Modeling of Hydrogen-Charged Notched Tensile Tests of an X70 Pipeline Steel with a Hydrogen-Informed Gurson Model

Hydrogen can degrade the mechanical properties of steel components, which is commonly referred to as "hydrogen embrittlement" (HE). Quantifying the effect of HE on the structural integrity of components and structures remains challenging. The authors investigated an X70 pipeline steel through uncharged and hydrogen-charged (notched) tensile tests. This paper presents a combination of experimental results and numerical simulations using a micro-mechanics-inspired damage model. Four specimen geometries and three hydrogen concentrations (including uncharged) were targeted, which allowed for the construction of a fracture locus that depended on the stress triaxiality and hydrogen concentration. The multi-physical finite element model includes hydrogen diffusion and damage on the basis of the complete Gurson model. Hydrogen-Assisted degradation was implemented through an acceleration of the void nucleation process, as supported by experimental observations. The damage parameters were determined through inverse analysis, and the numerical results were in good agreement with the experimental data. The presented model couples micro-mechanical with macro-mechanical results and makes it possible to evaluate the damage evolution during hydrogen-charged mechanical tests. In particular, the well-known ductility loss due to hydrogen was captured well in the form of embrittlement indices for the different geometries and hydrogen concentrations. The limitations of the damage model regarding the stress state are discussed in this paper.

Combined Gold Recovery and Nanoparticle Synthesis in Microbial Systems Using Fractional Factorial Design

Green synthesis of gold nanoparticles (AuNPs) using microorganisms has been generally studied aiming for high-yield production and morphologies appropriated for various applications, such as bioremediation, (bio)sensors, and (bio)catalysis. Numerous approaches showed the individual effect of factors influencing the synthesis of AuNPs with limited analysis of the governing factors enhancing the production and desired quality of the precipitates. This study proposes a fractional-factorial design to investigate the simultaneous influence of seven environmental factors (cell concentration, temperature, anoxic/oxic conditions, pH, gold concentration, electron donor type, and bacterial species) on the recovery yield and synthesis of targeted AuNPs. Various sizes and morphologies of the AuNPs were obtained by varying the environmental factors studied. The factors with significant effects (i.e., 0.2 mM Au and pH 5) were selected according to statistical analysis for optimal removal of 88.2 ± 3.5% of gold and with the production of valuable 50 nm AuNPs, which are known for their enhanced sensitivity. Implications of the cytochrome-C on the bacterial mechanisms and the provision of electron donors via an electrochemical system are further discussed. This study helps develop gold recovery and nanoparticle synthesis methods, focusing on the determining factor(s) for efficient, low-cost, green synthesis of valuable materials.

Effect of Intercritical Temperature on the Microstructure and Mechanical Properties of a Ferritic-Martensitic Dual-Phase Low-Alloy Steel with Varying Nickel Content

Dual-phase low-alloy steels combine a soft ferrite phase with a hard martensite phase to create desirable properties in terms of strength and ductility. Nickel additions to dual-phase low-alloy steels can increase the yield strength further and lower the transformation temperatures, allowing for microstructure refining. Determining the correct intercritical annealing temperature as a function of nickel content is paramount, as it defines the microstructure ratio between ferrite and martensite. Likewise, quantifying the influence of nickel on the intercritical temperature and its synergistic effect with the microstructure ratio on mechanical properties is vital to designing dual-phase steels suitable for corrosive oil and gas services as well as hydrogen transport and storage applications. In this work, we used a microstructural design to develop intercritical annealing heat treatments to obtain dual-phase ferritic-martensitic low-alloy steels. The intercritical annealing and tempering temperatures and times were targeted to achieve three different martensite volume fractions as a function of nickel content, with a nominal content varying between 0, 1, and 3-wt% Ni. Mechanical properties were characterized using tensile testing and microhardness measurements. Additionally, the microstructure was studied using scanning electron microscopy coupled with electron backscatter diffraction analysis. Tensile strength increased with increasing martensite ratio and nickel content, with a further grain refinement effect found in the 3-wt% Ni steel. The optimal heat treatment parameters for oil and gas and hydrogen transport applications are discussed.

