Effects of stannous fluoride on eroded enamel permeability

This study aimed to evaluate the effect in vitro of a single application of a stannous fluoride- (SnF2-) containing toothpaste on eroded enamel. Forty-eight teeth were subjected to three acid treatments: 15% hydrochloric acid for 120 s (HA group); 1% citric acid (pH=4) for 180 s (CA group); 37% phosphoric acid for 30 s (PA group). They were brushed with an electric toothbrush with pressure control and 1 g of SnF2 (1100 ppm) toothpaste for 2 min. Polyether replicas of buccal enamel surfaces were obtained at baseline, after acid exposure and after brushing, gold sputtered and inspected by SEM for fluid droplets presence. Hydrochloric and citric acid treatments increased enamel permeability while, on the contrary, phosphoric acid reduced enamel fluid release. SnF2 application of ameliorated acid induced permeability in citric and hydrochloric treated samples. Permeability in phosphoric treated enamel was unchanged after topical application of SnF2. Our data show specific acid-dependent effects on enamel permeability and demonstrate that SnF2 application can reverse acid-induced permeability.

In vitro effects of fluoride-based and desensitizing toothpastes on dentine permeability

This study aims to evaluate the effectiveness in reducing dentine permeability of three different toothpastes comparing with a sodium fluoride one. Dentine permeability was measured by a fluid filtration system. Dentin discs were randomized in four experimental groups and treated with different commercial toothpastes, as it follows. Group A: Sensodyne® Rapid, with strontium acetate; group B: Elmex Sensitive ProfessionalTM, with arginine and 450 ppm monofluoro-phosphate; group C: Colgate Total Advanced®, with 1450 ppm NaF; group D: AZ Pro-Expert®, with 1100 ppm SnF2. After brushing specimens of each groups were assigned to two subgroups and: 1) stored in artificial saliva (2 h) and treated with 6% citric acid for 1 min; 2) stored in artificial saliva for 24 h. SEM analysis was performed to investigate dentinal tubules occlusion of acid treated and stored in artificial saliva samples. Dentin permeability proved affected by dentifrice treatments. The toothpastes specifically formulated for hypersensitivity showed significant effects concerning decrease of dentine permeability. SEM observations demonstrated the presence of dentifrice particles on dentin surface and inside dentin tubules. Stannous fluoride treated samples exhibited the greater tubules occlusion.

Note: radiofrequency scanning probe microscopy using vertically oriented cantilevers

We present a simple method, based on the modification of a widespread atomic force microscope, that allows the simultaneous acquisition of the sample topography and RF spectra at the nanoscale minimizing the parasitic capacitance of the cantilever. We used a microcantilever set with its long axis perpendicular to the specimen surface and connected to a vector network analyzer (RF range 100 kHz-8.5 GHz) to measure RF impedance signal variations at the cantilever apex-sample interface. The RF impedance signal was found highly sensitive to very short probe-to-sample distances (<50 nm) and to material properties at the interface.

SPM nanolithography of hydroxy-silicates

Bio-nanopatterning of surfaces is becoming a crucial technique with applications ranging from molecular and cell biology to medicine. Scanning probe microscopy (SPM) is one of the most useful tools for nanopatterning of flat surfaces. However, these patterns are usually built on homogeneous surfaces and require chemical functionalization to ensure specific affinity. Layered magnesium-aluminum hydroxide-silicates have already shown unique self-assembly properties on DNA molecules, due to their peculiar crystal chemistry based on alternating positive and negative crystal layers. However, patterns on these surfaces tend to be randomly organized. Here we show etching and oxidation at the nanometer scale of magnesium-aluminum hydroxide-silicates using the same SPM probe for the creation of organized nanopatterns. In particular, it is possible to produce three-dimensional structures in a reproducible way, with a depth resolution of 0.4 nm, lateral resolution of tens of nm, and a speed of about 10 μm s(-1). We report, as an example, the construction of an atomically flat charged pattern, designed to guide DNA deposition along predetermined directions without the need of any chemical functionalization of the surface.

