Relation between sampling, sensitivity and precision in strain mapping using the Geometric Phase Analysis method in Scanning Transmission Electron Microscopy

The sensitivity and the precision of the Geometric Phase Analysis (GPA) method for strain characterization is a topic widely discussed in the literature and is usually difficult to quantify. Indeed, the GPA precision is intricately linked to the resolution of the strain maps defined when masking the periodic reflections in Fourier space. In this study an additional parameter, sampling, is proposed to be analyzed regarding the precision of GPA by developing the concept of a phase noise in the GPA equations. Both experimentally and theoretically, the following article demonstrates how the precision, and the sensitivity of the GPA method is improved when using a larger pixel spacing to record an electron micrograph in Scanning Transmission Electron Microscopy (STEM). The counterintuitive concept of increasing the field of view to improve the GPA precision results is an extension of the application of strain characterization methods in STEM towards low deformation levels.

Imaging Photon-Induced Near-Field Distributions of a Plasmonic, Self-Assembled Vesicle by a Laser-Integrated Electron Microscope

Plasmonic polymeric nanoassemblies offer valuable opportunities in photoconversion applications. Localized surface plasmon mechanisms behind such nanoassemblies govern their functionalities under light illumination. However, an in-depth investigation at the single nanoparticle (NP) level is still challenging, especially when the buried interface is involved, due to the availability of suitable techniques. Here, we synthesized an anisotropic heterodimer composed of a self-assembled polymer vesicle (THPG) capped with a single gold NP, enabling an 8-fold enhancement in hydrogen generation compared to the nonplasmonic THPG vesicle. We explored the anisotropic heterodimer at the single particle level by employing advanced transmission electron microscopes, including one equipped with a femtosecond pulsed laser, which allows us to visualize the polarization- and frequency-dependent distribution of the enhanced electric near fields at the vicinity of Au cap and Au-polymer interface. These elaborated fundamental findings may guide designing new hybrid nanostructures tailored for plasmon-related applications.

Alignment-invariant signal reality reconstruction in hyperspectral imaging using a deep convolutional neural network architecture

The energy resolution in hyperspectral imaging techniques has always been an important matter in data interpretation. In many cases, spectral information is distorted by elements such as instruments' broad optical transfer function, and electronic high frequency noises. In the past decades, advances in artificial intelligence methods have provided robust tools to better study sophisticated system artifacts in spectral data and take steps towards removing these artifacts from the experimentally obtained data. This study evaluates the capability of a recently developed deep convolutional neural network script, EELSpecNet, in restoring the reality of a spectral data. The particular strength of the deep neural networks is to remove multiple instrumental artifacts such as random energy jitters of the source, signal convolution by the optical transfer function and high frequency noise at once using a single training data set. Here, EELSpecNet performance in reducing noise, and restoring the original reality of the spectra is evaluated for near zero-loss electron energy loss spectroscopy signals in Scanning Transmission Electron Microscopy. EELSpecNet demonstrates to be more efficient and more robust than the currently widely used Bayesian statistical method, even in harsh conditions (e.g. high signal broadening, intense high frequency noise).

High-Voltage Induced Surface and Intragranular Structural Evolution of Ni-Rich Layered Cathode

Layered Ni-rich lithium transition metal oxides are promising cathode materials for high-energy-density lithium-ion batteries. These cathodes, however, suffer from rapid performance decay under high-voltage operation. In this work, the electrochemical properties and structural evolution of the LiNi_0.8 Mn_0.1 Co_0.1 O₂ (NMC811) cathode upon high-voltage cycling are investigated. The results show that the NMC811 cathode not only experiences surface evolution with the formation of Li-deficient rock-salt layers, but also suffers from drastic intragranular structural changes inside bulk grains after high-voltage cycling. Direct evidence for the formation of transition-metal/Li disordering domains with uneven Li content and lattice plane distortion at the internal grains of 4.6 V-cycled NMC811 are provided with their atomic ordering and spatial distribution clearly resolved. The complex intragranular structural changes impede Li⁺ diffusion inside bulk material, resulting in kinetic limitation and capacity loss. The results demonstrate that the high-voltage cycling would induce severe structural degradation at the grain interior of the cathode material beyond surface evolution, which contributes significantly to the rapid performance decay of the NMC811 cathode. The findings provide new insights for developing effective countermeasures to mitigate this degradation pathway.

