The influence of frequency and gravity on the orientation of active metallo-dielectric Janus particles translating under a uniform applied alternating-current electric field

Theoretical and numerical models of active Janus particles commonly assume that the metallo-dielectric interface is parallel to the driving applied electric field. However, our experimental observations indicate that the equilibrium angle of orientation of electrokinetically driven Janus particles varies as a function of the frequency and voltage of the applied electric field. Here, we quantify the variation of the orientation with respect to the electric field and demonstrate that the equilibrium position represents the interplay between gravitational, electrostatic and electrohydrodynamic torques. The latter two categories are functions of the applied field (frequency, voltage) as well as the height of the particle above the substrate. Maximum departure from the alignment with the electric field occurs at low frequencies characteristic of induced-charge electrophoresis and at low voltages where gravity dominates the electrostatic and electrohydrodynamic torques. The departure of the interface from alignment with the electric field is shown to decrease particle mobility through comparison of freely suspended Janus particles subject only to electrical forcing and magnetized Janus particles in which magnetic torque is used to align the interface with the electric field. Consideration of the role of gravitational torque and particle-wall interactions could account for some discrepancies between theory, numerics and experiment in active matter systems.

On-Chip Electrochemical Sensing with an Enhanced Detecting Signal Due to Concentration Polarization-Based Analyte Preconcentration

Here, we integrated two key technologies within a microfluidic system, an electrokinetic preconcentration of analytes by ion Concentration Polarization (CP) and local electrochemical sensors to detect the analytes, which can synergistically act to significantly enhance the detection signal. This synergistic combination, offering both decoupled and coupled operation modes for continuous monitoring, was validated by the intensified fluorescent intensities of CP-preconcentrated analytes and the associated enhanced electrochemical response using differential pulse voltammetry and chronoamperometry. The system performance was evaluated by varying the location of the active electrochemical sensor, target analyte concentrations, and electrolyte concentration using fluorescein molecules as the model analyte and Homovanillic acid (HVA) as the target bioanalyte within both phosphate-buffered saline (PBS) and artificial sweat solution. The combination of on-chip electrochemical sensing with CP-based preconcentration renders this generic approach adaptable to various analytes. This advanced system shows remarkable promise for enhancing biosensing detection in practical applications while bridging the gap between fundamental research and practical implementation.

Logic gating of low-abundance molecules using polyelectrolyte-based diodes

Bioinspired artificial ionic components are extensively utilized to mimic biological systems, as the vast majority of biological signaling is mediated by ions and molecules. Particular attention is given to nanoscale fluidic components where the ion transport can be regulated by the induced ion permselectivity. As a step from fundamentals toward ion-controlled devices, this study presents the use of ionic diodes made of oppositely charged polyelectrolytes, as a gate for low-abundance molecules. The use of ionic diodes that exhibited nonlinear current-voltage responses enabled realization of a basic Boolean operation of an ionic OR logic gate. Aside from the electrical response, the asymmetric ion transport through the diode was shown to affect the transport of low-abundance molecules across the diode, only allowing crossing when the diode was forward-biased. Integration of multiple diodes enabled implementation of an OR logic operation on both the voltage and the molecule transport, while obtaining electrical and optical output readouts that were associated with low and high logic levels. Similarly to electronics, implementation of logic gates opens up new functionalities of on-chip ionic computation via integrated circuits consisting of multiple basic logic gates.

Optoelectronic Trajectory Reconfiguration and Directed Self-Assembly of Self-Propelling Electrically Powered Active Particles

Self-propelling active particles are an exciting and interdisciplinary emerging area of research with projected biomedical and environmental applications. Due to their autonomous motion, control over these active particles that are free to travel along individual trajectories, is challenging. This work uses optically patterned electrodes on a photoconductive substrate using a digital micromirror device (DMD) to dynamically control the region of movement of self-propelling particles (i.e., metallo-dielectric Janus particles (JPs)). This extends previous studies where only a passive micromotor is optoelectronically manipulated with a translocating optical pattern that illuminates the particle. In contrast, the current system uses the optically patterned electrode merely to define the region within which the JPs moved autonomously. Interestingly, the JPs avoid crossing the optical region's edge, which enables constraint of the area of motion and to dynamically shape the JP trajectory. Using the DMD system to simultaneously manipulate several JPs enables to self-assemble the JPs into stable active structures (JPs ring) with precise control over the number of participating JPs and passive particles. Since the optoelectronic system is amenable to closed-loop operation using real-time image analysis, it enables exploitation of these active particles as active microrobots that can be operated in a programmable and parallelized manner.

Designing with Iontronic Logic Gates─From a Single Polyelectrolyte Diode to an Integrated Ionic Circuit

This article presents the implementation of on-chip iontronic circuits via small-scale integration of multiple ionic logic gates made of bipolar polyelectrolyte diodes. These ionic circuits are analogous to solid-state electronic circuits, with ions as the charge carriers instead of electrons/holes. We experimentally characterize the responses of a single fluidic diode made of a junction of oppositely charged polyelectrolytes (i.e., anion and cation exchange membranes), with a similar underlying mechanism as a solid-state p- and n-type junction. This served to carry out predesigned logical computations in various architectures by integrating multiple diode-based logic gates, where the electrical signal between the integrated gates was transmitted entirely through ions. The findings shed light on the limitations affecting the number of logic gates that can be integrated, the degradation of the electrical signal, their transient response, and the design rules that can improve the performance of iontronic circuits.