The influence of H 2 partial pressure on biogenic palladium nanoparticle production assessed by single‐cell ICP ‐mass spectrometry

The production of biogenic palladium nanoparticles (bio-Pd NPs) is widely studied due to their high catalytic activity, which depends on the size of nanoparticles (NPs). Smaller NPs (here defined as <100 nm) are more efficient due to their higher surface/volume ratio. In this work, inductively coupled plasma-mass spectrometry (ICP-MS), flow cytometry (FCM) and transmission electron microscopy (TEM) were combined to obtain insight into the formation of these bio-Pd NPs. The precipitation of bio-Pd NPs was evaluated on a cell-per-cell basis using single-cell ICP-MS (SC-ICP-MS) combined with TEM images to assess how homogenously the particles were distributed over the cells. The results provided by SC-ICP-MS were consistent with those provided by "bulk" ICP-MS analysis and FCM. It was observed that heterogeneity in the distribution of palladium over an entire cell population is strongly dependent on the Pd²⁺ concentration, biomass and partial H₂ pressure. The latter three parameters affected the particle size, ranging from 15.6 to 560 nm, and exerted a significant impact on the production of the bio-Pd NPs. The TEM combined with SC-ICP-MS revealed that the mass distribution for bacteria with high Pd content (144 fg Pd cell^-1 ) indicated the presence of a large number of very small NPs (D50 = 15.6 nm). These results were obtained at high cell density (1 × 10⁵  ± 3 × 10⁴ cells μl^-1 ) and H₂ partial pressure (180 ml H₂ ). In contrast, very large particles (D50 = 560 nm) were observed at low cell density (3 × 10⁴  ± 10 × 10² cells μl^-1 ) and H₂ partial pressure (10-100 ml H₂ ). The influence of the H₂ partial pressure on the nanoparticle size and the possibility of size-tuned nanoparticles are presented.

Effect of speciation and composition on the kinetics and precipitation of arsenic sulfide from industrial metallurgical wastewater

Precipitation of arsenic as As₂S₃ produces little waste sludge, has the potential for low chemical consumption and for selective metal(loid) removal. In this study, arsenic removal from acidic (pH 2), metallurgical wastewater was tested in industrially relevant conditions. Sulfides added at a S:As molar ratio of 2.5 and 5 resulted in removal of 99% and 84% of As(III) and As(V). Precipitation of As₂S₃ from the As(III) and industrial wastewater containing 17% As(V) was nearly instantaneous. For the synthetic As(V) solution, reduction to As(III) was the rate limiting step. At a S:As ratio of 20 and an observed removal rate (k₂ = 4.8 (mol L^-1) h^-1), two hours were required to remove of 93% of arsenic from a 1 g As L^-1 solution. In the case of As(V) in industrial samples this time lag was not observed, showing that components in the industrial wastewater affected the removal and reduction of arsenate. Speciation also affected flocculation and coagulation characteristics of As₂S₃ particles: As(V) reduction resulted in poor coagulation and flocculation. Selective precipitation of arsenic was possible, but depended on speciation, S:As ratio and other metals present.

The effect of Nb on the high strain rate hydrogen embrittlement of Q&P steel

Quenching and Partitioning (Q&P) steels are, due to their excellent combination of strength and ductility, seen as good candidates for the third generation advanced high strength steels (AHSS). Although the TRIP effect is beneficial for the overall mechanical behaviour of these steels it potentially can have detrimental effects when strained in a hydrogenenriched environment. The solubility of hydrogen is high in austenite but low in high carbon martensite. Martensite is even in the absence of hydrogen already a possible damage initiation spot. The effect of hydrogen under static and dynamic tensile loading was evaluated in a Q&P and a Nb micro-alloyed Q&P steel. Experiments were carried out under a strain rate ranging from 0.03 s-1 till 500 s-1 and correlated with the hydrogen uptake characterised via thermal desorption spectroscopy (TDS). The presence of Nb resulted in a 25% increase in the hydrogen uptake capacity. A higher susceptibility to hydrogen was observed in the Nb steel partially due to the high hydrogen fraction, but also because of the larger fraction of low stability austenite. However, when tested under dynamic conditions the hydrogen susceptibility is minor and even improved in the micro-alloyed Q&P steel compared to the standard Q&P steel.

