Deterioration of bio-based polylactic acid plastic teabags under environmental conditions and their associated effects on earthworms

In response to the plastic waste crisis, teabag producers have substituted the petrochemical-plastic content of their products with bio-based, biodegradable polymers such as polylactic acid (PLA). Despite widespread use, the degradation rate of PLA/PLA-blended materials in natural soil and their effects on soil biota are poorly understood. This study examined the percentage mass deterioration of teabags with differing cellulose:PLA compositions following burial (-10 cm depth) in an arable field margin for 7-months, using a suite of analytical techniques, such as size exclusion chromatography, 1H nuclear magnetic resonance, dynamic scanning calorimetry, and scanning electron microscopy. The effect of 28-d exposure to teabag discs at environmentally relevant concentrations (0.02 %, 0.04 % and 0.07 % w/w) on the survival, growth and reproduction (OECD TG 222 protocol) of the key soil detritivore Eisenia fetida was assessed in laboratory trials. After 7-month burial, Tbag-A (2.4:1 blend) and Tbag-B (3.5:1 cellulose:PLA blend) lost 66 ± 5 % and 78 ± 4 % of their total mass, primarily attributed to degradation of cellulose as identified by FTIR spectroscopy and a reduction in the cellulose:PLA mass ratio, while Tbag-C (PLA) remained unchanged. There were clear treatment and dose-specific effects on the growth and reproductive output of E. fetida. At 0.07 % w/w of Tbag-A adult mortality marginally increased (15 %) and both the quantity of egg cocoons and the average mass of juveniles also increased, while at concentrations ≥0.04 % w/w of Tbag-C, the quantity of cocoons was suppressed. Adverse effects are comparable to those reported for non-biodegradable petrochemical-based plastic, demonstrating that bio-based PLA does not offer a more 'environmentally friendly' alternative. Our study emphasises the necessity to better understand the environmental fate and ecotoxicity of PLA/PLA-blends to ensure interventions developed through the UN Plastic Pollution Treaty to use alternatives and substitutes to conventional plastics do not result in unintended negative consequences.

Effect of the age of garments used under real-life conditions on microfibre release from polyester and cotton clothing

The release of microfibres from fabrics during laundering represents an important source of plastic and natural microfibres to aquatic environments. Garment age - how long the garment has been used - could be a key factor influencing the rate of release, yet most studies of microfibre shedding have only assessed newly manufactured products. To this end, we quantified microfibre release during laundering in domestic washing machines from polyester (PES) and cotton garments (n = 38) used in real-life conditions for periods between 1 and 31 years with different use intensities. In addition, to better understand the factors involved in microfibre releases, fibre composition (different PES percentages) and type of garments (T-shirts, polo shirts, uniforms, sports shirts, and sweatshirts) were examined. All garments released microfibres during washing, while the older garments presented higher releases for clothing with a PES/cotton blend. In general, older garments (15-31 years) released nearly twice as many fibres when washed than newer garments (1-10 years). The mass of microfibres released was consistently greater in garments with a higher proportion of cotton than PES (up to 1.774 mg g-1 in 2% PES and 0.366 mg g-1 in 100% PES fabrics), suggesting that cotton might be released more readily such that the relative proportion of PES in the garments could increase over time. Additionally, SEM images showed fibre damage, with fibres from the older garments exhibiting more peeling and splitting. While it is important to note that the overall environmental footprint is undoubtedly reduced by keeping garments in use for longer periods of time, older garments were shown to release more microfibres.

Features of the highway road network that generate or retain tyre wear particles

The environmental accumulation of microplastics poses a formidable global challenge, with tyre wear particles (TWPs) emerging as major and potentially harmful contributors to this particulate pollution. A critical pathway for TWPs to aquatic environments is via road drainage. While drainage assets are employed worldwide, their effectiveness in retaining microplastics of highly variable densities (TWP ~ 1-2.5 g cm3) remains unknown. This study examines their ability to impede the transfer of TWPs from the UK Strategic Road Network (SRN) to aquatic ecosystems. Samples were collected from the influent, effluent and sediments of three retention ponds and three wetlands. The rate of TWP generation is known to vary in response to vehicle speed and direction. To ascertain the significance of this variability, we further compared the mass of TWPs in drainage from curved and straight sections of the SRN across eight drainage outfalls. Pyrolysis gas chromatography-mass spectrometry (Py-GC-MS) was used to quantify tyre wear using benzothiazole as a molecular marker for TWPs (with an internal standard benzothiazole-D4). Tyre wear was present in drainage from the SRN at concentrations of 2.86 ± 6 mg/L and was found within every sample analysed. Drainage from curved sections of the SRN contained on average a 40% greater TWP mass than straight sections but this was not significant. The presence of wetlands and retention ponds generally led to a reduction in TWP mass (74.9% ± 8.2). This effect was significant for retention ponds but not for wetlands; most probably due to variability among sites and sampling occasions. Similar drainage assets are used on a global scale; hence our results are of broad relevance to the management of TWP pollution.

The distribution and characterisation of microplastics in air, surface water and sediment within a major river system

Rivers are key pathways for the transfer of microplastics (MP) to marine environments. However, there are considerable uncertainties about the amount of microplastics transported by rivers to the ocean; this results in inaccuracies in our understanding of microplastic quantity and transport by freshwater systems. Additionally, it has been suggested that rivers may represent long-term sinks, with microplastics accumulating in sediment due to their high density or other biological, chemical, and physical factors. The atmosphere is also an important pathway by which airborne microplastics may enter aquatic habitats. Here, we compare for first time microplastics type and concentration in these key environmental mediums (air, water and sediment) along a major river (Ganges), from sea to source to understand 1) the abundance, 2) the spatial distribution, and 3) characteristics. Mean microplastic abundance settling from the atmosphere was 41.12 MP m2 day-1; while concentrations in sediment were 57.00 MP kg-1 and in water were 0.05 MP L-1. Across all sites and environmental mediums, rayon (synthetically altered cellulose) was the dominant polymer (54-82 %), followed by acrylic (6-23 %) and polyester (9-17 %). Fibres were the dominant shape (95-99 %) and blue was the most common colour (48-79 %). Across water and sediment environmental mediums, the number of microplastics per sample increased from the source of the Ganges to the sea. Additionally, higher population densities correlated with increased microplastic abundance for air and water samples. We suggest that clothing is likely to be the prominent source of microplastics to the river system, influenced by atmospheric deposition, wastewater and direct input (e.g. handwashing of clothes in the Ganges), especially in high density population areas. However, we suggest that subsequent microplastic release to the marine environment is strongly influenced by polymer type and shape, with a large proportion of denser microplastics settling in sediment prior to the river discharging to the ocean.

