1
|
Sb-Doped Biphasic P2/O3-Type Mn-Rich Layered Oxide Cathode Material for High-Performance Sodium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38498683 DOI: 10.1021/acsami.3c15667] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/20/2024]
Abstract
Mn-rich P2-type layered oxide cathode materials suffer from severe capacity loss caused by detrimental phase transition and transition metal dissolution, making their implementation difficult in large-scale sodium-ion battery applications. Herein, we introduced a high-valent Sb5+ substitution, leading to a biphasic P2/O3 cathode that suppresses the P2-O2 phase transformation in the high-voltage condition attributed to the stronger Sb-O covalency that introduces extra electrons to the O atom, reducing oxygen loss from the lattices and improving structural stability, as confirmed by first-principle calculations. Besides, the enhanced Na+ diffusion kinetics and thermodynamics in the modified sample are associated with the enlarged lattice parameters. As a result, the proposed cathode delivers a discharge capacity of 142.6 mAh g-1 at 0.1C between 1.5 and 4.3 V and excellent performance at a high mass loading of 8 mg cm3 with a specific capacity of 131 mAh g-1 at 0.2C. Furthermore, it also possesses remarkable rate capability (90.3 mAh g-1 at 5C), specifying its practicality in high-energy-density sodium-ion batteries. Hence, this work provides insights into incorporating high-valent dopants for high-performance Mn-rich cathodes.
Collapse
|
2
|
Dicarboxylic Acid-Assisted Surface Oxide Removal and Passivation of Indium Antimonide Colloidal Quantum Dots for Short-Wave Infrared Photodetectors. Angew Chem Int Ed Engl 2024; 63:e202316733. [PMID: 38170453 DOI: 10.1002/anie.202316733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2023] [Revised: 12/23/2023] [Accepted: 01/03/2024] [Indexed: 01/05/2024]
Abstract
Heavy-metal-free III-V colloidal quantum dots (CQDs) are promising materials for solution-processed short-wave infrared (SWIR) photodetectors. Recent progress in the synthesis of indium antimonide (InSb) CQDs with sizes smaller than the Bohr exciton radius enables quantum-size effect tuning of the band gap. However, it has been challenging to achieve uniform InSb CQDs with band gaps below 0.9 eV, as well as to control the surface chemistry of these large-diameter CQDs. This has, to date, limited the development of InSb CQD photodetectors that are sensitive to ≥ ${\ge }$ 1400 nm light. Here we adopt solvent engineering to facilitate a diffusion-limited growth regime, leading to uniform CQDs with a band gap of 0.89 eV. We then develop a CQD surface reconstruction strategy that employs a dicarboxylic acid to selectively remove the native In/Sb oxides, and enables a carboxylate-halide co-passivation with the subsequent halide ligand exchange. We find that this strategy reduces trap density by half compared to controls, and enables electronic coupling among CQDs. Photodetectors made using the tailored CQDs achieve an external quantum efficiency of 25 % at 1400 nm, the highest among III-V CQD photodetectors in this spectral region.
Collapse
|
3
|
Next-Generation Tags for Fluorine Nuclear Magnetic Resonance: Designing Amplification of Chemical Shift Sensitivity. J Am Chem Soc 2024; 146:3052-3064. [PMID: 38279916 DOI: 10.1021/jacs.3c09730] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2024]
Abstract
Fluorine NMR is a highly sensitive technique for delineating the conformational states of biomolecules and has shown great utility in drug screening and in understanding protein function. Current fluorinated protein tags leverage the intrinsic chemical shift sensitivity of the 19F nucleus to detect subtle changes in protein conformation and topology. This chemical shift sensitivity can be amplified by embedding the fluorine or trifluoromethyl reporter within a pyridone. Due to their polarizability and rapid tautomerization, pyridones exhibit a greater range of electron delocalization and correspondingly greater 19F NMR chemical shift dispersion. To assess the chemical shift sensitivity of these tautomeric probes to the local environment, 19F NMR spectra of all possible monofluorinated and trifluoromethyl-tagged versions of 2-pyridone were recorded in methanol/water mixtures ranging from 100% methanol to 100% water. 4-Fluoro-2-pyridone and 6-(trifluoromethyl)-2-pyridone (6-TFP) displayed the greatest sensitivity of the monofluorinated and trifluoromethylated pyridones, exceeding that of known conventional CF3 reporters. To evaluate the utility of tautomeric pyridone tags for 19F NMR of biomolecules, the alpha subunit of the stimulatory G protein (Gsα) and human serum albumin (HSA) were each labeled with a thiol-reactive derivative of 6-TFP and the spectra were recorded as a function of various adjuvants and drugs. The tautomeric tag outperformed the conventional tag, 2-bromo-N-(4-(trifluoromethyl)phenyl)acetamide through the improved resolution of several functional states.
Collapse
|
4
|
Halide-Driven Synthetic Control of InSb Colloidal Quantum Dots Enables Short-Wave Infrared Photodetectors. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2306147. [PMID: 37734861 DOI: 10.1002/adma.202306147] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Revised: 09/13/2023] [Indexed: 09/23/2023]
Abstract
In the III-V family of colloidal quantum dot (CQD) semiconductors, InSb promises access to a wider range of infrared wavelengths compared to many light-sensing material candidates. However, achieving the necessary size, size-dispersity, and optical properties has been challenging. Here the synthetic challenges associated with InSb CQDs are investigated and it is found that uncontrolled reduction of the antimony precursor hampers the controlled growth of CQDs. To overcome this, a synthetic strategy that combines nonpyrophoric precursors with zinc halide additives is developed. The experimental and computational studies show that zinc halide additives decelerate the reduction of the antimony precursor, facilitating the growth of more uniformly sized CQDs. It is also found that the halide choice provides additional control over the strength of this effect. The resultant CQDs exhibit well-defined excitonic transitions in spectral range of 1.26-0.98 eV, along with strong photoluminescence. By implementing a postsynthesis ligand exchange, colloidally stable inks enabling the fabrication of high-quality CQD films are achieved. The first demonstration of InSb CQD photodetectors is presented reaching 75% external quantum efficiency (QE) at 1200 nm, to the knowledge the highest short-wave infrared (SWIR) QE reported among heavy-metal-free infrared CQD-based devices.
