1
|
Gourmelon A, Hubert P, Grignard E, Baumann L, Munn S, Michel C. The benefits of validation of methods for toxicity testing outweigh its costs. ALTEX 2024. [PMID: 38501278 DOI: 10.14573/altex.2403051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2024] [Accepted: 03/13/2024] [Indexed: 03/20/2024]
Abstract
The 4th Annual Forum on Endocrine Disrupters organized by the European Commission brought together authors of this article around the topic: "From bench to validated test guidelines: (pre)validation of test methods". Validation activities are meant to demonstrate the relevance and reliability of methods and approaches used in regulatory safety testing. These activities are essential to facilitate regulatory use, still they are largely underfunded and unattractive to the scientific community. In the last decade, there has been large amounts of funding invested in European research towards the development of approaches that can be used in regulatory decision-making, including for the identification of endocrine disrupters. There is a vast pool of candidate test methods for potential regulatory applications, but most of them will not be used due to the absence of consideration of their relevance and reliability outside the method developer's laboratory. The article explains the reasons why such a gap exists between the outputs of research projects and the uptake in a regulatory context. In parallel, there are also increasing expectations from the regulatory science community that validation becomes more efficient with respect to time and resources. This article shares some of the lessons learned and proposes paths forward for validation of new methods that are not intended as one-to-one replacements of animal studies. This includes submitting only mature methods for validation that were developed following good practices and good documentation, proposing a greater emphasis on well-documented transferability studies, and adopting a cost-sharing model between those who benefit from validated methods.
Collapse
Affiliation(s)
| | | | | | - Lisa Baumann
- Vrije Universiteit Amsterdam, Amsterdam Institute for Life and Environment, Section Environmental Health and Toxicology, Amsterdam, The Netherlands
| | - Sharon Munn
- European Commission, Joint Research Centre (JRC), Ispra, Italy
| | - Cécile Michel
- REACh-CLP-Endocrine Disrupters Unit, Risk Assessment Department, French Agency for Food, Environmental and Occupational Health Safety (ANSES), Maisons-Alfort, France
| |
Collapse
|
2
|
Turnbull MJ, Grigsby I, Unertl K, Sokol K, Nordby T, Liu C, Bailey A, Spiewak B, Smith G, McNulty AK. Comparison of Medical Tape Performance Using Skin Response Quantitative Measurements on Healthy Volunteers. Cureus 2024; 16:e56548. [PMID: 38646282 PMCID: PMC11027027 DOI: 10.7759/cureus.56548] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 03/18/2024] [Indexed: 04/23/2024] Open
Abstract
BACKGROUND Medical tapes can lead to skin damage upon removal in susceptible patients with fragile skin and at higher risk of developing tissue injury. PURPOSE We compared the effect of medical tapes with silicone-based versus acrylate-based adhesives on the back or volar forearm stratum corneum using analytical techniques to assess skin condition and potential damage post product removal on 88 healthy volunteers. METHODS Two studies were conducted in separate facilities (Study 1: 3M In-house Clinical Facility, St. Paul, Minnesota; Study 2: DermiCo, LLC, Broomall, Pennsylvania). Four commercially available tapes were the same in both studies, two for each type of adhesive. We evaluated adhesion to the skin, total proteins and corneocytes removed by the tapes, changes in transepidermal water loss (TEWL), and induction of the inflammatory cytokine interleukin-1 alpha (IL-1a). RESULTS One of the silicone tapes displayed the strongest adhesion at 24 hours, and one of the acrylate tapes had the lowest adhesion, showing differences in performance within adhesive categories. The adhesion forces did not correlate with the amount of total protein or corneocytes removed. Silicone adhesives removed less total protein and corneocytes than acrylate adhesives. Silicone adhesives did not alter TEWL, whereas acrylate adhesives significantly raised TEWL. There were no differences in interleukin-1alpha induction. CONCLUSION The silicone adhesive tapes were less disruptive to the skin barrier than the acrylate adhesive tapes, even in healthy volunteers whose skin is not as fragile as what is observed in typical patients. This type of data could guide clinical product usage decisions.
Collapse
Affiliation(s)
| | - Iwen Grigsby
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Karl Unertl
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Kerry Sokol
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Tera Nordby
- Global Medical and Clinical Affairs, 3M Health Care, St. Paul, USA
| | - Cedric Liu
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Anna Bailey
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Brian Spiewak
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| | - Graham Smith
- Global Medical and Clinical Affairs, 3M Health Care, St. Paul, USA
| | - Amy K McNulty
- Medical Solutions Division, 3M Health Care, St. Paul, USA
| |
Collapse
|
3
|
Bhagat S, Bongiorno J, Mariscotti A. Uncertainty of Standardized Track Insulation Measurement Methods for Stray Current Assessment. Sensors (Basel) 2023; 23:5900. [PMID: 37447751 DOI: 10.3390/s23135900] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Revised: 06/21/2023] [Accepted: 06/23/2023] [Indexed: 07/15/2023]
Abstract
Stray current is a relevant phenomenon in particular for DC electrified transportation systems, affecting track and infrastructure within the right of way and other structures and installations nearby. It worsens with time and the level of protection depends on timely maintenance, as well as correct design choices. The assessment of track insulation is the starting point for both stray current monitoring systems and at commissioning or upon major changes. Standardized methods (ref. EN 50122-2 or IEC 62128-2) have been almost unchanged in the last 20 years but suffer from accuracy issues and variability due to parameters and conditions not under the operator's control. The uncertainty of test methods is increasingly important now that contractual specifications require a high level of insulation for new systems. A critical discussion and analysis of the sources of variability and practical constraints is proposed, followed by an evaluation of uncertainty, with the objective not only to assess the accuracy of the provided results, but also to foster research on innovative, more flexible and accurate methods.
Collapse
Affiliation(s)
- Sahil Bhagat
- DITEN, University of Genova, 16145 Genova, Italy
| | | | | |
Collapse
|
4
|
Abstract
Significance: Healthy skin provides a barrier to contaminants. Breaches in skin integrity are often encountered in the patient health care journey, owing to intrinsic health issues or to various procedures and medical devices used. The time has come to move clinical practice beyond mere awareness of medical adhesive-related skin injury and toward improved care and outcomes. Recent Advances: Methods developed in research settings allow quantitative assessments of skin damage based on the measurement of baseline skin properties. These properties become altered by stress and over time. Assessment methods typically used by the cosmetic industry to compare product performance could offer new possibilities to improve clinical practice by providing better information on the status of patient skin. This review summarizes available skin assessment methods as well as specific patient risks for skin damage. Critical Issues: Patients in health care settings may be at risk for skin damage owing to predisposing medical conditions, health status, medications taken, and procedures or devices used in their treatment. Skin injuries come as an additional burden to these medical circumstances and could be prevented. Technology should be leveraged to improve care, help maintain patient skin health, and better characterize functional wound closure. Future Directions: Skin testing methods developed to evaluate cosmetic products or assess damage caused by occupational exposure can provide detailed, quantitative information on the integrity of skin. Such methods have the potential to guide prevention and treatment efforts to improve the care of patients suffering from skin integrity issues while in the health care system.