Deciphering the Interaction of Single-Phase La0.3Sr0.7Fe0.7Cr0.3O3-δ with CO2/CO Environments for Application in Reversible Solid Oxide Cells

A detailed study aimed at understanding and confirming the reported highly promising performance of a La_0.3Sr_0.7Fe_0.7Cr_0.3O_3-δ (LSFCr) perovskite catalyst in CO₂/CO mixtures, for use in reversible solid oxide fuel cells (RSOFCs), is reported in this work, with an emphasis on chemical and performance stability. This work includes an X-ray diffraction (XRD), thermogravimetric analysis (TGA), and electrochemical study in a range of pO₂ atmospheres (pure CO₂, CO alone (balance N₂), and a 90-70% CO₂/10-30% CO containing mixture), related to the different conditions that could be encountered during CO₂ reduction at the cathode. Powdered LSFCr remains structurally stable in 20-100% CO₂ (balance N₂, pO₂ = 10^-11-10^-12 atm) without any decomposition. However, in 30% CO (balance N₂, pO₂ ∼ 10^-26 atm), a Ruddlesden-Popper phase, Fe nanoparticles, and potentially some coke are observed to form at 800 °C. However, this can be reversed and the original perovskite can be recovered by heat treatment in air at 800 °C. While no evidence for coke formation is obtained in 90-70% CO₂/10-30% CO (pO₂ = 10^-17-10^-18 atm) mixtures at 800 °C, in 70 CO₂/30 CO, minor impurities of SrCO₃ and Fe nanoparticles were observed, with the latter potentially beneficial to the electrochemical activity of the perovskite. Consistent with prior work, symmetrical two-electrode full cells (LSFCr used at both electrodes), fed with the various CO₂/CO gas mixtures at one electrode and air at the other, showed excellent electrochemical performance at 800 °C, both in the SOFC and in SOEC modes. Also, LSFCr exhibits excellent stability during CO₂ electrolysis in medium-term potentiostatic tests in all gas mixtures, indicative of its excellent promise as an electrode material for use in symmetrical solid oxide cells.

Crystal lattice image reconstruction from Moiré sampling scanning transmission electron microscopy

A wide range of reconstruction methods exist nowadays to retrieve data from their undersampled acquisition schemes. In the context of Scanning Transmission Electron Microscopy (STEM), compressed sensing methods successfully demonstrated the ability to retrieve crystalline lattice images from undersampled electron micrographs. In this manuscript, an alternative method is proposed based on the principles of Moiré sampling by intentionally generating aliasing artifacts and correcting them afterwards. The interference between the scanning grid of the electron beam raster and the crystalline lattice results in the formation of predictable sets of Moiré fringes (STEM Moiré hologram). Since the aliasing artifacts are simple spatial frequency shifts applied on each crystalline reflection, the crystal lattices can be recovered from the STEM Moiré hologram by reverting the aliasing frequency shifts from the Moiré reflections. Two methods are presented to determine the aliasing shifts for all the resolved crystalline reflections. The first approach is a prior knowledge-based method using information on the spatial frequency distribution of the crystal lattices (a common case in practice). The other option is a multiple sampling approach using different sampling parameters and does not require any prior knowledge. As an example, the Moiré sampling recovery method detailed in this manuscript is applied to retrieve the crystalline lattices from a STEM Moiré hologram recorded on a silicon sample. The great interest of STEM Moiré interferometry is to increase the field of view (FOV) of the electron micrograph (up to several microns). The Moiré sampling recovery method extends the application of the STEM imaging of crystalline materials towards low magnifications.

The effects of bending on plasmonic modes in nanowires and planar structures

In this work, we investigate the effects of bends on the surface plasmon resonances in nanowires (NWs) and isolated edges of planar structures using electron energy loss spectroscopy experiments and theoretical calculations. Previous work showed that the sharp bends in NWs do not affect their resonant modes. Here, we study previously overlooked effects and analyze systematically the evolution of resonant modes for several bending angles from 30° to 180°, showing that bending can have a significant effect on the plasmonic response of a nanostructure. In NWs, the modes can experience significant energy shifts that depend on the aspect ratio of the NW and can cause mode intersection and antinode bunching. We establish the relation between NW modes and edge modes and show that bending can even induce antinode splitting in edge modes. This work demonstrates that bends in plasmonic planar nanostructures can have a profound effect on their optical response and this must be accounted for in the design of optical devices.

Sub-4 nm Nanodiamonds from Graphene-Oxide and Nitrated Polycyclic Aromatic Hydrocarbons at 423 K

Nanodiamonds are interesting materials from the point of view of their biocompatibility and their chemical, spectroscopic, and mechanical properties. Current synthetic methods for nanodiamonds involve harsh environments, which are potentially hazardous in addition to being expensive. We report a low-temperature (423 K) hydrothermal approach to form nanodiamonds by using graphene-oxide or nitrated polycyclic aromatic hydrocarbons (naphthalene, anthracene, phenanthrene, or pyrene) as a starting material. The reaction products contain single-crystalline or twinned nanodiamonds with average diameters in the 2-3 nm range. Theoretical calculations prove that, at the nanoscale, sub-4 nm nanodiamonds may adopt a structure that is more stable than graphene-oxide and nitrated polycyclic aromatic hydrocarbons. Our findings show that sp² carbon in the polycyclic aromatic precursor can be converted to sp³ carbon under unexpectedly moderate temperature conditions by using nanoscale precursors and thus offer a low-temperature approach for the synthesis of sub-4 nm nanodiamonds.