Controlled positive and negative surface charge injection and erasure in a GaAs/AlGaAs based microdevice by scanning probe microscopy

In this paper, we show that positive and negative charges can be injected into the surface of SiO(2)/Si(3)N(4)/SiO(2)/GaAs/AlGaAs heterostructure material by using a biased tip of a scanning probe microscope. Furthermore, the injected charges can be erased with the same tip once grounded, working in slow scan and contact mode. Surface potential measurements by quantitative analysis of Kelvin probe force microscopy after drawing and erasing charges at room temperature are presented and discussed.

Bioactivity of chitosan in dentistry. Preliminary data on chitosan-based cements

BACKGROUND

The chemical association of chitosan with inorganic salts, such as calcium phosphate, finds a promising application in dentistry as room-temperature self-hardening cement. We present the physical, chemical and crystallographic characterization of newly-developed cements made of 1) calcium-phosphate and a chitosan gel obtained by acetic acid treatment, and 2) calcium phosphate and a chitosan gel obtained by ascorbic acid treatment. Both cements are self-hardening at room temperature.

METHODS

The cements were characterized by X-ray diffractography, scanning electron microscopy and fluorine-selective electrode analysis.

RESULTS

The chitosan-hydroxyapatite cements had hardness comparable to spongy bone and above that of PMMA.

CONCLUSIONS

The cements are promising for application in endodontics and restorative dentistry.

Calcium phosphates produced by physical methods in the treatment of dentin hypersensitivity

BACKGROUND

The aim of this paper is to study the properties of innovative materials based on defective calcium phosphates produced by physical methods in the therapy of dentin hypersensitivity.

METHODS

In particular, the effects of gels, aqueous solutions and toothpastes containing the above mentioned materials on dentinal permeability measured as dentin hydraulic conductance have been studied. The calcium phosphates have been characterized by X-ray powder diffraction (Rietveld analysis) and Fourier transform infra-red analysis. In addition, scanning electron microscopy has been performed to study the surface of dentin and enamel after treatment with the phosphates. In particular sound occlusal dentin, sound cervical dentin, carious occlusal dentin, sound buccal enamel and carious buccal enamel have been observed.

RESULTS

The results have shown that these biocompatible materials can be produced with chemical and physical characteristics very similar to dentin and/or enamel. By forming a protective layer inside and outside the dentin tubuli, the calcium phosphates significantly reduce the dentinal hypersensitivity.

CONCLUSIONS

These phosphates seem to be a promising material for clinical application.

Transformation reactions of partially gold-coated bioactive Ca-P glass granules investigated by analytical scanning electron microscopy

In the present work, we have clarified the detail of the surface transformation reactions of bioactive calcium-phosphate (Ca-P) glass granules induced by in vivo implantation in rabbit dorsal muscle sites. To this aim we have compared the behaviour, during the same implantation, between the as-prepared and gold-coated only-on-one-side glass granules. The deposited gold layer enabled us to determine very precisely the initial position of the surface of the glass before the transformation took place. In addition, since the gold layer acts as a diffusion barrier, it allowed the study of the direction and the mechanism of crystal growth which occurred at the glass surface. Lapped and polished cross-sections of the samples were examined by backscattered electron (BSE) imaging and quantitative (with standards) x-ray energy dispersive spectroscopy (EDS) in a scanning electron microscope (SEM). The observations showed the presence of an interlayered structure. Quantitative EDS microanalysis performed by profiling the electron beam across the samples indicated the presence of hydrated calcium phosphate in the external layer, an inhomogeneous silica-rich gel-type layer in the middle layer, and an unaffected original Ca-P glass in the centre. From the comparison with those granules gold-coated on one side, we deduced that the hydrated calcium phosphate layer grew towards the interior of the granules at the expense of the starting glass. A simple model, based on the balance of the concentrations of the elements which have diffused in the different layers, is proposed to explain the contribution of the elements constituting the original glass to the formation of the different layers. This result agrees with the experimental data obtained from image analysis and the microstructural behaviour of this type of glass is discussed.

Importance of microanalysis in understanding mechanism of transformation in active glassy biomaterials

This work deals with a method to study bioactive glassy materials used for repair of bone defects in order to understand the mechanism of the bioactivity and thus have its in vivo behavior optimized. The study of these materials takes into account their changes in morphology, by means of electron microscopy, after implantation in different animal models and evaluates the mechanism of the bioactivity through semi- and quantitative microanalytical evaluations in order to quantify the phenomenon of glass corrosion and the formation of a chemical bond with bone. Special preparations of glass granules before implantation were prepared to microanalytically study surfaces with different permeabilities.

