Sexual dimorphism in the Japanese cranial base: a Fourier-wavelet representation

An approach, computational shape analysis (CSA), is presented here which utilizes a Fourier-wavelet representation to numerically describe shape features of biological forms. Two elements are involved: 1) elliptical Fourier functions (EFFs), to provide estimates of global aspects, and 2) continuous wavelet transforms (CWTs) to generate an objective estimate of localized features. EFFs are computed, using a set of pseudohomologous points, to create a precise analog of the boundary. This computed contour is then normalized by scaling and rotated in two-dimensional space to insure a representation that is invariant with respect to starting point, size, and orientation. The predicted point coordinates derived from the EFFs are submitted to CWT for further processing. Wavelet coefficients are then computed to identify localized features, localization being a subjective process with EFFs. The advantage of wavelets is that they eliminate the inevitable subjectivity inherent in the choice of measurements. To test the usefulness of CSA, a sample of cranial base (CB) lateral radiographic outlines was available. Five archaeological periods, Yayoi, Kofun, Kamakura, Edo, and Modern, were utilized (n = 297). Statistically significant differences in sex and archaeological age were found. Although archaeological age differences were present, they were small and random in character, suggesting stability in the CB structures. In contrast, sexually dimorphic differences were present in every group from the Yayoi to the Modern period. This presence of sexually dimorphic differences in shape was consistent with earlier studies of M. nemestrina, G. gorilla, and P. troglodytes. Consequently, it is suggested that the pattern of sexual dimorphism documented in the Japanese CB is a primate pattern with an ancient evolutionary history. The results demonstrate, both visually and numerically, that CSA is a powerful approach for describing both global and localized features of craniofacial structures such as the CB.

Irritancy of scrubbing up for surgery with or without a brush

Hand washing is an indispensable procedure for surgical nurses. Although scrubbing up with a brush is preferable to prevent infections, it is not clear how irritating to the skin scrubbing with a brush is compared with hand washing without a brush. TEWL, high frequency conductance and pH were measured on the hand skin of the same group of nurses before and after daily hand washing for 11 days in different seasons, which were chosen as favourable and unfavourable periods for the condition of hand skin, namely the early summer and autumn. Additionally, we compared the antimicrobial effects on the skin of scrubbing up, using a palm stamp method. TEWL showed significantly higher values with brush washing than with simple hand washing only in the autumn. There was no significant difference in the measurement of high frequency conductance, pH or in the antimicrobial effects between the two washing techniques. Results showed the deleterious effects on the skin of hand washing, particularly that of using a brush in the cold season.

Morphological variation of the frontal sinus in Melanesian (Fiji) and Polynesian (Western Samoa) populations

The aims of this study were to investigate gender differences in frontal sinus morphology and to estimate differences between Fijian and Western Samoan populations. Cephalograms of 118 Fijians (59 male, 59 female), 80 W. Samoans (33 male, 47 female) and 89 Japanese (60 male, 29 female) were used in this study. The thickness of the frontal sinus and the convexity of glabella in males were found to be larger than those of females in each population. The angle of Sg-N-G in the Fijians was larger than that of the Western Samoans and Japanese. In order to compare the frontal sinus morphology among populations, Mahalanobis' generalized distances were calculated on the basis of the five distance diameters. The results indicate that gender is separated by the first axis which indicates the overall size. Japanese samples were separated from South Pacific samples by the second axis which indicates the shape factor. In populational discrimination, there was a higher percentage of correct discriminations of the females of the males. In conclusion, gender difference was recognized in the size of the frontal sinus, and the populational differences were shown in the shape factor between Melanesian and Polynesian populations, and also between South Pacific and Japanese populations.

Dental arch form in three Pacific populations: a comparison with Japanese and Australian aboriginal samples

The purpose of this study was to provide information about arch shape variations among South Pacific populations. The application of Fourier transforms, Y(phi i) = ao/2 + sigma (aicos phi i + bisin phi i) was used to separate two components of variation; size and shape. Dental arch size can be described by one coefficient (ao), while the shape can be summarized by the first three harmonics (amp1-3) in the Fourier series. The materials used in this study were dental casts of South Pacific populations (Fiji, Western Samoa and Kiribati), Australian Aboriginals and Japanese. Fijians, Western Samoans and Kiribati people have larger upper and lower dental arches than that of Japanese. These populations were separated by the arch size and first Fourier amplitudes which showed the arch depth/width ratio. The Fijian upper and lower dental arches were significantly larger than those found in other populations and was characterized by a wide posterior arch breadth. The Western Samoan and Kiribati arch shape was more similar to the Japanese arch shape than the Fijian. Distribution patterns of arch shape characteristics in these populations showed the same tendencies in the upper and lower arches.