Atomic scale chemical ordering in franckeite-a natural van der Waals superlattice

The mineral franckeite is a naturally occurring van der Waals superlattice which has recently attracted attention for future applications in optoelectronics, biosensors and beyond. Furthermore, its stacking of incommensurately modulated 2D layers, the pseudo tetragonal Q-layer and the pseudo hexagonal H-layer, is an experimentally accessible prototype for the development of synthetic van der Waals materials and of advanced characterization methods to reveal new insights in their structure and chemistry at the atomic scale that is crucial for deep understanding of its properties. While some experimental studies have been undertaken in the past, much is still unknown on the correlation between local atomic structure and chemical composition within the layers. Here we present an investigation of the atomic structure of franckeite using state-of-the-art high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) and atom probe tomography (APT). With atomic-number image contrast in HAADF STEM direct information about both the geometric structure and its chemistry is provided. By imaging samples under different zone axes within the van der Waals plane, we propose refinements to the structure of the Q-layer and H-layer, including several chemical ordering effects that are expected to impact electronic structure calculations. Additionally, we observe and characterize stacking faults which are possible sources of differences between experimentally determined properties and calculations. Furthermore, we demonstrate advantages and discuss current limitations and perspectives of combining TEM and APT for the atomic scale characterization of incommensurately modulated von der Waals materials.

Unveiling the role of surface, size, shape and defects of iron oxide nanoparticles for theranostic applications

Iron oxide nanoparticles (IONPs) are well-known contrast agents for MRI for a wide range of sizes and shapes. Their use as theranostic agents requires a better understanding of their magnetic hyperthermia properties and also the design of a biocompatible coating ensuring their stealth and a good biodistribution to allow targeting of specific diseases. Here, biocompatible IONPs of two different shapes (spherical and octopod) were designed and tested in vitro and in vivo to evaluate their abilities as high-end theranostic agents. IONPs featured a dendron coating that was shown to provide anti-fouling properties and a small hydrodynamic size favoring an in vivo circulation of the dendronized IONPs. While dendronized nanospheres of about 22 nm size revealed good combined theranostic properties (r₂ = 303 mM s^-1, SAR = 395 W g_Fe^-1), octopods with a mean size of 18 nm displayed unprecedented characteristics to simultaneously act as MRI contrast agents and magnetic hyperthermia agents (r₂ = 405 mM s^-1, SAR = 950 W g_Fe^-1). The extensive structural and magnetic characterization of the two dendronized IONPs reveals clear shape, surface and defect effects explaining their high performance. The octopods seem to induce unusual surface effects evidenced by different characterization techniques while the nanospheres show high internal defects favoring Néel relaxation for magnetic hyperthermia. The study of octopods with different sizes showed that Néel relaxation dominates at sizes below 20 nm while the Brownian one occurs at higher sizes. In vitro experiments demonstrated that the magnetic heating capability of octopods occurs especially at low frequencies. The coupling of a small amount of glucose on dendronized octopods succeeded in internalizing them and showing an effect of MH on tumor growth. All measurements evidenced a particular signature of octopods, which is attributed to higher anisotropy, surface effects and/or magnetic field inhomogeneity induced by tips. This approach aiming at an analysis of the structure-property relationships is important to design efficient theranostic nanoparticles.

Self-Constructed Multiple Plasmonic Hotspots on an Individual Fractal to Amplify Broadband Hot Electron Generation

Plasmonic nanoparticles are ideal candidates for hot-electron-assisted applications, but their narrow resonance region and limited hotspot number hindered the energy utilization of broadband solar energy. Inspired by tree branches, we designed and chemically synthesized silver fractals, which enable self-constructed hotspots and multiple plasmonic resonances, extending the broadband generation of hot electrons for better matching with the solar radiation spectrum. We directly revealed the plasmonic origin, the spatial distribution, and the decay dynamics of hot electrons on the single-particle level by using ab initio simulation, dark-field spectroscopy, pump-probe measurements, and electron energy loss spectroscopy. Our results show that fractals with acute tips and narrow gaps can support broadband resonances (400-1100 nm) and a large number of randomly distributed hotspots, which can provide unpolarized enhanced near field and promote hot electron generation. As a proof-of-concept, hot-electron-triggered dimerization of p-nitropthiophenol and hydrogen production are investigated under various irradiations, and the promoted hot electron generation on fractals was confirmed with significantly improved efficiency.

