The cellulose-binding domain (CBD(Cex)) of an exoglucanase from Cellulomonas fimi: production in Escherichia coli and characterization of the polypeptide

The gene fragment encoding the cellulose-binding domain (CBD) of an exoglucanase (Cex) from Cellulomonas fimi was subcloned and expressed in Escherichia coli. Transcription from the lac promoter coupled with translation from a consensus prokaryotic ribosome binding site led to the production of large quantities of CBD(Cex) (up to 25% total soluble cell protein). The polypeptide leaked into the culture supernatant (up to 50 mg . L(-1)), facilitating one-step purification by affinity chromatography on cellulose. The 11-kDa polypeptide reacted with Cex antiserum. Absence of free thiols indicated that the two Cys residues of CBD(Cex) form a disulfide bridge. It had the same N-terminal amino acid sequence as CBD(Cex) prepared from Cex by proteolysis, plus two additional N-terminal amino acid residues (Ala and Ser) encoded by the Nhel site introduced during plasmid construction. CBD(Cex) bound to a variety of beta-1, 4-glycans with different affinities and saturation levels. Adsorption to bacterial microcrystalline cellulose was dependent on the temperature, but not on the pH.

Do cellulose binding domains increase substrate accessibility?

This article provides an overview of various theories proposed during the past five decades to describe the enzymatic hydrolysis of cellulose highlighting the major shifts that these theories have undergone. It also describes the effect of the cellulose-binding domain (CBD) of an exoglucanase/xylanase from bacterium Cellulomonas fimi on the enzymatic hydrolysis of Avicel. Pretreatment of Avicel with CBDCex at 4 and 37 degrees C as well as simultaneous addition of CBDCex to the hydrolytic enzyme (Celluclast, Novo, Nordisk) reduced the initial rate of hydrolysis owing to irreversible binding of CBD proteins to the substrate's binding sites. Nonetheless, near complete hydrolysis was achieved even in the presence of CBDCex. Protease treatment of both pure and CBDCex-treated Avicel reduced the substrates' hydrolyzability, perhaps owing to proteolysis of the hydrolyzing enzyme (Celluclast) by the residual Proteinase K remaining in the substrate. Better protocols for complete removal of CBD proteins from the substrate need to be developed to investigate the effect of CBD adsorption on cellulose digestibility.

Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues

The family 2a carbohydrate-binding module (CBM2a) of xylanase 10A from Cellulomonas fimi binds to the crystalline regions of cellulose. It does not share binding sites with the N-terminal family 4 binding module (CBM4-1) from the cellulase 9B from C.fimi, a module that binds strictly to soluble sugars and amorphous cellulose. The binding of CBM2a to crystalline matrices is mediated by several residues on the binding face, including three prominent, solvent-exposed tryptophan residues. Binding to crystalline cellulose was analyzed by making a series of conservative (phenylalanine and tyrosine) and non-conservative substitutions (alanine) of each solvent-exposed tryptophan (W17, W54 and W72). Other residues on the binding face with hydrogen bonding potential were substituted with alanine. Each tryptophan plays a different role in binding; a tryptophan is essential at position 54, a tyrosine or tryptophan at position 17 and any aromatic residue at position 72. Other residues on the binding face, with the exception of N15, are not essential determinants of binding affinity. Given the specificity of CBM2a, the structure of crystalline cellulose and the dynamic nature of the binding of CBM2a, we propose a model for the interaction between the polypeptide and the crystalline surface.

Comparing the thermodynamic stabilities of a related thermophilic and mesophilic enzyme

Several models have been proposed to explain the high temperatures required to denature enzymes from thermophilic organisms; some involve greater maximum thermodynamic stability for the thermophile, and others do not. To test these models, we reversibly melted two analogous protein domains in a two-state manner. E2cd is the isolated catalytic domain of cellulase E2 from the thermophile Thermomonospora fusca. CenAP30 is the analogous domain of the cellulase CenA from the mesophile Cellulomonas fimi. When reversibly denatured in a common buffer, the thermophilic enzyme E2cd had a temperature of melting (Tm) of 72.2 degrees C, a van't Hoff enthalpy of unfolding (DeltaHVH) of 190 kcal/mol, and an entropy of unfolding (DeltaSu) of 0.55 kcal/(mol*K); the mesophilic enzyme CenAP30 had a Tm of 56.4 degrees C, a DeltaHVH of 107 kcal/mol, and a DeltaSu of 0. 32 kcal/(mol*K). The higher DeltaHVH and DeltaSu values for E2cd suggest that its free energy of unfolding (DeltaGu) has a steeper dependence on temperature at the Tm than CenAP30. This result supports models that predict a greater maximum thermodynamic stability for thermophilic enzymes than for their mesophilic counterparts. This was further explored by urea denaturation. Under reducing conditions at 30 degrees C, E2cd had a concentration of melting (Cm) of 5.2 M and a DeltaGu of 11.2 kcal/mol; CenAP30 had a Cm of 2.6 M and a DeltaGu of 4.3 kcal/mol. Under nonreducing conditions, the Cm and DeltaGu of CenAP30 were increased to 4.5 M and 10.8 kcal/mol at 30 degrees C; the Cm for E2cd was increased to at least 7.4 M at 32 degrees C. We were unable to determine a DeltaGu value for E2cd under nonreducing conditions due to problems with reversibility. These data suggest that E2cd attains its greater thermal stability (DeltaTm = 15.8 degrees C) through a greater thermodynamic stability (DeltaDeltaGu = 6.9 kcal/mol) compared to its mesophilic analogue CenAP30.