Cephalometric analysis of masseter muscle and dentoskeletal morphology in dentate and edentulous humans

A study was done to clarify the attachment position of the superficial masseter muscle and its relationship with craniofacial morphology in dentate and edentulous subjects. Data were obtained from lateral cephalometric radiographs of a total of 39 cadavers in which the superficial masseter muscle had been defined with colloidal barium. Principal component analysis provided evidence that the lower masseter muscle width was associated with the size of the ramus, and related to the position of the anterior margin of the muscle. Linear discriminant function data suggested that ramus width, coronoid height and the distance between the anterior margin of the masseter muscle and the mandibular notch contributed most to the observed difference between dentate and edentulous subjects. The derived function correctly assigned 100% of dentate and 95% of edentulous subjects. The results of this study indicated that a reduction of masticatory function was associated with the position of the anterior border of the masseter muscle insertion and also with differences in ramus dimension, the most significant of which were differences in the coronoid process and gonial angle. In general, age was not a significant determinant of variation in superficial masseter muscle dimensions or orientation.

Relationship between maxillofacial morphology and morphological characteristics of vertical sections of the mandible obtained by CT scanning

A study was conducted to evaluate the relationship between morphological characteristics of vertical sections of the mandibular body and dentopfacial morphology. Cortical bone thickness, tooth inclination and bone inclination of the mandible were investigated. Among skeletal components, ANSMe distance was associated with the buccal cortical bone thickness of the P2 (second premolar) section. Gonial angle, SN to mandibular angle, and palatal to mandibular angle were negatively correlated with the buccal cortical bone thickness of P2 and M1 (first molar) sections. SNA and SNB which indicated the protrusion of the upper and lower jaws were positively correlated with the buccal cortical bone thickness of the M1 section. Among denture components, lower and upper incisor positions showed a significant negative correlation with the buccal cortical bone thickness of the P2 section. The interincisal angle was associated with the basal cortical bone thickness of the M2 (second molar) section. In summary, there were significant and complex relationships between the structures of the mandibular body and maxillofacial morphology. Facial types which relate to masticatory function are associated with the cortical bone thickness of the mandibular body.

Lip form responses to changes in maxillary incisor position

A study was conducted to assess the measurement accuracy of a laser three-dimensional measurement system for measuring facial profile and to investigate the changes in lower facial morphology caused by experimental protrusion of the upper incisors, and also to examine the relationship between the changes in lip form and lip thickness. The study subjects were 24 Japanese male dental students attending Nihon University School of Dentistry at Matsudo, who had normal overbite, overjet, and normal occlusion, and a good facial profile. The mean age was 23.2 years with a range of 21.5 to 25.8 years. Three-dimensional measurements obtained by a computerized 3D laser scanning system were used to evaluate facial morphology. The measurement error of this system was less than 0.5 mm in any three-dimensional linear measurements. The stability and reproducibility of the recording procedure were evaluated. The changes in facial morphology caused by orthodontic treatment and orthognathic surgery were visualized in any direction by this three-dimensional graphic system. Lip thickness was not associated with changes in lip form. However, a relationship between the right and left corners of lip and lip thickness was noted. With regard to the ratio of changes in hard tissue and lips, the value of the original position for a 4 mm protrusion was not the same as that for a 4-8 mm protrusion. Also, the correlation of the changes in both groups was very low. The changes in lip thickness were associated with changes in stomion position, which in turn were related to the vertical change in the upper lip.

Relationship between cranial base and maxillofacial morphology

The aims of this study were to investigate the relationships between the cranial base and maxillofacial morphology in Japanese crania, and to examine the differences between Class I and Class II samples. Data were obtained from 46 male Japanese crania from the collection of the Jikei University School of Medicine (Tokyo). The sample represents populations which would have lived during the last 100 years. A principal component analysis of linear and angular measurements showed that the anterior and posterior cranial base, and the cranial base angle were associated in different ways with different aspects of maxillofacial morphology. Variation in the anterior cranial base was associated with differences in facial height, lower facial height, bicondylar breadth, ramal height, and ramal width, while posterior cranial base length was correlated with bizygomatic breadth. The cranial base angle was negatively correlated with SNA (r = -0.46) and SNB (r = -0.59), and positively correlated with the palatal and occlusal plane angles. There were significant differences between Class I and Class II specimens in palatal width, SNA, ANB, and the palatal plane angle, but no significant difference in cranial base length or angle. The evidence suggested that cranial base shape and size was related to facial length, inclination of the maxilla, and both maxillary and mandibular prognathism.