Revealing the Structure Evolution of Heterogeneous Pd Catalyst in Suzuki Reaction via the Identical Location Transmission Electron Microscopy

The mechanism of palladium nanoparticles (Pd NPs)-catalyzed cross-coupling reactions has been the subject of intense debate since the recognition of catalytic active sites involving a wide array of dynamic changed Pd species. Here, through the combination of the hot filtration experiment together with the recently developed identical location transmission electron microscopy (IL-TEM) method, the delicate structure evolution of highly dispersed Pd NPs supported on oxygen-functionalized carbon nanotubes (Pd/oCNTs) as well as the kinetics properties of derived dissolved species in liquid phase were systemically investigated in the Suzuki-Miyaura reaction. The result indicates that the leached Pd components caused by the strong adsorption of reactants might have a significant contribution to the coupling products, and the degree for different substrates follows the order of iodobenzene > phenylboronic acid > bromobenzene. Meanwhile, the typical three sequential behaviors of supported Pd NPs, including dissolution, deposition, and growth, along with the increase of the conversion throughout the reaction were spatiotemporally observed by tracking the evolution of individually identifiable NPs. The performed work not only provides direct evidence for the interaction between Pd NPs surface with reactants on atomic scale but also gives a valuable reference for fundamentally understanding the mechanism of the heterogeneous Pd-catalyzed Suzuki coupling process as well as rational design of next-generation catalysts with high efficiency and reusability for synthetic applications.

Selective area grown AlInGaN nanowire arrays with core-shell structures for photovoltaics on silicon

To pave the way for InGaN-on-Si integrated photovoltaics, uniform and close-packed n-GaN/(Al)InGaN/p-GaN nanowire (NW) arrays with a ∼0.29 μm thick absorption segment of ∼2.35 eV energy bandgap were fabricated on a Si substrate using Ti-mask selective area growth (SAG) in a molecular beam epitaxy (MBE) chamber. Instead of using thick and insulting buffer layers, this SAG process was realized by employing a 3 nm AlN/GaN: Ge buffer layer to facilitate electrical and thermal conduction between NWs and Si. Scanning transmission electron microscopy and high-resolution electron energy loss spectroscopy mapping revealed the discontinuities of AlN and the embedments of GaN:Ge which contribute to a negligible resistance of the NWs-on-Si interface. AlInGaN active segment exhibits core-shell structures, which suppress nonradiative surface recombination at NW surfaces. Working of AlInGaN core-shell NW solar cells was demonstrated with improved open-circuit voltage (Voc) and higher energy conversion efficiency (η) than those reported for InGaN NW solar cells. Stable output characteristics including the Voc of 1.41 V and η of 2.46% were obtained under 30-Sun illuminations. Such NWs-on-Si devices use Si substrate as the bottom electrode. With a low series resistance of ∼1 Ω, this work paves the way to monolithically integrate MBE-SAG III-nitride devices and Si-based electronics, such as Si solar cells and CMOS devices.

Pnictogens Allotropy and Phase Transformation during van der Waals Growth

With their ns2 np3 valence electronic configuration, pnictogens are the only system to crystallize in layered van der Waals (vdW) and quasi-vdW structures throughout the group. Light pnictogens crystallize in the A17 phase, and bulk heavier elements prefer the A7 phase. Herein, we demonstrate that the A17 of heavy pnictogens can be stabilized in antimonene grown on weakly interacting surfaces and that it undergoes a spontaneous thickness-driven transformation to the stable A7 phase. At a critical thickness of ∼4 nm, A17 antimony transforms from AB- to AA-stacked α-antimonene by a diffusionless shuffle transition followed by a gradual relaxation to the A7 phase. Furthermore, the competition between A7- and A17-like bonding affects the electronic structure of the intermediate phase. These results highlight the critical role of the atomic structure and substrate-layer interactions in shaping the stability and properties of layered materials, thus enabling a new degree of freedom to engineer their performance.

Engineering the Low Coordinated Pt Single Atom to Achieve the Superior Electrocatalytic Performance toward Oxygen Reduction

Configuring metal single-atom catalysts (SACs) with high electrocatalytic activity and stability is one efficient strategy in achieving the cost-competitive catalyst for fuel cells' applications. Herein, the atomic layer deposition (ALD) strategy for synthesis of Pt SACs on the metal-organic framework (MOF)-derived N-doped carbon (NC) is proposed. Through adjusting the ALD exposure time of the Pt precursor, the size-controlled Pt catalysts, from Pt single atoms to subclusters and nanoparticles, are prepared on MOF-NC support. X-ray absorption fine structure spectra determine the increased electron vacancy in Pt SACs and indicate the Pt-N coordination in the as-prepared Pt SACs. Benefiting from the low-coordination environment and anchoring interaction between Pt atoms and nitrogen-doping sites from MOF-NC support, the Pt SACs deliver an enhanced activity and stability with 6.5 times higher mass activity than that of Pt nanoparticle catalysts in boosting the oxygen reduction reaction (ORR). Density functional theory calculations indicate that Pt single atoms prefer to be anchored by the pyridinic N-doped carbon sites. Importantly, it is revealed that the electronic structure of Pt SAs can be adjusted by adsorption of hydroxyl and oxygen, which greatly lowers free energy change for the rate-determining step and enhances the activity of Pt SACs toward the ORR.

