Application of vibrational and fluorescence spectroscopy to the compositional analysis of colored-flesh potatoes

BACKGROUND

Determination of composition and physicochemical parameters of natural products requires dedicated, often laborious and expensive, analytical protocols. Different spectroscopic techniques, in conjunction with chemometrics, seem to have a considerable potential in direct analysis of raw plant material and foods, without any chemical treatment.

RESULTS

Fluorescence spectroscopy and three vibrational spectroscopy techniques were applied to determine total polyphenol content, antioxidant activity and macronutrient levels in red- and purple-fleshed potato varieties. Excitation-emission matrix fluorescence, Fourier transform Raman, attenuated total reflection Fourier transform infrared and near-infrared spectra were recorded for the freeze-dried samples. Combining spectral data and the results of reference analyses, partial least squares regression models were constructed for each parameter studied. For polyphenols and antioxidant activity, quantification errors found for validation samples amounted to 3.74-5.04% and 4.75-6.35%, respectively, whereas macronutrient analysis gave errors in the 3.45-4.55%, 3.09-5.30% and 5.10-8.58% ranges for starch, protein and sugar determinations, respectively.

CONCLUSION

The obtained results demonstrate that different spectroscopic techniques in combination with multivariate modeling allow simultaneous determination of various parameters of plant samples based on a single sample spectrum. They can effectively replace commonly used protocols of food product analysis requiring sample dissolving and extraction of the compounds of interest. © 2023 Society of Chemical Industry.

Physicochemical parameters, sensory profile and concentration of volatile compounds and anthocyanins in beers brewed using potato variety with purple flesh

In the recent years, beer brewers are experimenting with using various substrates, other than traditional barley malt, water, hops, and yeast for beer production, because new adjuncts to the beer brewing can add new sensory and functional properties to this beverage. Novel potatoes with purple or red-colour flesh are a good and cheap starch source and are rich in bioactive components, which could increase the nutritive value of the produced beer. The aim of the study was to determine whether some part of barley malt can be replaced by the potatoes of purple-colour flesh and assessment of properties of such beer. Beer samples showed increased antioxidant activity, higher concentration of anthocyanins and polyphenol compounds, as well as modified composition of volatiles and lower ethanol content. Beer produced with the addition of 30% of purple potatoes showed acceptable organoleptic qualities in the sensory analysis.

Quality and nutritional value of cookies enriched with plant-based protein preparations

BACKGROUND

The objective of the study was to determine the effect of addition of plant-based protein preparations in cookie recipes on the quality and nutritional value of the obtained products. Wheat flour was replaced by 10%, 20% or 30% of pea, hemp seed, pumpkin and sunflower seed preparations. Baked cookies were analysed for chemical composition, amino acid profile, colour and texture as well as organoleptic attributes and overall acceptability.

RESULTS

The addition of plant protein preparations improved the nutritional value of cookies by supplementing them with threonine and part of lysine. Replacing at least 20% of wheat flour with pea protein allowed the production of cookies with a well-balanced amino acid profile. The use of pea and sunflower proteins improved the appearance of the obtained products (consumer notes from 7.4 to 8.0) in comparison to the control sample (note 7.2). The physical properties of cookies were changed while organoleptic properties worsened. Cookies with the most desirable sensory values were obtained using the pea protein preparation. Acceptable cookies were also obtained with pumpkin and sunflower seed protein preparations, if the proportion of additive did not exceed 20% in relation to the amount of wheat flour.

CONCLUSION

The use of protein preparations from pumpkin and sunflower as well as from hemp seeds allows the production of cookies with acceptable sensory characteristics that could diversify the range of cookie products. In the case of oilseed preparations, the amount of additive is limited primarily by the colour and taste of the finished products. © 2022 Society of Chemical Industry.

