The effect of ultrasonic and multisonic irrigation on root canal microbial communities: An ex vivo study

AIM

To analyse the effect of ultrasonic irrigant activation (UIA) and the GentleWave (GW) multisonic irrigation (GW) with minimal instrumentation on the root canal microbial diversity in an ex vivo model that used extracted molars with a history of pulp necrosis.

METHODOLOGY

Twenty-three mandibular molars were prepared ex vivo for collection of superficial (surface control), pre-treatment and post-treatment samples 24 h after extraction. Samples were divided into two groups: UIA using 6% NaOCl (n = 11) and GW group (n = 12). All samples were processed using quantitative real-time polymerase chain reaction (qPCR) and 16S rRNA next-generation sequencing to measure microbial diversity before and after the antimicrobial treatment. For qPCR, a t-test (α = .05) was used to compare the log10 reduction. The Chao1 and Shannon indices evaluated alpha diversity. Differences in community composition (beta diversity) were evaluated by analysis of similarity (ANOSIM). Kruskal-Wallis test with Bonferroni corrections was performed to evaluate the differences in abundances genera in the samples.

RESULTS

Quantitative real-time polymerase chain reaction revealed an estimated 1.6 and 2.6 log10 reduction for UIA and GW groups respectively (p = .048). An average of 5 ± 4 and 3 ± 5 operational taxonomic units (OTUs) were found in surface's samples in the UIA and GW group respectively. These values were significantly lower (p < .001) compared to the number of preoperative OTUs in those groups (155 ± 79 and 187 ± 121). In assessing beta diversity, there were no significant differences found in pre-treatment samples (R = .090, p = .070 ANOSIM with Bonferroni corrections). Also, no significant differences in community composition were observed in post-treatment samples (R = -.05, p = .829). After treatment, there was a significant reduction of Eubacterium using conventional treatment with UIA and a significant reduction of Prevotella using minimal instrumentation with GW irrigation (p = .007 and p = .002 respectively).

CONCLUSION

Quantitative PCR analysis revealed a significant reduction in microbial load for GW group. Overall, diversity changes were similar between UIA and GW irrigation in this ex vivo model that used extracted teeth with a history of pulp necrosis. OTUs obtained from the surface sample were negligible and did not affect the statistical outcome of the study.

Load capacity and fracture modes of instrumented tooth roots under axial compression

OBJECTIVE

To investigate the influences of root canal instrumentation on the load capacity and fracture modes of tooth roots under axial compression by performing mechanical tests and finite element analysis (FEA).

METHODS

Thirty bovine incisor roots were trimmed into cylinders of 5.0 mm diameter. They were randomly divided into two groups, one with root canals instrumented to ∼2.0 mm in diameter, and one without instrumentation. The specimens were fractured under uniaxial compression at a crosshead speed of 0.2 mm/min, and then micro-CT was used to reveal the fracture patterns in three dimensions. FEA was further performed, using the extended finite element method (XFEM), to compare the compression-induced stress distributions and the initiation and propagation of root fractures in both groups.

RESULTS

The mean fracture load of the non-instrumented group (2334 ± 436 N) was statistically significantly higher than that of the instrumented group (1857 ± 377 N) (p < 0.01). Three types of root fractures were identified according to the path and length of the cracks: end-face crack, partial-length crack, and full-length crack. As to the fracture modes, the incidence of partial-length root fracture was the highest in both groups (60% for the non-instrumented group and 53.3% for the instrumented group), followed by that of full-length fracture (26.7% and 40%, respectively) and then end-face fracture (13.3% and 6.7%, respectively). The percentage of full-length fracture was slightly higher in the instrumented group. FEA showed that the compression induced higher Tresca stresses but lower maximum principal stresses in the canal walls of the instrumented group. The XFEM simulations predicted that the fracture of both groups initiated from the outer root surface near an end face and propagated axially to the middle third of the root and radially towards the root canal. These numerical results agreed well with our experimental findings.

SIGNIFICANCE

Within the limitation of this study, it was found that root canal instrumentation could significantly decrease the load capacity of tooth roots and potentially increase their susceptibility to full-length root fracture under uniaxial compression.

Anatomical complexities affecting root canal preparation: a narrative review

A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.

Exploring the Root Canal Microbiome in Previously Treated Teeth: A Comparative Study of Diversity and Metabolic Pathways Across Two Geographical Locations

AIM

To analyze and compare the root canal microbiome present in root-filled teeth of two different geographical populations, and to study their functional potential using next-a generation sequencing approach.

METHODOLOGY

Sequencing data obtained from surgical specimens from previously treated teeth with periapical bone loss from Spain and USA were included in the study. Taxa were classified using SILVA v.138 database. Differences in genera abundances among the 10 most abundant genera were evaluated using a Kruskal-Wallis test. Alpha diversity indices were calculated in mothur. The Shannon and Chao1 indices were used. Analyses of similarity (ANOSIM) to determine differences in community composition were done in mothur, with Bonferroni correction for multiple comparisons. P values < 0.05 were considered statistically significant. Identification of enriched bacteria function prediction in the study groups (Kegg pathways) was carried out by Linear discriminant analysis Effect Size (LEfSe) via Python 3.7.6.

RESULTS

A greater alpha-diversity (Shannon and Chao1 indices) was observed from samples obtained in Spain (P = 0.002). Geography showed no significant effects on community composition via an ANOSIM using Bray-Curtis dissimilarities (R = 0.03, P = 0.21). Bacterial functional analysis prediction obtained by PICRUSt showed that 5.7% KEGG pathways differed between the Spain and USA samples.

CONCLUSIONS

The taxonomic assessment alone does not fully capture the microbiome's differences from two different geographical locations. Carbohydrate and amino acid metabolism were enriched in samples from Spain, while samples from the USA had a higher representation of pathways related to nitrogen, propanoate metabolism, and secretion systems.

The Root Canal Microbiome Diversity and Function. A Whole- Metagenome Shotgun analysis

AIM

Evaluate the root canal microbiome composition and bacterial functional capability in cases of primary and secondary apical periodontitis utilizing whole-metagenome shotgun sequencing.

METHODOLOGY

Twenty-two samples from patients with primary root canal infections, and eighteen samples obtained from previously treated teeth currently diagnosed with apical periodontitis were analyzed with whole metagenome shotgun sequencing at a depth of 20M reads. Taxonomic and functional gene annotations were made using MetaPhlAn3 and HUMAnN3 software. The Shannon and Chao1 indices were utilized to measure alpha diversity. Differences in community composition were evaluated utilizing analysis of similarity (ANOSIM) using Bray-Curtis dissimilarities. The Wilcoxon rank sum test was used to compare differences in taxa and functional genes.