Collapse
Affiliation(s)
- Stéphanie F. Bernatchez
- 3M Health Care, St. Paul, Minnesota, USA.,Correspondence: 3M Health Care, St. Paul, MN 55144-1000, USA
| | | |
Collapse
|
5
|
Dos Santos RS, Babiloni-Chust I, Marroqui L, Nadal A. Screening of Metabolism-Disrupting Chemicals on Pancreatic α-Cells Using In Vitro Methods. Int J Mol Sci 2022; 24. [PMID: 36613676 DOI: 10.3390/ijms24010231] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 12/07/2022] [Accepted: 12/20/2022] [Indexed: 12/25/2022] Open
Abstract
Metabolism-disrupting chemicals (MDCs) are endocrine disruptors with obesogenic and/or diabetogenic action. There is mounting evidence linking exposure to MDCs to increased susceptibility to diabetes. Despite the important role of glucagon in glucose homeostasis, there is little information on the effects of MDCs on α-cells. Furthermore, there are no methods to identify and test MDCs with the potential to alter α-cell viability and function. Here, we used the mouse α-cell line αTC1-9 to evaluate the effects of MDCs on cell viability and glucagon secretion. We tested six chemicals at concentrations within human exposure (from 0.1 pM to 1 µM): bisphenol-A (BPA), tributyltin (TBT), perfluorooctanoic acid (PFOA), triphenylphosphate (TPP), triclosan (TCS), and dichlorodiphenyldichloroethylene (DDE). Using two different approaches, MTT assay and DNA-binding dyes, we observed that BPA and TBT decreased α-cell viability via a mechanism that depends on the activation of estrogen receptors and PPARγ, respectively. These two chemicals induced ROS production, but barely altered the expression of endoplasmic reticulum (ER) stress markers. Although PFOA, TPP, TCS, and DDE did not alter cell viability nor induced ROS generation or ER stress, all four compounds negatively affected glucagon secretion. Our findings suggest that αTC1-9 cells seem to be an appropriate model to test chemicals with metabolism-disrupting activity and that the improvement of the test methods proposed herein could be incorporated into protocols for the screening of diabetogenic MDCs.
Collapse
|
6
|
Głodkowska W, Laskowska-Bury J. Proposition for Determining the Residual Strength of Fiber-Reinforced Cement Composite. Materials (Basel) 2022; 15:7546. [PMID: 36363137 PMCID: PMC9655825 DOI: 10.3390/ma15217546] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/26/2022] [Revised: 10/21/2022] [Accepted: 10/24/2022] [Indexed: 06/16/2023]
Abstract
Designing bending elements made of fiber composites requires knowledge of the residual strengths. Residual strengths determined according to PN-EN 14651, regardless of the type of matrix and the fibers used, are characterized by a very-high coefficient of variation, about 30%. The variability of this feature is so large that the normal distribution adopted in statistical analyses, which is consistent for compressive strength or tensile strength, may, in the case of residual strengths, result in a significant overdesign of the elements. Therefore, the article proposes a novel method of determining the residual strength with the use of centrally bent square plates simply supported at the perimeter. The coefficient of variation of this characteristic in the case of plate testing is about 8%.
Collapse
|
7
|
Jacobs MN, Ezendam J, Hakkert B, Oelgeschlaeger M. Potential of concentration-response data to broaden regulatory application of in vitro test guidelines. ALTEX 2022; 39:315–321. [PMID: 34882776 DOI: 10.14573/altex.2107091] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/09/2021] [Indexed: 11/23/2022]
Affiliation(s)
- Miriam N Jacobs
- Centre for Radiation, Chemical and Environmental Hazards, Public Health England, Chilton, OXON, UK
| | - Janine Ezendam
- National Institute for Public Health and the Environment (RIVM), Bilthoven, The Netherlands
| | - Betty Hakkert
- National Institute for Public Health and the Environment (RIVM), Bilthoven, The Netherlands
| | | |
Collapse
|
8
|
Chandran KM, Ramamurthy PC, Kanjo K, Narayan R, Menon SR. Efficacy of Ultraviolet-C Devices for the Disinfection of Personal Protective Equipment Fabrics and N95 Respirators. J Res Natl Inst Stand Technol 2021; 126:126023. [PMID: 36475082 PMCID: PMC9681524 DOI: 10.6028/jres.126.023] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 07/26/2021] [Indexed: 06/15/2023]
Abstract
Since the onset of the coronavirus disease 2019 (COVID-19) pandemic, a plethora of ultraviolet-C (UV-C) disinfection products have come to market, especially in emerging economies. UV-C-based disinfection products for mobile phones, food packaging, face masks and personal protective equipment (PPE), and other everyday objects are available in popular electronic-commerce platforms as consumer products. Product designers from multinational to startup companies began to design UV-C disinfection products but had no prior-art reference, user feedback, or validation of product efficacy, which are important stages in product design. A UV-C disinfection product cannot be assessed by most consumers for its viricidal efficacy. Many firms entered the domain of UV-C products and were unaware of the necessary validation requirements. Lack of availability and access to virology laboratories, due to lockdowns in countries, and lack of standards and certification for UV-C disinfection products limited product designers and firms in benchmarking their UV-C-based devices before market release. This work evaluates two UV-C disinfection devices for viricidal efficacy on PPE fabric and National Institute for Occupational Safety and Health (NIOSH)-certified N95 respirators through controlled experiments using the H1N1 virus, which is enveloped and is transmitted via the respiratory route similar to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the cause of COVID-19. The experiment also evaluated the effectiveness of chemical disinfectants along with and versus UV-C disinfection. Experiments for material selection, UV dose calculation, and UV endurance of PPE samples to be disinfected are also discussed. The outcome of this work establishes a systematic method to validate the efficacy of UV-C disinfection products. The design guidelines would benefit product designers in designing UV-C-based disinfection products.
Collapse
Affiliation(s)
| | | | - Kawkab Kanjo
- Indian Institute of Science,
Bangalore 560012,
India
| | - Rohan Narayan
- Indian Institute of Science,
Bangalore 560012,
India
| | | |
Collapse
|
9
|
Fales AM, Ilev IK, Pfefer TJ. Evaluation of standardized performance test methods for biomedical Raman spectroscopy. J Biomed Opt 2021; 27:JBO-210201SSR. [PMID: 34713648 PMCID: PMC8551908 DOI: 10.1117/1.jbo.27.7.074705] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/25/2021] [Accepted: 10/07/2021] [Indexed: 05/06/2023]
Abstract
SIGNIFICANCE Raman spectroscopy has emerged as a promising technique for a variety of biomedical applications. The unique ability to provide molecular specific information offers insight to the underlying biochemical changes that result in disease states such as cancer. However, one of the hurdles to successful clinical translation is a lack of international standards for calibration and performance assessment of modern Raman systems used to interrogate biological tissue. AIM To facilitate progress in the clinical translation of Raman-based devices and assist the scientific community in reaching a consensus regarding best practices for performance testing. APPROACH We reviewed the current literature and available standards documents to identify methods commonly used for bench testing of Raman devices (e.g., relative intensity correction, wavenumber calibration, noise, resolution, and sensitivity). Additionally, a novel 3D-printed turbid phantom was used to assess depth sensitivity. These approaches were implemented on three fiberoptic-probe-based Raman systems with different technical specifications. RESULTS While traditional approaches demonstrated fundamental differences due to detectors, spectrometers, and data processing routines, results from the turbid phantom illustrated the impact of illumination-collection geometry on measurement quality. CONCLUSIONS Specifications alone are necessary but not sufficient to predict in vivo performance, highlighting the need for phantom-based test methods in the standardized evaluation of Raman devices.