Fabrication of Microporous Coatings on Titanium Implants with Improved Mechanical, Antibacterial, and Cell-Interactive Properties

The success of an orthopedic implant therapy depends on successful bone integration and the prevention of microbial infections. In this work, plasma electrolytic oxidation (PEO) was performed to deposit TiO₂ coatings enriched with Ca, P, and Ag on titanium to improve its surface properties and antibacterial efficacy while maintaining normal biological functions and thus to enhance the performance of orthopedic implants. After PEO treatment, the surface of Ti was converted to anatase and rutile TiO₂, hydroxyapatite, and calcium titanate phases. The presence of these crystalline phases was further increased with an increased Ag content in the coatings. The developed coatings also exhibited a more porous morphology with an improved surface wettability, roughness, microhardness, and frictional coefficient. In vitro antibacterial assays indicated that the Ag-doped coatings can significantly prevent the growth of both Staphylococcus aureus and Escherichia coli by releasing Ag⁺ ions, and the ability to prevent these bacteria was enhanced by increasing the Ag content in the coatings, resulting in a maximal 6-log reduction of E. coli and a maximal 5-log reduction of S. aureus after 24 h of incubation. Moreover, the in vitro cytocompatibility evaluation of the coatings showed that the osteoblast (MC3T3) cell integration on the PEO-based coatings was greatly improved compared to untreated Ti and no notable impact on their cytocompatibility was observed on increasing the amount of Ag in the coating. In conclusion, the coating with favorable physicochemical and mechanical properties along with controlled silver ion release can offer an excellent antibacterial performance and osteocompatibility and can thus become a prospective coating strategy to face current challenges in orthopedics.

Investigation of Ag/a-C:H Nanocomposite Coatings on Titanium for Orthopedic Applications

One of the leading causes of failure for any bone implant is implant-associated infections. The implant-bone interface is in fact the crucial site of infection where both the microorganisms and cells compete to populate the newly introduced implant surface. Most of the work dealing with this issue has focused on the design of implant coatings capable of preventing infection while ignoring cell proliferation or vice versa. The present study is therefore focused on investigating the antibacterial and biological properties of nanocomposite coatings based on an amorphous hydrocarbon (a-C:H) matrix containing silver nanoparticles (AgNPs). a-C:H coatings with varying silver concentrations were generated directly on medical grade titanium substrates using a combination of a gas aggregation source (GAS) and a plasma-enhanced chemical vapor deposition (PE-CVD) process. The obtained results revealed that the surface silver content increased from 1.3 at % to 5.3 at % by increasing the used DC magnetron current in the GAS from 200 to 500 mA. The in vitro antibacterial assays revealed that the nanocomposites with the highest number of silver content exhibited excellent antibacterial activities resulting in a 6-log reduction of Escherichia coli and a 4-log reduction of Staphylococcus aureus after 24 h of incubation. An MTT assay, fluorescence live/dead staining, and SEM microscopy observations of MC3T3 cells seeded on the uncoated and coated Ti substrates also showed that increasing the amount of AgNPs in the nanocomposites had no notable impact on their cytocompatibility, while improved cell proliferation was especially observed for the nanocomposites possessing a low amount of AgNPs. These controllable Ag/a-C:H nanocomposites on Ti substrates, which simultaneously provide an excellent antibacterial performance and good biocompatibility, could thus have promising applications in orthopedics and other biomedical implants.

Evaluation of a Ti-Base Alloy as Steam Cracking Reactor Material

Low-coking reactor material technologies are key for improving the performance and sustainability of steam crackers. In an attempt to appraise the coking performance of an alternative Ti-base alloy during ethane steam cracking, an experimental study was performed in a jet stirred reactor under industrially relevant conditions using thermogravimetry (T_gasphase = 1173 K, P_tot = 0.1 MPa, X_C2H6 = 70%, and dilution δ = 0.33 kg_H2O/kg_HC). Initially, a typical pretreatment used for Fe-Ni-Cr alloys was utilized and compared with a pretreatment at increased temperature, aiming at better surface oxidation and thus suppressing coke formation. The results revealed a decrease in coking rates upon high temperature pretreatment of the Ti-base alloy, however, its coking performance was significantly worse compared to the typically used Fe-Ni-Cr alloys, and carbon oxides formation increased by a factor of 30 or more. Moreover, the analyzed coupons showed crack propagation after coking/decoking and cooling down to ambient temperature. Scanning electron microscopy combined with energy-dispersive X-ray spectroscopy indicated that the prompt and unsystematic oxidation of the surface and bulk caused observable crack initiation and propagation due to alloy brittleness. Hence, the tested Ti-base alloy cannot be considered an industrially noteworthy steam cracking reactor alloy.