Translocation of 14C-polystyrene nanoplastics into fish during a very-low concentration dietary exposure

Assessing the dietary accumulation of nanoplastics in animals following very-low exposure concentrations is restricted due to analytical limitations. This study adapted a method for synthesising semi-stable 14C-PS NPs (through styrene polymerisation) in small volumes for deployment in environmental studies. The method was developed with non-labelled material where the final polystyrene product had a primary particle size of 35 ± 8 nm (as measured by transmission electron microscopy). This method was then applied to 14C-labelled styrene to produce radiolabelled polystyrene nanoplastics (14C-PS NPs). The 14C-PS NPs were added (top-dressed) to a commercially available fish feed, with a measured concentration of 27.9 ± 2.1 kBq kg-1 (n = 5), equating to 5.9 μg polystyrene kg-1 feed. Fish (rainbow trout; Oncorhynchus mykiss) were fed this diet at a ration of 2% body weight per day for a period of two weeks. On day 3, 7 and 14, the fish were sampled for the mid intestine, hind intestine, kidney and liver, and measured for tissue radioactivity (determined by liquid scintillation counting). Some background activity was detected in the control samples (e.g., 1-16 and 4-11 Bq g-1 in the hind intestine and liver, respectively) which is due to natural background fluorescence. By the end of the experiment, the hind intestine and liver had significantly elevated radioactivity (25.3 and 15.0 Bq g-1, respectively) compared to the control, indicating the accumulation of nano polystyrene. In the liver, this equated to 1.8 μg polystyrene g-1 dry weight. This study confirms the accumulation of nano particles in vertebrates at low, environmentally relevant concentration, and highlights radiolabelling as a methodological approach suitable for exploring the bioaccumulation of nanoplastics and potential impacts.

Metrics matter: Multiple diversity metrics at different spatial scales are needed to understand species diversity in urban environments

Worldwide, natural habitats are being replaced by artificial structures due to urbanisation. Planning of such modifications should strive for environmental net gain that benefits biodiversity and ecosystems. Alpha (α) and gamma (γ) diversity are often used to assess 'impact' but are insensitive metrics. We test several diversity measures across two spatial scales to compare species diversity in natural and artificial habitats. We show γ-diversity indicates equivalency in biodiversity between natural and artificial habitats, but natural habitats support greater taxon (α) and functional richness. Within-site β-diversity was also greater in natural habitats, but among-site β-diversity was greater in artificial habitats, contradicting the commonly held view that urban ecosystems are more biologically homogenous than natural ecosystems. This study suggests artificial habitats may in fact provide novel habitat for biodiversity, challenges the applicability of the urban homogenisation concept and highlights a significant limitation of using just α-diversity (i.e., multiple metrics are needed and recommended) for assessing environmental net gain and attaining biodiversity conservation goals.

Correction: The Minderoo-Monaco Commission on Plastics and Human Health

[This corrects the article DOI: 10.5334/aogh.4056.].

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Examining the release of synthetic microfibres to the environment via two major pathways: Atmospheric deposition and treated wastewater effluent

Research on the discharge of synthetic microfibres to aquatic environments has typically focused on laundering, where fibres can be discharged via wastewater effluent. However emerging research suggests that microfibres generated during the wear of textiles in normal use could present a major, additional, pathway for microfibre pollution to the environment. This study aimed to quantify and compare the quantities of microfibre entering the marine environment via both these pathways; wastewater discharge and atmospheric deposition. Areas of high and low population density were also evaluated. Samples were collected in and around two British cities (Bristol and Plymouth) both of which are located on tidal waters. Fibres originating from the atmosphere were deposited at an average rate of 81.6 fibres m² d^-1 across urban and rural areas. Treated wastewater effluent contained on an average 0.03 synthetic fibres L^-1. Based on our results we predict ~20,000-500,000 microfibres could be discharged per day from the Wastewater Treatment Plants studied. When the two pathways were compared. Atmospheric deposition of synthetic microfibres appeared the dominant pathway, releasing fibres at a rate several orders of magnitude greater than via treated wastewater effluent. Potential options to reduce the release of microfibres to the environment are discussed and we conclude that intervention at the textile design stage presents the most effective approach. In order to guide policy intervention to inform the Plastics Treaty UNEA 5.2, future work should focus on understanding which permutations of textile design have the greatest influence fibre shedding, during both everyday use and laundering.

Uptake, distribution and elimination of palladium-doped polystyrene nanoplastics in rainbow trout (Oncorhynchus mykiss) following dietary exposure

The ingestion of nanoplastics (NPs) by fish has led to concerns regarding fish health and food chain transfer, but analytical constraints have hindered quantitative data collection on their uptake and depuration. We used palladium-doped polystyrene nanoplastics (PS-Pd NPs, ~200 nm) to track particle fate in rainbow trout (Oncorhynchus mykiss) during a week-long dietary exposure and subsequent 7-day depuration period on a control diet (no added PS-Pd NPs). At Day 3 and 7 of the exposure, and after depuration, the mid intestine, hind intestine, liver, gallbladder, kidney, gill and carcass were sampled. All organs and the carcass were analysed for total Pd content by inductively couple plasma mass spectrometry. After 3 days of exposure, the mid (32.5 ± 8.3 ng g-1) and hind (42.3 ± 8.2 ng g-1) intestine had significantly higher total Pd concentrations compared to the liver and carcass (1.3 ± 0.4 and 3.4 ± 1.1 ng g-1, respectively). At Day 7, there was no time-related difference in any organ (or the carcass) total Pd concentrations compared to Day 3. When the total Pd content was expressed as a body distribution based on mass of tissue, the carcass contained the highest fraction with 72.5 ± 5.2 % at Day 7, which could raise concerns over transfer to higher trophic levels. The total number of particles that entered the fish over the 7 days was 94.5 ± 13.5 × 106 particles, representing 0.07 ± 0.01 % of the Pd the fish had been fed. Following depuration, there was no detectable Pd in any organ or the carcass, indicating clearance from the fish. These data indicate that these NPs are taken into the internal organs and carcass of fish, yet removal of the exposure results in substantial excretion to below the limit of detection.

Tyre particle exposure affects the health of two key estuarine invertebrates

Tyre wear particles may be the largest source of microplastic to the natural environment, yet information on their biological impacts is inadequate. Two key estuarine invertebrates; the clam Scrobicularia plana and the ragworm Hediste diversicolor were exposed to 10% tyre particles in sediment for three days. Both species consumed the particles, although S. plana consumed 25x more than H. diversicolor (967 compared with 35 particles.g^-1 wet weight, respectively). We then investigated the impact of 21 days exposure to different concentrations of tyre particles in estuarine sediments (0.2, 1, and 5% dry weight sediment) on aspects of the health of S. plana and H. diversicolor. Reductions in feeding and burial rates were observed for S. plana but not H. diversicolor, whilst both species showed a decrease in protein content in response to the greatest tyre particle concentration (5%), linked to an 18% decrease in energy reserves for H. diversicolor. Five percent tyre particle exposure led to an increase in total glutathione in the tissues of H. diversicolor, whilst lipid peroxidation decreased in the digestive glands of S. plana, possibly due to an increase in cell turnover. This study found that S. plana's health was impacted at lower concentrations than H. diversicolor, likely due to its consumption of large quantities of sediment. At the high exposure concentration (5%), the health of both invertebrates was impacted. This study did not separate the effects caused by the microplastic particles versus the effects of the chemical additives leaching from these particles, but our results do indicate that future studies should investigate effects in isolation and in combination, to determine the main drivers of toxicity.