Collapse
|
5
|
Homomeric chains of intermolecular bonds scaffold octahedral germanium perovskites. Nature 2023; 620:328-335. [PMID: 37438526 DOI: 10.1038/s41586-023-06209-y] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2022] [Accepted: 05/12/2023] [Indexed: 07/14/2023]
Abstract
Perovskites with low ionic radii metal centres (for example, Ge perovskites) experience both geometrical constraints and a gain in electronic energy through distortion; for these reasons, synthetic attempts do not lead to octahedral [GeI6] perovskites, but rather, these crystallize into polar non-perovskite structures1-6. Here, inspired by the principles of supramolecular synthons7,8, we report the assembly of an organic scaffold within perovskite structures with the goal of influencing the geometric arrangement and electronic configuration of the crystal, resulting in the suppression of the lone pair expression of Ge and templating the symmetric octahedra. We find that, to produce extended homomeric non-covalent bonding, the organic motif needs to possess self-complementary properties implemented using distinct donor and acceptor sites. Compared with the non-perovskite structure, the resulting [GeI6]4- octahedra exhibit a direct bandgap with significant redshift (more than 0.5 eV, measured experimentally), 10 times lower octahedral distortion (inferred from measured single-crystal X-ray diffraction data) and 10 times higher electron and hole mobility (estimated by density functional theory). We show that the principle of this design is not limited to two-dimensional Ge perovskites; we implement it in the case of copper perovskite (also a low-radius metal centre), and we extend it to quasi-two-dimensional systems. We report photodiodes with Ge perovskites that outperform their non-octahedral and lead analogues. The construction of secondary sublattices that interlock with an inorganic framework within a crystal offers a new synthetic tool for templating hybrid lattices with controlled distortion and orbital arrangement, overcoming limitations in conventional perovskites.
Collapse
|
6
|
Investigating Metal-Tributyl Phosphate Complexes during Supercritical Fluid Extraction of the NdFeB Magnet Using Density Functional Theory and X-ray Absorption Spectroscopy. Inorg Chem 2023; 62:7689-7702. [PMID: 37154778 DOI: 10.1021/acs.inorgchem.2c04508] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
Supercritical fluid extraction (SCFE) is gaining significant interest as a green technology for the recycling of end-of-life waste electrical and electronic equipment (WEEE). Neodymium iron boron (NdFeB) magnets, which contain large quantities of critical rare-earth elements such as neodymium, praseodymium, and dysprosium, are widely used in wind turbines and electric/hybrid vehicles. Hence, they are considered a promising secondary resource for these elements when they reach their end-of-life. Previously, the SCFE process was developed for recycling WEEE, including NdFeB; however, the process mechanism remains unexplored. Here, density functional theory, followed by extended X-ray absorption fine structure and X-ray absorption near-edge structure analyses, are utilized to determine the structural coordination and interatomic interactions of complexes formed during the SCFE of the NdFeB magnet. The results indicate that Fe(II), Fe(III), and Nd(III) form Fe(NO3)2(TBP)2, Fe(NO3)3(TBP)2, and Nd(NO3)3(TBP)3 complexes, respectively. This theory-guided investigation elucidates the complexation chemistry and mechanism during the SCFE process by rigorously determining the structural models.
Collapse
|
7
|
Electroreduction of Carbon Dioxide to Acetate using Heterogenized Hydrophilic Manganese Porphyrins. Chemistry 2023; 29:e202203977. [PMID: 36576084 DOI: 10.1002/chem.202203977] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2022] [Accepted: 12/28/2022] [Indexed: 12/29/2022]
Abstract
The electrochemical reduction of carbon dioxide (CO2 ) to value-added chemicals is a promising strategy to mitigate climate change. Metalloporphyrins have been used as a promising class of stable and tunable catalysts for the electrochemical reduction reaction of CO2 (CO2 RR) but have been primarily restricted to single-carbon reduction products. Here, we utilize functionalized earth-abundant manganese tetraphenylporphyrin-based (Mn-TPP) molecular electrocatalysts that have been immobilized via electrografting onto a glassy carbon electrode (GCE) to convert CO2 with overall 94 % Faradaic efficiencies, with 62 % being converted to acetate. Tuning of Mn-TPP with electron-withdrawing sulfonate groups (Mn-TPPS) introduced mechanistic changes arising from the electrostatic interaction between the sulfonate groups and water molecules, resulting in better surface coverage, which facilitated higher conversion rates than the non-functionalized Mn-TPP. For Mn-TPP only carbon monoxide and formate were detected as CO2 reduction products. Density-functional theory (DFT) calculations confirm that the additional sulfonate groups could alter the C-C coupling pathway from *CO→*COH→*COH-CO to *CO→*CO-CO→*COH-CO, reducing the free energy barrier of C-C coupling in the case of Mn-TPPS. This opens a new approach to designing metalloporphyrin catalysts for two carbon products in CO2 RR.
Collapse
|
8
|
The Open Catalyst 2022 (OC22) Dataset and Challenges for Oxide Electrocatalysts. ACS Catal 2023. [DOI: 10.1021/acscatal.2c05426] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/18/2023]
|
9
|
Asymmetric Interfacet Adatom Migration as a Mode of Anisotropic Nanocrystal Growth. J Am Chem Soc 2022; 144:19417-19429. [PMID: 36226909 DOI: 10.1021/jacs.2c07423] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Crystals are known to grow nonclassically or via four classical modes (the layer-by-layer, dislocation-driven, dendritic, and normal modes, which generally involve minimal interfacet surface diffusion). The field of nanoscience considers this framework to interpret how nanocrystals grow; yet, the growth of many anisotropic nanocrystals remains enigmatic, suggesting that the framework may be incomplete. Here, we study the solution-phase growth of pentatwinned Au nanorods without Br, Ag, or surfactants. Lower supersaturation conditions favored anisotropic growth, which appeared at variance with the known modes. Temporal electron microscopy revealed kinetically limited adatom funneling, as adatoms diffused asymmetrically along the vicinal facets (situated inbetween the {100} side-facets and {111} end-facets) of our nanorods. These vicinal facets were perpetuated throughout the synthesis and, especially at lower supersaturation, facilitated {100}-to-vicinal-to-{111} adatom diffusion. We derived a growth model from classical theory in view of our findings, which showed that our experimental growth kinetics were consistent with nanorods growing via two modes simultaneously: radial growth occurred via the layer-by-layer mode on {100} side-facets, whereas the asymmetric interfacet diffusion of adatoms to {111} end-facets mediated longitudinal growth. Thus, shape anisotropy was not driven by modulating the relative rates of monomer deposition on different facets, as conventionally thought, but rather by modulating the relative rates of monomer integration via interfacet diffusion. This work shows how controlling supersaturation, a thermodynamic parameter, can uncover distinct kinetic phenomena on nanocrystals, such as asymmetric interfacet surface diffusion and a fundamental growth mode for which monomer deposition and integration occur on different facets.