Microbiological and Physicochemical Composition of Various Types of Homemade Kombucha Beverages Using Alternative Kinds of Sugars

Kombucha is a beverage made by fermenting sweetened tea with a symbiotic culture of yeast and bacteria. Literature data indicate that the kombucha beverage shows many health-promoting properties such as detoxification, chemo-preventive, antioxidant, antimicrobial, antifungal, and general strengthening. The research conducted focuses on the analysis of polyphenolic compounds formed in the fermentation process using ultra-efficient liquid chromatography, as well as on checking the antimicrobial properties of kombucha against pathogenic bacteria and yeasts found in food. Analysis of the composition of the tea mushroom (SCOBY) microflora using the MALDI TOF MS Biotyper mass spectrometer showed 8 species of bacteria and 7 species of yeasts. In vitro studies confirm the bactericidal and bacteriostatic properties of fermented kombucha beverages, with white and green tea beverages showing the highest antibacterial activity. The bacteria Staphylococcus aureus and yeast Candida albicans were the most sensitive to the effects of kombucha tea beverages. UPLC chromatographic analysis confirmed the presence of 17 bioactive compounds in kombucha beverages that can affect human health. The analyses conducted were aimed at indicating the best recipe and conditions to prepare a kombucha beverage, which allowed the selection of the version with the best health-promoting properties. Fermented kombucha teas contain many elements such as aluminium, calcium, iron, potassium, magnesium, sodium, phosphorus, and sulphur.

Comparative evaluation of the antioxidant, antimicrobial and nutritive properties of gluten-free flours

Gluten-free flours are interesting alternative to wheat flours. They could be by-products of oilseed processing, characterized by high content of bioactive compounds. Therefore the aim of the study was to determine the antioxidant, antimicrobial properties, amino acid and fatty acid profile of flours obtained as by-products from the oil industry. The highest total polyphenol content and antioxidant activity was found to have evening primrose flour. The widest spectrum of microbial growth inhibition was indicated for corn germ extract which showed no antimicrobial activity only against Bacillus subtilis. The highest protein content was found in pumpkin, peanut and almond flours (more than 50 g/100 g). The major abundant amino acids in all the analysed oilseed cake flours were aspartic acid, glutamic acid and arginine. The analysed gluten-free flours were found to be a good source of polyunsaturated fatty acids (PUFAs), which comprised mainly linoleic acid and α-linolenic acid, whereas the best source of PUFAs was evening primrose flour. The results suggest that the cold-pressed seed flours possess valuable chemical composition and may be considered for improvement of the nutritional properties of food products.

Characterization of Bioactive Compounds of Opuntia ficus-indica (L.) Mill. Seeds from Spanish Cultivars

Opuntia ficus-indica (L.) Mill. is the Cactaceae plant with the greatest economic relevance in the world. It can be used for medicinal purposes, animal nutrition, production of biofuels and phytoremediation of soils. Due to its high content of bioactive compounds, the prickly pear has antioxidant, antimicrobial and anticancer properties. The aim of this study was to determine the polyphenolic, fatty acid and amino acid profile and characterize the antioxidant capacity of seeds of seven Spanish prickly pear cultivars. A total of 21 metabolites, mainly phenolic acids and flavonols, were identified using ultraperformance liquid chromatography photodiode detector quadrupole/time-of-flight mass spectrometry (UPLC-PDA-Q/TOF-MS). Significant differences were found in the phenolic concentrations of the investigated varieties. The highest amount of phenolic compounds (266.67 mg/kg dry matter) were found in the "Nopal espinoso" variety, while the "Fresa" variety was characterized by the lowest content (34.07 mg/kg DM) of these compounds. In vitro antioxidant capacity was positively correlated with the amount of polyphenols. The amino acid composition of protein contained in prickly pear seeds was influenced by the variety. Glutamic acid was the predominant amino acid followed by arginine, aspartic acid and leucine, independent of prickly pear variety. Overall, 13 different fatty acids were identified and assessed in prickly pear seeds. The dominant fatty acid was linoleic acid, with content varying between 57.72% "Nopal ovalado" and 63.11% "Nopal espinoso".

Monitoring of glycidyl fatty acid esters in refined vegetable oils from retail outlets by LC-MS

BACKGROUND

Glycidyl fatty acid esters (GEs) are a newly identified class of food process contaminants. The main source of these compounds is refined oils. Because of the potential release of free glycidol, it is necessary to enable a more accurate exposure assessment. In this study a method based on liquid chromatography-single-quadrupole mass spectrometry was used for the analysis of GEs in refined vegetable oils from retail outlets in Poland.