Effect of Long-Term High Temperature Oxidation on the Coking Behavior of Ni-Cr Superalloys

The service time of an industrial cracker is strongly dependent on the long-term coking behavior and microstructure stability of the reactor coil alloy. Super alloys are known to withstand temperatures up to even 1400 K. In this work, several commercially available alloys have been first exposed to a long term oxidation at 1423 K for 500 h, so-called metallurgic aging. Subsequently, their coking behavior was evaluated in situ in a thermogravimetric setup under ethane steam cracking conditions (T_gasphase = 1173 K, P_tot = 0.1 MPa, X_C2H6 = 70%, continuous addition of 41 ppmw S/HC of DMDS, dilution δ = 0.33 kg_H2O/kg_HC) and compared with their unaged coking behavior. The tested samples were also examined using scanning electron microscopy and energy diffractive X-ray for surface and cross-section analysis. The alloys characterized by increased Cr-Ni content or the addition of Al showed improved stability against bulk oxidation and anti-coking behavior after application of metallurgic aging due to the formation of more stable oxides on the top surface.

Metal losses in pyrometallurgical operations - A review

Nowadays, a higher demand on a lot of metals exists, but the quantity and purity of the ores decreases. The amount of scrap, on the other hand, increases and thus, recycling becomes more important. Besides recycling, it is also necessary to improve and optimize existing processes in extractive and recycling metallurgy. One of the main difficulties of the overall-plant recovery are metal losses in slags, in both primary and secondary metal production. In general, an increased understanding of the fundamental mechanisms governing these losses could help further improve production efficiencies. This review aims to summarize and evaluate the current scientific knowledge concerning metal losses and pinpoints the knowledge gaps. First, the industrial importance and impact of metal losses in slags will be illustrated by several examples from both ferrous and non-ferrous industries. Throughout the remainder of this review, the main focus will be put on the particular issues in copper industry. In a second section, the different types of metal losses in slags will be discussed. Generally, metal losses in slags can be subdivided into two types: chemical losses and physical losses. The fundamental insights concerning the responsible mechanisms will be discussed for each type. Subsequently, an overview of the most frequently used techniques for research investigations of the losses will be given. In a fourth section, a more detailed overview will be given on the post-processing treatment of metal-containing slags, i.e. performing slag cleaning operations. The most frequently applied methods will be discussed.

Effect of strain rate on the hydrogen embrittlement of a DP steel

Advanced high strength steels (HSSs), such as dual phase steels, are widely used in the automotive industry due to their excellent combination of strength and ductility. In certain applications, they might be exposed to hydrogen (H) which is known to be detrimental for the deformation. H embrittlement (HE) is still not fully understood. It might drastically reduce the energy absorbed in a crash event and limits the use of HSSs in car bodies. Although H diffusion is a highly time dependent phenomenon, so far, the combined effect of dynamic strain rates and electrochemical H pre-charging has not been studied. Therefore, a reproducible methodology has been developed. Tensile specimens were electrochemically H pre-charged and immediately tested in a split Hopkinson tensile bar setup. To distinguish between the effect of strain rate and HE, static tests have been conducted using the same procedure. Results show that the HE resistance decreased due to higher H amounts in the sample for all strain rates. The HE increased when slower strain rates were applied due to higher probability of H to diffuse to regions of stress concentration ahead of a crack tip and as such accelerating failure. At the highest strain rate considered (900 s-1), the material still lost about 10% of its ductility.

Adsorption of As(III) versus As(V) from aqueous solutions by cerium-loaded volcanic rocks

Contamination of drinking water with arsenic causes severe health problems in various world regions. Arsenic exists predominantly as As(III) and As(V) depending on the prevailing redox conditions of the environment. Most of the techniques developed for treating As(V) are not very effective for As(III), which is more toxic and mobile than As(V). In this study, novel cerium-loaded pumice (Ce-Pu) and red scoria (Ce-Rs) adsorbents were developed to remove both As(III) and As(V) ions from water. The Ce-Pu and Ce-Rs adsorbents were characterized using ICP-OES, EDX, and SEM. The experimental equilibrium sorption data fitted well Freundlich and Dubinin-Radushkevich (D-R) isotherms. The adsorption was very fast and reached an equilibrium within 2 h. Both Ce-Rs and Ce-Pu showed high As(III) and As(V) removal efficiency in a wide pH range between 3 and 9, which is an important asset for practical applications. The Ce-Pu and Ce-Rs adsorbents can be recycled and used up to three adsorption cycles without significant loss of their original efficiency. Accordingly, Ce-Pu and Ce-Rs seem to be suitable for removal of arsenic from aqueous systems.