Synthetic microplastic abundance and composition along a longitudinal gradient traversing the subtropical gyre in the North Atlantic Ocean

Plastic pollution has been reported in the North Atlantic Ocean since the 1970s, yet limited data over subsequent decades pose challenges when assessing spatio-temporal trends in relation to global leakages and intervention strategies. This study quantified microplastics within the upper ocean along a longitudinal transect of the North Atlantic and its subtropical gyre. Microplastics were sampled from surface and subsurface (-25 m) water using a manta trawl and NIKSIN bottle respectively. The surface water polymer community varied significantly between geographic positions ('inshore', 'gyre', 'open ocean'), and was significantly influenced by fragment quantity. Compared to other positions, the North Atlantic gyre was associated with high concentrations of polyethylene, polypropylene, acrylic and polyamide fragments. Subsurface water was dominated by polyamide and polyester fibres. Backtracked 2-year Lagrangian simulations illustrated connectivity patterns. Continued monitoring of microplastics throughout the water column of the North Atlantic Ocean is required to address knowledge gaps and assess spatio-temporal trends.

Evaluating the performance of the 'Seabin' - A fixed point mechanical litter removal device for sheltered waters

Mechanical interventions are increasingly suggested as a means of removing plastic litter from aquatic environments; their performance is rarely evaluated, but such information is critical to inform policy interventions such as those required to facilitate UNEA 5.2. The Seabin, a fixed-point device designed to remove floating litter in sheltered waters was examined in an urban tidal marina (Southwest UK). It captured on average 58 litter items/day; chiefly plastic pellets, polystyrene balls and plastic fragments. It also captured one marine organism for every 3.6 items of litter, or 13 organisms/day, half of which were dead upon retrieval. The rate of litter capture was inferior to manual cleaning conducted with nets from pontoons or vessels. Hence, in this location the Seabin was of minimal benefit in terms of marine litter removal and resulted in mortality of marine organisms. The presence of such devices could also precipitate false optimism and reliance on technological solutions, rather than systemic changes in our production, use, and disposal of plastics.

Microplastic ingestion in zooplankton from the Fram Strait in the Arctic

Some of the highest microplastic concentrations in marine environments have been reported from the Fram Strait in the Arctic. This region supports a diverse ecosystem dependent on high concentrations of zooplankton at the base of the food web. Zooplankton samples were collected during research cruises using Bongo and MOCNESS nets in the boreal summers of 2018 and 2019. Using FTIR scanning spectroscopy in combination with an automated polymer identification approach, we show that all five species of Arctic zooplankton investigated had ingested microplastics. Amphipod species, found in surface waters or closely associated with sea ice, had ingested significantly more microplastic per individual (Themisto libellula: 1.8, Themisto abyssorrum: 1, Apherusa glacialis: 1) than copepod species (Calanus hyperboreus: 0.21, Calanus glacialis/finmarchicus: 0.01). The majority of microplastics ingested were below 50 μm in size, all were fragments and several different polymer types were present. We quantified microplastics in water samples collected at six of the same stations as the Calanus using an underway sampling system (inlet at 6.5 m water depth). Fragments of several polymer types and anthropogenic cellulosic fibres were present, with an average concentration of 7 microplastic particles (MP) L^-1 (0-18.5 MP L^-1). In comparison to the water samples, those microplastics found ingested by zooplankton were significantly smaller, highlighting that the smaller-sized microplastics were being selected for by the zooplankton. High levels of microplastic ingestion in zooplankton have been associated with negative effects on growth, development, and fecundity. As Arctic zooplankton only have a short window of biological productivity, any negative effect could have broad consequences. As global plastic consumption continues to increase and climate change continues to reduce sea ice cover, releasing ice-bound microplastics and leaving ice free areas open to exploitation, the Arctic could be exposed to further plastic pollution which could place additional strain on this fragile ecosystem.

Potential microplastic release from the maritime industry: Abrasion of rope

While land-based sources of plastic pollution have gained increasing attention in recent years, ocean-based sources have been less well studied. The aim of this study was to compare a variety of ropes (differing in age, wear surface and material) to quantify and characterise the production of microplastic during use. This was achieved by simulating, in laboratory and field experiments, rope hauling activity which is typically performed on board maritime vessels, such as fishing boats. Microplastic generation was quantified by collecting fragments that were released as a consequence of abrasion. Notably, we show that microplastic fragments generated from rope wear during use were characteristically irregular in shape, rather than fibrous such as those assigned to synthetic rope by previous studies. Therefore, we suggest that some of the plastic fragments found in the marine environment may have been falsely attributed to land-based sources but have in fact arisen form the abrasion of rope. Our research found that new and one-year old polypropylene rope released significantly fewer microplastic fragments (14 ± 3 and 22 ± 5) and less microplastic mass (11 ± 2 and 12 ± 3 μg) per metre hauled compared to ropes of two (720 ± 51, 247 ± 18 μg) or ten (767 ± 55, 1052 ± 75 μg) years of age. We show that a substantial amount of microplastic contamination is likely to directly enter the marine environment due to in situ rope abrasion and that rope age is an important factor influencing microplastic release. Our research suggests the need for standards on rope maintenance, replacement, and recycling along with innovation in synthetic rope design with the aim to reduce microplastic emission.

Demonstrating the translocation of nanoplastics across the fish intestine using palladium-doped polystyrene in a salmon gut-sac

Fish are widely reported to ingest microplastics with low levels accumulating in the tissues, but owing to analytical constraints, much less is known about the potential accumulation of nanoplastics via the gut. Recently, the labelling of plastics with inorganic metals (e.g., palladium) has allowed measurements of nanoplastic uptake. The aim of the current study was to quantitatively assess the uptake of nanoplastics by the fish gut using palladium-doped nanoplastics (with a mean hydrodynamic radius of 202 ± 7 nm). By using an ex vivo gut sac exposure system, we show that in 4 h between 200 and 700 million nanoplastics (representing 2.5-9.4% of the administered nanoplastics dose) can enter the mucosa and muscularis layers of the intestine of salmon. Of the particles taken up, up to 700,000 (representing 0.6% of that taken into the tissue) of the nanoplastics passed across the gut epithelium of the anterior intestine and exit into the serosal saline. These data, generated in highly controlled conditions provide a proof-of-concept study, suggesting the potential for nanoplastics to distribute throughout the body, indicating the potential for systemic exposure in fish.

Potential microplastic release from beached fishing gear in Great Britain's region of highest fishing litter density

While land-based sources of marine plastic pollution have gained widespread attention, marine-based sources are less extensively investigated. Here, we provide the first in-depth description of abandoned, lost or otherwise discarded fishing gear (ALDFG) on northern and southern beaches of the English Southwest Peninsula, Great Britain's region of highest ALDFG density. Three distinct categories were recorded: twisted rope (0.28 ± 0.14 m^-1, 17%), braided rope (0.56 ± 0.28 m^-1, 33%) and filament (0.84 ± 0.41 m^-1, 50%), which likely correspond to fishing rope, net and line. Estimating the disintegration of ALDFG from length and filament number suggests that it has the potential to generate 1277 ± 431 microplastic pieces m^-1, with fishing rope (44%) and net (49%) as the largest emitters. Importantly, ALDFG was over five times more abundant on the south coast, which is likely attributable to the three times higher fishing intensity in that area.

