Nanoceria Anti-inflammatory and Antimicrobial Nanodrug: Cellular and Molecular Mechanism of Action

INTRODUCTION

Nanoceria is a well-known nanomaterial with various properties, including antioxidant, proangiogenic, and therapeutic effects. Despite its potential, there are still aspects that require further exploration, particularly its anti-inflammatory and antimicrobial activities.

METHOD

The global demand for novel anti-inflammatory and antimicrobial drugs underscores the significance of understanding nanoceria in both contexts. In this study, we evaluated the effect of nanoceria on macrophage polarization to better understand its anti-inflammatory effects. Additionally, we investigated the mechanism of action of nanoceria against Cryptococcus neoformans (ATCC 32045), Candida parapsilosis (ATCC 22019), Candida krusei (ATCC 6258), and Candida albicans.

RESULT

The results demonstrated that nanoceria can polarize macrophages toward an anti-inflammatory profile, revealing the cellular mechanisms involved in the anti-inflammatory response. Concerning the antimicrobial effect, it was observed that nanoceria have a more pronounced impact on Candida parapsilosis, leading to the formation of pronounced pores on the surface of this species.

CONCLUSION

Finally, biochemical analysis revealed transitory alterations, mainly in liver enzymes. The data support the use of nanoceria as a potential anti-inflammatory and antimicrobial drug and elucidate some of the mechanisms involved, shedding light on the properties of this nanodrug.

Methyl gallate nanomicelles impairs neutrophil accumulated in zymosan-induced arthritis

Arthritis is a chronic disease that affects, approximately, 1 % of the total global population. It is characterized by chronic inflammation, accompanied in most of the cases of motor disability and sever pain. The main therapies available have high risk of failure and advanced treatments are scarce and highly cost. In this scenario, search for effective, safe and low-cost treatments is quite desirable. Methyl gallate (MG) is a plant-derived phenolic compound described to present remarkable anti-inflammatory effect in experimental models of arthritis. Thus, in this study we formulated nanomicelles of MG using Pluronic (F-127) as matrix and evaluated in vivo the pharmacokinetic, biodistribution and its effect in the mice model of zymosan-induced arthritis. The nanomicelles were formed with a size 126 nm. The biodistribution showed a ubiquitous tissue deposition with a renal excretion. The pharmacokinetics showed elimination half-life of 1.72 h and a clearance of 0.006 L/h. The oral pretreatment with nanomicelles containing MG (3.5 or 7 mg/kg) demonstrated a reduction in total leukocytes, neutrophils, and mononuclear cells from the inflammation site. The data supports the use of methyl gallate nanomicelles as an alternative drug for arthritis. DATA AVAILABILITY: All the data of this study are transparent.

Physical, morphological and bioactive properties of Co-Cr-W-Ta alloys: Influence of insertion of tantalum and surface thermochemical treatment on bioactivity

The development of bioactivity in bioinert metallic alloys is a field of interest aiming to improve some aspects of these materials for implant applications. New Co₆₃ Cr₂₈ W_9-x Ta_x alloys with different Ta concentrations (x = 0, 2, 4, 6, and 9% w/w) were synthesized in the work reported here. The alloys were characterized by x-ray diffraction, volumetric density, Vickers microhardness, atomic force microscopy, scanning electron microscopy (SEM), and energy-dispersion x-ray spectroscopy (EDS). Bioactivity properties were evaluated by in vitro tests with simulated body fluid (SBF). In vivo assays were performed to assess biocompatibility. The influence of surface thermochemical treatment and Ta insertion on the bioactive properties of the alloys was investigated. The results showed that the alloy structure comprises εCo and αCo phases, with cobalt as a matrix with Cr, W, and Ta as a solid solution. TaCo₂ phase is observed in the alloys with 4, 6, and 9% w/w of Ta, and its amount increase as Ta concentration increases. Volumetric density is reduced (from 8.78 ± 0.06 to 8.56 ± 0.09 g/cm³ ) as Ta concentration increases (from 0% to 9% w/w) mainly due to the lower density of the tantalum compared to the tungsten metal. On the other hand, the TaCo₂ phase contributes to the increase of Vickers's hardness by ~17.6% for the alloy with 9% Ta (394.7 ± 8.1 HV) compared with Co₆₃ Cr₂₈ W₉ (336 ± 5 HV). The topographic analysis showed increased roughness and adhesion due to the nucleation of Ta_1.1 O_1.05 and Ca₂ Ta₂ O₇ crystals after surface thermochemical treatment. The roughness and adhesion increase from 16.9 ± 0.6 nm and 8.3 ± 1.8 nN (untreated surface) to 255.7 ± 17.7 nm and 24.1 ± 12.6 nN (treated surface), respectively, for the Co₆₃ Cr₂₈ Ta₉ alloy. These results suggest that thermochemical treatment provides surface conditions favorable to hydroxyapatite (HA) nucleation. The SEM and EDS data showed the nucleation of spongy structures, consistent with HA, composed mainly of Ca and P, indicating that oxides tantalum promoted a bioactive response on the sample's surface. The biological assay corroborated the alloy's safety and applicability, highlighting its potential in biomedical application since no harmful effects were observed.