Removal of Arsenic (V) from Aqueous Solutions Using Chitosan-Red Scoria and Chitosan-Pumice Blends

In different regions across the globe, elevated arsenic contents in the groundwater constitute a major health problem. In this work, a biopolymer chitosan has been blended with volcanic rocks (red scoria and pumice) for arsenic (V) removal. The effect of three blending ratios of chitosan and volcanic rocks (1:2, 1:5 and 1:10) on arsenic removal has been studied. The optimal blending ratio was 1:5 (chitosan: volcanic rocks) with maximum adsorption capacity of 0.72 mg/g and 0.71 mg/g for chitosan: red scoria (Ch–Rs) and chitosan: pumice (Ch–Pu), respectively. The experimental adsorption data fitted well a Langmuir isotherm (R² > 0.99) and followed pseudo-second-order kinetics. The high stability of the materials and their high arsenic (V) removal efficiency (~93%) in a wide pH range (4 to 10) are useful for real field applications. Moreover, the blends could be regenerated using 0.05 M NaOH and used for several cycles without losing their original arsenic removal efficiency. The results of the study demonstrate that chitosan-volcanic rock blends should be further explored as a potential sustainable solution for removal of arsenic (V) from water.

Use of filtration techniques to study environmental fate of engineered metallic nanoparticles: Factors affecting filter performance

We examined the filtration of aqueous suspensions of negatively charged (citrate-stabilized) Ag (14.5±1.1nm) and positively charged CeO₂ (7.3±1.4nm) engineered nanoparticles (ENPs) via different filtration techniques such as paper filtration, micro- and ultrafiltration, and evaluated the impact of initial concentration, matrix composition, and filter type and (pre-)treatment, on nanoparticle retention. Solutions of Ag⁺ and Ce³⁺ ions were tested in the same way. Significant retention of nanoparticles was observed even for filters having considerably larger pore sizes than the ENPs size. Retention also seemingly increased with decreasing initial concentration, but generally decreased upon preconditioning of the paper or membrane filters with diluted nitric acid or 0.1M Cu(NO₃)₂, respectively. In ultrapure water, retention appeared to depend more on particle characteristics than on a membrane type. However, in 2mM KNO₃, NaCl, or CaCl₂, more significant differences in recovery were observed between different membrane materials. Additionally, background electrolytes might reduce nanoparticle or ionic retention, but could also affect their (colloidal) stability, e.g., resulting in enhanced retention of Ag ENPs and Ag⁺ ions in chloride-containing matrices. Results from centrifugal ultrafiltration recommend using 10kDa filters for nanoparticle removal from the solution, and suggest these filters might potentially be suitable to differentiate between (nano)particulate and dissolved species.

Platinum recovery from industrial process streams by halophilic bacteria: Influence of salt species and platinum speciation

The increased use and criticality of platinum asks for the development of effective low-cost strategies for metal recovery from process and waste streams. Although biotechnological processes can be applied for the valorization of diluted aqueous industrial streams, investigations considering real stream conditions (e.g., high salt levels, acidic pH, metal speciation) are lacking. This study investigated the recovery of platinum by a halophilic microbial community in the presence of increased salt concentrations (10-80 g L^-1), different salt matrices (phosphate salts, sea salts and NH₄Cl) and a refinery process stream. The halophiles were able to recover 79-99% of the Pt at 10-80 g L^-1 salts and at pH 2.3. Transmission electron microscopy suggested a positive correlation between intracellular Pt cluster size and elevated salt concentrations. Furthermore, the halophiles recovered 46-95% of the Pt-amine complex Pt[NH₃]₄²⁺ from a process stream after the addition of an alternative Pt source (K₂PtCl₄, 0.1-1.0 g L^-1 Pt). Repeated Pt-tetraamine recovery (from an industrial process stream) was obtained after concomitant addition of fresh biomass and harvesting of Pt saturated biomass. This study demonstrates how aqueous Pt streams can be transformed into Pt rich biomass, which would be an interesting feed of a precious metals refinery.