Microvalve-Based Tunability of Electrically Driven Ion Transport through a Microfluidic System with an Ion-Exchange Membrane

Microfluidic channels with an embedded ion permselective medium under the application of electric current are commonly used for electrokinetic processes as on-chip ion concentration polarization (ICP) and bioparticle preconcentration to enhance biosensing. Herein, we demonstrate the ability to dynamically control the electrically driven ion transport by integrating individually addressable microvalves. The microvalves are located along a main microchannel that is uniformly coated with a thin layer of an ion-exchange membrane (IEM). The interplay of ionic transport between the solution within the microchannel and the thin IEM, under an applied electric current, can be locally tuned by the deformation of the microvalve. This tunability provides a robust and simple means of implementing new functionalities into lab-on-a-chip devices, e.g., dynamic control over multiple ICP layers and their associated preconcentrated molecule plugs, multiplex sensing, suppression of biofouling, and plug dispersion, while maintaining the well-known application of microvalves as steric filtration.

A Magnetically and Electrically Powered Hybrid Micromotor in Conductive Solutions: Synergistic Propulsion Effects and Label-Free Cargo Transport and Sensing

Electrically powered micro- and nanomotors are promising tools for in vitro single-cell analysis. In particular, single cells can be trapped, transported, and electroporated by a Janus particle (JP) using an externally applied electric field. However, while dielectrophoretic (DEP)-based cargo manipulation can be achieved at high-solution conductivity, electrical propulsion of these micromotors becomes ineffective at solution conductivities exceeding ≈0.3 mS cm^-1 . Here, JP cargo manipulation and transport capabilities to conductive near-physiological (<6 mS cm^-1 ) solutions are extended successfully by combining magnetic field-based micromotor propulsion and navigation with DEP-based manipulation of various synthetic and biological cargos. Combination of a rotating magnetic field and electric field results in enhanced micromotor mobility and steering control through tuning of the electric field frequency. In addition, the micromotor's ability of identifying apoptotic cell among viable and necrotic cells based on their dielectrophoretic difference is demonstrated, thus, enabling to analyze the apoptotic status in the single-cell samples for drug discovery, cell therapeutics, and immunotherapy. The ability to trap and transport live cells towards regions containing doxorubicin-loaded liposomes is also demonstrated. This hybrid micromotor approach for label-free trapping, transporting, and sensing of selected cells within conductive solutions opens new opportunities in drug delivery and single-cell analysis, where close-to-physiological media conditions are necessary.

Electro-Orientation and Electro-Rotation of Metallodielectric Janus Particles

The electro-rotation (EROT) and electro-orientation (EOR) behavior of metallodielectric spherical Janus particles (JP) are studied analytically and verified experimentally. This stands in contrast to previous either heuristic or numerically computed models of JP dipoles. First, we obtain frequency-dependent analytic expressions for the corresponding dipole terms for a JP composed of dielectric and metallic hemispheres by applying the "standard" (weak-field) electrokinetic model and using a Fourier-Legendre collocation method for solving two sets of linear equations. EROT and EOR spectra, describing the variation of the JP's angular velocity on the forcing frequency of a rotating and nonrotating spatially uniform electric field, respectively, are explicitly determined and compared against experiments (different JP sizes and solution conductivities). While a favorably good agreement between theory and experimental measurements was found for the frequency response (∼8% difference), there is still a factor of ∼2 difference in the amplitude of the angular velocity, which necessitates further future improvements to the model.

Switching from Chemical to Electrical Micromotor Propulsion across a Gradient of Gastric Fluid via Magnetic Rolling

To address and extend the finite lifetime of Mg-based micromotors due to the depletion of the engine (Mg-core), we examine electric fields, along with previously studied magnetic fields, to create a triple-engine hybrid micromotor for driving these micromotors. Electric fields are a facile energy source that is not limited in its operation time and can dynamically tune the micromotor mobility by simply changing the frequency and amplitude of the field. Moreover, the same electrical fields can be used for cell trapping and transport as well as drug delivery. However, the limitations of these propulsion mechanisms are the low pH (and high conductivity) environment required for Mg dissolution, while the electrical propulsion is quenched at these conditions as it requires low conductivity mediums. In order to translate the micromotor between these two extreme medium conditions, we use magnetic rolling as means of self-propulsion along with magnetic steering. Interestingly, electrical propulsion also necessitates at least the partial consumption of the Mg, resulting in a sufficient geometrical asymmetry of the micromotor. We have successfully demonstrated the rapid propulsion switching capability of the micromotor, from chemical to electrical motions, via magnetic rolling within a microfluidic device with the concentration gradient of the simulated gastric fluid. Such triple-engine micromotor propulsion holds considerable promise for in vitro studies mimicking gastric conditions and performing various bioassay tasks.

P-015 Automated, efficient sorting of sperm using dielectrophoresis (DEP), utilizing the electrical properties of the tail as a biomarker of the viability, even for immotile cells

Study question

Developing a simple and automated method and device that sorts semen cell by cell for eventual application to retrieving rare sperm from severely oligozoospermic samples.

Summary answer

Over 90% of the viable cells in a sample can be sorted out from non-viable sperm cells and other debris using this method.

What is known already

The varying electrical properties of different cell types can result in unique frequency dependent dielectrophoretic (DEP) behavior when they are exposed to alternating current (AC). They are either repelled or attracted depending on their properties and the field frequency. This has been applied to sorting rare cells such as circulating tumor cells from blood. We have previously shown that the head and tail of human sperm have different electrical properties. As a result, at certain frequencies of an AC electric field the tails of viable cells (even immotile ones) are attracted to electric field gradients while the heads are distanced.

