Infrared Thermography Shows That a Temperature Difference of 2.2°C (4°F) or Greater Between Corresponding Sites of Neuropathic Feet Does Not Always Lead to a Diabetic Foot Ulcer

BACKGROUND

There is emerging interest in the application of foot temperature monitoring as means of diabetic foot ulcer (DFU) prevention. However, the variability in temperature readings of neuropathic feet remains unknown. The aim of this study was to analyze the long-term consistency of foot thermograms of diabetic feet at the risk of DFU.

METHODS

A post-hoc analysis of thermal images of 15 participants who remained ulcer-free during a 12-month follow-up were unblinded at the end of the trial. Skin foot temperatures of 12 plantar, 15 dorsal, 3 lateral, and 3 medial regions of interests (ROIs) were derived on monthly thermograms. The temperature differences (∆Ts) of corresponding ROIs of both feet were calculated.

RESULTS

Over the 12-month study period, out of the total 2026 plantar data points, 20.3% ROIs were rated as abnormal (absolute ∆T ≥ 2.2°C). There was a significant between-visit variability in the proportion of plantar ROIs with ∆T ≥ 2.2°C (range 7.6%-30.8%, chi-square test, P = .001). The proportion of patients presenting with hotspots (ROIs with ∆T ≥ 2.2°C), abnormal plantar foot temperature (mean ∆T of 12 plantar ROIs ≥ 2.2°C), and abnormal whole foot temperature (mean ∆T of 33 ROIs ≥ 2.2°C) varied between visits and showed no pattern (P > .05 for all comparisons). This variability was not related to the season of assessment.

CONCLUSIONS

Despite the high rate of hotspots on monthly thermograms, all feet remained intact. This study underscores a significant between-visit inconsistency in thermal images of neuropathic feet which should be considered when planning DFU-prevention programs for self-testing and behavior modification.

Quantitative Thermal Imaging

Quantitative thermal imaging, the measurement of temperature by use of thermal imaging devices, is reviewed here from a metrological perspective with a focus on measurement confidence and system application to fields such as condition monitoring and healthcare diagnostics. Thermal imaging has seen greatly increased application for the measurement of temperature following dramatic improvements in practicality and price. Selected thermal imaging systems are reviewed here by providing some example measurements outputs from devices, highlighting their outcomes on measurement confidence and impact on practical use, such as in condition monitoring and healthcare diagnostics.

The Kelvin Redefinition and Practical Primary Thermometry

In May 2019 four of the seven base units of the International System of Units (the SI) were redefined and are now founded on defined values of fundamental physical constants. One of these was the kelvin which is no longer defined by the triple point of water but instead through a fixed value of the Boltzmann constant. In this paper the kelvin redefinition is introduced and the implications for temperature traceability and practical temperature sensing discussed. This will include outlining new approaches for temperature traceability, as well as discussing the rise of in process calibration through practical primary temperature sensing approaches (where, in principle, no sensor calibration is required). These forthcoming changes are likely to have significant impact on everyone in the temperature calibration chain, whilst the advent of in process temperature calibration should lead to step change improvements in process control, energy efficiency and product quality consistency and will help facilitate autonomous production.

Step-Change Improvements in Traceable Process Control Thermometry

Measurement and control of process temperature is key to maximising product quality, optimising efficiency, reducing waste, safety, and minimising CO2 and other harmful emissions. Drift of temperature sensor calibration due to environmental factors such as high temperature, vibration, contamination and ionizing radiation results in a progressively worsening temperature measurement error, which in turn results in sub-optimal processes. Here we outline some new developments to overcome sensor calibration drift and so provide assured temperature measurement in process, including self-validating thermocouples, embedded temperature reference standards, and practical primary Johnson noise thermometry where the temperature is measured directly without the need for any calibration. These new developments will give measurement assurance by either providing measurements which are inherently stable, or by providing an in-situ calibration facility to enable the detection and correction of calibration drift.

Is current body temperature measurement practice fit-for-purpose?

There has been a marked rise in the number of avoidable deaths in health services around the world. At the same time there has been a growing increase in antibiotic resistant so-called "superbugs." We examine here the potential role of body temperature measurement in these adverse trends. Electronic based thermometers have replaced traditional mercury (and other liquid-in-glass type) thermometers for reasons of safety rather than superiority. Electronic thermometers are in general less robust from a measurement perspective than their predecessors. We illustrate the implications of unreliable temperature measurement on the diagnosis and management of disease, including COVID-19, through statistical calculations. Since a return to mercury thermometers is both undesirable and impractical, we call for better governance in the current practice of clinical thermometry to ensure the traceability and long-term accuracy of electronic thermometers and discuss how this could be achieved.

