Selective NO2 Gas Sensors Employing Nitrogen- and Boron-Doped and Codoped Reduced Graphene Oxide

In this paper, we develop high-performance gas sensors based on heteroatom-doped and -codoped graphene oxide as a sensing material for the detection of NO2 at trace levels. Graphene oxide (GO) was doped with nitrogen and boron by a chemical method using urea and boric acid as precursors. The prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The obtained results proved the successful reduction of graphene oxide by doping effects, leading to the removal of some oxygen functional groups and restoration of an sp2 carbon structure. New bonds in honeycombs, such as pyridinic, pyrrolic, graphitic, B-C3, B-C2-O, and B-O, were created. Compared to the nondoped GO, the N/B-rGO materials exhibited enhanced responses toward low concentrations of NO2 (<1 ppm) at 100 °C. Particularly, the N-rGO-based device showed the highest sensitivity and lowest limit of detection.

Enhanced CO2 Sensing by Oxygen Plasma-Treated Perovskite-Graphene Nanocomposites

Carbon dioxide (CO2) is a major greenhouse gas responsible for global warming and climate change. The development of sensitive CO2 sensors is crucial for environmental and industrial applications. This paper presents a novel CO2 sensor based on perovskite nanocrystals immobilized on graphene and functionalized with oxygen plasma treatment. The impact of this post-treatment method was thoroughly investigated using various characterization techniques, including Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The detection of CO2 at parts per million (ppm) levels demonstrated that the hybrids subjected to 5 min of oxygen plasma treatment exhibited a 3-fold improvement in sensing performance compared to untreated layers. Consequently, the CO2 sensing capability of the oxygen-treated samples showed a limit of detection and limit of quantification of 6.9 and 22.9 ppm, respectively. Furthermore, the influence of ambient moisture on the CO2 sensing performance was also evaluated, revealing a significant effect of oxygen plasma treatment.

ZnO Decorated Graphene-Based NFC Tag for Personal NO2 Exposure Monitoring during a Workday

This paper presents the integration of a sensing layer over interdigitated electrodes and an electronic circuit on the same flexible printed circuit board. This integration provides an effective technique to use this design as a wearable gas measuring system in a target application, exhibiting high performance, low power consumption, and being lightweight for on-site monitoring. The wearable system proves the concept of using an NFC tag combined with a chemoresistive gas sensor as a cumulative gas sensor, having the possibility of holding the data for a working day, and completely capturing the exposure of a person to NO2 concentrations. Three different types of sensors were tested, depositing the sensing layers on gold electrodes over Kapton substrate: bare graphene, graphene decorated with 5 wt.% zinc oxide nanoflowers, or nanopillars. The deposited layers were characterized using FESEM, EDX, XRD, and Raman spectroscopy to determine their crystalline structure, morphological and chemical compositions. The gas sensing performance of the sensors was analyzed against NO2 (dry and humid conditions) and other interfering species (dry conditions) to check their sensitivity and selectivity. The resultant-built wearable NFC tag system accumulates the data in a non-volatile memory every minute and has an average low power consumption of 24.9 µW in dynamic operation. Also, it can be easily attached to a work vest.

Visible light activated SnO2:Dy thin films for the photocatalytic degradation of methylene blue

This paper explores the impact of dysprosium (Dy) doping on structural, optical, and photocatalytic properties of tin oxide (SnO2) thin films fabricated via spray pyrolysis. Dysprosium doping levels ranged from 0 to 7 at%, and films were grown on glass substrates at 350 °C. X-ray diffraction (XRD) analysis revealed an increase in crystallite size with Dy doping, signifying improved crystalline quality. Simultaneously, dislocation density and strain decreased, indicating enhanced film quality. Texture coefficient (Tchkl) results showed a predominant crystal orientation along the (110) plane due to Dy doping. Optical band gap energy (Eg) decreased with Dy doping up to 5%. Urbach energy increased with Dy doping, suggesting atomic structural flaws and defects. Scanning electron microscopy (SEM) analysis revealed the presence of numerous micro-aggregates on the film's surface. Notably, the density of these micro-aggregates increased proportionally with higher Dy doping levels, particularly emphasizing the pronounced effect observed in SnO2:Dy 5% thin films. These findings underscore the potential of Dy-doped SnO2 thin films for advanced photocatalytic applications, with SnO2:Dy 5% exhibiting favorable properties and demonstrating a 90.99% degradation efficiency in three hours under solar irradiation.

ZnO-Loaded Graphene for NO2 Gas Sensing

This paper investigates the effect of decorating graphene with zinc oxide (ZnO) nanoparticles (NPs) for the detection of NO₂. In this regard, two graphene sensors with different ZnO loadings of 5 wt.% and 20 wt.% were prepared, and their responses towards NO₂ at room temperature and different conditions were compared. The experimental results demonstrate that the graphene loaded with 5 wt.% ZnO NPs (G95/5) shows better performance at detecting low concentrations of the target gas than the one loaded with 20 wt.% ZnO NPs (G80/20). Moreover, measurements under dry and humid conditions of the G95/5 sensor revealed that the material is very sensitive to ambient moisture, showing an almost eight-fold increase in NO₂ sensitivity when the background changes from dry to 70% relative humidity. Regarding sensor selectivity, it presents a significant selectivity towards NO₂ compared to other gas compounds.