Characterization and affinity applications of cellulose-binding domains

Cellulose-binding domains (CBDs) are discrete protein modules found in a large number of carbohydrolases and a few nonhydrolytic proteins. To date, almost 200 sequences can be classified in 13 different families with distinctly different properties. CBDs vary in size from 4 to 20 kDa and occur at different positions within the polypeptides; N-terminal, C-terminal and internal. They have a moderately high and specific affinity for insoluble or soluble cellulosics with dissociation constants in the low micromolar range. Some CBDs bind irreversibly to cellulose and can be used for applications involving immobilization, others bind reversibly and are more useful for separations and purifications. Dependent on the CBD used, desorption from the matrix can be promoted under various different conditions including denaturants (urea, high pH), water, or specific competitive ligands (e.g. cellobiose). Family I and IV CBDs bind reversibly to cellulose in contrast to family II and III CBDs which are in general, irreversibly bound. The binding of family II CBDs (CBD(Cex)) to crystalline cellulose is characterized by a large favourable increase in entropy indicating that dehydration of the sorbent and the protein are the major driving forces for binding. In contrast, binding of family IV CBDs (CBD(N1)) to amorphous or soluble cellulosics is driven by a favourable change in enthalpy which is partially offset by an unfavourable entropy change. Hydrogen bond formation and van der Waals interactions are the main driving forces for binding. CBDs with affinity for crystalline cellulose are useful tags for classical column affinity chromatography. The affinity of CBD(N1) for soluble cellulosics makes it suitable for use in large-scale aqueous two-phase affinity partitioning systems.

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Probing the role of tryptophan residues in a cellulose-binding domain by chemical modification

The cellulose-binding domain (CBDCex) of the mixed function glucanase-xylanase Cex from Cellulomonas fimi contains five tryptophans, two of which are located within the beta-barrel structure and three exposed on the surface (Xu GY et al., 1995, Biochemistry 34:6993-7009). Although all five tryptophans can be oxidized by N-bromosuccinimide (NBS), stopped-flow measurements show that three tryptophans react faster than the other two. NMR analysis during the titration of CBDCex with NBS shows that the tryptophans on the surface of the protein are fully oxidized before there is significant reaction with the two buried tryptophans. Additionally, modification of the exposed tryptophans does not affect the conformation of the backbone of CBDCex, whereas complete oxidation of all five tryptophans denatures the polypeptide. The modification of the equivalent of one and two tryptophans by NBS reduces binding of CBDCex to cellulose by 70% and 90%, respectively. This confirms the direct role of the exposed aromatic residues in the binding of CBDCex to cellulose. Although adsorption to cellulose does afford some protection against NBS, as evidenced by the increased quantity of NBS required to oxidize all of the tryptophan residues, the polypeptide can still be oxidized completely when adsorbed. This suggests that, whereas the binding appears to be irreversible overall [Ong E et al., 1989, Bio/Technology 7:604-607], each of the exposed tryptophans interacts reversibly with cellulose.

Characterization of CenC, an enzyme from Cellulomonas fimi with both endo- and exoglucanase activities

The cenC gene, encoding beta-1,4-glucanase C (CenC) from Cellulomonas fimi, was overexpressed in Escherichia coli with a tac-based expression vector. The resulting polypeptide, with an apparent molecular mass of 130 kDa, was purified from the cell extracts by affinity chromatography on cellulose followed by anion-exchange chromatography. N-terminal sequence analysis showed the enzyme to be properly processed. Mature CenC was optimally active at pH 5.0 and 45 degrees C. The enzyme was extremely active on soluble, fluorophoric, and chromophoric glycosides (4-methylumbelliferyl beta-glycosides, 2'-chloro-4'-nitrophenyl-beta-D-cellobioside, and 2'-chloro-4'-nitrophenyl-lactoside) and efficiently hydrolyzed carboxymethyl cellulose, barley beta-glucan, lichenan, and, to a lesser extent, glucomannan. CenC also hydrolyzed acid-swollen cellulose, Avicel, and bacterial microcrystalline cellulose. However, degradation of the latter was slow compared with its degradation by CenB, another C. fimi cellulose belonging to the same enzyme family. CenC acted with inversion of configuration at the anomeric carbon, in accordance with its classification as a family 9 member. The enzyme released mainly cellobiose from soluble cellodextrins and insoluble cellulose. Attack appeared to be from the reducing chain ends. Analysis of carboxymethyl cellulose hydrolysis suggests that CenC is semiprocessive enzyme with both endo- and exoglucanase activities.

Cellobiohydrolase B, a second exo-cellobiohydrolase from the cellulolytic bacterium Cellulomonas fimi

The gene cbhB from the cellulolytic bacterium Cellulomonas fimi encodes a polypeptide of 1090 amino acids. Cellobiohydrolase B (CbhB) is 1037 amino acids long, with a calculated molecular mass of 109765 Da. The enzyme comprises five domains: an N-terminal catalytic domain of 643 amino acids, three fibronectin type III repeats of 97 amino acids each, and a C-terminal cellulose-binding domain of 104 amino acids. The catalytic domain belongs to family 48 of glycosyl hydrolases. CbhB has a very low activity on CM-cellulose. Viscometric analysis of CM-cellulose hydrolysis indicates that the enzyme is an exoglucanase. Cellobiose is the major product of hydrolysis of cellulose. In common with two other exoglycanases from C. fimi, CbhB has low but detectable endoglucanase activity. CbhB is the second exo-cellobiohydrolase found in C. fimi. Therefore, the cellulase system of C. fimi resembles those of fungi in comprising multiple endoglucanases and cellobiohydrolases.

Solution structure of a cellulose-binding domain from Cellulomonas fimi by nuclear magnetic resonance spectroscopy

Multidimensional, multinuclear nuclear magnetic resonance spectroscopy combined with dynamical simulated annealing has been used to determine the structure of a 110 amino acid cellulose-binding domain (CBD) from Cex, a beta-1,4-glycanase from the bacterium Cellulomonas fimi (CBDcex). An experimental data set comprising 1795 interproton NOE-derived restraints, 50 phi, 34 chi 1, and 106 hydrogen bond restraints was used to calculate 20 final structures. The calculated structures have an average root-mean-square (rms) deviation about the mean structure of 0.41 A for backbone atoms and 0.67 A for all heavy atoms when fitted over the secondary structural elements. Chromatography, ultracentrifugation, and 15N NMR relaxation experiments demonstrate that CBDcex is a dimer in solution. While attempts to measure NOEs across the dimer interface were unsuccessful, a computational strategy was employed to generate dimer structures consistent with the derived data set. The results from the dimer calculations indicate that, while the monomer topologies produced in the context of the dimer can be variable, the relative positioning of secondary structural elements and side chains present in the monomer are restored upon dimer formation. CBDcex forms an extensive beta-sheet structure with a beta-barrel fold. Titration with cellohexaose, [beta-D-glucopyranosyl-(1,4)]5-D-glucose, establishes that Trp 54 and 72 participate in cellulose binding. Analysis of the structure shows that these residues are adjacent in space and exposed to solvent. Together with other proximate hydrophilic residues, these residues form a carbohydrate-binding cleft, which appears to be a feature common to all CBDs of the same family.