Collapse
|
10
|
Fast Near-Infrared Photodetection Using III-V Colloidal Quantum Dots. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2203039. [PMID: 35767306 DOI: 10.1002/adma.202203039] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/04/2022] [Revised: 06/17/2022] [Indexed: 06/15/2023]
Abstract
Colloidal quantum dots (CQDs) are promising materials for infrared (IR) light detection due to their tunable bandgap and their solution processing; however, to date, the time response of CQD IR photodiodes is inferior to that provided by Si and InGaAs. It is reasoned that the high permittivity of II-VI CQDs leads to slow charge extraction due to screening and capacitance, whereas III-Vs-if their surface chemistry can be mastered-offer a low permittivity and thus increase potential for high-speed operation. In initial studies, it is found that the covalent character in indium arsenide (InAs) leads to imbalanced charge transport, the result of unpassivated surfaces, and uncontrolled heavy doping. Surface management using amphoteric ligand coordination is reported, and it is found that the approach addresses simultaneously the In and As surface dangling bonds. The new InAs CQD solids combine high mobility (0.04 cm2 V-1 s-1 ) with a 4× reduction in permittivity compared to PbS CQDs. The resulting photodiodes achieve a response time faster than 2 ns-the fastest photodiode among previously reported CQD photodiodes-combined with an external quantum efficiency (EQE) of 30% at 940 nm.
Collapse
|
11
|
|
12
|
High-Throughput Evaluation of Emission and Structure in Reduced-Dimensional Perovskites. ACS CENTRAL SCIENCE 2022; 8:571-580. [PMID: 35647281 PMCID: PMC9136976 DOI: 10.1021/acscentsci.2c00041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/15/2022] [Indexed: 06/15/2023]
Abstract
High-throughput experimentation (HTE) seeks to accelerate the exploration of materials space by uniting robotics, combinatorial methods, and parallel processing. HTE is particularly relevant to metal halide perovskites (MHPs), a diverse class of optoelectronic materials with a large chemical space. Here we develop an HTE workflow to synthesize and characterize light-emitting MHP single crystals, allowing us to generate the first reported data set of experimentally derived photoluminescence spectra for low-dimensional MHPs. We leverage the accelerated workflow to optimize the synthesis and emission of a new MHP, methoxy-phenethylammonium lead iodide ((4-MeO-PEAI)2-PbI2). We then synthesize 16 000 MHP single crystals and measure their photoluminescence to study the effects of synthesis parameters and compositional engineering on the emission intensity of 54 distinct MHPs: we achieve an acceleration factor of more than 100 times over previously reported HTE MHP synthesis and characterization methods. Using insights derived from this analysis, we screen an existing database for new, potentially emissive MHPs. On the basis of the Tanimoto similarity of the bright available emitters, we present our top candidates for future exploration. As a proof of concept, we use one of these (3,4-difluorophenylmethanamine) to synthesize an MHP which we find has a photoluminescence quantum yield of 10%.
Collapse
|
13
|
In Situ Inorganic Ligand Replenishment Enables Bandgap Stability in Mixed-Halide Perovskite Quantum Dot Solids. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2200854. [PMID: 35297516 DOI: 10.1002/adma.202200854] [Citation(s) in RCA: 48] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/26/2022] [Revised: 03/07/2022] [Indexed: 06/14/2023]
Abstract
Instability in mixed-halide perovskites (MHPs) is a key issue limiting perovskite solar cells and light-emitting diodes (LEDs). One form of instability arises during the processing of MHP quantum dots using an antisolvent to precipitate and purify the dots forming surface traps that lead to decreased luminescence, compromised colloidal stability, and emission broadening. Here, the introduction of inorganic ligands in the antisolvents used in dot purification is reported in order to overcome this problem. MHPs that are colloidally stable for over 1 year at 25 °C and 40% humidity are demonstrated and films that are stable under 100 W cm-2 photoirradiation, 4× longer than the best previously reported MHPs, are reported. In LEDs, the materials enable an EQE of 24.4% (average 22.5 ± 1.3%) and narrow emission (full-width at half maximum of 30 nm). Sixfold-enhanced operating stability relative to the most stable prior red perovskite LEDs having external quantum efficiency >20% is reported.
Collapse
|
14
|
Multiscale hierarchical structures from a nanocluster mesophase. NATURE MATERIALS 2022; 21:518-525. [PMID: 35422509 DOI: 10.1038/s41563-022-01223-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/07/2021] [Accepted: 02/21/2022] [Indexed: 05/16/2023]
Abstract
Spontaneous hierarchical self-organization of nanometre-scale subunits into higher-level complex structures is ubiquitous in nature. The creation of synthetic nanomaterials that mimic the self-organization of complex superstructures commonly seen in biomolecules has proved challenging due to the lack of biomolecule-like building blocks that feature versatile, programmable interactions to render structural complexity. In this study, highly aligned structures are obtained from an organic-inorganic mesophase composed of monodisperse Cd37S18 magic-size cluster building blocks. Impressively, structural alignment spans over six orders of magnitude in length scale: nanoscale magic-size clusters arrange into a hexagonal geometry organized inside micrometre-sized filaments; self-assembly of these filaments leads to fibres that then organize into uniform arrays of centimetre-scale bands with well-defined surface periodicity. Enhanced patterning can be achieved by controlling processing conditions, resulting in bullseye and 'zigzag' stacking patterns with periodicity in two directions. Overall, we demonstrate that colloidal nanomaterials can exhibit a high level of self-organization behaviour at macroscopic-length scales.
Collapse
|
15
|
Enhanced emission directivity from asymmetrically strained colloidal quantum dots. SCIENCE ADVANCES 2022; 8:eabl8219. [PMID: 35196093 PMCID: PMC8865764 DOI: 10.1126/sciadv.abl8219] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/07/2021] [Accepted: 12/28/2021] [Indexed: 06/14/2023]
Abstract
Current state-of-the-art quantum dot light-emitting diodes have reached close to unity internal quantum efficiency. Further improvement in external quantum efficiency requires more efficient photon out-coupling. Improving the directivity of the photon emission is considered to be the most feasible approach. Here, we report improved emission directivity from colloidal quantum dot films. By growing an asymmetric compressive shell, we are able to lift their band-edge state degeneracy, which leads to an overwhelming population of exciton with in-plane dipole moment, as desired for high-efficiency photon out-coupling. The in-plane dipole proportion determined by back-focal plane imaging method is 88%, remarkably higher than 70% obtained from conventional hydrostatically strained colloidal quantum dots. Enhanced emission directivity obtained here opens a path to increasing the external quantum efficiencies notably.
Collapse
|
16
|
Wide-Bandgap Perovskite Quantum Dots in Perovskite Matrix for Sky-Blue Light-Emitting Diodes. J Am Chem Soc 2022; 144:4009-4016. [PMID: 35192324 DOI: 10.1021/jacs.1c12556] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
The epitaxial growth of a perovskite matrix on quantum dots (QDs) has enabled the emergence of efficient red light-emitting diodes (LEDs) because it unites efficient charge transport with strong surface passivation. However, the synthesis of wide-band gap (Eg) QD-in-matrix heterostructures has so far remained elusive in the case of sky-blue LEDs. Here, we developed CsPbBr3 QD-in-perovskite matrix solids that enable high luminescent efficiency and spectral stability with an optical Eg of over 2.6 eV. We screened alloy candidates that modulate the perovskite Eg and allow heteroepitaxy, seeking to implement lattice-matched type-I band alignment. Specifically, we introduced a CsPb1-xSrxBr3 matrix, in which alloying with Sr2+ increased the Eg of the perovskite and minimized lattice mismatch. We then developed an approach to passivation that would overcome the hygroscopic nature of Sr2+. We found that bis(4-fluorophenyl)phenylphosphine oxide strongly coordinates with Sr2+ and provides steric hindrance to block H2O, a finding obtained by combining molecular dynamics simulations with experimental results. The resulting QD-in-matrix solids exhibit enhanced air- and photo-stability with efficient charge transport from the matrix to the QDs. LEDs made from this material exhibit an external quantum efficiency of 13.8% and a brightness exceeding 6000 cd m-2.
