Non-invasive in vivo imaging of tumour-associated cathepsin B by a highly selective inhibitory DARPin

Cysteine cathepsins often contribute to cancer progression due to their overexpression in the tumour microenvironment and therefore present attractive targets for non-invasive diagnostic imaging. However, the development of highly selective and versatile small molecule probes for cathepsins has been challenging. Here, we targeted tumour-associated cathepsin B using designed ankyrin repeat proteins (DARPins). The selective DARPin 8h6 inhibited cathepsin B with picomolar affinity (K_i = 35 pM) by binding to a site with low structural conservation in cathepsins, as revealed by the X-ray structure of the complex. DARPin 8h6 blocked cathepsin B activity in tumours ex vivo and was successfully applied in in vivo optical imaging in two mouse breast cancer models, in which cathepsin B was bound to the cell membrane or secreted to the extracellular milieu by tumour and stromal cells. Our approach validates cathepsin B as a promising diagnostic and theranostic target in cancer and other inflammation-associated diseases.

NLRP3 tyrosine phosphorylation is controlled by protein tyrosine phosphatase PTPN22

Inflammasomes form as the result of the intracellular presence of danger-associated molecular patterns and mediate the release of active IL-1β, which influences a variety of inflammatory responses. Excessive inflammasome activation results in severe inflammatory conditions, but physiological IL-1β secretion is necessary for intestinal homeostasis. Here, we have described a mechanism of NLRP3 inflammasome regulation by tyrosine phosphorylation of NLRP3 at Tyr861. We demonstrated that protein tyrosine phosphatase non-receptor 22 (PTPN22), variants in which are associated with chronic inflammatory disorders, dephosphorylates NLRP3 upon inflammasome induction, allowing efficient NLRP3 activation and subsequent IL-1β release. In murine models, PTPN22 deficiency resulted in pronounced colitis, increased NLRP3 phosphorylation, but reduced levels of mature IL-1β. Conversely, patients with inflammatory bowel disease (IBD) that carried an autoimmunity-associated PTPN22 variant had increased IL-1β levels. Together, our results identify tyrosine phosphorylation as an important regulatory mechanism for NLRP3 that prevents aberrant inflammasome activation.

Structures of designed armadillo-repeat proteins show propagation of inter-repeat interface effects

The armadillo repeat serves as a scaffold for the development of modular peptide-recognition modules. In order to develop such a system, three crystal structures of designed armadillo-repeat proteins with third-generation N-caps (YIII-type), four or five internal repeats (M-type) and second-generation C-caps (AII-type) were determined at 1.8 Å (His-YIIIM4AII), 2.0 Å (His-YIIIM5AII) and 1.95 Å (YIIIM5AII) resolution and compared with those of variants with third-generation C-caps. All constructs are full consensus designs in which the internal repeats have exactly the same sequence, and hence identical conformations of the internal repeats are expected. The N-cap and internal repeats M1 to M3 are indeed extremely similar, but the comparison reveals structural differences in internal repeats M4 and M5 and the C-cap. These differences are caused by long-range effects of the C-cap, contacting molecules in the crystal, and the intrinsic design of the repeat. Unfortunately, the rigid-body movement of the C-terminal part impairs the regular arrangement of internal repeats that forms the putative peptide-binding site. The second-generation C-cap improves the packing of buried residues and thereby the stability of the protein. These considerations are useful for future improvements of an armadillo-repeat-based peptide-recognition system.

Specific targeting of human caspases using designed ankyrin repeat proteins

Abstract Caspases play important roles in cell death, differentiation, and proliferation. Due to their high homology, especially of the active site, specific targeting of a particular caspase using substrate analogues is very difficult. Although commercially available small molecules based on peptides are lacking high specificity due to overlapping cleavage motives between different caspases, they are often used as specific tools. We have selected designed ankyrin repeat proteins (DARPins) against human caspases 1-9 and identified high-affinity binders for the targeted caspases, except for caspase 4. Besides previously reported caspase-specific DARPins, we generated novel DARPins (D1.73, D5.15, D6.11, D8.1, D8.4, and D9.2) and confirmed specificity for caspases 1, 5, 6, and 8 using a subset of caspase family members. In addition, we solved the crystal structure of caspase 8 in complex with DARPin D8.4. This binder interacts with non-conserved residues on the large subunit, thereby explaining its specificity. Structural analysis of this and other previously published crystal structures of caspase/DARPin complexes depicts two general binding areas either involving active site forming loops or a surface area laterally at the large subunit of the enzyme. Both surface areas involve non-conserved surface residues of caspases.

Altering lamina assembly reveals lamina-dependent and -independent functions for A-type lamins

Lamins are intermediate filament proteins that form a fibrous meshwork, called the nuclear lamina, between the inner nuclear membrane and peripheral heterochromatin of metazoan cells. The assembly and incorporation of lamin A/C into the lamina, as well as their various functions, are still not well understood. Here, we employed designed ankyrin repeat proteins (DARPins) as new experimental tools for lamin research. We screened for DARPins that specifically bound to lamin A/C, and interfered with lamin assembly in vitro and with incorporation of lamin A/C into the native lamina in living cells. The selected DARPins inhibited lamin assembly and delocalized A-type lamins to the nucleoplasm without modifying lamin expression levels or the amino acid sequence. Using these lamin binders, we demonstrate the importance of proper integration of lamin A/C into the lamina for nuclear mechanical properties and nuclear envelope integrity. Finally, our study provides evidence for cell-type-specific differences in lamin functions.

