Comparison of four in vitro test methods to assess nucleus pulposus replacement device expulsion risk

Background

Nucleus replacement devices (NRDs) are not routinely used in clinic, predominantly due to the risk of device expulsion. Rigorous in vitro testing may enable failure mechanisms to be identified prior to clinical trials; however, current testing standards do not specify a particular expulsion test. Multiple methods have therefore been developed, complicating comparisons between NRD designs. Thus, this study assessed the effectiveness of four previously reported expulsion testing protocols; hula-hoop (Protocol 1), adapted hula-hoop (Protocol 2), eccentric cycling (Protocol 3), and ramp to failure (Protocol 4), applied to two NRDs, one preformed and one in situ curing.

Methods

Nucleus material was removed from 40 bovine tail intervertebral disks. A NRD was inserted posteriorly into each cavity and the disks were subjected to one of four expulsion protocols.

Results

NRD response was dependent on both the NRD design and the loading protocol. Protocol 1 resulted in higher migration and earlier failure rates compared to Protocol 2 in both NRDs. The preformed NRD was more likely to migrate when protocols incorporated rotation. The NRDs had equal migration (60%) and expulsion (60%) rates when using unilateral bending and ramp testing. Combining the results of multiple tests revealed complimentary information regarding the NRD response.

Conclusions

Adapted hula-hoop (Protocol 2) and ramp to failure (Protocol 4), combined with fluoroscopic analysis, revealed complimentary insights regarding migration and failure risk. Therefore, when adopting the surgical approach and animal model used in this study, it is recommended that NRD performance be assessed using both a cyclic and ramp loading protocol.

Search for exotic decays of the Higgs boson to a pair of pseudoscalars in the μμbb and ττbb final states

A search for exotic decays of the Higgs boson (H ) with a mass of 125Ge V to a pair of light pseudoscalars a 1 is performed in final states where one pseudoscalar decays to two b quarks and the other to a pair of muons or τ leptons. A data sample of proton-proton collisions at s = 13 Te V corresponding to an integrated luminosity of 138fb - 1 recorded with the CMS detector is analyzed. No statistically significant excess is observed over the standard model backgrounds. Upper limits are set at 95% confidence level (CL ) on the Higgs boson branching fraction to μ μ b b and to τ τ b b , via a pair of a 1 s. The limits depend on the pseudoscalar mass m a 1 and are observed to be in the range (0.17-3.3) × 10 - 4 and (1.7-7.7) × 10 - 2 in the μ μ b b and τ τ b b final states, respectively. In the framework of models with two Higgs doublets and a complex scalar singlet (2HDM+S), the results of the two final states are combined to determine upper limits on the branching fraction B ( H → a 1 a 1 → ℓ ℓ b b ) at 95% CL , with ℓ being a muon or a τ lepton. For different types of 2HDM+S, upper bounds on the branching fraction B ( H → a 1 a 1 ) are extracted from the combination of the two channels. In most of the Type II 2HDM+S parameter space, B ( H → a 1 a 1 ) values above 0.23 are excluded at 95% CL for m a 1 values between 15 and 60Ge V .

Observation of WWγ Production and Search for Hγ Production in Proton-Proton Collisions at sqrt[s]=13 TeV

The observation of WWγ production in proton-proton collisions at a center-of-mass energy of 13 TeV with an integrated luminosity of 138  fb^{-1} is presented. The observed (expected) significance is 5.6 (5.1) standard deviations. Events are selected by requiring exactly two leptons (one electron and one muon) of opposite charge, moderate missing transverse momentum, and a photon. The measured fiducial cross section for WWγ is 5.9±0.8(stat)±0.8(syst)±0.7(modeling)  fb, in agreement with the next-to-leading order quantum chromodynamics prediction. The analysis is extended with a search for the associated production of the Higgs boson and a photon, which is generated by a coupling of the Higgs boson to light quarks. The result is used to constrain the Higgs boson couplings to light quarks.

Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions

Resorbable Mg and Mg alloys have gained significant interest as promising biomedical materials. However, corrosion of these alloys can lead to premature reduction in their mechanical properties, and therefore their corrosion rate needs to be controlled. The aim of this study is to select an appropriate environment where the effects of coatings on the corrosion rate of the underlying Mg alloy can be discerned and measured in a relatively short time period. The corrosion resistance of uncoated AZ31 alloy in different solutions [Hank's Balanced Salt Solution, 1× phosphate buffered solution (PBS), 4× PBS, 0.9%, 3.5%, and 5 M sodium chloride (NaCl)] was determined by measuring the weight loss over a 2 week period. Upon exposure to physiological solutions, the uncoated AZ31 alloys exhibited a variable weight increase of 0.4 ± 0.4%. 3.5% and 5 M NaCl solutions led to 0.27 and 9.7 mm/year corrosion rates, respectively, where the compositions of corrosion products from AZ31 in all saline solutions were similar. However, the corrosion of the AZ31 alloy when coated by electrochemical oxidation with two phosphate coatings, one containing fluorine (PF) and another containing both fluorine and silica (PFS), showed 0.3 and 0.25 mm/year corrosion rates, respectively. This is more than 30 times lower than that of the uncoated alloy (7.8 mm/year), making them promising candidates for corrosion protection in severe corrosive environments. Cross-sections of the samples showed that the coatings protected the alloy from corrosion by preventing access of saline to the alloy surface, and this was further reinforced by corrosion products from both the alloy and the coatings forming an additional barrier. The information in this paper provides a methodology for evaluating the effects of coatings on the rate of corrosion of magnesium alloys.