Relationship between attachment of the superficial masseter muscle and craniofacial morphology in dentate and edentulous humans

Previous studies have described the importance of the interaction between the masticatory muscles and the craniofacial skeleton in the control of craniofacial growth. This study describes the attachment and orientation of the superficial masseter muscle and its relationship with craniofacial morphology in dentate and edentulous subjects. Data were obtained from lateral cephalometric radiographs of a total of 31 cadavers in which the superficial masseter muscle had been defined with liquid barium. The results provide evidence that the morphology of the superficial masseter muscle in the gonion region differed significantly between dentate and edentulous subjects, with the masseter being 2.7 mm wider and the gonion-anterior muscle border distance being 4.0 mm greater in dentate subjects. The complex relationship between craniofacial morphology and the dimensions and inclination of the superficial masseter muscle were most clearly evident in dentate subjects where the position of the anterior border was related to ramus dimensions and mandibular and occlusal plane angles. The association is much less clear in edentulous subjects where normal function was disturbed. In general, age was not a significant determinant of variation in superficial masseter muscle dimensions and orientation.

A principal component analysis of morphogenetic field in the root of Japanese dentition

Teeth extracted from Japanese male cadavers were analyzed from the morphogenetic point of view. Variables were buccolingual crown diameter, mesiodistal crown diameter, crown height, root length and total length. Each dimension was analyzed separately by means of principal component analysis with varimax rotation. Components extracted from crown dimensions and total length showed 3 or 4 of 5 underlying components for morphogenetic field, anterior group, molar, premolar, canine and incisor. However, for crown height and root length, the components were less distinct.

A quantitative investigation of irregular cuspules in human maxillary permanent molars

The frequency of occurrence of anomalous cusps or tubercles on human upper first molars was investigated in seven racial populations using moiré contourography, which permits the three-dimensional measurement of minute cusps. Tubercles on the mesial marginal ridge were more frequently found in Mongoloid populations (Japanese and Eskimo) than in others. The frequency of the protoconule was high in Eskimos and Negroids (Bantu and San). The lingual paracone tubercle (mesial cusp) showed a particularly high frequency in Australian aborigines. The metaconule was rare or absent in all of the populations. Caucasoid groups (Dutch White and Asiatic Indian) showed generally low frequencies of all these abnormal tubercles, especially the distal accessory cusp (C5). Racial differences in the frequencies of occurrence may offer a key to understanding the adaptive significance of these traits and human microevolution. Confusion in nomenclature for upper molar tubercles is also discussed.

[Three-dimensional measurement of the maxillary first molar in Australian whites]

The occlusal surfaces of upper first molars of Australian Whites were measured in three dimensions with the aid of moiré contourography. The dental casts had been collected from Australian White twins who were considered to be of European stock and the casts housed in the Department of Dentistry, The University of Adelaide, South Australia. In the present study, our first aim was to describe the three-dimensional features of occlusal surfaces of molars in Australian whites. One cast was selected from each monozygotic twin pair at random. A total of 24 males and 15 females were photographed. The results obtained in the present study were compared with those of other human populations previously reported. Cusp height of Australian Whites showed intermediate mean values among 8 populations, but mean intercuspal distances were smaller. This feature, such as small size of occlusal surface but relatively high cusps, also found in Dutch and Asiatic Indian. Mean cusp heights in this population of showed similar values between sexes. Mean differences were insignificant as in Asiatic Indian, Australian Aboriginals, and Bantu unlike the Mongoloid, Japanese and Eskimo populations, where there were significant sex differences in cusp heights. This sexual dimorphism in cusp height among human populations is discussed phylogenetically and functionally.

[TMJ clicking sounds and changes in masking level]

It is known that the peak distribution of the power spectrum seen in the clicking sounds of the temporomandibular joints appears in the vicinity of 1 KHz in a high rate. Based on the findings that this marginal zone corresponds to speech range, the authors have performed masking experiment by narrow band noise on 20 ears in 10 normal persons and 27 ears in 19 patients with noise as subjects to assess the influence exerted by mechanical stimulation on the condition of hearing ability in speech range. The results in normal persons were 14.8dB (S.D. 13.7) at 500Hz. 27.0dB (S.D. 11.1) at 1,000Hz and 21.3dB (S.D. 10.4) at 2,000Hz. The results in abnormal persons were 12.2dB (S.D. 9.9) at 500Hz, 20.6dB (S.D. 6.6) at 1,000Hz and 15.9dB (S.D. 4.4) at 2,000Hz. A significant difference was observed in the masking level between the two groups at 1,000Hz band with a risk rate of 5%. From the above, it was suggested that the sound constituent of TMJ clicking sound exerts influence on the specific auditory level in the patients with noise.