Study design, size, duration

Semen samples from several patients at Rambam medical center were collected and cryopreserved. Later the thawed semen samples were then tested in our sorting device. At least one hundred live cells were evaluated in each sample. The percentage of live cells that were successfully sorted out of the original mixture of live sperm cells, dead sperm cells and other debris was assessed.

Participants/materials, setting, methods

After thawing the samples were stained using CFDA and PI for visual live/dead identification (in actual practice no staining is necessary). The device consists of a polydimethylsiloxane (PDMS) microchannel on a glass slide patterned with Indium Tin Oxide (ITO) transparent electrodes. In the device the sperm are transferred to a low conductivity buffer. A curved electrode then sorts them out of the stream of the cell mixture to an alternate exit.

Main results and the role of chance

We have successfully demonstrated a new biomarker of live sperm (even immotile ones). The tails of live sperm have a positive (attractive) DEP response while dead sperm react negatively and are repelled from field gradients. At the specific frequencies used the head is simultaneously distanced from the electric fields helping to prevent damage to the DNA during the sorting.

We also showed that this effect could be used to sort sperm with over 90% efficiency from a sample with dead sperm and other debris. Since each cell passes the electrodes and is automatically sorted it could possibly be used for severely oligozoospermic and cryptozoospermic samples to find sperm and make more sperm available for more discriminatory sperm selection in such samples. Nowadays such samples are searched manually and the minute number of sperm present is often missed leading to a mistaken azoospermic diagnosis and possibly unnecessary surgery. The components are relatively low cost and the chips disposable allowing for wider implementation.

Significant progress was also made in preventing sperm from sticking to the substrates using coatings and a vibrational motor. Additionally, a proof of concept parallelization of the electrodes to increase the throughput was also demonstrated.

Limitations, reasons for caution

The inherent difficulty with microfluidic technologies is low throughput. Further work is needed to effectively parallelize and optimize the system. Effective pre-processing to clean the sample may also help to increase the throughput.

Wider implications of the findings

This biomarker can potentially be useful in determining an immotile cell’s viability for ICSI. This technology can also be of potential use for testicular tissue samples where there are many other cell types and debris and it is difficult to find rare sperm. Advanced sperm selection can also be incorporated.

Trial registration number

not applicable

The role of particle-electrode wall interactions in mobility of active Janus particles driven by electric fields

HYPOTHESIS

The interaction of active particles with walls can explain discrepancies between experiments and theory derived for particles in the bulk. For an electric field driven metallodielectric Janus particle (JP) adjacent to an electrode, interaction between the asymmetric particle and the partially screened electrode yields a net electrostatic force - termed self-dielectrophoresis (sDEP) - that competes with induced-charge electrophoresis (ICEP) to reverse particle direction.

EXPERIMENTS

The potential contribution of hydrodynamic flow to the reversal is evaluated by visualizing flow around a translating particle via micro-particle image velocimetry and chemically suppressing ICEP with poly(l-lysine)-g-poly(ethylene glycol) (PLL-PEG). Mobility of Polystyrene-Gold JPs is measured in KCl electrolytes of varying concentration and with a capacitive SiO₂ coating at the metallic JP surface or electrode. Results are compared with theory and numerical simulations accounting for electrode screening.

FINDINGS

PLL-PEG predominantly suppresses low-frequency mobility where propulsive electro-hydrodynamic jetting is observed; supporting the hypothesis of an electrostatic driving force at high frequencies. Simulations and theory show the magnitude, direction and frequency dispersion of JP mobility are obtained by superposition of ICEP and sDEP using the JP height and capacitance as fitting parameters. Wall proximity enhances ICEP and sDEP and manifests a secondary ICEP charge relaxation time dominating in the contact limit.

Dielectrophoretic Characterization of Dynamic Microcapsules and Their Magnetophoretic Manipulation

In this work, we present dielectrophoresis (DEP) and in situ electrorotation (ROT) characterization of reversibly stimuli-responsive "dynamic" microcapsules that change the physicochemical properties of their shells under varying pH conditions and can encapsulate and release (macro)molecular cargo on demand. Specifically, these capsules are engineered to open (close) their shell under high (low) pH conditions and thus to release (retain) their encapsulated load or to capture and trap (macro)molecular samples from their environment. We show that the steady-state DEP and ROT spectra of these capsules can be modeled using a single-shell model and that the conductivity of their shells is influenced most by the pH. Furthermore, we measured the transient response of the angular velocity of the capsules under rotating electric field conditions, which allows us to directly determine the characteristic time scales of the underlying physical processes. In addition, we demonstrate the magnetic manipulation of microcapsules with embedded magnetic nanoparticles for lab-on-chip tasks such as encapsulation and release at designated locations and the in situ determination of their physicochemical state using on-chip ROT. The insight gained will enable the advanced design and operation of these dynamic drug delivery and smart lab-on-chip transport systems.