Enhancement of the CO2 Sensing/Capture through High Cationic Charge in M-ZrO2 (Li+, Mg2+, or Co3+): Experimental and Theoretical Studies

The capture and storage of CO₂ are of growing interest in atmospheric science since greenhouse gas emission has to be reduced considerably in the near future. The present paper deals with the doping of cations on ZrO₂, i.e., M-ZrO₂ (M = Li⁺, Mg²⁺, or Co³⁺), defecting the crystalline planes for the adsorption of carbon dioxide. The samples were prepared by the sol-gel method and characterized completely by different analytical methods. The deposition of metal ions on ZrO₂ (whose crystalline phases: monoclinic and tetragonal are transformed into a single-phase such as tetragonal for LiZrO₂ and cubic for MgZrO₂ or CoZrO₂) shows a complete disappearance of the XRD monoclinic signal, and it is consistent with HRTEM lattice fringes: 2.957 nm for ZrO₂ (101, tetragonal/monoclinic), 3.018 nm for tetragonal LiZrO₂, 2.940 nm for cubic MgZrO₂, and 1.526 nm for cubic CoZrO₂. The samples are thermally stable, resulting an average size of ∼5.0-15 nm. The surface of LiZrO₂ creates the oxygen deficiency, while for Mg²⁺ (0.089 nm), since the size of the atom is relatively greater than that of Zr⁴⁺ (0.084 nm), the replacement of Zr⁴⁺ by Mg²⁺ in sublattice is difficult; thus, a decrease of the lattice constant was noticed. Since the high band gap energy (ΔE > 5.0 eV) is suitable for CO₂ adsorption, the samples were employed for the selective detection/capture of CO₂ by using electrochemical impedance spectroscopy (EIS) and direct current resistance (DCR), showing that CoZrO₂ is capable of CO₂ capture about 75%. If M⁺ ions are deposited within the ZrO₂ matrix, then the charge imbalance allows CO₂ to interact with the oxygen species to form CO₃^2- which produces a high resistance (21.04 × 10⁶ (Ω, Ohm)). The adsorption of CO₂ with the samples was also theoretically studied showing that the interaction of CO₂ with MgZrO₂ and CoZrO₂ is more feasible than with LiZrO₂, subscribing to the experimental data. The temperature effect (273 to 573 K) for the interaction of CO₂ with CoZrO₂ was also studied by the docking method and observed the cubic structure is more stable at high temperatures as compared to the monoclinic geometry. Thus, CO₂ would preferably interact with ZrO₂^c (E_RS = -19.29 kJ/mol) than for ZrO₂^m (22.4 J/mmol (ZrO₂^c = cubic; ZrO₂^m = monoclinic).

Hydrogen Sensing Mechanism of WS2 Gas Sensors Analyzed with DFT and NAP-XPS

Nanostructured tungsten disulfide (WS₂) is one of the most promising candidates for being used as active nanomaterial in chemiresistive gas sensors, as it responds to hydrogen gas at room temperature. This study analyzes the hydrogen sensing mechanism of a nanostructured WS₂ layer using near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT). The W 4f and S 2p NAP-XPS spectra suggest that hydrogen makes physisorption on the WS₂ active surface at room temperature and chemisorption on tungsten atoms at temperatures above 150 °C. DFT calculations show that a hydrogen molecule physically adsorbs on the defect-free WS₂ monolayer, while it splits and makes chemical bonds with the nearest tungsten atoms on the sulfur point defect. The hydrogen adsorption on the sulfur defect causes a large charge transfer from the WS₂ monolayer to the adsorbed hydrogen. In addition, it decreases the intensity of the in-gap state, which is generated by the sulfur point defect. Furthermore, the calculations explain the increase in the resistance of the gas sensor when hydrogen interacts with the WS₂ active layer.

The planar anodic Al2O3-ZrO2 nanocomposite capacitor dielectrics for advanced passive device integration

The need for integrated passive devices (IPDs) emerges from the increasing consumer demand for electronic product miniaturization. Metal-insulator-metal (MIM) capacitors are vital components of IPD systems. Developing new materials and technologies is essential for advancing capacitor characteristics and co-integrating with other electronic passives. Here we present an innovative electrochemical technology joined with the sputter-deposition of Al and Zr layers to synthesize novel planar nanocomposite metal-oxide dielectrics consisting of ZrO₂ nanorods self-embedded into the nanoporous Al₂O₃ matrix such that its pores are entirely filled with zirconium oxide. The technology is utilized in MIM capacitors characterized by modern surface and interface analysis techniques and electrical measurements. In the 95-480 nm thickness range, the best-achieved MIM device characteristics are the one-layer capacitance density of 112 nF·cm^-2, the loss tangent of 4·10^-3 at frequencies up to 1 MHz, the leakage current density of 40 pA·cm^-2, the breakdown field strength of up to 10 MV·cm^-1, the energy density of 100 J·cm^-3, the quadratic voltage coefficient of capacitance of 4 ppm·V^-2, and the temperature coefficient of capacitance of 480 ppm·K^-1 at 293-423 K at 1 MHz. The outstanding performance, stability, and tunable capacitors' characteristics allow for their application in low-pass filters, coupling/decoupling/bypass circuits, RC oscillators, energy-storage devices, ultrafast charge/discharge units, or high-precision analog-to-digital converters. The capacitor technology based on the non-porous planar anodic-oxide dielectrics complements the electrochemical conception of IPDs that combined, until now, the anodized aluminum interconnection, microresistors, and microinductors, all co-related in one system for use in portable electronic devices.