A Transporter Motor Taken Apart: Flexibility in the Nucleotide Binding Domains of a Heterodimeric ABC Exporter

ABC exporters are ubiquitous multidomain transport proteins that couple ATP hydrolysis at a pair of nucleotide binding domains to substrate transport across the lipid bilayer mediated by two transmembrane domains. Recently, the crystal structure of the heterodimeric ABC exporter TM287/288 was determined. One of its asymmetric ATP binding sites is called the degenerate site; it binds nucleotides tightly but is impaired in terms of ATP hydrolysis. Here we report the crystal structures of both isolated motor domains of TM287/288. Unexpectedly, structural elements constituting the degenerate ATP binding site are disordered in these crystals and become structured only in the context of the full-length transporter. In addition, hydrogen bonding patterns of key residues, including those of the catalytically important Walker B and the switch loop motifs, are fundamentally different in the solitary NBDs compared to those in the intact transport protein. The structures reveal crucial interdomain contacts that need to be established for the proper assembly of the functional transporter complex.

Unusual structural features revealed by the solution NMR structure of the NLRC5 caspase recruitment domain

The cytosolic nucleotide-binding domain and leucine-rich repeat-containing receptors (NLRs) are key sensors for bacterial and viral invaders and endogenous stress signals. NLRs contain a varying N-terminal effector domain that regulates the downstream signaling events upon its activation and determines the subclass to which a NLR member belongs. NLRC5 contains an unclassified N-terminal effector domain that has been reported to interact downstream with the tandem caspase recruitment domain (CARD) of retinoic acid-inducible gene I (RIG-I). Here we report the solution structure of the N-terminal effector domain of NLRC5 and in vitro interaction experiments with the tandem CARD of RIG-I. The N-terminal effector domain of NLRC5 adopts a six α-helix bundle with a general death fold, though it displays specific structural features that are strikingly different from the CARD. Notably, α-helix 3 is replaced by an ordered loop, and α-helix 1 is devoid of the characteristic interruption. Detailed structural alignments between the N-terminal effector domains of NLRC5 with a representative of each death-fold subfamily showed that NLRC5 fits best to the CARD subfamily and can be called an atypical CARD. Due to the specific structural features, the atypical CARD also displays a different electrostatic surface. Because the shape and charge of the surface is crucial for the establishment of a homotypic CARD-CARD interaction, these specific structural features seem to have a significant effect on the interaction between the atypical CARD of NLRC5 and the tandem RIG-I CARD.

Biocrystallography in Switzerland: achievements and future perspectives

The first protein crystallography group in Switzerland was installed at the Biozentrum of the University of Basel approximately 40 years ago. Since then protein crystallography has grown and matured remarkably and is now established in the molecular biology, biochemistry or biological medicine departments of most major Swiss Universities as well as in the pharmaceutical industry and in biotech startup companies. Swiss X-ray biocrystallography groups have made remarkable contributions from the beginning and have brought Switzerland to the forefront in biostructural research during the last 5 to 10 years. Switzerland has now a leading position in the areas of supramolecular complexes, membrane proteins and structure-based drug design in pharmaceutical and biotech industries. Protein crystallography on the outer membrane protein ompF as well as the development of the lipidic cubic phase crystallization methodology has been pioneered at the Biozentrum. The latter found its somewhat late recognition through the recent explosion in structure determinations of the seven transmembrane helix G-coupled receptors. Highlights from Swiss structural biology groups in the field of supramolecular complexes include the structures of ribosomal particles, of the nucleosome and the pilus assembly complex of uropathogenic E. coli. On the membrane protein side advances in the field of ABC transporters and ion channels are world-recognized achievements of Swiss structural biology. Dedicated laboratories at many academic and industrial institutions, their current research programs, the availability of excellent infrastructure and the continuing efforts to build new facilities such as the SwissFEL indicate an even brighter future for structural biology in Switzerland.

Structure and substrate-induced conformational changes of the secondary citrate/sodium symporter CitS revealed by electron crystallography

The secondary Na+/citrate symporter CitS of Klebsiella pneumoniae is the best-characterized member of the 2-hydroxycarboxylate transporter family. The recent projection structure gave insight into its overall structural organization. Here, we present the three-dimensional map of dimeric CitS obtained with electron crystallography. Each monomer has 13 a-helical transmembrane segments; six are organized in a distal helix cluster and seven in the central dimer interface domain. Based on structural analyses and comparison to VcINDY, we propose a molecular model for CitS, assign the helices, and demonstrate the internal structural symmetry. We also present projections of CitS in several conformational states induced by the presence and absence of sodium and citrate as substrates. Citrate binding induces a defined movement of a helices within the distal helical cluster. Based on this, we propose a substrate translocation site and conformational changes that are in agreement with the transport model of ‘‘alternating access’’.