Source, sea and sink-A holistic approach to understanding plastic pollution in the Southern Caribbean

Marine plastics are considered to be a major threat to the sustainable use of marine and coastal resources of the Caribbean, on which the region relies heavily for tourism and fishing. To date, little work has quantified plastics within the Caribbean marine environment or examined their potential sources. This study aimed to address this by holistically integrating marine (surface water, subsurface water and sediment) and terrestrial sampling and Lagrangian particle tracking to examine the potential origins, flows and quantities of plastics within the Southern Caribbean. Terrestrial litter and the microplastics identified in marine samples may arise from the maritime and tourism industries, both of which are major contributors to the economies of the Caribbean region. The San Blas islands, Panama had the highest abundance of microplastics at a depth of 25 m, and significantly greater quantities in surface water than recorded in the other countries. Modelling indicated the microplastics likely arose from mainland Panama, which has some of the highest levels of mismanaged waste. Antigua had among the lowest quantities of terrestrial and marine plastics, yet the greatest diversity of polymers. Modelling indicated the majority of the microplastics in Antiguan coastal surface were likely to have originated from the wider North Atlantic Ocean. Ocean currents influence the movements of plastics and thus the relative contributions arising from local and distant sources which become distributed within a country's territorial water. These transboundary movements can undermine local or national legislation aimed at reducing plastic pollution. While this study presents a snapshot of plastic pollution, it contributes towards the void of knowledge regarding marine plastic pollution in the Caribbean Sea and highlights the need for international and interdisciplinary collaborative research and solutions to plastic pollution.

Quantifying the release of tyre wear particles to the marine environment via multiple pathways

Desk-based studies have suggested tyre wear particles contribute a substantial portion of microplastic emissions to the environment, yet few empirical studies report finding tyre wear. Samples were collected from three pathways to the marine environment: atmospheric deposition, treated wastewater effluent, and untreated surface runoff. Pyrolysis coupled to gas chromatography-mass spectrometry was used to detect benzothiazole, a molecular marker for tyres. Benzothiazole was detected in each pathway, emitting tyre wear in addition to other sources of microplastics. Release via surface water drainage was the principle pathway in the regions examined. Laboratory tests indicated larger particles likely settle close to their entry points, whereas smaller particles have potential for longer-range transport and dispersal. The previous lack of reports are likely a consequence of inadequate methods of detection, rather than a low environmental presence. Further work is required to establish distribution, transport potential, and potential impacts once within the marine environment.

Spatially Variable Effects of Artificially-Created Physical Complexity on Subtidal Benthos

In response to the environmental damage caused by urbanization, Nature-based Solutions (NbS) are being implemented to enhance biodiversity and ecosystem processes with mutual benefits for society and nature. Although the field of NbS is flourishing, experiments in different geographic locations and environmental contexts have produced variable results, with knowledge particularly lacking for the subtidal zone. This study tested the effects of physical complexity on colonizing communities in subtidal habitats in two urban locations: (1) Plymouth, United Kingdom (northeast Atlantic) and (2) Tel Aviv, Israel (eastern Mediterranean) for 15- and 12-months, respectively. At each location, physical complexity was manipulated using experimental tiles that were either flat or had 2.5 or 5.0 cm ridges. In Plymouth, biological complexity was also manipulated through seeding tiles with habitat-forming mussels. The effects of the manipulations on taxon and functional richness, and community composition were assessed at both locations, and in Plymouth the survival and size of seeded mussels and abundance and size of recruited mussels were also assessed. Effects of physical complexity differed between locations. Physical complexity did not influence richness or community composition in Plymouth, while in Tel Aviv, there were effects of complexity on community composition. In Plymouth, effects of biological complexity were found with mussel seeding reducing taxon richness, supporting larger recruited mussels, and influencing community composition. Our results suggest that outcomes of NbS experiments are context-dependent and highlight the risk of extrapolating the findings outside of the context in which they were tested.

Relationship between coronary artery calcium score and myocardial blood flow reserve in patients with suspected coronary artery disease

Funding Acknowledgements

Type of funding sources: None.

Background

Both the Coronary Artery Calcium Score (CACS), a non-invasive surrogate for atherosclerotic burden, and reduced myocardial blood flow reserve (MBFR) with normal perfusion, a non-invasive surrogate for coronary vasomotor dysfunction, independently predict future cardiovascular events. The relationship between CACS and MBFR, and potential clinical factors affecting it, is not well understood.

Methods

Among 9467 consecutive patients without known history of CAD who had normal perfusion on 82Rb PET-CT and a concomitantly measured CACS between 01/2010 - 06/2020 within our health system, we assessed the relationship between CACS and MBFR. Multiple linear regression was used to predict MBFR using CACS, adjusted for age, sex, BMI, risk factors, symptoms, resting LVEF and vital signs. Interactions of age, sex, diabetes, and symptoms with CACS were assessed to evaluate if they modified the relationship of CACS with MBFR.

Results

Mean age (SD) of the study cohort was 66.4 (12.6) years, 64% were women, 64% had chest pain and 47% had dyspnea. Reduced MBFR (&lt;2) was present in 44% and CAC &gt;0 in 74% of patients.  There was a modest inverse correlation between MBFR and CACS, r= - 0.18, p = &lt; 0.0001 (Figure). In adjusted analyses, CACS (β for CAC per 100 = -0.013 [95% CI: -0.015, -0.010]) was weakly associated with MBFR, and age, sex, diabetes, or symptoms did not modify this relationship (all interaction p-values &gt;0.1). Older age, female sex, presence of hypertension, diabetes, dyspnea, lower LVEF, higher baseline HR and higher CACS independently predicted reduced MBFR, but explained only 20% of the variance in MBFR (R2 =0.20).

Conclusion

There is a weak relationship between CACS and MBFR, which is not modified by age, sex, symptoms, or other CV risk factors. Coronary calcium burden does not completely reflect the overall disease activity within the coronary circulation, and measures of coronary vasomotor function such as MBFR may offer complementary information on CAD risk to that provided by the total burden of calcified atherosclerosis.

The abundance and characteristics of microplastics in surface water in the transboundary Ganges River

Microplastics (plastic < 5 mm in size) are now known to contaminate riverine systems but understanding about how their concentrations vary spatially and temporally is limited. This information is critical to help identify key sources and pathways of microplastic and develop management interventions. This study provides the first investigation of microplastic abundance, characteristics and temporal variation along the Ganges river; one of the most important catchments of South Asia. From 10 sites along a 2575 km stretch of the river, 20 water samples (3600 L in total) were filtered (60 samples each from pre- and post-monsoon season). Overall, 140 microplastic particles were identified, with higher concentrations found in the pre-monsoon (71.6%) than in post-monsoon (61.6%) samples. The majority of microplastics were fibres (91%) and the remaining were fragments (9%). We estimate that the Ganges, with the combined flows of the Brahmaputra and Meghna rivers (GBM), could release up to 1-3 billion (10⁹) microplastics into the Bay of Bengal (north-eastern portion of the Indian Ocean) every day. This research provides the first step in understanding microplastic contamination in the Ganges and its contribution to the oceanic microplastic load.