New Structures in the J/ψJ/ψ Mass Spectrum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search is reported for near-threshold structures in the J/ψJ/ψ invariant mass spectrum produced in proton-proton collisions at sqrt[s]=13  TeV from data collected by the CMS experiment, corresponding to an integrated luminosity of 135  fb^{-1}. Three structures are found, and a model with quantum interference among these structures provides a good description of the data. A new structure is observed with a local significance above 5 standard deviations at a mass of 6638_{-38}^{+43}(stat)_{-31}^{+16}(syst)  MeV. Another structure with even higher significance is found at a mass of 6847_{-28}^{+44}(stat)_{-20}^{+48}(syst)  MeV, which is consistent with the X(6900) resonance reported by the LHCb experiment and confirmed by the ATLAS experiment. Evidence for another new structure, with a local significance of 4.7 standard deviations, is found at a mass of 7134_{-25}^{+48}(stat)_{-15}^{+41}(syst)  MeV. Results are also reported for a model without interference, which does not fit the data as well and shows mass shifts up to 150 MeV relative to the model with interference.

The role of the nucleus pulposus in intervertebral disc recovery: Towards improved specifications for nucleus replacement devices

Nucleus replacement devices (NRDs) have potential to treat degenerated or herniated intervertebral discs (IVDs). However, IVD height loss is a post-treatment complication. IVD height recovery involves the nucleus pulposus (NP), but the mechanism of this in response to physiological loads is not fully elucidated. This study aimed to characterise the non-linear recovery behaviour of the IVD in intact, post-nuclectomy, and post-NRD treatment states, under physiological loading. 36 bovine IVDs (12 intact, 12 post-nuclectomy, 12 post-treatment) underwent creep-recovery protocols simulating Sitting, Walking or Running, followed by 12 h of recovery. A rheological model decoupled the fluid-independent (elastic, fast) and fluid-dependent (slow) recovery phases. In post-nuclectomy and post-treatment groups, nuclectomy efficiency (ratio of NP removed to remaining NP) was quantified following post-test sectioning. Relative to intact, post-nuclectomy recovery significantly decreased in Sitting (-0.3 ± 0.4 mm, p < 0.05) and Walking (-0.6 ± 0.3 mm, p < 0.001) coupled with significant decreases to the slow response (p < 0.05). Post-nuclectomy, the fast and slow responses negatively correlated with nuclectomy efficiency (p < 0.05). In all protocols, the post-treatment group performed significantly worse in recovery (-0.5 ± 0.3 mm, p < 0.01) and the slow response (p < 0.05). Results suggest the NP mainly facilitates slow-phase recovery, linearly dependent on the amount of NP present. Failure of this NRD to recover is attributed to poor fluid imbibition. Additionally, unconfined NRD performance cannot be extrapolated to the in vitro response. This knowledge informs NRD design criteria to provide high osmotic pressure, and encourages testing standards to incorporate long-term recovery protocols.

Search for Scalar Leptoquarks Produced via τ-Lepton-Quark Scattering in pp Collisions at sqrt[s]=13 TeV

The first search for scalar leptoquarks produced in τ-lepton-quark collisions is presented. It is based on a set of proton-proton collision data recorded with the CMS detector at the LHC at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138  fb^{-1}. The reconstructed final state consists of a jet, significant missing transverse momentum, and a τ lepton reconstructed through its hadronic or leptonic decays. Limits are set on the product of the leptoquark production cross section and branching fraction and interpreted as exclusions in the plane of the leptoquark mass and the leptoquark-τ-quark coupling strength.

Search for Inelastic Dark Matter in Events with Two Displaced Muons and Missing Transverse Momentum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for dark matter in events with a displaced nonresonant muon pair and missing transverse momentum is presented. The analysis is performed using an integrated luminosity of 138  fb^{-1} of proton-proton (pp) collision data at a center-of-mass energy of 13 TeV produced by the LHC in 2016-2018. No significant excess over the predicted backgrounds is observed. Upper limits are set on the product of the inelastic dark matter production cross section σ(pp→A^{'}→χ_{1}χ_{2}) and the decay branching fraction B(χ_{2}→χ_{1}μ^{+}μ^{-}), where A^{'} is a dark photon and χ_{1} and χ_{2} are states in the dark sector with near mass degeneracy. This is the first dedicated collider search for inelastic dark matter.

Luminosity determination using Z boson production at the CMS experiment

The measurement of Z boson production is presented as a method to determine the integrated luminosity of CMS data sets. The analysis uses proton-proton collision data, recorded by the CMS experiment at the CERN LHC in 2017 at a center-of-mass energy of 13Te V . Events with Z bosons decaying into a pair of muons are selected. The total number of Z bosons produced in a fiducial volume is determined, together with the identification efficiencies and correlations from the same data set, in small intervals of 20pb - 1 of integrated luminosity, thus facilitating the efficiency and rate measurement as a function of time and instantaneous luminosity. Using the ratio of the efficiency-corrected numbers of Z bosons, the precisely measured integrated luminosity of one data set is used to determine the luminosity of another. For the first time, a full quantitative uncertainty analysis of the use of Z  bosons for the integrated luminosity measurement is performed. The uncertainty in the extrapolation between two data sets, recorded in 2017 at low and high instantaneous luminosity, is less than 0.5%. We show that the Z boson rate measurement constitutes a precise method, complementary to traditional methods, with the potential to improve the measurement of the integrated luminosity.