Collapse
Affiliation(s)
- Andrew M. Fales
- U.S. Food and Drug Administration, Center for Devices and Radiological Health, Silver Spring, Maryland, United States
- Address all correspondence to Andrew M. Fales,
| | - Ilko K. Ilev
- U.S. Food and Drug Administration, Center for Devices and Radiological Health, Silver Spring, Maryland, United States
| | - T. Joshua Pfefer
- U.S. Food and Drug Administration, Center for Devices and Radiological Health, Silver Spring, Maryland, United States
| |
Collapse
|
10
|
Ding X, Geng H, Shi K, Song L, Li S, Liu G. Study on Adaptability of Test Methods for Workability of Fresh Self-Compacting SFRC. Materials (Basel) 2021; 14:5312. [PMID: 34576537 PMCID: PMC8468712 DOI: 10.3390/ma14185312] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/29/2021] [Revised: 09/12/2021] [Accepted: 09/13/2021] [Indexed: 11/30/2022]
Abstract
To ensure the quality of concrete construction, the workability of fresh mix measured by rational test methods is critical to be controlled. With the presence of steel fibers, whether the test methods and evaluation indices of fresh self-compacting concrete (SCC) are adaptable for self-compacting steel fiber reinforced concrete (SFRC) needs to be systematically verified. In this paper, seven groups of self-compacting SFRC, referenced with one group SCC, were prepared by using the mix proportion design method based on the steel fiber-aggregates skeleton packing test. The main factors included the volume fraction and the length of hooked-end steel fiber. Tests for filling ability, passing ability, and stability of fresh self-compacting SFRC and SCC were carried out. Results indicate that the adaptability was well for the slump-flow test with indices of slump flow and flow time T500 to evaluate the filling ability, the J-ring flow test with an index of PA level to evaluate the passing ability, and the static segregation test with an index of static segregation resistance to evaluate the stability of fresh self-compacting SFRC. By the repeated tests and measurements, the slump cone should be vertically lifted off to a height of 300 mm within 3 s at a constant speed, the spacing of the rebar in the J-ring test should be adjusted to be two times the fiber length. If the table jumping test is used, the dynamic segregation percent should be increased to 35% to fit the result of the static segregation test. Good workability of the self-compacting SFRC prepared in this study is presented with the general evaluation of test results.
Collapse
Affiliation(s)
- Xinxin Ding
- International Joint Research Lab for Eco-Building Materials and Engineering of Henan, School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou 450045, China; (X.D.); (H.G.); (K.S.); (S.L.)
- Collaborative Innovation Center for Efficient Utilization of Water Resources, North China University of Water Resources and Electric Power, Zhengzhou 450045, China;
| | - Haibin Geng
- International Joint Research Lab for Eco-Building Materials and Engineering of Henan, School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou 450045, China; (X.D.); (H.G.); (K.S.); (S.L.)
- Collaborative Innovation Center for Efficient Utilization of Water Resources, North China University of Water Resources and Electric Power, Zhengzhou 450045, China;
| | - Kang Shi
- International Joint Research Lab for Eco-Building Materials and Engineering of Henan, School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou 450045, China; (X.D.); (H.G.); (K.S.); (S.L.)
| | - Li Song
- Yellow River Institute of Hydraulic Research, Zhengzhou 450003, China
| | - Shangyu Li
- International Joint Research Lab for Eco-Building Materials and Engineering of Henan, School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou 450045, China; (X.D.); (H.G.); (K.S.); (S.L.)
| | - Guirong Liu
- Collaborative Innovation Center for Efficient Utilization of Water Resources, North China University of Water Resources and Electric Power, Zhengzhou 450045, China;
| |
Collapse
|
11
|
Kanniyappan U, Wang B, Yang C, Ghassemi P, Litorja M, Suresh N, Wang Q, Chen Y, Pfefer TJ. Performance test methods for near-infrared fluorescence imaging. Med Phys 2020; 47:3389-3401. [PMID: 32304583 PMCID: PMC7496362 DOI: 10.1002/mp.14189] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2019] [Revised: 03/03/2020] [Accepted: 04/10/2020] [Indexed: 12/15/2022] Open
Abstract
PURPOSE Near-infrared fluorescence (NIRF) imaging using exogenous contrast has gained much attention as a technique for enhancing visualization of vasculature using untargeted agents, as well as for the detection and localization of cancer with targeted agents. In order to address the emerging need for standardization of NIRF imaging technologies, it is necessary to identify the best practices suitable for objective, quantitative testing of key image quality characteristics. Toward the development of a battery of test methods that are rigorous yet applicable to a wide variety of devices, we have evaluated techniques for phantom design, measurement, and calculation of specific performance metrics. METHODS Using a NIRF imaging system for indocyanine green imaging, providing excitation at 780 nm and detection above 830 nm, we explored methods to evaluate uniformity, field of view, spectral crosstalk, spatial resolution, depth of field, sensitivity, linearity, and penetration depth. These measurements were performed using fluorophore-doped multiwell plate and high turbidity planar phantoms, as well as a 3D-printed multichannel phantom and a USAF 1951 resolution target. RESULTS AND CONCLUSIONS Based on a wide range of approaches described in medical and fluorescence imaging literature, we have developed and demonstrated a cohesive battery of test methods for evaluation of fluorescence image quality in wide-field imagers. We also propose a number of key metrics that can facilitate direct, quantitative comparison of device performance. These methods have the potential to facilitate more uniform evaluation and inter-comparison of clinical and preclinical imaging systems than is typically achieved, with the long-term goal of establishing international standards for fluorescence image quality assessment.
Collapse
Affiliation(s)
- Udayakumar Kanniyappan
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, USA.,Center for Devices and Radiological Health, Food and Drug Administration, Silver Spring, MD, USA
| | - Bohan Wang
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, USA
| | - Charles Yang
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, USA
| | - Pejhman Ghassemi
- Center for Devices and Radiological Health, Food and Drug Administration, Silver Spring, MD, USA
| | - Maritoni Litorja
- National Institute of Standards and Technology, Gaithersburg, MD, USA
| | - Nitin Suresh
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, USA
| | - Quanzeng Wang
- Center for Devices and Radiological Health, Food and Drug Administration, Silver Spring, MD, USA
| | - Yu Chen
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, USA.,Department of Biomedical Engineering, University of Massachusetts Amherst, MA, USA
| | - T Joshua Pfefer
- Center for Devices and Radiological Health, Food and Drug Administration, Silver Spring, MD, USA
| |
Collapse
|
12
|
van Duursen MBM, Boberg J, Christiansen S, Connolly L, Damdimopoulou P, Filis P, Fowler PA, Gadella BM, Holte J, Jääger K, Johansson HKL, Li T, Mazaud-Guittot S, Parent AS, Salumets A, Soto AM, Svingen T, Velthut-Meikas A, Bay Wedebye E, Xie Y, van den Berg M. Safeguarding Female Reproductive Health against Endocrine Disrupting Chemicals-The FREIA Project. Int J Mol Sci 2020; 21:E3215. [PMID: 32370092 PMCID: PMC7246859 DOI: 10.3390/ijms21093215] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2020] [Revised: 04/21/2020] [Accepted: 04/29/2020] [Indexed: 12/14/2022] Open
Abstract
Currently available test methods are not well-suited for the identification of chemicals that disturb hormonal processes involved in female reproductive development and function. This renders women's reproductive health at increasing risk globally, which, coupled with increasing incidence rates of reproductive disorders, is of great concern. A woman's reproductive health is largely established during embryonic and fetal development and subsequently matures during puberty. The endocrine system influences development, maturation, and function of the female reproductive system, thereby making appropriate hormone levels imperative for correct functioning of reproductive processes. It is concerning that the effects of human-made chemicals on the endocrine system and female reproductive health are poorly addressed in regulatory chemical safety assessment, partly because adequate test methods are lacking. Our EU-funded project FREIA aims to address this need by increasing understanding of how endocrine disrupting chemicals (EDCs) can impact female reproductive health. We will use this information to provide better test methods that enable fit-for-purpose chemical regulation and then share our knowledge, promote a sustainable society, and improve the reproductive health of women globally.
