Biomineralization of Polyelectrolyte-Functionalized Electrospun Fibers: Optimization and In Vitro Validation for Bone Applications

In recent years, polyelectrolytes have been successfully used as an alternative to non-collagenous proteins to promote interfibrillar biomineralization, to reproduce the spatial intercalation of mineral phases among collagen fibrils, and to design bioinspired scaffolds for hard tissue regeneration. Herein, hybrid nanofibers were fabricated via electrospinning, by using a mixture of Poly ɛ-caprolactone (PCL) and cationic cellulose derivatives, i.e., cellulose-bearing imidazolium tosylate (CIMD). The obtained fibers were self-assembled with Sodium Alginate (SA) by polyelectrolyte interactions with CIMD onto the fiber surface and, then, treated with simulated body fluid (SBF) to promote the precipitation of calcium phosphate (CaP) deposits. FTIR analysis confirmed the presence of SA and CaP, while SEM equipped with EDX analysis mapped the calcium phosphate constituent elements, estimating an average Ca/P ratio of about 1.33-falling in the range of biological apatites. Moreover, in vitro studies have confirmed the good response of mesenchymal cells (hMSCs) on biomineralized samples, since day 3, with a significant improvement in the presence of SA, due to the interaction of SA with CaP deposits. More interestingly, after a decay of metabolic activity on day 7, a relevant increase in cell proliferation can be recognized, in agreement with the beginning of the differentiation phase, confirmed by ALP results. Antibacterial tests performed by using different bacteria populations confirmed that nanofibers with an SA-CIMD complex show an optimal inhibitory response against S. mutans, S. aureus, and E. coli, with no significant decay due to the effect of CaP, in comparison with non-biomineralized controls. All these data suggest a promising use of these biomineralized fibers as bioinspired membranes with efficient antimicrobial and osteoconductive cues suitable to support bone healing/regeneration.

Development of collagen-chitosan dressing gel functionalized with propolis-zinc oxide nanoarchitectonics to accelerate wound healing

Using an in situ sol-gel technique, new nanoarchitectonics of propolis loaded zinc oxide nanoarchitectonics (PP/ZnO-NPs) were developed in order to improve the in vivo outcomes of collagen-chitosan gel in wounded rats. The obtained nanoarchitectonics were fully characterized. The XRD results indicate the presence of a Zincite phase for ZnO-NPs and Zincite accompanied by a minor amount of zinc hydroxide for PP/ZnO-NPs samples. While the TEM findings illustrate the transfer of the ZnO-NPs from agglomerated spheres with an average particle size of 230 ± 29 nm to needle-like NPs of 323 ± 173 nm length (PP1/ZnO-NPs) and to a sheet-like NPs of 500 ± 173 nm diameter (PP2/ZnO-NPs). In addition, the incorporation of PP results in an increase in the surface negativity of ZnO-NPs to -31.4 ± 6.4 mV for PP2/ZnO-NPs. The antimicrobial activities of the nanocomposite gel loaded with 10%PP1/ZnO-NPs (G6) revealed the highest inhibition zone against E. coli (26 ± 2.31 mm). Remarkably, the in vivo outcomes showed that the nanocomposite gel (G6) has exceptional collagen deposition, quick wound closure rates, and re-epithelization. The outcomes demonstrate the nanocomposite gel encouraging biological properties for the treatment of damaged and infected wounds.

Cell migration, DNA fragmentation and antibacterial properties of novel silver doped calcium polyphosphate nanoparticles

To combat infections, silver was used extensively in biomedical field but there was a need for a capping agent to eliminate its cytotoxic effects. In this study, polymeric calcium polyphosphate was doped by silver with three concentrations 1, 3 or 5 mol.% and were characterized by TEM, XRD, FTIR, TGA. Moreover, cytotoxicity, antibacterial, cell migration and DNA fragmentation assays were done to assure its safety. The results showed that the increase in silver percentage caused an increase in particle size. XRD showed the silver peaks, which indicated that it is present in its metallic form. The TGA showed that thermal stability was increased by increasing silver content. The antibacterial tests showed that the prepared nanoparticles have an antibacterial activity against tested pathogens. In addition, the cytotoxicity results showed that the samples exhibited non-cytotoxic behavior even with the highest doping concentration (5% Ag-CaPp). The cell migration assay showed that the increase in the silver concentration enhances cell migration up to 3% Ag-CaPp. The DNA fragmentation test revealed that all the prepared nanoparticles caused no fragmentation. From the results we can deduce that 3% Ag-CaPp was the optimum silver doped calcium polyphosphate concentration that could be used safely for medical applications.

Sodium Alginate- and Cationic Cellulose-Functionalized Polycaprolactone Nanofibers for In Vitro and Antibacterial Applications

The use of polyelectrolytes is emerging as a fascinating strategy for the functionalization of biomedical membranes, due to their ability to enhance biological responses using the interaction effect of charged groups on multiple interface properties. Herein, two different polyelectrolytes were used to improve the antibacterial properties of polycaprolactone (PCL) nanofibers fabricated via electrospinning. First, a new cationic cellulose derivative, cellulose-bearing imidazolium tosylate (CIMD), was prepared via the nucleophilic substitution of the tosyl group using 1-methylimidazole, as confirmed by NMR analyses, and loaded into the PCL nanofibers. Secondly, sodium alginate (SA) was used to uniformly coat the fibers' surface via self-assembly, as remarked through SEM-EDX analyses. Polyelectrolyte interactions between the CIMD and the SA, initially detected using a FTIR analysis, were confirmed via Z potential measurements: the formation of a CMID/SA complex promoted a substantial charge neutralization of the fibers' surfaces with effects on the physical properties of the membrane in terms of water adsorption and in vitro degradation. Moreover, the presence of SA contributed to the in vitro response of human mesenchymal stem cells (hMSCs), as confirmed by a significant increase in the cells' viability after 7 days in the case of the PCL/CMID/SA complex with respect to the PCL and PCL/CMID membranes. Contrariwise, SA did not nullify the antibacterial effect of CMID, as confirmed by the comparable resistance exhibited by S. mutans, S. aureus, and E. coli to the PCL/CIMD and PCL/CIMD/SA membranes. All the reported results corroborate the idea that the CIMD/SA functionalization of PCL nanofibers has a great potential for the fabrication of efficient antimicrobial membranes for wound healing.

