of the confocal microscope. This provides a quantitative measure of the state of target molecule aggregation on the cell surface. This methodology is focused on the characterization of static cells with potential to expand into temporal investigations of receptor aggregation. This protocol presents an accessible methodology to provide quantification of clustering events occurring at the cell surface, utilizing well established techniques and non-specialized imaging apparatus.

Preparation of Functional Silica Using a Bioinspired Method

The goal of the protocols described herein is to synthesize bioinspired silica materials, perform enzyme encapsulation therein, and partially or totally purify the same by acid elution. By combining sodium silicate with a polyfunctional bioinspired additive, silica is rapidly formed at ambient conditions upon neutralization. The effect of neutralization rate and biomolecule addition point on silica yield are investigated, and biomolecule immobilization efficiency is reported for varying addition point. In contrast to other porous silica synthesis methods, it is shown that the mild conditions required for bioinspired silica synthesis are fully compatible with the encapsulation of delicate biomolecules. Additionally, mild conditions are used across all synthesis and modification steps, making bioinspired silica a promising target for the scale-up and commercialization as both a bare material and active support medium. The synthesis is shown to be highly sensitive to conditions, i.e., the neutralization rate and final synthesis pH, however tight control over these parameters is demonstrated through the use of auto titration methods, leading to high reproducibility in reaction progression pathway and yield. Therefore, bioinspired silica is an excellent active material support choice, showing versatility towards many current applications, not limited to those demonstrated here, and potency in future applications.

Identification of Pharmaceuticals in The Aquatic Environment Using HPLC-ESI-Q-TOF-MS and Elimination of Erythromycin Through Photo-Induced Degradation

Monitoring pharmaceuticals throughout the water cycle is becoming increasingly important for the aquatic environment and eventually for human health. Targeted and non-targeted analysis are today's means of choice. Although targeted analysis usually conducted with the help of a triple quadrupole mass spectrometer may be more sensitive, only compounds previously selected can be identified. The most powerful non-targeted analysis is performed through time of flight mass spectrometers (TOF-MS) extended by a quadrupole mass analyzer (Q), as used in this study. Preceded by solid phase extraction and high-performance liquid chromatography (HPLC), the non-targeted approach allows to detect all ionizable substances with high sensitivity and selectivity. Taking full advantage of the Q-TOF-MS instrument, tandem mass spectrometry (MS/MS) experiments accelerate and facilitate the identification while a targeted MS method enhances the sensitivity but relies on reference standards for identification purposes. The identification of four pharmaceuticals from Rhine river water is demonstrated. The Rhine river originates in Tomasee, Graubünden, Switzerland and flows into the North Sea, near Southern Bight, The Netherlands. Its length amounts to 1232.7 km. Since it is of prime interest to effectively eliminate pharmaceuticals from the water cycle, the effect UV-C irradiation is demonstrated on a laboratory scale. This method allows fast degradation of pharmaceuticals, which is exemplarily shown for the macrolide antibiotic erythromycin. Using the above HPLC-Q-TOF-MS method, concentration-time diagrams are obtained for the parent drug and their photodegradation products. After establishing the equations for first-order sequential reactions, computational fitting allows the determination of kinetic parameters, which might help to predict irradiation times and conditions when potentially considered as fourth stage within wastewater treatment.