RESULTS

The amount of GEs detected in 20 edible oils ranged from 0.00 to 44.33 mg kg(-1) . Refined palm oils exhibited a several times higher contamination ratio in comparison with other oils (average 31.24 mg kg(-1) ). The average content of esters in sunflower oils (2.46 mg kg(-1) ) was higher than in rapeseed oils (1.04 mg kg(-1) ). C18:2-GE was found to be the prevailing GE in sunflower oil, with the highest concentration in all studied samples, while C18:1-GE was the prevailing GE in rapeseed and palm oils. No trace of C18:3-GE was found in the analysed oils.

CONCLUSION

The concentrations of major GEs were correlated with the fatty acid composition of the oils. The GE content varied with the type of oil and the producer. The tested oils had a higher or similar GE content compared with those analysed by other researchers. © 2015 Society of Chemical Industry.

The effect of pan frying on thermooxidative stability of refined rapeseed oil and professional blend

The pan fryings of frozen pre-fried French fries in refined rapeseed oil (RO) and professional blend (PB) were of 8 h duration. Initially, while fresh, and after every 1 h of frying, the oils were analyzed for acid and anisidine values, colour, refractive index, fatty acid composition (by GC), polar fraction content and composition (by high pressure size exclusion chromatography). Additionally the fat content and fatty acid composition of French fries were determined. Hydrolytic and oxidative changes in the frying media varied with oil composition and increased with frying time. The pace of oxidation in RO was three times higher than in PB. The loss of polyunsaturated fatty acids (sum of C18:2 and C18:3) after 8 h of frying was 7 % in PB and 20 % in RO. The polar fraction content was two times lower in PB, but did not exceed 25 % in either of the frying media. The predominant fraction in RO was oxidized triacylglycerols, while in PB - diacylglycerols. During frying the proportions of triacylglycerol polymers and dimers increased in both oils, reaching 32 % in RO and 23 % in PB.

Chemical composition and properties of spray-dried sugar beet concentrate obtained after ultrafiltration of diffusion juice

Ultrafiltration of diffusion juice is a method that can reduce environmental pollution during the production of sugar. A by-product (concentrate) of ultrafiltration contains a large amount of sucrose, but due to its properties, it is difficult to manage. The aim of this study was to determine the effects of the temperature used during drying of diffusion juice concentrates on the content of certain components and characteristics of resultant preparations. Diffusion juice obtained from one of the Polish sugar plants was subjected to ultrafiltration and the obtained concentrates were dried in a spray dryer. In the dried samples, the following parameters were analyzed: dry mass, sucrose, total ash, protein, crude fiber and color. It has been declared that the degree of concentration and drying temperature influenced the chemical composition and the properties of the dehydrated diffusion juice concentrates. An increase in drying temperature was accompanied by the increased content of dry mass, protein, ash and fiber content in the preparations. The greater the degree of juice concentration, the greater was the content of dry mass, ash, and fiber. Inversely, the greater the degree of juice concentration, the lower the content of sucrose. The brightest color of the dehydrated product was observed at the drying temperature of 200°C. Spray-drying may be used for waste management after the diffusion juice membrane filtration, and the resultant preparations might be used in the production of feedstuff or food industry in general e.g. as sucrose source, in fermentation processes or in microorganisms propagation.

Anthocyanin and antioxidant activity of snacks with coloured potato

Coloured-fleshed potatoes of four varieties were used as raw material for coloured flour and fried snack production. The effects of thermal processes traditionally used in dried potato processing and in snack pellet manufacturing on anthocyanin profiles, total polyphenols and antioxidant properties of obtained half- and ready products were studied. There was a significant influence of potato variety on the experimental flour and snack properties. Flours with the highest antioxidant activities were obtained from Salad Blue and Herbie 26 potatoes; however, the flour prepared from the Blue Congo exhibited a much higher total polyphenol and anthocyanin content. Snacks produced with coloured flour had 2-3 times higher antioxidant activities, 40% higher contents of polyphenols, attractive colour and better expansion compared to control samples. The lowest losses of anthocyanins during snack processing were in snacks with flour from the purple-fleshed Blue Congo and red-fleshed Herbie 26.