Egyptian propolis extract for functionalization of cellulose nanofiber/poly(vinyl alcohol) porous hydrogel along with characterization and biological applications

Bee propolis is one of the most common natural extracts and has gained significant interest in biomedicine due to its high content of phenolic acids and flavonoids, which are responsible for the antioxidant activity of natural products. The present study report that the propolis extract (PE) was produced by ethanol in the surrounding environment. The obtained PE was added at different concentrations to cellulose nanofiber (CNF)/poly(vinyl alcohol) (PVA), and subjected to freezing thawing and freeze drying methods to develop porous bioactive matrices. Scanning electron microscope (SEM) observations displayed that the prepared samples had an interconnected porous structure with pore sizes in the range of 10-100 μm. The high performance liquid chromatography (HPLC) results of PE showed around 18 polyphenol compounds, with the highest amounts of hesperetin (183.7 µg/mL), chlorogenic acid (96.9 µg/mL) and caffeic acid (90.2 µg/mL). The antibacterial activity results indicated that both PE and PE-functionalized hydrogels exhibited a potential antimicrobial effects against Escherichia coli, Salmonella typhimurium, Streptococcus mutans, and Candida albicans. The in vitro test cell culture experiments indicated that the cells on the PE-functionalized hydrogels had the greatest viability, adhesion, and spreading of cells. Altogether, these data highlight the interesting effect of propolis bio-functionalization to enhance the biological features of CNF/PVA hydrogel as a functional matrix for biomedical applications.

Chitosan-organosilica hybrid decorated with silver nanoparticles for antimicrobial wearable cotton fabrics

Functional cotton fabrics using silver-based nanoparticles (AgNPs) have attracted a lot of attention as a new generation of healthcare wearable textile. In this study, cotton fabrics were coated via impregnation with silver nanoparticles using chitosan (Cs) and (or) chitosan-organosilica (Cs-OSH) solutions as adhesives matrices. The physicochemical properties were studied using UV-VIS spectroscopy, and transmission electron microscopy (TEM) and scanning electron microscope coupled with energy-dispersive X-ray spectroscopy methods (SEM-EDX). The antibacterial activity of the silver-treated fabrics was determined using agar diffusion method. However, nanosize spherical AgNPs were observed in Cs and Cs-OSH solution. The average particle diameter was around 10 nm for Cs/AgNPs sample and close 21 nm for Cs-OSH/AgNPs. Microscopy images showed the deposition of Ag NPs on the surface of cotton fibers. The results indicated that the cotton fibers treated with Cs-OSH/AgNPs solution showed good stability against washing and maintained higher antimicrobial activity even after being exposed to 10 consecutive home laundering conditions. Thus, this work suggests the use of chitosan-organosilicon matrix to improve the bonding between AgNPs and cotton fibers for better and long-term antimicrobial activity.

Amplified morphogenetic and bone forming activity of amorphous versus crystalline calcium phosphate/polyphosphate

Amorphous Ca-phosphate (ACP) particles stabilized by inorganic polyphosphate (polyP) were prepared by co-precipitation of calcium and phosphate in the presence of polyP (15% [w/w]). These hybrid nanoparticles showed no signs of crystallinity according to X-ray diffraction analysis, in contrast to the particles obtained at a lower (5% [w/w]) polyP concentration or to hydroxyapatite. The ACP/15% polyP particles proved to be a suitable matrix for cell growth and attachment and showed pronounced osteoblastic and vasculogenic activity in vitro. They strongly stimulated mineralization of the human osteosarcoma cell line SaOS-2, as well as cell migration/microvascularization, as demonstrated in the scratch assay and the in vitro angiogenesis tube forming assay. The possible involvement of an ATP gradient, generated by polyP during tube formation of human umbilical vein endothelial cells, was confirmed by ATP-depletion experiments. In order to assess the morphogenetic activity of the hybrid particles in vivo, experiments in rabbits using the calvarial bone defect model were performed. The particles were encapsulated in poly(d,l-lactide-co-glycolide) microspheres. In contrast, to crystalline Ca-phosphate (containing only 5% [w/w] polyP) or to crystalline β-tricalcium phosphate, amorphous ACP/15% polyP particles caused pronounced osteoinductive activity already after a six-week healing period. The synthesis of new bone tissue was accompanied by an intense vascularization and an increased expression of mineralization/vascularization marker genes. The data show that amorphous polyP-stabilized ACP, which combines osteoinductive activity with the ability to act as a precursor of hydroxyapatite formation both in vitro and in vivo, is a promising material for bone regeneration.

The inorganic polymer, polyphosphate, blocks binding of SARS-CoV-2 spike protein to ACE2 receptor at physiological concentrations

Inorganic polyphosphate (polyP) is a morphogenetically active and metabolic energy-delivering physiological polymer that is released from blood platelets. Here, we show that polyP efficiently inhibits the binding of the envelope spike (S)-protein of the coronavirus SARS-CoV-2, the causative agent of COVID-19, to its host cell receptor ACE2 (angiotensin-converting enzyme 2). To stabilize polyP against the polyP-degrading alkaline phosphatase, the soluble polymer was encapsulated in silica/polyP nanoparticles. Applying a binding assay, soluble Na-polyP (sizes of 40 P_i and of 3 P_i units) as well as silica-nanoparticle-associated polyP significantly inhibit the interaction of the S-protein with ACE2 at a concentration of 1 µg/mL, close to the level present in blood. This inhibition is attributed to an interaction of polyP with a basic amino acid stretch on the surface of the receptor binding domain of S-protein. PolyP retains its activity in a flushing solution, opening a new strategy for the prevention and treatment of SARS-CoV-2 infection in the oropharyngeal cavity. The data suggest that supplementation of polyP might contribute to a strengthening of the human innate immunity system in compromised, thrombocytopenic COVID-19 patients.