Collapse
|
17
|
Bright and Stable Light-Emitting Diodes Based on Perovskite Quantum Dots in Perovskite Matrix. J Am Chem Soc 2021; 143:15606-15615. [PMID: 34542273 DOI: 10.1021/jacs.1c02148] [Citation(s) in RCA: 32] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Light-emitting diodes (LEDs) based on metal halide perovskite quantum dots (QDs) have achieved impressive external quantum efficiencies; however, the lack of surface protection of QDs, combined with efficiency droop, decreases device operating lifetime at brightnesses of interest. The epitaxial incorporation of QDs within a semiconducting shell provides surface passivation and exciton confinement. Achieving this goal in the case of perovskite QDs remains an unsolved challenge in view of the materials' chemical instability. Here, we report perovskite QDs that remain stable in a thin layer of precursor solution of perovskite, and we use strained QDs as nucleation centers to drive the homogeneous crystallization of a perovskite matrix. Type-I band alignment ensures that the QDs are charge acceptors and radiative emitters. The new materials show suppressed Auger bi-excition recombination and bright luminescence at high excitation (600 W cm-2), whereas control materials exhibit severe bleaching. Primary red LEDs based on the new materials show an external quantum efficiency of 18%, and these retain high performance to brightnesses exceeding 4700 cd m-2. The new materials enable LEDs having an operating half-life of 2400 h at an initial luminance of 100 cd m-2, representing a 100-fold enhancement relative to the best primary red perovskite LEDs.
Collapse
|
18
|
Facet-Oriented Coupling Enables Fast and Sensitive Colloidal Quantum Dot Photodetectors. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2101056. [PMID: 34245178 DOI: 10.1002/adma.202101056] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/07/2021] [Revised: 04/14/2021] [Indexed: 06/13/2023]
Abstract
Charge carrier transport in colloidal quantum dot (CQD) solids is strongly influenced by coupling among CQDs. The shape of as-synthesized CQDs results in random orientational relationships among facets in CQD solids, and this limits the CQD coupling strength and the resultant performance of optoelectronic devices. Here, colloidal-phase reconstruction of CQD surfaces, which improves facet alignment in CQD solids, is reported. This strategy enables control over CQD faceting and allows demonstration of enhanced coupling in CQD solids. The approach utilizes post-synthetic resurfacing and unites surface passivation and colloidal stability with a propensity for dots to couple via (100):(100) facets, enabling increased hole mobility. Experimentally, the CQD solids exhibit a 10× increase in measured hole mobility compared to control CQD solids, and enable photodiodes (PDs) exhibiting 70% external quantum efficiency (vs 45% for control devices) and specific detectivity, D* > 1012 Jones, each at 1550 nm. The photodetectors feature a 7 ns response time for a 0.01 mm2 area-the fastest reported for solution-processed short-wavelength infrared PDs.
Collapse
|
19
|
Reply to: Perovskite decomposition and missing crystal planes in HRTEM. Nature 2021; 594:E8-E9. [PMID: 34108690 DOI: 10.1038/s41586-021-03424-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
20
|
Electro-Optic Modulation Using Metal-Free Perovskites. ACS APPLIED MATERIALS & INTERFACES 2021; 13:19042-19047. [PMID: 33856188 DOI: 10.1021/acsami.1c03406] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Electro-optic (EO) modulation is of interest to impart information onto an optical carrier. Inorganic crystals-most notably LiNbO3 and BaTiO3-exhibit EO modulation and good stability, but are difficult to integrate with silicon photonic technology. Solution-processed organic EO materials are readily integrated but suffer from thermal degradation at the temperatures required in operating conditions for accelerated reliability studies. Hybrid organic-inorganic metal halide perovskites have the potential to overcome these limitations; however, these have so far relied on heavy metals such as lead and cadmium. Here, we report linear EO modulation using metal-free perovskites, which maintain the crystalline features of the inorganic EO materials and incorporate the flexible functionality of organic EO chromophores. We find that, by introducing a deficiency of cations, we reduce the symmetry in the perovskite crystal and produce thereby an increased EO response. The best-engineered perovskites reported herein showcase an EO coefficient of 14 pm V-1 at a modulation frequency of 80 kHz, an order of magnitude higher than in the nondefective materials. We observe split peaks in the X-ray diffraction and neutron diffraction patterns of the defective sample, indicating that the crystalline structure has been distorted and the symmetry reduced. Density functional theory (DFT) studies link this decreased symmetry to NH4+ deficiencies. This demonstration of EO from metal-free perovskites highlights their potential in next-generation optical information transmission.
Collapse
|
21
|
Stabilizing Highly Active Ru Sites by Suppressing Lattice Oxygen Participation in Acidic Water Oxidation. J Am Chem Soc 2021; 143:6482-6490. [PMID: 33891414 DOI: 10.1021/jacs.1c00384] [Citation(s) in RCA: 90] [Impact Index Per Article: 30.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
In hydrogen production, the anodic oxygen evolution reaction (OER) limits the energy conversion efficiency and also impacts stability in proton-exchange membrane water electrolyzers. Widely used Ir-based catalysts suffer from insufficient activity, while more active Ru-based catalysts tend to dissolve under OER conditions. This has been associated with the participation of lattice oxygen (lattice oxygen oxidation mechanism (LOM)), which may lead to the collapse of the crystal structure and accelerate the leaching of active Ru species, leading to low operating stability. Here we develop Sr-Ru-Ir ternary oxide electrocatalysts that achieve high OER activity and stability in acidic electrolyte. The catalysts achieve an overpotential of 190 mV at 10 mA cm-2 and the overpotential remains below 225 mV following 1,500 h of operation. X-ray absorption spectroscopy and 18O isotope-labeled online mass spectroscopy studies reveal that the participation of lattice oxygen during OER was suppressed by interactions in the Ru-O-Ir local structure, offering a picture of how stability was improved. The electronic structure of active Ru sites was modulated by Sr and Ir, optimizing the binding energetics of OER oxo-intermediates.