Infrared thermography and ulcer prevention in the high-risk diabetic foot: data from a single-blind multicentre controlled clinical trial

AIM

To assess the usefulness of monthly thermography and standard foot care to reduce diabetic foot ulcer recurrence.

METHODS

People with diabetes (n = 110), neuropathy and history of ≥ 1 foot ulcer participated in a single-blind multicentre clinical trial. Feet were imaged with a novel thermal imaging device (Diabetic Foot Ulcer Prevention System). Participants were randomized to intervention (active thermography + standard foot care) or control (blinded thermography + standard foot care) and were followed up monthly until ulcer recurrence or for 12 months. Foot thermograms of participants from the intervention group were assessed for hot spots (areas with temperature ≥ 2.2°C higher than the corresponding contralateral site) and acted upon as per local standards.

RESULTS

After 12 months, 62% of participants were ulcer-free in the intervention group and 56% in the control group. The odds ratios of ulcer recurrence (intervention vs control) were 0.82 (95% CI 0.38, 1.8; P = 0.62) and 0.55 (95% CI 0.21, 1.4; P = 0.22) in univariate and multivariate logistic regression analyses, respectively. The hazard ratios for the time to ulcer recurrence (intervention vs control) were 0.84 (95% CI 0.45, 1.6; P = 0.58) and 0.67 (95% CI 0.34, 1.3; P = 0.24) in univariate and multivariate Cox regression analyses, respectively.

CONCLUSIONS

Monthly intervention with thermal imaging did not result in a significant reduction in ulcer recurrence rate or increased ulcer-free survival in this cohort at high risk of foot ulcers. This trial has, however, informed the design of a refined study with longer follow-up and group stratification, further aiming to assess the efficacy of thermography to reduce ulcer recurrence.

Between visit variability of thermal imaging of feet in people attending podiatric clinics with diabetic neuropathy at high risk of developing foot ulcers

OBJECTIVE

People with diabetic neuropathy who have previously ulcerated are at high risk of re-ulceration. They should regularly attend podiatry clinics for surveillance and routine protective podiatric treatment. It has been suggested that inflammation prior to skin breakdown shows up as a hotspot on a thermal image even in the absence of clinical signs. The aim of this study is to quantify inter-patient and intra-patient thermal variations presented by diabetic feet at high risk of ulceration.

APPROACH

Whole foot and spot temperatures were recorded for 96 patients who attended two successive podiatry appointments without ulceration 28 [28, 31] days apart, median [interquartile range]. This was a part of a longer study into whether thermal imaging in clinic can reduce the rate of re-ulceration.

MAIN RESULTS

The variation in spot temperature right/left differences for single patients between visits was comparable to the variation observed between patients (0.8 [0.3, 1.5] °C compared with 0.9 [0.4, 1.7] °C). Similarly, whole foot temperature variation for a single patient between visits was comparable to the variation observed between patients (0.6 [0.2, 1.1] °C compared with 0.8 [0.2, 1.3] °C).

SIGNIFICANCE

Thresholds which depend on thermal differences from visit to visit are unlikely to have sufficient specificity to effectively target treatment designed to prevent the development of foot ulcers.

NPL contributions to the standardisation and validation of contemporary medical thermometry methods

Since the advent of reliable mercury-in-glass thermometers in the latter part of the 19th century the practice of clinical thermometry was thought to be a solved issue. However with advances in technology there has, in recent decades, been a proliferation of temperature measurement methods applied to medical science. Many of these have been introduced because of the clinical benefit they confer, nevertheless, in some cases the metrological foundation and infrastructure to ensure sound measurement was not in place. This paper will focus on the standardisation activity undertaken by the UK's National Physical Laboratory (NPL) to support reliable temperature measurement, using a number of innovative methods, in a clinical setting.

Reliability of a novel thermal imaging system for temperature assessment of healthy feet

Background

Thermal imaging is a useful modality for identifying preulcerative lesions (“hot spots”) in diabetic foot patients. Despite its recognised potential, at present, there is no readily available instrument for routine podiatric assessment of patients at risk. To address this need, a novel thermal imaging system was recently developed. This paper reports the reliability of this device for temperature assessment of healthy feet.

Methods

Plantar skin foot temperatures were measured with the novel thermal imaging device (Diabetic Foot Ulcer Prevention System (DFUPS), constructed by Photometrix Imaging Ltd) and also with a hand-held infrared spot thermometer (Thermofocus® 01500A3, Tecnimed, Italy) after 20 min of barefoot resting with legs supported and extended in 105 subjects (52 males and 53 females; age range 18 to 69 years) as part of a multicentre clinical trial. The temperature differences between the right and left foot at five regions of interest (ROIs), including 1st and 4th toes, 1st, 3rd and 5th metatarsal heads were calculated. The intra-instrument agreement (three repeated measures) and the inter-instrument agreement (hand-held thermometer and thermal imaging device) were quantified using intra-class correlation coefficients (ICCs) and the 95% confidence intervals (CI).