Amorphous Polyphosphate and Ca-Carbonate Nanoparticles Improve the Self-Healing Properties of both Technical and Medical Cements

Cement is used both as a construction material and for medical applications. Previously, it has been shown that the physiological polymer inorganic polyphosphate (polyP) is morphogenetically active in regeneration of skin, bone, and cartilage. The present study investigates the question if this polymer is also a suitable additive to improve the self-healing capacity not only of construction cement but also of inorganic bone void fillers. For the application in the cement, two different polyP-based amorphous nanoparticles (NP) are prepared, amorphous Ca-polyP NP and amorphous Ca-carbonate (ACC) NP. The particles are integrated into poly(methyl methacrylate) in a concentration ratio of 1:10. This material applied onto Portland cement blocks either by brush application or by blow spinning strongly accelerates the self-healing property of the cement after a 10 day incubation period. Most likely, this process depends on bacteria and their membrane-associated alkaline phosphatase, resulting in the formation of calcite from ACC. In a second approach, polyP is integrated into a calcium-silicate-based cement used in reconstitutive medicine. Subsequently, the cement becomes softer and more elastic. The data show that bioinspired polyP/ACC NP are suitable additives to improve the self-healing of construction cement and to biologize bone cement.

Self-Healing Properties of Bioinspired Amorphous CaCO3/Polyphosphate-Supplemented Cement

There is a strong interest in cement additives that are able to prevent or mitigate the adverse effects of cracks in concrete that cause corrosion of the reinforcement. Inorganic polyphosphate (polyP), a natural polymer that is synthesized by bacteria, even those on cement/concrete, can increase the resistance of concrete to progressive damage from micro-cracking. Here we use a novel bioinspired strategy based on polyP-stabilized amorphous calcium carbonate (ACC) to give this material self-healing properties. Portland cement was supplemented with ACC nanoparticles which were stabilized with 10% (w/w) Na-polyP. Embedding these particles in the hydrated cement resulted in the formation of calcite crystals after a hardening time of 10 days, which were not seen in controls, indicating that the particles dissolve and then transform into calcite. While there was no significant repair in the controls without ACC, almost complete closure of the cracks was observed after a 10 days healing period in the ACC-supplemented samples. Nanoindentation measurements on the self-healed crack surfaces showed a similar or slightly higher elasticity at a lower hardness compared to non-cracked surfaces. Our results demonstrate that bioinspired approaches, like the use of polyP-stabilized ACC shown here, can significantly improve the repair capacity of Portland cement.

A multicompartment vascular implant of electrospun wintergreen oil/ polycaprolactone fibers coated with poly(ethylene oxide)

Background

The aim of the present study was to fabricate double layered scaffolds of electrospun polycaprolactone (PCL) and poly(ethylene oxide) (PEO). The electrospun PCL fibers were functionalized with wintergreen oil (WO) as a novel approach to prevent vascular grafts failure due to thrombosis by adjusting biomaterial–blood interactions.

Methods

PCL tubular scaffolds were prepared by electrospinning approach and coated with PEO as a hydrophilic polymer. The single and double layered scaffolds were characterized in terms of their morphological, chemical properties -as well as-hemocompatibility assays (i.e. prothrombin time, hemolysis percentage and platelets adhesion). Moreover, the antioxidant potential of WO-PCL samples were measured by 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH) free radical assay.

Results

The results demonstrated that incorporation of WO during the electrospinning process decreased the PCL fiber diameter. In addition, the prothrombine time assay shows that WO could be used to lower the electrospun PCL fiber tendency to induce blood clotting. Moreover, SEM observations of platelets adhesion of both single and double layered PCL/PEO scaffolds fiber shows an increase of platelets number, compared with the scaffolds containing WO.

Conclusions

The antioxidant potential and blood compatibility measurements of WO-PCL/PEO samples highlight the approach made so far as an ideal synthetic small size vascular grafts to overcome autogenous grafts shortages and drawbacks.

A physiologically active interpenetrating collagen network that supports growth and migration of epidermal keratinocytes: zinc-polyP nanoparticles integrated into compressed collagen

It is demonstrated that polyphosphate, as a component in wound healing mats together with Zn²⁺, is essential for growth and migration of skin keratinocytes.

The biomaterial polyphosphate blocks stoichiometric binding of the SARS-CoV-2 S-protein to the cellular ACE2 receptor

The polymer polyphosphate, abundant in blood platelets, blocks the binding of the receptor-binding domain (RBD) of the SARS- spike (S)-protein to the angiotensin-converting enzyme 2 (ACE2) at low concentrations.

Transformation of Construction Cement to a Self-Healing Hybrid Binder

A new biomimetic strategy to im prove the self-healing properties of Portland cement is presented that is based on the application of the biogenic inorganic polymer polyphosphate (polyP), which is used as a cement admixture. The data show that synthetic linear polyp, with an average chain length of 40, as well as natural long-chain polyP isolated from soil bacteria, has the ability to support self-healing of this construction material. Furthermore, polyP, used as a water-soluble Na-salt, is subject to Na+/Ca2+ exchange by the Ca2+ from the cement, resulting in the formation of a water-rich coacervate when added to the cement surface, especially to the surface of bacteria-containing cement/concrete samples. The addition of polyP in low concentrations (<1% on weight basis for the solids) not only accelerated the hardening of cement/concrete but also the healing of microcracks present in the material. The results suggest that long-chain polyP is a promising additive that increases the self-healing capacity of cement by mimicking a bacteria-mediated natural mechanism.

In Situ Polyphosphate Nanoparticle Formation in Hybrid Poly(vinyl alcohol)/Karaya Gum Hydrogels: A Porous Scaffold Inducing Infiltration of Mesenchymal Stem Cells

The preparation and characterization of a porous hybrid cryogel based on the two organic polymers, poly(vinyl alcohol) (PVA) and karaya gum (KG), into which polyphosphate (polyP) nanoparticles have been incorporated, are described. The PVA/KG cryogel is prepared by intermolecular cross-linking of PVA via freeze-thawing and Ca2+-mediated ionic gelation of KG to form stable salt bridges. The incorporation of polyP as amorphous nanoparticles with Ca2+ ions (Ca-polyP-NP) is achieved using an in situ approach. The polyP constituent does not significantly affect the viscoelastic properties of the PVA/KG cryogel that are comparable to natural soft tissue. The exposure of the Ca-polyP-NP within the cryogel to medium/serum allows the formation of a biologically active polyP coacervate/protein matrix that stimulates the growth of human mesenchymal stem cells in vitro and provides the cells a suitable matrix for infiltration superior to the polyP-free cryogel. In vivo biocompatibility studies in rats reveal that already two to four weeks after implantation into muscle, the implant regions containing the polyP-KG/PVA material become replaced by initial granulation tissue, whereas the controls are free of any cells. It is proposed that the polyP-KG/PVA cryogel has the potential to become a promising implant material for soft tissue engineering/repair.