Collapse
|
22
|
Linear Electro-Optic Modulation in Highly Polarizable Organic Perovskites. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2006368. [PMID: 33325577 DOI: 10.1002/adma.202006368] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/17/2020] [Revised: 11/20/2020] [Indexed: 06/12/2023]
Abstract
Electrical-to-optical signal conversion is widely employed in information technology and is implemented using on-chip optical modulators. State-of-the-art modulator technologies are incompatible with silicon manufacturing techniques: inorganic nonlinear crystals such as LiNbO3 are integrated with silicon photonic chips only using complex approaches, and hybrid silicon-LiNbO3 optical modulators show either low bandwidth or high operating voltage. Organic perovskites are solution-processed materials readily integrated with silicon photonics; and organic molecules embedded within the perovskite scaffold allow in principle for high polarizability. However, it is found that the large molecules required for high polarizability also require an increase of the size of the perovskite cavity: specifically, using the highly polarizable DR2+ (R = H, F, Cl) in the A site necessitates the exploration of new X-site options. Only by introducing BF4 - as the X-site molecule is it possible to synthesize (DCl)(NH4 )(BF4 )3 , a material exhibiting a linear EO coefficient of 20 pm V-1 , which is 10 times higher than that of metal halide perovskites and is a 1.5 fold enhancement compared to reported organic perovskites. The EO response of the organic perovskite approaches that of LiNbO3 (reff ≈ 30 pm V-1 ) and highlights the promise of rationally designed organic perovskites for use in efficient EO modulators.
Collapse
|
23
|
Structural Distortion and Bandgap Increase of Two-Dimensional Perovskites Induced by Trifluoromethyl Substitution on Spacer Cations. J Phys Chem Lett 2020; 11:10144-10149. [PMID: 33191751 DOI: 10.1021/acs.jpclett.0c02909] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
In further advancing display technologies, especially for improved blue emitters, to engineer the bandgap of promising semiconductors such as hybrid perovskites is important. Present-day methods for tuning the bandgaps of perovskites, such as the incorporation of mixed halide anions, suffer drawbacks such as phase separation and difficulty in synthesis. Here we report a new 2D lead iodide perovskite that emits in the blue spectral region. We exploit an increased angular distortion of PbI42- octahedra to widen the bandgap of 2D metal halide perovskites. We synthesized 2D lead iodide perovskites based on (4-Y-C6H4CH2NH3)2PbI4 (Y = H, F, Cl, Br, I) and substituted the halogen atoms with a -CF3 group to create (4-CF3-C6H4CH2NH3)2PbI4 compounds. We observed that the CF3-substituted material exhibited a ∼0.16 eV larger bandgap than did the halogen-substituted materials. We used X-ray diffraction and density functional theory simulations and found that the blue shift can be assigned to the angular distortion of the PbI42- lattice, a distortion traceable to repulsive intermolecular interactions between the trifluoromethyl groups on oppositely-arranged spacers. These results add a degree of freedom in tuning 2D perovskites to selected bandgaps for optoelectronic applications.
Collapse
|
24
|
High-valence metals improve oxygen evolution reaction performance by modulating 3d metal oxidation cycle energetics. Nat Catal 2020. [DOI: 10.1038/s41929-020-00525-6] [Citation(s) in RCA: 193] [Impact Index Per Article: 48.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
25
|
Color-pure red light-emitting diodes based on two-dimensional lead-free perovskites. SCIENCE ADVANCES 2020; 6:6/42/eabb0253. [PMID: 33055155 PMCID: PMC7556835 DOI: 10.1126/sciadv.abb0253] [Citation(s) in RCA: 53] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2020] [Accepted: 08/28/2020] [Indexed: 05/21/2023]
Abstract
It remains a central challenge to the information display community to develop red light-emitting diodes (LEDs) that meet demanding color coordinate requirements for wide color gamut displays. Here, we report high-efficiency, lead-free (PEA)2SnI4 perovskite LEDs (PeLEDs) with color coordinates (0.708, 0.292) that fulfill the Rec. 2100 specification for red emitters. Using valeric acid (VA)-which we show to be strongly coordinated to Sn2+-we slow the crystallization rate of the perovskite, improving the film morphology. The incorporation of VA also protects tin from undesired oxidation during the film-forming process. The improved films and the reduced Sn4+ content enable PeLEDs with an external quantum efficiency of 5% and an operating half-life exceeding 15 hours at an initial brightness of 20 cd/m2 This work illustrates the potential of Cd- and Pb-free PeLEDs for display technology.
Collapse
|
26
|
Orthogonal colloidal quantum dot inks enable efficient multilayer optoelectronic devices. Nat Commun 2020; 11:4814. [PMID: 32968078 PMCID: PMC7511352 DOI: 10.1038/s41467-020-18655-7] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2020] [Accepted: 09/01/2020] [Indexed: 12/02/2022] Open
Abstract
Surface ligands enable control over the dispersibility of colloidal quantum dots (CQDs) via steric and electrostatic stabilization. Today’s device-grade CQD inks have consistently relied on highly polar solvents: this enables facile single-step deposition of multi-hundred-nanometer-thick CQD films; but it prevents the realization of CQD film stacks made up of CQDs having different compositions, since polar solvents redisperse underlying films. Here we introduce aromatic ligands to achieve process-orthogonal CQD inks, and enable thereby multifunctional multilayer CQD solids. We explore the effect of the anchoring group of the aromatic ligand on the solubility of CQD inks in weakly-polar solvents, and find that a judicious selection of the anchoring group induces a dipole that provides additional CQD-solvent interactions. This enables colloidal stability without relying on bulky insulating ligands. We showcase the benefit of this ink as the hole transport layer in CQD optoelectronics, achieving an external quantum efficiency of 84% at 1210 nm. The realisation of film made up of different compositions using colloidal QD inks remains a challenge because of redispersing of underlying films by polar solvents. Here, the authors introduce aromatic ligands to achieve QD inks in weakly-polar solvents that enable fabrication of multi-compositional films.
Collapse
|
27
|
ZnFe 2O 4 Leaves Grown on TiO 2 Trees Enhance Photoelectrochemical Water Splitting. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2004354. [PMID: 33439545 DOI: 10.1002/smll.202004354] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
|
28
|
Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots. NATURE NANOTECHNOLOGY 2020; 15:668-674. [PMID: 32632321 DOI: 10.1038/s41565-020-0714-5] [Citation(s) in RCA: 216] [Impact Index Per Article: 54.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2019] [Accepted: 05/11/2020] [Indexed: 05/11/2023]
Abstract
Colloidal quantum dot (QD) solids are emerging semiconductors that have been actively explored in fundamental studies of charge transport1 and for applications in optoelectronics2. Forming high-quality QD solids-necessary for device fabrication-requires substitution of the long organic ligands used for synthesis with short ligands that provide increased QD coupling and improved charge transport3. However, in perovskite QDs, the polar solvents used to carry out the ligand exchange decompose the highly ionic perovskites4. Here we report perovskite QD resurfacing to achieve a bipolar shell consisting of an inner anion shell, and an outer shell comprised of cations and polar solvent molecules. The outer shell is electrostatically adsorbed to the negatively charged inner shell. This approach produces strongly confined perovskite QD solids that feature improved carrier mobility (≥0.01 cm2 V-1 s-1) and reduced trap density relative to previously reported low-dimensional perovskites. Blue-emitting QD films exhibit photoluminescence quantum yields exceeding 90%. By exploiting the improved mobility, we have been able to fabricate CsPbBr3 QD-based efficient blue and green light-emitting diodes. Blue devices with reduced trap density have an external quantum efficiency of 12.3%; the green devices achieve an external quantum efficiency of 22%.