RESULTS

Microbial community variations within a community were significantly lower in secondary relative to primary infections (alpha diversity P = 0.001). Community composition was significantly different in primary versus secondary infection (R = 0.11, P = 0.005). The predominant taxa observed among samples (>2.5%) were Pseudopropionibacterium propionicum, Prevotella oris, Eubacterium infirmum, Tannerella forsythia, Atopobium rimae, Peptostreptococcus stomatis, Bacteroidetes bacterium oral taxon 272, Parvimonas micra, Olsenella profusa, Streptococcus anginosus, Lactobacillus rhamnosus, Porphyromonas endodontalis, Pseudoramibacter alactolyticus, Fusobacterium nucleatum, Eubacterium brachy and Solobacterium moorei. The Wilcoxon rank test revealed no significant differences in relative abundances of functional genes in both groups. Genes with greater relative abundances (top 25) were associated with genetic, signaling and cellular processes including the iron and peptide/nickel transport system. Numerous genes encoding toxins were identified: exfoliative toxin, hemolysins, thiol- activated cytolysin, phospholipase C, cAMP factor, sialidase, and hyaluronic glucosaminidase.

CONCLUSIONS

Despite taxonomic differences between primary and secondary apical periodontitis, the functional capability of the microbiomes was similar.

Taxonomic abundance in primary and secondary root canal infections

AIM

To evaluate the root canal microbiome composition in cases of primary and secondary apical periodontitis.

METHODOLOGY

Thirty-nine samples from patients with primary root canal infections obtained before root canal treatment, and 40 samples obtained during root-end resection procedures from previously filled cases with apical periodontitis were evaluated using 16S rRNA next-generation sequencing analysis (NGS). Demographic and clinical factors included age, sex, infection type, percussion sensitivity, and presence of pain. Differences in abundances of genera were evaluated using Kruskal-Wallis test. Alpha and beta diversity indices were calculated using mothur. The Shannon and Chao1 indices were used to measure alpha diversity. The Bray-Curtis dissimilarity was used to measure beta diversity. Differences in community composition were evaluated using analysis of similarity (ANOSIM) with Bonferroni correction for multiple comparisons.

RESULTS

Significantly fewer operational taxonomic units values were observed from samples from secondary infections (p < .0001). While no significant differences were observed in the Chao 1 index between primary and secondary infections, the Shannon alpha diversity was significantly lower in secondary relative to primary infections (p = .008). Among samples, sex, age (adult vs. older adult), percussion sensitivity, and presence of pain all showed no significant effects on community composition via an analysis of similarity (ANOSIM). However, community composition was significantly different depending on whether the sample was from a primary or secondary infection (R = .051, p = .03). Nine microbial genera comprised the predominant taxa observed among samples (>3.3%) and included Parvimonas, Fusobacterium, Campylobacter, Arachnia, Eubacterium, Prevotella, Peptostreptococcus, Fretibacterirum, and Pseudoramibacter. Significantly greater relative abundances of Prevotella, Peptostreptococcus, Veillonella, Lactucaseibacillus, and Dialister were observed in primary infections.

CONCLUSIONS

Primary endodontic infections are more diverse than secondary infections. The microbial composition is not associated with the clinical manifestations of apical periodontitis.

Minimal Detectable Width of Tooth Fractures Using Magnetic Resonance Imaging and Method to Measure

INTRODUCTION

Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation. This investigation aimed to describe the narrowest VRFs detectable based on MRI, using micro-computed tomography (microCT) as the reference standard and proposes a method using profile integrals to measure the widths of small VRFs.

METHODS

VRFs were induced in 62 RCT tooth root samples. All samples were imaged in a phantom using MRI and reference imaging was obtained using microCT. The stacks of 3-dimensional axial MRIs were assessed by 3 board-certified endodontists. Evaluators determined the most coronal slice within the stack that was discernible as the extent of the VRF. This slice was measured on correlated microCT sections to determine the minimum VRF width (μm) detectable using a profile integral-based method to measure small fractures and negate the effects of the point spread function.

RESULTS

Using profile integrals to measure VRF width was repeatable and resulted in estimates that were on average 1 μm smaller than known reference widths. Adjusted median VRF width detected using MRI was 45 μm (first quartile: 26 μm, third quartile: 64 μm).

CONCLUSION

Using profile integrals is a valid way to estimate small VRF width. The MRI approach demonstrated ability to repeatedly detect VRFs as small as 26 μm.

Present status and future directions of intracanal medicaments

Two fundamental goals of endodontic treatment are to prevent or treat apical periodontitis. From a predictive perspective, several variables can affect the outcome of root canal treatment. Some of these variables depend on intraoperative factors, which include irrigation technique, size of the apical preparation, use of intracanal medicaments or the number of appointments necessary to complete the treatment. However, the outcome may also be affected by host and microbial factors. The intensity of periradicular bone loss or tissue damage, the presence of preoperative pain and associated conditions such as mechanical allodynia and central sensitization, the anatomical complexity of the apical portion of the canal, and the virulence and longevity of the bacterial infection can all have a profound influence on the outcome. Furthermore, numerous medical conditions have been reported to decrease the capability of the immune system to heal the periapical tissues. It is the clinician's responsibility to analyse these variables and incorporate them into the disinfection strategy to maximize the chances of healing. This narrative review will focus on the present status of intracanal medicaments, the clinical indications for their use and future directions for research.

A critical analysis of research methods and experimental models to study the load capacity and clinical behavior of the root filled teeth

The prognosis of root‐filled teeth depends not only on a successful root canal treatment but also on the restorative prognosis. This critical review discusses the advantages and limitations of various methodologies used to assess the load capacity or clinical survivability of root‐filled teeth and restorations. These methods include static loading, cyclic loading, finite element analysis and randomized clinical trials. In vitro research is valuable for preclinical screening of new dental materials or restorative modalities. It also can assist investigators or industry to decide whether further clinical trials are justified. It is important that these models present high precision and accuracy, be reproducible, and present adequate outcomes. Although in vitro models can reduce confounding by controlling important variables, the lack of clinical validation (accuracy) is a downside that has not been properly addressed. Most importantly, many in vitro studies did not explore the mechanisms of failure and their results are limited to rank different materials or treatment modalities according to the maximum load capacity. An extensive number of randomized clinical trials have also been published in the last years. These trials have provided valuable insight on the survivability of the root‐filled tooth answering numerous clinical questions. However, trials can also be affected by the selected outcome and by intrinsic and extrinsic biases. For example, selection bias, loss to follow‐up and confounding. In the clinical scenario, hypothesis‐based studies are preferred over observational and retrospective studies. It is recommended that hypothesis‐based studies minimize error and bias during the design phase.