Atomic force microscopy observations of acyl chains in phospholipids

The potential use of atomic force microscopy (AFM) to image the mode of assembly and to measure the corresponding lattice parameters of model systems consisting of ordered aggregates of cardiolipin molecules has been investigated. An unprecedented resolution of about 0.2 nm has been achieved on suitably prepared specimens. This enables the orientational order and the positional correlations of the individual molecules in the lattice to be defined, and submolecular details, such as the acyl chains and the polar groups, to be imaged. The structural parameters derived from AFM have been compared with those obtained by transmission electron diffraction of the same specimen and found to be in excellent agreement. AFM turns out to be a powerful and probably a unique tool to reveal local phase variations in systems, such as biological membranes, that have non-homogeneous composition and organization.

[The characteristics and properties of calcium phosphates in biomaterial formulations used in dentistry. 1]

In this work we present the features and the properties of natural and synthetic apatites, which we use in an experimental study of various commercial products composed by calcium phosphate. After having considered the general concepts of biomaterials and biocompatibility, we describe non biological tests used for the characterization of these products. Biomaterials used in this study are: reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non reabsorbable thin Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2 Osprogel, Bio-oss, Biostite, Osprovit, Merck Hydroxiapatite. Tests used are: X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and thermodifferential analysis (TG, DTG, DTA), scanner-ing electron microscopy (SEM) morphological analysis. Last but not least, we underline the particular features of these tests whose interpretation allows a more precise definition of the bioactivity of a biocompatible material.

[The X-ray fluorescence (XRF) spectrometry of biomaterials used in dentistry. 2]

In this work we analyze the following biomaterial: biomaterials used in this study are: reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non reabsorbable thin Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2, Osprogel, Bio-Oss, Biostite, Osprovit, Merck Hydroxiapatite. The quantitative XRF analysis was performed by a Philips PW 1480 with Rh tube. This research, besides underlining the possibility of applying the XRF method to the analysis of biomaterials. This study, shows the facility and the rapidity in the preparation of samples and standards in the form of tablets to undergo the analysis: furthermore the study shows the possibility of verify the analysis on the same sample in the future, because the tablet if well conserved, does not deteriorate. We can also verify a good analytic accuracy both for the principal elements (Ca, P) and for trace elements. The analyses show a moderate variability in the Ca/P ratio in the hydroxylapatites, and a greater variability in the secondary and trace elements.

[The characterization by Fourier-transform infrared vibration spectroscopy of mineral-based biomaterials commonly used in dentistry. 4]

In this study the following biomaterials were analysed by means of Fourier transform infrared vibrational spectroscopy (FTIR); they are: reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non reabsorbable fine Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2 Osprogel, Bio-Oss, Biostite, Osprovit, Merck Hydroxyapatite. The analysis was performed with a Jasco 5300-FTIR. At 64 readings for spectrum with a 2 cm-1 resolution. By means of this method it has been possible to perform a structural study at a molecular level of the commercial products mentioned before. The analysis showed which of the samples examined had lost the apatite OH- group during production. It also allowed the identification of some of the hydroxyapatites examined as carbonate apatites. Finally, it allowed the identification and quantification of the organic substances in the examined products.

[The specific characteristics determined by nonbiological tests of mineral-based biomaterials used in dentistry. 7]

In this work we relate about the results coming from crystallographic, physical and mineral tests taken on following biomaterials used in odontostomatology: reabsorbable Dac Blu, non reabsorbable Dac Blu, not reabsorbable atomized Dac Blu, not reabsorbable thin Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2, Osprogel, Bio-Oss, Biostite, Osprovit, Merck Hydroxiapatite. The data were obtained using the following tests: XRF, XRD, FTIR, TG, DTG, DTA, SEM. The results, although taken on few samples, showed that these biomaterials present a variability in some features, which can define the structural functionality.

[Scanning electron microscopy (SEM) and microanalysis (EDS) applied to the study of biomaterials for dental use. 6]

The study considers the use of scanning electron microscopy (SEM) and EDS microanalysis applied to the study of numerous mineral-based biomaterials of common use in odontostomatology. The products studied are the following: reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non rabsorbable fine Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2, Osprogel, Bio-Oss, Biostite, Ospro-vit, Merck Hydroxyapatite. By means of SEM it was possible to study the morphology and the microchemistry of the various biomaterials so as to have information about their physical and chemical characteristics, such as the crystalline form, the crystalline aggregations, the space dimensional distribution of the pores and check the possibilities of composition variability. All of these factors are fundamental to evaluate the functional biocompatibility of a biomaterial, once that its performance in a biological environment is known.