[Metrical study on teeth and mandible in Macaca fuscata fuscata. 2. Principal component analysis]

Metrical investigation on teeth and mandible together was performed to understand the morphological relationship between these two components in Macaca fuscata fuscata. Measurements are 9 items from the mandible, 2 items from dental arch, and 8 mesiodistal diameters from teeth. Correlation matrix composed of 19 items, in total, was examined in males and females, respectively. Significant correlation coefficients were frequently seen among mandibular measurements and also among tooth measurements, but rarely seen between mandibular and tooth measurements. The only exception was a mesiodistal diameter of P3 which has a few significant correlations with mandibular measurements. Principal component analysis was also carried out based on the correlation matrix of 19 measurements. The first component was a size factor in which factor loadings were all positive. The second component was thought to be a factor of the mandibular size in which factor loadings were highly positive on the mandibular measurements and contrarily low on the dental measurements. It is concluded that there is no obvious correlation between general sizes of the mandible and the teeth in Macaca fuscata fuscata.

Three-dimensional analysis of the maxillary first molar crowns of Canadian Inuit

The maxillary first molar crowns of 48 male and 38 female Canadian Inuit (Eskimos) were analyzed three-dimensionally by using moiré contourography methods. Cusp heights were significantly higher in males while the mesial and distal marginal ridges were more proximally placed in males. The metacone and the oblique ridge appeared to be better developed in the males. Comparison of the present results with published results for Dutch and Japanese indicated that the Japanese and Inuit had lower cusps that were more widely spaced than the Dutch. Correlation coefficients suggest that height measurements were positively correlated as were linear measurements. However, there were few significant correlations between height and linear determinations, suggesting that the development of the "width" of a crown is nearly independent of the development of the height of the cusps and crown.

Cusp height relationships between the upper and lower molars in Japanese subjects

Relationships of cusp height between the upper and lower first molars and between the deciduous second molars in Japanese subjects were analyzed with the aid of moiré contourography. In permanent molars, the height of the hypoconid had a mean value similar to that of the upper trigonal cusps, indicating that upper and lower functional cusps of the same height occlude with each other. In deciduous second molars, however, hypoconid heights were significantly smaller than trigonal cusp heights. Such differences in cusp height between permanent and deciduous dentition may be related to the function and phylogeny of tooth or jaw movements.

Comparative study of the upper molar occlusal table morphology among seven human populations

Three-dimensional morphology of the occlusal table of the upper first molars was compared in seven racial populations. Materials were moiré contourograms collected by ourselves over 5 years. Intercuspal distances and cuspal heights were comparatively studied in this analysis. When the populations were arranged in the order of these sizes, their arrangements based on intercuspal distances and cuspal heights were quite different from each other. When intercuspal distances were scaled by protocone-paracone distance, the distances connecting distal cusps were significantly smaller in Mongoloids (Japanese and Eskimo) than in Caucasoids (Dutch and Asiatic Indian), which suggests a reduction tendency of distal cusps in Mongoloids. This tendency was intermediate in Negroids and Australoid. Principal coordinate analysis was carried out on the basis of a similarity matrix including both intercuspal distances and cuspal heights. The result suggested that the three-dimensional shape of the occlusal table was distinguishable in four representative racial populations.

Principal component analysis of intercusp distances on the lower first molars of three human populations

The distances between the five main cusps of lower first molars were measured on moiré photographs of casts obtained from Japanese, Dutch and Australian Aboriginal children. Principal component analysis of the intercusp distances, log transformed and standardized so that average tooth size was held constant, revealed three sources of shape variation in cusp topography. All populations were similar for scores on component 1 which was concerned with variations in the position of the hypoconulid. The Dutch had lowest scores on component 2 indicating small buccolingual distances compared with mesiodistal, whereas the Australian Aboriginals had the lowest mean score on component 3, expressing the distances between metaconid, entoconid and hypoconulid.