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing

This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo₆@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo₆@Graphene hybrid showed an outstanding sensing performance toward NO₂, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo₆@Graphene chemoresistor was almost insensitive to NH₃, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH₃ even for a low loading of Mo₆. Nevertheless, the photoluminescence was not affected by the presence of NO₂. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing.

Unraveling the Gas-Sensing Mechanisms of Lead-Free Perovskites Supported on Graphene

Lead halide perovskites have been attracting great attention due to their outstanding properties and have been utilized for a wide variety of applications. However, the high toxicity of lead promotes an urgent and necessary search for alternative nanomaterials. In this perspective, the emerging lead-free perovskites are an environmentally friendly and harmless option. The present work reports for the first time gas sensors based on lead-free perovskite nanocrystals supported on graphene, which acts as a transducing element owing to its high and efficient carrier transport properties. The use of nanocrystals enables achieving excellent sensitivity toward gas compounds and presents better properties than those of bulky perovskite thin films, owing to their quantum confinement effect and exciton binding energy. Specifically, an industrially scalable, facile, and inexpensive synthesis is proposed to support two different perovskites (Cs₃CuBr₅ and Cs₂AgBiBr₆) on graphene for effectively detecting a variety of harmful pollutants below the threshold limit values. H₂ and H₂S gases were detected for the first time by utilizing lead-free perovskites, and ultrasensitive detection of NO₂ was also achieved at room temperature. In addition, the band-gap type, defect tolerance, and electronic surface traps at the nanocrystals were studied in detail for understanding the differences in the sensing performance observed. Finally, a comprehensive sensing mechanism is proposed.

Three-Dimensional Assemblies of Edge-Enriched WSe2 Nanoflowers for Selectively Detecting Ammonia or Nitrogen Dioxide

Herein, we present, for the first time, a chemoresistive-type gas sensor composed of two-dimensional WSe₂, fabricated by a simple selenization of tungsten trioxide (WO₃) nanowires at atmospheric pressure. The morphological, structural, and chemical composition investigation shows the growth of vertically oriented three-dimensional (3D) assemblies of edge-enriched WSe₂ nanoplatelets arrayed in a nanoflower shape. The gas sensing properties of flowered nanoplatelets (2H-WSe₂) are investigated thoroughly toward specific gases (NH₃ and NO₂) at different operating temperatures. The integration of 3D WSe₂ with unique structural arrangements resulted in exceptional gas sensing characteristics with dual selectivity toward NH₃ and NO₂ gases. Selectivity can be tuned by selecting its operating temperature (150 °C for NH₃ and 100 °C for NO₂). For instance, the sensor has shown stable and reproducible responses (24.5%) toward 40 ppm NH₃ vapor detection with an experimental LoD < 2 ppm at moderate temperatures. The gas detecting capabilities for CO, H₂, C₆H₆, and NO₂ were also investigated to better comprehend the selectivity of the nanoflower sensor. Sensors showed repeatable responses with high sensitivity to NO₂ molecules at a substantially lower operating temperature (100 °C) (even at room temperature) and LoD < 0.1 ppm. However, the gas sensing properties reveal high selectivity toward NH₃ gas at moderate operating temperatures. Moreover, the sensor demonstrated high resilience against ambient humidity (Rh = 50%), demonstrating its remarkable stability toward NH₃ gas detection. Considering the detection of NO₂ in a humid ambient atmosphere, there was a modest increase in the sensor response (5.5%). Furthermore, four-month long-term stability assessments were also taken toward NH₃ gas detection, and sensors showed excellent response stability. Therefore, this study highlights the practical application of the 2H variant of WSe₂ nanoflower gas sensors for NH₃ vapor detection.

Dysprosium Doped Zinc Oxide for NO2 Gas Sensing

Pure and dysprosium-loaded ZnO films were grown by radio-frequency magnetron sputtering. The films were characterized using a wide variety of morphological, compositional, optical, and electrical techniques. The crystalline structure, surface homogeneity, and bandgap energies were studied in detail for the developed nanocomposites. The properties of pure and dysprosium-doped ZnO thin films were investigated to detect nitrogen dioxide (NO₂) at the ppb range. In particular, ZnO sensors doped with rare-earth materials have been demonstrated as a feasible strategy to improve the sensitivity in comparison to their pure ZnO counterparts. In addition, the sensing performance was studied and discussed under dry and humid environments, revealing noteworthy stability and reliability under different experimental conditions. In this perspective, additional gaseous compounds such as ammonia and ethanol were measured, resulting in extremely low sensing responses. Therefore, the gas-sensing mechanisms were discussed in detail to better understand the NO₂ selectivity given by the Dy-doped ZnO layer.

Metal loaded nano-carbon gas sensor array for pollutant detection. NANOTECHNOLOGY 2022;33:195501. [PMID: 35073524 DOI: 10.1088/1361-6528/ac4e43]

Many research works report a sensitive detection of a wide variety of gas species. However, their in-lab detection is usually performed by using single gases and, therefore, selectivity often remains an unsolved issue. This paper reports a four-sensor array employing different nano-carbon sensitive layers (bare graphene, SnO₂@Graphene, WO₃@Graphene, and Au@CNTs). The different gas-sensitive films were characterised via several techniques such as FESEM, TEM, and Raman. First, an extensive study was performed to detect isolated NO₂, CO₂, and NH₃molecules, unravelling the sensing mechanism at the operating temperatures applied. Besides, the effect of the ambient moisture was also evaluated. Afterwards, a model for target gas identification and concentration prediction was developed. Indeed, the sensor array was used in mixtures of NO₂and CO₂for studying the cross-sensitivity and developing a calibration model. As a result, the NO₂detection with different background levels of CO₂was achieved with anR²of 0.987 and an RMSE of about 22 ppb.