Biomass retention on electrodes rather than electrical current enhances stability in anaerobic digestion

Anaerobic digestion (AD) is a well-established technology for energy recovery from organic waste streams. Several studies noted that inserting a bioelectrochemical system (BES) inside an anaerobic digester can increase biogas output, however the mechanism behind this was not explored and primary controls were not executed. Here, we evaluated whether a BES could stabilize AD of molasses. Lab-scale digesters were operated in the presence or absence of electrodes, in open (no applied potential) and closed circuit conditions. In the control reactors without electrodes methane production decreased to 50% of the initial rate, while it remained stable in the reactors with electrodes, indicating a stabilizing effect. After 91 days of operation, the now colonized electrodes were introduced in the failing AD reactors to evaluate their remediating capacity. This resulted in an immediate increase in CH4 production and VFA removal. Although a current was generated in the BES operated in closed circuit, no direct effect of applied potential nor current was observed. A high abundance of Methanosaeta was detected on the electrodes, however irrespective of the applied cell potential. This study demonstrated that, in addition to other studies reporting only an increase in methane production, a BES can also remediate AD systems that exhibited process failure. However, the lack of difference between current driven and open circuit systems indicates that the key impact is through biomass retention, rather than electrochemical interaction with the electrodes.

Trace organic solutes in closed-loop forward osmosis applications: influence of membrane fouling and modeling of solute build-up

In this study, trace organics transport in closed-loop forward osmosis (FO) systems was assessed. The FO systems considered, consisted of an FO unit and a nanofiltration (NF) or reverse osmosis (RO) unit, with the draw solution circulating between both units. The rejection of trace organics by FO, NF and RO was tested. It was found that the rejection rates of FO were generally comparable with NF and lower than RO rejection rates. To assess the influence of fouling in FO on trace organics rejection, FO membranes were fouled with sodium alginate, bovine serum albumin or by biofilm growth, after which trace organics rejection was tested. A negative influence of fouling on FO rejection was found which was limited in most cases, while it was significant for some compounds such as paracetamol and naproxen, indicating specific compound-foulant interactions. The transport mechanism of trace organics in FO was tested, in order to differentiate between diffusive and convective transport. The concentration of trace organics in the final product water and the build-up of trace organics in the draw solution were modeled assuming the draw solution was reconcentrated by NF/RO and taking into account different transport mechanisms for the FO membrane and different rejection rates by NF/RO. Modeling results showed that if the FO rejection rate is lower than the RO rejection rate (as is the case for most compounds tested), the added value of the FO-RO cycle compared to RO only at steady-state was small for diffusively and negative for convectively transported trace organics. Modeling also showed that trace organics accumulate in the draw solution.

Influence of pore structure on the effectiveness of a biogenic carbonate surface treatment for limestone conservation

A ureolytic biodeposition treatment was applied to five types of limestone in order to investigate the effect of pore structure on the protective performance of a biogenic carbonate surface treatment. Protective performance was assessed by means of transport and degradation processes, and the penetration depth of the treatment was visualized by microtomography. Pore size governs bacterial adsorption and hence the location and amount of carbonate precipitated. This study indicated that in macroporous stone, biogenic carbonate formation occurred to a larger extent and at greater depths than in microporous stone. As a consequence, the biodeposition treatment exhibited the greatest protective performance on macroporous stone. While precipitation was limited to the outer surface of microporous stone, biogenic carbonate formation occurred at depths of greater than 2 mm for Savonnières and Euville. For Savonnières, the presence of biogenic carbonate resulted in a 20-fold decreased rate of water absorption, which resulted in increased resistance to sodium sulfate attack and to freezing and thawing. While untreated samples were completely degraded after 15 cycles of salt attack, no damage was observed in biodeposition-treated Savonnières. From this study, it is clear that biodeposition is very effective and more feasible for macroporous stones than for microporous stones.