Results

Both devices showed almost perfect agreement in replication by instrument. The intra-instrument ICCs for the thermal imaging device at all five ROIs ranged from 0.95 to 0.97 and the intra-instrument ICCs for the hand-held-thermometer ranged from 0.94 to 0.97. There was substantial to perfect inter-instrument agreement between the hand-held thermometer and the thermal imaging device and the ICCs at all five ROIs ranged between 0.94 and 0.97.

Conclusions

This study reports the performance of a novel thermal imaging device in the assessment of foot temperatures in healthy volunteers in comparison with a hand-held infrared thermometer. The newly developed thermal imaging device showed very good agreement in repeated temperature assessments at defined ROIs as well as substantial to perfect agreement in temperature assessment with the hand-held infrared thermometer. In addition to the reported non-inferior performance in temperature assessment, the thermal imaging device holds the potential to provide an instantaneous thermal image of all sites of the feet (plantar, dorsal, lateral and medial views).

Trial registration

Diabetic Foot Ulcer Prevention System NCT02317835, registered December 10, 2014

Comparison of non-contact infrared skin thermometers

Non-contact infra-red skin thermometers (NCITs) are becoming more prevalent for use in medical diagnostics. Not only are they used as an alternative means of estimating core body temperature but also to assess the diabetic foot for signs of inflammation prior to ulceration. Previous investigations have compared the performance of NCITs in a clinical setting against other gold standard methods. However, there have been no previous investigations comparing the performance of NCITs in assessing temperature measurement capability traceable to the International Temperature Scale of 1990 (ITS-90). A metrological assessment of nine common NCITs was carried out over the temperature range of 15-45 °C using the National Physical Laboratory's blackbody reference sources to identify their accuracy, repeatability, size-of-source and distance effects. The results are concerning in that five of the NCITs fell far outside the accuracy range stated by their manufacturers as well as the medical standard to which the NCITs are supposed to adhere. Furthermore, a 6 °C step change in measurement error over the temperature range of interest for the diabetic foot was found for one NCIT. These results have implications for all clinicians using NCITs for temperature measurement and demonstrate the need for traceable calibration to ITS-90.

The Boltzmann project

The International Committee for Weights and Measures (CIPM), at its meeting in October 2017, followed the recommendation of the Consultative Committee for Units (CCU) on the redefinition of the kilogram, ampere, kelvin and mole. For the redefinition of the kelvin, the Boltzmann constant will be fixed with the numerical value 1.380 649 × 10-23 J K-1. The relative standard uncertainty to be transferred to the thermodynamic temperature value of the triple point of water will be 3.7 × 10-7, corresponding to an uncertainty in temperature of 0.10 mK, sufficiently low for all practical purposes. With the redefinition of the kelvin, the broad research activities of the temperature community on the determination of the Boltzmann constant have been very successfully completed. In the following, a review of the determinations of the Boltzmann constant k, important for the new definition of the kelvin and performed in the last decade, is given.

Thermodynamic temperature assignment to the point of inflection of the melting curve of high-temperature fixed points

The thermodynamic temperature of the point of inflection of the melting transition of Re-C, Pt-C and Co-C eutectics has been determined to be 2747.84 ± 0.35 K, 2011.43 ± 0.18 K and 1597.39 ± 0.13 K, respectively, and the thermodynamic temperature of the freezing transition of Cu has been determined to be 1357.80 ± 0.08 K, where the ± symbol represents 95% coverage. These results are the best consensus estimates obtained from measurements made using various spectroradiometric primary thermometry techniques by nine different national metrology institutes. The good agreement between the institutes suggests that spectroradiometric thermometry techniques are sufficiently mature (at least in those institutes) to allow the direct realization of thermodynamic temperature above 1234 K (rather than the use of a temperature scale) and that metal-carbon eutectics can be used as high-temperature fixed points for thermodynamic temperature dissemination. The results directly support the developing mise en pratique for the definition of the kelvin to include direct measurement of thermodynamic temperature.

Dissemination of thermodynamic temperature above the freezing point of silver

The mise-en-pratique for the definition of the kelvin at high temperatures will formally allow dissemination of thermodynamic temperature either directly or mediated through high-temperature fixed points (HTFPs). In this paper, these two distinct dissemination methods are evaluated, namely source-based and detector-based. This was achieved by performing two distinct dissemination trials: one based on HTFPs, the other based on absolutely calibrated radiation thermometers or filter radiometers. These trials involved six national metrology institutes in Europe in the frame of the European Metrology Research Programme joint project 'Implementing the new kelvin' (InK). The results have shown that both dissemination routes are possible, with similar standard uncertainties of 1-2 K, over the range 1273-2773 K, showing that, depending on the facilities available in the laboratory, it will soon be possible to disseminate thermodynamic temperatures above 1273 K to users by either of the two methods with uncertainties comparable to the current temperature scale.