Graphene Loading with Polypyrrole Nanoparticles for Trace-Level Detection of Ammonia at Room Temperature

The outstanding versatility of graphene for surface functionalization has been exploited by its decoration with synthesized polypyrrole (PPy) nanoparticles (NPs). A green, facile, and easily scalable for mass production nanocomposite development was proposed, and the resulting PPy@Graphene was implemented in chemoresistive gas sensors able to detect trace levels of ammonia (NH₃) under room-temperature conditions. Gas exposure for 5 min revealed that the presence of nanoparticles decorating graphene entail greater sensitivity (13-fold) in comparison to the bare graphene performance. Noteworthy, excellent repeatability (0.7% of relative error) and a low limit of detection of 491 ppb were obtained, together with excellent long-term stability. Besides, an extensive material characterization was conducted, and vibration bands obtained via Raman spectroscopy confirmed the formation of PPy NPs, while X-ray spectroscopy (XPS) revealed the relative abundance of the different species, as polarons and bipolarons. Additionally, XPS analyses were conducted before and after NH₃ exposure to assess the PPy aging and the changes induced in their physicochemical and electronic properties. Specifically, the gas sensor was tested during a 5-month period, demonstrating significant stability over time, since just a slight decrease (11%) in the responses was registered. In summary, the present work reports for the first time the use of PPy NPs decorating graphene for gas-sensing purposes, revealing promising properties for the development of unattended gas-sensing networks for monitoring air quality.

Physical and photocatalytic properties of sprayed Dy doped ZnO thin films under sunlight irradiation for degrading methylene blue

Dysprosium-doped zinc oxide (ZnO) thin films have been prepared through spray pyrolysis onto glass substrates. Cross-sections of the deposited thin films were assessed through Scanning Electron Microscopy (SEM), showing thicknesses between 200 and 300 nm. The thin film roughness was evaluated using the obtained images from the Atomic Force Microscope (AFM) micrographs. The crystallographic structure of the samples was analyzed by X-ray diffraction (XRD) revealing polycrystalline thin films. However, the slight shift towards a higher 2θ angle in Dy-doped ZnO films as compared to the pure ones indicates the incorporation of Dy³⁺ into the ZnO crystal lattice. The analysis of the oxidation state via X-ray photoelectron spectroscopy (XPS) confirms the incorporation of Dy ions in the ZnO matrix. Besides, UV-Vis-NIR spectrophotometry analysis and photoluminescence (PL) spectroscopy showed that bandgap energy values of ZnO decreased when dysprosium doping increased. Therefore, Dy doped ZnO thin films can be potentially used as a solar-light-driven photocatalyst. Among the different doping yields, the ZnO doped with 6% dysprosium provides the highest degradation rate for methylene blue (MB) under solar irradiation. Specifically, 9% of dye degradation was achieved under sunlight irradiation for 120 minutes.

Dysprosium-doped zinc oxide (ZnO) thin films prepared through spray pyrolysis show outstanding photocatalytic activity for the degradation of methylene blue.

On the Use of Pulsed UV or Visible Light Activated Gas Sensing of Reducing and Oxidising Species with WO3 and WS2 Nanomaterials

This paper presents a methodology to quantify oxidizing and reducing gases using n-type and p-type chemiresistive sensors, respectively. Low temperature sensor heating with pulsed UV or visible light modulation is used together with the application of the fast Fourier transform (FFT) to extract sensor response features. These features are further processed via principal component analysis (PCA) and principal component regression (PCR) for achieving gas discrimination and building concentration prediction models with R² values up to 98% and RMSE values as low as 5% for the total gas concentration range studied. UV and visible light were used to study the influence of the light wavelength in the prediction model performance. We demonstrate that n-type and p-type sensors need to be used together for achieving good quantification of oxidizing and reducing species, respectively, since the semiconductor type defines the prediction model’s effectiveness towards an oxidizing or reducing gas. The presented method reduces considerably the total time needed to quantify the gas concentration compared with the results obtained in a previous work. The use of visible light LEDs for performing pulsed light modulation enhances system performance and considerably reduces cost in comparison to previously reported UV light-based approaches.

Synthesis of p-n Heterojunctions via Aerosol Assisted Chemical Vapor Deposition to Enhance the Gas Sensing Properties of Tungsten Trioxide Nanowires: A Mini-Review

Here we discuss the aerosol-assisted synthesis of p-n heterojunction metal oxides and we report their gas sensing properties via a short review of the latest results achieved. In particular, we show that the decoration of one-dimensional tungsten oxide (n-type) with nanoparticles of different p-type oxides from transition metals such as Ni, Co or Ir enables achieving a chemical and electronic sensitization of the resulting hybrid metal oxide materials. This leads to remarkable differences in responsiveness to gases, showing that, to some extent, a selective detection of some major pollutant gases (NO₂, H₂S or NH₃) would be possible. Results are critically reviewed, shortcomings are identified and future research directions are given.