Testis on a chip - a microfluidic 3-dimensional culture system for the development of spermatogenesisin-vitro

This research presents a novel Testis-on-a Chip- platform. Testicular cells are enzymatically isolated from the seminiferous tubules of sexually immature mice, seeded in a methylcellulose gel and cultured in a microfluidic chip. The unique design sandwiches the soft methylcellulose between stiffer agar support gels. The cells develop into organoids continuing to proliferate and differentiate. After seven weeks of culture the cells have over 95% viability. Confocal microscopy of the developed organoids reveals a structure containing the various stages of spermatogenesis up to and including meiosis II: premeiotic, meiotic and post-meiotic germ cells. The organoid structure also contains the supporting Sertoli and peritubular cells. The responsiveness of the system to the addition of testosterone and retinoic acid to the culture medium during the experiment are also investigated. As a benchmark, the Testis-on-a-Chip is compared to a conventional three-dimensional methylcellulose cell culture in a well plate. Analysis via FACS (Fluorescence-activated cell sorting) shows more haploid cells in the chip as compared to the plates. Immunofluorescence staining after seven weeks of culture shows more differentiated cells in the chip as compared to the well plate. This demonstrates the feasibility of our platform as well as its advantages. This research opens new horizons for the study and realization of spermatogenesis in-vitro. It can also enable the implementation of microfluidic technologies in future therapeutic strategies for pre pubertal male fertility preservation and adults with maturation arrest. Lastly, it can serve as a platform for drug and toxin testing.

Digital microfluidics-like manipulation of electrokinetically preconcentrated bioparticle plugs in continuous-flow

Herein, we demonstrate digital microfluidics-like manipulations of preconcentrated biomolecule plugs within a continuous flow that is different from the commonly known digital microfluidics involving discrete (i.e. droplets) media. This is realized using one- and two-dimensional arrays of individually addressable ion-permselective membranes with interconnecting microfluidic channels. The location of powered electrodes, dictates which of the membranes are active and generates either enrichment/depletion diffusion layers, which, in turn, control the location of the preconcentrated plug. An array of such powered membranes enables formation of multiple preconcentrated plugs of the same biosample as well as of preconcentrated plugs of multiple biosample types introduced via different inlets in a selective manner. Moreover, digital-microfluidics operations such as up-down and left-right translation, merging, and splitting, can be realized, but on preconcentrated biomolecule plugs instead of on discrete droplets. This technology, based on nanoscale electrokinetics of ion transport through permselective medium, opens future opportunities for smart and programmable digital-like manipulations of preconcentrated biological particle plugs for various on-chip biological applications.

Electrical Propulsion and Cargo Transport of Microbowl Shaped Janus Particles

Herein the effective electrical propulsion, cargo trapping, and transport capabilities of microbowl-shaped Janus particles (JPs) are demonstrated and evaluated. These active JPs are made by deposition of Au and Ti layers onto sacrificial spherical polystyrene particles, followed by oxidation of the Ti to TiO₂ . In contrast to the commonly studied spherical JP, the dual broken symmetry of both geometrical and electrical properties of the microbowl renders a strong dependence of its mobility and cargo loading on the order of the layering of Au and TiO₂ . Specifically, an opposite direction of motion is obtained for interchanged layers of Au and TiO₂ , using only electrical propulsion as the sole mechanism of motion. The concave side of the microbowl exhibits a negative dielectrophoretic trap of large size wherein trapped cargo is protected from hydrodynamic shearing, leading to an enhanced cargo loading capacity compared to that obtained using common spherical JP. Such enhanced cargo capability of the microbowl along with the ease of engineering it by interchanging the order of the layers are very attractive for future in vitro biological and biomedical applications.

Micromotor-based localized electroporation and gene transfection of mammalian cells

Herein, we studied localized electroporation and gene transfection of mammalian cells using a metallodielectric hybrid micromotor that is magnetically and electrically powered. Much like nanochannel-based, local electroporation of single cells, the presented micromotor was expected to increase reversible electroporation yield, relative to standard electroporation, as only a small portion of the cell's membrane (in contact with the micromotor) is affected. In contrast to methods in which the entire membrane of all cells within the sample are electroporated, the presented micromotor can perform, via magnetic steering, localized, spatially precise electroporation of the target cells that it traps and transports. In order to minimize nonselective electrical lysis of all cells within the chamber, resulting from extended exposure to an electrical field, magnetic propulsion was used to approach the immediate vicinity of the targeted cell, after which short-duration, electric-driven propulsion was activated to enable contact with the cell, followed by electroporation. In addition to local injection of fluorescent dye molecules, we demonstrated that the micromotor can enhance the introduction of plasmids into the suspension cells because of the dielectrophoretic accumulation of the plasmids in between the Janus particle and the attached cell prior to the electroporation step. Here, we chose a different strategy involving the simultaneous operation of many micromotors that are self-propelling, without external steering, and pair with cells in an autonomic manner. The locally electroporated suspension cells that are considered to be very difficult to transfect were shown to express the transfected gene, which is of significant importance for molecular biology research.

Rational Design of Self-Propelling Particles for Unified Cargo Loading and Transportation

Recent studies on electrically powered active particles that can both self-propel and manipulate cargo load and release, have focused on both spherically shaped Janus particles (JP) and on a parallel electrically conducting plates setup. Yet, spherically shaped JPs set a geometrical limitation on the ability to smartly design multiple dielectrophoretic traps on a single active particle. Herein, these active carriers are extended to accommodate any desired shape and selective metallic coating, using a standard photolithography method. The resulting designed positive and negative dielectrophoretic traps of controlled size, location, and intensity, performed as sophisticated active carriers with a high level of control over their mobility and cargo loading. In addition to cargo loading, the engineered particles exhibit interesting motion in an electrically insulating substrate setup, with in-plane electric field, and, in particular, a tilt angle, and even flipping, that strongly depended on the field frequency and amplitude, hence, exhibiting a much more diverse and rich behavior than spherical JP. The engineered self-propelling carriers are expected to open up new possibilities for unified, label-free and selective cargo loading, transport, and delivery of complex multi-particles.