Progress towards the determination of thermodynamic temperature with ultra-low uncertainty

Previous research effort towards the determination of the Boltzmann constant has significantly improved the supporting theory and the experimental practice of several primary thermometry methods based on the measurement of a thermodynamic property of a macroscopic system at the temperature of the triple point of water. Presently, experiments are under way to demonstrate their accuracy in the determination of the thermodynamic temperature T over an extended range spanning the interval between a few kelvin and the copper freezing point (1358 K). We discuss how these activities will improve the link between thermodynamic temperature and the temperature as measured using the International Temperature Scale of 1990 (ITS-90) and report some preliminary results obtained by dielectric constant gas thermometry and acoustic gas thermometry. We also provide information on the status of other primary methods, such as Doppler broadening thermometry, Johnson noise thermometry and refractive index gas thermometry. Finally, we briefly consider the implications of these advancements for the dissemination of calibrated temperature standards.

Thermodynamic temperature by primary radiometry

Above the freezing temperature of silver (1234.93 K), the International Temperature Scale of 1990 (ITS-90) gives a temperature, T90, in terms of a defining fixed-point blackbody and Planck's law of thermal radiation in ratio form. Alternatively, by using Planck's law directly, thermodynamic temperature can be determined by applying radiation detectors calibrated in absolute terms for their spectral responsivity. With the advent of high-quality semiconductor photodiodes and the development of high-accuracy cryogenic radiometers during the last two decades radiometric detector standards with very small uncertainties in the range of 0.01-0.02% have been developed for direct, absolute radiation thermometry with uncertainties comparable to those for the realization of the ITS-90. This article gives an overview of a number of design variants of different types of radiometer used for primary radiometry and describes their calibration. Furthermore, details and requirements regarding the experimental procedure for obtaining low uncertainty thermodynamic temperatures with these radiometers are presented, noting that such radiometers can also be used at temperatures well below the silver point. Finally, typical results obtained by these methods are reviewed.

The kelvin redefinition and its mise en pratique

In 2018, it is expected that there will be a major revision of the International System of Units (SI) which will result in all of the seven base units being defined by fixing the values of certain atomic or fundamental constants. As part of this revision, the kelvin, unit of thermodynamic temperature, will be redefined by assigning a value to the Boltzmann constant k. This explicit-constant definition will define the kelvin in terms of the SI derived unit of energy, the joule. It is sufficiently wide to encompass any form of thermometry. The planned redefinition has motivated the creation of an extended mise en pratique ('practical realization') of the definition of the kelvin (MeP-K), which describes how the new definition can be put into practice. The MeP-K incorporates both of the defined International Temperature Scales (ITS-90 and PLTS-2000) in current use and approved primary-thermometry methods for determining thermodynamic temperature values. The MeP-K is a guide that provides or makes reference to the information needed to perform measurements of temperature in accord with the SI at the highest level. In this article, the background and the content of the extended second version of the MeP-K are presented.

Estimates of the difference between thermodynamic temperature and the International Temperature Scale of 1990 in the range 118 K to 303 K

Using exceptionally accurate measurements of the speed of sound in argon, we have made estimates of the difference between thermodynamic temperature, T, and the temperature estimated using the International Temperature Scale of 1990, T90, in the range 118 K to 303 K. Thermodynamic temperature was estimated using the technique of relative primary acoustic thermometry in the NPL-Cranfield combined microwave and acoustic resonator. Our values of (T-T90) agree well with most recent estimates, but because we have taken data at closely spaced temperature intervals, the data reveal previously unseen detail. Most strikingly, we see undulations in (T-T90) below 273.16 K, and the discontinuity in the slope of (T-T90) at 273.16 K appears to have the opposite sign to that previously reported.

MRS thermometry calibration at 3 T: effects of protein, ionic concentration and magnetic field strength