Characterization and Analysis of Okoume and Aiele Essential Oils from Gabon by GC-MS, Electronic Nose, and Their Antibacterial Activity Assessment

Essential oil resins of Aucoumea klaineana (Okoume) and Canarium schweinfurthii (Aiele) species, of the Burseraceae family, were studied to investigate their bioactive constituents and their antibacterial activities. Aiele resin had a higher yield (6.86%) of essential oil than Okoume (3.62%). Twenty-one compounds for Okoume and eighteen for Aiele essential oil were identified using a gas chromatography-mass spectrometry (Gp-C-MS) technique. The main compounds identified in Okoume essential oil were benzenemethanol, α, α,4-trimethyl (28.85%), (+)-3-carene (3,7,7-trimethyl bicyclo[4.1.0]hept-3-ene) (17.93%), D-Limonene ((4R)-1-methyl-4-prop-1-en-2-ylcyclohexene) (19.36%). With regard to the Aiele essential oil, we identified (1R,4S)-1-methyl-4-propan-2-ylcyclohex-2-en-1-ol (26.64%), and 1-methyl-4-propan-2-ylcyclohex-2-en-1-ol (26.83%). Two strains of bacteria, Escherichia coli and Staphylococcus aureus, were used in antibacterial tests. S. aureus was found to be more sensitive to Okoume and Aiele essential oils, with a high inhibition zone ranging from 20 to 16 mm. In comparison, the inhibition zone ranged from 6 to 12 mm for E. coli. An electronic nose (e-nose) combined with pattern analysis methods such as principal component analysis (PCA), discriminant function analysis (DFA), and hierarchical cluster analysis (HCA) were used to discriminate the essential oil samples. In summary, the e-nose and GC-MS allowed the identification of bioactive compounds in the essential oil samples, which have a strong antimicrobial activity, with satisfactory results.

LoRa Sensor Network Development for Air Quality Monitoring or Detecting Gas Leakage Events

During the few last years, indoor and outdoor Air Quality Monitoring (AQM) has gained a lot of interest among the scientific community due to its direct relation with human health. The Internet of Things (IoT) and, especially, Wireless Sensor Networks (WSN) have given rise to the development of wireless AQM portable systems. This paper presents the development of a LoRa (short for long-range) based sensor network for AQM and gas leakage events detection. The combination of both a commercial gas sensor and a resistance measurement channel for graphene chemoresistive sensors allows both the calculation of an Air Quality Index based on the concentration of reducing species such as volatile organic compounds (VOCs) and CO, and it also makes possible the detection of NO₂, which is an important air pollutant. The graphene sensor tested with the LoRa nodes developed allows the detection of NO₂ pollution in just 5 min as well as enables monitoring sudden changes in the background level of this pollutant in the atmosphere. The capability of the system of detecting both reducing and oxidizing pollutant agents, alongside its low-cost, low-power, and real-time monitoring features, makes this a solution suitable to be used in wireless AQM and early warning systems.

The role of anions and cations in the gas sensing mechanisms of graphene decorated with lead halide perovskite nanocrystals

We report the effects of both anions and cations in lead halide perovskite-graphene hybrids applied to gas sensing. Ultra-fast sensors that can work at room temperature are developed and studied to elucidate the role in the gas sensing mechanisms of different ions in perovskite nanocrystals.

Metal Oxide Nanoparticle-Decorated Few Layer Graphene Nanoflake Chemoresistors for the Detection of Aromatic Volatile Organic Compounds

Benzene, toluene, and xylene, commonly known as BTX, are hazardous aromatic organic vapors with high toxicity towards living organisms. Many techniques are being developed to provide the community with portable, cost effective, and high performance BTX sensing devices in order to effectively monitor the quality of air. In this paper, we study the effect of decorating graphene with tin oxide (SnO₂) or tungsten oxide (WO₃) nanoparticles on its performance as a chemoresistive material for detecting BTX vapors. Transmission electron microscopy and environmental scanning electron microscopy are used as morphological characterization techniques. SnO₂-decorated graphene displayed high sensitivity towards benzene, toluene, and xylene with the lowest tested concentrations of 2 ppm, 1.5 ppm, and 0.2 ppm, respectively. In addition, we found that, by employing these nanomaterials, the observed response could provide a unique double signal confirmation to identify the presence of benzene vapors for monitoring occupational exposure in the textiles, painting, and adhesives industries or in fuel stations.

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

Aromatic volatile organic compound (VOC) sensors are attracting growing interest as a response to the pressing market need for sensitive, fast response, low power consumption and stable sensors. Benzene and toluene detection is subject to several potential applications such as air monitoring in chemical industries or even biosensing of human breath. In this work, we report the fabrication of a room temperature toluene and benzene sensor based on multiwall carbon nanotubes (MWCNTs) decorated with gold nanoparticles and functionalised with a long-chain thiol self-assembled monolayer, 1-hexadecanethiol (HDT). High-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectroscopy (FTIR) were performed to characterize the gold nanoparticle decoration and to examine the thiol monolayer bonding to the MWCNTs. The detection of aromatic vapours using Au-MWCNT and HDT/Au-MWCNT sensors down to the ppm range shows that the presence of the self-assembled layer increases the sensitivity (up to 17 times), selectivity and improves the response dynamics of the sensors.

Gas Sensing Properties of Perovskite Decorated Graphene at Room Temperature

This paper explores the gas sensing properties of graphene nanolayers decorated with lead halide perovskite (CH3NH3PbBr3) nanocrystals to detect toxic gases such as ammonia (NH3) and nitrogen dioxide (NO2). A chemical-sensitive semiconductor film based on graphene has been achieved, being decorated with CH3NH3PbBr3 perovskite (MAPbBr3) nanocrystals (NCs) synthesized, and characterized by several techniques, such as field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. Reversible responses were obtained towards NO2 and NH3 at room temperature, demonstrating an enhanced sensitivity when the graphene is decorated by MAPbBr3 NCs. Furthermore, the effect of ambient moisture was extensively studied, showing that the use of perovskite NCs in gas sensors can become a promising alternative to other gas sensitive materials, due to the protective character of graphene, resulting from its high hydrophobicity. Besides, a gas sensing mechanism is proposed to understand the effects of MAPbBr3 sensing properties.