PRESS and Piezo MicroSurgery (Bony Lid): A Seven Year Evolution in a Residency Program Part 2: PRESS- defined site location

INTRODUCTION

Treatment of a failing endodontic procedure via microsurgical revision presents better outcomes due, in part, to the integration of the Surgical Operating Microscope (SOM) and CBCT into clinical practice. But challenges still remain with respect to the operational locations and the techniques required to address them. Posterior sites, with substantial cortical plate thicknesses and sensitive anatomy, present the dichotomy of visualization versus post-surgical regeneration of bone. The bony lid technique bridges the gap between these two concepts, and the application of Piezosurgery renders a precise and biocompatible osseous incision. The purpose of this paper is to outline, through Case reports, the progression of Piezo-Guided surgery in a resident setting.

METHODS

The first two evolutions of the technique utilized a surgeon-defined method for site location. This third and final evolution utilizes a digital workflow to virtually plan the surgical procedure, integrating STL and DICOM files to create 3-dimensional guides with exacting resection locations, levels, and angles. Export of the virtually planned guide in post-production generates the Precision Endodontic Surgical Stent (PRESS) to accurately define the site location and parameters of the procedure. All surgeries were executed using the Piezosurgical method with increasing levels of guidance and precision throughout the evolution process.

RESULTS

Each step in the technique implementation enabled the resident to assimilate a new technique and skill set while maintaining bone architecture and minimizing volume loss post-operatively. The patient benefits were an increase in intra-operative safety and post-operative comfort. The resident benefits were accelerated regeneration timetables, increase in the confidence level of the resident and number of scheduled posterior surgical procedures.

CONCLUSIONS

The progression from crude on-site measurements to elegant and precise surgical guides enabled the access and manipulations of difficult surgical sites without compromising visibility, post-operative osseous regeneration, or patient comfort.

Fatigue analysis of restored teeth longitudinally cracked under cyclic loading

OBJECTIVE

To investigate the fatigue behavior of restored teeth, in particular the mechanisms of longitudinal dentinal cracking under cyclic mechanical loading, using finite element analysis (FEA) and the stress-life (S-N) approach.

METHODS

Ten root-filled premolars restored with resin composites were subjected to step-stress cyclic loading to produce longitudinal cracks. Fracture loads and number of cycles completed at each load level were recorded. FEA was used to predict the stress amplitude of each component under the global cyclic load. Both intact and debonded conditions were considered for the dentin-composite interface in the FEA. The predicted stress concentrations were compared with the fracture patterns to help elucidate the failure mechanisms. The S-N approach was further used to predict the lifetimes of the different components in the restored teeth. Cumulative fatigue damage was represented by the sum of the fractions of life spent under the different stress amplitudes.

RESULTS

Longitudinal cracks were seen in ~50% of the samples with a mean fracture load of 770 ± 45 N and a mean number of cycles to failure of 32,297 ± 12,624. The longitudinal dentinal cracks seemed to start near the line angle of the cavity, and propagated longitudinally towards the root. The sum of fractions of life spent for the dentin-composite interface exceeded 1 after ~7000 cycles when that for dentin was much lower than 1, indicating that interfacial debonding would occur prior to dentin fracture. This was supported by micro-CT images showing widened interfacial space in the cracked samples. In the debonded tooth, FEA showed dentinal stress concentrations at the gingival wall of the cavity, which coincided with the longitudinal cracks found in the cyclic loading test. The sum of fractions of life spent for dentin was close to 1 at ~30,000 cycles, similar to the experimental value.

SIGNIFICANCE

Debonding of the dentin-composite interface may occur prior to longitudinal cracking of dentin in root-filled teeth under cyclic loading. The approximate time of occurrence for these events could be estimated using fatigue analysis with stresses provided by FEA. This methodology can therefore be used to evaluate the longevity of restoration designs for root-filled teeth.

Influence of minimally invasive endodontic access cavities and bonding status of resin composites on the mechanical property of endodontically-treated teeth: A finite element study

OBJECTIVE

To study the mechanical behavior of endodontically-treated teeth with minimally invasive endodontic access cavities and resin composite restorations under different bonding conditions using finite element analysis (FEA).

METHODS

Four Class-II endodontic access cavities including the mesio-occlusal minimally-invasive (MO-MIE), mesio-occlusal conventional (MO-CONV), disto-occlusal minimally-invasive (DO-MIE), and disto-occlusal conventional (DO-CONV) cavities were prepared in 3D-printed maxillary first molars. Each tooth was subjected to root canal preparation and scanned using micro-CT to provide a 3D structural model which was virtually restored with resin composite. An intact 3D-printed molar was used as control. FEA was conducted under a 250-N vertical load. Three different interfacial bonding conditions between dentin/enamel and resin composite were considered, i.e. fully bonded, partially debonded, and fully debonded. The maximum principal stress of dentin and the normal tensile stress at the interfaces were recorded. The risk factor of failure for each component was then calculated.

RESULTS

In the fully-bonded tooth, the dentin-composite interface showed significantly higher stress and a higher risk factor than dentin, indicating that debonding at the dentin-composite interface would occur prior to dentin fracture. With the dentin-composite interface debonded, the enamel-composite interface exhibited higher stress and a higher risk factor than dentin, indicating that debonding at the enamel-composite interface would occur next, also prior to dentin fracture. With the resin composite fully debonded from the tooth, stress in dentin increased significantly. Irrespective of the bonding status, the CONV groups exhibited higher median stresses in dentin than the MIE groups.

SIGNIFICANCE

Within the limitation of this study, it was shown that debonding of the resin composite restoration increased the stress in dentin and hence the risk of dentin fracture in endodontically-restored teeth. Minimally-invasive access cavities could better safeguard the fracture resistance of interproximally-restored teeth compared to conventional ones.

Efficacy of four local anaesthesia protocols for mandibular first molars with symptomatic irreversible pulpitis: A randomized clinical trial

AIM

To examine the efficacy rate of four anaesthetic protocols in mandibular first molars with symptomatic irreversible pulpitis (SIP).