MRS thermometry has been utilized to measure temperature changes in the brain, which may aid in the diagnosis of brain trauma and tumours. However, the temperature calibration of the technique has been shown to be sensitive to non-temperature-based factors, which may provide unique information on the tissue microenvironment if the mechanisms can be further understood. The focus of this study was to investigate the effects of varied protein content on the calibration of MRS thermometry at 3 T, which has not been thoroughly explored in the literature. The effects of ionic concentration and magnetic field strength were also considered. Temperature reference materials were controlled by water circulation and freezing organic fixed-point compounds (diphenyl ether and ethylene carbonate) stable to within 0.2 °C. The temperature was measured throughout the scan time with a fluoro-optic probe, with an uncertainty of 0.16 °C. The probe was calibrated at the National Physical Laboratory (NPL) with traceability to the International Temperature Scale 1990 (ITS-90). MRS thermometry measures were based on single-voxel spectroscopy chemical shift differences between water and N-acetylaspartate (NAA), Δ(H20-NAA), using a Philips Achieva 3 T scanner. Six different phantom solutions with varying protein or ionic concentration, simulating potential tissue differences, were investigated within a temperature range of 21-42 °C. Results were compared with a similar study performed at 1.5 T to observe the effect of field strengths. Temperature calibration curves were plotted to convert Δ(H20-NAA) to apparent temperature. The apparent temperature changed by -0.2 °C/% of bovine serum albumin (BSA) and a trend of 0.5 °C/50 mM ionic concentration was observed. Differences in the calibration coefficients for the 10% BSA solution were seen in this study at 3 T compared with a study at 1.5 T. MRS thermometry may be utilized to measure temperature and the tissue microenvironment, which could provide unique unexplored information for brain abnormalities and other pathologies.

High-precision calibration of MRS thermometry using validated temperature standards: effects of ionic strength and protein content on the calibration

Currently, there is very limited ability to measure the temperature of the brain, but a direct technique for its estimation in vivo could improve the detection of patients at risk of temperature-related brain damage, help in the diagnosis of stroke and tumour, and provide useful information on the mechanisms of thermoregulation of the brain. In this article, new calibrations in vitro of MRS thermometry using temperature-stabilised reference phantoms are reported. The phantoms comprise two concentric glass spheres: the inner sphere contains the phantom material to be measured by MRS, and the outer sphere contains a substance with a known temperature stable to within 0.2 °C. The substances were freezing organic fixed-point compounds (diphenyl ether and ethylene carbonate, freezing at 26.3 and 35.8 °C, respectively) or temperature-controlled circulating water. The phantom temperature was continuously monitored with a fluoroptic probe calibrated at the National Physical Laboratory with traceability to the International Temperature Scale 1990 (ITS-90). The MRS temperature calibration was obtained by measuring the chemical shift of water relative to N-acetylaspartate (NAA) in a single voxel as a function of temperature using a 1.5-T Philips Intera scanner. Measurements were made for several phantom materials to assess the effect of tissue composition on the water-NAA chemical shift against temperature calibration. The phantom mixtures contained 25 mm of NAA buffered to pH 6.5 or 7.5 and several ionic salts or bovine serum albumin (BSA). Spectra were acquired from 25 to 45 °C. The correlation between frequency differences and phantom temperature was very linear with small residuals. However, the linear fitting parameters varied with ionic composition and BSA concentration. The 'apparent' temperature (calibrated using the water-NAA frequency differences) decreased by approximately 1 °C for every 100 mm increase in ionic concentration and increased proportionally to the concentration of BSA.

Report of a consensus meeting on human brain temperature after severe traumatic brain injury: its measurement and management during pyrexia

Temperature disturbances are common in patients with severe traumatic brain injury. The possibility of an adaptive, potentially beneficial role for fever in patients with severe brain trauma has been dismissed, but without good justification. Fever might, in some patients, confer benefit. A cadre of clinicians and scientists met to debate the clinically relevant, but often controversial issue about whether raised brain temperature after human traumatic brain injury (TBI) should be regarded as "good or bad" for outcome. The objective was to produce a consensus document of views about current temperature measurement and pyrexia treatment. Lectures were delivered by invited speakers with National and International publication track records in thermoregulation, neuroscience, epidemiology, measurement standards and neurocritical care. Summaries of the lectures and workshop discussions were produced from transcriptions of the lectures and workshop discussions. At the close of meeting, there was agreement on four key issues relevant to modern temperature measurement and management and for undergirding of an evidence-based practice, culminating in a consensus statement. There is no robust scientific data to support the use of hypothermia in patients whose intracranial pressure is controllable using standard therapy. A randomized clinical trial is justified to establish if body cooling for control of pyrexia (to normothermia) vs moderate pyrexia leads to a better patient outcome for TBI patients.

New standards for devices used for the measurement of human body temperature

Significant changes in recording of human body temperature have been taking place worldwide in recent years. The clinical thermometer introduced in the mid-19th century by Wunderlich has been replaced by digital thermometers or radiometer devices for recording tympanic membrane temperature. More recently the use of infrared thermal imaging for fever screening has become more widespread following the SARS infection, and particularly during the pandemic H1N1 outbreak. Important new standards that have now reached international acceptance will affect clinical and fever screening applications. This paper draws attention to these new standard documents. They are designed to improve the standardization of both performance and practical use of these key techniques in clinical medicine, especially necessary in a pandemic influenza situation.