Diamondoid Nanostructures as sp3 -Carbon-Based Gas Sensors

Diamondoids, sp³ -hybridized nanometer-sized diamond-like hydrocarbons (nanodiamonds), difunctionalized with hydroxy and primary phosphine oxide groups, enable the assembly of the first sp³ -C-based chemical sensors by vapor deposition. Both pristine nanodiamonds and palladium nanolayered composites can be used to detect toxic NO₂ and NH₃ gases. This carbon-based gas sensor technology allows reversible NO₂ detection down to 50 ppb and NH₃ detection at 25-100 ppm concentration with fast response and recovery processes at 100 °C. Reversible gas adsorption and detection is compatible with 50 % humidity conditions. Semiconducting p-type sensing properties are achieved from devices based on primary phosphine-diamantanol, in which high specific area (ca. 140 m²  g^-1 ) and channel nanoporosity derive from H-bonding.

Hydrophilicity and carbon chain length effects on the gas sensing properties of chemoresistive, self-assembled monolayer carbon nanotube sensors

Here we describe the development of chemoresistive sensors employing oxygen-plasma-treated, Au-decorated multiwall carbon nanotubes (MWCNTs) functionalized with self-assembled monolayers (SAMs) of thiols. For the first time, the effects of the length of the carbon chain and its hydrophilicity on the gas sensing properties of SAMs formed on carbon nanotubes are studied, and additionally, the gas sensing mechanisms are discussed. Four thiols differing in the length of the carbon chain and in the hydrophobic or hydrophilic nature of the head functional group are studied. Transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy are used to analyze the resulting gas-sensitive hybrid films. Among the different nanomaterials tested, short-chain thiols having a hydrophilic head group, self-assembled onto Au-decorated carbon nanotubes were most responsive to nitrogen dioxide and ethanol vapors, even in the presence of ambient humidity. In particular, this nanomaterial was about eight times more sensitive to nitrogen dioxide than bare Au-decorated carbon nanotubes when operated at room temperature. This response enhancement is attributed to the interaction, via strong hydrogen bonding, of the polar molecules tested to the polar surface of hydrophilic thiols. The approach discussed here could be extended further by combining hydrophilic and hydrophobic thiol SAMs in Au-MWCNT sensor arrays as a helpful strategy for tuning sensor response and selectivity. This would make the detection of polar and nonpolar gas species employing low-power gas sensors easier, even under fluctuating ambient moisture conditions.

Wet chemistry route for the decoration of carbon nanotubes with iron oxide nanoparticles for gas sensing

In this work, we investigated the parameters for decorating multiwalled carbon nanotubes with iron oxide nanoparticles using a new, inexpensive approach based on wet chemistry. The effect of process parameters such as the solvent used, the amount of iron salt or the calcination time on the morphology, decoration density and nanocluster size were studied. With the proposed approach, the decoration density can be adjusted by selecting the appropriate ratio of carbon nanotubes/iron salt, while nanoparticle size can be modulated by controlling the calcination period. Pristine and iron-decorated carbon nanotubes were deposited on silicon substrates to investigate their gas sensing properties. It was found that loading with iron oxide nanoparticles substantially ameliorated the response towards nitrogen dioxide.

Gas Sensing with Iridium Oxide Nanoparticle Decorated Carbon Nanotubes

The properties of multi-wall carbon nanotubes decorated with iridium oxide nanoparticles (IrO_x-MWCNTs) are studied to detect harmful gases such as nitrogen dioxide and ammonia. IrO_x nanoparticles were synthetized using a two-step method, based on a hydrolysis and acid condensation growth mechanism. The metal oxide nanoparticles obtained were employed for decorating the sidewalls of carbon nanotubes. Iridium-oxide nanoparticle decorated carbon nanotube material showed higher and more stable responses towards NH₃ and NO₂ than bare carbon nanotubes under different experimental conditions, establishing the optimal operating temperatures and estimating the limits of detection and quantification. Furthermore, the nanomaterials employed were studied using different morphological and compositional characterization techniques and a gas sensing mechanism is proposed.

Using the Transient Response of WO₃ Nanoneedles under Pulsed UV Light in the Detection of NH₃ and NO₂

Here we report on the use of pulsed UV light for activating the gas sensing response of metal oxides. Under pulsed UV light, the resistance of metal oxides presents a ripple due to light-induced transient adsorption and desorption phenomena. This methodology has been applied to tungsten oxide nanoneedle gas sensors operated either at room temperature or under mild heating (50 &deg;C or 100 &deg;C). It has been found that by analyzing the rate of resistance change caused by pulsed UV light, a fast determination of gas concentration is achieved (ten-fold improvement in response time). The technique is useful for detecting both oxidizing (NO₂) and reducing (NH₃) gases, even in the presence of different levels of ambient humidity. Room temperature operated sensors under pulsed UV light show good response towards ammonia and nitrogen dioxide at low power consumption levels. Increasing their operating temperature to 50 &deg;C or 100 &deg;C has the effect of further increasing sensitivity.

