Electrophoretic Deposition of 58S Bioactive Glass- Polymer Composite Coatings on 316L Stainless Steel: An Optimization for Corrosion, Bioactivity, and Cytocompatibility

This study presents a facile fabrication of 58S bioactive glass (BG)-polymer composite coatings on a 316L stainless steel (SS) substrate using the electrophoretic deposition technique. The suspension characteristics and deposition kinetics of BG, along with three different polymers, namely ethylcellulose (EC), poly(acrylic acid) (PAA), and polyvinylpyrrolidone (PVP), have been utilized to fabricate the coatings. Among all coatings, 58S BG and EC polymers are selected as the final composite coating (EC6) owing to their homogeneity and good adhesion. EC6 coating exhibits a thickness of ∼18 μm and an average roughness of ∼2.5 μm. Herein, EC6 demonstrates better hydroxyapatite formation compared to PAA and PVP coatings in simulated body fluid-based mineralization studies for a period of 28 days. Corrosion studies of EC6 in phosphate-buffered saline further confirm the higher corrosion resistance properties after 14 days. In vitro cytocompatibility studies using human placental mesenchymal stem cells demonstrate an increase in cellular viability, attachment, and higher proliferation compared to the bare SS substrate. EC6 coatings promote osteogenic differentiation, which is confirmed via the upregulation of the OPN and OCN genes. Moreover, the EC6 sample exhibits improved antibacterial properties against Escherichia coli and Staphylococcus aureus compared to the uncoated ones. The findings of this work emphasize the potential of electrophoretically fabricated BG-EC composite coatings on SS substrates for orthopedic applications.

Biochemical and immunomodulatory insights of extracellular matrix from decellularized human whole cervix: recellularization andin vivoECM remodeling interplay

Extracellular matrix (ECM) rich whole organ bio-scaffolds, preserving structural integrity and essential growth factors, has potential towards regeneration and reconstruction. Women with cervical anomalies or trauma can benefit from clinical cervicovaginal repair using constructs rich in site specific ECM. In this study, complete human cervix decellularization was achieved using a modified perfusion-based stir bench top decellularization method. This was followed by physico-chemical processes including perfusion of ionic agents, enzymatic treatment and washing using detergent solutions for a duration of 10-12 d. Histopathological analysis, as well as DNA quantification confirmed the efficacy of the decellularization process. Tissue ultrastructure integrity was preserved and the same was validated via scanning electron microscopy and transmission electron microscopy studies. Biochemical analysis and structural characterizations like Fourier transform infrared, Raman spectroscopy of decellularized tissues demonstrated preservation of important proteins, crucial growth factors, collagen, and glycosaminoglycans.In vitrostudies, using THP-1 and human umbilical vein endothelial cell (HUVEC) cells, demonstrated macrophage polarization from M1 to M2 and vascular functional genes enhancement, respectively, when treated with decellularized human cervical matrix (DHCp). Crosslinked DHC scaffolds were recellularized with site specific human cervical epithelial cells and HUVEC, showing non-cytotoxic cell viability and enhanced proliferation. Furthermore, DHC scaffolds showed immunomodulatory effectsin vivoon small rodent model via upregulation of M2 macrophage genes as compared to decellularized rat cervix matrix scaffolds (DRC). DHC scaffolds underwent neo-vascularization followed by ECM remodeling with enhanced tissue integration.

A New Approach of Aspheric Intralamellar Keratoprostheses Optic Design made with poly(2-hydroxy ethylmethacrylate) Hydrogel

Keratoprosthesis (KPro) is a surgical procedure largely confined to end-stage corneal blindness correction, where artificial cornea substitutes the native tissue. Though the problem of bio integration was addressed partially by strategic utilization of synthetic polymers and native tissue, major challenges like optical performance and design-associated post-operative complications of KPro were overlooked. Herein, a novel intralamellar KPro design is conceptualized to address these challenges using a light-transparent poly(2-hydroxy ethylmethacrylate) (pHEMA) hydrogel with good shape memory. pHEMA-based optics' theoretically modelled refractive surfaces for both phakic and aphakic conditions were investigated against the standard Navarro model and optimized to new aspheric geometries having high optical functionality utilizing the Zemax OpticStudio software. The optical clear aperture size standardized achieved a 15 % improvement in the illumination field. The introduction of asphericity on the two refractive surfaces of the optic on both models resulted in substantial improvements in the spot spread confinement on the retina, spatial resolution, and Seidel aberration. The design simulation study shows that the developed materials' optical characteristics coupled with newly optimized refractive surface geometries can indeed deliver very high visual performance. Furthermore, the procedure can be adapted to analyze and optimize the optical performance of a KPro, intraocular lens, or contact lens.

Feasibility Insights of the Green-Assisted Calcium-Phosphate Coating on Biodegradable Zinc Alloys for Biomedical Application: In Vitro and In Vivo Studies

In the field of bone tissue engineering, recently developed Zn alloy scaffolds are considered potential candidates for biodegradable implants for bone regeneration and defect reconstruction. However, the clinical success of these alloys is limited due to their insufficient surface bioactivities. Further, the higher concentration of Zn2+ produced during degradation promotes antibacterial activity, but deteriorates osteogenic properties. This study fabricated an Azadirachta indica (neem)-assisted brushite-hydroxyapatite (HAp) coating on the recently developed Zn-2Cu-0.5Mg alloy to tackle the above dilemma. The microstructure, degradation behavior, antibacterial activity, and hemocompatibility, along with in vitro and in vivo cytocompatibility of the coated alloys, are systematically investigated. Microstructural analysis reveals flower-like morphology with uniformly grown flakes for neem-assisted deposition. The neem-assisted deposition significantly improves the adhesion strength from 12.7 to 18.8 MPa, enhancing the mechanical integrity. The potentiodynamic polarization study shows that the neem-assisted deposition decreases the degradation rate, with the lowest degradation rate of 0.027 mm/yr for the ZHN2 sample. In addition, the biomineralization process shows the apatite formation on the deposited coating after 21 days of immersion. In vitro cytotoxicity assay exhibits the maximum cell viability of 117% for neem-assisted coated alloy in 30% extract after 5d and the improved cytocompatibility which is due to the controlled release of Zn2+ ions. Meanwhile, neem-assisted coated alloy increases the ZOI by 32 and 24% for Gram-positive and Gram-negative bacteria, respectively. Acceptable hemolysis (<5%) and anticoagulation parameters demonstrate a promising hemocompatibility of the coated alloy. In vivo implantation illustrates a slight inflammatory response and vascularization after 2 weeks of subcutaneous implantation, and neo-bone formation in the defect areas of the rat femur. Micro-CT and histology studies demonstrate better osseointegration with satisfactory biosafety response for the neem-assisted coated alloy as compared to that without neem-assisted deposition. Hence, this neem-assisted brushite-Hap coating strategy elucidates a new perspective on the surface modification of biodegradable implants for the treatment of bone defects.