Biomimetic transformation of polyphosphate microparticles during restoration of damaged teeth

OBJECTIVE

In the present study, we investigated the fusion process between amorphous microparticles of the calcium salt of the physiological polymer comprising orthophosphate units, of inorganic polyphosphate (polyP), and enamel.

METHODS

This polymer was incorporated as an ingredient into toothpaste and the fusion process was studied by electron microscopy and by synchrotron-based X-ray tomography microscopy (SRXTM) techniques.

RESULTS

The data showed that toothpaste, supplemented with the amorphous Ca-polyP microparticles (aCa-polyP-MP), not only reseals tooth defects on enamel, like carious lesions, and dentin, including exposed dentinal tubules, but also has the potential to induce re-mineralization in the enamel and dentin regions. The formation of a regeneration mineralic zone on the tooth surface induced by aCa-polyP-MP was enhanced upon exposure to artificial saliva, as demonstrated by SRXTM. Energy dispersive X-ray analysis revealed an increase in the calcium/phosphorus atomic ratio of the enamel deposits to values characteristic for the particles during the treatment with polyP applied in the toothpaste, indicating a fusion of the particles with the tooth mineral.

SIGNIFICANCE

Our results suggest that toothpaste enriched with aCa-polyP-MP is a promising biomimetic material for accelerating enamel and dentin restoration.

Transformation of Amorphous Polyphosphate Nanoparticles into Coacervate Complexes: An Approach for the Encapsulation of Mesenchymal Stem Cells

Inorganic polyphosphate [polyP] has proven to be a promising physiological biopolymer for potential use in regenerative medicine because of its morphogenetic activity and function as an extracellular energy-donating system. Amorphous Ca²⁺ -polyP nanoparticles [Ca-polyP-NPs] are characterized by a high zeta potential with -34 mV (at pH 7.4). This should contribute to the stability of suspensions of the spherical nanoparticles (radius 94 nm), but make them less biocompatible. The zeta potential decreases to near zero after exposure of the Ca-polyP-NPs to protein/peptide-containing serum or medium plus serum. Electron microscopy analysis reveals that the particles rapidly change into a coacervate phase. Those mats are amorphous, but less stable than the likewise amorphous Ca-polyP-NPs and are morphogenetically active. Mesenchymal stem cells grown onto the polyP coacervate show enhanced growth/proliferation and become embedded in the coacervate. These results suggest that the Ca-polyP coacervate, formed from Ca-polyP-NPs in the presence of protein, can act as an adaptable framework that mimics a niche and provides metabolic energy in bone/cartilage engineering.

Two-Armed Activation of Bone Mineral Deposition by the Flavones Baicalin and Baicalein, Encapsulated in Polyphosphate Microparticles

In this study, we investigated the effect of the two flavonoids, baicalin (baicalein 7-O-[Formula: see text]- d-glucuronic acid) and its aglycone, baicalein (5,6,7-trihydroxyflavone), after encapsulation into amorphous calcium polyphosphate (Ca-polyP) microparticles on mineralization of primary human osteoblasts (phOSB). Both flavonoids, which come from root extracts of Scutellaria baicalensis Georgi, are used in Traditional Chinese Medicine, and are nontoxic in cells up to a concentration of 3[Formula: see text][Formula: see text]g/ml. The morphogenetically active, energy-rich Ca-polyP particles with a stoichiometric P:Ca ratio of 1:2 are degraded by cellular alkaline phosphatase (ALP) to ortho-phosphate used for bone hydroxyapatite formation. Here we show that the flavone-loaded Ca-polyP microparticles are readily taken up by phOSB, resulting in the accumulation of polyP around the nuclei and the formation of intracellular vesicles containing the ALP. In addition, we demonstrate that baicalin/baicalein causes a rise of the intracellular calcium [Ca[Formula: see text]]_i a level which markedly is augmented after encapsulation into Ca-polyP, through activation of the phospholipase C. Moreover, both flavones, either alone or associated with Ca-polyP microparticles, upregulate the expression of the osteoblast calcium efflux channel, the plasma membrane Ca[Formula: see text]-ATPase (PMCA), while the expression of ALP, which promotes bone mineralization, is induced by Ca-polyP and by the flavones only if present in the Ca-polyP-microparticle-associated form. As a result, the extent of bone mineralization is markedly enhanced. Based on the two-armed activating function, new applications of baicalin/baicalein as a component of nutriceuticals for osteoporosis prevention or bone implants can be envisaged.

A Novel Biomimetic Approach to Repair Enamel Cracks/Carious Damages and to Reseal Dentinal Tubules by Amorphous Polyphosphate

Based on natural principles, we developed a novel toothpaste, containing morphogenetically active amorphous calcium polyphosphate (polyP) microparticles which are enriched with retinyl acetate ("a-polyP/RA-MP"). The spherical microparticles (average size, 550 ± 120 nm), prepared by co-precipitating soluble Na-polyP with calcium chloride and supplemented with retinyl acetate, were incorporated into a base toothpaste at a final concentration of 1% or 10%. The "a-polyP/RA-MP" ingredient significantly enhanced the stimulatory effect of the toothpaste on the growth of human mesenchymal stem cells (MSC). This increase was paralleled by an upregulation of the MSC marker genes for osteoblast differentiation, collagen type I and alkaline phosphatase. In addition, polyP, applied as Zn-polyP microparticles ("Zn-a-polyP-MP"), showed a distinct inhibitory effect on growth of Streptococcus mutans, in contrast to a toothpaste containing the broad-spectrum antibiotic triclosan that only marginally inhibits this cariogenic bacterium. Moreover, we demonstrate that the "a-polyP/RA-MP"-containing toothpaste efficiently repairs cracks/fissures in the enamel and dental regions and reseals dentinal tubules, already after a five-day treatment (brushing) of teeth as examined by SEM (scanning electron microscopy) and semi-quantitative EDX (energy-dispersive X-ray spectroscopy). The occlusion of the dentin cracks by the microparticles turned out to be stable and resistant against short-time high power sonication. Our results demonstrate that the novel toothpaste prepared here, containing amorphous polyP microparticles enriched with retinyl acetate, is particularly suitable for prevention/repair of (cariogenic) damages of tooth enamel/dentin and for treatment of dental hypersensitivity. While the polyP microparticles function as a sealant for dentinal damages and inducer of remineralization processes, the retinyl acetate acts as a regenerative stimulus for collagen gene expression in cells of the surrounding tissue, the periodontium.