Identification of Tequila with an Array of ZnO Thin Films: A Simple and Cost-Effective Method

An array of ZnO thin film sensors was obtained by thermal oxidation of physical vapor deposited thin Zn films. Different conditions of the thermal treatment (duration and temperature) were applied in view of obtaining ZnO sensors with different gas sensing properties. Films having undergone a long thermal treatment exhibited high responses to low ethanol concentrations, while short thermal treatments generally led to sensors with high ethanol sensitivity. The sensor array was used to distinguish among Tequilas and Agave liquor. Linear discriminant analysis and the multilayer perceptron neural network reached 100% and 86.3% success rates in the discrimination between real Tequila and Agave liquor and in the identification of Tequila brands, respectively. These results are promising for the development of an inexpensive tool offering low complexity and cost of analysis for detecting fraud in spirits.

Temperature-Dependent NO2 Sensing Mechanisms over Indium Oxide

The surface species responsible for NO₂ gas sensing over indium oxide was studied by operando DRIFTS coupled to a multivariate spectral analysis. It revealed the important roles of surface nitrites on the temperature-dependent gas sensing mechanism and the interaction of such nitrites with surface hydroxyls. A highly hydroxylated surface with high concentration of surface adsorbed H₂O is beneficial to enhance the concentration of adsorbed NO₂, present as nitrites, thus explaining superior sensing response at lower operating temperatures.

Nanomaterials for the Selective Detection of Hydrogen Sulfide in Air

This paper presents a focused review on the nanomaterials and associated transduction schemes that have been developed for the selective detection of hydrogen sulfide. It presents a quite comprehensive overview of the latest developments, briefly discusses the hydrogen sulfide detection mechanisms, identifying the reasons for the selectivity (or lack of) observed experimentally. It critically reviews performance, shortcomings, and identifies missing or overlooked important aspects. It identifies the most mature/promising materials and approaches for achieving inexpensive hydrogen sulfide sensors that could be employed in widespread, miniaturized, and inexpensive detectors and, suggests what research should be undertaken for ensuring that requirements are met.

Enhanced detection of nitrogen dioxide via combined heating and pulsed UV operation of indium oxide nano-octahedra

We report on the use of combined heating and pulsed UV light activation of indium oxide gas sensors for enhancing their performance in the detection of nitrogen dioxide in air. Indium oxide nano-octahedra were synthesized at high temperature (900 °C) via vapour-phase transport and screen-printed onto alumina transducers that comprised interdigitated electrodes and a heating resistor. Compared to the standard, constant temperature operation of the sensor, mild heating (e.g., 100 °C) together with pulsed UV light irradiation employing a commercially available, 325 nm UV diode (square, 1 min period, 15 mA drive current signal), results in an up to 80-fold enhancement in sensitivity to nitrogen dioxide. Furthermore, this combined operation method allows for making savings in power consumption that range from 35% to over 80%. These results are achieved by exploiting the dynamics of sensor response under pulsed UV light, which convey important information for the quantitative analysis of nitrogen dioxide.

MHDA-Functionalized Multiwall Carbon Nanotubes for detecting non-aromatic VOCs

The chemical modification of multiwalled carbon nanotubes (MWCNTs) with a long chain mercapto acid is reported as a way to improve sensitivity and response time of gas sensors for detecting alcohols, acetone and toxic gases such as DMMP. We have developed sensors employing MWCNTs decorated with gold nanoparticles and modified with a 16-mercaptohexadecanoic acid (MHDA) monolayer. Morphological and compositional analysis by Transmission Electron Microscopy (TEM), Fourier Transform Infra-red Spectroscopy (FTIR) and X-ray photoelectron spectroscopy were performed to characterize the gold nanoparticles and to check the bonding of the thiol monolayer. The detection of aromatic and non-aromatic volatiles and DMMP vapors by MWCNT/Au and MWCNT/Au/MHDA shows that the presence of the self-assembled layer increases sensitivity and selectivity towards non-aromatics. Furthermore, it ameliorates response dynamics, and significantly reduces nitrogen dioxide and moisture cross-sensitivity.

Aerosol assisted chemical vapour deposition of gas sensitive SnO2 and Au-functionalised SnO2 nanorods via a non-catalysed vapour solid (VS) mechanism

Tin oxide nanorods (NRs) are vapour synthesised at relatively lower temperatures than previously reported and without the need for substrate pre-treatment, via a vapour-solid mechanism enabled using an aerosol-assisted chemical vapour deposition method. Results demonstrate that the growth of SnO2 NRs is promoted by a compression of the nucleation rate parallel to the substrate and a decrease of the energy barrier for growth perpendicular to the substrate, which are controlled via the deposition conditions. This method provides both single-step formation of the SnO2 NRs and their integration with silicon micromachined platforms, but also allows for in-situ functionalization of the NRs with gold nanoparticles via co-deposition with a gold precursor. The functional properties are demonstrated for gas sensing, with microsensors using functionalised NRs demonstrating enhanced sensing properties towards H2 compared to those based on non-functionalised NRs.

Aerosol-Assisted CVD-Grown PdO Nanoparticle-Decorated Tungsten Oxide Nanoneedles Extremely Sensitive and Selective to Hydrogen

We report for the first time the successful synthesis of palladium (Pd) nanoparticle (NP)-decorated tungsten trioxide (WO3) nanoneedles (NNs) via a two-step aerosol-assisted chemical vapor deposition approach. Morphological, structural, and elemental composition analysis revealed that a Pd(acac)2 precursor was very suitable to decorate WO3 NNs with uniform and well-dispersed PdO NPs. Gas-sensing results revealed that decoration with PdO NPs led to an ultrasensitive and selective hydrogen (H2) gas sensor (sensor response peaks at 1670 at 500 ppm of H2) with low operating temperature (150 °C). The response of decorated NNs is 755 times higher than that of bare WO3 NNs. Additionally, at a temperature near that of the ambient temperature (50 °C), the response of this sensor toward the same concentration of H2 was 23, which is higher than that of some promising sensors reported in the literature. Finally, humidity measurements showed that PdO/WO3 sensors displayed low-cross-sensitivity toward water vapor, compared to bare WO3 sensors. The addition of PdO NPs helps to minimize the effect of ambient humidity on the sensor response.