The efficiency of devices intended to reduce microfibre release during clothes washing

The washing of synthetic clothes is considered to be a substantial source of microplastic to the environment. Therefore, various devices have been designed to capture microfibres released from clothing during the washing cycle. In this study, we compared 6 different devices which varied from prototypes to commercially available products. These were designed to either be placed inside the drum during the washing cycle or fitted externally to filter the effluent wastewater discharge. The aim of this study was to examine the efficacy of these devices at mitigating microfibre release from clothing during washing or at capturing any microfibres released in the wastewater. When compared to the amount of microfibres entering the wastewater without any device (control), the XFiltra filter was the most successful device. This device captured microfibres reducing their release to wastewater by around 78%. The Guppyfriend bag was the second most successful device, reducing microfibre release to wastewater by around 54%; it appeared to mainly work by reducing microfibre shedding from the clothing during the washing cycle. Despite some potentially promising results it is important to recognise that fibres are also released when garments are worn in everyday use. Researchers and industry need to continue to collaborate to better understand the best intervention points to reduce microfibre shedding, by considering both product design and fibre capture.

Bioavailability of Microplastics to Marine Zooplankton: Effect of Shape and Infochemicals

The underlying mechanisms that influence microplastic ingestion in marine zooplankton remain poorly understood. Here, we investigate how microplastics of a variety of shapes (bead, fiber, and fragment), in combination with the algal-derived infochemicals dimethyl sulfide (DMS) and dimethylsulfoniopropionate (DMSP), affect the ingestion rate of microplastics in three species of zooplankton, the copepods Calanus helgolandicus and Acartia tonsa and larvae of the European lobster Homarus gammarus. We show that shape affects microplastic bioavailability to different species of zooplankton, with each species ingesting significantly more of a certain shape: C. helgolandicus-fragments (P < 0.05); A. tonsa-fibers (P < 0.01); H. gammarus larvae-beads (P < 0.05). Thus, different feeding strategies between species may affect shape selectivity. Our results also showed significantly increased ingestion rates by C. helgolandicus on all microplastics that were infused with DMS (P < 0.01) and by H. gammarus larvae and A. tonsa on DMS-infused fibers and fragments (P < 0.05). By using a range of more environmentally relevant microplastics, our findings highlight how the feeding strategies of different zooplankton species may influence their susceptibility to microplastic ingestion. Furthermore, our novel study suggests that species reliant on chemosensory cues to locate their prey may be at an increased risk of ingesting aged microplastics in the marine environment.

Evaluating scenarios toward zero plastic pollution

Plastic pollution is a pervasive and growing problem. To estimate the effectiveness of interventions to reduce plastic pollution, we modeled stocks and flows of municipal solid waste and four sources of microplastics through the global plastic system for five scenarios between 2016 and 2040. Implementing all feasible interventions reduced plastic pollution by 40% from 2016 rates and 78% relative to “business as usual” in 2040. Even with immediate and concerted action, 710 million metric tons of plastic waste cumulatively entered aquatic and terrestrial ecosystems. To avoid a massive build-up of plastic in the environment, coordinated global action is urgently needed to reduce plastic consumption; increase rates of reuse, waste collection, and recycling; expand safe disposal systems; and accelerate innovation in the plastic value chain.

In vitro avian bioaccessibility of metals adsorbed to microplastic pellets

Microplastics are known to be associated with co-contaminants, but little is understood about the mechanisms by which these chemicals are transferred from ingested plastic to organisms. This study simulates marine avian gastric conditions in vitro to examine the bioaccessibility of authigenic metals (Fe, Mn) and trace metals (Co, Pb) that have been acquired by polyethylene microplastic pellets from their environment. Specifically, different categories of pellet were collected from beaches in Cornwall, southwest England, and exposed to an acidified saline solution of pepsin (pH ∼ 2.5) at 40 °C over a period of 168 h with extracted metal and residual metal (available to dilute aqua regia) analysed by ICP-MS. For Fe, Mn and Co, kinetic profiles consisted of a relatively rapid initial period of mobilisation followed by a more gradual approach to quasi-equilibrium, with data defined by a diffusion model and median rate constants ranging from about 0.0002 (μg L^-1)^-1 h^-1 for Fe to about 7 (μg L^-1)^-1 h^-1 for Co. Mobilisation of Pb was more complex, with evidence of secondary maxima and re-adsorption of the metal to the progressively modified pellet surface. At the end of the time-courses, maximum total concentrations were 38.9, 0.81, 0.014 and 0.10 μg g^-1 for Fe, Mn, Co and Pb, respectively, with maximum respective percentage bioaccessibilities of around 60, 80, 50 and 80. When compared with toxicity reference values for seabirds, the significance of metals acquired by microplastics from the environment and exposed to avian digestive conditions is deemed to be low, but studies of a wider range of plastics and metal associations (e.g. as additives) are required for a more comprehensive risk assessment.

Plastic Debris in the Marine Environment: History and Future Challenges

The success of plastic as a material has shaped the development of modern society and challenged older materials in many of their established uses. However, plastic is now a major component of litter and is extensively reported within the marine environment. Impacts from plastic debris have been identified as a major global conservation issue with implications for maritime industries, tourism, marine life, and human health. Although there are many benefits of plastic, it is clear that society's relationship and reliance on plastics needs to be addressed. Conversely, alternative materials to replace plastic items, or solutions mitigating plastic release, also need to be critiqued to make sure their properties and environmental impacts are more beneficial. This review examines the history and impact of plastics in the marine environment. Current solutions that aim to mitigate plastics accumulation in the environment and the future challenges of plastic as a material are also discussed.

Occurrence and assemblage composition of intertidal non-native species may be influenced by shipping patterns and artificial structures

Habitat modification coupled with the spread of non-native species (NNS) are among the top threats to marine biodiversity globally. Species are known to be transported to new locations via international shipping and secondarily spread via regional vessels and artificial structures. Rapid Assessment Surveys (RAS) combining quantitative and semi-quantitative methods compared NNS richness and assemblage composition on intertidal natural rocky shores and artificial structures in harbours in different regions along the south coast of England. Quantitative data showed that artificial habitats supported higher richness than natural habitats, while semi-quantitative data found no difference in richness among habitat types. This result was attributed to additional species found in rock pools during searches of complex microhabitats in natural habitats. Assemblages on artificial structures differed among regions, with regions and harbours with greater numbers of vessels supporting greater richness. Results highlight the importance of shipping and artificial structures for NNS introduction and spread.

Tyre wear particles: an abundant yet widely unreported microplastic?

Owing to their physical and chemical properties, particles generated by the abrasion of tyre tread against road surfaces, or tyre wear particles, are recognised as microplastics. Recent desk-based studies suggest tyre wear to be a major contributor of microplastic emissions to the environment. This study aimed to quantify tyre wear in roadside drains and the natural environment near to a major road intersection. Tyre particles were identified by visual identification and a subsample confirmed as tyre wear by GC-MS using N-cyclohexyl-2-benzothiazolamine (NCBA) as a marker. The abundance of tyre wear within roadside drains was greater in areas associated with increased braking and accelerating than that with high traffic densities (p = < 0.05). Tyre particle abundance in the natural environment ranged from 0.6 ± 0.33 to 65 ± 7.36 in 5 mL of material, with some evidence of decline with distance from the road. This study offers preliminary data regarding the generation and abundance of this under-researched microplastic.