Fabrication of amorphous strontium polyphosphate microparticles that induce mineralization of bone cells in vitro and in vivo

Here we describe the fabrication process of amorphous strontium-polyphosphate microparticles ("Sr-a-polyP-MP"). The effects of these particles on growth and gene expression were investigated with SaOS-2 cells as well as with human mesenchymal stem cells (MSC) and compared with those particles prepared of amorphous calcium-polyphosphate ("Ca-a-polyP-MP") and of strontium salt. The results revealed a markedly higher stimulation of growth of MSC by "Sr-a-polyP-MP" compared to "Ca-a-polyP-MP" and a significant increase in mineralization of SaOS-2 cells, as well as an enhanced upregulation of the expression of the genes encoding for alkaline phosphatase and the bone morphogenetic protein 2 (BMP-2), likewise performed with SaOS-2 cells. On the other hand, "Sr-a-polyP-MP" only slightly changes the expression of the osteocyte-specific sclerostin, a negative regulator of the canonical Wnt signaling pathway and an inhibitor of bone cell differentiation as well as of mineralization in SaOS-2 cells. In contrast, "Ca-a-polyP-MP" strongly increased the steady-state expression of the SOST (sclerostin) gene. In animal studies poly(d,l-lactide-co-glycolide (PLGA) microspheres, containing polyP particles, were implanted into critical-size calvarial defects in rats. The results show that the amorphous Sr-polyP-containing microspheres caused an increased healing/mineralization of the bone defect even after short implantation periods of 8-12weeks, if compared to the β-tri-calcium phosphate control as well as to Ca-polyP. It is proposed that "Sr-a-polyP-MP" might elicit suitable properties to be applied as a regeneratively active implant material for bone repair.

STATEMENT OF SIGNIFICANCE

In this manuscript, we fabricated amorphous strontium-polyphosphate microparticles ("Sr-a-polyP-MP") and studied their effects on bone mineral formation in vitro as well as in vivo. In vitro, those particles substantially increased the expression of the genes encoding for alkaline phosphatase, the bone morphogenetic protein 2 and the mineralization. In vivo, the "Sr-a-polyP-MP" packed into PLGA microspheres and implanted into critical-size calvarial defects in rats resulted in a speeded up of the healing/mineralization of the bone defect. Those properties qualify Sr-a-polyP as a suitable biomaterial for bone regenerative implants.

Fabrication of a new physiological macroporous hybrid biomaterial/bioscaffold material based on polyphosphate and collagen by freeze-extraction

A macroporous hybrid biomaterial/bioscaffold material, eliciting morphogenetic activity, was fabricated with polyphosphate, chondroitin sulfate and collagen by the freeze-extraction technology.

Electrospinning of Bioactive Wound-Healing Nets

The availability of appropriate dressings for treatment of wounds, in particular chronic wounds, is a task that still awaits better solutions than provided by currently applied materials. The method of electrospinning enables the fabrication of novel materials for wound dressings due to the high surface area and porosity of the electrospun meshes and the possibility to include bioactive ingredients. Recent results show that the incorporation of biologically active inorganic polyphosphate microparticles and microspheres and synergistically acting retinoids into electrospun polymer fibers yields biocompatible and antibacterial mats for potential dressings with improved wound-healing properties. The underlying principles and the mechanism of these new approaches in the therapy wounds, in particular wounds showing impaired healing, as well as for further applications in skin regeneration/repair, are summarized.

Artificial cartilage bio-matrix formed of hyaluronic acid and Mg2+-polyphosphate

Here we show that inorganic polyphosphate (polyP), a polyanionic metabolic regulator consisting of multiple phosphate residues linked by energy-rich phosphoanhydride bonds, is present in the synovial fluid. In a biomimetic approach, to enhance cartilage synthesis and regeneration, we prepared amorphous polyP microparticles with Mg2+ as counterions. The particles were characterised by X-ray diffraction (XRD), energy-dispersive X-ray (EDX) and Fourier transformed infrared spectroscopic (FTIR) analyses. Similar particles were obtained after addition of Mg2+ ions to a solution containing hyaluronic acid, as a major component of the synovial fluid, and soluble Na-polyP. The viscous paste-like material formed, composed of globular microparticles with diameter of 400 nm, strongly promoted the adhesion of chondrocytes and caused a significant upregulation of the expression of the genes encoding collagen type 3A1, as a marker for chondrocyte differentiation, and SOX9, a transcription factor that regulates chondrocyte differentiation and proliferation. The expression level of the collagen type 3A1 gene was also enhanced by exposure of chondrocytes to synovial fluid that was found to contain polyP with a size of about 80 phosphate residues. This stimulatory effect was abolished after pre-incubation of the synovial fluid with the polyP degrading alkaline phosphatase. We propose a strategy for treatment of joint dysfunctions caused by osteoarthritis based on the application of amorphous Mg2+-polyP microparticles thatprevent calcium crystal formation in the synovial fluid using scavenging Ca2+ ions (Mg2+/Ca2+ exchange) and enhance chondrocyte function after binding of the Ca2+-polyP to hyaluronic acid at the cartilage surface.