Collapse
Affiliation(s)
- Majorie B. M. van Duursen
- Department Environment and Health, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV Amsterdam, The Netherlands
| | - Julie Boberg
- National Food Institute, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark; (J.B.); (S.C.); (H.K.L.J.); (T.S.); (E.B.W.)
| | - Sofie Christiansen
- National Food Institute, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark; (J.B.); (S.C.); (H.K.L.J.); (T.S.); (E.B.W.)
| | - Lisa Connolly
- The Institute for Global Food Security, School of Biological Sciences, Queen’s University Belfast, Belfast BT9 5DL, Northern Ireland, UK; (L.C.); (Y.X.)
| | - Pauliina Damdimopoulou
- Division of Obstetrics and Gynecology, Department of Clinical Science, Intervention and Technology, Karolinska Institutet and Karolinska University Hospital, SE-14186 Stockholm, Sweden; (P.D.); (T.L.)
| | - Panagiotis Filis
- Institute of Medical Sciences, School of Medicine, Medical Sciences & Nutrition, Foresterhill, Aberdeen AB23 8ZD, UK; (P.F.); (P.A.F.)
| | - Paul A. Fowler
- Institute of Medical Sciences, School of Medicine, Medical Sciences & Nutrition, Foresterhill, Aberdeen AB23 8ZD, UK; (P.F.); (P.A.F.)
| | - Bart M. Gadella
- Department of Population Health Sciences, Faculty of Veterinary Medicine, Utrecht University, Yalelaan 2, 3584 CM Utrecht, The Netherlands; (B.M.G.); (M.v.d.B.)
| | - Jan Holte
- Carl von Linné Clinic, Uppsala Science Park, S-751 83 Uppsala, Sweden;
| | - Kersti Jääger
- Department of Obstetrics and Gynaecology, Institute of Clinical Medicine, University of Tartu and Competence Centre on Health Technologies, Teaduspargi 13, 50411 Tartu, Estonia; (K.J.); (A.S.)
| | - Hanna K. L. Johansson
- National Food Institute, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark; (J.B.); (S.C.); (H.K.L.J.); (T.S.); (E.B.W.)
| | - Tianyi Li
- Division of Obstetrics and Gynecology, Department of Clinical Science, Intervention and Technology, Karolinska Institutet and Karolinska University Hospital, SE-14186 Stockholm, Sweden; (P.D.); (T.L.)
| | - Séverine Mazaud-Guittot
- Univ Rennes, Inserm, EHESP, Irset (Institut de recherche en santé, environnement et travail)—UMR_S 1085, F-35000 Rennes, France;
| | - Anne-Simone Parent
- Neuroendocrinology Unit, GIGA-Institute, University of Liège, Belgium.1, Avenue de l’hôpital, 4000 Liège, Belgium;
| | - Andres Salumets
- Department of Obstetrics and Gynaecology, Institute of Clinical Medicine, University of Tartu and Competence Centre on Health Technologies, Teaduspargi 13, 50411 Tartu, Estonia; (K.J.); (A.S.)
| | - Ana M. Soto
- Department of Immunology, Tufts University School of Medicine, Boston, MA 0211, USA;
| | - Terje Svingen
- National Food Institute, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark; (J.B.); (S.C.); (H.K.L.J.); (T.S.); (E.B.W.)
| | - Agne Velthut-Meikas
- Department of Chemistry and Biotechnology, School of Science, Tallinn University of Technology, 12618 Tallinn, Estonia;
| | - Eva Bay Wedebye
- National Food Institute, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark; (J.B.); (S.C.); (H.K.L.J.); (T.S.); (E.B.W.)
| | - Yuling Xie
- The Institute for Global Food Security, School of Biological Sciences, Queen’s University Belfast, Belfast BT9 5DL, Northern Ireland, UK; (L.C.); (Y.X.)
| | - Martin van den Berg
- Department of Population Health Sciences, Faculty of Veterinary Medicine, Utrecht University, Yalelaan 2, 3584 CM Utrecht, The Netherlands; (B.M.G.); (M.v.d.B.)
| |
Collapse
|
13
|
Post A, Dawson L, Hoshizaki TB, Gilchrist MD, Cusimano MD. Development of a test method for adult ice hockey helmet evaluation. Comput Methods Biomech Biomed Engin 2020; 23:1-13. [PMID: 32343185 DOI: 10.1080/10255842.2020.1758680] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2019] [Revised: 03/25/2020] [Accepted: 04/17/2020] [Indexed: 10/24/2022]
Abstract
Ice hockey helmet standards have primarily been developed to reduce risk of traumatic brain injury (TBI). While severe TBI has become a rare event in ice hockey, concussion, a type of mild TBI, remains a common head injury. Concussions, in ice hockey result from a number of head impact events including, collisions, stick impacts, puck impacts, falls into the boards, impacts to the glass, and falls to the ice. Helmet testing methods need to represent the impact events creating concussions in ice hockey. The purpose of this research was to develop a helmet test protocol and performance metric for concussive impacts in ice hockey. A protocol using concussion impact parameters from published literature was created that used monorail and linear impactors to impact a helmeted Hybrid III headform. The linear and rotational acceleration time curves were then used to calculate brain tissue strain using the University College Brain Trauma Model. The proposed test protocols created kinematic responses that were representative of levels associated with concussion in ice hockey. Rotational velocity and rotational acceleration were both identified as useful performance metrics representing levels of risk for concussion.
Collapse
Affiliation(s)
- Andrew Post
- St. Michael's Hospital, Toronto, Canada
- Human Kinetics, University of Ottawa, Ottawa, Canada
- School of Mechanical & Materials Engineering, University College Dublin, Dublin, Ireland
| | - Lauren Dawson
- Human Kinetics, University of Ottawa, Ottawa, Canada
| | | | - Michael D Gilchrist
- School of Mechanical & Materials Engineering, University College Dublin, Dublin, Ireland
| | | |
Collapse
|
14
|
Paulter NG. Test Methods to Rigorously, Reproducibly, and Accurately Measure the Detection Performance of Walk-through Metal Detectors. J Test Eval 2020; 48:10.1520/jte20180220. [PMID: 38497029 PMCID: PMC10941206 DOI: 10.1520/jte20180220] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/19/2024]
Abstract
Walk-through metal detectors (WTMDs) are the primary tool for the detection of concealed metal contraband and threat items on a person. They are found at almost all security checkpoint stations worldwide. It is important for security that assessing the detection performance of WTMDs is done rigorously, accurately, and reproducibly. Current standardized test methods do not provide this capability. Moreover, exhaustive testing would be prohibitively expensive and slow. Test methods, test objects, and their rationale are described here that can be used to accurately and reproducibly measure the detection performance of a WTMD while rigorously exercising its detection capability. Focused selection of the most informative test parameters reduces the time required for testing by about two orders of magnitude.