METHODOLOGY

One hundred and sixty patients with a diagnosis of SIP were included in this randomized clinical trial. Patients were randomly allocated into four treatment groups (N = 40) according to the administered technique: Group 1 (IANB): standard inferior alveolar nerve block (IANB) injection; Group 2 (IANB + IO): standard IANB followed by a supplemental intraosseous infusion (IO) injection; Group 3 (IANB + PDL): standard IANB followed by a supplemental periodontal ligament (PDL) injection; Group 4 (IANB + BI): standard IANB followed by a supplemental buccal infiltration. Patients rated pain intensity using a verbal rating scale when the root canal treatment procedure was initiated, that is, during caries removal, access preparation and pulpectomy. Heart rate changes were recorded before, during and after each injection. The anaesthetic efficacy rates were analysed using chi-square tests, age differences using one-way anova, gender differences using Fischer Exact tests whilst heart rate changes were analysed using Kruskal-Wallis tests. Statistical significances were set at p < .05 level.

RESULTS

All the included patients were analysed. No differences in the efficacy rate were found in relation to the age or gender of the participants amongst the study groups (p > .05). IANB + IO injections had a significantly higher efficacy rate (92.5%) when compared to other techniques (p < .05), followed by IANB + PDL injections (72.5%), IANB + BI injections (65.0%), with no significant differences between the IANB + PDL or IANB + BI injections (p > .05). IANB injection alone had a significantly lower rate (40%) compared to the other techniques (p < .05). A transient but significant rise in the heart rate was recorded in 60% (24/40) of patients who received the IANB + IO injection compared to other groups (p < .05).

CONCLUSIONS

Inferior alveolar nerve block injection alone did not reliably permit pain-free treatment for mandibular molars with SIP. The use of an additional IO supplemental injection provided the most effective anaesthesia for patients requiring emergency root canal treatment for SIP in mandibular posterior teeth.

Prevalence of periapical lesions, root canal treatments and restorations in teeth adjacent to implant- or tooth-supported crowns: A multi-centre cross-sectional study

AIM

To describe the prevalence of periapical lesions, root canal treatments and coronal restorations on teeth adjacent to either implant- or natural tooth-supported crowns using cone-beam computed tomography (CBCT) assessment compared to nonadjacent teeth.

METHODOLOGY

A total of 1249 CBCT volumes were screened by five pre-calibrated observers in 11 health centres. A step-by-step screening protocol was implemented and reviewed every 3 months, and mandatory setting characteristics were established for all CBCT scans using dedicated visualization software. Intra- and inter-rater reliability tests were conducted. The prevalence of periapical lesions, root canal treatments and coronal restorations was recorded on both teeth adjacent and nonadjacent to implant- (predictor 1) or natural tooth-supported crowns (predictor 2). A binary logistic model (Generalizing Estimating Equations test) was used to verify whether the prevalence of periapical lesion, root canal filling and the tooth restorative status are altered when the assessed tooth is adjacent or not to an implant-supported crown (predictor 1); or to a natural tooth-supported crown (predictor 2). Odds ratio and confidence intervals for the dependent variables at both predictors were obtained. The significance level was set at .05.

RESULTS

A global sample of 22 899 teeth was included. Compared to nonadjacent teeth, the prevalence of periapical lesion, root canals treatments and restorative procedures when adjacent to implant-supported crowns was 10.7%, 19.6% and 22.9% higher, respectively, and when adjacent to tooth-supported crowns was 19.3%, 35.6% and 37.4% higher respectively. These results were significant only for variables root canal filling and coronal restoration (p < .0001). Odds ratio to present root canal treatment is 2.57 times higher (CI 1.95-3.39, p = .0001) when the tooth is adjacent to implant-supported crown and 4.39 times (CI 3.49-5.53, p = .0001) when adjacent to tooth-supported crown, whilst for restorative procedure, the odds are, respectively, 1.63 (CI 1.29-2.06, p = .0001) and 2.30 (CI 1.92-2.76, p = .0001).

CONCLUSIONS

Teeth adjacent to both implant- and natural tooth-supported crowns were associated with a higher frequency of root canal filling and coronal restorations.

Preoperative Factors Associated with Anesthesia Failure for Patients Undergoing Nonsurgical Root Canal Therapy: A National Dental Practice-Based Research Network Study

INTRODUCTION

The aim of this study was to identify preoperative factors associated with local anesthesia failure.

METHODS

The National Dental Practice-Based Research Network (www.NationalDentalPBRN.org) data from 534 patients who received a nonsurgical root canal treatment completed in a single appointment were included in this analysis. Three methods for defining anesthesia failure were used: definition 1, patient-reported level of numbness; definition 2, provider-reported quality of anesthesia; and definition 3, provider-reported use of supplemental anesthesia. Fifty-one preoperative factors were investigated and analyzed individually against the overall failure rate for each method, and multivariate generalized estimating equation logistic models were fit with predictors chosen using stepwise model selection to evaluate factors that may interact with each other.

RESULTS

The overall anesthesia failure rates were 5%, 15%, and 30% for definitions 1, 2, and 3, respectively. Provider experience, diabetes, absence of sharp or aching pain, absence of smoking, and a fair expected outcome were associated with anesthesia failure (definition 1). Provider level of training, absence of a sinus tract, bite sensitivity, and stress making the pain worse were associated with anesthesia failure (definition 2). Provider level of training, pain provoked by stimulus, mandibular teeth, teeth with vital pulps, and pain interfering with daily activities were associated with the use of supplemental anesthesia (definition 3).

CONCLUSIONS

With the range of 5%-30% of anesthesia failures, a few common factors across the models assessed were elucidated. Providers with higher levels of training had significantly fewer anesthesia failures. Patient self-reported history of diabetes and preoperative pain-related interference with daily activities were associated with more anesthesia failures. Greater severity of various tooth-related pain characteristics, as a group but not individually, accounted for more anesthesia failures.

The effect of rotary instrumentation on dentin thickness in the danger zone of the MB2 canal of maxillary first molars

The aim of this study was to measure the initial and remaining dentin thickness in the danger zone of the second mesiobuccal (MB2) canal of maxillary first molars after rotary instrumentation using cone beam computed tomography (CBCT) imaging. After determining initial dentin thickness, each sample was subjected to a standardized protocol of rotary instrumentation files: ProTaper Gold Sx Orifice Opener (maximum depth of 7 mm); Vortex Blue 15.04, 20.04, 25.04, ProTaper Gold S1, S2, F1, F2, and finally Vortex Blue 30.06. Subsequent CBCT measurements were made to compare changes in remaining dentin thickness in comparison to initial presentation. Preoperative dentin thickness in the danger zone had a mean of 0.82 ± 0.17mm. Significant levels of dentin removal in the danger zone were noted after all instrumentation groups when compared to the pre-instrumentation mean (Sx P < 0.001, 25.04 P < 0.0006, F2 P < 0.0001, 30.06 P < 0.0001). It was concluded that a thin area of dentin exists along the distal wall of the MB2 (danger zone) from the furcation to 4 mm apically.