Enhancement of the endo-beta-1,4-glucanase activity of an exocellobiohydrolase by deletion of a surface loop

In the commonly accepted mechanism for enzymatic hydrolysis of cellulose, endo-beta-1,4-glucanases randomly cleave glucosidic bonds within glucan polymers, providing sites for attack by exo-cellobiohydrolases (EC 3.2.1.91). It has been proposed that hydrolysis by Trichoderma reesei cellobiohydrolase II is restricted to the ends of cellulose polymers because two surface loops cover its active site to form a tunnel. In a closely related endoglucanase, E2 from Thermomonospora fusca, access to the substrate appears to be relatively unhindered because the carboxyl-proximal loop is shortened, and the amino-proximal loop is displaced. The hypothesis was examined by deletion of a region in Cellulomonas fimi cellobiohydrolase A corresponding to part of the carboxyl-proximal loop of T. reesei cellobiohydrolase II. The mutation enhanced the endoglucanase activity of the enzyme on soluble O-(carboxymethyl)cellulose and altered its activities on 2',4'-dinitrophenyl-beta-D-cellobioside, insoluble cellulose, and cellotetraose.

C1-Cx revisited: intramolecular synergism in a cellulase

Endoglucanase A (CenA) from the bacterium Cellulomonas fimi is composed of a catalytic domain and a nonhydrolytic cellulose-binding domain that can function independently. The individual domains interact synergistically in the disruption and hydrolysis of cellulose fibers. This intramolecular synergism is distinct from the well-known intermolecular synergism between individual cellulases. The catalytic domain corresponds to the hydrolytic Cx system and the cellulose-binding domain corresponds to the nonhydrolytic C1 system postulated by Reese et al. [Reese, E. T., Sui, R. G. H. & Levinson, H. S. (1950) J. Bacteriol. 59, 485-497] to be required for the hydrolysis of cellulose.

Crystal structure of the catalytic domain of the beta-1,4-glycanase cex from Cellulomonas fimi

beta-1,4-Glycanases, principally cellulases and xylanases, are responsible for the hydrolysis of plant biomass. The bifunctional beta-1,4-xylanase/glucanase Cex from the bacterium Cellulomonas fimi, one of a large family of cellulases/xylanases, depolymerizes oligosaccharides and releases a disaccharide unit from the substrate nonreducing end. Hydrolysis occurs with net retention of the anomeric configuration of the sugar through a double-displacement mechanism involving a covalent glycosyl-enzyme intermediate. The active site nucleophile, Glu233, has been unambiguously identified by trapping of such an intermediate [Tull et al. (1991) J. Biol. Chem. 266, 15621-15625] and the acid/base catalyst, Glu127, by detailed kinetic analysis of mutants [MacLeod et al. (1994) Biochemistry 33, 6371-6376]. However, little is known about the enzyme's overall folding and its active site architecture. We report here the high-resolution crystal structure of the catalytic domain of Cex. The atomic structure refinement results in a model that includes 2400 protein atoms and 45 water molecules, with an R-factor of 0.217 for data extending to 1.8-A resolution. The protein forms an eight-parallel-stranded alpha/beta-barrel, which is a novel folding pattern for a microbial beta-glycanase. The active site, inferred from the location of Glu233, Glu127, and other conserved residues, is an open cleft on the carboxy-terminal end of the alpha/beta-barrel. An extensive hydrogen-bonding network stabilizes the ionization states of the key residues; in particular, the Asp235-His205-Glu233 hydrogen-bonding network may play a role in modulating the ionization state of Glu233 and in controlling local charge balance during the reaction.

Changes in the molecular-size distribution of insoluble celluloses by the action of recombinant Cellulomonas fimi cellulases

Specific patterns of attacks of cotton, bacterial cellulose and bacterial microcrystalline cellulose (BMCC) by recombinant cellulases of Cellulomonas fimi were investigated. Molecular-size distributions of the celluloses were determined by high-performance size-exclusion chromatography. Chromatography of cotton and bacterial celluloses revealed single major peaks centered over progressively lower molecular-mass positions during attack by endoglucanase CenA. In advanced stages, a second peak appeared at very low average size (approx. 11 glucosyl units); ultimate weight losses were approximately 30%. The isolated catalytic domain of CenA, p30, gave results very similar to those with complete CenA. CenA did not effectively depolymerize or solubilize BMCC significantly. Molecular-size distributions of cotton and bacterial cellulose incubated with endoglucanases CenB or CenD exhibited one major peak regardless of incubation time; low-molecular-mass fragments did not accumulate. Weight losses were 40 and 35% respectively. The single peak shifted to lower-molecular-mass positions as incubation continued, but high-molecular-mass material persisted. CenB and CenD readily attacked and solubilized BMCC (approx. 70%). We conclude that CenA attacks cellulose by preferentially cleaving completely through the cellulose microfibrils at the amorphous sites, and much more slowly by degrading the crystalline surfaces. Conversely, CenB and CenD cleave the amorphous regions much less efficiently while vigorously degrading the surfaces of the crystalline regions of the microfibrils.

A streptavidin-cellulose-binding domain fusion protein that binds biotinylated proteins to cellulose

A fusion protein, Sta-CBDCex, which comprises streptavidin with a cellulose-binding domain (CBDCex) fused to its C terminus, was produced in the cytoplasm of Escherichia coli, where it formed inclusion bodies. Renatured Sta-CBDCex, recovered from the inclusion bodies, adsorbed to Avicel, a microcrystalline cellulose. The cellulose-bound Sta-CBDCex in turn bound biotinylated alkaline phosphatase or biotinylated beta-glucosidase. The immobilized beta-glucosidase remained fully active during 2 weeks of continuous column operation at 50 degrees C.