Moisture content monitoring in industrial-scale composting systems using low-cost sensor-based machine learning techniques

Moisture is a key aspect for proper composting, allowing greater efficiency and lower environmental impact. Low-cost real-time moisture determination methods are still a challenge in industrial composting processes. The aim of this study was to design a model of hardware and software that would allow self-adjustment of a low-cost capacitive moisture sensor. Samples of organic composts with distinct waste composition and from different composting stages were used. Machine learning techniques were applied for self-adjustment of the sensor. To validate the model, results obtained in a laboratory by the gravimetric method were used. The proposed model proved to be efficient and reliable in measuring moisture in compost, reaching a correlation coefficient of 0.9939 between the moisture content verified by gravimetric analysis and the prediction obtained by the Sensor Node.

Toxicity and physicochemical parameters of composts including distinct residues from agribusiness and slaughterhouse sludge

Composting is useful for treatment of residues from agribusiness, but the potential toxicity of the final compost should be evaluated before its agricultural destination. The objective of this study was to evaluate the physicochemical characteristics and the toxicity of agribusiness residues using onion seeds as bioindicators. All tested treatments were composed by sludge from a swine slaughterhouse and sawdust. Besides the control, which included no additional materials, the other treatments included aviary bedding, rice husk and residue from tobacco industries as structuring materials. After 120 days of composting, for all treatments, the temperature inside the composting piles approached the environmental temperature, the physicochemical parameters indicated that the composts were stabilized and, except for the treatment including tobacco residues, that could be used for agriculture without impairing plant germination. Although the treatments including tobacco residues and rice husk showed evidence of cytotoxicity and genotoxicity at the beginning of the composting period, that was not observed for the treatment including aviary bedding. Such potential toxicity was not observed at the end of composting for any of the tested treatments.

Nanoparticle conjugated with aptamer anti-MUC1/Y for inflammatory arthritis

Aptamers may form well-defined three-dimensional structures binding with high affinity and stability to a specific receptor. The aptamer anti-MUC1 isoform Y is one the most used due the affinity to MUC1, which is overexpressed in several types of cancer and inflammation process. In this study we have developed, characterized, in vitro as in vivo evaluated a nanoaptamer (anti-MUC1/Y) as a nanoagent for rheumatoid arthritis treatment. The results showed that a nanoaptamer with a size range of 241 nm was produced. The entrapment efficacy was 90% with a biodistribution showing a high hepatic uptake (>98%). The results in vivo showed a potent effect in arthritis experimental model, especially in low doses. The results corroborate the applicability of this nanosystem for RA treatment.

Intra-articular use of radium dichloride ([223Ra] RaCl2) showed relevant anti-inflammatory response on experimental arthritis model

Rheumatoid arthritis (RA) is an inflammatory chronic autoimmune disease. The treatment of RA is difficult and, in many cases, ineffective, and the arsenal of drugs is limited. Due the longevity of the disease, RA may cause extreme musculoskeletal disorders with a high impact on quality of life. Also, RA is related with severe comorbidities decreasing the life expectancy. Finally, RA has been reported to impact in economy and healthy public. In this direction, the necessity to discover new strategies to efficiently treat RA is immediate. In this direction, we have reported the use of low doses of [²²³Ra] RaCl₂ (radium dichloride) as intra-articular injection to treat RA. Mice were post-treated with [²²³Ra] RaCl₂ (1.48 µCi; i.a.) 24 h after zymosan stimulus. Zymosan-induced arthrithis is responsible for leucocyte recruitment (total leukocytes, neutrophils, and mononuclear cells), which were inhibited by intra-articular injection of [223Ra] RaCl2 (69%, 77%, and 66%, respectively).