Assessment of chitosan-coated zinc cobalt ferrite nanoparticle as a multifunctional theranostic platform facilitating pH-sensitive drug delivery and OCT image contrast enhancement

Colorectal cancer (CC) is one of the most predominant malignancies in the world, with the current treatment regimen consisting of surgery, radiation therapy, and chemotherapy. Chemotherapeutic drugs, such as 5-fluorouracil (5-FU), have gained popularity as first-line antineoplastic agents against CC but have several drawbacks, including variable absorption through the gastrointestinal tract, inconsistent liver metabolism, short half-life, toxicological reactions in several organ systems, and others. Therefore, herein, we develop chitosan-coated zinc-substituted cobalt ferrite nanoparticles (CZCFNPs) for the pH-sensitive (triggered by chitosan degradation within acidic organelles of cells) and sustained delivery of 5-FU in CC cells in vitro. Additionally, the developed nanoplatform served as an excellent exogenous optical coherence tomography (OCT) contrast agent, enabling a significant improvement in the OCT image contrast in a CC tissue phantom model with a biomimetic microvasculature. Further, this study opens up new possibilities for using OCT for the non-invasive monitoring and/or optimization of magnetic targeting capabilities, as well as real-time tracking of magnetic nanoparticle-based therapeutic platforms for biomedical applications. Overall, the current study demonstrates the development of a CZCFNP-based theranostic platform capable of serving as a reliable drug delivery system as well as a superior OCT exogenous contrast agent for tissue imaging.

Thermoresponsive keratin-methylcellulose self-healing injectable hydrogel accelerating full-thickness wound healing by promoting rapid epithelialization

Chronic wounds suffer from impaired healing due to microbial attack and poor vascular growth. Thermoresponsive hydrogels gained attention in wound dressing owing to their gelation at physiological temperature enabling them to take the shape of asymmetric wounds. The present study delineates the development of thermoresponsive hydrogel (MCK), from hair-derived keratin (K) and methylcellulose (MC) in the presence of sodium sulfate. The gelation temperature (Tg) of this hydrogel is in the range of 30 °C to 33 °C. Protein-polymer interaction leading to thermoreversible sol-gel transition involved in MCK blends has been analyzed and confirmed by FTIR, XRD, and thermal studies. Keratin, has introduced antioxidant properties to the hydrogel imparted cytocompatibility towards human dermal fibroblasts (HDFs) as evidenced by both MTT and live dead assays. In vitro wound healing assessment has been shown by enhanced migration of HDFs in the presence of MCK hydrogel compared to the control. Also, CAM assay and CD31 expression by the Wistar rat model has shown increased blood vessel branching after the implantation of MCK hydrogel. Further, in vivo study, demonstrated MCK efficacy of hydrogel in accelerating full-thickness wounds with minimal scarring in Wistar rats, re-epithelialization, and reinstatement of the epidermal-dermal junction thereby exhibiting clinical relevance for chronic wounds.

Enhanced toughness and strength of 3D printed carbide-oxide composite for biomedical applications

Natural materials derived/extracted Ceramics is an excellent material for developing ceramic-based orthopedic implants. Recently, we have demonstrated an easily scalable, energy-efficient green method to extract ceramic particles from bio-waste i.e. chicken bone. Though the chicken bone extract (CBE) has good biocompatibility, it lacks good mechanical properties in the 3D printed condition as that of human bones. Here, we have reinforced CBE with different weight proportions of silicon carbide to improve the mechanical characteristics of the composite. The hybrid of CBE (oxide) and carbide (SiC) is sintered at different temperatures to understand the effect of the interface of the two ceramics. It is observed that temperature has minimal effect and composition has a noticeable effect on mechanical strength as well as bio-toxicity. The toughness (∼3.58 MJ/m3) and compressive strength (∼64.64 MPa) of the 90:10 composition sintered at 1250 °C show the maximum optimum values. A mathematical model has also been developed to predict and correlate the toughness with porosity, volumetric loading, and elastic modulus of the 3D-printed ceramic composite.

Bioactive self-assembling silk fibroin-sericin films for skin tissue engineering

The quest for an ideal wound dressing material has been a strong motivation for researchers to explore novel biomaterials for this purpose. Such explorations have led to the extensive use of silk fibroin (SF) as a suitable polymer for several applications over the years. Unfortunately, another major silk protein-sericin has not received its due attention yet in spite of having favorable biological properties. In this study, we report an approach of blending SF and silk sericin (SS) without the usage of chemical crosslinkers is made possible by the usage of formic acid which evaporates to induceβ-sheets formation to form cytocompatible films. Raman spectroscopy confirms the presence of SF/SS components in blend and formation ofβ-sheet in films.In situ, gelation kinetics studies were conducted to understand the change in gelation properties with addition of sericin into SF. Methyl thiazolyl tetrazolium and live/dead assays were performed to study cellular attachment, viability and proliferation on SF/SS films. The antibacterial properties of SF/SS films were tested using Gram-negative and Gram-positive bacteria. The re-structured SF/SS films were stable, transparent, show good mechanical properties, antibacterial activity and cytocompatibility, therefore can serve as suitable biomaterial candidates for skin regeneration applications.

Iodine functionalized 2,5-dimethoxy-2,5-dihydrofuran (DHFI) crosslinked whey protein-derived carbon nanodots (WCND) for antibacterial application

Whey protein-derived carbon nanodots (WCND) were synthesized using the microwave irradiation method, and its amine-rich surface functionality was crosslinked with covalently bound Iodine functionalized 2,5-dimethoxy-2,5-dihydrofuran (DHFI) to produce WCND-DHFI. The physicochemical characterization of both WCND and WCND-DHFI was performed and compared to comprehend the consequence of iodination on the characteristics of WCND. The suitability of CND in biological environments was evaluated through in vitro cytocompatibility and Chorioallantoic Membrane (CAM) assay, as well as a hemocompatibility study. WCND-DHFI has shown enhanced cell viability against WCND. Further, the antibacterial properties of both CNDs were studied against both gram-positive and gram-negative bacterial strains, representing an enhancement in antibacterial activity after DHFI crosslinking. WCND-DHFI has depicted a stable and prominent bacteriostatic activity for up to 6 h for both strains of bacteria. WCND-DHFI has denoted a 99.996% and 99.999% loss of bacterial viability for gram-positive and negative strains, respectively. Novel surface functionalization portrays an improvement in antibacterial activity. Transmission and scanning electron microscopy represent the cell wall rupturing by the WCND-DHFI, resulting in bacterial death. The ROS-mediated bacteriostatic mechanism of WCND-DHFI has been explored through assessing lipid peroxidation and protein oxidation assay. Moreover, the oxidative damage of DNA also has been explored. WCND-DHFI is performing as a promising cytocompatible and hemocompatible material for antibacterial applications.