Cellobiohydrolase A (CbhA) from the cellulolytic bacterium Cellulomonas fimi is a beta-1,4-exocellobiohydrolase analogous to Trichoderma reesei CBH II

The gene cbhA from the cellulolytic bacterium Cellulomonas fimi encodes a protein of 872 amino acids designated cellobiohydrolase A (CbhA). Mature CbhA contains 832 amino acid residues and has a predicted molecular mass of 85,349 Da. It is composed of five domains: an N-terminal catalytic domain, three repeated sequences of 95 amino acids, and a C-terminal cellulose-binding domain typical of other C. fimi glycanases. The structure and enzymatic activities of the CbhA catalytic domain are closely related to those of CBH II, an exocellobiohydrolase in the glycosyl hydrolase family B from the fungus Trichoderma reesei. CbhA is the first such enzyme to be characterized in bacteria. The data support the proposal that extended loops around the active site distinguish exohydrolases from endohydrolases in this enzyme family.

Stereochemical course of hydrolysis catalysed by Cellulomonas fimi CenE, a member of a new family of beta-1,4-glucanases

The gene for a previously identified, extracellular, 120 kDa cellulose-binding protein (Cbp120) was isolated from a Cellulomonas fimi genomic library and expressed in Escherichia coli. Qualitative analysis of CM-cellulose hydrolysis shows that Cbp120 is an endo-beta-1,4-glucanase. Cbp120, now renamed CenE, catalyzes hydrolysis of cellohexaose with inversion of anomeric carbon configuration, characteristic of a single displacement reaction. Partial sequencing of its gene shows that CenE has significant sequence similarity with the catalytic domains of five enzymes from cellulolytic bacteria. It is proposed that the six enzymes form a new family of beta-1,4-glucanases. CenE is the first enzyme from this family to be characterized stereochemically.

The cellulose-binding domain of endoglucanase A (CenA) from Cellulomonas fimi: evidence for the involvement of tryptophan residues in binding

Cellulomonas fimi endo-beta-1,4-glucanase A (CenA) contains a discrete N-terminal cellulose-binding domain (CBDCenA). Related CBDs occur in at least 16 bacterial glycanases and are characterized by four highly conserved Trp residues, two of which correspond to W14 and W68 of CBDCenA. The adsorption of CBDCenA to crystalline cellulose was compared with that of two Trp mutants (W14A and W68A). The affinities of the mutant CBDs for cellulose were reduced by approximately 50- and 30-fold, respectively, relative to the wild type. Physical measurements indicated that the mutant CBDs fold normally. Fluorescence data indicated that W14 and W68 were exposed on the CBD, consistent with their participation in binding to cellobiosyl residues on the cellulose surface.

An internal cellulose-binding domain mediates adsorption of an engineered bifunctional xylanase/cellulase

A chimeric xylanase/endoglucanase (XynCenA) with an internal cellulose-binding domain was constructed by fusing the Bacillus subtilis xyn gene fragment to the 5'-end of the Cellulomonas fimi cenA. A polyhistidine-encoding sequence was also fused to the 5'-end of the xyn gene. The gene fusion was overexpressed in Escherichia coli and the fusion polypeptide purified from the cell extracts using the polyhistidine tail. The hybrid protein behaved like the parental endoglucanase or xylanase when assayed on a number of soluble and insoluble cellulosic substrates or xylans. The presence of two distinct active sites and the internal cellulose-binding domain did not significantly affect the hydrolysis of any of these substrates. However, the fusion protein exhibited a strong affinity for both microcrystalline cellulose (Avicel) and regenerated chitin. Like the parental endoglucanase, bound XynCenA could not be eluted from these polysaccharides with either low or high salt buffer or distilled water. More stringent conditions, such as 1% SDS or 8 M guanidinium hydrochloride, fully desorbed the protein. The fusion protein did not adsorb significantly to insoluble xylan.

Visualization of the adsorption of a bacterial endo-beta-1,4-glucanase and its isolated cellulose-binding domain to crystalline cellulose

Endo-beta-1,4-glucanase A (CenA), a cellulase from the bacterium Cellulomonas fimi, is composed of two domains: a catalytic domain and a cellulose-binding domain. Adsorption of CenA and its isolated cellulose-binding domain (CBD.PTCenA) to Valonia cellulose microcrystals was examined by transmission electron microscopy using an antibody sandwich technique (CenA/CBD.PTCenA-alpha CenA IgG-protein A-gold conjugate). Adsorption of both CenA and CBD.PTCenA occurred along the lengths of the microcrystals, with an apparent preference for certain crystal faces or edges. CenA or CBD.PTCenA, but not the isolated catalytic domain, were shown to prevent the flocculation of microcrystalline bacterial cellulose. The cellulose-binding domain may assist crystalline cellulose hydrolysis in vitro by promoting substrate dispersion.

Glu280 is the nucleophile in the active site of Clostridium thermocellum CelC, a family A endo-beta-1,4-glucanase

A new mechanism-based inactivator of beta-1,4-glucanases, 2',4'-dinitrophenyl-2-deoxy-2-fluoro-beta-D-cellobioside, was synthesized and used to trap the intermediate formed during catalysis by endoglucanase C (CelC) from Clostridium thermocellum. Ion spray mass spectrometry confirmed the 1:1 stoichiometry of the incorporation of the inactivator into the enzyme. Inactivation followed the required pseudo first-order kinetic behavior and kinetic parameters for the process were determined. Although the intermediate trapped was relatively stable (t1/2 = 25 h), turnover was facilitated by transglycosylation following the addition of phenyl-beta-D-thiocellobioside and cellobiose, thus demonstrating the catalytic competence of the trapped intermediate. The nucleophilic amino acid residue involved was identified as Glu280 by labeling the enzyme with tritiated inactivator, cleaving it into peptides and sequencing the radiolabeled peptide. Ion spray mass spectrometric analysis of the peptide confirmed the sequence and the mode of attachment of the sugar to the peptide. Alignment of all known related beta-1,4-glucanases showed that Glu280 is strictly conserved in family A enzymes, consistent with its key role in catalysis.