Study of the cuspal ridges of the upper first molars in a modern Japanese population

Materials used were dental casts of the upper first molars of modern Japanese subjects, comprising 29 males and 25 females. Their molar occlusal surfaces were photographed by moiré contourography using the standard trigonal plane. The ridges of a cusp, comprising a central ridge and mesial and distal accessory ridges, were identified from the patterns of the moiré fringes. The central ridge was observed in all cusps except for the hypocone in both sexes. Frequencies of the mesial and distal accessory ridges of trigonal cusps were over 90% except for the distal accessory ridge of the metacone, and those of the hypocone were under 25% in both sexes. These values were generally higher in males than in females, especially for the distal accessory ridge of the metacone. The running pattern of the cuspal ridges showed little difference between sexes. The oblique ridge which was higher than the central groove formed a saddle-like structure. This ridge was observed in all materials, but its heights and structural components varied remarkably. In this study, the distal accessory ridge of the metacone was found to be incorporated into the oblique ridge in about 13% of cases. Variability in the running pattern of the ridges within a single cusp was highest in the hypocone and lowest in both the paracone and protocone. The results obtained are considered to represent the stability or reductive tendency of cusps in the upper first molars.

Three-dimensional measurement of the occlusal surfaces of lower first molars of Australian aboriginals

The occlusal surfaces of lower first molars of Australian Aboriginals were measured in three dimensions with the aid of Moiré contourography. Molar cuspal heights in this population were higher than in Japanese (Mongoloid) but lower than in Dutch (Caucasoid) populations. Intercuspal distances were considerably larger than those in the two other populations. Populational differences in occlusal features may influence both craniofacial structures and jaw movements in the three populations. Low correlations between the cuspal heights and the intercuspal distances in the other two populations were also found in this population, indicating that human molar cuspal height is independent of the transverse size of the crown. Mean values for the height of the three principal cusps in lower first molars were less than those in upper ones. However, the height of the hypoconid, which was the highest in the lower molar cusps, showed almost the same mean value as the height of the upper three principal cusps, indicating that the height of the main functional cusp, in both upper and lower first molars, was almost the same.

Uptake of secondary autoxidation products of linoleic acid by the rat

Incorporation of secondary autoxidation products (SP) of linoleic acid into the rat body was investigated. Radioactive SP was administered orally to a group of 5 rats, and excretions of radioactive substances in feces, urine and respiration were measured and compared with excretions from rats fed linoleic acid and its hydroperoxides. The SP-fed group excreted 45% and the other groups about 10% of the administered radioactivity through feces. Urinary excretion accounted for 52% of activity ingested in the SP group and less than 30% in the other groups. The 14CO2 produced in each group was about 25% of the ingested activity. Incorporation of the radioactive substances of SP into tissues and organs was measured periodically after administration of a single dose. The radioactive substances accumulated in the liver between 12-24 hr after administration and accounted for 2.6% of the total amount given, the highest level of all tissues and organs. This accumulation led to an elevation of serum transaminase activities, an increase in hepatic lipid peroxide, as determined by thiobarbituric acid test, and a slight hypertrophy of liver (1.5-fold). Therefore, absorbed SP appeared to contribute to the deleterious condition of the liver.

Three-dimensional measurements of the occlusal surfaces of upper molars in a Dutch population

The occlusal surfaces of the first upper molars of a Dutch population were measured three-dimensionally by moiré contourography. Cusps and ridges were higher than those of a Japanese population, but distances between cuspal tips were smaller. Differences in occlusal form may influence jaw movements in the two populations.

An application of the moiré method to three-dimensional measurements of the occlusal aspects of molars

Moiré photographs of the occlusal surface of human molars were made by means of a specially designed apparatus for moiré contourography. Since molars show contour lines with equal intervals, three-dimensional measurement of the complicated relief of the occlusal surface is possible. The positioning of molar teeth for making the photographs and the technique of the moiré photography for small objects were presented. The three-dimensional measuring method of the molar surface and its use for anthropological purpose were discussed.

Three-dimensional measurements of the occlusal surface of upper first molars in a modern Japanese population

Moiré photographs of the occlusal surface of first molars of Japanese children were taken by means of a specially designed moiré contourograph apparatus. They were then used for three-dimensional measurements. The heights of 4 cusps and some other points were measured by counting contour lines. Distances and angles between them were also measured. Sex differences of these measurements are found mainly around the metacone and hypocone. There is no clear correlation of the four cuspidal heights to the distances between them.

Evaluation of facial osteotomy with the aid of Moiré contourography

The Moiré method, a new technique for recording contour lines on the body surface, was applied to the evaluation of facial osteotomy in patients with oro-facial disharmony. The advantages of the methods are three-dimensional, with no contact. Small changes of the facial profile after osteotomies were measured three-dimensionally and the prediction of probable facial contour changes by osteotomies is discussed.