Collapse
Affiliation(s)
- Nicholas G Paulter
- Material Measurement Laboratory, National Institute of Standards and Technology, 100 Bureau Dr., Mail Stop 8102, Gaithersburg, MD 20899, USA
| |
Collapse
|
15
|
Stryszewska T, Dudek M. Selection of Method of Chemical Analysis in Measuring the Salinity of Mineral Materials. Materials (Basel) 2020; 13:ma13030559. [PMID: 31991552 PMCID: PMC7040730 DOI: 10.3390/ma13030559] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/07/2020] [Revised: 01/17/2020] [Accepted: 01/22/2020] [Indexed: 11/24/2022]
Abstract
The article deals with the issue of salt content in brick buildings, which plays an important role in the assessment of the technical condition, in particular of historic buildings. A question has been asked about the selection of the best research method to determine the salinity of mineral materials. To obtain the answer, the authors conducted some tests on ceramic bricks salted with seven types of salt solutions. Research methods such as: spectrophotometry (UV), ion chromatography (High Performance Liquid Chromatography (HPLC)), X-Ray Fluorescence Spectrometry (XRF) and Energy-Dispersive X-Ray Spectroscopy (EDS) were compared. The above methods belong to two groups: the first is based on aqueous extracts and allows the determination of water-soluble salts, and the second concerns testing directly on the sample so that insoluble salts can also be determined. The results tests indicate that the methods based on solid phases (XRF and EDS) give higher salinity values than those based on aqueous extracts (HPLC and UV). The results were also analysed with regard to the type of salt. Larger differences are observed for sulphate salts while chloride salts are characterised by smaller differences. On this basis, it is concluded that the salt content of the material is best assessed using tests that make it possible to recognise the salt in question and its quantity.
Collapse
|
16
|
Krebs A, Nyffeler J, Karreman C, Schmidt BZ, Kappenberg F, Mellert J, Pallocca G, Pastor M, Rahnenführer J, Leist M. Determination of benchmark concentrations and their statistical uncertainty for cytotoxicity test data and functional in vitro assays. ALTEX 2019; 37:155-163. [PMID: 31833558 DOI: 10.14573/altex.1912021] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2019] [Accepted: 12/03/2019] [Indexed: 11/23/2022]
Abstract
Many toxicological test methods, including assays of cell viability and function, require an evaluation of concentration-response data. This often involves curve fitting, and the resulting mathematical functions are then used to determine the concentration at which a certain deviation from the control value occurs (e.g. a decrease of cell viability by 15%). Such a threshold is called the benchmark response (BMR). For a toxicological test, it is often of interest to determine the concentration of test compound at which a pre-defined BMR of e.g. 10, 25 or 50% is reached. The concentration at which the modelled curve crosses the BMR is called the benchmark concentration (BMC). We present a user-friendly, web-based tool (BMCeasy), designed for operators without programming skills and profound statistical background, to determine BMCs and their confidence intervals. BMCeasy allows simultaneous analysis of viability plus a functional test endpoint, and it yields absolute BMCs with confidence intervals for any BMR. Besides an explanation of the algorithm underlying BMCeasy, this article also gives multiple examples of data outputs. BMCeasy was used within the EU-ToxRisk project for preparing data packages that were submitted to regulatory authorities, demonstrating the real-life applicability of the tool.
Collapse
Affiliation(s)
- Alice Krebs
- In vitro Toxicology and Biomedicine, Department inaugurated by the Doerenkamp-Zbinden Foundation, University of Konstanz, Konstanz, Germany.,Konstanz Research School Chemical Biology (KoRS CB), University of Konstanz, Konstanz, Germany
| | - Johanna Nyffeler
- In vitro Toxicology and Biomedicine, Department inaugurated by the Doerenkamp-Zbinden Foundation, University of Konstanz, Konstanz, Germany.,present address: Center for Computational Toxicology & Exposure, US EPA, Research Triangle Park, NC, USA
| | - Christiaan Karreman
- In vitro Toxicology and Biomedicine, Department inaugurated by the Doerenkamp-Zbinden Foundation, University of Konstanz, Konstanz, Germany
| | - Béla Z Schmidt
- Switch Laboratory, VIB-KU Leuven Center for Brain & Disease Research, Department of Cellular and Molecular Medicine, Katholieke Universiteit Leuven, Leuven, Belgium
| | | | - Jan Mellert
- Faculty of Business and Economics, Macroeconomics Dortmund University, Technical University of Dortmund, Dortmund, Germany
| | | | - Manuel Pastor
- Research Programme on Biomedical Informatics (GRIB), Institut Hospital del Mar d'Investigacions Mèdiques (IMIM), Dept. of Experimental and Health Sciences, Universitat Pompeu Fabra, Barcelona, Spain
| | - Jörg Rahnenführer
- Department of Statistics, Technical University of Dortmund, Dortmund, Germany
| | - Marcel Leist
- In vitro Toxicology and Biomedicine, Department inaugurated by the Doerenkamp-Zbinden Foundation, University of Konstanz, Konstanz, Germany.,CAAT-Europe, University of Konstanz, Konstanz, Germany
| |
Collapse
|
17
|
Urbán P, Liptrott NJ, Bremer S. Overview of the blood compatibility of nanomedicines: A trend analysis of in vitro and in vivo studies. Wiley Interdiscip Rev Nanomed Nanobiotechnol 2018; 11:e1546. [PMID: 30556649 PMCID: PMC7816241 DOI: 10.1002/wnan.1546] [Citation(s) in RCA: 23] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/07/2018] [Revised: 10/03/2018] [Accepted: 10/12/2018] [Indexed: 12/12/2022]
Abstract
As nanomedicines have the potential to address many currently unmet medical needs, the early identification of regulatory requirements that could hamper a smooth translation of nanomedicines from the laboratory environment to clinical applications is of utmost importance. The blood system is especially relevant as many nanomedicinal products that are currently under development are designed for intravenous administration and cells of the blood system will be among the first biological systems exposed to the injected nanomedicine. This review collects and summarizes the current knowledge related to the blood compatibility of nanomedicines and nanomaterials with a potential use in biomedical applications. Different types of nanomedicines were analyzed for their toxicity to the blood system, and the role of their physicochemical properties was further elucidated. Trends were identified related to: (a) the nature of the most frequently occurring blood incompatibilities such as thrombogenicity and complement activation, (b) the contribution of physicochemical properties to these blood incompatibilities, and (c) the similarities between data retrieved from in vivo and in vitro studies. Finally, we provide an overview of available standards that allow evaluating the compatibility of a material with the blood system. This article is categorized under:
Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Therapeutic Approaches and Drug Discovery > Emerging Technologies Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine
Collapse
Affiliation(s)
- Patricia Urbán
- Consumer Products Safety Unit, Directorate F - Health, Consumers and Reference Materials, European Commission Joint Research Centre (JRC), Ispra (VA), Italy
| | - Neill J Liptrott
- Department of Molecular and Clinical Pharmacology, Institute of Translational Medicine, University of Liverpool, Liverpool, UK
| | - Susanne Bremer
- Consumer Products Safety Unit, Directorate F - Health, Consumers and Reference Materials, European Commission Joint Research Centre (JRC), Ispra (VA), Italy
| |
Collapse
|
18
|
Ricken G, Schwaiger C, De Simoni D, Pichler V, Lang J, Glatter S, Macher S, Rommer PS, Scholze P, Kubista H, Koneczny I, Höftberger R. Detection Methods for Autoantibodies in Suspected Autoimmune Encephalitis. Front Neurol 2018; 9:841. [PMID: 30364136 PMCID: PMC6191500 DOI: 10.3389/fneur.2018.00841] [Citation(s) in RCA: 49] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2018] [Accepted: 09/18/2018] [Indexed: 12/11/2022] Open
Abstract
This review provides an overview on different antibody test methods that can be applied in cases of suspected paraneoplastic neurological syndromes (PNS) and anti-neuronal autoimmune encephalitis (AIE) in order to explain their diagnostic value, describe potential pitfalls and limitations, and discuss novel approaches aimed at discovering further autoantibodies. Onconeuronal antibodies are well-established biomarkers for PNS and may serve as specific tumor markers. The recommended procedure to detect onconeuronal antibodies is a combination of indirect immunohistochemistry on fixed rodent cerebellum and confirmation of the specificity by line assays. Simplification of this approach by only using line assays with recombinant proteins bears the risk to miss antibody-positive samples. Anti-neuronal surface antibodies are sensitive and specific biomarkers for AIE. Their identification requires the use of test methods that allow the recognition of conformation dependent epitopes. These commonly include cell-based assays and tissue based assays with unfixed rodent brain tissue. Tissue based assays can detect most of the currently known neuronal surface antibodies and thus enable broad screening of biological samples. A complementary testing on live neuronal cell cultures may confirm that the antibody recognizes a surface epitope. In patients with peripheral neuropathy, the screening may be expanded to teased nerve fibers to identify antibodies against the node of Ranvier. This method helps to identify a novel subgroup of peripheral autoimmune neuropathies, resulting in improved immunotherapy of these patients. Tissue based assays are useful to discover additional autoantibody targets that play a role in diverse autoimmune neurological syndromes. Antibody screening assays represent promising avenues of research to improve the diagnostic yield of current assays for antibody-associated autoimmune encephalitis.