Measurement of the production cross section for a W boson in association with a charm quark in proton-proton collisions at s=13TeV

The strange quark content of the proton is probed through the measurement of the production cross section for a W boson and a charm (c) quark in proton-proton collisions at a center-of-mass energy of 13Te V . The analysis uses a data sample corresponding to a total integrated luminosity of 138fb - 1 collected with the CMS detector at the LHC. The W bosons are identified through their leptonic decays to an electron or a muon, and a neutrino. Charm jets are tagged using the presence of a muon or a secondary vertex inside the jet. The W + c production cross section and the cross section ratio R c ± = σ ( W + + c ¯ ) / σ ( W - + c ) are measured inclusively and differentially as functions of the transverse momentum and the pseudorapidity of the lepton originating from the W boson decay. The precision of the measurements is improved with respect to previous studies, reaching 1% in R c ± = 0.950 ± 0.005 (stat) ± 0.010 (syst) . The measurements are compared with theoretical predictions up to next-to-next-to-leading order in perturbative quantum chromodynamics.

Probing Small Bjorken-x Nuclear Gluonic Structure via Coherent J/ψ Photoproduction in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

Quasireal photons exchanged in relativistic heavy ion interactions are powerful probes of the gluonic structure of nuclei. The coherent J/ψ photoproduction cross section in ultraperipheral lead-lead collisions is measured as a function of photon-nucleus center-of-mass energies per nucleon (W_{γN}^{Pb}) over a wide range of 40 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Measurement of the top quark mass using a profile likelihood approach with the lepton + jets final states in proton-proton collisions at s=13TeV

The mass of the top quark is measured in 36.3fb - 1 of LHC proton-proton collision data collected with the CMS detector at s = 13 Te V . The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77 ± 0.37 Ge V . This approach significantly improves the precision over previous measurements.

A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at s=13TeV

A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at s = 13 Te V by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb - 1 . The 95% confidence level upper limit set on the branching fraction of the 125Ge V Higgs boson to invisible particles, B ( H → inv ) , is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B ( H → inv ) searches carried out at s = 7 , 8, and 13Te V in complementary production modes. The combined upper limit at 95% confidence level on B ( H → inv ) is 0.15 (0.08 expected).

Observation of τ Lepton Pair Production in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

We present an observation of photon-photon production of τ lepton pairs in ultraperipheral lead-lead collisions. The measurement is based on a data sample with an integrated luminosity of 404  μb^{-1} collected by the CMS experiment at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=5.02  TeV. The γγ→τ^{+}τ^{-} process is observed for τ^{+}τ^{-} events with a muon and three charged hadrons in the final state. The measured fiducial cross section is σ(γγ→τ^{+}τ^{-})=4.8±0.6(stat)±0.5(syst)  μb, where the second (third) term corresponds to the statistical (systematic) uncertainty in σ(γγ→τ^{+}τ^{-}) in agreement with leading-order QED predictions. Using σ(γγ→τ^{+}τ^{-}), we estimate a model-dependent value of the anomalous magnetic moment of the τ lepton of a_{τ}=0.001_{-0.089}^{+0.055}.

Quantifying internal intervertebral disc strains to assess nucleus replacement device designs: a digital volume correlation and ultra-high-resolution MRI study

Introduction: Nucleus replacement has been proposed as a treatment to restore biomechanics and relieve pain in degenerate intervertebral discs (IVDs). Multiple nucleus replacement devices (NRDs) have been developed, however, none are currently used routinely in clinic. A better understanding of the interactions between NRDs and surrounding tissues may provide insight into the causes of implant failure and provide target properties for future NRD designs. The aim of this study was to non-invasively quantify 3D strains within the IVD through three stages of nucleus replacement surgery: intact, post-nuclectomy, and post-treatment. Methods: Digital volume correlation (DVC) combined with 9.4T MRI was used to measure strains in seven human cadaveric specimens (42 ± 18 years) when axially compressed to 1 kN. Nucleus material was removed from each specimen creating a cavity that was filled with a hydrogel-based NRD. Results: Nucleus removal led to loss of disc height (12.6 ± 4.4%, p = 0.004) which was restored post-treatment (within 5.3 ± 3.1% of the intact state, p > 0.05). Nuclectomy led to increased circumferential strains in the lateral annulus region compared to the intact state (-4.0 ± 3.4% vs. 1.7 ± 6.0%, p = 0.013), and increased maximum shear strains in the posterior annulus region (14.6 ± 1.7% vs. 19.4 ± 2.6%, p = 0.021). In both cases, the NRD was able to restore these strain values to their intact levels (p ≥ 0.192). Discussion: The ability of the NRD to restore IVD biomechanics and some strain types to intact state levels supports nucleus replacement surgery as a viable treatment option. The DVC-MRI method used in the present study could serve as a useful tool to assess future NRD designs to help improve performance in future clinical trials.

Proton vs. Photons for Breast Cancer Patients with Immediate, Implant-Based Reconstruction Receiving Postmastectomy Radiotherapy: A Multicenter Pooled Analysis

PURPOSE/OBJECTIVE(S)

Proton therapy improves postmastectomy radiotherapy (PMRT) normal tissue sparing compared with photon techniques. However, little is understood about its effect on reconstruction outcomes. The primary objective was to evaluate complication rates in breast cancer patients treated with proton (PRO) versus photon (PHO) PMRT following immediate, implant-based breast reconstruction.

MATERIALS/METHODS

Consecutive patients with breast cancer who underwent mastectomy and immediate reconstruction with a tissue expander (TE) or permanent implant (PI) and PRO or PHO PMRT between 2011 and 2022 were included from two institutions. Complication rate was defined as the sum of reconstruction failure (explantation without replacement), unplanned prosthesis exchange, and other unplanned revisional surgery. Each complication type was analyzed as an independent endpoint.