Biogenic palladium enhances diatrizoate removal from hospital wastewater in a microbial electrolysis cell

To decrease the load of pharmaceuticals to the environment, decentralized wastewater treatment has been proposed for important point-sources such as hospitals. In this study, a microbial electrolysis cell (MEC) was used for the dehalogenation of the iodinated X-ray contrast medium diatrizoate. The presence of biogenic palladium nanoparticles (bio-Pd) in the cathode significantly enhanced diatrizoate removal by direct electrochemical reduction and by reductive catalysis using the H(2) gas produced at the cathode of the MEC. Complete deiodination of 3.3 μM (2 mg L(-1)) diatrizoate from a synthetic medium was achieved after 24 h of recirculation at an applied voltage of -0.4 V. An equimolar amount of the deiodinated metabolite 3,5-diacetamidobenzoate (DAB) was detected. Higher cell voltages increased the dehalogenation rates, resulting in a complete removal after 2 h at -0.8 V. At this cell voltage, the MEC was also able to remove 85% of diatrizoate from hospital effluent containing 0.5 μM (292 μg L(-1)), after 24 h of recirculation. Complete removal was obtained when the effluent was continuously fed at a volumetric loading rate of 204 mg diatrizoate m(-3) total cathodic compartment (TCC) day(-1) to the MEC with a hydraulic retention time of 8 h. At -0.8 V, the MEC system could also eliminate 54% of diatrizoate from spiked urine during a 24 h recirculation experiment. The final product DAB was demonstrated to be removable by nitrifying biomass, which suggests that the combination of a MEC and bio-Pd in its cathode offers potential to dehalogenate pharmaceuticals, and to significantly lower the environmental burden of hospital waste streams.

Virus disinfection in water by biogenic silver immobilized in polyvinylidene fluoride membranes

The development of innovative water disinfection strategies is of utmost importance to prevent outbreaks of waterborne diseases related to poor treatment of (drinking) water. Recently, the association of silver nanoparticles with the bacterial cell surface of Lactobacillus fermentum (referred to as biogenic silver or bio-Ag(0)) has been reported to exhibit antiviral properties. The microscale bacterial carrier matrix serves as a scaffold for Ag(0) particles, preventing aggregation during encapsulation. In this study, bio-Ag(0) was immobilized in different microporous PVDF membranes using two different pre-treatments of bio-Ag(0) and the immersion-precipitation method. Inactivation of UZ1 bacteriophages using these membranes was successfully demonstrated and was most probably related to the slow release of Ag(+) from the membranes. At least a 3.4 log decrease of viruses was achieved by application of a membrane containing 2500 mg bio-Ag(0)(powder) m(-2) in a submerged plate membrane reactor operated at a flux of 3.1 L m(-2) h(-1). Upon startup, the silver concentration in the effluent initially increased to 271 μg L(-1) but after filtration of 31 L m(-2), the concentration approached the drinking water limit ( = 100 μg L(-1)). A virus decline of more than 3 log was achieved at a membrane flux of 75 L m(-2) h(-1), showing the potential of this membrane technology for water disinfection on small scale.

Virus removal by biogenic cerium

The rare earth element cerium has been known to exert antifungal and antibacterial properties in the oxidation states +III and +IV. This study reports on an innovative strategy for virus removal in drinking water by the combination of Ce(III) on a bacterial carrier matrix. The biogenic cerium (bio-Ce) was produced by addition of aqueous Ce(III) to actively growing cultures of either freshwater manganese-oxidizing bacteria (MOB) Leptothrix discophora or Pseudomonas putida MnB29. X-ray absorption spectroscopy results indicated that Ce remained in its trivalent state on the bacterial surface. The spectra were consistent with Ce(III) ions associated with the phosphoryl groups of the bacterial cell wall. In disinfection assays using a bacteriophage as model, it was demonstrated that bio-Ce exhibited antiviral properties. A 4.4 log decrease of the phage was observed after 2 h of contact with 50 mg L(-1) bio-Ce. Given the fact that virus removal with 50 mg L(-1) Ce(III) as CeNO(3) was lower, the presence of the bacterial carrier matrix in bio-Ce significantly enhanced virus removal.