Ternary Sn-Ti-O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn-Ti-O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3 Ti_0.7 O₂ achieves a trade-off between active-site exposure and structural stability, demonstrating up to 71.5 % half-cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X-ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn-Ti-O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.

Resonant Optical Antennas with Atomic-Sized Tips and Tunable Gaps Achieved by Mechanical Actuation and Electrical Control

Enhanced electromagnetic fields in nanometer gaps of plasmonic structures increase the optical interaction with matter, including Raman scattering and optical absorption. Quantum electron tunneling across sub-1 nm gaps, however, lowers these effects again. Understanding these phenomena requires controlled variation of gap sizes. Mechanically actuated plasmonic antennas enable repeatable tuning of gap sizes from the weak-coupling over the quantum-electron-tunneling to the direct-electrical-contact regime. Gap sizes are controlled electrically via leads that only weakly disturb plasmonic modes. Conductance signals show a near-continuous transition from electron tunneling to metallic contact. As the antenna's absorption cross-section is reduced, thermal expansion effects are negligible, in contrast to conventional break-junctions. Optical scattering spectra reveal first continuous red shifts for decreasing gap sizes and then blue shifts below gaps of 0.3 nm. The approach provides pathways to study opto- and electromolecular processes at the limit of plasmonic sensing.

Modification of Nickel Surfaces by Bismuth: Effect on Electrochemical Activity and Selectivity toward Glycerol

Herein, we study the effect of adding bismuth to Ni-nanostructured catalysts (Ni_xBi_1-x, x = 100-90 at. %) for glycerol electro-oxidation in alkaline solution by combining physiochemical, electrochemical, and in situ infrared spectroscopy techniques, as well as continuous electrolysis with HPLC (high-performance liquid chromatography) product analysis. The addition of small quantities of Bi (<20 at. %) to Ni nanoparticles led to significant activity enhancement at lower overpotentials, with Ni₉₀Bi₁₀ displaying an over 2-fold increase compared to Ni. Small quantities of bismuth actively affected the reaction selectivity of Ni by suppressing the pathways with C-C bond cleavage, hindering the production of carbonate and formate and improving the formation of tartronate, oxalate, and glycerate. Furthermore, the effect of aging on Ni_xBi_1-x catalysts was investigated, resulting in structural modification from the Ni-Bi double shell/core structure to Bi decorated on the folded Ni sheet, thus enhancing their activity twice after 2 weeks of aging. NiBi catalysts are promising candidates for glycerol valorization to high-value-added products.

2D Antimony-Arsenic Alloys

Alloying in group V 2D materials and heterostructures is an effective degree of freedom to tailor and enhance their physical properties. Up to date, black arsenic-phosphorus is the only 2D group V alloy that has been experimentally achieved by exfoliation, leaving all other possible alloys in the realm of theoretical predictions. Herein, the existence of an additional alloy consisting of 2D antimony arsenide (2D-As_x Sb_{1- x} ) grown by molecular beam epitaxy on group IV semiconductor substrates and graphene is demonstrated. The atomic mixing of As and Sb in the lattice of the grown 2D layers is confirmed by low-energy electron diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The As content in 2D-As_x Sb_{1- x} is shown to depend linearly on the As₄ /Sb₄ deposition rate ratio and As concentrations up to 15 at% are reached. The grown 2D alloys are found to be stable in ambient conditions in a timescale of weeks but to oxidize after longer exposure to air. This study lays the groundwork for a better control of the growth and alloying of group V 2D materials, which is critical to study their basic physical properties and integrate them in novel applications.

Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction

Single atom catalysts exhibit particularly high catalytic activities in contrast to regular nanomaterial-based catalysts. Until recently, research has been mostly focused on single atom catalysts, and it remains a great challenge to synthesize bimetallic dimer structures. Herein, we successfully prepare high-quality one-to-one A-B bimetallic dimer structures (Pt-Ru dimers) through an atomic layer deposition (ALD) process. The Pt-Ru dimers show much higher hydrogen evolution activity (more than 50 times) and excellent stability compared to commercial Pt/C catalysts. X-ray absorption spectroscopy indicates that the Pt-Ru dimers structure model contains one Pt-Ru bonding configuration. First principle calculations reveal that the Pt-Ru dimer generates a synergy effect by modulating the electronic structure, which results in the enhanced hydrogen evolution activity. This work paves the way for the rational design of bimetallic dimers with good activity and stability, which have a great potential to be applied in various catalytic reactions.

Deposition and morphological evolution of nanostructured palladium during potential cycling: a liquid-cell TEM study

In order to gain better control over the functionality of Pd nanostructures used in several CO₂-mitigating electrochemical energy conversion systems, it is imperative to underpin different nanoscale phenomena influencing their structural durability. Hitherto, such analyses have been carried out before/after an electrochemical treatment, but not during the entire process. Here, we demonstrate monitoring of morphological evolution in Pd nanostructures over the entire course of electrochemical treatment using a liquid-cell transmission electron microscope (TEM) set-up. Our findings reveal new insights into nanoparticle growth, dissolution, detachment, and aggregation that are relevant for the development of functional Pd nanomaterials.