Collapse
|
29
|
Tertiary Hierarchical Complexity in Assemblies of Sulfur-Bridged Metal Chiral Clusters. J Am Chem Soc 2020; 142:14495-14503. [DOI: 10.1021/jacs.0c04764] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
30
|
Ligand-Assisted Reconstruction of Colloidal Quantum Dots Decreases Trap State Density. NANO LETTERS 2020; 20:3694-3702. [PMID: 32227970 DOI: 10.1021/acs.nanolett.0c00638] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Increasing the power conversion efficiency (PCE) of colloidal quantum dot (CQD) solar cells has relied on improving the passivation of CQD surfaces, enhancing CQD coupling and charge transport, and advancing device architecture. The presence of hydroxyl groups on the nanoparticle surface, as well as dimers-fusion between CQDs-has been found to be the major source of trap states, detrimental to optoelectronic properties and device performance. Here, we introduce a CQD reconstruction step that decreases surface hydroxyl groups and dimers simultaneously. We explored the dynamic interaction of charge carriers between band-edge states and trap states in CQDs using time-resolved spectroscopy, showing that trap to ground-state recombination occurs mainly from surface defects in coupled CQD solids passivated using simple metal halides. Using CQD reconstruction, we demonstrate a 60% reduction in trap density and a 25% improvement in charge diffusion length. These translate into a PCE of 12.5% compared to 10.9% for control CQDs.
Collapse
|
31
|
Accelerated discovery of CO2 electrocatalysts using active machine learning. Nature 2020; 581:178-183. [DOI: 10.1038/s41586-020-2242-8] [Citation(s) in RCA: 407] [Impact Index Per Article: 101.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2018] [Accepted: 03/13/2020] [Indexed: 12/24/2022]
|
32
|
Abstract
The tailored spatial polarization of coherent light beams is important for applications ranging from microscopy to biophysics to quantum optics. Miniaturized light sources are needed for integrated, on-chip photonic devices with desired vector beams; however, this issue is unresolved because most lasers rely on bulky optical elements to achieve such polarization control. Here, we report on quantum dot-plasmon lasers with engineered polarization patterns controllable by near-field coupling of colloidal quantum dots to metal nanoparticles. Conformal coating of CdSe-CdS core-shell quantum dot films on Ag nanoparticle lattices enables the formation of hybrid waveguide-surface lattice resonance (W-SLR) modes. The sidebands of these hybrid modes at nonzero wavevectors facilitate directional lasing emission with either radial or azimuthal polarization depending on the thickness of the quantum dot film.
Collapse
|
33
|
Chloride Insertion-Immobilization Enables Bright, Narrowband, and Stable Blue-Emitting Perovskite Diodes. J Am Chem Soc 2020; 142:5126-5134. [PMID: 32150404 DOI: 10.1021/jacs.9b12323] [Citation(s) in RCA: 40] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduced-dimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m2. By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m2.
Collapse
|
34
|
Combining Efficiency and Stability in Mixed Tin-Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1907058. [PMID: 32030824 DOI: 10.1002/adma.201907058] [Citation(s) in RCA: 51] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Revised: 01/02/2020] [Indexed: 05/26/2023]
Abstract
The development of narrow-bandgap (Eg ≈ 1.2 eV) mixed tin-lead (Sn-Pb) halide perovskites enables all-perovskite tandem solar cells. Whereas pure-lead halide perovskite solar cells (PSCs) have advanced simultaneously in efficiency and stability, achieving this crucial combination remains a challenge in Sn-Pb PSCs. Here, Sn-Pb perovskite grains are anchored with ultrathin layered perovskites to overcome the efficiency-stability tradeoff. Defect passivation is achieved both on the perovskite film surface and at grain boundaries, an approach implemented by directly introducing phenethylammonium ligands in the antisolvent. This improves device operational stability and also avoids the excess formation of layered perovskites that would otherwise hinder charge transport. Sn-Pb PSCs with fill factors of 79% and a certified power conversion efficiency (PCE) of 18.95% are reported-among the highest for Sn-Pb PSCs. Using this approach, a 200-fold enhancement in device operating lifetime is achieved relative to the nonpassivated Sn-Pb PSCs under full AM1.5G illumination, and a 200 h diurnal operating time without efficiency drop is achieved under filtered AM1.5G illumination.
Collapse
|
35
|
Engineering Directionality in Quantum Dot Shell Lasing Using Plasmonic Lattices. NANO LETTERS 2020; 20:1468-1474. [PMID: 32004007 DOI: 10.1021/acs.nanolett.9b05342] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
We report how the direction of quantum dot (QD) lasing can be engineered by exploiting high-symmetry points in plasmonic nanoparticle (NP) lattices. The nanolaser architecture consists of CdSe-CdS core-shell QD layers conformally coated on two-dimensional square arrays of Ag NPs. Using waveguide-surface lattice resonances (W-SLRs) near the Δ point in the Brillouin zone as optical feedback, we achieved lasing from the gain in CdS shells at off-normal emission angles. Changing the periodicity of the plasmonic lattices enables other high-symmetry points (Γ or M) of the lattice to overlap with the QD shell emission, which facilitates tuning of the lasing direction. We also increased the thickness of the QD layer to introduce higher-order W-SLR modes with additional avoided crossings in the band structure, which expands the selection of cavity modes for any desired lasing emission angle.
Collapse
|
36
|
Stabilizing Surface Passivation Enables Stable Operation of Colloidal Quantum Dot Photovoltaic Devices at Maximum Power Point in an Air Ambient. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1906497. [PMID: 31930771 DOI: 10.1002/adma.201906497] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/03/2019] [Revised: 11/22/2019] [Indexed: 06/10/2023]
Abstract
Colloidal quantum dots (CQDs) are promising materials for photovoltaic (PV) applications owing to their size-tunable bandgap and solution processing. However, reports on CQD PV stability have been limited so far to storage in the dark; or operation illuminated, but under an inert atmosphere. CQD PV devices that are stable under continuous operation in air have yet to be demonstrated-a limitation that is shown here to arise due to rapid oxidation of both CQDs and surface passivation. Here, a stable CQD PV device under continuous operation in air is demonstrated by introducing additional potassium iodide (KI) on the CQD surface that acts as a shielding layer and thus stands in the way of oxidation of the CQD surface. The devices (unencapsulated) retain >80% of their initial efficiency following 300 h of continuous operation in air, whereas CQD PV devices without KI lose the amount of performance within just 21 h. KI shielding also provides improved surface passivation and, as a result, a higher power conversion efficiency (PCE) of 12.6% compared with 11.4% for control devices.