Cellulose-binding polypeptides from Cellulomonas fimi: endoglucanase D (CenD), a family A beta-1,4-glucanase

Five cellulose-binding polypeptides were detected in Cellulomonas fimi culture supernatants. Two of them are CenA and CenB, endo-beta-1,4-glucanases which have been characterized previously; the other three were previously uncharacterized polypeptides with apparent molecular masses of 120, 95, and 75 kDa. The 75-kDa cellulose-binding protein was designated endoglucanase D (CenD). The cenD gene was cloned and sequenced. It encodes a polypeptide of 747 amino acids. Mature CenD is 708 amino acids long and has a predicted molecular mass of 74,982 Da. Analysis of the predicted amino acid sequence of CenD shows that the enzyme comprises four domains which are separated by short linker polypeptides: an N-terminal catalytic domain of 405 amino acids, two repeated sequences of 95 amino acids each, and a C-terminal domain of 105 amino acids which is > 50% identical to the sequences of cellulose-binding domains in Cex, CenA, and CenB from C. fimi. Amino acid sequence comparison placed the catalytic domain of CenD in family A, subtype 1, of beta-1,4-glycanases. The repeated sequences are more than 40% identical to the sequences of three repeats in CenB and are related to the repeats of fibronectin type III. CenD hydrolyzed the beta-1,4-glucosidic bond with retention of anomeric configuration. The activities of CenD towards various cellulosic substrates were quite different from those of CenA and CenB.

Endoglucanase CasA from alkalophilic Streptomyces strain KSM-9 is a typical member of family B of beta-1,4-glucanases

CasA is an endo-beta-1,4-glucanase from Streptomyces KSM-9 belonging to family B of beta-1,4-glucanases. A previous analysis of a portion of the corresponding gene (casA) revealed sequencing errors in a region encoding part of the catalytic site. Additional errors in the original sequence were suspected, based on sequence comparison of the C terminus of CasA with other members of its family. Re-sequencing of the remainder of the casA coding region showed that CasA is a typical member of family B.

Crystallization and preliminary X-ray diffraction analysis of the catalytic domain of Cex, an exo-beta-1,4-glucanase and beta-1,4-xylanase from the bacterium Cellulomonas fimi

Single crystals of the catalytic domain of Cex, an exo-beta-1,4-glucanase and beta-1,4-xylanase from the cellulolytic bacterium Cellulomonas fimi, have been grown in the presence of polyethylene glycol 4000 using the vapour diffusion technique. The crystals, which diffract to better than 2.0 A resolution, belong to space group P4(1)2(1)2 or P4(3)2(1)2 and have cell constants: a = b = 88.21 A, c = 81.10 A; alpha = beta = gamma = 90 degrees.

Streptomyces lividans glycosylates an exoglucanase (Cex) from Cellulomonas fimi

Exoglucanase Cex from Cellulomonas fimi is a glycoprotein [Langsford et al., J. Gen. Microbiol. 130 (1984) 1367-1376]. Cex produced by Streptomyces lividans from the cloned cex gene is also glycosylated. The extent and nature of glycosylation are similar for Cex from both organisms. The glycosylation affords protection against proteolysis for the enzymes from both organisms when they are bound to cellulose, but not in solution. The ability to glycosylate cloned gene products enhances the utility of Streptomyces as a host for the production of heterologous polypeptides.

The tertiary structure of endo-beta-1,4-glucanase B (CenB), a multidomain cellulase from the bacterium Cellulomonas fimi

Endo-beta-1,4-glucanase B (CenB) is a large (110 kDa) extracellular enzyme from the cellulolytic bacterium Cellulomonas fimi. CenB contains five domains, including a typical C.fimi cellulose-binding domain, separated by distinctive linker polypeptides (Meinke et al., 1991b). X-ray scattering analyses show that CenB has a highly elongated shape resembling beads on a string. The sizes of the polypeptides produced by treatment of CenB with proteases, together with their N-terminal amino acid sequences, show that at least two of the four linkers connecting the five domains of CenB are more sensitive to proteolysis than the domains themselves. It is concluded that the beads represent the domains of CenB, the string represents the linkers.

Stereoselective hydrolysis catalyzed by related beta-1,4-glucanases and beta-1,4-xylanases

Over 80 beta-1,4-glucanases and beta-1,4-xylanases can be classified into one of eight families on the basis of amino acid sequence similarities in their catalytic domains (Gilkes, N. R., Henrissat, B., Kilburn, D. G., Miller, R. C., Jr., and Warren, R. A. J. (1991) Microbiol. Rev. 55, 303-315). As a test of this classification, the stereochemical course of hydrolysis of 10 enzymes representative of five families has been determined using proton NMR. These data, together with published data for six additional enzymes, show that representatives of a given enzyme family have the same stereoselectivity: four families catalyze hydrolysis with retention of anomeric configuration, two with inversion. The results support the hypothesis that family members share a common general fold, active site topology, and catalytic mechanism.

Cellulose-binding domains: potential for purification of complex proteins

The endoglucanase CenA and the exoglucanase Cex from Cellulomonas fimi each contain a discrete cellulose-binding domain (CBD), at the amino-terminus or carboxyl-terminus respectively. The gene fragment encoding the CBD can be fused to the gene of a protein of interest. Using this approach hybrid proteins can be engineered which bind reversibly to cellulose and exhibit the biological activity of the protein partner. Alkaline phosphatase (PhoA) from Escherichia coli, and a beta-glucosidase (Abg) from an Agrobacterium sp. are dimeric proteins. The fusion polypeptides CenA-PhoA and Abg-CBC(Cex) are sensitive to proteolysis at the junctions between the fusion partners. Proteolysis results in a mixture of homo- and heterodimers; these bind to cellulose if one or both of the monomers carry a CBD, e.g. CenA-PhoA/CenA-PhoA and CenA-PhoA/PhoA. CBD fusion polypeptides could be used in this way to purify polypeptides which associate with the fusion partner.