Improving the properties of fodder potato protein concentrate by enzymatic hydrolysis

Protein hydrolysates of profitable properties were prepared from the fodder potato protein concentrate. The hydrolysis process was performed with the use of commercial available enzyme (Alcalase) over a 2 and 4 h incubation period. Chemical and amino acid composition as well as functional properties of resultant hydrolysates were determined. A 2 h long process occurred profitable to obtain preparations of well balanced amino acid composition as well as proved functional properties. The industrial preparation, modified within proteolytic enzyme, totally soluble (average 98%), was characterised by fivefold higher oil holding capacity (average 5.4 cm(3)/g) and much better foam capacity (more than 150%) as compared to the material underwent modification (13.00%, 2.1 cm(3)/g and 5.33%, respectively). Presented results suggested potential use of fodder potato protein not destined directly for food purposes as the suitable product for preparations characterised by high nutritive value and functional properties.

Gender differences in the incidence and progression of diabetic retinopathy among Japanese patients with type 2 diabetes mellitus: a clinic-based retrospective longitudinal study

A clinic-based retrospective longitudinal study conducted for 5.8 ± 2.5 years, including 383 (M/F 245/138) Japanese patients with type 2 diabetes mellitus showed that females exhibit a significantly higher prevalence of proliferative diabetic retinopathy (DR) at baseline and that female gender is an independent risk factor for the development of DR.

Biomass production by novel strains of Yarrowia lipolytica using raw glycerol, derived from biodiesel production

This study demonstrated the potential applicability of the isolated strains of Yarrowia lipolytica for the valorization of glycerol waste generated during biodiesel production, throughout biomass production. Twenty-one strains were isolated from different environments and identified as Y. lipolytica. Biomass production from pure glycerol (25 g L(-1)) was performed in the shake-flasks experiment. Eight strains with the best biomass production ability were chosen for studies in bioreactor (pH 3.5). The analysis of technological process parameters and biomass chemical composition demonstrated that S6 strain was the most suitable for biomass production. Its application allowed obtaining 11.7 and 12.3 g L(-1) of the biomass with 1.30 and 1.37 g L(-1) h(-1) productivity, respectively when pure and raw glycerol (25 g L(-1)) was used. In the yeast protein amino acid profile the contents of lysine, threonine and phenylalanine/tyrosine were higher than required by FAO/WHO. According to the EAAI, the nutritional value of the biomass reached up to 72.3%.

Characteristics of antioxidant activity and composition of pumpkin seed oils in 12 cultivars

The objective of this study was to determine the antioxidant properties, and provide characteristics, of the oil obtained from the seeds of 12 pumpkin varieties belonging to the species Cucurbita maxima Duch. and Cucurbita pepo L. Another objective was to establish which of the two extracting agents, ethanol or methanol, is more effective. The seeds of the pumpkin varieties examined differ in chemical composition and antioxidant activity. The seeds of the cultivars belonging to the species C. maxima are characterised by a higher content of fatty acids than are the cultivars of the species C. pepo. In the seed oil, unsaturated acids are dominant (oleic and linoleic), and their proportion depends on the pumpkin variety. The highest content of unsaturated acids has been measured in the oil extracted from the seeds of the cultivar, Jet F1 (C. pepo). Antioxidant activity analysis has produced the following findings. The seeds of the pumpkin varieties that belong to the species C. pepo exhibit better antioxidant properties, regardless of the extraction solvent used. 50% ethanol is more efficient than 80% methanol when used as an extracting agent. The antioxidant activity values obtained with 50% ethanol are higher than those achieved with 80% methanol. Owing to the considerable differences in composition among the fatty acids examined, it is possible to choose the desired pumpkin variety for the intended use.