Amorphous polyphosphate/amorphous calcium carbonate implant material with enhanced bone healing efficacy in a critical-size defect in rats

In this study the effect of amorphous calcium carbonate (ACC) microparticles and amorphous calcium polyphosphate (polyP) microparticles (termed aCa-polyP-MP) on bone mineral forming cells/tissue was investigated in vitro and in vivo. The ACC particles (termed ACC-P10-MP) were prepared in the presence of Na-polyP. Only the combinations of polyP and ACC microparticles enhanced the proliferation rate of human mesenchymal stem cells (MSCs). Gene expression studies revealed that ACC causes an upregulation of the expression of the cell membrane-associated carbonic anhydrase IX (CA IX; formation of ACC), while the transcript level of the alkaline phosphatase (ALP; liberation of orthophosphate from polyP) changes only relatively little. In contrast, aCa-polyP-MP primarily induces ALP expression. If both components are applied together a strong stimulation of expression of both marker genes is observed. In order to investigate whether ACC also enhances bone regeneration induced by polyP in vivo, the particles were encapsulated into PLGA (poly(d,l-lactide-co-glycolide)) microspheres (diameter ~800 μm) and implanted into rat critical-size calvarial defects. The studies revealed that animals that received aCa-polyP-MP microspheres showed an increased rate of regeneration compared to β-tri-calcium phosphate (β-TCP) controls. This effect is even accelerated if microspheres with both aCa-polyP-MP and ACC-P10-MP (1 : 1 weight ratio) are applied, resulting in an almost complete restoration of the defect area after 12 weeks. qRT-PCR analyses of tissue sections through the regeneration zone with microspheres containing both aCa-polyP-MP and ACC-P10-MP revealed a significantly higher upregulation of expression of the marker genes compared to each of the components alone. The Young's moduli for microspheres containing aCa-polyP-MP (1.74 MPa) and aCa-polyP-MP/ACC-P10-MP (2.38 MPa) were markedly higher compared to β-TCP-controls (0.63 mPa). Our results show that the combined application of ACC and Ca-polyP (both in the amorphous state) opens new strategies for the development of regenerative implants for the reconstruction of bone defects.

Morphogenetically active scaffold for osteochondral repair (polyphosphate/alginate/N,O-carboxymethyl chitosan)

Here we describe a novel bioinspired hydrogel material that can be hardened with calcium ions to yield a scaffold material with viscoelastic properties matching those of cartilage. This material consists of a negatively charged biopolymer triplet, composed of morphogenetically active natural inorganic polyphosphate (polyP), along with the likewise biocompatible natural polymers N,O-carboxymethyl chitosan (N,O-CMC) and alginate. The porosity of the hardened scaffold material obtained after calcium exposure can be adjusted by varying the pre-processing conditions. Various compression tests were applied to determine the local (nanoindentation) and bulk mechanical properties (tensile/compression test system for force measurements) of the N,O-CMC-polyP-alginate material. Determinations of the Young's modulus revealed that the stiffness of this comparably water rich (and mouldable) material increases during successive compression cycles to values measured for native cartilage. The material not only comprises viscoelastic properties suitable for a cartilage substitute material, but also displays morphogenetic activity. It upregulates the expression of genes encoding for collagen type II and aggrecan, the major proteoglycan within the articular cartilage, in human chondrocytes, and the expression of alkaline phosphatase in human bone-like SaOS-2 cells, as revealed in RT qPCR experiments. Further, we demonstrate that the new polyP-based material can be applied for manufacturing 3D solid models of cartilage bone such as of the tibial epiphyseal plate and the superior articular cartilage surface. Since the material is resorbable and enhances the activity of cells involved in regeneration of cartilage tissue, this material has the potential to be used for artificial articular cartilage implants.

Amorphous polyphosphate-hydroxyapatite: A morphogenetically active substrate for bone-related SaOS-2 cells in vitro

There is increasing evidence that inorganic calcium-polyphosphates (polyP) are involved in human bone hydroxyapatite (HA) formation. Here we investigated the morphology of the particles, containing calcium phosphate (CaP) with different concentrations of various Na-polyP concentrations, as well as their effects in cell culture. We used both SaOS-2 cells and human mesenchymal stem cells. The polymeric phosphate readily binds calcium ions under formation of insoluble precipitates. We found that addition of low concentrations of polyP (<10wt.%, referred to the CaP deposits) results in an increased size of the HA crystals. Surprisingly, at higher polyP concentrations (>10wt.%) the formation of crystalline HA is prevented and amorphous polyP/HA hybrid particles with a size of ≈50nm are formed, most likely consisting of polyP molecules linked via Ca(2+) bridges to the surface of the CaP deposits. Further studies revealed that the polyP-CaP particles cause a strong upregulation of the expression of the genes encoding for two marker proteins of bone formation, collagen type I and alkaline phosphatase. Based on their morphogenetic activity the amorphous polyP-CaP particles offer a promising material for the development of bone implants, formed from physiological inorganic precursors/polymers.

STATEMENT OF SIGNIFICANCE

Hydroxyapatite (HA) is a naturally occurring mineral of vertebrate bone. Natural HA, a bio-ceramic material which is crystalline to different scale, has been used as a biomaterial to fabricate scaffolds for in situ bone regeneration and other tissue engineering purposes. In contrast to natural HA, synthetic apatite is much less effective. In general, while HA is bioactive, its interaction and biocompatibility with existing bone tissue is low. These properties have been attributed to a minimal degradability in the physiological environment. In the present study we introduce a new Ca-phosphate (CaP) fabrication technology, starting from calcium chloride and dibasic ammonium phosphate with the HA characteristic Ca/P molar ratio of 10:6 and report that after addition >10% (by weight) of polyphosphate (polyP) amorphous CaP/HA samples were obtained. Those samples elicits strong morphogenetic activity let us to conclude that polyP/HA-based material might be beneficial for application as bone substitute implant.

A bio-imitating approach to fabricate an artificial matrix for cartilage tissue engineering using magnesium-polyphosphate and hyaluronic acid

Here we describe an cartilage-like material based on a hyaluronic acid-Mg/Ca-polyphosphate that is fabricated from a water-soluble Na-salt of energy-rich inorganic polyphosphate and soluble hyaluronic acid in the presence of water-insoluble CaCO₃.