The binding of Cellulomonas fimi endoglucanase C (CenC) to cellulose and Sephadex is mediated by the N-terminal repeats

Endoglucanase C (CenC) from Cellulomonas fimi binds to cellulose and to Sephadex. The enzyme has two contiguous 150-amino-acid repeats (N1 and N2) at its N-terminus and two unrelated contiguous 100-amino-acid repeats (C1 and C2) at its C-terminus. Polypeptides corresponding to N1, N1N2, C1, and C1C2 were produced by expression of appropriate cenC gene fragments in Escherichia coli. N1N2, but not N1 alone, binds to Sephadex; both polypeptides bind to Avicel, (a heterogeneous cellulose preparation containing both crystalline and non-crystalline components). Neither C1 nor C1C2 binds to Avicel or Sephadex. N1N2 and N1 bind to regenerated ('amorphous') cellulose but not to bacterial crystalline cellulose; the cellulose-binding domain of C. fimi exoglucanase Cex binds to both of these forms of cellulose. Amino acid sequence comparison reveals that N1 and N2 are distantly related to the cellulose-binding domains of Cex and C. fimi endoglucanases A and B.

Endoglucanase A from Cellulomonas fimi in which the hinge sequence of human IgA1 is substituted for the linker connecting its two domains is hydrolyzed by IgA proteases from Neisseria gonorrhoeae

The hinge in IgA1 and the linker in endoglucanase A (CenA) are quite similar. The IgA1 hinge is 18 amino acids long and contains only proline, threonine and serine. The linker in CenA is 27 amino acids long and contains only proline, threonine and a single serine. IgA proteases from Neisseria gonorrhoeae cleave Pro-Ser and Pro-Thr bonds within the IgA1 hinge sequence, but they do not attack CenA. When the linker sequence of CenA is replaced with the hinge sequence of IgA1, the hybrid polypeptide is susceptible to the N. gonorrhoeae proteases. It is cleaved within the hinge sequence at the same sites as IgA1.

The adsorption of a bacterial cellulase and its two isolated domains to crystalline cellulose

CenA is a bacterial cellulase (beta-1,4-glucanase) comprised of a globular catalytic domain joined to an extended cellulose-binding domain (CBD) by a short linker peptide. The adsorption of CenA and its two isolated domains to crystalline cellulose was analyzed. CenA and CBD.PTCenA' (the CBD plus linker) adsorbed rapidly to cellulose at 30 degrees C, and no net desorption of protein was observed during the following 16.7 h. There was no detectable adsorption of the catalytic domain. Scatchard plots of adsorption data for CenA and for CBD.PTCenA were nonlinear (concave upward). The adsorption of CenA and CBD.PTCenA exceeded 7 and 8 mumol/g cellulose, respectively, but saturation was not attained at the highest total protein concentrations employed. A new model for adsorption was developed to describe the interaction of a large ligand (protein) with a lattice of overlapping potential binding sites (cellobiose residues). A relative equilibrium association constant (Kr) of 40.5 and 45.3 liter.g cellulose-1 was estimated for CenA and CBD.PTCenA, respectively, according to this model. A similar Kr value (33.3 liter.g-1) was also obtained for Cex, a Cellulomonas fimi enzyme which contains a related CBD but which hydrolyzes both beta 1,4-xylosidic and beta-1,4-glucosidic bonds. It was estimated that the CBD occupies approximately 39 cellobiose residues on the cellulose surface.

Structural and functional relationships in two families of beta-1,4-glycanases

CenA and Cex are beta-1,4-glycanases produced by the cellulolytic bacterium Cellulomonas fimi. Both enzymes are composed of two domains and contain six Cys residues. Two disulfide bonds were assigned in both enzymes by peptide analysis of the isolated catalytic domains. A further disulfide bond was deduced in both cellulose-binding domains from the absence of free thiols under denaturing conditions. Corresponding Cys residues are conserved in eight of nine other known C. fimi-type cellulose-binding domains. CenA and Cex belong to families B and F, respectively, in the classification of beta-1,4-glucanases and beta-1,4-xylanases based on similarities in catalytic domain primary structure. Disulfide bonds in the CenA catalytic domain correspond to the two disulfide bonds in the catalytic domain of Trichoderma reesei cellobiohydrolase II (family B) which stabilize loops forming the active-site tunnel. Sequence alignment indicates the probable occurrence of disulfides at equivalent positions in the two other family B enzymes. Partial resequencing of the gene encoding Streptomyces KSM-9 beta-1,4-glucanase CasA (family B) revealed five errors in the original nucleotide sequence analysis. The corrected amino acid sequence contains an Asp residue corresponding to the proposed proton donor in hydrolysis catalysed by cellobiohydrolase II. Cys residues which form disulfide bonds in the Cex catalytic domain are conserved in XynZ of Clostridium thermocellum and Xyn of Cryptococcus albidus but not in the other eight known family F enzymes. Like other members of its family, Cex catalyses xylan hydrolysis. The catalytic efficiency (kcat/Km) for hydrolysis of the heterosidic bond of p-nitrophenyl-beta-D-xylobioside is 14,385 min-1.mM-1 at 25 degrees C; the corresponding kcat/Km for p-nitrophenyl-beta-D-cellobioside hydrolysis is 296 min-1.mM-1.

Bacterial cellulose-binding domain-like sequences in eucaryotic polypeptides

The catalytic domain of endoglucanase II of Trichoderma reesei and the spore germination-specific polypeptide 270-11 of Dictyostelium discoideum contain amino acid sequences which share identity with the sequences of the cellulose-binding domains of several bacterial beta-1,4-glycanases. This is the first report of the presence of such sequences in eucaryotic polypeptides.