RESULTS

Among 733 patients, median follow-up was 4.4 years; 36.5% (267) were treated with PRO and 63.5% (466) with PHO. There was no difference in age, BMI, or comorbidities between the two groups. PRO was more likely to have had, two-stage reconstruction and pre-pectoral implant placement (p<.01). Median dose was 50-50.4 Gy in 25-28 fractions, with only 50 receiving hypofractionation. Bolus was used in all PHO patients. Regional nodes were more likely to be included in PRO (99.6% v. 83.7% PHO, p<.01). Although there was no difference in the use of chest wall boost between groups, the axillary nodes were more frequently boosted in PRO (25.1% vs 2.8% PHO, p<.01). The overall rate of complications at 4 years was 26.7% (95% CI = 23.3-30.5). The 4-year rate of reconstruction failure, unplanned exchange, and other surgery was 8.2% (95% CI = 6.3-10.7), 17.4% (95% CI = 14.6-20.8), and 12.5% (95% CI = 10.1-15.5), respectively. On MVA, PRO did not confer an increased risk of reconstruction complications compared to PHO. Significant risk factors for reconstruction failure included TE-to-autologous approach [HR versus direct-to-implant reference: 4.05 (95% CI = 1.60-10.22)], TE-to-permanent implant approach [HR = 2.06 (95% CI = 1.12-3.79)], chest wall boost [HR = 2.20 (95% CI = 1.21-4.02)], and any lymph node boost [HR = 2.33 (95% CI = 1.10-4.97)]. Compared to direct-to-implant, two-stage reconstruction was also associated with a higher rate of unplanned exchange [HR for TE/PI = 1.49 (95% CI = 1.01-2.20)] and revisional surgery [HR for TE-to-autologous = 3.95 (95% CI = 1.64-9.52)]. Prepectoral implant placement was correlated with reduced risk of revisional surgery, relative to subpectoral placement [HR = 0.42 (95% CI = 0.22-0.81)].

CONCLUSION

This represents the largest combined series to date comparing PRO and PHO PMRT. Despite a higher rate of two-stage reconstruction, nodal irradiation, and nodal boost in PRO, there was no significant difference in the risk of complications between protons and photons. Differences in PRO delivery techniques between institutions and dosimetric details such as skin dose will be presented in person.

Measurement of the Dependence of the Hadron Production Fraction Ratios f_{s}/f_{u} and f_{d}/f_{u} on B Meson Kinematic Variables in Proton-Proton Collisions at sqrt[s]=13 TeV

The dependence of the ratio between the B_{s}^{0} and B^{+} hadron production fractions, f_{s}/f_{u}, on the transverse momentum (p_{T}) and rapidity of the B mesons is studied using the decay channels B_{s}^{0}→J/ψϕ and B^{+}→J/ψK^{+}. The analysis uses a data sample of proton-proton collisions at a center-of-mass energy of 13 TeV, collected by the CMS experiment in 2018 and corresponding to an integrated luminosity of 61.6  fb^{-1}. The f_{s}/f_{u} ratio is observed to depend on the B p_{T} and to be consistent with becoming asymptotically constant at large p_{T}. No rapidity dependence is observed. The ratio of the B^{0} to B^{+} meson production fractions, f_{d}/f_{u}, is also measured, for the first time in proton-proton collisions, using the B^{0}→J/ψK^{*0} decay channel. The result is found to be within 1 standard deviation of unity and independent of p_{T} and rapidity, as expected from isospin invariance.

Search for Exotic Higgs Boson Decays H→AA→4γ with Events Containing Two Merged Diphotons in Proton-Proton Collisions at sqrt[s]=13 TeV

We present the first direct search for exotic Higgs boson decays H→AA, A→γγ in events with two photonlike objects. The hypothetical particle A is a low-mass spin-0 particle decaying promptly to a merged diphoton reconstructed as a single photonlike object. We analyze the data collected by the CMS experiment at sqrt[s]=13  TeV corresponding to an integrated luminosity of 136  fb^{-1}. No excess above the estimated background is found. We set upper limits on the branching fraction B(H→AA→4γ) of (0.9-3.3)×10^{-3} at 95% confidence level for masses of A in the range 0.1-1.2 GeV.

Observation of Same-Sign WW Production from Double Parton Scattering in Proton-Proton Collisions at sqrt[s]=13 TeV

The first observation of the production of W^{±}W^{±} bosons from double parton scattering processes using same-sign electron-muon and dimuon events in proton-proton collisions is reported. The data sample corresponds to an integrated luminosity of 138  fb^{-1} recorded at a center-of-mass energy of 13 TeV using the CMS detector at the CERN LHC. Multivariate discriminants are used to distinguish the signal process from the main backgrounds. A binned maximum likelihood fit is performed to extract the signal cross section. The measured cross section for production of same-sign W bosons decaying leptonically is 80.7±11.2(stat) _{-8.6}^{+9.5}(syst)±12.1(model)  fb, whereas the measured fiducial cross section is 6.28±0.81(stat)±0.69(syst)±0.37(model)  fb. The observed significance of the signal is 6.2 standard deviations above the background-only hypothesis.