Chimeric hERG channels containing a tetramerization domain are functional and stable

Biochemical and detailed structural information of human ether-a-go-go-related gene (hERG) potassium channels are scarce but are a prerequisite to understand the unwanted interactions of hERG with drugs and the effect of mutations that lead to long QT syndrome. Despite the huge interest in hERG, to our knowledge, procedures that provide a purified, functional, and tetrameric hERG channel are not available. Here, we describe hybrid hERG molecules, termed chimeric hERG channels, in which the N-terminal Per-Arnt-Sim (PAS) domain is deleted and the C-terminal C-linker as well as the cyclic nucleotide binding domain (CNBD) portion is replaced by an artificial tetramerization domain. These chimeric hERG channels can be overexpressed in HEK cells, solubilized in detergent, and purified as tetramers. When expressed in Xenopus laevis oocytes, the chimeric channels exhibit efficient trafficking to the cell surface, whereas a hERG construct lacking the PAS and C-linker/CNBD domains is retained in the cytoplasm. The chimeric hERG channels retain essential hERG functions such as voltage-dependent gating and inhibition by astemizole and the scorpion toxin BeKm-1. The chimeric channels are thus powerful tools for helping to understand the contribution of the cytoplasmic hERG domains to the gating process and are suitable for in vitro biochemical and structural studies.

Design, construction, and characterization of a second-generation DARP in library with reduced hydrophobicity

Designed ankyrin repeat proteins (DARPins) are well-established binding molecules based on a highly stable nonantibody scaffold. Building on 13 crystal structures of DARPin-target complexes and stability measurements of DARPin mutants, we have generated a new DARPin library containing an extended randomized surface. To counteract the enrichment of unspecific hydrophobic binders during selections against difficult targets containing hydrophobic surfaces such as membrane proteins, the frequency of apolar residues at diversified positions was drastically reduced and substituted by an increased number of tyrosines. Ribosome display selections against two human caspases and membrane transporter AcrB yielded highly enriched pools of unique and strong DARPin binders which were mainly monomeric. We noted a prominent enrichment of tryptophan residues during binder selections. A crystal structure of a representative of this library in complex with caspase-7 visualizes the key roles of both tryptophans and tyrosines in providing target contacts. These aromatic and polar side chains thus substitute the apolar residues valine, leucine, isoleucine, methionine, and phenylalanine of the original DARPins. Our work describes biophysical and structural analyses required to extend existing binder scaffolds and simplifies an existing protocol for the assembly of highly diverse synthetic binder libraries.

The structure of Bradyrhizobium japonicum transcription factor FixK2 unveils sites of DNA binding and oxidation

FixK2 is a regulatory protein that activates a large number of genes for the anoxic and microoxic, endosymbiotic, and nitrogen-fixing life styles of the α-proteobacterium Bradyrhizobium japonicum. FixK2 belongs to the cAMP receptor protein (CRP) superfamily. Although most CRP family members are coregulated by effector molecules, the activity of FixK2 is negatively controlled by oxidation of its single cysteine (Cys-183) located next to the DNA-binding domain and possibly also by proteolysis. Here, we report the three-dimensional x-ray structure of FixK2, a representative of the FixK subgroup of the CRP superfamily. Crystallization succeeded only when (i) an oxidation- and protease-insensitive protein variant (FixK2(C183S)-His6) was used in which Cys-183 was replaced with serine and the C terminus was fused with a hexahistidine tag and (ii) this protein was allowed to form a complex with a 30-mer double-stranded target DNA. The structure of the FixK2-DNA complex was solved at a resolution of 1.77 Å, at which the protein formed a homodimer. The precise protein-DNA contacts were identified, which led to an affirmation of the canonical target sequence, the so-called FixK2 box. The C terminus is surface-exposed, which might explain its sensitivity to specific cleavage and degradation. The oxidation-sensitive Cys-183 is also surface-exposed and in close proximity to DNA. Therefore, we propose a mechanism whereby the oxo acids generated after oxidation of the cysteine thiol cause an electrostatic repulsion, thus preventing specific DNA binding.

Specific inhibition of caspase-3 by a competitive DARPin: molecular mimicry between native and designed inhibitors

Dysregulation of apoptosis is associated with several human diseases. The main apoptotic mediators are caspases, which propagate death signals to downstream targets. Executioner caspase-3 is responsible for the majority of cleavage events and its therapeutic potential is of high interest with to date several available active site peptide inhibitors. These molecules inhibit caspase-3, but also homologous caspases. Here, we describe caspase-3 specific inhibitors D3.4 and D3.8, which have been selected from a library of designed ankyrin repeat proteins (DARPins). The crystal structures of D3.4 and mutants thereof show how high specificity and inhibition is achieved. They also show similarities in the binding mode with that of the natural caspase inhibitor XIAP (X-linked inhibitor of apoptosis). The kinetic data reveal a competitive inhibition mechanism. D3.4 is specific for caspase-3 and does not bind the highly homologous caspase-7. D3.4 therefore is an excellent tool to define the precise role of caspase-3 in the various apoptotic pathways.