PRILE 2021 guidelines for reporting laboratory studies in Endodontology: explanation and elaboration

Guidance to authors is needed to prevent their waste of talent, time and resources in writing manuscripts that will never be published in the highest-quality journals. Laboratory studies are probably the most common type of endodontic research projects because they make up the majority of manuscripts submitted for publication. Unfortunately, most of these manuscripts fail the peer-review process, primarily due to critical flaws in the reporting of the methods and results. Here, in order to guide authors, the Preferred Reporting Items for study Designs in Endodontology (PRIDE) team developed new reporting guidelines for laboratory-based studies: the Preferred Reporting Items for Laboratory studies in Endodontology (PRILE) 2021 guidelines. The PRILE 2021 guidelines were developed exclusively for the area of Endodontology by integrating and adapting the modified CONSORT checklist of items for reporting in vitro studies of dental materials and the Clinical and Laboratory Images in Publications (CLIP) principles. The process of developing the PRILE 2021 guidelines followed the recommendations of the Guidance for Developers of Health Research Reporting Guidelines. The aim of the current document is to provide authors with an explanation for each of the items in the PRILE 2021 checklist and flowchart with examples from the literature, and to provide advice from peer-reviewers and editors about how to solve each problem in manuscripts prior to their peer-review. The Preferred Reporting Items for study Designs in Endodontology (PRIDE) website (http://pride-endodonticguidelines.org/prile/) provides a link to the PRILE 2021 explanation and elaboration document as well as to the checklist and flowchart.

PRILE 2021 guidelines for reporting laboratory studies in Endodontology: A consensus-based development

Reproducible, skilfully conducted and unbiased laboratory studies provide new knowledge, which can inform clinical research and eventually translate into better patient care. To help researchers improve the quality and reproducibility of their research prior to a publication peer-review, this paper describes the process that was followed during the development of the Preferred Reporting Items for Laboratory studies in Endodontology (PRILE) 2021 guidelines and which used a well-documented consensus-based methodology. A steering committee was created with eight individuals (PM, RO, OP, IR, JS, EP, JJ and SP), plus the project leaders (PD, VN). The steering committee prepared an initial checklist by combining and adapting items from the modified Consolidated Statement of Reporting Trials checklist for reporting in vitro studies of dental materials and the Clinical and Laboratory Images in Publications principles as well as adding several new items. The steering committee then formed a PRILE Delphi Group (PDG) and PRILE Online Meeting Group (POMG) to provide expert advice and feedback on the initial draft checklist and flowchart. The members of the PDG participated in an online Delphi process to achieve consensus on the items within the PRILE 2021 checklist and the accompanying flowchart for clarity and suitability. The PRILE checklist and flowchart developed by the online Delphi process were discussed further by the POMG. This online meeting was conducted on 12 February 2021 via the Zoom platform. Following this meeting, the steering committee developed a final version of the PRILE 2021 guidelines and flowchart, which was piloted by several authors when writing up a laboratory study for publication. Authors are encouraged to use the PRILE 2021 guidelines and flowchart to improve the clarity, completeness and quality of reports describing laboratory studies in Endodontology. The PRILE 2021 checklist and flowchart are freely available and downloadable from the Preferred Reporting Items for study Designs in Endodontology website (http://pride-endodonticguidelines.org/prile/).

Laboratory simulation of longitudinally cracked teeth using the step-stress cyclic loading method

AIM

To simulate in a laboratory setting longitudinal cracking in root filled premolar teeth, using cyclic mechanical fatigue.

METHODOLOGY

Mesial-occlusal-distal (MOD) cavities were prepared in twenty root filled, single-rooted, mandibular premolars restored with fibre posts and resin composites. The samples were randomly divided into two groups based on the loading approaches: static loading with a crosshead speed of 0.5 mm/min and step-stress cyclic loading (1 Hz) with increasing amplitude. The loads and numbers of cycles to failure were recorded. Micro-CT was also used to identify the fracture modes. Statistical analysis was performed using Student's t-test. The level of significance was set at 0.05.

RESULTS

The mean fracture loads for the static loading and cyclic loading groups were 769 ± 171 N and 720 ± 92 N, respectively. There was no significant difference between the two groups (P > 0.05). The proportions of longitudinal, cuspal and mixed-mode fractures under cyclic loading were 50%, 20% and 30%, respectively. Longitudinal fractures occurred with larger numbers of cycles and higher average loads per cycle compared with the other fractures. Static loading produced only cuspal fractures.

CONCLUSIONS

Longitudinally cracked premolar teeth with root fillings were successfully produced using the step-stress cyclic loading method. This provides a more clinically representative methodology for studying cracked teeth in a laboratory setting.

In vitro apical pressure created by 2 irrigation needles and a multisonic system in mandibular molars

Objectives

The aim of this study was to evaluate the apical pressure generated by 2 endodontic irrigation needles and the GentleWave system in mandibular molars.

Materials and Methods

The mesial and distal root canals of 12 mandibular molars were irrigated with a 30-gauge close-end needle or with a 30-gauge open-end needle. Procedures were performed in the mesial and distal canals. The GentleWave procedure and irrigation at 1 mm from the apex in the distal roots using an open-end needle were used, respectively, as negative and positive controls. The apical pressure was measured using a data acquisition pressure setup. Apical pressure exerted by the different needles in the 2 different canal types was statistically compared using 2-way analysis of variance.

Results

Significant differences were found in the apical pressure for both needles and the canal type. The lowest values were obtained with close-end needles and in mesial canals. Negative apical pressure values were obtained using GentleWave.

Conclusions

The needle and the canal type influenced the apical pressure. The GentleWave procedure produced negative apical pressure.

Intra- and Interobserver Agreement during the Assessment of the Different Stages of Root Development Using 4 Radiographic Classifications

INTRODUCTION

This study analyzed intra- and interobserver agreements during radiographic assessment of the different stages of root development using the dichotomous, Moorrees, Demirjian, and Cvek classifications, as well as the effect of the observer's level of experience on the result.