Observation of the Rare Decay of the η Meson to Four Muons

A search for the rare η→μ^{+}μ^{-}μ^{+}μ^{-} double-Dalitz decay is performed using a sample of proton-proton collisions, collected by the CMS experiment at the CERN LHC with high-rate muon triggers during 2017 and 2018 and corresponding to an integrated luminosity of 101  fb^{-1}. A signal having a statistical significance well in excess of 5 standard deviations is observed. Using the η→μ^{+}μ^{-} decay as normalization, the branching fraction B(η→μ^{+}μ^{-}μ^{+}μ^{-})=[5.0±0.8(stat)±0.7(syst)±0.7(B_{2μ})]×10^{-9} is measured, where the last term is the uncertainty in the normalization channel branching fraction. This work achieves an improved precision of over 5 orders of magnitude compared to previous results, leading to the first measurement of this branching fraction, which is found to agree with theoretical predictions.

Measurements of jet multiplicity and jet transverse momentum in multijet events in proton-proton collisions at s=13TeV

Multijet events at large transverse momentum (p T ) are measured at s = 13 Te V using data recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 36.3 fb - 1 . The multiplicity of jets with p T > 50 Ge V that are produced in association with a high-p T dijet system is measured in various ranges of the p T of the jet with the highest transverse momentum and as a function of the azimuthal angle difference Δ ϕ 1 , 2 between the two highest p T jets in the dijet system. The differential production cross sections are measured as a function of the transverse momenta of the four highest p T jets. The measurements are compared with leading and next-to-leading order matrix element calculations supplemented with simulations of parton shower, hadronization, and multiparton interactions. In addition, the measurements are compared with next-to-leading order matrix element calculations combined with transverse-momentum dependent parton densities and transverse-momentum dependent parton shower.

Azimuthal correlations in Z +jets events in proton-proton collisions at s=13TeV

The production of Z bosons associated with jets is measured in pp collisions at s = 13 Te V with data recorded with the CMS experiment at the LHC corresponding to an integrated luminosity of 36.3fb - 1 . The multiplicity of jets with transverse momentum p T > 30 Ge V is measured for different regions of the Z boson's p T ( Z ) , from lower than 10Ge V to higher than 100Ge V . The azimuthal correlation Δ ϕ between the Z boson and the leading jet, as well as the correlations between the two leading jets are measured in three regions of p T ( Z ) . The measurements are compared with several predictions at leading and next-to-leading orders, interfaced with parton showers. Predictions based on transverse-momentum dependent parton distributions and corresponding parton showers give a good description of the measurement in the regions where multiple parton interactions and higher jet multiplicities are not important. The effects of multiple parton interactions are shown to be important to correctly describe the measured spectra in the low p T ( Z ) regions.

Search for Higgs Boson Decay to a Charm Quark-Antiquark Pair in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for the standard model Higgs boson decaying to a charm quark-antiquark pair, H→cc[over ¯], produced in association with a leptonically decaying V (W or Z) boson is presented. The search is performed with proton-proton collisions at sqrt[s]=13  TeV collected by the CMS experiment, corresponding to an integrated luminosity of 138  fb^{-1}. Novel charm jet identification and analysis methods using machine learning techniques are employed. The analysis is validated by searching for Z→cc[over ¯] in VZ events, leading to its first observation at a hadron collider with a significance of 5.7 standard deviations. The observed (expected) upper limit on σ(VH)B(H→cc[over ¯]) is 0.94 (0.50_{-0.15}^{+0.22})pb at 95% confidence level (C.L.), corresponding to 14 (7.6_{-2.3}^{+3.4}) times the standard model prediction. For the Higgs-charm Yukawa coupling modifier, κ_{c}, the observed (expected) 95% C.L. interval is 1.1<|κ_{c}|<5.5 (|κ_{c}|<3.4), the most stringent constraint to date.

Azimuthal Correlations within Exclusive Dijets with Large Momentum Transfer in Photon-Lead Collisions

The structure of nucleons is multidimensional and depends on the transverse momenta, spatial geometry, and polarization of the constituent partons. Such a structure can be studied using high-energy photons produced in ultraperipheral heavy-ion collisions. The first measurement of the azimuthal angular correlations of exclusively produced events with two jets in photon-lead interactions at large momentum transfer is presented, a process that is considered to be sensitive to the underlying nuclear gluon polarization. This study uses a data sample of ultraperipheral lead-lead collisions at sqrt[s_{NN}]=5.02  TeV, corresponding to an integrated luminosity of 0.38  nb^{-1}, collected with the CMS experiment at the LHC. The measured second harmonic of the correlation between the sum and difference of the two jet transverse momentum vectors is found to be positive, and rising, as the dijet transverse momentum increases. A well-tuned model that has been successful at describing a wide range of proton scattering data from the HERA experiments fails to describe the observed correlations, suggesting the presence of gluon polarization effects.

Paving the way to better understand the effects of prolonged spaceflight on operational performance and its neural bases

Space exploration objectives will soon move from low Earth orbit to distant destinations like Moon and Mars. The present work provides an up-to-date roadmap that identifies critical research gaps related to human behavior and performance in altered gravity and space. The roadmap summarizes (1) key neurobehavioral challenges associated with spaceflight, (2) the need to consider sex as a biological variable, (3) the use of integrative omics technologies to elucidate mechanisms underlying changes in the brain and behavior, and (4) the importance of understanding the neural representation of gravity throughout the brain and its multisensory processing. We then highlight the need for a variety of target-specific countermeasures, and a personalized administration schedule as two critical strategies for mitigating potentially adverse effects of spaceflight on the central nervous system and performance. We conclude with a summary of key priorities for the roadmaps of current and future space programs and stress the importance of new collaborative strategies across agencies and researchers for fostering an integrative cross- and transdisciplinary approach from cells, molecules to neural circuits and cognitive performance. Finally, we highlight that space research in neurocognitive science goes beyond monitoring and mitigating risks in astronauts but could also have significant benefits for the population on Earth.