Generation of an antibody toolbox to characterize hERG

The human ether-a-go-go related gene (hERG) potassium channel plays a major role in the repolarization of the cardiac action potential. Inhibition of the hERG function by mutations or a wide variety of pharmaceutical compounds cause long QT syndrome and lead to potentially lethal arrhythmias. For detailed insights into the structural and biochemical background of hERG function and drug binding, the purification of recombinant protein is essential. Because the hERG channel is a challenging protein to purify, fast and easy techniques to evaluate different expression, solubilization and purification conditions are of primary importance. Here, we describe the generation of a set of 12 monoclonal antibodies against hERG. Beside their suitability in western blot, immunoprecipitation and immunostaining, these antibodies were used to establish a sandwich ELISA for the detection and relative quantification of hERG in different expression systems. Furthermore, a Fab fragment was used in fluorescence size exclusion chromatography to determine the oligomeric state of hERG after solubilization. These new tools can be used for a fast and efficient screening of expression, solubilization and purification conditions.

Human caspases in vitro: expression, purification and kinetic characterization

A number of strategies and protocols for the expression, purification and kinetic characterization of human caspases are described in the literature. We have systematically revised these protocols and present comprehensive optimized expression and purification protocols for caspase-1 to -9 as well as improved assay conditions for their reproducible kinetic characterization. Our studies on active site titration revealed that the reproducibility is strongly affected by the presence of DTT in the assay buffer. Furthermore, we observed that not all caspases show a linear relationship between enzymatic activity and protein concentration, which explains the discrepancy between published values of specific activities from different laboratories. Our broad kinetic analysis allows the conclusion that the dependency of caspase activities on protein concentration is an effect of concentration-dependent dimerization, which can also be influenced by kosmotropic salts. The protocol recommendations as an outcome of this work will yield higher reproducibility regarding expression and purification of human caspases and contribute to standardization of enzyme kinetic data.

Tuning the drug efflux activity of an ABC transporter in vivo by in vitro selected DARPin binders

ABC transporters use the energy from binding and hydrolysis of ATP to import or extrude substrates across the membrane. Using ribosome display, we raised designed ankyrin repeat proteins (DARPins) against detergent solubilized LmrCD, a heterodimeric multidrug ABC exporter from Lactococcus lactis. Several target-specific DARPin binders were identified that bind to at least three distinct, partially overlapping epitopes on LmrD in detergent solution as well as in native membranes. Remarkably, functional screening of the LmrCD-specific DARPin pools in L. lactis revealed three homologous DARPins which, when generated in LmrCD-expressing cells, strongly activated LmrCD-mediated drug transport. As LmrCD expression in the cell membrane was unaltered upon the co-expression of activator DARPins, the activation is suggested to occur at the level of LmrCD activity. Consistent with this, purified activator DARPins were found to stimulate the ATPase activity of LmrCD in vitro when reconstituted in proteoliposomes. This study suggests that membrane transporters are tunable in vivo by in vitro selected binding proteins. Our approach could be of biopharmaceutical importance and might facilitate studies on molecular mechanisms of ABC transporters.

Structure-based optimization of designed Armadillo-repeat proteins

The armadillo domain is a right-handed super-helix of repeating units composed of three α-helices each. Armadillo repeat proteins (ArmRPs) are frequently involved in protein-protein interactions, and because of their modular recognition of extended peptide regions they can serve as templates for the design of artificial peptide binding scaffolds. On the basis of sequential and structural analyses, different consensus-designed ArmRPs were synthesized and show high thermodynamic stabilities, compared to naturally occurring ArmRPs. We determined the crystal structures of four full-consensus ArmRPs with three or four identical internal repeats and two different designs for the N- and C-caps. The crystal structures were refined at resolutions ranging from 1.80 to 2.50 Å for the above mentioned designs. A redesign of our initial caps was required to obtain well diffracting crystals. However, the structures with the redesigned caps caused domain swapping events between the N-caps. To prevent this domain swap, 9 and 6 point mutations were introduced in the N- and C-caps, respectively. Structural and biophysical analysis showed that this subsequent redesign of the N-cap prevented domain swapping and improved the thermodynamic stability of the proteins. We systematically investigated the best cap combinations. We conclude that designed ArmRPs with optimized caps are intrinsically stable and well-expressed monomeric proteins and that the high-resolution structures provide excellent structural templates for the continuation of the design of sequence-specific modular peptide recognition units based on armadillo repeats.