METHODS

Two hundred eighty-five digital periapical radiographs were examined via visual inspection by 3 experienced and 3 nonexperienced observers (n = 6) under strict technological and viewing conditions. After observer calibration, determination of the presence or absence of an open apex and the assignment of a root development stage according to the different subdivisions of the 4 indexes were performed. This evaluation was carried out by each observer in duplicate in the first round (n = 8) and repeated in the second round (n = 8). The 16 examinations performed by each observer (N = 96) were analyzed to determine the percentage of concordance followed by intraobserver, interobserver, and global observer agreement using the kappa coefficient and a weighted kappa. Additionally, to determine the level of concordance between the visual determination of an open or closed apex and the apical foramen width measured in millimeters, a dichotomized kappa coefficient was applied.

RESULTS

A good level of global observer agreement was found for the dichotomous, Demirjian, and Cvek classifications. However, a significantly low percentage of total concordance and global observer agreement (6.66% and 0.498, respectively) was obtained using the Moorrees classification, which was more pronounced among nonexperienced observers (0.247). Apical foramen width measurements indicated the presence of 143 roots with an open apex (50.2%) and 142 with a closed apex (49.8%), and the dichotomized kappa coefficient test revealed a good level of agreement during the visual determination of an open or closed apex (range, 0.611-0.636).

CONCLUSIONS

The classifications of Cvek and Demirjian provided reliable results when determining the different stages of root development. In contrast, the Moorrees classification provided the lowest agreement values, with a significant negative effect among nonexperienced observers. Finally, the visual estimation of the presence (or absence) of an open apex provided a good level of concordance with the radiographic apical foramen width.

Osteosarcoma of the anterior maxilla mimicking a periapical pathology: A case report

Osteosarcomas of the jaws (OSJ) are difficult to diagnose, rare malignant lesions, with uncharacteristic radiographic and clinical presentation. Early diagnosis and treatment are essential to improve long-term prognosis. The current report presents a rare case of a primary conventional osteoblastic osteosarcoma of the anterior maxilla in a 25-year-old female. She presented to a private dental clinic after developing pain, facial oedema and palpation tenderness of a mass associated with the upper right lateral incisor. The signs and symptoms mimicked very closely a regular radiolucent and symptomatic periapical pathology, and the definitive diagnosis was only possible through a combination of clinical, radiographic and histopathological findings. The patient was referred to an oncology facility, where she was submitted to radical excision surgery through a hemi-maxillectomy. Although other pathologies are uncommon, the differential diagnosis of lesions compatible with odontogenic periapical pathology should not be neglected.

In Vitro Comparison of Porcelain Fused to Metal Crown Retention after Endodontic Access and Subsequent Restoration: Composite, Amalgam, Amalgam with Composite Veneer, and Fiber Post with Composite

INTRODUCTION

The aim of this study was to evaluate the effect of different access opening restorative materials on crown retention.

METHODS

Thirty-eight extracted molars were mounted in resin and prepared for porcelain fused to metal (PFM) crowns. The crowns were fabricated and cemented with zinc phosphate, and the force to displace it was measured with a tensile-testing machine before and after endodontic access preparations. The endodontic access area, crown preparation axial wall, and preparation surface area were measured for comparison. The crowns were then recemented, and access openings were restored with either amalgam or composite before displacement force was remeasured. The restorative material was removed from each access opening; access area was measured and restored again (amalgam with composite or fiber post with composite) for displacement force to be remeasured. Paired t test was used to compare the means of displacement between groups. One-way analysis of variance was used to compare the mean outcome measure within the groups.

RESULTS

Statistical analyses showed retention after unfilled access was significantly lower than intact crowns. Amalgam, composite, amalgam + composite, and fiber post + composite increased retention beyond the original value. There was no statistical difference among the different restorative protocols. Qualitative results indicate that the restorative material remains in the crown after displacement regardless of the material used to restore the access.

CONCLUSIONS

The results from this study suggest that an endodontic access cavity decreases retention of a PFM crown. However, subsequent restoration with amalgam, composite, amalgam + composite, or post + composite may increase the original retention of the crown.

Postoperative Pain after Treatment Using the GentleWave System: A Randomized Controlled Trial

INTRODUCTION

Cleaning and shaping are necessary to allow for the delivery of irrigants and medicaments to the apical third of the canal. Standard treatment irrigation generally uses a conventional needle and some frequency of sonic activation. The GentleWave System (GWS; Sonendo, Inc, Laguna Hills, CA) combines irrigant delivery with multisonic activation. This randomized clinical trial aimed to determine if the GWS significantly decreases the incidence and intensity of postoperative pain.

METHODS

Patients used a numeric rating scale to record their pain level at the 6-hour time point before treatment. All participants were randomly divided into 2 groups and were blind to the treatment they received. The standard (control) group received endodontic treatment with conventional side-vented needle irrigation and ultrasonic activation. The second group received treatment with the GWS. Following treatment, patients used a numeric rating scale to record their pain level at 6, 24, 72, and 168 hours.

RESULTS

In the standard treatment group, 72.2% of patients experienced at least 1 occurrence of postoperative pain, whereas in the GWS group, 83.3% of patients experienced at least 1 occurrence of postoperative pain. The highest pain intensity level for both treatments occurred at the 6-hour posttreatment time point. All pain decreased with time after the 6-hour posttreatment time point (P < 1.237e-7).

CONCLUSIONS

There was no significant difference in the incidence or intensity of postoperative pain after either treatment group. However, both groups reported a statistically significant decrease in pain with time.

The MB3 canal in maxillary molars: a micro-CT study

OBJECTIVES

To assess the internal and external morphologies of the mesiobuccal (MB) root of maxillary molars presenting a third root canal (MB3), using micro-computed tomography (micro-CT).

MATERIAL AND METHODS

Two-hundred and sixty-five extracted maxillary first and second molars with different root configurations were imaged in a micro-CT scanner at 19.6-μm pixel size. Sixteen teeth presenting MB3 canal were selected and evaluated regarding root configuration, minimal dentine thickness 2 mm under the furcation area, canal configuration of the MB root, MB3 canal morphology (location, independent or confluent orifice, and anatomy types), and the apical anatomy (aspect ratio, number of accessory canals and foramina, presence of isthmus, and independent MB3 foramen).

RESULTS

Overall, a high variability in canal configuration was detected in the MB root. MB3 canal was observed in 10 maxillary first molars and 6 maxillary second molars (n = 16). Minimal dentine thickness related to the MB3 canal at the coronal third was smaller than that of the MB1 canal. A complex internal anatomy comprising 13 different root canal configurations was observed. A high number of independent MB3 orifices at the pulp chamber floor was observed in the first molars (7 out of 10 teeth), while most of the specimens (n = 14) showed a confluent anatomy of the MB3 canal. A varied number of accessory canals and foramina were observed. At the apical third, isthmus could be observed in 6 specimens, while an independent MB3 foramen was present in 37.5% of the MB roots.