Search for Nonresonant Pair Production of Highly Energetic Higgs Bosons Decaying to Bottom Quarks

A search for nonresonant Higgs boson (H) pair production via gluon and vector boson (V) fusion is performed in the four-bottom-quark final state, using proton-proton collision data at 13 TeV corresponding to 138  fb^{-1} collected by the CMS experiment at the LHC. The analysis targets Lorentz-boosted H pairs identified using a graph neural network. It constrains the strengths relative to the standard model of the H self-coupling and the quartic VVHH couplings, κ_{2V}, excluding κ_{2V}=0 for the first time, with a significance of 6.3 standard deviations when other H couplings are fixed to their standard model values.

Search for Higgs Boson and Observation of Z Boson through Their Decay into a Charm Quark-Antiquark Pair in Boosted Topologies in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for the standard model (SM) Higgs boson (H) produced with transverse momentum (p_{T}) greater than 450 GeV and decaying to a charm quark-antiquark (cc[over ¯]) pair is presented. The search is performed using proton-proton collision data collected at sqrt[s]=13  TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138  fb^{-1}. Boosted H→cc[over ¯] decay products are reconstructed as a single large-radius jet and identified using a deep neural network charm tagging technique. The method is validated by measuring the Z→cc[over ¯] decay process, which is observed in association with jets at high p_{T} for the first time with a signal strength of 1.00_{-0.14}^{+0.17}(syst)±0.08(theo)±0.06(stat), defined as the ratio of the observed process rate to the SM expectation. The observed (expected) upper limit on σ(H)B(H→cc[over ¯]) is set at 47 (39) times the SM prediction at 95% confidence level.

Measurements of the Higgs boson production cross section and couplings in the W boson pair decay channel in proton-proton collisions at s=13TeV

Production cross sections of the standard model Higgs boson decaying to a pair of W bosons are measured in proton-proton collisions at a center-of-mass energy of 13Te V . The analysis targets Higgs bosons produced via gluon fusion, vector boson fusion, and in association with a W or Z boson. Candidate events are required to have at least two charged leptons and moderate missing transverse momentum, targeting events with at least one leptonically decaying W boson originating from the Higgs boson. Results are presented in the form of inclusive and differential cross sections in the simplified template cross section framework, as well as couplings of the Higgs boson to vector bosons and fermions. The data set collected by the CMS detector during 2016-2018 is used, corresponding to an integrated luminosity of 138fb - 1 . The signal strength modifier μ , defined as the ratio of the observed production rate in a given decay channel to the standard model expectation, is measured to be μ = 0 . 95 - 0.09 + 0.10 . All results are found to be compatible with the standard model within the uncertainties.

Measurement of the mass dependence of the transverse momentum of lepton pairs in Drell-Yan production in proton-proton collisions at s=13TeV

The double differential cross sections of the Drell-Yan lepton pair (ℓ + ℓ - , dielectron or dimuon) production are measured as functions of the invariant mass m ℓ ℓ , transverse momentum p T ( ℓ ℓ ) , and φ η ∗ . The φ η ∗ observable, derived from angular measurements of the leptons and highly correlated with p T ( ℓ ℓ ) , is used to probe the low-p T ( ℓ ℓ ) region in a complementary way. Dilepton masses up to 1Te V are investigated. Additionally, a measurement is performed requiring at least one jet in the final state. To benefit from partial cancellation of the systematic uncertainty, the ratios of the differential cross sections for various m ℓ ℓ ranges to those in the Z mass peak interval are presented. The collected data correspond to an integrated luminosity of 36.3fb - 1 of proton-proton collisions recorded with the CMS detector at the LHC at a centre-of-mass energy of 13Te V . Measurements are compared with predictions based on perturbative quantum chromodynamics, including soft-gluon resummation.

CMS pythia 8 colour reconnection tunes based on underlying-event data

New sets of parameter tunes for two of the colour reconnection models, quantum chromodynamics-inspired and gluon-move, implemented in the pythia  8 event generator, are obtained based on the default CMS pythia  8 underlying-event tune, CP5. Measurements sensitive to the underlying event performed by the CMS experiment at centre-of-mass energies s = 7 and 13Te V , and by the CDF experiment at 1.96Te V are used to constrain the parameters of colour reconnection models and multiple-parton interactions simultaneously. The new colour reconnection tunes are compared with various measurements at 1.96, 7, 8, and 13Te V including measurements of the underlying-event, strange-particle multiplicities, jet substructure observables, jet shapes, and colour flow in top quark pair (t t ¯ ) events. The new tunes are also used to estimate the uncertainty related to colour reconnection modelling in the top quark mass measurement using the decay products of t t ¯ events in the semileptonic channel at 13Te V .

Probing Heavy Majorana Neutrinos and the Weinberg Operator through Vector Boson Fusion Processes in Proton-Proton Collisions at sqrt[s]=13 TeV

The first search exploiting the vector boson fusion process to probe heavy Majorana neutrinos and the Weinberg operator at the LHC is presented. The search is performed in the same-sign dimuon final state using a proton-proton collision dataset recorded at sqrt[s]=13  TeV, collected with the CMS detector and corresponding to a total integrated luminosity of 138  fb^{-1}. The results are found to agree with the predictions of the standard model. For heavy Majorana neutrinos, constraints on the squared mixing element between the muon and the heavy neutrino are derived in the heavy neutrino mass range 50 GeV-25 TeV; for masses above 650 GeV these are the most stringent constraints from searches at the LHC to date. A first test of the Weinberg operator at colliders provides an observed upper limit at 95% confidence level on the effective μμ Majorana neutrino mass of 10.8 GeV.