A systematic performance evaluation of brain and body temperature sensors using ultra-stable temperature references

The impact of a rise in the temperature of the human brain in patients who have suffered cerebral damage is not completely understood. Current studies are ambiguous; some show that a high brain temperature, and others a low brain temperature, is an indicator of poor prognosis. The reported effect is often very subtle, at the <0.5 degrees C level, and this may be due to the performance, or even the location of the temperature sensor. This study investigates the first of these issues, i.e. the performance of the sensor. Here performance validation is undertaken for three commonly used temperature sensors for brain and body temperature measurement, using ultra-stable temperature references. At body temperature all three sensor types performed within manufacturer's specifications. Given that only a small number of temperature sensors were tested, the indication is that, provided the sensors are located correctly, the small observed differences in temperature are real - though the issue of clinical significance is still to be addressed.

Reliability issues in human brain temperature measurement

Introduction

The influence of brain temperature on clinical outcome after severe brain trauma is currently poorly understood. When brain temperature is measured directly, different values between the inside and outside of the head can occur. It is not yet clear if these differences are 'real' or due to measurement error.

Methods

The aim of this study was to assess the performance and measurement uncertainty of body and brain temperature sensors currently in use in neurocritical care. Two organic fixed-point, ultra stable temperature sources were used as the temperature references. Two different types of brain sensor (brain type 1 and brain type 2) and one body type sensor were tested under rigorous laboratory conditions and at the bedside. Measurement uncertainty was calculated using internationally recognised methods.

Results

Average differences between the 26°C reference temperature source and the clinical temperature sensors were +0.11°C (brain type 1), +0.24°C (brain type 2) and -0.15°C (body type), respectively. For the 36°C temperature reference source, average differences between the reference source and clinical thermometers were -0.02°C, +0.09°C and -0.03°C for brain type 1, brain type 2 and body type sensor, respectively. Repeat calibrations the following day confirmed that these results were within the calculated uncertainties. The results of the immersion tests revealed that the reading of the body type sensor was sensitive to position, with differences in temperature of -0.5°C to -1.4°C observed on withdrawing the thermometer from the base of the isothermal environment by 4 cm and 8 cm, respectively. Taking into account all the factors tested during the calibration experiments, the measurement uncertainty of the clinical sensors against the (nominal) 26°C and 36°C temperature reference sources for the brain type 1, brain type 2 and body type sensors were ± 0.18°C, ± 0.10°C and ± 0.12°C respectively.

Conclusions

The results show that brain temperature sensors are fundamentally accurate and the measurements are precise to within 0.1 to 0.2°C. Subtle dissociation between brain and body temperature in excess of 0.1 to 0.2°C is likely to be real. Body temperature sensors need to be secured in position to ensure that measurements are reliable.

Traceability and calibration in temperature measurement: a clinical necessity

Patient temperature is a fundamental physiological measurement used primarily for observation and diagnosis, for example during surgery, intensive care, recuperation, or treatment. A variety of thermometers are used clinically and these can be separated into two categories, either contact (oral thermometers, rectal thermometers and temporal strips), or non-contact (ear thermometers, temporal thermometers and thermal imagers). To have the maximum confidence in the clinical performance of the temperature measurement instrument it is strongly desirable that the device be traceably calibrated to the International Temperature Scale of 1990 (ITS-90). Lack of traceable calibrations accredited to ISO17025 can lead to unreliability in temperature measurement and in some cases can have a deleterious effect on patient care. The National Physical Laboratory (NPL) maintains and disseminates the ITS-90 for contact and non-contact thermometry in the UK. The importance of accredited traceable calibrations and an outline of contact and non-contact thermometry standards are given here.

Fetoscopic treatment for discordant twins

BACKGROUND/PURPOSE

In rare instances in monochorionic twin pregnancies, one twin can have a discordant anomaly (eg, cystic hygroma). If this twin dies in utero, neurologic injury and death can occur in the surviving cotwin. To protect the normal twin, the authors developed an approach to separate the circulations and ablate the umbilical cord of the abnormal twin.

METHODS

From September 1998 to February 2001, 6 cases of discordant anomalous twins were diagnosed by prenatal ultrasound scan in which the anomaly was lethal or parents desired prenatal termination for this abnormal twin. All underwent surgical intervention with gestational ages varying from 19 to 24 weeks.

RESULTS

Depending on cord insertion site and placental anatomy, blood flow was interrupted to the anomalous fetus by either radiofrequency ablation (RFA; 2 cases), cord transection (1 case), or cord transection after laser ablation of communicating vessels (3 cases). Fetal death occurred in one normal twin 4 days postoperatively. Average age at delivery for the 5 surviving fetuses was 34.5 weeks' gestation. On follow-up, all surviving infants are neurologically intact.

CONCLUSION

An otherwise normal monochorionic twin threatened by an anomalous cotwin can be salvaged successfully with a strategy tailored to interrupt the vascular connections between the 2 twins.