CONCLUSIONS

MB3 canal is a rare anatomical variation present in maxillary first and second molars. Its presence can be associated to a complex internal anatomy of the MB root which includes the presence of isthmuses and multiple accessory canals and foramina at the apical third, but also a thin dentine thickness at the coronal third and a confluent anatomy of the MB3 with the other main canals.

Apical root canal anatomy in the mesiobuccal root of maxillary first molars: influence of root apical shape and prevalence of apical foramina - a micro-CT study

AIM

To determine whether a relationship exists between the apical shape of roots and root canal system complexity by performing a micro-computed tomography analysis.

METHODOLOGY

One hundred extracted permanent maxillary first molars were scanned using a micro-computed tomography device at 19.6 μm voxel size. Two groups of mesiobuccal roots were formed according to the root aspect ratio value in the apical 3-mm cross-sectional level ('<2 and ≥ 2.00'). Data were recorded regarding the number and presence of accessory canals and their location, isthmus, presence of the mesiobuccal canal and dentine thickness. Depending on the analysed variable, Mann-Whitney U test and Z-test for proportions were used to compare groups. The significant level was set at 5%.

RESULTS

Mesiobuccal roots with an aspect ratio ≥ 2.00 at the apical 3-mm cross-sectional level had higher percentages of accessory canals, apical foramina and MB2 root canals in the apical 3 mm. The vertical average distance from the accessory foramina and origin from the anatomic apex was 1.40 and 2.19 mm, respectively. Overall, 21.8% of the accessory canals had their origin coronal to a 3-mm root resection line. There was no difference between the groups regarding dentine thickness.

CONCLUSION

The shape of the apical 3 mm of maxillary first molar mesiobuccal roots was a predictive factor for the presence of complex root canal systems. Roots with a lower aspect ratio had less complex apical anatomy.

Micro-CT study of the root canal anatomy of maxillary canines

Background

This study aimed to describe the anatomy of maxillary canines from a Western Mexican sub-population using micro-computed tomography (micro-CT).

Material and Methods

Maxillary canines (n=32) were scanned at 19.6µm voxel resolution. Number and location of canals, the distance between the cemento-enamel junction and apex, occurrence of accessory and lateral canals, presence of oval canals, number of foraminas as well as two- (area, perimeter, roundness, aspect ratio, major and minor diameters) and three-dimensional (volume, surface area, and SMI) analysis were performed. Data of two-dimensional analyses at 5 different apical levels was statistically compared using Kruskal-Wallis tests (α=0.05).

Results

Overall, 31 specimens had one root with a main canal (Vertucci type I). Mean distance from the apex to the cemento-enamel junction was 16.32±2.27. Apical foraminas were present in 14 specimens (43.75%). No statistical differences were found in the two-dimensional analyses between the foramen and the 1 and 2mm apical levels (P >0.05).

Conclusions

Maxillary canines presenting one root canal were present in a high percentage of cases (96%). The prevalence of long oval canals was <12% at the apical third and at least 37% of the sample showed more than one point of exit in the last apical 3mm.

Key words:Maxillary canine, micro-computed tomography, root canal anatomy.

Prevalence and morphometric analysis of three-rooted mandibular first molars in a Brazilian subpopulation

The knowledge of the internal anatomy of three-rooted mandibular molars may help clinicians to diagnose and plan the root canal treatment in order to provide adequate therapy when this variation is present.

Effects of Dentin Debris on the Antimicrobial Properties of Sodium Hypochlorite and Etidronic Acid

INTRODUCTION

The purpose of this study was to determine the influence of dentin powder on the concentration, pH, and antimicrobial activity of sodium hypochlorite (NaOCl) alone and combined with etidronic acid (HEBP).

METHODS

Biofilms of Enterococcus faecalis were grown on the surface of dentin blocks for 5 days and then exposed to 1% and 2.5% NaOCl alone or combined with 9% HEBP for 3 minutes in the absence and presence of dentin powder. The biovolumes of the biofilm were measured using confocal microscopy and the live/dead technique. The available chlorine and pH of the solutions were also measured. Nonparametric tests were used to determine statistical differences (P < .05).

RESULTS

The presence of dentin powder resulted in a reduction of the free available chlorine and pH in all the irrigating solutions; 1% NaOCl lost its antimicrobial activity completely in the presence of dentin powder. The antimicrobial activity was significantly reduced in the 2.5% NaOCl and 1% NaOCl/HEBP groups, and it was not affected in the 2.5% NaOCl/HEBP group.

CONCLUSIONS

The presence of dentin powder significantly decreased the available chlorine and antimicrobial activity of 1% NaOCl, 2.5% NaOCl, and 1% NaOCl/HEBP irrigating solutions. The antimicrobial activity of 2.5% NaOCl/HEBP was not affected by the dentin powder after a 3-minute contact time against E. faecalis biofilms.

Comparative accuracy of the Clearing Technique, CBCT and Micro-CT methods in studying the mesial root canal configuration of mandibular first molars

AIMS

To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard.

METHODOLOGY

Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 μm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 μm and 150 μm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%.

RESULTS

Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05).

CONCLUSION

Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.

Experimental Calcium Silicate-Based Cement with and without Zirconium Oxide Modulates Fibroblasts Viability

The aim of this study was to verify whether the use of zirconium oxide as a radiopacifier of an experimental calcium silicate-based cement (WPCZO) leads to cytotoxicity. Fibroblasts were treated with different concentrations (10 mg/mL, 1 mg/mL, and 0.1 mg/mL) of the cements diluted in Dulbecco's modified Eagle's medium (DMEM) for periods of 12, 24, and 48 h. Groups tested were white Portland cement (WPC), white Portland cement with zirconium oxide (WPCZO), and white mineral trioxide aggregate Angelus (MTA). Control group cells were not treated. The cytotoxicity was evaluated through mitochondrial-activity (MTT) and cell-density (crystal violet) assays. All cements showed low cytotoxicity. In general, at the concentration of 10 mg/mL there was an increase in viability of those groups treated with WPC and WPCZO when compared to the control group (p<0.05). A similar profile for the absorbance values was noted among the groups: 10 mg/mL presented an increase in viability compared to the control group. On the other hand, smaller concentrations presented a similar or lower viability compared to the control group, in general. A new dental material composed of calcium silicate-based cement with 20% zirconium oxide as the radiopacifier showed low cytotoxicity as a promising material to be exploited for root-end filling.