Diclofenac oxidation by biogenic manganese oxides

Diclofenac, a nonsteroidal anti-inflammatory drug, is one of the most commonly detected pharmaceuticals in sewage treatment plant (STP) effluents. In this work, biologically produced manganese oxides (BioMnOx) were investigated to remove diclofenac. At neutral pH, the diclofenac oxidation with BioMnOx was 10-fold faster than with chemically produced MnO(2). The main advantage of BioMnOx over chemical MnO(2) is the ability of the bacteria to reoxidize the formed Mn(2+), which inhibits the oxidation of diclofenac. Diclofenac-2,5-iminoquinone was identified as a major transformation product, accounting for 5-10% of the transformed diclofenac. Except for 5-hydroxydiclofenac, which was identified as an intermediate, no other oxidation products were detected. Diclofenac oxidation was proportional to the amount of BioMnOx dosed, and the pseudo first order rate constant k was 6-fold higher when pH was decreased from 6.8 to 6.2. The Mn(2+) levels remained below the drinking water limit (0.05 mg L(-1)), thus indicating the efficient in situ microbiological regeneration of the oxidant. These results combined with previous studies suggest the potential of BioMnOx for STP effluent polishing.

Removal of diatrizoate with catalytically active membranes incorporating microbially produced palladium nanoparticles

There is an increasing concern about the fate of iodinated contrast media (ICM) in the environment. Limited removal efficiencies of currently applied techniques such as advanced oxidation processes require more performant strategies. The aim of this study was to establish an innovative degradation process for diatrizoate, a highly recalcitrant ICM, by using biogenic Pd nanoparticles as free suspension or immobilized in polyvinylidene fluoride (PVDF) and polysulfone (PSf) membranes. As measured by HPLC-UV, the removal of 20mg L(-1) diatrizoate by a 10mg L(-1) Pd suspension was completed after 4h at a pH of 10. LC-MS analysis provided evidence for the sequential hydrodeiodination of diatrizoate. Pd did not lose its activity after incorporation in the PVDF and PSf matrix and the highest activity (k(cat)=30.0+/-0.4h(-1) L g(-1) Pd) was obtained with a casting solution of 10% PSf and 500mg L(-1) Pd. Subsequently, water containing 20mg L(-1) diatrizoate was treated in a membrane contactor, in which the water was supplied at one side of the membrane while hydrogen was provided at the other side. In a fed batch configuration, a removal efficiency of 77% after a time period of 48h was obtained. This work showed that membrane contactors with encapsulated biogenic nanoparticles can be instrumental for treatment of water contaminated with diatrizoate.

High shear enrichment improves the performance of the anodophilic microbial consortium in a microbial fuel cell

In many microbial bioreactors, high shear rates result in strong attachment of microbes and dense biofilms. In this study, high shear rates were applied to enrich an anodophilic microbial consortium in a microbial fuel cell (MFC). Enrichment at a shear rate of about 120 s(-1) resulted in the production of a current and power output two to three times higher than those in the case of low shear rates (around 0.3 s(-1)). Biomass and biofilm analyses showed that the anodic biofilm from the MFC enriched under high shear rate conditions, in comparison with that under low shear rate conditions, had a doubled average thickness and the biomass density increased with a factor 5. The microbial community of the former, as analysed by DGGE, was significantly different from that of the latter. The results showed that enrichment by applying high shear rates in an MFC can result in a specific electrochemically active biofilm that is thicker and denser and attaches better, and hence has a better performance.

Open air biocathode enables effective electricity generation with microbial fuel cells

The reduction of oxygen at the cathode is one of the major bottlenecks of microbial fuel cells (MFCs). While research so far has mainly focused on chemical catalysis of this oxygen reduction, here we present a continuously wetted cathode with microorganisms that act as biocatalysts for oxygen reduction. We combined the anode of an acetate oxidizing tubular microbial fuel cell with an open air biocathode for electricity production. The maximum power production was 83 +/- 11 W m(-3) MFC (0.183 L MFC) for batch-fed systems (20-40% Coulombic yield) and 65 +/- 5 W m(-3) MFC for a continuous system with an acetate loading rate of 1.5 kg COD m(-3) day(-1) (90 +/- 3% Coulombic yield). Electrochemical precipitation of manganese oxides on the cathodic graphite felt decreased the start-up period with approximately 30% versus a non-treated graphite felt. After the start-up period, the cell performance was similar for the pretreated and non-treated cathodic electrodes. Several reactor designs were tested, and it was found that enlargement of the 0.183 L MFC reactor by a factor 2.9-3.8 reduced the volumetric power output by 60-67%. Biocathodes alleviate the need to use noble or non-noble catalysts for the reduction of oxygen, which increases substantially the viability and sustainability of MFCs.