High biocompatibility and improved osteogenic potential of amorphous calcium carbonate/vaterite

In human bone, amorphous calcium carbonate (ACC) is formed as a precursor of the crystalline carbonated apatite/hydroxyapatite (HA). Here we describe that the metastable ACC phase can be stabilized by inorganic polyphosphate (polyP) that is also used as a phosphate source for the non-enzymatic carbonate/phosphate exchange during HA formation. This polymer was found to suppress the transformation of ACC into crystalline CaCO₃ at a percentage of 5% [w/w] ("CCP5") with respect to CaCO₃ and almost completely at 10% [w/w] ("CCP10"). Both preparations (CaCO₃/polyP) are amorphous, but also contain small amounts of vaterite, as revealed by XRD, FTIR and SEM analyses. They did not affect the growth/viability of SaOS-2 cells. Cell culture and Ca²⁺ release experiments revealed that the CaCO₃ particles formed in the presence of polyP (CaCO₃/polyP) are degradable and, unlike calcite, become disintegrated with time during the cell culture incubation. Again in contrast to calcite, "CCP5" and "CCP10" were found to exhibit osteogenic activity and induce the expression of alkaline phosphatase gene in SaOS-2 cells as well as in human mesenchymal stem cells (MSC). In vivo studies in rats, using PLGA microspheres inserted in the muscles of the back of the animals, revealed that the encapsulated "CCP10" is not only biocompatible but also supports the regeneration at the implant region. We conclude that ACC containing small amounts of vaterite has osteogenic potential and offers superior properties compared to the biologically inert calcite with respect to a potential application as a scaffold material for bone implants.

Mineralization of bone-related SaOS-2 cells under physiological hypoxic conditions

Inorganic polyphosphate (polyP) is a physiological energy-rich polymer with multiple phosphoric anhydride bonds. In cells such as bone-forming osteoblasts, glycolysis is the main pathway generating metabolic energy in the form of ATP. In the present study, we show that, under hypoxic culture conditions, the growth/viability of osteoblast-like SaOS-2 cells is not impaired. The addition of polyP to those cells, administered as amorphous calcium polyP nanoparticles (aCa-polyP-NP; approximate size 100 nm), significantly increased the proliferation of the cells. In the presence of polyP, the cells produce significant levels of lactate, the end product of anaerobic glycolysis. Under those conditions, an eight-fold increase in the steady-state level of the membrane-associated carbonic anhydrase IX is found, as well as a six-fold induction of the hypoxia-inducible factor 1. Consequently, biomineral formation onto the SaOS-2 cells decreases under low oxygen tension. If the polyP nanoparticles are added to the cells, the degree of mineralization is enhanced. These changes had been measured also in human mesenchymal stem cells. The assumption that the bicarbonate, generated by the carbonic anhydrase in the presence of polyP under low oxygen, is deposited as a constituent of the bioseeds formed during initial hydroxyapatite formation is corroborated by the identification of carbon besides of calcium, oxygen and phosphorus in the initial biomineral deposit onto the cells using the sensitive technology of high-resolution energy dispersive spectrometry mapping. Based on these data, we conclude that polyP is required for the supply of metabolic energy during bone mineral formation under physiological, hypoxic conditions, acting as a 'metabolic fuel' for the cells to grow.

Electrospun bioactive mats enriched with Ca-polyphosphate/retinol nanospheres as potential wound dressing

Background

While electrospun materials have been frequently used in tissue engineering no wound dressings exist that significantly improved wound healing effectively.

Methods

We succeeded to fabricate three-dimensional (3D) electrospun poly(D,l-lactide) (PLA) fiber mats into which nanospheres, formed from amorphous calcium polyphosphate (polyP) nanoparticles (NP) and encapsulated retinol (“retinol/aCa-polyP-NS” nanospheres [NS]), had been incorporated.

Results

Experiments with MC3T3-E1 cells revealed that co-incubation of the cells with Ca-polyP together with retinol (or incubation with retinol/aCa-polyP-NS) resulted in a significant synergistic effect on cell growth compared with particle-free polyP complexed with Ca²⁺ or amorphous Ca-polyP NPs and retinol alone. Incubation of the cells in the presence of the retinol/aCa-polyP NSs also caused a significant increase of the expression levels of the genes encoding for the fatty acid binding protein 4 (FABP4), as well as of the genes encoding for leptin and the leptin receptor. In contrast, the single components, soluble Na-polyP, complexed to Ca²⁺, or retinol-free aCa-polyP NPs, and retinol, had no significant effect on the expression of these genes.

Conclusions

These results indicate that the PLA fibers, supplemented with aCa-polyP-NP or retinol/aCa-polyP-NS, elicit morphogenetic activity, suggesting that these fiber mats, along with the antibacterial effect of polyP, have a beneficial potential as wound dressings combining antimicrobial and regenerative (wound healing) properties.

General significance

The PLA-based fiber mats, containing retinol and polyP nanoparticles, provide promising bioactive meshes that are urgently needed as dressings for chronic wounds.

• Effect of PLA fiber mats with polyphosphate/retinol nanospheres on gene expression.

• Increased expression of FABP4, leptin and leptin receptor in MC3T3-E1 cells.

• Application as wound dressings, combining antimicrobial and regenerative properties.

Modular Small Diameter Vascular Grafts with Bioactive Functionalities

We report the fabrication of a novel type of artificial small diameter blood vessels, termed biomimetic tissue-engineered blood vessels (bTEBV), with a modular composition. They are composed of a hydrogel scaffold consisting of two negatively charged natural polymers, alginate and a modified chitosan, N,O-carboxymethyl chitosan (N,O-CMC). Into this biologically inert scaffold two biofunctionally active biopolymers are embedded, inorganic polyphosphate (polyP) and silica, as well as gelatin which exposes the cell recognition signal, Arg-Gly-Asp (RGD). These materials can be hardened by exposure to Ca(2+) through formation of Ca(2+) bridges between the polyanions, alginate, N,O-CMC, and polyP (alginate-Ca(2+)-N,O-CMC-polyP). The bTEBV are formed by pressing the hydrogel through an extruder into a hardening solution, containing Ca(2+). In this universal scaffold of the bTEBV biomaterial, polycations such as poly(L-Lys), poly(D-Lys) or a His/Gly-tagged RGD peptide (three RGD units) were incorporated, which promote the adhesion of endothelial cells to the vessel surface. The mechanical properties of the biopolymer material (alginate-Ca(2+)-N,O-CMC-polyP-silica) revealed a hardness (elastic modulus) of 475 kPa even after a short incubation period in CaCl2 solution. The material of the artificial vascular grafts (bTEBVs with an outer size 6 mm and 1.8 mm, and an inner diameter 4 mm and 0.8 mm, respectively) turned out to be durable in 4-week pulsatile flow experiments at an alternating pressure between 25 and 100 mbar (18.7 and 75.0 mm Hg). The burst pressure of the larger (smaller) vessels was 850 mbar (145 mbar). Incorporation of polycationic poly(L-Lys), poly(D-Lys), and especially the His/Gly-tagged RGD peptide, markedly increased the adhesion of human, umbilical vein/vascular endothelial cells, EA.HY926 cells, to the surface of the hydrogel. No significant effect of the polyP samples on the clotting of human plasma is measured. We propose that the metabolically degradable polymeric scaffold bTEBV is a promising biomaterial for future prosthetic vascular grafts.