Structural origin of the high-performance light-emitting InGaN/AlGaN quantum disks

Ternary III-nitride-based nanowires with highly efficient light-emitting properties are essential for a broad range of applications. By using the selective area molecular-beam epitaxy method, InGaN/AlGaN quantum disks (QDs) embedded in hexagonal GaN nanowires were successfully grown. With the help of atomic-scale-resolved transmission electron microscopy and atom probe tomography, atomic ordering and other related structural information, such as crystallography and local chemistry, have been unambiguously revealed to provide unique insights into the exceptionally strong photoluminescence enhancements. A boomerang-shaped InGaN/AlGaN QD was identified, and atomic-level 1 : 1 periodic chemical ordering within the boomerang shaped AlGaN layers along the c-direction was revealed, confirming the preferential site occupation of Al-atoms. This type of growth provides a strong suppression of the quantum-confined Stark effect and is thus likely a very strong contributor to the exceptional properties. This work therefore enables us to directly establish the key structural elements necessary to understand the exceptionally strong emission exhibited by these materials. Optimization of the configurations of QDs could be an alternative design tool for developing various advanced LED device applications with well-designed structure and desirable optical properties.

Liquid Cell Transmission Electron Microscopy Sheds Light on The Mechanism of Palladium Electrodeposition

Electrodeposition is widely used to fabricate tunable nanostructured materials in applications ranging from biosensing to energy conversion. A model based on 3D island growth is widely accepted in the explanation of the initial stages of nucleation and growth in electrodeposition. However, there are regions in the electrodeposition parameter space where this model becomes inapplicable. We use liquid cell transmission electron microscopy along with post situ scanning electron microscopy to investigate electrodeposition in this parameter space, focusing on the effect of the supporting electrolyte, and to shed light on the nucleation and growth of palladium. Using a collection of electron microscopy images and current time transients recorded during electrodeposition, we discover that electrochemical aggregative growth, rather than 3D island growth, best describes the electrodeposition process. We then use this model to explain the change in the morphology of palladium electrodeposits from spherical to open clusters with nonspherical morphology when HCl is added to the electrolyte solution. The enhanced understanding of the early stages of palladium nucleation and growth and the role of electrolyte in this process provides a systematic route toward the electrochemical fabrication of nanostructured materials.

Copper adparticle enabled selective electrosynthesis of n-propanol

The electrochemical reduction of carbon monoxide is a promising approach for the renewable production of carbon-based fuels and chemicals. Copper shows activity toward multi-carbon products from CO reduction, with reaction selectivity favoring two-carbon products; however, efficient conversion of CO to higher carbon products such as n-propanol, a liquid fuel, has yet to be achieved. We hypothesize that copper adparticles, possessing a high density of under-coordinated atoms, could serve as preferential sites for n-propanol formation. Density functional theory calculations suggest that copper adparticles increase CO binding energy and stabilize two-carbon intermediates, facilitating coupling between adsorbed *CO and two-carbon intermediates to form three-carbon products. We form adparticle-covered catalysts in-situ by mediating catalyst growth with strong CO chemisorption. The new catalysts exhibit an n-propanol Faradaic efficiency of 23% from CO reduction at an n-propanol partial current density of 11 mA cm-2.

High Efficiency Si Photocathode Protected by Multifunctional GaN Nanostructures

Photoelectrochemical water splitting is a clean and environmentally friendly method for solar hydrogen generation. Its practical application, however, has been limited by the poor stability of semiconductor photoelectrodes. In this work, we demonstrate the use of GaN nanostructures as a multifunctional protection layer for an otherwise unstable, low-performance photocathode. The direct integration of GaN nanostructures on n⁺-p Si wafer not only protects Si surface from corrosion but also significantly reduces the charge carrier transfer resistance at the semiconductor/liquid junction, leading to long-term stability (>100 h) at a large current density (>35 mA/cm²) under 1 sun illumination. The measured applied bias photon-to-current efficiency of 10.5% is among the highest values ever reported for a Si photocathode. Given that both Si and GaN are already widely produced in industry, our studies offer a viable path for achieving high-efficiency and highly stable semiconductor photoelectrodes for solar water splitting with proven manufacturability and scalability.

Self-Assembled Functional DNA Superstructures as High-Density and Versatile Recognition Elements for Printed Paper Sensors

Micrometer-sized functional nucleic acid (FNA) superstructures (denoted as 3D DNA) were examined as a unique class of biorecognition elements to produce highly functional bioactive paper surfaces. 3D DNA containing repeating sequences of either a DNA aptamer or DNAzyme was created from long-chain products of rolling circle amplification followed by salt aging. The resulting 3D DNA retained its original spherical shape upon inkjet printing and adhered strongly to the paper surface via physisorption. 3D DNA paper sensors showed resistance to degradation by nucleases, suppressed nonspecific protein adsorption, and provided a much higher surface density of functional DNA relative to monomeric FNAs, making such species ideally suited for development of paper-based biosensors.