Asymmetry in the homodimeric ABC transporter MsbA recognized by a DARPin

ABC transporters harness the energy from ATP binding and hydrolysis to translocate substrates across the membrane. Binding of two ATP molecules at the nucleotide binding domains (NBDs) leads to the formation of an outward-facing state. The conformational changes required to reset the transporter to the inward-facing state are initiated by sequential hydrolysis of the bound nucleotides. In a homodimeric ABC exporter such as MsbA responsible for lipid A transport in Escherichia coli, sequential ATP hydrolysis implies the existence of an asymmetric conformation. Here we report the in vitro selection of a designed ankyrin repeat protein (DARPin) specifically binding to detergent-solubilized MsbA. Only one DARPin binds to the homodimeric transporter in the absence as well as in the presence of nucleotides, suggesting that it recognizes asymmetries in MsbA. DARPin binding increases the rate of ATP hydrolysis by a factor of two independent of the substrate-induced ATPase stimulation. Electron paramagnetic resonance (EPR) measurements are found to be in good agreement with the available crystal structures and reveal that DARPin binding does not affect the large nucleotide-driven conformational changes of MsbA. The binding epitope was mapped by cross-linking and EPR to the membrane-spanning part of the transmembrane domain (TMD). Using cross-linked DARPin-MsbA complexes, 8-azido-ATP was found to preferentially photolabel one chain of the homodimer, suggesting that the asymmetries captured by DARPin binding at the TMDs are propagated to the NBDs. This work demonstrates that in vitro selected binders are useful tools to study the mechanism of membrane proteins.

TRIM5 structure, HIV-1 capsid recognition, and innate immune signaling

TRIM5 is a restriction factor that blocks retrovirus infection soon after the virion core enters the cell cytoplasm. Restriction activity is targeted to the virion core via recognition of the capsid protein lattice that encases the viral genomic RNA. In common with all of the many TRIM family members, TRIM5 has RING, B-box, and coiled-coil domains. As an E3 ubiquitin ligase TRIM5 cooperates with the heterodimeric E2, UBC13/UEV1A, to activate the TAK1 (MAP3K7) kinase, NF-κB and AP-1 signaling, and the transcription of inflammatory cytokines and chemokines. TAK1, UBC13, and UEV1A all contribute to TRIM5-mediated retrovirus restriction activity. Interaction of the carboxy-terminal PRYSPRY or cyclophilin domains of TRIM5 with the retroviral capsid lattice stimulates the formation of a complementary lattice by TRIM5, with greatly increased TRIM5 E3 activity, and host cell signal transduction. Structural and biochemical studies on TRIM5 have opened a much needed window on how the innate immune system detects the distinct molecular features of HIV-1 and other retroviruses.

A series of Fas receptor agonist antibodies that demonstrate an inverse correlation between affinity and potency

Receptor agonism remains poorly understood at the molecular and mechanistic level. In this study, we identified a fully human anti-Fas antibody that could efficiently trigger apoptosis and therefore function as a potent agonist. Protein engineering and crystallography were used to mechanistically understand the agonistic activity of the antibody. The crystal structure of the complex was determined at 1.9 Å resolution and provided insights into epitope recognition and comparisons with the natural ligand FasL (Fas ligand). When we affinity-matured the agonist antibody, we observed that, surprisingly, the higher-affinity antibodies demonstrated a significant reduction, rather than an increase, in agonist activity at the Fas receptor. We propose and experimentally demonstrate a model to explain this non-intuitive impact of affinity on agonist antibody signalling and explore the implications for the discovery of therapeutic agonists in general.

In silico identification and crystal structure validation of caspase-3 inhibitors without a P1 aspartic acid moiety

Using a fragment-based docking procedure, several small-molecule inhibitors of caspase-3 were identified and tested and the crystal structures of three inhibitor complexes were determined. The crystal structures revealed that one inhibitor (NSC 18508) occupies only the S1 subsite, while two other inhibitors (NSC 89167 and NSC 251810) bind only to the prime part of the substrate-binding site. One of the major conformational changes observed in all three caspase-3-inhibitor complexes is a rotation of the Tyr204 side chain, which blocks the S2 subsite. In addition, the structural variability of the residues shaping the S1-S4 as well as the S1' subsites supports an induced-fit mechanism for the binding of the inhibitors in the active site. The high-resolution crystal structures reported here provide novel insights into the architecture of the substrate-binding site, which might be useful for the design of more potent caspase inhibitors.

Selective and sensitive monitoring of caspase-1 activity by a novel bioluminescent activity-based probe

The role of caspase-1 in inflammation has been studied intensely over recent years. However, the research of caspase-1 has remained difficult mainly due to the lack of sensitive and selective tools to monitor not only its abundance but also its activity. Here we present a bioluminescent activity-based probe (ABP) for caspase-1, developed by the Reverse Design concept, where chemically optimized protease inhibitors are turned into selective substrate ABPs. The probe exhibits excellent selectivity for caspase-1 and ∼1000-fold increase in sensitivity compared to available fluorogenic peptidic caspase-1 substrates. Moreover, we have been able to monitor and quantify specific caspase-1 activity directly in cell lysates. The activity correlated well with processing of prointerleukin-1β and prointerleukin-18 in phorbol 12-myristate 13-acetate (PMA)-stimulated cells. A detectable caspase-1 activity was present also in nonstimulated cells, consistent with processing of constitutively expressed prointerleukin-18.