Biomechanical analysis of functionally graded porous interbody cage for lumbar spinal fusion

Functionally graded porous (FGP) interbody cage might offer a trade-off between porosity-based reduction of stiffness and mechanical properties. Using finite element models of intact and implanted lumbar functional spinal unit (FSU), the study investigated the quantitative deviations in load transfer and adaptive changes in bone density distributions around FGP interbody cages. The cage had three graded porosities: FGP-A, -B, and -C corresponded to a maximum porosity levels of 48%, 65% and 78%, respectively. Efficacy of the FGP cages were evaluated by comparing the numerically predicted results of solid-Ti and uniformly porous 78% porosity (P78) cage. Variations in stiffness and interface condition affected the strain distribution and bone remodelling around the cages. Peak strains of 0.5-1% were observed in less number of peri-prosthetic bone elements for the FGP cages as compared to the solid-Ti cage. Strains and bone apposition were considerably higher for the bonded implant-bone interface condition than the debonded case. For the FGP-C with bonded interface condition, bone apposition of 11-20% was predicted in the L4 and L5 regions of interest (ROIs); whereas the debonded model exhibited 6-10% increase in bone density. The deviations in bone density change between FGP-C and P78 model were 3-8% for L4 and L5 ROIs. FGP resulted in a reduced average micromotion (∼70-106 μm) as compared to solid-Ti (116 μm), for all physiologic movements. Compared to solid-Ti and uniformly porous cages, the FGP cage seems to be a viable alternative considering the conflicting nature of strength and porosity.

Capra cartilage-derived peptide delivery via carbon nano-dots for cartilage regeneration

Targeted delivery of site-specific therapeutic agents is an effective strategy for osteoarthritis treatment. The lack of blood vessels in cartilage makes it difficult to deliver therapeutic agents like peptides to the defect area. Therefore, nucleus-targeting zwitterionic carbon nano-dots (CDs) have immense potential as a delivery vehicle for effective peptide delivery to the cytoplasm as well as nucleus. In the present study, nucleus-targeting zwitterionic CDs have been synthesized as delivery vehicle for peptides while also working as nano-agents towards optical monitoring of cartilage healing. The functional groups of zwitterion CDs were introduced by a single-step microwave assisted oxidation procedure followed by COL II peptide conjugation derived from Capra auricular cartilage through NHS/EDC coupling. The peptide-conjugated CDs (PCDs) allows cytoplasmic uptake within a short period of time (∼30 m) followed by translocation to nucleus after ∼24 h. Moreover, multicolor fluorescence of PCDs improves (blue, green, and read channel) its sensitivity as an optical code providing a compelling solution towards enhanced non-invasive tracking system with multifunctional properties. The PCDs-based delivery system developed in this study has exhibited superior ability to induce ex-vivo chondrogenic differentiation of ADMSCs as compared to bare CDs. For assessment of cartilage regeneration potential, pluronic F-127 based PCDs hydrogel was injected to rabbit auricular cartilage defects and potential healing was observed after 60 days. Therefore, the results confirm that PCDs could be an ideal alternate for multimodal therapeutic agents.

Biodegradable Multi-layered Silk Fibroin-PCL Stent for the Management of Cervical Atresia: In Vitro Cytocompatibility and Extracellular Matrix Remodeling In Vivo

Cervical atresia is a rare congenital Müllerian duct anomaly that manifests as the absence or deformed nonfunctional presence of the cervix. Herein, a multi-layered biodegradable stent is fabricated using a homogeneous blend of silk fibroin with polycaprolactone using hexafluoroisopropanol as a common solution. Briefly, a concentric cylinder of 3D honeycomb layer is sandwiched within electrospun sheets for fixing at the cervico-uterine junction to pave the way of cervical reconstruction. An average length of 40 mm with 3 mm diameter is fabricated for the hybrid stent design. SEM evidences an evenly distributed pore architecture of the electrospun layer, and mechanical characterization of stent reveals a tensile strength of 1.7 ± 0.2 MPa, with a Young's modulus of 5.9 ± 0.1 MPa. Physico-chemical characterization confirms the presence of silk fibroin and poly caprolactone within the engineered stent. Following 14 days of pepsin enzymatic degradation, 18% degradation and a contact angle measurement of 97° are observed. In vitro cytocompatibility studies are performed using site-specific primary human cervical squamous, columnar epithelial cells, and human endometrial stromal cells. The study demonstrates non-cytotoxic cells' viability (no significant toxicity), improved cell anchoring, adherence among the stent layers, and proliferation in the 3D microenvironment. Furthermore, in vivo subcutaneous studies in the rodent model indicate that the implanted stent undergoes constructive remodeling, neo-tissue creation, neo-vasculature formation, and re-epithelialization while maintaining patency for 2 months.

Design and Additive Manufacturing of Acetabular Implant with Continuously Graded Porosity

Porous structured metallic implants are preferable as bone graft substitutes due to their faster tissue integration mediated by bone in-growth and vascularization. The porous scaffolds/implants should also mimic the graded structure of natural bone to ensure a match of mechanical properties. This article presents a method for designing a graded porous structured acetabular implant and identifies suitable parameters for manufacturing the model through additive manufacturing. The design method is based on slice-wise modification to ensure continuity of gradation. Modification of the slices was achieved through the binary image processing route. A geodesic dome-type design was adopted for developing the acetabular cup model from the graded porous structure. The model had a solid shell with the target porosity and pore size gradually changing from 65% and 950 µm, respectively, in the inner side to 75% and 650 µm, respectively, towards the periphery. The required dimensions of the unit structures and the combinations of pore structure and strut diameter necessary to obtain the target porosity and pore size were determined analytically. Suitable process parameters were identified to manufacture the model by Direct Metal Laser Sintering (DMLS) using Ti6Al4V powder after carrying out a detailed experimental study to minimize the variation of surface roughness and warping over different build angles of the strut structures. Dual-contour scanning was implemented to simplify the scan strategy. The minimum diameter of struts that could be manufactured using the selected scanning strategy and scanning parameters was found to be 375 µm. Finally, the model was built and from the micro-CT data, the porosities and pore sizes were found to be closely conforming to the designed values. The stiffness of the structures, as found from compression testing, was also found to match with that of human trabecular bone well. Further, the structure exhibited compliant bending-dominated behaviour under compressive loading.

Design modification of surgical drill bit for final osteotomy site preparation towards improved bone-implant contact

Implant stability significantly impacts accelerated osseointegration, leading to faster patient recovery. Both primary and secondary stability necessitates superior bone-implant contact influenced by the surgical tool required to prepare the final osteotomy site. Besides, excessive shearing and frictional forces generate heat causing local tissue necrosis. Hence, surgical procedure necessitates proper irrigation with water to minimize heat generation. Notably, the water irrigation system removes bone chips and osseous coagulums, which may help accelerate osseointegration and improve bone-implant contact. The inferior bone-implant contact and thermal necrosis at the osteotomy site are primarily responsible for poor osseointegration and eventual failure. Therefore, optimizing tool geometry is key to minimizing shear force, heat generation, and necrosis during final osteotomy site preparation. The present study explores modified drilling tool geometry, especially cutting edge for osteotomy site preparation. The mathematical modeling is used to find out ideal cutting-edge geometry that facilitates drilling under relatively less operational force (0.55-5.24 N) and torque (98.8-154.5 N-mm) with a significant reduction (28.78%-30.87%) in heat generation. Twenty-three conceivable designs were obtained using the mathematical model; however, only three have shown promising results in static structural FEM platforms. These drill bits are designed for the final drilling operation and need to be carried out during the final osteotomy site preparation.