Pt- and Pd-decorated MWCNTs for vapour and gas detection at room temperature

Here we report on the gas sensing properties of multiwalled carbon nanotubes decorated with sputtered Pt or Pd nanoparticles. Sputtering allows for an oxygen plasma treatment that removes amorphous carbon from the surface of the carbon nanotubes and creates oxygenated surface defects in which metal nanoparticles nucleate within a few minutes. The decoration with the 2 nm Pt or the 3 nm Pd nanoparticles is very homogeneous. This procedure is performed at the device level (i.e., for carbon nanotubes deposited onto sensor substrates) for many devices in one batch, which illustrates the scalability for the mass production of affordable nanosensors. The response to selected aromatic and non-aromatic volatile organic compounds, as well as pollutant gases has been studied. Pt- and Pd-decorated multiwalled carbon nanotubes show a fully reversible response to the non-aromatic volatile organic compounds tested when operated at room temperature. In contrast, these nanomaterials were not responsive to the aromatic compounds studied (measured at concentrations up to 50 ppm). Therefore, these sensors could be useful in a small, battery-operated alarm detector, for example, which is able to discriminate aromatic from non-aromatic volatile organic compounds in ambient.

Aerosol-assisted CVD-grown WO₃ nanoneedles decorated with copper oxide nanoparticles for the selective and humidity-resilient detection of H₂S

A gas-sensitive hybrid material consisting of Cu2O nanoparticle-decorated WO3 nanoneedles is successfully grown for the first time in a single step via aerosol-assisted chemical vapor deposition. Morphological, structural, and composition analyses show that our method is effective for growing single-crystalline, n-type WO3 nanoneedles decorated with p-type Cu2O nanoparticles at moderate temperatures (i.e., 380 °C), with cost effectiveness and short fabrication times, directly onto microhot plate transducer arrays with the view of obtaining gas sensors. The gas-sensing studies performed show that this hybrid nanomaterial has excellent sensitivity and selectivity to hydrogen sulfide (7-fold increase in response compared with that of pristine WO3 nanoneedles) and a low detection limit (below 300 ppb of H2S), together with unprecedented fast response times (2 s) and high immunity to changes in the background humidity. These superior properties arise because of the multiple p-n heterojunctions created at the nanoscale in our hybrid nanomaterial.

Aging time and brand determination of pasteurized milk using a multisensor e-nose combined with a voltammetric e-tongue

A combined approach based on a multisensor system to get additional chemical information from liquid samples through the analysis of the solution and its headspace is illustrated and commented. In the present work, innovative analytical techniques, such as a hybrid e-nose and a voltammetric e-tongue were elaborated to differentiate between different pasteurized milk brands and for the exact recognition of their storage days through the data fusion technique of the combined system. The Principal Component Analysis (PCA) has shown an acceptable discrimination of the pasteurized milk brands on the first day of storage, when the two instruments were used independently. Contrariwise, PCA indicated that no clear storage day's discrimination can be drawn when the two instruments are applied separately. Mid-level of abstraction data fusion approach has demonstrated that results obtained by the data fusion approach outperformed the classification results of the e-nose and e-tongue taken individually. Furthermore, the Support Vector Machine (SVM) supervised method was applied to the new subset and confirmed that all storage days were correctly identified. This study can be generalized to several beverage and food products where their quality is based on the perception of odor and flavor.

Effect of Pt nanoparticles on the optical gas sensing properties of WO3 thin films

Thin films of tungsten trioxide were deposited on quartz substrates by RF magnetron sputtering. Different annealing temperatures in the range from 423 to 973 K were used under ambient atmosphere. The influence of the annealing temperature on the structure and optical properties of the resulting WO3 thin films were studied. The surface morphology of the films is composed of grains with an average size near 70 nm for the films annealed between 773 and 973 K. Some of the WO3 thin films were also coated with Pt nanoparticles of about 45 nm in size. Spectrometric measurements of transmittance were carried out for both types of WO3 samples in the wavelength range from 200-900 nm, to determine the effect of the exposure to two different gases namely H2 and CO. Films showed fast response and recovery times, in the range of few seconds. The addition of Pt nanoparticles enables reducing the operation temperature to room temperature.

Gas sensing with gold-decorated vertically aligned carbon nanotubes

Vertically aligned carbon nanotubes of different lengths (150, 300, 500 µm) synthesized by thermal chemical vapor deposition and decorated with gold nanoparticles were investigated as gas sensitive materials for detecting nitrogen dioxide (NO2) at room temperature. Gold nanoparticles of about 6 nm in diameter were sputtered on the top surface of the carbon nanotube forests to enhance the sensitivity to the pollutant gas. We showed that the sensing response to nitrogen dioxide depends on the nanotube length. The optimum was found to be 300 µm for getting the higher response. When the background humidity level was changed from dry to 50% relative humidity, an increase in the response to NO2 was observed for all the sensors, regardless of the nanotube length.