Tunable Nanochannels Connected in Series for Dynamic Control of Multiple Concentration-Polarization Layers and Preconcentrated Molecule Plugs

Integration of ionic permselective medium (e.g., nanochannels, membranes) within microfluidic channels has been shown to enable on-chip desalination, sample purification, bioparticle sorting, and biomolecule concentration for enhanced detection sensitivity. However, the ion-permselective mediums are generally of fixed properties and cannot be dynamically tuned. Here we study a microfluidic device consisting of an array of individually addressable elastic membranes connected in series on top of a single microfluidic channel that can be deformed to locally reduce the channel cross-section into a nanochannel. Dynamic tunability of the ion-permselective medium, as well as controllability of its location and ionic permselectivity, introduces a new functionality to microfluidics-based lab-on-a-chip devices, for example, dynamic localization of preconcentrated biomolecule plugs at different sensing regions for multiplex detection. Moreover, the ability to simultaneously form a series of preconcentrated plugs at desired locations increases parallelization of the system and the trapping efficiency of target analytes.

Periodic concentration-polarization-based formation of a biomolecule preconcentrate for enhanced biosensing

Ionic concentration-polarization (CP)-based biomolecule preconcentration is an established method for enhancing the detection sensitivity of target biomolecules. However, the formed preconcentrated biomolecule plug rapidly sweeps over the surface-immobilized antibodies, resulting in a short-term overlap between the capture agent and the analyte, and subsequently suboptimal binding. To overcome this, we designed a setup allowing for the periodic formation of a preconcentrated biomolecule plug by activating the CP for predetermined on/off intervals. This work demonstrated the feasibility of cyclic CP actuation and optimized the sweeping conditions required to obtain the maximum retention time of a preconcentrated plug over a desired sensing region and enhanced detection sensitivity. The ability of this method to efficiently preconcentrate different analytes and to successfully increase immunoassay sensitivity underscore its potential in immunoassays serving the clinical and food testing industries.

Active Particle Based Selective Transport and Release of Cell Organelles and Mechanical Probing of a Single Nucleus

Self-propelling micromotors are emerging as a promising microscale tool for single-cell analysis. The authors have recently shown that the field gradients necessary to manipulate matter via dielectrophoresis can be induced at the surface of a polarizable active ("self-propelling") metallo-dielectric Janus particle (JP) under an externally applied electric field, acting essentially as a mobile floating microelectrode. Here, the application of the mobile floating microelectrode to trap and transport cell organelles in a selective and releasable manner is successfully extended. This selectivity is driven by the different dielectrophoretic (DEP) potential wells on the JP surface that is controlled by the frequency of the electric field, along with the hydrodynamic shearing and size of the trapped organelles. Such selective and directed loading enables purification of targeted organelles of interest from a mixed biological sample while their dynamic release enables their harvesting for further analysis such as gene/RNA sequencing or proteomics. Moreover, the electro-deformation of the trapped nucleus is shown to be in correlation with the DEP force and hence, can act as a promising label-free biomechanical marker. Hence, the active carrier constitutes an important and novel ex vivo platform for manipulation and mechanical probing of subcellular components of potential for single cell analysis.

Micromotor-Based Biosensing Using Directed Transport of Functionalized Beads

Previous micromotor-based biosensing studies used to functionalize the surface of the micromotor with specific molecular probes for binding of target analyte, thus limiting the use of the micromotor for the specific target. In contrast, here, we introduce a novel approach of using a nonfunctionalized micromotor as a generic cargo carrier being able to perform label-free and dynamic loading, transport, and release of functionalized beads. Hence, such an approach enables one to use the same micromotor system for sensing of varying targets via different commercially available functionalized beads, demonstrating the use of micromotors as a practical and versatile means for biosensing. We have also introduced a simplified microfluidic design that can be used for immunosensing or DNA binding tests without necessity for complicated fluid handling (buffer exchange, washing, etc.) steps. We expect this approach to open up new realizations of simplified and generic biosensing platforms.

Active particles as mobile microelectrodes for selective bacteria electroporation and transport

Self-propelling micromotors are emerging as a promising micro- and nanoscale tool for single-cell analysis. We have recently shown that the field gradients necessary to manipulate matter via dielectrophoresis can be induced at the surface of a polarizable active ("self-propelling") metallodielectric Janus particle (JP) under an externally applied electric field, acting essentially as a mobile floating microelectrode. Here, we successfully demonstrated that the application of an external electric field can singularly trap and transport bacteria and can selectively electroporate the trapped bacteria. Selective electroporation, enabled by the local intensification of the electric field induced by the JP, was obtained under both continuous alternating current and pulsed signal conditions. This approach is generic and applicable to bacteria and JP, as well as a wide range of cell types and micromotor designs. Hence, it constitutes an important and novel experimental tool for single-cell analysis and targeted delivery.

Analysis of Cargo Loading Modes and Capacity of an Electrically-Powered Active Carrier

The use of active colloids for cargo transport offers unique potential for applications ranging from targeted drug delivery to lab-on-a-chip systems. Previously, Janus particles (JPs), acting as mobile microelectrodes, have been shown to transport cargo which is trapped at the JP surface by a dielectrophoretic mechanism. Herein, we aim to characterize the cargo loading properties of mobile Janus carriers, across a broad range of frequencies and voltages. In expanding the frequency range of the carrier, we are able to compare the influences of different modes of carrier transport on the loading capacity as well as highlight the differences between cargo trapped by positive and negative dielectrophoresis. Specifically, it is shown that cargo trapping results in a reduction in carrier velocities with this effect more pronounced at low frequencies where cargo is trapped close to the substrate. Interestingly, we observe the existence of a maximum cargo loading capacity which decreases at large voltages suggesting a strong interplay between trapping and hydrodynamic shear. Finally, we demonstrate that the control of the frequency can enable different assemblies of binary colloidal solutions on the JP. The resultant findings enable the optimization of electrokinetic cargo transport and its selective application to a broad range of targets.