Human placenta/umbilical cord derivatives in regenerative medicine - Prospects and challenges

The human placenta and umbilical cord, natural birth biowaste, are a housing unit for numerous bioactive macromolecules, growth factors, collagen and GAGs, with an array of high-quality stem cells. MSCs isolated from the human placenta and umbilical cord are utilized in both research and medical applications due to their sustainable sourcing, high viability, multipotent lineage and potency. They present an unprecedented opportunity in the tissue engineering, biomedical and biotechnology fields with minimal ethical constraints and nominal cost. Considering the world population and daily birth rates, with appropriate utilization and management, they could resolve the MSC shortage in the global stem cell therapy market and present biomedical waste disposal. A considerable number of clinical trials are presently underway where placenta-derived stem cells have been administered for different pathologies. Since the umbilical cord and placenta's primary function is to sustain the fetus until delivery, it has an ample supply of nutrients, proteins and essential factors necessary to assist cell viability and proliferation. Present research and medical applications include the fabrication of ECM-based nanofibers, disease models, micro-tissue, hybrid models and artificial implants. Future utilization of birthing biomedical waste in medical engineering and research will provide a rich and sustainable source of stem cells and extracellular matrix for enhanced biocompatibility and regeneration.

Organic-Inorganic Hybrid Nanocomposites for Nanotheranostics: Special Focus on Preventing Emerging Variants of SARS-COV-2

The worldwide emerging cases of various respiratory viral diseases and the current escalation of novel coronavirus disease (COVID-19) make people considerably attentive to controlling these viruses through innovative methods. Most re-emerging respiratory diseases envelop RNA viruses that employ attachment between the virus and host cell to get an entry form using the host cell machinery. Emerging variants of COVD-19 also bring about a constant threat to public health as it has wide infectivity and can quickly spread to infect humans. This review focuses on insights into the current investigations to prevent the progression of incipient variants of Severe Acute Respiratory Syndrome Coronavirus (SARS-COV-2) along with similar enveloped RNA viruses that cause respiratory illness in humans and animals. Nanotheranostics is a trailblazing arena of nanomedicine that simultaneously helps prevent or treat diseases and diagnoses. Nanoparticle coating and nanofibers were extensively explored, preventing viral contaminations. Several studies have proven the virucidal activities of metal nanoparticles like copper, silver, and titanium against respiratory viral pathogens. Worldwide many researchers have shown surfaces coated with ionic nanoparticles like zinc or titanium act as potent antiviral agents against RNA viruses. Carbon nanotubes, quantum dots, silica nanoparticles (NPs), polymeric and metallic nanoparticles have also been explored in the field of nanotheranostics in viral detection. In this review, we have comprehensively discussed different types of metallic, ionic, organic nanoparticles and their hybrids showing substantial antiviral properties to stop the progression of the novel coronavirus disease focused on three key classes: prevention, diagnostics, and treatment.

Biomaterial mediated immunomodulation: An interplay of material environment interaction for ameliorating wound regeneration

Chronic wounds are the outcome of an imbalanced inflammatory response caused by sustenance of immune microenvironment. In this context, tissue engineered graft played great role in healing wounds but faced difficulty in scar remodelling, immune rejection and poor vascularization. All the limitations faced are somewhere linked with the immune cells involved in healing. In this consideration, immunomodulatory biomaterials bridge a large gap with the delivery of modulating factors for triggering key inflammatory cells responsible towards interplay in the wound micro-environment. Inherent physico-chemical properties of biomaterials substantially determine the nature of cell-materials interaction thereby facilitating differential cytokine gradient involved in activation or suppression of inflammatory signalling pathways, and followed by surface marker expression. This review aims to systematically describe the interplay of immune cells involved in different phases in the wound microenvironment and biomaterials. Additionally, it also focuses on modulating innate immune cell responses in the context of triggering the halted phase of the wound healing, i.e., inflammatory phase. The various strategies are highlighted for modulation of wound microenvironment towards wound regeneration including stem cells, cytokines, growth factors, vitamins, and anti-inflammatory agents to induce interactive ability of biomaterials with immune cells. The last section focuses on prospective approaches and current potential strategies for wound regeneration. This includes the development of different models to bridge the gap between mouse models and human patients. Emerging new tools to study inflammatory response owing to biomaterials and novel strategies for modulation of monocyte and macrophage behaviour in the wound environment are also discussed.

Correction: Engineered nanostructures within sol-gel bioactive glass for enhanced bioactivity and modulated drug delivery

Correction for 'Engineered nanostructures within sol-gel bioactive glass for enhanced bioactivity and modulated drug delivery' by Lakshmi M. Mukundan et al., J. Mater. Chem. B, 2022, https://doi.org/10.1039/d2tb01692c.

Comparative evaluation of a patient-specific customised plate designs and screws for partial mandibular reconstruction

Mandibles with odontogenic tumors are often partially reconstructed with a metallic bone graft analogue with dental roots, crowns, along with a customized plate fixed with monocortical or bicortical screws, following resection of the tumor. In this study, two different designs of patient specific customized Ti reconstruction plates, solid and plate with holes, were considered. Fixation through both bicortical and monocortical screw types were investigated. FE models of the reconstructed mandibles were developed to analyse the influence of the plate-screw type combination on the load transfer across the mandibles under a mastication cycle. The effective homogenized orthotropic material properties of the lattice structures with 0.6 mm fibre diameter with 0.5 mm inter-fibre space were assigned to material properties for the bone graft analogue. The study shows that the combination of plate and screw types influences the state of stresses in the reconstructed mandible. Based on the results of this patient specific study, following resection of the tumor, either solid Ti plate with bicortical screws or Ti plate with holes along with monocortical screws may be used for partial mandibulectomy. It should also be noted that stresses in none of the plates or screws exceeded the yield limit for Ti under the mastication cycle indicating that the components are safe for mandibular reconstruction. However, the choice of this combination of reconstruction plates and screws is dependant on the condition and severity of the tumor in the diseased mandible.