Search for light Higgs bosons from supersymmetric cascade decays in pp collisions at s=13TeV

A search is reported for pairs of light Higgs bosons (H 1 ) produced in supersymmetric cascade decays in final states with small missing transverse momentum. A data set of LHC pp collisions collected with the CMS detector at s = 13 TeV and corresponding to an integrated luminosity of 138fb - 1 is used. The search targets events where both H 1 bosons decay into pairs that are reconstructed as large-radius jets using substructure techniques. No evidence is found for an excess of events beyond the background expectations of the standard model (SM). Results from the search are interpreted in the next-to-minimal supersymmetric extension of the SM, where a "singlino" of small mass leads to squark and gluino cascade decays that can predominantly end in a highly Lorentz-boosted singlet-like H 1 and a singlino-like neutralino of small transverse momentum. Upper limits are set on the product of the squark or gluino pair production cross section and the square of the branching fraction of the H 1 in a benchmark model containing almost mass-degenerate gluinos and light-flavour squarks. Under the assumption of an SM-like branching fraction, H 1 bosons with masses in the range 40-120GeV arising from the decays of squarks or gluinos with a mass of 1200-2500GeV are excluded at 95% confidence level.

Measurement of the differential tt¯ production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production (t t ¯ ) events, where the lepton is an electron or muon. The products of the hadronic top quark decay are reconstructed using a single large-radius jet with transverse momentum greater than 400Ge V . The data were collected with the CMS detector at the LHC in proton-proton collisions and correspond to an integrated luminosity of 138fb - 1 . The differential t t ¯ production cross section as a function of the jet mass is unfolded to the particle level and is used to extract the top quark mass. The jet mass scale is calibrated using the hadronic W boson decay within the large-radius jet. The uncertainties in the modelling of the final state radiation are reduced by studying angular correlations in the jet substructure. These developments lead to a significant increase in precision, and a top quark mass of 173.06 ± 0.84 Ge V .

An in vitro comparison of three nucleus pulposus removal techniques for partial intervertebral disc replacement: An ultra-high resolution MRI study

Background

Nuclectomy, also known as nucleotomy, is a percutaneous surgical procedure performed to remove nucleus material from the center of the disc. Multiple techniques have been considered to perform a nuclectomy, however, the advantages and disadvantages of each are not well understood.

Aims

This in vitro biomechanical investigation on human cadaveric specimens aimed to quantitatively compare three nuclectomy techniques performed using an automated shaver, rongeurs, and laser.

Material & Methods

Comparisons were made in terms of mass, volume and location of material removal, changes in disc height, and stiffness. Fifteen vertebra-disc-vertebra lumbar specimens were acquired from six donors (40 ± 13 years) and split into three groups. Before and after nucleotomy axial mechanical tests were performed and T2-weighted 9.4T MRIs were acquired for each specimen.

Results

When using the automated shaver and rongeurs similar volumes of disc material were removed (2.51 ± 1.10% and 2.76 ± 1.39% of the total disc volume, respectively), while considerably less material was removed using the laser (0.12 ± 0.07%). Nuclectomy using the automated shaver and rongeurs significantly reduced the toe-region stiffness (p = 0.036), while the reduction in the linear region stiffness was significant only for the rongeurs group (p = 0.011). Post-nuclectomy, 60% of the rongeurs group specimens showed changes in the endplate profile while 40% from the laser group showed subchondral marrow changes.

Discussion

From the MRIs, homogeneous cavities were seen in the center of the disc when using the automated shaver. When using rongeurs, material was removed non-homogeneously both from the nucleus and annulus regions. Laser ablation formed small and localized cavities suggesting that the technique is not suitable to remove large volumes of material unless it is developed and optimized for this application.

Conclusion

The results demonstrate that both rongeurs and automated shavers can be used to remove large volumes of NP material but the reduced risk of collateral damage to surrounding tissues suggests that the automated shaver may be more suitable.

Magnetic hydrogel particles improve nanopore sequencing of SARS-CoV-2 and other respiratory viruses

Presented here is a magnetic hydrogel particle enabled workflow for capturing and concentrating SARS-CoV-2 from diagnostic remnant swab samples that significantly improves sequencing results using the Oxford Nanopore Technologies MinION sequencing platform. Our approach utilizes a novel affinity-based magnetic hydrogel particle, circumventing low input sample volumes and allowing for both rapid manual and automated high throughput workflows that are compatible with Nanopore sequencing. This approach enhances standard RNA extraction protocols, providing up to 40 × improvements in viral mapped reads, and improves sequencing coverage by 20-80% from lower titer diagnostic remnant samples. Furthermore, we demonstrate that this approach works for contrived influenza virus and respiratory syncytial virus samples, suggesting that it can be used to identify and improve sequencing results of multiple viruses in VTM samples. These methods can be performed manually or on a KingFisher automation platform.

Experimental testing of a prototype cantilevered liquid-nitrogen-cooled silicon mirror

This report presents testing of a prototype cantilevered liquid-nitrogen-cooled silicon mirror. This mirror was designed to be the first mirror for the new soft X-ray beamlines to be built as part of the Advanced Light Source Upgrade. Test activities focused on fracture, heat transfer, modal response and distortion, and indicated that the mirror functions as intended.