Placentation in multiple births

Outcomes of multifetal pregnancy in prenatal life are markedly affected by chorionicity. Several disease processes are found in monochorionic (MC) twins that do not occur in dichorionic (DC) twins. Improvements in prenatal outcomes will depend on reliable first trimester diagnosis of chorionicity, allowing early monitoring for complications of MC placentation. Particular structures and functions of MC twin placentas affect outcomes and can be targeted for specific treatments, especially in twin-twin transfusion. The causes of severe DC twin fetal growth discordance are clarified. In post-natal life, zygosity is a determining effect in genetic predisposition to many chronic diseases, including neoplasia. Few MC twins know that they are monozygotic (MZ). Few twin researchers realize that MZ twins may be genetically discordant. Abandonment of the word "identical" for MZ twins would assist in clarifying these issues of zygosity, concordance and discordance.

The highly protective effect of newborn circumcision against invasive penile cancer

OBJECTIVE

We determined the relation between newborn circumcision and both invasive penile cancer (IPC) and carcinoma in situ (CIS) among adult male members of a large health maintenance organization.

SUBJECTS AND METHODS

Circumcision status was ascertained by a combination of pathology reports, medical record review, and questionnaires for 213 adult male members of a large prepaid health plan who were diagnosed with IPC or CIS.

RESULTS

Of 89 men with IPC whose circumcision status was known, 2 (2.3%) had been circumcised as newborns, and 87 were not circumcised. Of 118 men with CIS whose circumcision status was known, 16 (15.7%) had been circumcised as newborns.

CONCLUSIONS

Our results confirm the highly protective effect of newborn circumcision against IPC and the less protective effect against CIS.

A twin-pronged attack on complex traits

Before one starts the hunt for quantitative trait loci (QTLs) for a complex trait, it is necessary to show that the trait is genetically influenced. This evidence is most likely to come from the classical twin study--the demonstration that monozygotic twins are more similar for the trait than dizygotic twins. The strengths and weaknesses of twin studies are discussed, and it is suggested that, far from becoming irrelevant with advances in molecular biology, they can improve the efficiency of QTL detection and play an important role in unravelling developmental genetic mechanisms.

Zygosity testing. Current status and evolving issues

This paper reviews the current status and evolving issues in the field of zygosity testing. Monozygotic twins are seldom absolutely identical. Traditional methods of zygosity testing, mathematical ones and assessment of physical characteristics are reviewed. The proper delineation of zygosity based on placentation and chorionicity is outlined. Genetic and environmental discordance patterns are described, with a discussion of why "identical" twins are never identical preceding specific guidelines for clinical practice.

Correlations of placental vascular anatomy and clinical outcomes in 69 monochorionic twin pregnancies

Monochorionic monozygotic twins frequently suffer complications from the presence of vascular anastomoses in their monochorionic placentas. Also, sharing of perfusion zones may be unequal, leading to marked growth discordance. This paper analyzes four measures of perinatal outcome (gestational age at delivery, perinatal mortality, birth weight discordance, and presence/absence of hydramnios) according to the vascular patterns of the monochorionic placentas. The worst clinical outcomes were associated with arteriovenous anastomoses in the absence of arterio-arterial and veno-venous anastomoses. The vascular patterns of monochorionic placentas cause significant fetal environmental differences within pairs of monochorionic monozygotic twins. These differences may cause life-long discordance for several phenotypic traits that are not genetically based, and which cause monochorionic monozygotic twins to be "non-identical."

X-chromosome inactivation is mostly random in placental tissues of female monozygotic twins and triplets

Patterns of X-chromosome inactivation in chorion, amnion, and cord from 79 pairs of twins were examined. Seven sets of triplets were included in the analysis, both as twin pairs and triplets. Twins were stratified as dizygotic (DZ), monozygotic (MZ), monochorionic, and dichorionic and were selected for birth weight discordance, discordance for congenital anomalies, twin-twin transfusion syndrome, and various patterns of vascular anastomosis. X-inactivation was predominantly symmetric. Chorion was the most likely tissue to show asymmetric X-inactivation and was found most frequently in MZ dichorionic twins. There was no correlation of X-inactivation pattern with the selected clinical criteria. This study does not confirm that asymmetric X-inactivation in embryonic tissues is a common phenomenon in female twins, including monozygotic twins.

Some perinatal characteristics of monozygotic twins who are dichorionic

Zygosity testing of all multiple births allowed the identification of a subgroup of 42 monozygotic twin pairs who have dichorionic placentas, fused and separate. Perinatal outcomes of this group were compared with 110 pairs of monochorionic monozygotic twins and 148 pairs of dizygotic twins. Dichorionic monozygotic twins had the lowest incidence of preterm birth, perinatal mortality, and birth weight discordance. There was an excess of like-sexed over unlike-sexed pairs among the dizygotic twins.