Antifungal activity of 4% chlorhexidine and 2% sodium hypochlorite against Candida albicans biofilms

The purpose of this study was to determine the antifungal efficacy of 4% chlorhexidine (CHX) and 2% sodium hypochlorite (NaOCl) on 24-hour Candida albicans biofilms. Candida albicans biofilms were developed on acrylic resin specimens, which were randomly assigned to 1 of 5 groups (n = 3 per group) exposed to 1 mL of 4% CHX for 2, 4, 6, 8, or 10 minutes. Biofilms in contact with 1 mL of distilled water or 2% NaOCl for 10 minutes were used as positive and negative controls (n = 3 per group), respectively. Specimens were analyzed with confocal laser scanning microscopy and a cell viability assay technique. The biovolume of the live subpopulation of the biofilm was calculated with biofilm image analysis software. Statistically significant differences (P < 0.05) in the biovolume of surviving cells were found among the positive control group and the 4-, 6-, 8-, and 10-minute experimental periods. The biovolumes found after 6-10 minutes of exposure to chlorhexidine were significantly different (P < 0.05) from the biovolume after 2 minutes of exposure. The most effective decrease of the biovolume was found after the use of the negative control (sodium hypochlorite) solution. Exposure to 10 minutes of 2% NaOCl removed fungal cells more effectively than all the experimental groups (P < 0.05). The 4% CHX solution showed an antifungal activity against C albicans biofilms but failed to decrease the biovolume to the levels of 2% NaOCl, which eliminated viable cells more effectively and appeared to be more effective in disrupting the attached biofilms.

Analysis of the reaction of subcutaneous tissues in rats and the antimicrobial activity of calcium hydroxide paste used in association with different substances

The aim of this study was to evaluate the subcutaneous tissue response in rats and the antimicrobial activity of intracanal calcium hydroxide dressings mixed with different substances against E. faecalis. Fifty four rats were divided into three experimental groups according to the vehicle in the calcium hydroxide treatment: 0.4% chlorohexidine in propylene glycol (PG), Casearia sylvestris Sw in PG and calcium hydroxide+PG (control group). The pastes were placed into polyethylene tubes and implanted into the subcutaneous tissue. After 7, 14 and 30 days, the samples were processed and histologically evaluated (hematoxylin and eosin). The tissue surface in contact with the material was analyzed, and the quantitative analysis determined the volume density occupied by the inflammatory infiltrate (giant cells, polymorphonuclear cells and mononuclear cells), fibroblasts, collagen fibers and blood vessels. For the antimicrobial analysis, 20 dentin blocks infected with E. faecalis were treated with calcium hydroxide pastes in different vehicles; 0.4% chlorhexidine in PG, PG, extract from Casearia sylvestris Sw in PG and a positive control (infection and without medication) for 7 days. The efficiency of the pastes was evaluated by the live/dead technique and confocal microscopy. The results showed that 0.4% chlorhexidine induced a higher inflammatory response than the other groups. The Casearia sylvestris Sw extract showed satisfactory results in relation to the intensity of the inflammatory response. In the microbiological test, there were no statistical differences between the evaluated intracanal dressings and the percentage of bacterial viability was between 33 and 42%. The control group showed an 86% viability. Antimicrobial components such as chlorhexidine or Casearia sylvestris Sw did not improve the antimicrobial activity against E. faecalis in comparison to the calcium hydroxide+PG treatment. In addition, the incorporation of chlorhexidine in the calcium hydroxide paste promoted the highest inflammatory response.

Influence of bismuth oxide concentration on the pH level and biocompatibility of white Portland cement

Objectives

To investigate if there is a relation between the increase of bismuth oxide and the decrease of pH levels and an intensification of toxicity in the Portland cement.

Material and Methods

White Portland cement (WPC) was mixed with 0, 15, 20, 30 and 50% bismuth oxide, in weight. For the pH level test, polyethylene tubes were filled with the cements and immersed in Milli-Q water for 15, 30 and 60 days. After each period, the increase of the pH level was assessed. For the biocompatibility, two polyethylene tubes filled with the cements were implanted in ninety albino rats (n=6). The analysis of the intensity of the inflammatory infiltrate was performed after 15, 30 and 60 days. The statistical analysis was performed using the Kruskal-Wallis, Dunn and Friedman tests for the pH level and the Kruskal-Wallis and Dunn tests for the biological analysis (p<0.05).

Results

The results showed an increase of the pH level after 15 days, followed by a slight increase after 30 days and a decrease after 60 days. There were no significant statistical differences among the groups (p>0.05). For the inflammatory infiltrates, no significant statistical differences were found among the groups in each period (p>0.05). The 15% WPC showed a significant decrease of the inflammatory infiltrate from 15 to 30 and 60 days (p<0.05).

Conclusions

The addition of bismuth oxide into Portland cement did not affect the pH level and the biological response. The concentration of 15% of bismuth oxide resulted in significant reduction in inflammatory response in comparison with the other concentrations evaluated.

Micro-computed tomographic analysis of the root canal morphology of the distal root of mandibular first molar

INTRODUCTION

The aim of this study was to evaluate the morphologic aspects of the root canal anatomy of the distal root of a mandibular first molar using micro-computed tomographic analysis.

METHODS

One-hundred distal roots of mandibular first molars were scanned using a micro-computed tomographic device at an isotropic resolution of 19.6 μm. The percentage frequency distribution of the morphologic configuration of the root canal was performed according to the Vertucci classification system. Two-dimensional parameters (area, perimeter, roundness, aspect ratio, and major and minor diameters) and the cross-sectional shape of the root canal were analyzed in the apical third at every 1-mm interval from the main apical foramen in roots presenting Vertucci types I and II configurations (n = 79). Data were statistically compared using the Kruskal-Wallis and Dunn tests with a significance level set at 5%.

RESULTS

Seventy-six percent of the distal roots had a single root canal. Two, three, and four canals were found in 13%, 8%, and 3% of the sample, respectively. In 13 specimens, the configuration of the root canal did not fit into Vertucci's classification. Overall, 2-dimensional parameter values significantly increased at the 3-mm level (P < .05). The prevalence of oval canals was higher at the 1-mm level and decreased at the 5-mm level in which long oval and flattened canals were more prevalent.

CONCLUSIONS

The distal roots of the mandibular first molars showed a high prevalence of single root canals. The prevalence of long oval and flattened canals increased in the coronal direction. In 13% of the samples, canal configurations that were not included in Vertucci's configuration system were found.