Engineered nanostructures within sol-gel bioactive glass for enhanced bioactivity and modulated drug delivery

The engineering of nanocrystalline phase in amorphous oxide materials such as bioactive glass is emerging as a new area of great technological and scientific interest in the field of biomaterials. This study reports for the first time the infusion of apatite nanocrystals in sol-gel-derived bioactive glass using P123 as the structure-directing agent. The synthesis of a multicomponent 80SiO₂-15CaO-5P₂O₅ bioactive glass material having a hierarchically ordered mesoporous structure with uniformly grown nanocrystals of apatite was achieved through a sono-assisted surfactant-templated sol-gel method. The bulk crystallographic analysis together with microstructural characterizations shows that the nanocrystalline apatite domains are uniformly dispersed as well as embedded along the mesopores. These nanocrystalline domains were found to influence the textural properties. In addition, macroscopic evidence for higher signs of bonelike matrix formation was observed by the biomineralization study in simulated body fluids. Osteostimulatory effects of these glass samples were evident by cultures in a osteogenic and non-osteogenic mediums with human osteosarcoma cells and a higher osteopromotive potential was authenticated by the alkaline phosphatase activity and alizarin red staining. Further, this study shows a new strategy to prolong the drug release period on account of the nanocrystalline phase and hierarchically positioned mesopores, thus making it a better drug delivery matrix as well.

High fibroin-loaded silk-PCL electrospun fiber with core-shell morphology promotes epithelialization with accelerated wound healing

Silk fibroin (SF) is a widely explored biopolymer for wound-healing applications due to the presence of amino acids in the biodegradable polymer chain with superior mechanical properties. Herein, a high SF-loaded fibrous matrix along with poly(ε-caprolactone) (PCL) was fabricated using electrospinning of emulsion and blend compositions to modulate nanostructure morphology. A comparative study of the physicomechanical properties of electrospun fibers with emulsion (^eS₇P₃) and homogenous blend (^bS₇P₃) was performed as well. In both compositions, SF loading of up to 70% was successfully achieved in the spun fibers while emulsion yielded core-shell morphology, and the blend resulted in monolith fiber architecture as evidenced by TEM microscopy. Further characterization revealed superior mechanical properties in S₇P₃ fiber with core-shell morphology, as compared to those in the monolith in terms of a higher degree of crystallinity with Young's modulus of 60 MPa under tensile test and nanoindentation modulus of 1.59 ± 0.8 GPa. Further, ^eS₇P₃ nanostructure morphology containing silk in the core with a thin outer layer of PCL facilitated relatively faster biodegradation in the lysozyme medium, as compared to that in the monolith. Owing to the presence of a hydrophobic shell, protein adsorption on the fibrous mat presented slow but steady kinetics up to 24 h. When the scaffold was seeded with human placenta-derived mesenchymal stem cells (hPMSCs), in vitro study confirmed that the ^eS₇P₃ structure had marginally higher cell proliferation with superior cell infiltration than the monolith. Further, in vivo study involving a rodent model showed the potential of the ^eS₇P₃ fiber substrate with a core-shell structure for accelerating full-thickness wound healing by inducing hair follicle and wound closure with less scar formation after 15 days.

Nanoinspired Biocompatible Chemosensors: Progress toward Efficient Prognosis of Arsenic Poisoning

Diagnosing heavy metals poisoning in human beings is of paramount importance. In this work, we present the design of a biocompatible Fe_xNi_(1-x)O hierarchical nanostructure-based sensor for ultraselective detection of arsenate (As(V)) ions in biological environments (e.g., body fluids, blood plasma, etc.). A novel iron doping technique was employed to fabricate the nanostructures rich with Fe cores to induce ultraselectivity toward arsenates. These nanostructures were used as dispersed markers and thin films deposited on Si/SiO₂ substrates to support in vivo and in vitro detection of As(V) ions. The device demonstrated excellent sensitivity with a maximum response of 64.7% (for 1000 ppm As(V) ions) with a limit of detection of 1 ppb in blood plasma. The sensor's response time (τ_r) was 5 s with 95.48% recovery with a maximum error of ±0.549% after three washes. The device showed excellent response stability for 63 days with a maximum error of ±1.27%. The sensor devices were highly reproducible, with a maximum variation of ±0.6% in response for a batch of four devices. Due to Fe doping, the nanostructures in suspension demonstrated as arsenate markers with excellent cytocompatibility (with dosage up to 1 mg/mL) for human umbilical vein endothelial cells and 3T3 fibroblasts (LDH < 120 and cell viability ∼80%) till 48 h of incubation. The sensing mechanism suggested that the nanostructures not only detect arsenates but also prevent their substantial reduction to arsenites under anoxic environments. Thus, the sensors may show considerable progress toward early arsenate detection in living systems.

P-466 Decellularization of whole organ human cervix: Physio and biochemical aspects of decellularized extracellular matrix

Study question

Can the whole organ-cervix be decellularized while maintaining its fiber ultrastructure and extracellular matrix (ECM) functionality?

Summary answer

Cervix after decellularization could maintain the physical properties, ECM was found to be intact and functional.

What is known already

ECM-rich bioscaffolds are obtained from the process that utilizes the decellularization of tissues and organs. Cervical bioengineering is needed for clinical cervicovaginal reconstruction and tissue constructs can help women with cervical abnormalities.

Study design, size, duration

Human cervices were obtained from hysterectomized samples from 3 women undergoing surgery for complete hysterectomy during January 2021 to December 2021

Participants/materials, setting, methods

Human cervices were obtained from hysterectomized samples from 3 women undergoing surgery and were subjected to whole organ decellularization. Various physical, chemical methods were employed to remove cellular remnants for a period of 10 days via perfusion of ionic and detergent solutions. Validation of complete decellularization was done via hematoxylin and eosin (H&E) staining, DNA quantification. ECM functionality was observed.

Main results and the role of chance

Well-organized ECM was obtained. Effective complete decellularization was dictated and verified by cervical tissue density, histopathological studies, DNA quantification and biochemical tests. H&E staining reflected the absence of any nuclear material in the endocervical and ectocervical tissues. Tissue microarchitecture and descending uterine artery were intact and could be helpful in the nutrient and gas exchange. DNA was found to be around 70 ng/mg tissue weight. Cell-free tissue-derived scaffolds were obtained along with a combination of growth factors and proteins.

Limitations, reasons for caution

Acellular cervical scaffold as a whole organ with vasculature intact for site-specific transplantation is a bigger question and still unaddressed.

Wider implications of the findings

Our study creates numerous prospects for in-vitro and in-vivo whole cervix tissue engineering. Site-specific tissue holds a promising avenue for the reconstruction of cervical abnormalities.