Intracellular Biodegradation of Ag Nanoparticles, Storage in Ferritin, and Protection by a Au Shell for Enhanced Photothermal Therapy

Despite their highly efficient plasmonic properties, gold nanoparticles are currently preferred to silver nanoparticles for biomedical applications such as photothermal therapy due to their high chemical stability in the biological environment. To confer protection while preserving their plasmonic properties, we allied the advantages of both materials and produced hybrid nanoparticles made of an anisotropic silver nanoplate core coated with a frame of gold. The efficiency of these hybrid nanoparticles (Ag@AuNPs) in photothermia was compared to monometallic silver nanoplates (AgNPs) or gold nanostars (AuNPs). The structural and functional properties of AuNPs, AgNPs, and Ag@AuNPs were investigated in environments of increasing complexity, in water suspensions, in cells, and in tumors in vivo. While AgNPs showed the greatest heating efficiency in suspension (followed by Ag@AuNPs and AuNPs), this trend was reversed intracellularly within a tissue-mimetic model. In this setup, AgNPs failed to provide consistent photothermal conversion over time, due to structural damage induced by the intracellular environment. Remarkably, the degraded Ag was found to be stored within the iron-storage ferritin protein. By contrast, the Au shell provided the Ag@AuNPs with total Ag biopersistence. As a result, photothermal therapy was successful with Ag@AuNPs in vivo in a mouse tumor model, providing the ultimate proof on Au shell's capability to shield the Ag core from the harsh biological environment and preserve its excellent heating properties.

Unraveling the Rapid Performance Decay of Layered High-Energy Cathodes: From Nanoscale Degradation to Drastic Bulk Evolution

Lithium-rich layered oxides are promising cathode candidates because of their exceptional high capacity. The commercial application of these high-energy cathodes, however, is thwarted by the undesired rapid performance decay during cycling. Surface degradation has been widely considered to correlate with the performance decay of the cathodes, whereas, in this work, we demonstrate that the degradation of Li-rich high-energy Li_1.2Ni_0.13Mn_0.54Co_0.13O₂ (HENMC) cathode material not only takes place at surfaces but also proceeds from its internal structure. In addition to demonstrating the surface reconstruction and the formation of a cathode-electrolyte interphase (CEI) layer of cycled HENMC cathode, this study uncovers the irreversible bulk phase transition from a Li-excess monoclinic ( C2/ m) solid solution into a conventional "layered" ( R3̅ m) phase, accompanied by complete loss of Li⁺ from the TM layers during cycling. Furthermore, the internal grains of HENMC bear lattice distortions, leading to the formation of "nano-defect" domains, which could limit the Li⁺ diffusion inside the grains. More prominently, the layered-to-spinel transition in the form of large spinel grains ( Fd3̅ m), hundreds of nanometers across, is discovered, and their detailed atomic arrangement is studied. The findings suggest that, instead of attributing the overall capacity fade to the surface degradation, these drastic bulk evolutions would be the main degradation mechanisms at the source of the rapid failure of Li-rich cathodes.

Nanoscale mechanism of the stabilization of nanoporous gold by alloyed platinum

Nanoporous gold (NPG) is usually made by electrochemical dealloying of Ag from binary AgAu alloys. The resulting nanoscale ligaments are not very stable, and tend to coarsen with time by surface self-diffusion, especially in electrolyte, which may lead to inferior electrocatalytic properties. Addition of a small amount of Pt to the precursor alloy is known to refine and stabilize the nanoporous product (NPG-Pt). However, the mechanisms by which Pt serves to refine the microstructure remain poorly understood. The present study aims to expand our knowledge of the role of Pt by examining NPG-Pt at atomic resolution with Atom Probe Tomography (APT), as well as by aberration-corrected Transmission Electron Microscopy. Atomic level observation of Pt enrichment on ligament surfaces sheds light on the underlying mechanisms that give rise to Pt's refining effect. Owing to improved Ag retention with higher Pt content, NPG-Pt₁ (made by dealloying Ag₇₇Au₂₂Pt₁) was shown to have the highest surface area-to-volume ratio, compared to NPG-Pt₃ (made by dealloying Ag₇₇Au₂₀Pt₃). Quantitative estimates reveal up to 5-fold enrichment of Pt at nanoligament surfaces, compared to the precursor content, in NPG-Pt. The interface between the dealloyed layer and the substrate was captured by APT, for the first time. The findings of this investigation add insight into the functionality of NPG-Pt and its prospective catalytic performance.