Metals and marine microplastics: Adsorption from the environment versus addition during manufacture, exemplified with lead

There are two means by which metals associate with microplastics in the aquatic environment. Firstly, they may be adsorbed to the plastic surface or hydrogenous-biogenic accumulations thereon, and secondly, they may be present in the polymeric matrix as functional additives or as reaction or recyclate residues. In this study, the relative significance of these associations is evaluated with respect to Pb in beached marine microplastics. Thus, adsorbed Pb was determined in <5 mm, neutrally-coloured polyethylene pellets that contained no detectable Pb added during manufacture by digestion in dilute aqua regia, while the bioaccessibility of this association was evaluated using an avian physiologically-based extraction test (PBET). Here, up to about 0.1 μg g^-1 of Pb was adsorbed to the plastic and between about 60 and 70% of the metal was accessible. Lead present as additive or residue was determined by x-ray fluorescence analysis of a wider range of beached plastics (polyolefins and polyvinyl chloride), with a selection of positive samples grated to mm-dimensions and subjected to the PBET. Here, total Pb concentrations up to 40,000 μg g^-1 and bioaccessibilities up to 16% were observed, with bioaccessible concentrations exceeding equivalent values for adsorbed Pb by several orders of magnitude. Ingestive exposure to Pb, and potentially other toxic metals, is more important through the presence of additives in historical plastics and recyclate residues in contemporary plastics than from adsorption, and it is recommended that future studies focus more on the environmental impacts and fate of metals bound in this form.

Microplastics in sea ice and seawater beneath ice floes from the Arctic Ocean

Within the past decade, an alarm was raised about microplastics in the remote and seemingly pristine Arctic Ocean. To gain further insight about the issue, microplastic abundance, distribution and composition in sea ice cores (n = 25) and waters underlying ice floes (n = 22) were assessed in the Arctic Central Basin (ACB). Potential microplastics were visually isolated and subsequently analysed using Fourier Transform Infrared (FT-IR) Spectroscopy. Microplastic abundance in surface waters underlying ice floes (0–18 particles m⁻³) were orders of magnitude lower than microplastic concentrations in sea ice cores (2–17 particles L⁻¹). No consistent pattern was apparent in the vertical distribution of microplastics within sea ice cores. Backward drift trajectories estimated that cores possibly originated from the Siberian shelves, western Arctic and central Arctic. Knowledge about microplastics in environmental compartments of the Arctic Ocean is important in assessing the potential threats posed by microplastics to polar organisms.

Microfiber Release to Water, Via Laundering, and to Air, via Everyday Use: A Comparison between Polyester Clothing with Differing Textile Parameters

Textiles are one of the major sources of microplastic pollution to aquatic environments and have also been reported in dry and wet atmospheric deposition. There is still a lack of information on the direct release of microfibers from garments to the air and on the influence of textile characteristics including structure, type of yarn, and twist. The present study examines microfiber emissions directly to the air and to water as a consequence of laundering. Polyester garments with different textile characteristics were examined including various material compositions, fabric structure, yarn twist, fiber type, and hairiness. Scaling up our data indicates release of microfibers per person per year to the air is of a similar order of magnitude to that released to wastewater by laundering. The lowest releases to both air and water were recorded for a garment with a very compact woven structure and highly twisted yarns made of continuous filaments, compared with those with a looser structure (knitted, short staple fibers, lower twist). Our results demonstrate for the first time that direct release of microfibers from garments to air as a consequence of wear is of equal importance to releases to water. Currently there is considerable interest in interventions focused on capture from wastewater. However, our results suggest more effective interventions are likely to result from changes in textile design that could reduce emissions to both air and water.

Quantification and characterisation of microplastics ingested by selected juvenile fish species associated with mangroves in KwaZulu-Natal, South Africa

Though the number studies on microplastic ingestion by fish is growing, data on fish species characteristic of the South African coastline are scarce. This study quantified and characterised (physically and chemically) microplastics ingested by four species of juvenile fish (viz. Oreochromis mossambicus [Peters, 1852], Terapon jarbua [Forsskål, 1775], Ambassis dussumieri [Cuvier, 1828] and Mugil sp.), within four mangroves along the east coast of South Africa. Microplastics were isolated from whole fish using a proteinase K digestion method, and then quantified and characterised in terms of shape, chemical nature (plastic type), colour and length. Fibres (68%) and fragments (21%) were the dominant shapes found. Of the 174 fish sampled, 52% contained microplastic particles, with 0.79 ± 1.00 particles per fish. The average number of particles per fish did not differ significantly across species within sites and across sites but was higher than in juvenile fish of other species sampled in oceanic habitats. The main plastic types collected using 10 μm filters and identified with Fourier Transform Infrared Spectroscopy (FTIR), were rayon (70.4%), polyester (10.4%), nylon (5.2%) and polyvinylchloride (3.0%). Particle length ranged from 0.1 to 4.8 mm, averaging 0.89 ± 0.77 mm, but irrespective of length, particles were mostly blue in colour. This study provides evidence that juvenile fish inhabiting mangroves are consuming significant quantities of microplastics. Importantly, it should be noted that rayon, though the most abundant plastic type found, is a semi-synthetic fibre made from regenerated cellulose that is commonly reported in studies of this nature. The habitats studied serve as nurseries for numerous fish species; however, more detailed studies are needed to assess whether microplastic ingestion could compromise the health of these fish or whether these effects are dependent on species, feeding habit and/or plastic type.

Design catalogue for eco-engineering of coastal artificial structures: a multifunctional approach for stakeholders and end-users

Coastal urbanisation, energy extraction, food production, shipping and transportation have led to the global proliferation of artificial structures within the coastal and marine environments (sensu “ocean sprawl”), with subsequent loss of natural habitats and biodiversity. To mitigate and compensate impacts of ocean sprawl, the practice of eco-engineering of artificial structures has been developed over the past decade. Eco-engineering aims to create sustainable ecosystems that integrate human society with the natural environment for the benefit of both. The science of eco-engineering has grown markedly, yet synthesis of research into a user-friendly and practitioner-focused format is lacking. Feedback from stakeholders has repeatedly stated that a “photo user guide” or “manual” covering the range of eco-engineering options available for artificial structures would be beneficial. However, a detailed and structured “user guide” for eco-engineering in coastal and marine environments is not yet possible; therefore we present an accessible review and catalogue of trialled eco-engineering options and a summary of guidance for a range of different structures tailored for stakeholders and end-users as the first step towards a structured manual. This work can thus serve as a potential template for future eco-engineering guides. Here we provide suggestions for potential eco-engineering designs to enhance biodiversity and ecosystem functioning and services of coastal artificial structures with the following structures covered: (1) rock revetment, breakwaters and groynes composed of armour stones or concrete units; (2) vertical and sloping seawalls; (3) over-water structures (i.e., piers) and associated support structures; and (4) tidal river walls.