Trial registration number

Not applicable

Metal Ion Augmented Mussel Inspired Polydopamine Immobilized 3D Printed Osteoconductive Scaffolds for Accelerated Bone Tissue Regeneration

Critical bone defects with a sluggish rate of auto-osteoconduction and imperfect reconstruction are motivators for the development of an alternate innovative approach for the regeneration of bone. Tissue engineering for bone regeneration signifies an advanced way to overcome this problem by creating an additional bone tissue substitute. Among different fabrication techniques, the 3D printing technique is obviously the most efficient and advanced way to fabricate an osteoconductive scaffold with a controlled porous structure. In the current article, the polycarbonate and polyester diol based polyurethane-urea (P12) was synthesized and 3D porous nanohybrid scaffolds (P12/TP-nHA) were fabricated using the 3D printing technique by incorporating the osteoconductive nanomaterial titanium phosphate adorned nanohydroxyapatite (TP-nHA). To improve the bioactivity, the surface of the fabricated scaffolds was modified with the immobilized biomolecule polydopamine (PDA) at room temperature. XPS study as well as the measurement of surface wettability confirmed the higher amount of PDA immobilization on TP-nHA incorporated nanohybrid scaffolds through the dative bone formation between the vacant d orbital of the incorporated titanium ion and the lone pair electron of the catechol group of dopamine. The incorporated titanium phosphate (TP) increased the tensile strength (53.1%) and elongation at break (96.8%) of the nanohybrid composite as compared to pristine P12. Moreover, the TP incorporated nanohybrid scaffold with calcium and phosphate moieties and a higher amount of immobilized active biomolecule improved the in vitro bioactivity, including the cell viability, cell proliferation, and osteogenic gene expression using hMSCs, of the fabricated nanohybrid scaffolds. A rat tibia defect model depicted that the TP incorporated nanohybrid scaffold with immobilized PDA enhanced the in vivo bone regeneration ability compared to the control sample without revealing any organ toxicity signifying the superior osteogenic bioactivity. Thus, a TP augmented polydopamine immobilized polyurethane-urea based nanohybrid 3D printed scaffold with improved physicochemical properties and osteogenic bioactivity could be utilized as an excellent advanced material for bone regeneration substitute.

pH-Responsive Copolymeric Network Gel Using Methacrylated β-Cyclodextrin for Controlled Codelivery of Hydrophilic and Hydrophobic Drugs

In medical science, sometimes two drugs with different solubilities are simultaneously required in combination to treat various diseases. Herein, a pH-responsive, copolymeric, antioxidant, biocompatible, and chemically crosslinked network gel is prepared to explore its capability as a matrix for controlled release of both hydrophobic [ibuprofen (IB)] and hydrophilic [tetracycline hydrochloride (TCH)] drugs, simultaneously. This three-dimensional β-CD-Meth-cl-(PHPMA-co-PAAc) network hydrogel is synthesized via two steps: (I) methacrylation of β-cyclodextrin and (II) grafting of poly(hydroxypropyl methacrylate) and poly(acrylic acid), followed by crosslinking of poly(ethylene glycol) diacrylate onto the backbone of methacrylated β-cyclodextrin (β-CD-Meth). The successful synthesis of the hydrogel is confirmed using several physiochemical characterizations. The β-CD-Meth-cl-(PHPMA-co-PAAc) hydrogel has an excellent network-like surface morphology. The potential pH-responsive high swelling behavior and excellent shrinking features suggest the reversible nature of the synthesized gel. Besides, rheological analyses affirm its excellent viscoelastic nature. This network gel is biodegradable and its non-cytotoxic nature toward human dermal fibroblast cells is demonstrated. Moreover, the dual drug release pattern from the copolymer under both in vitro and in vivo conditions portrays that this hydrogel has superior ability to be used as a controlled release matrix for both hydrophobic and hydrophilic drugs (TCH and IB) with varying solubilities concurrently.

Bone Remodelling Around Solid and Porous Interbody Cages in the Lumbar Spine

Spinal fusion is an effective surgical treatment for intervertebral disc degeneration. However, the consequences of implantation with interbody cages on load transfer and bone remodelling in the vertebral bodies has scarcely been investigated. Using detailed 3D models of an intact and implanted lumbar spine and the strain energy density based bone remodelling algorithm, this study investigated the evolutionary changes in bone density distributions around porous and solid interbody cages. Follower load technique and submodelling approach were employed to simulate applied loading conditions on the lumbar spine models. The study determined the relationship between mechanical properties and parametrical characteristics of porous Body-centered-cubic (BCC) models, which corroborated well with Gibson-Ashby and exponential regression models. Variations in porosity affected the peri-prosthetic stress distributions and bone remodelling around the cages. In comparison to the solid cage, stresses and strains in the cancellous bone decreased with an increase in cage porosity; whereas the range of motion increased. For the solid cage, increase in bone density of 20-28% was predicted in the L4 inferior and L5 superior regions; whereas the model with 78% porosity exhibited a small 3-5% change in bone density. An overall increase of 9-14% bone density was predicted in the L4 and L5 vertebrae after remodelling for solid interbody cages, which may influence disc degeneration in the adjacent segment. In comparison to the solid cage, an interbody cage with 65-78% porosity could be a viable and promising alternative, provided sufficient mechanical strength is offered.

β-Cyclodextrin-Based Ultrahigh Stretchable, Flexible, Electro- and Pressure-Responsive, Adhesive, Transparent Hydrogel as Motion Sensor

In the present work, a multiple-stimuli-responsive hydrogel has been synthesized via polymerization of acrylamide (AAm) and N-hydroxy methyl acrylamide (HMAm) on β-cyclodextrin (β-CD). The synthesized hydrogel β-CD-g-(pAAm/pHMAm) exhibited various striking features like ultrahigh stretchability (>6000%), flexibility, stab resistivity, self-recoverability, electroresponsiveness, pressure-responsiveness, adhesiveness, and high transparency (>90%). Besides, the hydrogel has demonstrated enhanced biocompatibility, UV resistance, and thermoresponsive shape memory behaviors. On the basis of these attractive characteristics of the hydrogel, a flexible pressure sensor for the real-time monitoring of human motion with superior biocompatibility and transparency was fabricated. Moreover, due to the nanofibrillar surface morphology of the β-CD-g-(pAAm/pHMAm) hydrogel, the sensor based on the gel exhibited high sensitivity (0.053 kPa^-1 for 0-3.3 kPa). The flexible sensor demonstrates very fast response time (130 ms-210 ms) with adequate stability (5000 cycles). Interestingly, the sensor can rapidly sense both robust (index finger and wrist) motions as well as tiny (swallowing and phonation) physiological actions. In addition, this adhesive hydrogel patch also acts as a potential carrier for the sustained topical release of (∼80.8% in 48 h) the antibiotic drug gentamicin sulfate.