Tunable Electrorheological Fluid Microfluidic Rectifier: Irreversibility of Viscous Flow Due to Spatial Asymmetry Induced Memory Effects

Because of the reversibility of viscous flow it is not expected to obtain a fluidic rectifier simply from geometrical asymmetry without any moving mechanical parts. Here, we found a counterexample by using spatial asymmetry combined with an electric field to inject memory effects that render the flow irreversible. This stems from the strong dependency of the electrorheological fluid particle chaining on the flow direction. A funnel-shaped microfluidic rectifier with electrorheological fluid has been shown to be easily and rapidly tuned via the applied electric field to achieve an almost order of magnitude rectification along with pressure oscillations. These findings are of importance for the realization of fluidic diodes, rectifiers, and ratchets.

Significant enhancement of the electrorheological effect by non-straight electrode geometry

In contrast to the commonly used straight electrodes with electrorheological (ER) fluid, here, we studied the effect of non-straight electrodes comprising the sides of a microchannel, on the ER fluid response. A more than one order of magnitude enhancement of the apparent viscosity was observed for non-straight electrode geometries, where castellated and sawtooth electrode geometries were used merely as an example, relative to that measured for straight electrodes. The enhancement increased with increasing applied voltage and exhibited a distinct maximum in the frequency range of 5-10 Hz. Experimental analyses demonstrated that positive dielectrophoresis-driven attraction of the chain ends to the sharp tips of the electrode underlies the ER enhancement. Hence, introducing such uniformity breakage of the electric field through non-straight electrode geometries is of practical importance for enhancement of the ER response.

Novel Electrochemical Flow Sensor Based on Sensing the Convective-Diffusive Ionic Concentration Layer

Presented is a novel flow sensor based on electrochemical sensing of the ionic concentration-polarization (CP) layer developed within a microchannel-ion permselective membrane device. To demonstrate the working principle of the electrochemical flow sensor, the effect of advection on the transient and steady-state ionic concentration-polarization (CP) phenomenon in microchannel-Nafion membrane systems is studied. In particular, we focused on the local impedance, measured using an array of electrode pairs embedded at the bottom of the microchannel, as well as the total current across the permselective medium, as two approaches for estimating the flow. We examined both a stepwise application of CP under steady-state flow and a stepwise application of flow under steady-state CP.

Combining dielectrophoresis and concentration polarization-based preconcentration to enhance bead-based immunoassay sensitivity

Ionic concentration-polarization (CP)-based biomolecule preconcentration is an established method for enhancing the detection sensitivity of a target biomolecule immunoassay. However, its main drawback lies in its inability to directly control the spatial overlap between the preconcentrated plug of biomolecules and the surface immobilized antibodies. To overcome this, we simultaneously preconcentrated freely suspended, surface functionalized nanoparticles and target molecules along the edge of a depletion layer, thus, increasing the binding kinetics and avoiding the need to tune their relative locations to ensure their spatial overlap. After the desired incubation time, the nanoparticles were dielectrophoretically trapped for postprocessing analysis of the binding signal. This novel combination of CP-based preconcentration and dielectrophoresis (DEP) was demonstrated through binding of avidin and biotin-conjugated particles as a model bead-based immunoassay, wherein increased detection sensitivity was demonstrated compared to an immunoassay without CP-based preconcentration. The DEP trapping of the beads following binding is important not only for an enhanced detection signal due to the preconcentration of the beads at the electrode edges but also for controlling their location for future applications integrating localized sensors. In addition, DEP may be important also as a preprocessing step for controlling the number of beads participating in the immunoassay.

Distinct and independent dielectrophoretic behavior of the head and tail of sperm and its potential for the safe sorting and isolation of rare spermatozoa

Often, in semen samples with minute amounts of sperm, even the single spermatozoon required to fertilize an oocyte cannot be found in the ejaculate. This is primarily because currently, sperm is generally searched for manually under a microscope. In this study, dielectrophoresis (DEP) was investigated as an alternative automated technique for sorting sperm cells. Using a quadrupolar electrode array it was shown that the head and tail of the sperm had independent and unique crossover frequencies corresponding to the transition of the DEP force from repulsive (negative) to attractive (positive). These surprising results were further analyzed, showing that the head and tail have their own distinct electrical properties. This significant result allows for the sperm's head, which contains the DNA, to be distanced from potentially damaging high electric fields using negative DEP while simultaneously manipulating and sorting the sperm using the positive DEP response of the tail. A proof of concept sorting chip was designed and tested. The low crossover frequency of the tail also allows for the use of a higher conductivity, and thus more physiological, medium than the conventional DEP solutions. Although more research is required to design and optimize an efficient, user-friendly, and high-throughput device, this research is a proof of concept that DEP has the potential to automate and improve the processing of semen samples, especially those containing only rare spermatozoa.

Transient response of nonideal ion-selective microchannel-nanochannel devices

We report evidence of variation in ion selectivity of a fabricated microchannel-nanochannel device resulting in the appearance of a distinct local maximum in the overlimiting chronopotentiometric response. In this system consisting of shallow microchannels joined by a nanochannel, viscous shear at the microchannel walls suppresses the electro-osmotic instability and prevents any associated contribution to the nonmonotonic response. Thus, this response is primarily electrodiffusive. Numerical simulations indicate that concentration polarization develops not only within the microchannel but also within the nanochannel itself, with a local voltage maximum in the chronopotentiometric response correlated with interfacial depletion and having the classic i^{-2} Sands time dependence. Furthermore, the occurrence of the local maxima is correlated with the change in selectivity due to internal concentration polarization. Understanding the transient nonideal permselective response is essential for obtaining fundamental insight and for optimizing efficient operation of practical fabricated nanofluidic and membrane devices.