Multiple domains in endoglucanase B (CenB) from Cellulomonas fimi: functions and relatedness to domains in other polypeptides

Endoglucanase B (CenB) from the bacterium Cellulomonas fimi is divided into five discrete domains by linker sequences rich in proline and hydroxyamino acids (A. Meinke, C. Braun, N. R. Gilkes, D. G. Kilburn, R. C. Miller, Jr., and R. A. J. Warren, J. Bacteriol. 173:308-314, 1991). The catalytic domain of 608 amino acids is at the N terminus. The sequence of the first 477 amino acids in the catalytic domain is related to the sequences of cellulases in family E, which includes procaryotic and eucaryotic enzymes. The sequence of the last 131 amino acids of the catalytic domain is related to sequences present in a number of cellulases from different families. The catalytic domain alone can bind to cellulose, and this binding is mediated at least in part by the C-terminal 131 amino acids. Deletion of these 131 amino acids reduces but does not eliminate activity. The catalytic domain is followed by three domains which are repeats of a 98-amino-acid sequence. The repeats are approximately 50% identical to two repeats of 95 amino acids in a chitinase from Bacillus circulans which are related to fibronectin type III repeats (T. Watanabe, K. Suzuki, K. Oyanagi, K. Ohnishi, and H. Tanaka, J. Biol. Chem. 265:15659-15665, 1990). The C-terminal domain of 101 amino acids is related to sequences, present in a number of bacterial cellulases and xylanases from different families, which form cellulose-binding domains (CBDs). It functions as a CBD when fused to a heterologous polypeptide. Cells of Escherichia coli expressing the wild-type cenB gene accumulate both native CenB and a stable proteolytic fragment of 41 kDa comprising the three repeats and the C-terminal CBD. The 41-kDa polypeptide binds to cellulose but lacks enzymatic activity.

Glutamic acid 274 is the nucleophile in the active site of a "retaining" exoglucanase from Cellulomonas fimi

In addition to its known substrate activity with p-nitrophenyl beta-cellobioside, the exoglucanase from Cellulomonas fimi has been shown to utilize substituted phenyl beta-glucosides as substrates, of which the best is 2',4'-dinitrophenyl beta-D-glucopyranoside. The enzyme can be inactivated by treatment with 2',4'-dinitrophenyl 2-deoxy-2-fluoro-beta-D-glucopyranoside, by trapping of the covalent intermediate in catalysis, as has been shown for a beta-glucosidase (Withers, S.G., and Street, I.P. (1988) J. Am. Chem. Soc. 110, 8551-8553). The intermediate formed is stable but can undergo turnover in the presence of cellobiose, reactivating the enzyme by transglycosylation. Using a tritium-labeled inactivator it has been possible to isolate and sequence a radiolabeled peptide from this enzyme, and the active site nucleophile has been identified as glutamic acid residue 274. This glutamic acid residue and its sequentially proximal amino acids are absolutely conserved in the homologous family F of cellulases.

Deletion of the linker connecting the catalytic and cellulose-binding domains of endoglucanase A (CenA) of Cellulomonas fimi alters its conformation and catalytic activity

The Pro-Thr box is a linker of 23 amino acids ((PT)4T(PT)7) connecting the catalytic domain and the cellulose-binding domain (CBD) of endoglucanase A (CenA) from the bacterium Cellulomonas fimi. Deletion of the Pro-Thr box alters the conformation of CenA by changing the relative orientation of the catalytic domain and the CBD. The tertiary structures of the catalytic domain and the CBD appear to be unchanged. The change in conformation reduces the catalytic efficiency of the enzyme and masks one of two protease-sensitive sites between the domains. The deletion does not affect the adsorption of the enzyme to microcrystalline cellulose, but it does affect its desorption from cellulose. The results suggest that the Pro-Thr box in CenA has an extended, kinked, and rigid conformation.

Domains in microbial beta-1, 4-glycanases: sequence conservation, function, and enzyme families

Several types of domain occur in beta-1, 4-glycanases. The best characterized of these are the catalytic domains and the cellulose-binding domains. The domains may be joined by linker sequences rich in proline or hydroxyamino acids or both. Some of the enzymes contain repeated sequences up to 150 amino acids in length. The enzymes can be grouped into families on the basis of sequence similarities between the catalytic domains. There are sequence similarities between the cellulose-binding domains, of which two types have been identified, and also between some domains of unknown function. The beta-1, 4-glycanases appear to have arisen by the shuffling of a relatively small number of progenitor sequences.

Enzyme immobilization using a cellulose-binding domain: Properties of a β-glucosidase fusion protein

Using molecular genetic techniques, a fusion protein has been produced which contains the cellulose-binding domain (CBD) of an exoglucanase (Cex) from Cellulomonas fimi fused to a beta-glucosidase (Abg) from Agrobacterium sp. The CBD functions as an affinity tag for the simultaneous purification and immobilization of the enzyme on cellulose. Binding to cellulose was stable for prolonged periods at temperatures from 4 degrees C to at least 50 degrees C, at ionic strengths from 10 mM to greater than 1 M, and at pH values below 8. The fusion protein can be desorbed from cellulose with distilled water or at pH greater than 8. Immobilized enzyme columns of the fusion protein bound to cotton fibers exhibited stable beta-glucosidase activity for at least 10 days of continuous operation at temperatures up to 37 degrees C. At higher temperatures, the bound enzyme lost activity. The thermal stability of the fusion protein was greatly improved by immobilization. Immobilization did not alter the pH stability. Except for its ability to bind to cellulose, the properties of the fusion protein were virtually the same as those of the native enzyme.

The tertiary structure of a bacterial cellulase determined by small-angle X-ray-scattering analysis

CenA from Cellulomonas fimi is a beta-1,4-endoglucanase that binds tightly to cellulose. X-ray-scattering analyses show that the enzyme is tadpole-shaped: the previously identified catalytic and cellulose-binding domains comprise the head and tail respectively. It appears that this structural and functional organization is common to several cellulases from bacteria and fungi.

Structural and functional analysis of a bacterial cellulase by proteolysis

CenA is an endo-beta 1,4-glucanase from the cellulolytic bacterium Cellulomonas fimi. It is a bifunctional enzyme comprising an amino-terminal cellulose-binding domain and a carboxyl-terminal catalytic domain joined by a short sequence of prolyl and threonyl residues (the Pro-Thr box). Additional structural and functional information was revealed by a detailed analysis of the products generated by proteolytic cleavage of a nonglycosylated form of CenA. An extracellular C. fimi protease attacked nonglycosylated CenA at the junctions between the Pro-Thr box and the two functional domains. A stable "core" peptide (p30), corresponding to the catalytic domain, remained after extensive proteolysis. p30 was resistant to further attack even in the presence of 2-mercaptoethanol plus urea or dithiothreitol, but treatment in the presence of sodium dodecyl sulfate allowed complete fragmentation to small peptides. Stable peptides, identical, or closely related to p30, were generated by alpha-chymotrypsin or papain. These results indicated that the catalytic domain adopts a tightly folded conformation affording protection from proteolytic attack. In contrast, the cellulose-binding domain showed a relatively loose conformation. Progressive proteolytic truncation from the amino terminus was apparent during incubation with alpha-chymotrypsin or papain, or with C. fimi protease under reducing conditions. Affinity for cellulose was retained by products missing up to 64 amino-terminal amino acids. The remaining carboxyl-proximal region of the cellulose-binding domain with affinity (47 amino acids) contained sequences highly conserved in analogous domains from other bacterial endo-beta 1,4-glucanases. By analogy with other systems, the properties of the Pro-Thr box are consistent with an elongated conformation. The results of this investigation suggest that CenA has a tertiary structure which resembles that of certain fungal cellulases.