An evaluation of the Fishing For Litter (FFL) scheme in the UK in terms of attitudes, behavior, barriers and opportunities

Marine litter is a global, persistent, and increasing threat to the oceans, and numerous initiatives aim to address this challenge. Fishing For Litter (FFL) is a voluntary clean-up scheme, where litter is collected as part of routine fishing operations. We surveyed fishers (n = 97) and stakeholders (n = 22) in the UK to investigate perceptions of FFL, its strengths and weaknesses, and potential co-benefits of the scheme. Fishers reported being aware of and concerned about the negative impacts of litter. Overall, FFL was evaluated very positively (7.85/10). In addition, FFL fishers reported less environmentally harmful waste management behaviors both out at sea and in other contexts than did non-FFL fishers. Fishers and stakeholders listed strengths and weaknesses of the scheme and made suggestions for future changes. As well as directly helping to remove litter, this paper demonstrates that clean-up schemes can make a contribution to addressing the underlying causes of marine pollution.

Environmental Deterioration of Biodegradable, Oxo-biodegradable, Compostable, and Conventional Plastic Carrier Bags in the Sea, Soil, and Open-Air Over a 3-Year Period

There is clear evidence that discarded single-use carrier bags are accumulating in the environment. As a result, various plastic formulations have been developed which state they deteriorate faster and/or have fewer impacts on the environment because their persistence is shorter. This study examined biodegradable, oxo-biodegradable, compostable, and high-density polyethylene (i.e., a conventional plastic carrier bag) materials over a 3 year period. These materials were exposed in three natural environments; open-air, buried in soil, and submersed in seawater, as well as in controlled laboratory conditions. In the marine environment, the compostable bag completely disappeared within 3 months. However, the same compostable bag type was still present in the soil environment after 27 months but could no longer hold weight without tearing. After 9 months exposure in the open-air, all bag materials had disintegrated into fragments. Collectively, our results showed that none of the bags could be relied upon to show any substantial deterioration over a 3 year period in all of the environments. It is therefore not clear that the oxo-biodegradable or biodegradable formulations provide sufficiently advanced rates of deterioration to be advantageous in the context of reducing marine litter, compared to conventional bags.

The rise in ocean plastics evidenced from a 60-year time series

Plastic production has increased exponentially since its use became widespread in the 1950s. This has led to increased concern as plastics have become prevalent in the oceanic environment, and evidence of their impacts on marine organisms and human health has been highlighted. Despite their prevalence, very few long-term (>40 years) records of the distribution and temporal trends of plastics in the world's oceans exist. Here we present a new time series, from 1957 to 2016 and covering over 6.5 million nautical miles, based on records of when plastics have become entangled on a towed marine sampler. This consistent time series provides some of the earliest records of plastic entanglement, and is the first to confirm a significant increase in open ocean plastics in recent decades.

A catchment-scale perspective of plastic pollution

Plastic pollution is distributed across the globe, but compared with marine environments, there is only rudimentary understanding of the distribution and effects of plastics in other ecosystems. Here, we review the transport and effects of plastics across terrestrial, freshwater and marine environments. We focus on hydrological catchments as well-defined landscape units that provide an integrating scale at which plastic pollution can be investigated and managed. Diverse processes are responsible for the observed ubiquity of plastic pollution, but sources, fluxes and sinks in river catchments are poorly quantified. Early indications are that rivers are hotspots of plastic pollution, supporting some of the highest recorded concentrations. River systems are also likely pivotal conduits for plastic transport among the terrestrial, floodplain, riparian, benthic and transitional ecosystems with which they connect. Although ecological effects of micro- and nanoplastics might arise through a variety of physical and chemical mechanisms, consensus and understanding of their nature, severity and scale are restricted. Furthermore, while individual-level effects are often graphically represented in public media, knowledge of the extent and severity of the impacts of plastic at population, community and ecosystem levels is limited. Given the potential social, ecological and economic consequences, we call for more comprehensive investigations of plastic pollution in ecosystems to guide effective management action and risk assessment. This is reliant on (a) expanding research to quantify sources, sinks, fluxes and fates of plastics in catchments and transitional waters both independently as a major transport routes to marine ecosystems, (b) improving environmentally relevant dose-response relationships for different organisms and effect pathways, (c) scaling up from studies on individual organisms to populations and ecosystems, where individual effects are shown to cause harm and; (d) improving biomonitoring through developing ecologically relevant metrics based on contemporary plastic research.

Characterising the deterioration of different plastics in air and seawater

In situ studies of plastic deterioration can help us understand the longevity of macroplastic as well as the generation of microplastics in the environment. Photo-oxidation contributing to the generation of microplastics in the marine environment was explored using four types of plastic (polyethene, polystyrene, poly(ethylene terephthalate) and Biothene® exposed in light and in shade, in both air and sea water. Metrics for deterioration were tensile extensibility and oxidation rate. Measurements were conducted at intervals between 7 and 600 days' exposure. Deterioration was faster in air than in sea water and was further accelerated in direct light compared to shade. Extensibility and oxidation were significantly inversely correlated in samples exposed in air. Samples in sea water lost extensibility at a slower rate. Polystyrene, which enters the waste stream rapidly due to its wide application in packaging, deteriorated fastest and is, therefore, likely to form microplastics more rapidly than other materials, especially when exposed to high levels of irradiation, for example when stranded on the shore.

Exposure to microplastics reduces attachment strength and alters the haemolymph proteome of blue mussels (Mytilus edulis)

The contamination of marine ecosystems with microplastics, such as the polymer polyethylene, a commonly used component of single-use packaging, is of global concern. Although it has been suggested that biodegradable polymers, such as polylactic acid, may be used to replace some polyethylene packaging, little is known about their effects on marine organisms. Blue mussels, Mytilus edulis, have become a "model organism" for investigating the effects of microplastics in marine ecosystems. We show here that repeated exposure, over a period of 52 days in an outdoor mesocosm setting, of M. edulis to polyethylene microplastics reduced the number of byssal threads produced and the attachment strength (tenacity) by ∼50%. Exposure to either type of microplastic altered the haemolymph proteome and, although a conserved response to microplastic exposure was observed, overall polyethylene resulted in more changes to protein abundances than polylactic acid. Many of the proteins affected are involved in vital biological processes, such as immune regulation, detoxification, metabolism and structural development. Our study highlights the utility of mass spectrometry-based proteomics to assess the health of key marine organisms and identifies the potential mechanisms by which microplastics, both conventional and biodegradable, could affect their ability to form and maintain reefs.

Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris

The accumulation of plastic litter in natural environments is a global issue. Concerns over potential negative impacts on the economy, wildlife, and human health provide strong incentives for improving the sustainable use of plastics. Despite the many voices raised on the issue, we lack a consensus on how to define and categorize plastic debris. This is evident for microplastics, where inconsistent size classes are used and where the materials to be included are under debate. While this is inherent in an emerging research field, an ambiguous terminology results in confusion and miscommunication that may compromise progress in research and mitigation measures. Therefore, we need to be explicit on what exactly we consider plastic debris. Thus, we critically discuss the advantages and disadvantages of a unified terminology, propose a definition and categorization framework, and highlight areas of uncertainty. Going beyond size classes, our framework includes physicochemical properties (polymer composition, solid state, solubility) as defining criteria and size, shape, color, and origin as classifiers for categorization. Acknowledging the rapid evolution of our knowledge on plastic pollution, our framework will promote consensus building within the scientific and regulatory community based on a solid scientific foundation.

Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris

The accumulation of plastic litter in natural environments is a global issue. Concerns over potential negative impacts on the economy, wildlife, and human health provide strong incentives for improving the sustainable use of plastics. Despite the many voices raised on the issue, we lack a consensus on how to define and categorize plastic debris. This is evident for microplastics, where inconsistent size classes are used and where the materials to be included are under debate. While this is inherent in an emerging research field, an ambiguous terminology results in confusion and miscommunication that may compromise progress in research and mitigation measures. Therefore, we need to be explicit on what exactly we consider plastic debris. Thus, we critically discuss the advantages and disadvantages of a unified terminology, propose a definition and categorization framework, and highlight areas of uncertainty. Going beyond size classes, our framework includes physicochemical properties (polymer composition, solid state, solubility) as defining criteria and size, shape, color, and origin as classifiers for categorization. Acknowledging the rapid evolution of our knowledge on plastic pollution, our framework will promote consensus building within the scientific and regulatory community based on a solid scientific foundation.

Bioavailability and effects of microplastics on marine zooplankton: A review

Microplastics are abundant and widespread in the marine environment. They are a contaminant of global environmental and economic concern. Due to their small size a wide range of marine species, including zooplankton can ingest them. Research has shown that microplastics are readily ingested by several zooplankton taxa, with associated negative impacts on biological processes. Zooplankton is a crucial food source for many secondary consumers, consequently this represents a route whereby microplastic could enter the food web and transfer up the trophic levels. In this review we aim to: 1) evaluate the current knowledge base regarding microplastic ingestion by zooplankton in both the laboratory and the field; and 2) summarise the factors which contribute to the bioavailability of microplastics to zooplankton. Current literature shows that microplastic ingestion has been recorded in 39 zooplankton species from 28 taxonomic orders including holo- and meroplanktonic species. The majority of studies occurred under laboratory conditions and negative effects were reported in ten studies (45%) demonstrating effects on feeding behaviour, growth, development, reproduction and lifespan. In contrast, three studies (14%) reported no negative effects from microplastic ingestion. Several physical and biological factors can influence the bioavailability of microplastics to zooplankton, such as size, shape, age and abundance. We identified that microplastics used in experiments are often different to those quantified in the marine environment, particularly in terms of concentration, shape, type and age. We therefore suggest that future research should include microplastics that are more representative of those found in the marine environment at relevant concentrations. Additionally, investigating the effects of microplastic ingestion on a broader range of zooplankton species and life stages, will help to answer key knowledge gaps regarding the effect of microplastic on recruitment, species populations and ultimately broader economic consequences such as impacts on shell- and finfish stocks.

Uptake, Whole-Body Distribution, and Depuration of Nanoplastics by the Scallop Pecten maximus at Environmentally Realistic Concentrations

Previous studies of uptake and effects of nanoplastics by marine organisms have been conducted at what may be unrealistically high concentrations. This is a consequence of the analytical challenges in tracking plastic particles in organisms at environmentally relevant concentrations and highlights the need for new approaches. Here, we present pulse exposures of ¹⁴C-radiolabeled nanopolystyrene to a commercially important mollusk, Pecten maximus, at what have been predicted to be environmentally relevant concentrations (<15 μg L^-1). Uptake was rapid and was greater for 24 nm than for 250 nm particles. After 6 h, autoradiography showed accumulation of 250 nm nanoplastics in the intestine, while 24 nm particles were dispersed throughout the whole-body, possibly indicating some translocation across epithelial membranes. However, depuration was also relatively rapid for both sizes; 24 nm particles were no longer detectable after 14 days, although some 250 nm particles were still detectable after 48 days. Particle size thus apparently influenced the biokinetics and suggests a need for chronic exposure studies. Modeling extrapolations indicated that it could take 300 days of continued environmental exposure for uptake to reach equilibrium in scallop body tissues although the concentrations would still below 2.7 mg g^-1. Comparison with previous work in which scallops were exposed to nonplastic (silver) nanomaterials of similar size (20 nm), suggests that nanoparticle composition may also influence the uptake tissue distributions somewhat.

Plastics, the Environment and Society: Current Consensus and Future Directions

In less than 60 years, plastics have transformed our daily lives. Usage is increasing and now exceeds 330 million tonnes per annum. In this concluding chapter we summarise current understanding about the benefits and concerns of plastics usage and look to future priorities, challenges and opportunities. It is clear that plastics bring many societal benefits and offer the potential for further advances in medical and technological applications, as well as carbon reductions. However, it is also widely acknowledged that current production, use and disposal of plastics is not sustainable. Our understanding of the issues associated with end of life plastics has increased considerably over the last decade. It is now clear that plastic debris has accumulated on a global scale and is present in considerable quantities even in remote locations such as the arctic and deep sea. Plastic debris is frequently encountered by wildlife, often with harmful if not fatal consequences. There are emerging concerns about the impacts of nanosized plastic fragments and preliminary evidence that large items of litter can have negative consequences for human wellbeing. Public and policy interest in the topic is unprecedented and funding is being made available to address the issue. However, while the suite of potential solutions is well recognised, there is no one size fits all solution. In the current thirst for action, a major challenge is matching the most appropriate solutions to particular aspects of the problem. In addition, we need to consider the role of society and the processes of social perception and influence amongst a range of actors. This is critical because, unless the efficacy of solutions is properly evidenced and understood, there is a significant risk that interventions taken in haste will not be socially acceptable and/or may lead to unintended negative consequences.

The imprint of microfibres in southern European deep seas

Pollution of the marine environment by large and microscopic plastic fragments and their potential impacts on organisms has stimulated considerable research interest and has received widespread publicity. However, relatively little attention has been paid to the fate and effects of microplastic particles that are fibrous in shape, also referred as microfibres, which are mostly shed from synthetic textiles during production or washing. Here we assess composition and abundance of microfibres in seafloor sediments in southern European seas, filling gaps in the limited understanding of the long-range transport and magnitude of this type of microplastic pollution. We report abundances of 10–70 microfibres in 50 ml of sediment, including both natural and regenerated cellulose, and synthetic plastic (polyester, acrylic, polyamide, polyethylene, and polypropylene) fibres. Following a shelf-slope-deep basin continuum approach, based on the relative abundance of fibres it would appear that coastal seas retain around 33% of the sea floor microfibres, but greater quantities of the fibres are exported to the open sea, where they accumulate in sediments. Submarine canyons act as preferential conduits for downslope transport of microfibres, with 29% of the seafloor microfibres compared to 18% found on the open slope. Around 20% of the microfibres found had accumulated in the deep open sea beyond 2000m of water depth. The remoteness of the deep sea does not prevent the accumulation of microfibres, being available to become integrated into deep sea organisms.