Correlative electron energy loss spectroscopy and cathodoluminescence spectroscopy on three-dimensional plasmonic split ring resonators

We present the surface plasmon resonance modes in three-dimensional (3D) upright split ring resonators (SRR) as studied by correlative cathodoluminescence (CL) spectroscopy in a scanning electron microscope (SEM) and electron energy loss spectroscopy (EELS) in a transmission electron microscope. We discuss the challenges inherent in studying the plasmon modes of a 3D nanostructure and how meeting these challenges benefits from the complementary use of EELS and SEM-CL. With the use of EELS, we detect a strong first order mode in the SRR; with comparison to simulations, we are able to identify this as the well-known magnetic dipole moment of the SRR. Combining the EELS spectra with SEM-CL on the same structure reveals the higher order modes present in this 3D nanostructure, which we link to the coupling and hybridization of rim modes present in the two upright hollow pillars of the split ring.

Spatially resolved surface valence gradient and structural transformation of lithium transition metal oxides in lithium-ion batteries

Layered lithium transition metal oxides are one of the most important types of cathode materials in lithium-ion batteries (LIBs) that possess high capacity and relatively low cost. Nevertheless, these layered cathode materials suffer structural changes during electrochemical cycling that could adversely affect the battery performance. Clear explanations of the cathode degradation process and its initiation, however, are still under debate and not yet fully understood. We herein systematically investigate the chemical evolution and structural transformation of the LiNi_xMn_yCo_1-x-yO₂ (NMC) cathode material in order to understand the battery performance deterioration driven by the cathode degradation upon cycling. Using high-resolution electron energy loss spectroscopy (HR-EELS) we clarify the role of transition metals in the charge compensation mechanism, particularly the controversial Ni²⁺ (active) and Co³⁺ (stable) ions, at different states-of-charge (SOC) under 4.6 V operation voltage. The cathode evolution is studied in detail from the first-charge to long-term cycling using complementary diagnostic tools. With the bulk sensitive ⁷Li nuclear magnetic resonance (NMR) measurements, we show that the local ordering of transition metal and Li layers (R3[combining macron]m structure) is well retained in the bulk material upon cycling. In complement to the bulk measurements, we locally probe the valence state distribution of cations and the surface structure of NMC particles using EELS and scanning transmission electron microscopy (STEM). The results reveal that the surface evolution of NMC is initiated in the first-charging step with a surface reduction layer formed at the particle surface. The NMC surface undergoes phase transformation from the layered structure to a poor electronic and ionic conducting transition-metal oxide rock-salt phase (R3[combining macron]m → Fm3[combining macron]m), accompanied by irreversible lithium and oxygen loss. In addition to the electrochemical cycling effect, electrolyte exposure also shows non-negligible influence on cathode surface degradation. These chemical and structural changes of the NMC cathode could contribute to the first-cycle coulombic inefficiency, restrict the charge transfer characteristics and ultimately impact the cell capacity.

Nanoscale Manipulation of Spinel Lithium Nickel Manganese Oxide Surface by Multisite Ti Occupation as High-Performance Cathode

A novel two-step surface modification method that includes atomic layer deposition (ALD) of TiO₂ followed by post-annealing treatment on spinel LiNi_0.5 Mn_1.5 O₄ (LNMO) cathode material is developed to optimize the performance. The performance improvement can be attributed to the formation of a TiMn₂ O₄ (TMO)-like spinel phase resulting from the reaction of TiO₂ with the surface LNMO. The Ti incorporation into the tetrahedral sites helps to combat the impedance growth that stems from continuous irreversible structural transition. The TMO-like spinel phase also alleviates the electrolyte decomposition during electrochemical cycling. 25 ALD cycles of TiO₂ growth are found to be the optimized parameter toward capacity, Coulombic efficiency, stability, and rate capability enhancement. A detailed understanding of this surface modification mechanism has been demonstrated. This work provides a new insight into the atomic-scale surface structural modification using ALD and post-treatment, which is of great importance for the future design of cathode materials.

Self-Similarity of Plasmon Edge Modes on Koch Fractal Antennas

We investigate the plasmonic behavior of Koch snowflake fractal geometries and their possible application as broadband optical antennas. Lithographically defined planar silver Koch fractal antennas were fabricated and characterized with high spatial and spectral resolution using electron energy loss spectroscopy. The experimental data are supported by numerical calculations carried out with a surface integral equation method. Multiple surface plasmon edge modes supported by the fractal structures have been imaged and analyzed. Furthermore, by isolating and reproducing self-similar features in long silver strip antennas, the edge modes present in the Koch snowflake fractals are identified. We demonstrate that the fractal response can be obtained by the sum of basic self-similar segments called characteristic edge units. Interestingly, the plasmon edge modes follow a fractal-scaling rule that depends on these self-similar segments formed in the structure after a fractal iteration. As the size of a fractal structure is reduced, coupling of the modes in the characteristic edge units becomes relevant, and the symmetry of the fractal affects the formation of hybrid modes. This analysis can be utilized not only to understand the edge modes in other planar structures but also in the design and fabrication of fractal structures for nanophotonic applications.