Intercomparison of the ITS-90 Radiance Temperature Scales of the National Physical Laboratory (U.K.) and the National Institute of Standards and Technology

An intercomparison of radiance temperature scales has been performed by the National Physical Laboratory (NPL) and the National Institute of Standards and Technology (NIST) using a standard transfer pyrometer operating at a wavelength of approximately 1000 nm. It was found that the radiance temperature scales established by the two laboratories were in agreement to 0.1% or better of the temperature over the range 1000 °C to 2500 °C.

Prostaglandin endoperoxide-H synthase (PGHS) activity and immunoreactive PGHS-1 and PGHS-2 levels in human amnion throughout gestation, at term, and during labor

Prostaglandins (PGs) are of primary importance in the initiation and maintenance of labor in women. A major intrauterine source of prostaglandins is the amnion, which synthesizes increased amounts of PGE2 at term labor. Because PG endoperoxide-H synthase (PGHS) catalyzes the rate-limiting step of PG synthesis from arachidonic acid, we investigated the changes in amniotic PGHS specific activity during gestation and at term and preterm labor. Also, we determined the level of immunoreactive PGHS protein in the amnion to evaluate the mechanisms by which PGHS activity may be regulated. PGHS specific activity, measured at the amount of PGE2 produced by amnion microsomes under optimal conditions, was 18.2 +/- 3.7 pg PGE2/micrograms protein.min (mean +/- SE; n = 19) at term (37-42 weeks gestation) before the spontaneous onset of labor. PGHS specific activity was significantly higher after spontaneous term labor (38.9 +/- 6.0 pg PGE2/micrograms protein.min; n = 19; P < 0.05). Amnion samples from preterm (< 36 weeks gestation) nonlaboring patients contained low levels of PGHS specific activity (5.9 +/- 1.8 pg PGE2/micrograms protein.min; n = 9), which increased significantly with spontaneous preterm labor (28.3 +/- 6.8 pg PGE2/micrograms protein.min; n = 10; P < 0.05). Longitudinal analysis of the data showed that PGHS specific activity was low in the first and second trimesters of gestation, but increased dramatically before labor onset at term. We detected PGHS protein in all microsomal samples, with an antiovine PGHS antibody recognizing both PGHS-1 and -2 isoforms of the enzyme. However, there was no correlation between PGHS specific activity and the amount of immunoreactive PGHS protein. Using an antibody specific for PGHS-2, we detected immunoreactive protein in only 9 of the 25 tissues examined and found no correlation between PGHS specific activity and the amount of PGHS-2 protein. These results suggest that 1) PGHS specific activity in the amnion increases sharply before the onset of labor at term; 2) further increases in specific activity occur during term and preterm labor; and 3) the specific activity of PGHS in the amnion is not related directly to the amount of immunoreactive enzyme protein.

Evaluation of effects of PAF on alveolar fluid clearance with use of NMR imaging

Autologous serum with or without platelet-activating factor (PAF) was instilled into one lung lobe of an anesthetized cat, and changes in the regional lung water content were monitored for 4 h with proton nuclear magnetic resonance (NMR) images and relaxation time measurements. With serum as an instillate, water was cleared with a half time of approximately 670 min; after 4 h, 86 +/- 6% of that instilled remained. With PAF added to the instillate, clearance was biphasic with an initial clearance half time of approximately 30 min followed by clearance similar to that observed after serum instillation; after 4 h, 35 +/- 4% of that instilled remained. In contrast, 4 h after instillation of serum or serum plus PAF, 91 +/- 3% and 82 +/- 5%, respectively, of the instilled 125I-labeled albumin remained in the lung (P = 0.06). From transverse magnetization relaxation curves we were able to resolve two relaxation components, which we have attributed to the instilled fluid in the air spaces (relaxation time = 177 +/- 7 ms) and the tissue-bound fluid (relaxation time = 25 +/- 1 ms).

A case of aplasia cutis congenita in dizygotic twins

We report a newborn infant with extensive aplasia cutis congenita of the flanks and thighs, associated with a co-twin fetus papyraceus. DNA restriction fragment polymorphism analysis of the twins proved dizygosity. The association of these two conditions in twins is reviewed.

Poland anomaly with a limb body wall disruption defect: case report and review

We describe a female infant with apparent Poland anomaly (PA) and limb body wall defect. Analysis of the defects suggest that a disruption of the lateral embryonic plate mesoderm may have been responsible for the observed lesions. Because of the overlap of this case with PA, we re-examined previous reports of this syndrome. We think that the lesions could be equally well explained as a mesodermal disruption, and point out a previously unrecognised discrepancy between sex and affected side in sporadic PA and inherited PA which supports this view.