HIV-1 protease inhibition potential of functionalized polyoxometalates

Polyoxometalates (POMs) are interesting biomedical agents due to their versatile anticancer and antiviral properties, such as remarkable anti-HIV activity. Although POMs are tunable and easily accessible inorganic drug prototypes in principle, their full potential can only be tapped by enhancing their biocompatibility, for example, through organic functionalization. We have therefore investigated the HIV-1 protease inhibition potential of functionalized Keggin- and Dawson-type POMs with organic side chains. Their inhibitory performance was furthermore compared to other POM types, and the buffer dependence of the results is discussed. In addition, chemical shift mapping NMR experiments were performed to exclude POM–substrate interactions. Whereas the introduction of organic side chains into POMs is a promising approach in principle, the influence of secondary effects on the reaction system also merits detailed investigation.

Structure and function of sphingosine-1-phosphate lyase, a key enzyme of sphingolipid metabolism

Sphingosine-1-phosphate lyase (SPL), a key enzyme of sphingolipid metabolism, catalyzes the irreversible degradation of sphingoid base phosphates. Its main substrate sphingosine-1-phosphate (S1P) acts both extracellularly, by binding G protein-coupled receptors of the lysophospholipid receptor family, and inside the cell, as a second messenger. There, S1P takes part in regulating various cellular processes and its levels are tightly regulated. SPL is a pivotal enzyme regulating S1P intracellular concentrations and a promising drug target for the design of immunosuppressants. We structurally and functionally characterized yeast SPL (Dpl1p) and its first prokaryotic homolog, from Symbiobacterium thermophilum. The Dpl1p structure served as a basis for a very reliable model of Homo sapiens SPL. The above results, together with in vitro and in vivo studies of SPL mutants, reveal which residues are involved in activity and substrate binding and pave the way to studies aimed at controlling the activity of this pivotal enzyme.

Studies of the molecular mechanism of caspase-8 activation by solution NMR

Caspases are the key players of apoptosis and inflammation. They are present in the cells as latent precursors, procaspases, and are activated upon an apoptotic or inflammatory stimulus. The activation mechanism of caspases has been studied extensively by biochemical and biophysical methods. Additional structural information on active caspases with a variety of different inhibitors bound at the active site is available. In this study, we investigated the cleavage mechanism of caspase-8 from its zymogen to active caspase-8 by solution NMR and by biochemical methods. The intermolecular cleavage reaction using the catalytically inactive C285A procaspase-8 mutant is triggered by adding caspase-8 and followed by (15)N,(1)H-NMR spectroscopy. The spectrum that initially resembles the one of procaspase-8 gradually over time changes to that of caspase-8, and disappearing peaks display exponential decaying intensities. Removal of either one of the cleavage recognition motifs in the linker, or phosphorylation at Tyr380, is shown to reduce the rate of the cleavage reaction. The data suggest that dimerization repositions the linker to become suitable for intermolecular processing by the associated protomer. Furthermore, analysis of inhibitor binding to the active caspase-8 reveals an induced-fit mechanism for substrate binding.

The crystal structure of human pyrin b30.2 domain: implications for mutations associated with familial Mediterranean fever

The inherited autoinflammatory syndrome familial Mediterranean fever (FMF) is characterized by recurrent episodes of fever, which are independent of any bacterial or viral infections. This disease is associated with point mutations in the mefv gene product pyrin. Although the precise molecular functions of pyrin are unknown, it seems to be involved in the maturation and secretion of interleukin-1beta. Approximately two thirds of all FMF-associated mutations cluster in the C-terminal B30.2 domain of pyrin. To investigate the molecular consequences of FMF-associated mutations, we determined the crystal structure of the pyrin B30.2 domain at 1.35-A resolution. The comparison with other B30.2/ligand complex structures revealed a shallow cavity, which seems to be involved in binding the pyrin ligand. The bottom of this cavity is covered mainly with hydrophobic amino acids, suggesting that pyrin recognizes its ligand by hydrophobic contacts and surface complementarities. FMF-associated mutations cluster around two sites on the B30.2 surface. Approximately two thirds, including those mutations with the most severe disease outcomes, are observed in the vicinity of the predicted peptide binding site, suggesting that they will have a direct impact on ligand binding. A second mutational hot spot was observed on the opposite side of the B30.2 domain in the neighbourhood of its artificial N-terminus. Although most FMF-associated mutations are solvent exposed, several will modify the main-chain conformation of loops. The experimental crystal structure of the pyrin B30.2 domain serves as a basis for an accurate modelling of these mutations.

Structural and biochemical studies on procaspase-8: new insights on initiator caspase activation

Caspases are proteases with an active-site cysteine and aspartate specificity in their substrates. They are involved in apoptotic cell death and inflammation, and dysfunction of these enzymes is directly linked to a variety of diseases. Caspase-8 initiates an apoptotic pathway triggered by external stimuli. It was previously characterized in its active inhibitor bound state by crystallography. Here we present the solution structure of the monomeric unprocessed catalytic domain of the caspase-8 zymogen, procaspase-8, showing for the first time the position of the linker and flexibility of the active site forming loops. Biophysical studies of carefully designed mutants allowed disentangling dimerization and processing, and we could demonstrate lack of activity of monomeric uncleaved procaspase-8 and of a processed but dimerization-incompetent mutant. The data provide experimental support in so-far unprecedented detail, and reveal why caspase-8 (and most likely other initiator caspases) needs the dimerization platform during activation.