Influence of Copper on the Microstructural, Mechanical, and Biological Properties of Commercially Pure Zn-Based Alloys for a Potential Biodegradable Implant

Three Zn-based alloys (Zn1Cu, Zn2Cu, and Zn3Cu) were developed by the addition of Cu (1, 2, and 3 wt %) into commercially pure Zn. This report systematically investigates the potential for these newly developed Zn-based alloys as biodegradable materials. Microstructural studies reveal the presence of spherical-shaped nanosized precipitates of ε-CuZn₄ in the Zn1Cu alloy, whereas Zn2Cu and Zn3Cu alloys exhibit the presence of both micron- and nanosized precipitates of ε-CuZn₄. The mechanical properties such as hardness, tensile and compressive strengths improve significantly with an increase in the amount of Cu in the alloy. The Zn3Cu alloy exhibits the highest yield strength (225 ± 9 MPa) and ultimate tensile strength (330 ± 12 MPa) among all of the alloys, which are ∼2.7 and 2 times higher than those of pure Zn. In vitro degradation behavior is evaluated by the potentiodynamic polarization study and immersion testing in Hank's solution for 20 and 75 days. The corrosion rate after both polarization and immersion testing follows the order of pure Zn < Zn1Cu < Zn3Cu < Zn2Cu. An electrochemical impedance spectroscopy (EIS) study also concludes that Zn2Cu shows the lowest corrosion resistance. The % cell viability values of 3T3 fibroblasts cells after 5 days of culture in a 50% diluted extract of pure Zn, Zn2Cu, and Zn3Cu alloys are 76 ± 0.024, 86.18 ± 0.033, and 92.9 ± 0.026%, respectively, establishing the improved cytocompatibility of the alloys as compared to pure Zn. Furthermore, an antibacterial study also reveals that the Zn3Cu alloy exhibits 80, 67, and 100% increases in the zone of inhibition (ZOI) for Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa bacteria, respectively, as compared to that of pure Zn.

Poly(N-vinyl imidazole) Cross-Linked β-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked β-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 μL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

Bone remodelling in implanted proximal femur using topology optimization and parameterized cellular model

The clinical relevance of bone remodelling predictions calls for accurate finite element (FE) modelling of implant-bone structure and musculoskeletal loading conditions. However, simplifications in muscle loading, material properties, has often been used in FE simulations. Bone adaptation induces changes in bone apparent density and its microstructure. Multiscale simulations, involving optimization methods and biomimetic microstructural models, have proven to be promising for predicting changes in bone morphology. The objective of the study is to develop a novel computational framework to predict bone remodelling around an uncemented femoral implant, using multiscale topology optimization and a parameterized cellular model. The efficacy of the scheme was evaluated by comparing the remodelling predictions with those of isotropic strain energy density (SED) and orthotropy based formulations. The characteristic functional groups and low-density regions of Ward's triangle, predicted by the optimization scheme, were comparable to micro-CT images of the proximal femur. Although the optimization scheme predicted well comparable material distribution in the 2D femur models, the obscured material orientations in some planes of the 3D model indicate the need for a more robust modelling of the boundary conditions. Regression analysis revealed a higher correlation (0.6472) between the topology optimization and SED models than the orthotropic predictions (0.4219). Despite higher bone apposition of 10-20% around the distal tip of the implant, the bone density distributions were well comparable to clinical observations towards the proximal femur. The proposed computational scheme appears to be a viable method for including bone anisotropy in the remodelling formulation.

Microsphere embedded hydrogel construct - binary delivery of alendronate and BMP-2 for superior bone regeneration

Biomimetic delivery of osteoinductive growth factors via an osteoconductive matrix is an interesting approach for stimulating bone regeneration. In this context, the bone extracellular matrix (ECM) has been explored as an optimal delivery system, since it releases growth factors in a spatiotemporal manner from the matrix. However, a bone ECM hydrogel alone is weak, unstable, and prone to microbial contamination and also has been reported to have significantly reduced bone morphogenic protein-2 (BMP-2) post decellularization. In the present work, a microsphere embedded osteoinductive decellularized bone ECM/oleoyl chitosan based hydrogel construct (BOC) was developed as a matrix allowing dual delivery of an anti-resorptive drug (alendronate, ALN, via the microspheres) and BMP-2 (via the hydrogel) for a focal tibial defect in a rabbit model. The synthesized gelatin microspheres (GMs) were spherical in shape with diameter ∼32 μm as assessed by SEM analysis. The BOC construct showed sustained release of ALN and BMP-2 under the studied conditions. Interestingly, amniotic membrane-derived stem cells (HAMSCs) cultivated on the hydrogel construct demonstrated excellent biocompatibility, cell viability, and active proliferation potential. Additionally, cell differentiation on the constructs showed an elevated expression of osteogenic genes in an RT-PCR study along with enhanced mineralized matrix deposition as demonstrated by alkaline phosphatase (ALP) assay and alizarin red assay. The hydrogel construct was witnessed to have improved neo-vascularization potential in a chick chorioalantoic membrane (CAM) assay. Also, histological and computed tomographic findings evidenced enhanced bone regeneration in the group treated with the BOC/ALN/BMP hydrogel construct in a rabbit tibial defect model. To conclude, the developed multifunctional hydrogel construct acts as an osteoinductive and osteoconductive platform facilitating controlled delivery of ALN and BMP-2, essential for stimulating bone tissue regeneration.

Monolith Dental Bridge by Soft Machining of Dried Ceramic Dough

All-ceramic fixed restorations are gaining popularity because of increased esthetic consciousness in the younger population. Monolith ceramic crowns and bridges are preferred to withstand masticatory loads where the availability of occlusal height is limited. Machining green blanks of ceramic with organic binders have been studied to reduce loss of final strength, cost, and wastage associated with milling partial sintered and sintered blanks. Notches on the surface/edge associated with green milling will disappear after sintering in contrast to sintered state machining where diamond polishing is essential. In this study, we explored a novel ceramic dough process to form a green body of alumina or 3 Mol% yttria-stabilized zirconium oxide (YSZ), and computer numerical control (CNC) machining was performed on the dried dough. Micro Computer Tomography analysis of the bridges after sintering revealed a negligible void volume, 0.06–0.08% of the total volume, with randomly dispersed voids. Precision analysis of the sintered bridges with respect to the reference file resulted in a deviation range of +0.56 to −0.79 mm, with negligible deviation on the cementation surface. The green machined surface had a roughness profile of 1.2–1.7 μm after machining and 2.2–2.4 μm after sintering, as revealed by 3D profilometry.

Raman spectroscopy assisted biochemical evaluation of L929 fibroblast cells on differentially crosslinked gelatin hydrogels

Biochemical evaluation of cell-matrix interaction using conventional labelling techniques often possesses limitations due to dye entrapment. In contrast, Raman spectroscopy guided approach offers label-free determination of cell-matrix biochemistry. Herein, gelatin (Gel) matrices modified with 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/ N-Hydroxysuccinimide (EDC/NHS) and glutaraldehyde (GTA) was used as standards for comparative evaluation. Raman spectroscopy was deployed as a label-free approach to investigate interaction of cells with Gel hydrogels. Raman-based approach assisted in evaluation of cell-matrix interactions by identifying key biomolecular signatures retrospecting the fact that L929 fibroblast cells portrayed excellent growth and proliferation kinetics in crosslinked Gel as compared to its bare counterpart. EDC crosslinked hydrogels exhibited superior cell proliferation than its GTA counterparts. Cell proliferation on differentially crosslinked gel was also confirmed using standard MTT Assay and Rhodamine-DAPI staining thus corroborating the fact that Raman spectroscopy can be deployed as a superior label-free alternative towards real-time determination of cell proliferation and growth.