Collapse
Affiliation(s)
- Gerda Ricken
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Carmen Schwaiger
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Desiree De Simoni
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Valerie Pichler
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Julia Lang
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Sarah Glatter
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Stefan Macher
- Department of Neurology, Medical University of Vienna, Vienna, Austria
| | - Paulus S Rommer
- Department of Neurology, Medical University of Vienna, Vienna, Austria
| | - Petra Scholze
- Department of Pathobiology of the Nervous System, Center for Brain Research, Medical University of Vienna, Vienna, Austria
| | - Helmut Kubista
- Center for Physiology and Pharmacology, Medical University of Vienna, Vienna, Austria
| | - Inga Koneczny
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| | - Romana Höftberger
- Institute of Neurology, Medical University of Vienna, Vienna, Austria
| |
Collapse
|
19
|
Panday S, Kathard H, Pillay M, Wilson W. First-language raters' opinions when validating word recordings for a newly developed speech reception threshold test. S Afr J Commun Disord 2018; 65:e1-e6. [PMID: 29781702 PMCID: PMC5913765 DOI: 10.4102/sajcd.v65i1.555] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/08/2017] [Revised: 10/03/2017] [Accepted: 10/05/2017] [Indexed: 11/08/2022] Open
Abstract
Background The purpose of this study was to consider the value of adding first-language speaker ratings to the process of validating word recordings for use in a new speech reception threshold (SRT) test in audiology. Previous studies had identified 28 word recordings as being suitable for use in a new SRT test. These word recordings had been shown to satisfy the linguistic criteria of familiarity, phonetic dissimilarity and tone, and the psychometric criterion of homogeneity of audibility. Objectives The aim of the study was to consider the value of adding first-language speakers’ ratings when validating word recordings for a new SRT test. Method A single observation, cross-sectional design was used to collect and analyse quantitative data in this study. Eleven first-language isiZulu speakers, purposively selected, were asked to rate each of the word recordings for pitch, clarity, naturalness, speech rate and quality on a 5-point Likert scale. The percent agreement and Friedman test were used for analysis. Results More than 20% of these 11 participants rated the three-word recordings below ‘strongly agree’ in the category of pitch or tone, and one-word recording below ‘strongly agree’ in the categories of pitch or tone, clarity or articulation and naturalness or dialect. Conclusion The first-language speaker ratings proved to be a valuable addition to the process of selecting word recordings for use in a new SRT test. In particular, these ratings identified potentially problematic word recordings in the new SRT test that had been missed by the previously and more commonly used linguistic and psychometric selection criteria.
Collapse
Affiliation(s)
- Seema Panday
- Discipline of Audiology, School of Health Sciences, University of KwaZulu-Natal.
| | | | | | | |
Collapse
|
20
|
Abstract
Test methods for measuring safety and performance of mobile manipulators have yet to be developed. Therefore, potential mobile manipulator users cannot compare one system to another. Systems Modeling Language (SysML) is a general-purpose modeling language for systems engineering applications that supports the specification, analysis, design, verification, and validation of simple through complex systems, such as mobile manipulators. As test methods are developed to allow performance comparison of the varied mobile manipulators, so to should be the case of allowing comparison of most any mobile manipulator configuration and control strategy during performance measurements. Additionally, mobile manipulator manufacturers and users can then compare these systems to tasks using various methods. This paper uses SysML to describe two measurement methods (optical tracking and artifacts) and the performance measurement of mobile manipulators performing assembly tasks. The SysML models are verified through systems review, referenced experimentation and summarize with uncertainty propagation models of the mobile manipulator.
Collapse
Affiliation(s)
- Roger Bostelman
- National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
- Le2i, Université de Bourgogne, BP 47870, 21078 Dijon, France
| | - Sebti Foufou
- Le2i, Université de Bourgogne, BP 47870, 21078 Dijon, France
- New York University Abu Dhabi, P.O. Box 129188, Computer Science, Abu Dhabi, UAE
| | - Tsai Hong
- National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| | - Mili Shah
- Loyola University Maryland, 4501 N. Charles Street, Baltimore, MD 21210, USA
| |
Collapse
|
21
|
Bernatchez SF, Tucker J, Chiffoleau G. Hyperbaric Oxygen Therapy and Oxygen Compatibility of Skin and Wound Care Products. Adv Wound Care (New Rochelle) 2017; 6:371-381. [PMID: 29098113 DOI: 10.1089/wound.2017.0742] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2017] [Accepted: 07/13/2017] [Indexed: 11/12/2022] Open
Abstract
Objective: Use test methods to assess the oxygen compatibility of various wound care products. Approach: There are currently no standard test methods specifically for evaluating the oxygen compatibility and safety of materials under hyperbaric oxygen (HBO) conditions. However, tests such as the oxygen index (OI), oxygen exposure (OE), and autogenous ignition temperature (AIT) can provide useful information. Results: The OI test measures the minimum oxygen concentration that will support candle-like burning, and it was used to test 44 materials. All but two exhibited an OI equal to or greater (safer) than a control material commonly used in HBO. The OE test exposes each material to an oxygen-enriched atmosphere (>99.5% oxygen) to monitor temperature and pressure for an extended duration. The results of the OE testing indicated that none of the 44 articles tested with this method self-ignited within the 60°C, 3 atm pressurized oxygen atmosphere. The AIT test exposes materials to a rapid ramp up in temperature in HBO conditions at 3 atm until ignition occurs. Ten wound care materials and seven materials usually avoided in HBO chambers were tested. The AIT ranged from 138°C to 384°C for wound care products and from 146°C to 420°C for the other materials. Innovation: This work provides useful data and recommendations to help develop a new standard approach for evaluating the HBO compatibility of wound care products to ensure safety for patients and clinicians. Conclusion: The development of an additional test to measure the risk of electrostatic discharge of materials in HBO conditions is needed.