Chaperone-assisted crystallography with DARPins

The structure of proteins that are difficult to crystallize can often be solved by forming a noncovalent complex with a helper protein--a crystallization "chaperone." Although several such applications have been described to date, their handling usually is still very laborious. A valuable addition to the present repertoire of binding proteins is the recently developed designed ankyrin repeat protein (DARPin) technology. DARPins are built based on the natural ankyrin repeat protein fold with randomized surface residue positions allowing specific binding to virtually any target protein. The broad potential of these binding proteins for X-ray crystallography is illustrated by five cocrystal structures that have been determined recently comprising target proteins from distinct families, namely a sugar binding protein, two kinases, a caspase, and a membrane protein. This article reviews the opportunities of this technology for structural biology and the structural aspects of the DARPin-protein complexes.

Structure of the recombinant antibody Fab fragment f3p4

The structure of the antibody Fab fragment f3p4, which was selected from a subset of the synthetic HuCAL antibody library to bind the sodium citrate symporter CitS, is described at 1.92 A resolution. Comparison with computational models revealed deviations in a few framework positions and in the binding loops. The crystals belong to space group P2(1)2(1)2 and contain four molecules in the asymmetric unit, with unit-cell parameters a=102.77, b=185.92, c=102.97 A. These particular unit-cell parameters allowed pseudo-merohedral twinning; interestingly, the twinning law relates a twofold screw axis to a twofold axis.

Vacuolar protein sorting: two different functional states of the AAA-ATPase Vps4p

The vacuolar protein sorting (Vps) pathway, in which Vps4 class I AAA-ATPases play a central role, regulates growth factor receptors, immune response, and developmental signaling, and participates in tumor suppression, apoptosis, and retrovirus budding. We present the first atomic structure of the nucleotide-free yeast His(6)DeltaNVps4p dimer and its AMPPNP (5'-adenylyl-beta,gamma-imidodiphosphate)-bound tetradecamer, derived from a cryo electron microscopy map. Vps4p dimers form two distinct heptameric rings and accommodate AAA cassettes in a head-to-head--not in a head-to-tail-fashion as in class II AAA-ATPases. Our model suggests a mechanism for disassembling ESCRT (endosomal sorting complex required for transport) complexes by movements of substrate-binding domains located at the periphery of the tetradecamer during ATP hydrolysis in one ring, followed by translocation through the central pore and ATP hydrolysis in the second ring.

Allosteric inhibition of aminoglycoside phosphotransferase by a designed ankyrin repeat protein

Aminoglycoside phosphotransferase (3')-IIIa (APH) is a bacterial kinase that confers antibiotic resistance to many pathogenic bacteria and shares structural homology with eukaryotic protein kinases. We report here the crystal structure of APH, trapped in an inactive conformation by a tailor-made inhibitory ankyrin repeat (AR) protein, at 2.15 A resolution. The inhibitor was selected from a combinatorial library of designed AR proteins. The AR protein binds the C-terminal lobe of APH and thereby stabilizes three alpha helices, which are necessary for substrate binding, in a significantly displaced conformation. BIAcore analysis and kinetic enzyme inhibition experiments are consistent with the proposed allosteric inhibition mechanism. In contrast to most small-molecule kinase inhibitors, the AR proteins are not restricted to active site binding, allowing for higher specificity. Inactive conformations of pharmaceutically relevant enzymes, as can be elucidated with the approach presented here, represent powerful starting points for rational drug design.

Drug export pathway of multidrug exporter AcrB revealed by DARPin inhibitors

The multidrug exporter AcrB is the inner membrane component of the AcrAB-TolC drug efflux system in Escherichia coli and is responsible for the resistance of this organism to a wide range of drugs. Here we describe the crystal structure of the trimeric AcrB in complex with a designed ankyrin-repeat protein (DARPin) inhibitor at 2.5-Å resolution. The three subunits of AcrB are locked in different conformations revealing distinct channels in each subunit. There seems to be remote conformational coupling between the channel access, exit, and the putative proton-translocation site, explaining how the proton motive force is used for drug export. Thus our structure suggests a transport pathway not through the central pore but through the identified channels in the individual subunits, which greatly advances our understanding of the multidrug export mechanism.

The high-resolution crystal structure of trimeric AcrB solved using DARPin inhibitors reveals insights into the drug export mechanism via hemi-channels in each subunit.