Collapse
|
37
|
Abstract
Reduced-dimensional perovskites are attractive light-emitting materials due to their efficient luminescence, color purity, tunable bandgap, and structural diversity. A major limitation in perovskite light-emitting diodes is their limited operational stability. Here we demonstrate that rapid photodegradation arises from edge-initiated photooxidation, wherein oxidative attack is powered by photogenerated and electrically-injected carriers that diffuse to the nanoplatelet edges and produce superoxide. We report an edge-stabilization strategy wherein phosphine oxides passivate unsaturated lead sites during perovskite crystallization. With this approach, we synthesize reduced-dimensional perovskites that exhibit 97 ± 3% photoluminescence quantum yields and stabilities that exceed 300 h upon continuous illumination in an air ambient. We achieve green-emitting devices with a peak external quantum efficiency (EQE) of 14% at 1000 cd m-2; their maximum luminance is 4.5 × 104 cd m-2 (corresponding to an EQE of 5%); and, at 4000 cd m-2, they achieve an operational half-lifetime of 3.5 h.
Collapse
|
38
|
Machine Learning Accelerates Discovery of Optimal Colloidal Quantum Dot Synthesis. ACS NANO 2019; 13:11122-11128. [PMID: 31539477 DOI: 10.1021/acsnano.9b03864] [Citation(s) in RCA: 43] [Impact Index Per Article: 8.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/06/2023]
Abstract
Colloidal quantum dots (CQDs) allow broad tuning of the bandgap across the visible and near-infrared spectral regions. Recent advances in applying CQDs in light sensing, photovoltaics, and light emission have heightened interest in achieving further synthetic improvements. In particular, improving monodispersity remains a key priority in order to improve solar cells' open-circuit voltage, decrease lasing thresholds, and improve photodetectors' noise-equivalent power. Here we utilize machine-learning-in-the-loop to learn from available experimental data, propose experimental parameters to try, and, ultimately, point to regions of synthetic parameter space that will enable record-monodispersity PbS quantum dots. The resultant studies reveal that adding a growth-slowing precursor (oleylamine) allows nucleation to prevail over growth, a strategy that enables record-large-bandgap (611 nm exciton) PbS nanoparticles with a well-defined excitonic absorption peak (half-width at half-maximum (hwhm) of 145 meV). At longer wavelengths, we also achieve improved monodispersity, with an hwhm of 55 meV at 950 nm and 24 meV at 1500 nm, compared to the best published to date values of 75 and 26 meV, respectively.
Collapse
|
39
|
Temperature-Induced Self-Compensating Defect Traps and Gain Thresholds in Colloidal Quantum Dots. ACS NANO 2019; 13:8970-8976. [PMID: 31310518 DOI: 10.1021/acsnano.9b02834] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Continuous-wave (CW) lasing was recently achieved in colloidal quantum dots (CQDs) by lowering the threshold through the introduction of biaxial strain. However, the CW laser threshold is still much higher than the femtosecond threshold. This must be addressed before electrically injected lasing can be realized. Here we investigate the relationship between threshold and temperature and find a subpicosecond recombination process that proceeds very efficiently at temperatures reached during CW excitation. We combine density functional theory and molecular dynamics simulations to explore potential candidates for such a process, and find that crystal defects having thermally vibrating energy levels can become electronic traps-i.e., they can protrude into the bandgap-when they are sufficiently distorted at higher temperatures. We find that biaxially strained CQDs, which have a lower femtosecond laser threshold than traditional CQDs, result in less heat for a given transparency/gain level and thus undergo this trapping to a lower extent. We also propose methods to tailor CQDs to avoid self-compensating defect traps.
Collapse
|
40
|
|
41
|
Lattice anchoring stabilizes solution-processed semiconductors. Nature 2019; 570:96-101. [DOI: 10.1038/s41586-019-1239-7] [Citation(s) in RCA: 155] [Impact Index Per Article: 31.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2018] [Accepted: 03/28/2019] [Indexed: 12/23/2022]
|
42
|
|
43
|
Anchored Ligands Facilitate Efficient B-Site Doping in Metal Halide Perovskites. J Am Chem Soc 2019; 141:8296-8305. [DOI: 10.1021/jacs.9b02565] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
44
|
In Situ Back-Contact Passivation Improves Photovoltage and Fill Factor in Perovskite Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1807435. [PMID: 30740780 DOI: 10.1002/adma.201807435] [Citation(s) in RCA: 42] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2018] [Revised: 01/14/2019] [Indexed: 06/09/2023]
Abstract
Organic-inorganic hybrid perovskite solar cells (PSCs) have seen a rapid rise in power conversion efficiencies in recent years; however, they still suffer from interfacial recombination and charge extraction losses at interfaces between the perovskite absorber and the charge-transport layers. Here, in situ back-contact passivation (BCP) that reduces interfacial and extraction losses between the perovskite absorber and the hole transport layer (HTL) is reported. A thin layer of nondoped semiconducting polymer at the perovskite/HTL interface is introduced and it is shown that the use of the semiconductor polymer permits-in contrast with previously studied insulator-based passivants-the use of a relatively thick passivating layer. It is shown that a flat-band alignment between the perovskite and polymer passivation layers achieves a high photovoltage and fill factor: the resultant BCP enables a photovoltage of 1.15 V and a fill factor of 83% in 1.53 eV bandgap PSCs, leading to an efficiency of 21.6% in planar solar cells.
Collapse
|
45
|
A Facet-Specific Quantum Dot Passivation Strategy for Colloid Management and Efficient Infrared Photovoltaics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1805580. [PMID: 30860292 DOI: 10.1002/adma.201805580] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/27/2018] [Revised: 02/24/2019] [Indexed: 06/09/2023]
Abstract
Colloidal nanocrystals combine size- and facet-dependent properties with solution processing. They offer thus a compelling suite of materials for technological applications. Their size- and facet-tunable features are studied in synthesis; however, to exploit their features in optoelectronic devices, it will be essential to translate control over size and facets from the colloid all the way to the film. Larger-diameter colloidal quantum dots (CQDs) offer the attractive possibility of harvesting infrared (IR) solar energy beyond absorption of silicon photovoltaics. These CQDs exhibit facets (nonpolar (100)) undisplayed in small-diameter CQDs; and the materials chemistry of smaller nanocrystals fails consequently to translate to materials for the short-wavelength IR regime. A new colloidal management strategy targeting the passivation of both (100) and (111) facets is demonstrated using distinct choices of cations and anions. The approach leads to narrow-bandgap CQDs with impressive colloidal stability and photoluminescence quantum yield. Photophysical studies confirm a reduction both in Stokes shift (≈47 meV) and Urbach tail (≈29 meV). This approach provides a ≈50% increase in the power conversion efficiency of IR photovoltaics compared to controls, and a ≈70% external quantum efficiency at their excitonic peak.