Amorphous Ca²⁺ polyphosphate nanoparticles regulate the ATP level in bone-like SaOS-2 cells

Polyphosphate (polyP) is a physiologically occurring polyanion that is synthesized especially in bone-forming osteoblast cells and blood platelets. We used amorphous polyP nanoparticles, complexed with Ca(2+), that have a globular size of ∼100 nm. Because polyP comprises inorganic orthophosphate units that are linked together through high-energy phosphoanhydride bonds, we questioned whether the observed morphogenetic effect, elicited by polyP, is correlated with the energy-generating machinery within the cells. We show that exposure of SaOS-2 osteoblast-like cells to polyP results in a strong accumulation of mitochondria and a parallel translocation of the polyP-degrading enzyme alkaline phosphatase to the cell surface. If SaOS-2 cells are activated by the mineralization activation cocktail (comprising β-glycerophosphate, ascorbic acid and dexamethasone) and additionally incubated with polyP, a tenfold intracellular increase of the ATP level occurs. Even more, in those cells, an intensified release of ATP into the extracellular space is also seen. We propose and conclude that polyP acts as metabolic fuel after the hydrolytic cleavage of the phosphoanhydride linkages, which contributes to hydroxyapatite formation on the plasma membranes of osteoblasts.

Retinol encapsulated into amorphous Ca(2+) polyphosphate nanospheres acts synergistically in MC3T3-E1 cells

Both the quality and quantity of collagen, the major structural component of the skin, decrease in aging skin. We succeeded to encapsulate retinol into amorphous inorganic polyphosphate (polyP) nanoparticles together with calcium ions ("aCa-polyP-NP"), under formation of amorphous Ca-polyP/retinol nanospheres ("retinol/aCa-polyP-NS"). The globular nanospheres are not cytotoxic, show an almost uniform size of ≈ 45 nm and have a retinol content of around 25%. Both components of those nanospheres, retinol and the aCa-polyP-NP, if administered together, caused a strong increase in proliferation of mouse calvaria MC3T3 cells. The expressions of collagen types I, II and III genes, but not the expression of collagen type V gene, were significantly enhanced if retinol is added together with aCa-polyP-NP. This synergistic effect was especially pronounced for the expression of the collagen type III gene. We propose that the synergistic effect of the retinol/aCa-polyP-NS on cell growth and collagen type III expression is induced via two routes, first through cellular uptake of the 45 nm nanospheres by clathrin-mediated endocytosis and second through extracellular disintegration of the nanospheres resulting in the release of retinol which is then taken up into the cells after binding to the retinal binding protein receptor.

Biologizing titanium alloy implant material with morphogenetically active polyphosphate

As a further step towards a new generation of bone implant materials, we developed a procedure for biological functionalization of titanium alloy surfaces with inorganic calcium polyphosphate (Ca-polyP).

A new printable and durable N,O-carboxymethyl chitosan–Ca2+–polyphosphate complex with morphogenetic activity

In the absence of Ca²⁺ the polymers N,O-carboxymethyl chitosan, together with Na-polyphosphate and alginate, form random-coiled structures. Addition of Ca²⁺ transforms these polymers to durable implants.

Effect of bioglass on growth and biomineralization of SaOS-2 cells in hydrogel after 3D cell bioprinting

We investigated the effect of bioglass (bioactive glass) on growth and mineralization of bone-related SaOS-2 cells, encapsulated into a printable and biodegradable alginate/gelatine hydrogel. The hydrogel was supplemented either with polyphosphate (polyP), administered as polyP • Ca2+-complex, or silica, or as biosilica that had been enzymatically prepared from ortho-silicate by silicatein. These hydrogels, together with SaOS-2 cells, were bioprinted to computer-designed scaffolds. The results revealed that bioglass (nano)particles, with a size of 55 nm and a molar ratio of SiO2 : CaO : P2O5 of 55 : 40 : 5, did not affect the growth of the encapsulated cells. If silica, biosilica, or polyP • Ca2+-complex is co-added to the cell-containing alginate/gelatin hydrogel the growth behavior of the cells is not changed. Addition of 5 mg/ml of bioglass particles to this hydrogel significantly enhanced the potency of the entrapped SaOS-2 cells to mineralize. If compared with the extent of the cells to form mineral deposits in the absence of bioglass, the cells exposed to bioglass together with 100 µmoles/L polyP • Ca2+-complex increased their mineralization activity from 2.1- to 3.9-fold, or with 50 µmoles/L silica from 1.8- to 2.9-fold, or with 50 µmoles/L biosilica from 2.7- to 4.8-fold or with the two components together (100 µmoles/L polyP • Ca2+-complex and 50 µmoles/L biosilica) from 4.1- to 6.8-fold. Element analysis by EDX spectrometry of the mineral nodules formed by SaOS-2 revealed an accumulation of O, P, Ca and C, indicating that the mineral deposits contain, besides Ca-phosphate also Ca-carbonate. The results show that bioglass added to alginate/gelatin hydrogel increases the proliferation and mineralization of bioprinted SaOS-2 cells. We conclude that the development of cell-containing scaffolds consisting of a bioprintable, solid and cell-compatible inner matrix surrounded by a printable hard and flexible outer matrix containing bioglass, provide a suitable strategy for the fabrication of morphogenetically active and biodegradable implants.