Collapse
|
22
|
Abstract
Development of new endocrine disruption-relevant test methods has been the subject of intensive research efforts for the past several decades, prompted in part by mandates in the 1996 Food Quality Protection Act (FQPA). While scientific understanding and test methods have advanced, questions remain on whether current scientific methods are capable of adequately addressing the complexities of the endocrine system for regulatory health and ecological risk assessments. The specific objective of this article is to perform a comprehensive, detailed evaluation of the adequacy of current test methods to inform regulatory risk assessments of whether a substance has the potential to perturb endocrine-related pathways resulting in human adverse effects. To that end, approximately 42 existing test guidelines (TGs) were considered in the evaluation of coverage for endocrine-related adverse effects. In addition to evaluations of whether test methods are adequate to capture endocrine-related effects, considerations of further enhancements to current test methods, along with the need to develop novel test methods to address existing test method gaps are described. From this specific evaluation, up to 35 test methods are capable of informing whether a chemical substance perturbs known endocrine related biological pathways. Based on these findings, it can be concluded that current validated test methods are adequate to discern substances that may perturb the endocrine system, resulting in an adverse health effect. Together, these test methods predominantly form the core data requirements of a typical food-use pesticide registration submission. It is recognized, however, that the current state of science is rapidly advancing and there is a need to update current test methods to include added enhancements to ensure continued coverage and public health and environmental protection.
Collapse
Affiliation(s)
| | - L W Touart
- b Equiparent Consulting , Woodbridge , VA , USA
| |
Collapse
|
23
|
Tsang C, Shehata MH, Lotfy A. Optimizing a Test Method to Evaluate Resistance of Pervious Concrete to Cycles of Freezing and Thawing in the Presence of Different Deicing Salts. Materials (Basel) 2016; 9:E878. [PMID: 28773998 DOI: 10.3390/ma9110878] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/09/2016] [Revised: 10/12/2016] [Accepted: 10/23/2016] [Indexed: 11/16/2022]
Abstract
The lack of a standard test method for evaluating the resistance of pervious concrete to cycles of freezing and thawing in the presence of deicing salts is the motive behind this study. Different sample size and geometry, cycle duration, and level of submersion in brine solutions were investigated to achieve an optimized test method. The optimized test method was able to produce different levels of damage when different types of deicing salts were used. The optimized duration of one cycle was found to be 24 h with twelve hours of freezing at −18 °C and twelve hours of thawing at +21 °C, with the bottom 10 mm of the sample submerged in the brine solution. Cylinder samples with a diameter of 100 mm and height of 150 mm were used and found to produce similar results to 150 mm-cubes. Based on the obtained results a mass loss of 3%–5% is proposed as a failure criterion of cylindrical samples. For the materials and within the cycles of freezing/thawing investigated here, the deicers that caused the most damage were NaCl, CaCl2 and urea, followed by MgCl2, potassium acetate, sodium acetate and calcium-magnesium acetate. More testing is needed to validate the effects of different deicers under long term exposures and different temperature ranges.
Collapse
|
24
|
Abstract
Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.
Collapse
Affiliation(s)
- Roger Bostelman
- National Institute of Standards and Technology, Engineering Laboratory, Intelligent Systems Division, 100 Bureau Drive, MS8230, Gaithersburg, MD 20899.,IEM, Le2i, Université de Bourgogne, BP 47870, 21078 Dijon, France
| | - Tsai Hong
- National Institute of Standards and Technology, Engineering Laboratory, Intelligent Systems Division, 100 Bureau Drive, MS8230, Gaithersburg, MD 20899
| | - Steven Legowik
- National Institute of Standards and Technology, Engineering Laboratory, Intelligent Systems Division, 100 Bureau Drive, MS8230, Gaithersburg, MD 20899
| |
Collapse
|
25
|
Xu Y, Han J, Lin H, An L. Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics. Regen Biomater 2015; 2:239-44. [PMID: 26816646 PMCID: PMC4676327 DOI: 10.1093/rb/rbv020] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2015] [Revised: 09/23/2015] [Accepted: 09/24/2015] [Indexed: 11/13/2022] Open
Abstract
Clinically, fractures are the main cause of computer-aided design and computer-aided manufacturing (CAD/CAM) 3 mol%-yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) all-ceramic dental restorations failure because of repetitive occlusal loading. The goal of this work is to study the effect of test methods and specimen's size on the flexural strength of five ceramic products. Both bi-axial flexure test (BI) and uni-axial flexure tests (UNI), including three-point flexure test (3PF) and four-point flexure test (4PF), are used in this study. For all five products, the flexural strength is as follows: BI > 3PF > 4PF. Furthermore, specimens with smaller size (3PF-s) have higher values than the bigger ones (3PF). The difference between BI and UNI resulted from the edge flaws in ceramic specimens. The relationship between different UNI (including 3PF-s, 3PF and 4PF) can be explained according to Weibull statistical fracture theory. BI is recommended to evaluate the flexural strength of CAD/CAM Y-TZP dental ceramics.
Collapse
Affiliation(s)
- Yongxiang Xu
- Department of Dental Materials, Peking University School and Hospital of Stomatology, Beijing 100081, China;; National Engineering Laboratory for Digital and Material Technology of Stomatology, Peking University School and Hospital of Stomatology, Beijing 100081, China
| | - Jianmin Han
- Department of Dental Materials, Peking University School and Hospital of Stomatology, Beijing 100081, China;; National Engineering Laboratory for Digital and Material Technology of Stomatology, Peking University School and Hospital of Stomatology, Beijing 100081, China
| | - Hong Lin
- Department of Dental Materials, Peking University School and Hospital of Stomatology, Beijing 100081, China;; National Engineering Laboratory for Digital and Material Technology of Stomatology, Peking University School and Hospital of Stomatology, Beijing 100081, China
| | - Linan An
- Department of Materials Science and Engineering, Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL 32816, USA
| |
Collapse
|
26
|
Abstract
OBJECTIVE In 2012 in the United States, pedestrian injuries accounted for 3.3% of all traffic injuries but, disproportionately, pedestrian fatalities accounted for roughly 14% of traffic-related deaths (NHTSA 2014 ). In many other countries, pedestrians make up more than 50% of those injured and killed in crashes. This research project examined driver response to crash-imminent situations involving pedestrians in a high-fidelity, full-motion driving simulator. This article presents a scenario development method and discusses experimental design and control issues in conducting pedestrian crash research in a simulation environment. Driving simulators offer a safe environment in which to test driver response and offer the advantage of having virtual pedestrian models that move realistically, unlike test track studies, which by nature must use pedestrian dummies on some moving track. METHODS An analysis of pedestrian crash trajectories, speeds, roadside features, and pedestrian behavior was used to create 18 unique crash scenarios representative of the most frequent and most costly crash types. For the study reported here, we only considered scenarios where the car is traveling straight because these represent the majority of fatalities. We manipulated driver expectation of a pedestrian both by presenting intersection and mid-block crossing as well as by using features in the scene to direct the driver's visual attention toward or away from the crossing pedestrian. Three visual environments for the scenarios were used to provide a variety of roadside environments and speed: a 20-30 mph residential area, a 55 mph rural undivided highway, and a 40 mph urban area. RESULTS Many variables of crash situations were considered in selecting and developing the scenarios, including vehicle and pedestrian movements; roadway and roadside features; environmental conditions; and characteristics of the pedestrian, driver, and vehicle. The driving simulator scenarios were subjected to iterative testing to adjust time to arrival triggers for the pedestrian actions. This article discusses the rationale behind creating the simulator scenarios and some of the procedural considerations for conducting this type of research. CONCLUSIONS Crash analyses can be used to construct test scenarios for driver behavior evaluations using driving simulators. By considering trajectories, roadway, and environmental conditions of real-world crashes, representative virtual scenarios can serve as safe test beds for advanced driver assistance systems. The results of such research can be used to inform pedestrian crash avoidance/mitigation systems by identifying driver error, driver response time, and driver response choice (i.e., steering vs. braking).