Measurements of the associated production of a W boson and a charm quark in proton-proton collisions at s = 8 TeV

Measurements of the associated production of a W boson and a charm ( c ) quark in proton-proton collisions at a centre-of-mass energy of 8 TeV are reported. The analysis uses a data sample corresponding to a total integrated luminosity of 19.7 fb - 1 collected by the CMS detector at the LHC. The W bosons are identified through their leptonic decays to an electron or a muon, and a neutrino. Charm quark jets are selected using distinctive signatures of charm hadron decays. The product of the cross section and branching fraction σ ( pp → W + c + X ) B ( W → ℓ ν ) , where ℓ = e or μ , and the cross section ratio σ ( pp → W + + c ¯ + X ) / σ ( pp → W - + c + X ) are measured in a fiducial volume and differentially as functions of the pseudorapidity and of the transverse momentum of the lepton from the W boson decay. The results are compared with theoretical predictions. The impact of these measurements on the determination of the strange quark distribution is assessed.

Search for Higgs Boson Pair Production in the Four b Quark Final State in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for pairs of Higgs bosons produced via gluon and vector boson fusion is presented, focusing on the four b quark final state. The data sample consists of proton-proton collisions at a center-of-mass energy of 13 TeV, collected with the CMS detector at the LHC, and corresponds to an integrated luminosity of 138  fb^{-1}. No deviation from the background-only hypothesis is observed. A 95% confidence level upper limit on the Higgs boson pair production cross section is observed at 3.9 times the standard model prediction for an expected value of 7.8. Constraints are also set on the modifiers of the Higgs field self-coupling, κ_{λ}, and of the coupling of two Higgs bosons to two vector bosons, κ_{2 V}. The observed (expected) allowed intervals at the 95% confidence level are -2.3<κ_{λ}<9.4 (-5.0<κ_{λ}<12.0) and -0.1<κ_{2 V}<2.2 (-0.4<κ_{2 V}<2.5). These are the most stringent observed constraints to date on the HH production cross section and on the κ_{2 V } coupling.

Search for Flavor-Changing Neutral Current Interactions of the Top Quark and Higgs Boson in Final States with Two Photons in Proton-Proton Collisions at sqrt[s]=13 TeV

Proton-proton interactions resulting in final states with two photons are studied in a search for the signature of flavor-changing neutral current interactions of top quarks (t) and Higgs bosons (H). The analysis is based on data collected at a center-of-mass energy of 13 TeV with the CMS detector at the LHC, corresponding to an integrated luminosity of 137  fb^{-1}. No significant excess above the background prediction is observed. Upper limits on the branching fractions (B) of the top quark decaying to a Higgs boson and an up (u) or charm (c) quark are derived through a binned fit to the diphoton invariant mass spectrum. The observed (expected) 95% confidence level upper limits are found to be 0.019% (0.031%) for B(t→Hu) and 0.073% (0.051%) for B(t→Hc). These are the strictest upper limits yet determined.

Search for Resonances Decaying to Three W Bosons in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for resonances decaying into a W boson and a radion, where the radion decays into two W bosons, is presented. The data analyzed correspond to an integrated luminosity of 138  fb^{-1} recorded in proton-proton collisions with the CMS detector at sqrt[s]=13  TeV. One isolated charged lepton is required, together with missing transverse momentum and one or two massive large-radius jets, containing the decay products of either two or one W bosons, respectively. No excess over the background estimation is observed. The results are combined with those from a complementary channel with an all-hadronic final state, described in an accompanying paper. Limits are set on parameters of an extended warped extra-dimensional model. These searches are the first of their kind at the LHC.

Probing Charm Quark Dynamics via Multiparticle Correlations in Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

Multiparticle azimuthal correlations of prompt D^{0} mesons are measured in Pb-Pb collisions at a nucleon-nucleon center-of-mass energy of sqrt[s_{NN}]=5.02  TeV. For the first time, a four-particle cumulant method is used to extract the second Fourier coefficient of the azimuthal distribution (v_{2}) of D^{0} mesons as a function of event centrality and the D^{0} transverse momentum. The ratios of the four-particle v_{2} values to previously measured two-particle cumulant results provide direct experimental access to event-by-event fluctuations of charm quark azimuthal anisotropies. These ratios are also found to be comparable to those of inclusive charged particles in the event. However, hints of deviations are seen in the most central and peripheral collisions. To investigate the origin of flow fluctuations in the charm sector, these measurements are compared to a model implementing fluctuations of charm quark energy loss via collisional or radiative processes in the quark-gluon plasma. These models cannot quantitatively describe the data over the full transverse momentum and centrality ranges, although the calculations with collisional energy loss provide a better description of the data.

A portrait of the Higgs boson by the CMS experiment ten years after the discovery

In July 2012, the ATLAS and CMS collaborations at the CERN Large Hadron Collider announced the observation of a Higgs boson at a mass of around 125 gigaelectronvolts. Ten years later, and with the data corresponding to the production of a 30-times larger number of Higgs bosons, we have learnt much more about the properties of the Higgs boson. The CMS experiment has observed the Higgs boson in numerous fermionic and bosonic decay channels, established its spin-parity quantum numbers, determined its mass and measured its production cross-sections in various modes. Here the CMS Collaboration reports the most up-to-date combination of results on the properties of the Higgs boson, including the most stringent limit on the cross-section for the production of a pair of Higgs bosons, on the basis of data from proton-proton collisions at a centre-of-mass energy of 13 teraelectronvolts. Within the uncertainties, all these observations are compatible with the predictions of the standard model of elementary particle physics. Much evidence points to the fact that the standard model is a low-energy approximation of a more comprehensive theory. Several of the standard model issues originate in the sector of Higgs boson physics. An order of magnitude larger number of Higgs bosons, expected to be examined over the next 15 years, will help deepen our understanding of this crucial sector.