Collapse
|
46
|
Abstract
Solution-processed perovskite quantum wells have been used to fabricate increasingly efficient and stable optoelectronic devices. Little is known about the dynamics of photogenerated excitons in perovskite quantum wells within the first few hundred femtoseconds-a crucial time scale on which energy and charge transfer processes may compete. Here we use ultrafast transient absorption and two-dimensional electronic spectroscopy to clarify the movement of excitons and charges in reduced-dimensional perovskite solids. We report excitonic funneling from strongly to weakly confined perovskite quantum wells within 150 fs, facilitated by strong spectral overlap and orientational alignment among neighboring wells. This energy transfer happens on time scales orders of magnitude faster than charge transfer, which we find to occur instead over 10s to 100s of picoseconds. Simulations of both Förster-type interwell exciton transfer and free carrier charge transfer are in agreement with these experimental findings, with theoretical exciton transfer calculated to occur in 100s of femtoseconds.
Collapse
|
47
|
Pulsed axial epitaxy of colloidal quantum dots in nanowires enables facet-selective passivation. Nat Commun 2018; 9:4947. [PMID: 30470752 PMCID: PMC6251926 DOI: 10.1038/s41467-018-07422-4] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2018] [Accepted: 10/25/2018] [Indexed: 11/08/2022] Open
Abstract
Epitaxially stacking colloidal quantum dots in nanowires offers a route to selective passivation of defective facets while simultaneously enabling charge transfer to molecular adsorbates - features that must be combined to achieve high-efficiency photocatalysts. This requires dynamical switching of precursors to grow, alternatingly, the quantum dots and nanowires - something not readily implemented in conventional flask-based solution chemistry. Here we report pulsed axial epitaxy, a growth mode that enables the stacking of multiple CdS quantum dots in ZnS nanowires. The approach relies on the energy difference of incorporating these semiconductor atoms into the host catalyst, which determines the nucleation sequence at the catalyst-nanowire interface. This flexible synthetic strategy allows precise modulation of quantum dot size, number, spacing, and crystal phase. The facet-selective passivation of quantum dots in nanowires opens a pathway to photocatalyst engineering: we report photocatalysts that exhibit an order-of-magnitude higher photocatalytic hydrogen evolution rates than do plain CdS quantum dots.
Collapse
|
48
|
Picosecond Charge Transfer and Long Carrier Diffusion Lengths in Colloidal Quantum Dot Solids. NANO LETTERS 2018; 18:7052-7059. [PMID: 30359524 DOI: 10.1021/acs.nanolett.8b03020] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Quantum dots (QDs) are promising candidates for solution-processed thin-film optoelectronic devices. Both the diffusion length and the mobility of photoexcited charge carriers in QD solids are critical determinants of solar cell performance; yet various techniques offer diverse values of these key parameters even in notionally similar films. Here we report diffusion lengths and interdot charge transfer rates using a 3D donor/acceptor technique that directly monitors the rate at which photoexcitations reach small-bandgap dot inclusions having a known spacing within a larger-bandgap QD matrix. Instead of relying on photoluminescence (which can be weak in strongly coupled QD solids), we use ultrafast transient absorption spectroscopy, a method where sensitivity is undiminished by exciton dissociation. We measure record diffusion lengths of ∼300 nm in metal halide exchanged PbS QD solids that have led to power conversion efficiencies of 12%, and determine 8 ps interdot hopping of carriers following photoexcitation, among the fastest rates reported for PbS QD solids. We also find that QD solids composed of smaller QDs ( d = ∼3.2 nm) exhibit 5 times faster interdot charge transfer rates and 10 times lower trap state densities compared to larger ( d = ∼5.5 nm) QDs.
Collapse
|
49
|
Butylamine-Catalyzed Synthesis of Nanocrystal Inks Enables Efficient Infrared CQD Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1803830. [PMID: 30276885 DOI: 10.1002/adma.201803830] [Citation(s) in RCA: 34] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2018] [Revised: 08/21/2018] [Indexed: 05/05/2023]
Abstract
The best-performing colloidal-quantum-dot (CQD) photovoltaic devices suffer from charge recombination within the quasi-neutral region near the back hole-extracting junction. Graded architectures, which provide a widened depletion region at the back junction of device, could overcome this challenge. However, since today's best materials are processed using solvents that lack orthogonality, these architectures have not yet been implemented using the best-performing CQD solids. Here, a new CQD ink that is stable in nonpolar solvents is developed via a neutral donor ligand that functions as a phase-transfer catalyst. This enables the realization of an efficient graded architecture that, with an engineered band-alignment at the back junction, improves the built-in field and charge extraction. As a result, optimized IR CQD solar cells (Eg ≈ 1.3 eV) exhibiting a power conversion efficiency (PCE) of 12.3% are reported. The strategy is applied to small-bandgap (1 eV) IR CQDs to augment the performance of perovskite and crystalline silicon (cSi) 4-terminal tandem solar cells. The devices show the highest PCE addition achieved using a solution-processed active layer: a value of +5% when illuminated through a 1.58 eV bandgap perovskite front filter, providing a pathway to exceed PCEs of 23% in 4T tandem configurations with IR CQD PVs.
Collapse
|
50
|
The quantum-confined Stark effect in layered hybrid perovskites mediated by orientational polarizability of confined dipoles. Nat Commun 2018; 9:4214. [PMID: 30310072 PMCID: PMC6181967 DOI: 10.1038/s41467-018-06746-5] [Citation(s) in RCA: 42] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2018] [Accepted: 09/25/2018] [Indexed: 11/19/2022] Open
Abstract
The quantum-confined Stark effect (QCSE) is an established optical modulation mechanism, yet top-performing modulators harnessing it rely on costly fabrication processes. Here, we present large modulation amplitudes for solution-processed layered hybrid perovskites and a modulation mechanism related to the orientational polarizability of dipolar cations confined within these self-assembled quantum wells. We report an anomalous (blue-shifting) QCSE for layers that contain methylammonium cations, in contrast with cesium-containing layers that show normal (red-shifting) behavior. We attribute the blue-shifts to an extraordinary diminution in the exciton binding energy that arises from an augmented separation of the electron and hole wavefunctions caused by the orientational response of the dipolar cations. The absorption coefficient changes, realized by either the red- or blue-shifts, are the strongest among solution-processed materials at room temperature and are comparable to those exhibited in the highest-performing epitaxial compound semiconductor heterostructures.
Collapse
|