Phosphorus recovery and leaching of trace elements from incinerated sewage sludge ash (ISSA)

Chemical extraction of phosphorus (P) from incinerated sewage sludge ash (ISSA) is adversely influenced by co-dissolution of metals and metalloids. This study investigated P recovery and leaching of Zn, Cu, Pb, As and Ni from ISSA using inorganic acids (sulphuric acid and nitric acid), organic acids (oxalic acid and citric acid), and chelating agents (ethylenediaminetetraacetic acid (EDTA) and ethylene diamine tetramethylene phosphonate (EDTMP)). The aim of this study was to optimize a leaching process to recover P-leachate with high purity for P fertilizer production. The results show that both organic and inorganic acids extract P-containing phases but organic acids leach more trace elements, particularly Cu, Zn, Pb and As. Sulphuric acid was the most efficient for P recovery and achieved 94% of total extraction under the optimal conditions, which were 2-h reaction with 0.2 mol/L H₂SO₄ at a liquid-to-solid ratio of 20:1. EDTA extracted only 20% of the available P, but the leachates were contaminated with high levels of trace elements under optimum conditions (3-h reaction with EDTA at 0.02 mol/L, pH 2, and liquid-to-solid ratio of 20:1). Therefore, EDTA was considered an appropriate pre-treatment agent for reducing the total metal/metalloid content in ISSA, which produced negligible changes in the structure of ISSA and reduced contamination during subsequent P extraction using sulphuric acid.

Digestion of titanium bearing geologic materials involving microwaves

An environmentally friendly and rapid digestion procedure involving 10 mL of acid mixture (HNO3 : HCl : HF = 2:2:1) for 0.1 g of sample in closed vessel microwave digester following heating program : 250W for 10 min., hold time 2 min., 600 W for 17 min, and Ventilation time 10 min was developed. The operating parameters were varied and optimized by factorial design approach using "Steepest Ascent" method. The validity of the recommended digestion procedure were examined by analyzing several well characterized standard reference materials such as diabase (W2), basalt (BIR-1, JB-3, BHVO-1), granite (G2), gabbro (JGb-1), Mn-nodule (Nod-A-1, Nod-P-1), sediment (STSD-4, LKSD-2), limestone (KH-2), soil (SAu-1), ilmenite (IGS-31), rutile (IGS-32), Zircon (IGS-35) and titanium dioxide (SRM-154b) employing both inductively coupled plasma-atomic emission spectrometry (ICP-AES) and well known spectrophotometric method. An excellent agreement between the methods and the certified values of standard reference materials suggest that the digestion procedure can be used for quality control and allied purposes.

A RAPID METHOD FOR THE DETERMINATION OF SODIUM IN SERUM

A colorimetric method for the determination of serum sodium is described in which sodium is precipitated from the deproteinized serum by uranyl zinc acetate under conditions chosen to minimize the time required. After washing, the precipitate is taken up in water and the amount of color developed on the addition of sodium salicylate is measured.

Reactions of atomic sodium

The reactions of atomic sodium with organic halides are briefly reviewed, with particular reference to the subsequent reactions of the free radicals formed. New values are reported for the rate constants of the reactions of atomic sodium with vinyl chloride and vinyl bromide. The formation of sodium hydride is shown to be important when hydrogen is used as the carrier gas. Vinyl radicals react with hydrogen to give ethylene. Acetylene and ethylene are formed by a disproportionation reaction.