Collapse
|
27
|
Tosin M, Weber M, Siotto M, Lott C, Degli Innocenti F. Laboratory test methods to determine the degradation of plastics in marine environmental conditions. Front Microbiol 2012; 3:225. [PMID: 22737147 PMCID: PMC3380294 DOI: 10.3389/fmicb.2012.00225] [Citation(s) in RCA: 82] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2012] [Accepted: 06/01/2012] [Indexed: 12/01/2022] Open
Abstract
In this technology report, three test methods were developed to characterize the degradation of plastic in marine environment. The aim was to outline a test methodology to measure the physical and biological degradation in different habitats where plastic waste can deposit when littered in the sea. Previously, research has focused mainly on the conditions encountered by plastic items when floating in the sea water (pelagic domain). However, this is just one of the possible habitats that plastic waste can be exposed to. Waves and tides tend to wash up plastic waste on the shoreline, which is also a relevant habitat to be studied. Therefore, the degradation of plastic items buried under sand kept wet with sea water has been followed by verifying the disintegration (visual disappearing) as a simulation of the tidal zone. Most biodegradable plastics have higher densities than water and also as a consequence of fouling, they tend to sink and lay on the sea floor. Therefore, the fate of plastic items lying on the sediment has been followed by monitoring the oxygen consumption (biodegradation). Also the effect of a prolonged exposure to the sea water, to simulate the pelagic domain, has been tested by measuring the decay of mechanical properties. The test material (Mater-Bi) was shown to degrade (total disintegration achieved in less than 9 months) when buried in wet sand (simulation test of the tidal zone), to lose mechanical properties but still maintain integrity (tensile strength at break = -66% in 2 years) when exposed to sea water in an aquarium (simulation of pelagic domain), and substantially biodegrade (69% in 236 days; biodegradation relative to paper: 88%) when located at the sediment/sea water interface (simulation of benthic domain). This study is not conclusive as the methodological approach must be completed by also determining degradation occurring in the supralittoral zone, on the deep sea floor, and in the anoxic sediment.
Collapse
Affiliation(s)
- Maurizio Tosin
- Laboratory of Biodegradation, Ecology of Products and Environmental CommunicationNovamont S.p.A., Novara, Italy
| | - Miriam Weber
- HYDRA Field Station/Centro Marino ElbaCampo nell’Elba, Livorno, Italy
| | - Michela Siotto
- Laboratory of Biodegradation, Ecology of Products and Environmental CommunicationNovamont S.p.A., Novara, Italy
| | - Christian Lott
- HYDRA Field Station/Centro Marino ElbaCampo nell’Elba, Livorno, Italy
| | - Francesco Degli Innocenti
- Laboratory of Biodegradation, Ecology of Products and Environmental CommunicationNovamont S.p.A., Novara, Italy
| |
Collapse
|
28
|
Chiara F. Ferraris. Measurement of the Rheological Properties of High Performance Concrete: State of the Art Report. J Res Natl Inst Stand Technol 1999; 104. [ DOI: 10.6028/jres.104.028] [Citation(s) in RCA: 19] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 06/16/1999] [Indexed: 06/04/2023]
Abstract
The rheological or flow properties of concrete in general and of high performance concrete (HPC) in particular, are important because many factors such as ease of placement, consolidation, durability, and strength depend on the flow properties. Concrete that is not properly consolidated may have defects, such as honeycombs, air voids, and aggregate segregation. Such an important performance attribute has triggered the design of numerous test methods. Generally, the flow behavior of concrete approximates that of a Bingham fluid. Therefore, at least two parameters, yield stress and viscosity, are necessary to characterize the flow. Nevertheless, most methods measure only one parameter. Predictions of the flow properties of concrete from its composition or from the properties of its components are not easy. No general model exists, although some attempts have been made. This paper gives an overview of the flow properties of a fluid or a suspension, followed by a critical review of the most commonly used concrete rheology tests. Particular attention is given to tests that could be used for HPC. Tentative definitions of terms such as workability, consistency, and rheological parameters are provided. An overview of the most promising tests and models for cement paste is given.
Collapse
|
29
|
Mountfort K, Kelly J, Jickells SM, Castle L. A Critical Comparison of Four Test Methods for Determining Overall and Specific Migration from Microwave Susceptor Packaging. J Food Prot 1996; 59:534-540. [PMID: 31159060 DOI: 10.4315/0362-028x-59.5.534] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Four approaches for testing for overall migration and specific chemical migration from microwave susceptors were evaluated. The methods used olive oil as a conventional liquid food simulant, a semisolid simulant of olive oil and water absorbed onto diatomaceous earth, Tenax™ as a dry simulant, and compositional analysis of the susceptor by ASTM methods. The different methods were tested on five susceptor types used for the packaging of pizza, potato chips (French fries), pasty, popcorn, and a curry. For the comparison, the susceptor materials were impregnated with model substances as migration markers covering a range of molecular weight, volatility and polarity. Levels of specific migration (SM) and overall migration (OM) were determined using the four test methods, which were then evaluated on the basis of their ease and reproducibility of use along with the agreement between specific migration levels into simulants compared with migration into foods. There were severe problems with olive oil as a conventional liquid simulant as it was absorbed by the susceptor and made SM and OM measurements difficult. Humidity conditioning the susceptor for OM was a further difficulty with olive oil. Oil absorption was also a problem using the semisolid simulant, with OM being untried using this approach. The ASTM methods were found to be time-consuming, although the results for SM were similar to those obtained for foods. Overall, however, using Tenax was the preferred method for migration testing of susceptors. It allowed easy measurement of both OM and SM. SM values were generally much higher than for foods, however, and a reduction factor would be required for control of regulated ingredients. For other substances, such as thermal degradation products, a threshold of regulation approach applied to the Tenax extract would be a simple and effective control measure.
Collapse
Affiliation(s)
- Katrina Mountfort
- Ministry of Agriculture, Fisheries and Food, CSL Food Science Laboratory, Norwich Research Park, Colney, Norwich NR4 7UQ, UK
| | - Janet Kelly
- Ministry of Agriculture, Fisheries and Food, CSL Food Science Laboratory, Norwich Research Park, Colney, Norwich NR4 7UQ, UK
| | - Sue M Jickells
- Ministry of Agriculture, Fisheries and Food, CSL Food Science Laboratory, Norwich Research Park, Colney, Norwich NR4 7UQ, UK
| | - Laurence Castle
- Ministry of Agriculture, Fisheries and Food, CSL Food Science Laboratory, Norwich Research Park, Colney, Norwich NR4 7UQ, UK
| |
Collapse
|