Multi-element analysis of mineral and trace elements in medicinal herbs and their infusions

Twelve mineral and trace elements (Al, B, Ba, Fe, Zn, Mn, Mg, K, Na, P, Cu, Sr, and Ca) were determined in the herbs and their infusions consumed for medical purposes in Poland such as chamomile (Matricaria chamomilla L.), peppermint (Mentha xpiperita), melissa (Melissa officinalis), sage (Salvia officinalis), nettle (Urtica dioica), linden (Tilia vulgaris) and St. John's wort (Hypericum calycinum). Dry digestion procedure for total concentration and wet digestion procedure for infusions were applied under optimized conditions for dissolution of medicinal herbs. Element concentrations in herbs and their infusions were determined by ICP-OES. The accuracy and precision were verified against NCS DC 73349 - bush branches and leaves certified reference material. The result of total concentrations of elements in herb leaves shows that all herbs contain most of the elements, except K and P, in the μg/g range, and that elemental concentrations varied widely. Moreover, on the basis of experimental results for the extraction efficiencies, the elements in herb infusions were classified into three specific groups: highly-extractable (>55%) including K; moderately-extractable (20-55%) including Mg, Na, P, B, Zn and Cu and poorly-extractable (<20%) including Al, Fe, Mn, Ba, Ca and Sr. The results of analysis were evaluated statistically using ANOVA one-way and three-way analysis of variance, variance correlation test and Spearman's test.

Nondestructive analysis of single crystals of selenide spinels by X-ray spectrometry techniques

The paper presents possibilities and difficulties in nondestructive analysis of small multielement single crystals performed by means of X-ray spectrometry techniques: micro-X-ray fluorescence spectrometry (μ-XRF), energy-dispersive electron probe microanalysis (ED-EPMA), and X-ray photoelectron spectroscopy (XPS). The capability of the X-ray spectroscopy techniques in elemental analysis is demonstrated with the single crystals of selenide spinels of the general formula M_xN_yCr_zSe₄ (M⁺² and N⁺³ are, for example, Zn⁺², V⁺³, Ga⁺³, Cd⁺², In⁺³, and Sb⁺³). The results of the nondestructive analyses (μ-XRF, ED-EPMA, and XPS) are compared with those obtained by inductively coupled plasma optical emission spectrometry (ICP-OES) and wavelength-dispersive X-ray spectrometry (WDXRF) following sample digestion. The present study shows satisfactory agreement between the results of μ-XRF analysis performed using the standardless fundamental parameter method and the results obtained with the WDXRF and ICP-OES analyses. If the measured single crystal is precisely positioned, the difference between μ-XRF and wet analysis (WDXRF and ICP-OES) does not exceed 5% rel. The reliable results of ED-EPMA can be obtained only if the measured area is sufficiently large, i.e., of 200 × 300 μm. Even if this condition is fulfilled, the relative difference between the ED-EPMA and the wet analysis may reach 10% rel. In case of the XPS analysis, the accuracy of results depends on the proper preparation of the sample surface. It should be free of contamination that can be obtained by scraping in situ in ultrahigh vacuum. The ion etching, commonly used for cleaning the surface, leads to preferential sputtering; therefore, the reliable results cannot be obtained.

Figure

Marked anti-tumour activity of the combination of YM155, a novel survivin suppressant, and platinum-based drugs

BACKGROUND

Survivin, a member of the inhibitor of apoptosis protein family, is an attractive target for cancer therapy. We have now investigated the effects of the combination of YM155, a novel small-molecule inhibitor of survivin expression, and platinum compounds (cisplatin and carboplatin) on human non-small cell lung cancer (NSCLC) cell lines.

METHODS

The anti-cancer efficacy of YM155 in combination with platinum compounds was evaluated on the basis of cell death and progression of tumour xenografts. Platinum compound-induced DNA damage was evaluated by immunofluorescence analysis of histone gamma-H2AX.

RESULTS

Immunofluorescence analysis of histone gamma-H2AX showed that YM155 delayed the repair of double-strand breaks induced in nuclear DNA by platinum compounds. The combination of YM155 and platinum compounds also induced synergistic increases both in the number of apoptotic cells and in the activity of caspase-3. Finally, combination therapy with YM155 and platinum compounds delayed the growth of NSCLC tumour xenografts in nude mice to an extent greater than that apparent with either treatment modality alone.

CONCLUSION

These results suggest that YM155 sensitises tumour cells to platinum compounds both in vitro and in vivo, and that this effect is likely attributable to the inhibition of DNA repair and consequent enhancement of apoptosis.