[The thermal analysis of mineral-based biomaterials used in dentistry. 5]

In this study the following commercial products were thermo-analysed (TG, DTG, DTA): reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non reabsorbable thin Dac Blu, reabsorbable Biocoral 450, non reabsorbable thin Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2, Osprogel, Bio-Oss, Biostite, Osprovit, Merck Hydroxiapatite. The apparatus utilized was a Setaram TAG 24, in a symmetrical set up, which gave the TG, DTG and DTA analysis simultaneously. The analysis of all the materials were performed in correct operative conditions. The thermo analyses gave useful information about the thermal stability of the samples. The TG analysis gave the data relative to the percentage of weight loss due to the volatile substances in the samples (H2Oass C, OH-, CO2). The DTG graph made it possible to establish the presence of carbonate apatite and/or hydroxyapatite or the absence of both the substances. Finally, DTA and DTG analyses allowed show the presence of various organic substances. These data were very useful to characterize the examined materials and confirmed the extreme importance and sensibility of this method.

Analysis of the in vivo reactions of a bioactive glass in soft and hard tissue

A bioactive glass, S53P4, was implanted as granules subcutaneously in muscles and connective tissue of rabbits, as well as in the mandibular bone of a sheep. After the implantation period of 2-3 months, cross-sections were prepared and studied by scanning electron microscopy and energy dispersive X-ray analysis. The glass reacted essentially in the same way in all types of tissue. The granules consisted of an unreacted core and a reacted layer with a silica-rich and calcium phosphate-rich zone. Large hydroxyapatite crystals were occasionally found on top of the calcium phosphate surface of the granules implanted in soft tissue. On the basis of elemental analysis of the reaction layers it was found that the release of calcium from inside the glass is sufficient to account for the formation of the calcium phosphate surface layer, whereas the release of phosphate from the glass is not sufficient.

Effects of pulsed magnetic fields in the therapy of osteoporosis induced by ovariectomy in the rat

This paper presents preliminary results on the effects of pulsed electromagnetic fields (EMF) in the therapy of post menopausal osteoporosis induced by ovariectomy in female rats aged ten months. In particular, the effects of the intensity of pulsed EMF applied at constant frequency has been studied. Magnetic fields pulsed at 50 Hz were used having a positive sinusoidal wave form with a maximum intensity of 30 and 70 Gauss. Treatment lasting one hour per day for 4 months showed that the pulsed EMF with 30 Gauss of maximum intensity are able to slow down the bone mass loss, keeping it within some 10%; with pulsed EMF with 70 Gauss of maximum intensity, instead, no significant bone mass loss was observed.

Thermodynamical aspects of the polymerization reaction of PMMA cement mixed with phosphatic mineral phases

The main problem related to the use of polymeric cement in orthopaedics is the high temperature reached during the polymerization, causing necrosis. This paper reports a thermodynamical study of the polymerization reaction of an acrylic cement mixed with powdered phosphatic phases. In particular, mixing of alpha-tricalciumphosphate, beta-tricalciumphosphate and hydroxyapatite was proposed. Important preliminary results indicated that amounts of about 66% by weight of alpha-tricalciumphosphate reduced the polymerization temperature to about 58 degrees C in respect to 100 degrees C of pure acrylic cement. In addition, a special chamber was designed and realized to monitor the temperature variations involved during the polymerization reaction of the different mixtures.

A preliminary study of human pineal gland concretions: structural and chemical analysis

Acervuli and fragments of pineal gland obtained from 33 subjects of both sexes and age ranging from 1 to 87 years, (30 autopsy and 3 biopsy specimens) were analyzed by light microscopy, transmission and scanning electron microscopy, X-ray diffraction and X-ray energy dispersive microanalysis. It was found that primary mineralization occurs in an organic matrix formed by pinealocytes and that hydroxyapatite also takes place in mineral deposition. From our analysis, the formation of acervuli appears to be age and sex independent and can be possibly related to the secretory activity of the gland.