Electrothermal based active control of ion transport in a microfluidic device with an ion-permselective membrane

The ability to induce regions of high and low ionic concentrations adjacent to a permselective membrane or a nanochannel subject to an externally applied electric field (a phenomenon termed concentration-polarization) has been used for a broad spectrum of applications ranging from on-chip desalination, bacteria filtration to biomolecule preconcentration. But these applications have been limited by the ability to control the length of the diffusion layer that is commonly indirectly prescribed by the fixed geometric and surface properties of a nanofluidic system. Here, we demonstrate that the depletion layer can be dynamically varied by inducing controlled electrothermal flow driven by the interaction of temperature gradients with the applied electric field. To this end, a series of microscale heaters, which can be individually activated on demand are embedded at the bottom of the microchannel and the relationship between their activation and ionic concentration is characterized. Such spatio-temporal control of the diffusion layer can be used to enhance on-chip electro-dialysis by producing shorter depletion layers, to dynamically reduce the microchannel resistance relative to that of the nanochannel for nanochannel based (bio)sensing, to generate current rectification reminiscent of a diode like behavior and control the location of the preconcentrated plug of analytes or the interface of brine and desalted streams.

The nematocyst's sting is driven by the tubule moving front

The nematocyst is the explosive injection system of the phylum Cnidaria, and is one of the fastest delivery systems found in Nature. Exploring its injection mechanism is key for understanding predator-prey interactions and protection against jellyfish stinging. Here we analyse the injection of jellyfish nematocysts and ask how the build-up of the poly-γ-glutamate (pγGlu) osmotic potential inside the nematocyst drives its discharge. To control the osmotic potential, we used a two-channel microfluidic system to direct the elongating nematocyst tubule through oil, where no osmotic potential can develop, while keeping the nematocyst capsule in water at all times. In addition, the flow inside the tubule and the pγGlu concentration profiles were calculated by applying a one-dimensional mathematical model. We found that tubule elongation through oil is orders of magnitude slower than through water and that the injection rate of the nematocyst content is reduced. These results imply that the capsule's osmotic potential is not sufficient to drive the tubule beyond the initial stage. Our proposed model shows that the tubule is pulled by the high osmotic potential that develops at the tubule moving front. This new understanding is vital for future development of nematocyst-based systems such as osmotic nanotubes and transdermal drug delivery.

Effect of advection on transient ion concentration-polarization phenomenon

Here, we studied the effect of advection on the transient ion concentration-polarization phenomenon in microchannel-membrane systems. Specifically, the temporal evolution of the depletion layer in a system that supports net flow rates with varying Péclet values was examined. Experiments complemented with simplified analytical one-dimensional semi-infinite modeling and numerical simulations demonstrated either suppression or enhancement of the depletion layer propagation against or with the direction of the net flow, respectively. Of particular interest was the third-species fluorescent dye ion concentration-polarization dynamics which was further explained using two-dimensional numerical simulations that accounted for the device complex geometry.

Dielectrophoretic characterization and isolation of jellyfish stinging capsules

Jellyfish stinging capsules known as nematocysts are explosive, natural-injection systems with high potential as a natural drug-delivery system. These organelles consist of a capsule containing a highly folded thin needle-like tubule and a matrix highly concentrated with charged constituents that enable the tubule to fire and penetrate a target. For the purpose of using these nematocysts as drug delivery system it is first required to purify subpopulations from heterogeneous population of capsules and to investigate each subpopulation's distinct function and characteristics. Here, the nematocysts' dielectric properties were experimentally investigated using dielectrophoretic and electrorotational spectra with best fits derived from theoretical models. The dielectric characterization adds to our understanding of the nematocysts' structure and function and is necessary for the dielectrophoretic isolation and manipulation of populations. As expected, the effect of monovalent and divalent exchange cations resulted in higher inner conductivity for the NaCl treated capsules; this result stands in agreement with their relative higher osmotic pressure. In addition, an efficient dielectrophoretic isolation of different nematocyst subpopulations was demonstrated, paving the way to an understanding of nematocysts' functional diversity and the development of an efficient drug delivery platform.

Myxozoan polar tubules display structural and functional variation

BACKGROUND

Myxozoa is a speciose group of endoparasitic cnidarians that can cause severe ecological and economic effects. Although highly reduced compared to free-living cnidarians, myxozoans have retained the phylum-defining stinging organelles, known as cnidae or polar capsules, which are essential to initiating host infection. To explore the adaptations of myxozoan polar capsules, we compared the structure, firing process and content release mechanism of polar tubules in myxospores of three Myxobolus species including M. cerebralis, the causative agent of whirling disease.