Bacterial resistance to antibiotics is a major challenge for the current treatment of infectious diseases. One way bacteria can escape destruction is by pumping out administered drugs through specific transporter proteins that span the cell membrane. We used designer proteins that bind to and stabilize proteins of interest in order to study the major drug efflux pump of Escherichia coli, AcrB. After selecting for designed ankyrin repeat proteins (DARPins) that inhibit this pump, we determined the crystal structure of a DARPin inhibitor in complex with AcrB. We confirmed that the AcrB is split into three subunits, each of which exhibits distinctly different conformations. Moreover, we show that each subunit has a differently shaped substrate transport channel; these variable channels provide unique snapshots of the different conformations adopted by AcrB during transport of a substrate. The structure also offers an explanation for how substrate export is structurally coupled to simultaneous proton import—thus significantly improving our understanding of the mechanism of AcrB. This is the first report of the selection and co-crystallization of a DARPin with a membrane protein, which demonstrates the potential of DARPins not only as inhibitors but also as tools for the structural investigation of integral membrane proteins.

Inhibition of Caspase-2 by a Designed Ankyrin Repeat Protein: Specificity, Structure, and Inhibition Mechanism

Specific and potent caspase inhibitors are indispensable for the dissection of the intricate pathways leading to apoptosis. We selected a designed ankyrin repeat protein (DARPin) from a combinatorial library that inhibits caspase-2 in vitro with a subnanomolar inhibition constant and, in contrast to the peptidic caspase inhibitors, with very high specificity for this particular caspase. The crystal structure of this inhibitor (AR_F8) in complex with caspase-2 reveals the molecular basis for the specificity and, together with kinetic analyses, the allosteric mechanism of inhibition. The structure also shows a conformation of the active site that can be exploited for the design of inhibitory compounds. AR_F8 is a specific inhibitor of an initiator caspase and has the potential to help identify the function of caspase-2 in the complex biological apoptotic signaling network.

Evidence for a novel domain of bacterial outer membrane ushers

Many pathogenic bacteria possess adhesive surface organelles (called pili), anchored to their outer membrane, which mediate the first step of infection by binding to host tissue. Pilus biogenesis occurs via the "chaperone-usher" pathway: the usher, a large outer membrane protein, binds complexes of a periplasmic chaperone with pilus subunits, unloads the subunits from the chaperone, and assembles them into the pilus, which is extruded into the extracellular space. Ushers comprise an N-terminal periplasmic domain, a large transmembrane beta-barrel central domain, and a C-terminal periplasmic domain. Since structural data are available only for the N-terminal domain, we performed an in-depth bioinformatic analysis of bacterial ushers. Our analysis led us to the conclusion that the transmembrane beta-barrel region of ushers contains a so far unrecognized soluble domain, the "middle domain", which possesses a beta-sandwich fold. Two other bacterial beta-sandwich domains, the TT0351 protein from Thermus thermophilus and the carbohydrate binding module CBM36 from Paenibacillus polymyxa, are possible distant relatives of the usher "middle domain". Several mutations reported to abolish in vivo pilus formation cluster in this region, underlining its functional importance.

Opportunities for structure-based design of protease-directed drugs

As a result of the recent enormous technological progress, experimental structure determination has become an integral part of the development of drugs against disease-related target proteins. The post-translational modification of proteins is an important regulatory process in living organisms; one such example is lytic processing by peptidases. Many different peptidases represent disease targets and are being used in structure-based drug design approaches. The development of drugs such as aliskiren and tipranavir, which inhibit renin and HIV protease, respectively, testifies to the success of this approach.

Design, synthesis, and evaluation of aza-peptide Michael acceptors as selective and potent inhibitors of caspases-2, -3, -6, -7, -8, -9, and -10

Aza-peptide Michael acceptors are a novel class of inhibitors that are potent and specific for caspases-2, -3, -6, -7, -8, -9, and -10. The second-order rate constants are in the order of 10(6) M(-1) s(-1). The aza-peptide Michael acceptor inhibitor 18t (Cbz-Asp-Glu-Val-AAsp-trans-CH=CH-CON(CH(2)-1-Naphth)(2) is the most potent compound and it inhibits caspase-3 with a k(2) value of 5620000 M(-1) s(-1). The inhibitor 18t is 13700, 190, 6.4, 594, 37500, and 173-fold more selective for caspase-3 over caspases-2, -6, -7, -8, -9, and -10, respectively. Aza-peptide Michael acceptors designed with caspase specific sequences are selective and do not show any cross reactivity with clan CA cysteine proteases such as papain, cathepsin B, and calpains. High-resolution crystal structures of caspase-3 and caspase-8 in complex with aza-peptide Michael acceptor inhibitors demonstrate the nucleophilic attack on C2 and provide insight into the selectivity and potency of the inhibitors with respect to the P1' moiety.

nDsbD: a redox interaction hub in the Escherichia coli periplasm

DsbD is a redox-active protein of the inner Escherichia coli membrane possessing an N-terminal (nDsbD) and a C-terminal (cDsbD) periplasmic domain. nDsbD interacts with four different redox proteins involved in the periplasmic disulfide isomerization and in the cytochrome c maturation systems. We review here the studies that led to the structural characterization of all soluble DsbD domains involved and, most importantly, of trapped disulfide intermediate complexes of nDsbD with three of its four redox partners. These results revealed the structural features enabling nDsbD, a 'redox hub' with an immunoglobulin-like fold, to interact efficiently with its different thioredoxin-like partners.