Effects of canola oil and antioxidants on performance, serum parameters, carcass traits, and rumen fermentation patterns of Nellore cattle

Several nutritional strategies have been used in beef cattle production in order to increase animal performance and profitability. However, in the past two decades, the increase of consumer preference for functional foods has driven the investigation for improving food via adding functional substances to animal diets. We evaluated the effect of canola oil supplementation associated with vitamin E and selenium on performance, rumen metabolism, carcass traits, meat tenderness, and serum, liver, and meat status of antioxidants in finishing Nellore males. Animals were fed for 106 days in a feedlot and were randomly distributed in a 2 × 2 factorial arrangement: two levels of oil in the diet (no inclusion and 3% canola oil, defined as diet without oil inclusion (NO) and effect of oil (OIL), respectively) and two levels of antioxidants in the diet (no inclusion and 2.5 mg of Se/kg of DM + 500 UI of vitamin E/kg of DM, defined as diet without antioxidant inclusion (NA) and effect of the antioxidants (ANT), respectively). DM intake (kg/day) was evaluated daily; performance and serum were analysed at the beginning of the feedlot and every 28 days. Animals were slaughtered and hot carcass weight (kg) was recorded; ruminal fluid and liver samples were collected. At 24 h postmortem, carcass pH was recorded and the Longissimus thoracis was sampled. There was no significant effect of the OIL*ANT interaction (P > 0.05) for any trait evaluated. Bulls fed OIL presented greater final BW (P < 0.01), average daily gain (kg/day; P < 0.01), feed efficiency (P < 0.01), rump fat thickness (P8RF; P < 0.05), and greater tenderness; the ANT diet increased P8RF (P < 0.05). The levels of selenium and vitamin E in serum, liver, and meat were increased (P < 0.01) with the inclusion of ANT. ANT did not change triiodothyronine (T3, ng/mL) and thyroxine (T4, µg/gL) serum concentrations but decreased serum glucose levels. The treatments did not affect (P > 0.05) ruminal parameters or the protozoa population. Our results showed that the inclusion of 3% canola oil in the diet DM increased performance, feed efficiency, carcass fat deposition, and tenderness, with no effect on rumen fermentation and protozoa population of Nellore cattle in a feedlot system. The inclusion of ANT in the cattle diet did not affect performance or rumen parameters. However, the levels of ANT were increased in the serum, liver, and meat, enriching the final product with these compounds.

Phytotoxicity as an indicator of stability of broiler production residues

Beddings used for successive broiler lots act as substrate to absorb water and feed from the excreta and may be subsequently used as agricultural fertilizers. This study evaluated the physicochemical characteristics and the phytotoxicity of beddings used to raise five consecutive broiler lots in five aviaries. Samples were collected for beddings not used yet and for beddings used at each of the five broiler lots. Lettuce and cucumber seeds were considered as phytotoxicity bioindicators. As beddings were used for greater number of lots, N, Ca, K, Mg and P contents generally increased, but the C content decreased, the pH alkalinized and humidity was reduced (P < 0.05). The germination index for lettuce and cucumber seeds was reduced with increased bedding (P < 0.05). Beddings used for at least five broiler lots presented decreased C:N ratio and would not recommended for agricultural use due to its toxicity for both tested seeds.

Addition of Bacillus sp. inoculums in bedding for swine on a pilot scale: effect on microbial population and bedding temperature

Thermal and microbiological characteristics of beddings for swine were compared according to their depth and of addition of inoculums. Bedding was added to boxes at 0.25 (25D) and 0.50 m (50D), with three treatments: control (no inoculums); T1, with 250 g of Bacillus cereus var. toyoii at 8.4 × 10(7) CFU; and T2, with 250 g of a pool of B. subtilis, Bacillus licheniformis and Bacillus polymyxa at 8.4 × 10(7) CFU (250 g for 25D and 500 g for 50D). Mean temperatures were 28.5 ± 3.9 at the surface and 35.2 ± 8.9 inside the beddings. The most probable number (MPN) of thermophilic bacteria was higher for T1 and T2 than for the control (P<0.05). The MPN of thermophilic bacteria and fungi was greater for D50 than for D25 (P<0.05). The use of 25D without inoculums is recommended due to the reduction of thermophilic microbiota.