RESULTS

We found novel functions and morphologies in myxozoan polar tubules. High-speed video analysis of the firing process of capsules from the three Myxobolus species showed that all polar tubules rapidly extended and then contracted, an elasticity phenomenon that is unknown in free-living cnidarians. Interestingly, the duration of the tubule release differed among the three species by more than two orders of magnitude, ranging from 0.35 to 10 s. By dye-labeling the polar capsules prior to firing, we discovered that two of the species could release their entire capsule content, a delivery process not previously known from myxozoans. Having the role of content delivery and not simply anchoring suggests that cytotoxic or proteolytic compounds may be present in the capsule. Moreover, while free-living cnidarians inject most of the toxic content through the distal tip of the tubule, our video and ultrastructure analyses of the myxozoan tubules revealed patterns of double spirals of nodules and pores along parts of the tubules, and showed that the distal tip of the tubules was sealed. This helical pattern and distribution of openings may minimize the tubule mechanical weakness and improve resistance to the stress impose by firing. The finding that myxozoan tubule characteristics are very different from those of free-living cnidarians is suggestive of their adaptation to parasitic life.

CONCLUSIONS

These findings show that myxozoan polar tubules have more functions than previously assumed, and provide insight into their evolution from free-living ancestors.

Propulsion of Active Colloids by Self-Induced Field Gradients

Previously, metallodielectric Janus particles have been shown to travel with their dielectric hemisphere forward under low frequency applied electric fields as a result of asymmetric induced-charge electroosmotic flow. Here, it is demonstrated that at high frequencies, well beyond the charge relaxation time of the electric double layer induced around the particle, rather than the velocity decaying to zero, the Janus particles reverse direction, traveling with their metallic hemisphere forward. It is proposed that such motion is the result of a surface force, arising from localized nonuniform electric field gradients, induced by the dual symmetry-breaking of an asymmetric particle adjacent to a wall, which act on the induced dipole of the particle to drive net motion even in a uniform AC field. Although the field is external, since the driving gradient is induced on the particle level, it may be considered an active colloid. We have thus termed this propulsion mechanism "self-dielectrophoresis", to distinguish from traditional dielectrophoresis where the driving nonuniform field is externally fixed and the particle direction is restricted. It is demonstrated theoretically and experimentally that the critical frequency at which the particle reverses direction can be characterized by a nondimensional parameter which is a function of electrolyte concentration and particle size.

Robust ion current oscillations under a steady electric field: An ion channel analog

We demonstrate a nonlinear, nonequilibrium field-driven ion flux phenomenon, which unlike Teorell's nonlinear multiple field theory, requires only the application of one field: robust autonomous current-mass flux oscillations across a porous monolith coupled to a capillary with a long air bubble, which mimics a hydrophobic protein in an ion channel. The oscillations are driven by the hysteretic wetting dynamics of the meniscus when electro-osmotic flow and pressure driven backflow, due to bubble expansion, compete to approach zero mass flux within the monolith. Delayed rupture of the film around the advancing bubble cuts off the electric field and switches the monolith mass flow from the former to the latter. The meniscus then recedes and repairs the rupture to sustain an oscillation for a range of applied fields. This generic mechanism shares many analogs with current oscillations in cell membrane ion channel. At sufficiently high voltage, the system undergoes a state transition characterized by appearance of the ubiquitous 1/f power spectrum.

Effect of field-focusing and ion selectivity on the extended space charge developed at the microchannel-nanochannel interface

We present results demonstrating the effect of varying microchannel depth and bulk conductivity on the space charge-mediated transition between classical, diffusion-limited current and over-limiting current in microchannel-nanochannel devices. The extended space charge layer develops at the depleted microchannel-nanochannel entrance when the limiting current is exceeded and is correlated with a distinctive maximum in the dc resistance. This maximum is shown to be affected by the microchannel depth, via field-focusing, and solution conductivity. In particular, we observe that upon their increase, the maximum becomes flatter and shifts to higher voltages.

Induced-charge electrokinetics, bipolar current, and concentration polarization in a microchannel-Nafion-membrane system

The presence of a floating electrode array located within the depletion layer formed due to concentration polarization across a microchannel-membrane interface device may produce not only induced-charge electro-osmosis (ICEO) but also bipolar current resulting from the induced Faradaic reaction. It has been shown that there exists an optimal thickness of a thin dielectric coating that is sufficient to suppress bipolar currents but still enables ICEO vortices that stir the depletion layer, thereby affecting the system's current-voltage response. In addition, the use of alternating-current electro-osmosis by activating electrodes results in further enhancement of the fluid stirring and opens new routes for on-demand spatiotemporal control of the depletion layer length.

Characterization of the near-field and convectional transport behavior of micro and nanoparticles in nanoscale plasmonic optical lattices

Here, we report the characterization of the transport of micro- and nanospheres in a simple two-dimensional square nanoscale plasmonic optical lattice. The optical potential was created by exciting plasmon resonance by way of illuminating an array of gold nanodiscs with a loosely focused Gaussian beam. This optical potential produced both in-lattice particle transport behavior, which was due to near-field optical gradient forces, and high-velocity (∼μm/s) out-of-lattice particle transport. As a comparison, the natural convection velocity field from a delocalized temperature profile produced by the photothermal heating of the nanoplasmonic array was computed in numerical simulations. This work elucidates the role of photothermal effects on micro- and nanoparticle transport in plasmonic optical lattices.

Interplay between Nanochannel and Microchannel Resistances

Current nanochannel system paradigm commonly neglects the role of the interfacing microchannels and assumes that the ohmic electrical response of a microchannel-nanochannel system is solely determined by the geometric properties of the nanochannel. In this work, we demonstrate that the overall response is determined by the interplay between the nanochannel resistance and various microchannel attributed resistances. Our experiments confirm a recent theoretical prediction that in contrast to what was previously assumed at very low concentrations the role of the interfacing microchannels on the overall resistance becomes increasingly important. We argue that the current nanochannel-dominated conductance paradigm can be replaced with a more correct and intuitive microchannel-nanochannel-resistance-model-based paradigm.