Purification and characterization of endoglucanase C of Cellulomonas fimi, cloning of the gene, and analysis of in vivo transcripts of the gene

Two nonglycosylated endoglucanases which bind to Sephadex were purified from culture supernatants of Cellulomonas fimi grown on microcrystalline cellulose. Their Mrs were 120,000 and 130,000. The N-terminal amino acid sequences of the enzymes were identical, suggesting that the enzymes were related. A DNA fragment encoding this N-terminal sequence was cloned in Escherichia coli. The nucleotide sequence corresponding to the N-terminal amino acid sequence was preceded by a sequence encoding a typical leader peptide. Transcripts hybridizing to the cloned fragment were detected in total RNA isolated from C. fimi cells grown on carboxymethyl cellulose but not from cells grown on glycerol or glucose. Transcription started at a cluster of sites 53 to 59 nucleotides upstream of a GUG translation initiation codon and terminated at either of two closely spaced C residues immediately downstream of a region of potential secondary structure. The size of the transcript was approximately 3.5 kilobases, sufficient to encode a polypeptide of 130 kilodaltons. The 130-kilodalton polypeptide is designated endoglucanase C (CenC), and the gene encoding it is designated cenC.

Fusion to an endoglucanase allows alkaline phosphatase to bind to cellulose

Endoglucanase CenA of Cellulomonas fimi comprises an N-terminal cellulose-binding domain and a C-terminal catalytic domain joined together by a sequence of 23 proline and threonine residues (the Pro-Thr box). The domains function independently when separated by proteolysis. TnphoA has been used to generate cenA'-'phoA fusions. CenA'-'PhoA fusion polypeptides which contain the entire cellulose-binding domain of CenA bind to cellulose, allowing their purification from periplasmic extracts in a single, facile step. This result has implications for purification or immobilisation of chimeric proteins on a cheap cellulose matrix.

Precise excision of the cellulose binding domains from two Cellulomonas fimi cellulases by a homologous protease and the effect on catalysis

An endo-beta-1,4-glucanase (CenA) and an exo-beta-1,4-glucanase (Cex) were prepared from Escherichia coli expressing recombinant DNA of the cellulolytic bacterium Cellulomonas fimi. Purification was facilitated by the high affinities of these enzymes for cellulose. An extracellular C. fimi protease cleaved both enzymes in vivo in a highly specific manner. The affinity of the parent enzyme for cellulose was contained independently in an amino-terminal fragment (p20) of CenA and a carboxyl-terminal fragment (p8) of Cex. These fragments contained homologous amino acid sequences which were proposed to comprise cellulose binding domains. Corresponding fragments, p30 from CenA and p35 from Cex, which were unable to bind to cellulose, contained catalytic domains. In both enzymes, the two functional domains were joined by a hinge region consisting solely of prolyl and threonyl residues. The binding domain was excised from CenA by proteolytic cleavage immediately adjacent to the carboxyl terminus of this hinge. Cex was cleaved at an exactly analogous site. p30 and p35 retained several of the catalytic functions of their parent enzymes. However, p30 was less active than intact CenA against microcrystalline cellulose implying a critical role for the binding domain of CenA in the hydrolysis of crystalline substrate.

Glycosylation of bacterial cellulases prevents proteolytic cleavage between functional domains

Glycosylated cellulases from Cellulomonas fimi were compared with their non-glycosylated counterparts synthesized in Escherichia coli from recombinant DNA. Glycosylation of the enzymes does not significantly affect their kinetic properties, or their stabilities towards heat and pH. However, the glycosylated enzymes are protected from attack by a C. fimi protease when bound to cellulose, while the non-glycosylated enzymes yield active, truncated products with greatly reduced affinity for cellulose.

A bifunctional exoglucanase-endoglucanase fusion protein

A fusion was constructed between the cex gene of Cellulomonas fimi, which encodes an exoglucanase, and the cenA gene of the same organism, which encodes an endoglucanase. The cex-cenA fusion was expressed in Escherichia coli to give a fusion protein with both exoglucanase and endoglucanase activities. The fusion protein, unlike the cex and the cenA gene products from E. coli, did not bind to microcrystalline cellulose, presumably because it lacked an intact substrate-binding region. The fusion protein was exported to the periplasm in E. coli.

Sequence conservation and region shuffling in an endoglucanase and an exoglucanase from Cellulomonas fimi

Cellulomonas fimi produces an endoglucanase and an exoglucanase which bind strongly to cellulose. Each enzyme contains three distinct regions: a short sequence of about 20 amino acids containing only proline and threonine (the Pro-Thr box); an irregular region, rich in hydroxyamino acids, of low charge density, and which is predicted to have little secondary structure; and an ordered region of higher charge density which contains a potential active site, and which is predicted to have secondary structure. The Pro-Thr box is conserved almost perfectly in the two enzymes. The irregular regions are 50% conserved, and the conserved sequences include four Asn-Xaa-Ser/Thr sites. The ordered regions appear not to be conserved, but the potential active sites both have the sequence Glu-Xaa7-Asn-Xaa6-Thr; they occur at widely separated sites in the two regions. The order of the regions is reversed in the two enzymes: irregular-Pro-Thr box-ordered in the endoglucanase; ordered-Pro-Thr box-irregular in the exoglucanase. The genes for the two enzymes appear to have arisen by shuffling of two conserved sequences and either one or two other sequences.