Direct 3D Printing of Seashell Precursor toward Engineering a Multiphasic Calcium Phosphate Bone Graft

Multiphasic calcium phosphate (Ca-P) has widely been explored for bone graft replacement. This study represents a simple method of developing osteoinductive scaffolds by direct printing of seashell resources. The process demonstrates a coagulation-assisted extrusion-based three-dimensional (3D) printing process for rapid fabrication of multiphasic calcium phosphate-incorporated 3D scaffolds. These scaffolds demonstrated an interconnected open porous architecture with improved compressive strength and higher surface area. Multiphasic calcium phosphate (Ca-P) and hydroxyapatite present in the multi-scalar naturally resourced scaffold displayed differential protein adsorption, thus facilitating cell adhesion, migration, and differentiation, resulting in enhanced deposition of the extracellular matrix. The microstructural and physicochemical attributes of the scaffolds also lead to enhanced stem cell differentiation as witnessed from gene and protein expression analysis. Furthermore, the histological study of subcutaneous implantation evidently portrays promising biocompatibility without foreign body reaction. Neo-tissue in-growth was manifested with abundant blood vessels, thus indicative of excellent vascularization. Notably, cartilaginous and proteoglycan-rich tissue deposition indicated ectopic bone formation via an endochondral ossification pathway. The hierarchical interconnected porous architectural tribology accompanied with multiphasic calcium phosphate composition manifests its successful implication in enhancing stem cell differentiation and promoting excellent tissue in-growth, thus making it a plausible alternative in bone tissue engineering applications.

Pancreatic cancer prognosis is predicted by an ATAC-array technology for assessing chromatin accessibility

Unlike other malignancies, therapeutic options in pancreatic ductal adenocarcinoma (PDAC) are largely limited to cytotoxic chemotherapy without the benefit of molecular markers predicting response. Here we report tumor-cell-intrinsic chromatin accessibility patterns of treatment-naïve surgically resected PDAC tumors that were subsequently treated with (Gem)/Abraxane adjuvant chemotherapy. By ATAC-seq analyses of EpCAM+ PDAC malignant epithelial cells sorted from 54 freshly resected human tumors, we show here the discovery of a signature of 1092 chromatin loci displaying differential accessibility between patients with disease free survival (DFS) < 1 year and patients with DFS > 1 year. Analyzing transcription factor (TF) binding motifs within these loci, we identify two TFs (ZKSCAN1 and HNF1b) displaying differential nuclear localization between patients with short vs. long DFS. We further develop a chromatin accessibility microarray methodology termed "ATAC-array", an easy-to-use platform obviating the time and cost of next generation sequencing. Applying this methodology to the original ATAC-seq libraries as well as independent libraries generated from patient-derived organoids, we validate ATAC-array technology in both the original ATAC-seq cohort as well as in an independent validation cohort. We conclude that PDAC prognosis can be predicted by ATAC-array, which represents a low-cost, clinically feasible technology for assessing chromatin accessibility profiles.

Numerical analysis of the mechanical behaviour of intact and implanted lumbar functional spinal units: Effects of loading and boundary conditions

The objective of this study was to develop an improved finite element (FE) model of a lumbar functional spinal unit (FSU) and to subsequently analyse the deviations in load transfer owing to implantation. The effects of loading and boundary conditions on load transfer in intact and implanted FSUs and its relationship with the potential risk of vertebral fracture were investigated. The FE models of L1-L5 and L3-L4 FSUs, intact and implanted, were developed using patient-specific CT-scan dataset and segmentation of cortical and cancellous bone regions. The effect of submodelling technique, as compared to artificial boundary conditions, on the elastic behaviour of lumbar spine was examined. Applied forces and moments, corresponding to physiologic movements, were used as loading conditions. Results indicated that the loading and boundary conditions considerably affect stress-strain distributions within a FSU. This study, based on an improved FE model of a vertebra, highlights the importance of using the submodelling technique to adequately evaluate the mechanical behaviour of a FSU. In the intact FSU, strains of 200-400 µε were observed in the cancellous bone of vertebral body and pedicles. High equivalent stresses of 10-25 MPa and 1-5 MPa were generated around the pars interarticularis for cortical and cancellous regions, respectively. Implantation caused reductions of 85%-92% in the range of motion for all movements. Insertion of the intervertebral cage resulted in major deviations in load transfer across a FSU for all movements. The cancellous bone around cage experienced pronounced increase in stresses of 10-15 MPa, which indicated potential risk of failure initiation in the vertebra.

Orthotropic bone remodelling around uncemented femoral implant: a comparison with isotropic formulation

Peri-prosthetic bone adaptation has usually been predicted using subject-specific finite element analysis in combination with remodelling algorithms and assuming isotropic bone material property. The objective of the study is to develop an orthotropic bone remodelling algorithm for evaluation of peri-prosthetic bone adaptation in the uncemented implanted femur. The simulations considered loading conditions from a variety of daily activities. The orthotropic algorithm was tested on 2D and 3D models of the intact femur for verification of predicted results. The predicted orthotropic directionality, based on principal stress directions, was in agreement with the trabecular orientation in a micro-CT data of proximal femur. The validity of the proposed strain-based algorithm was assessed by comparing the predicted results of the orthotropic model with those of the strain-energy-density-based isotropic formulation. Despite agreement in cortical densities [Formula: see text], the isotropic remodelling algorithm tends to predict relatively higher values around the distal tip of the implant as compared to the orthotropic model. Both formulations predicted 4-8% bone resorption in the proximal femur. A linear regression analysis revealed a significant correlation [Formula: see text] between the stresses and strains on the cortex of the proximal femur, predicted by the isotropic and orthotropic formulations. Despite reasonable agreement in peri-prosthetic bone density distributions, the quantitative differences with isotropic model predictions highlight the combined influences of bone orthotropy and mechanical stimulus in the adaptation process.

Dual Functionalized Injectable Hybrid Extracellular Matrix Hydrogel for Burn Wounds

Low strength and rapid biodegradability of acellular dermal matrix (ADM) restrict its wider clinical application as a rapid cell delivery platform in situ for management of burn wounds. Herein, the extracted ADM was modified by a dual cross-linking approach with ionic crosslinking using chitosan and covalent cross-linking using an iodine-modified 2,5-dihydro-2,5-dimethoxy-furan cross-linker, termed as CsADM-Cl. In addition, inherent growth factors and cytokines were found to be preserved in CsADM-Cl, irrespective of ionic/covalent crosslinking. CsADM-Cl demonstrated improvement in post crosslinking stiffness with a decreased biodegradation rate. This hybrid crosslinked hydrogel supported adhesion, proliferation, and migration of human foreskin-derived fibroblasts and keratinocytes. Also, the angiogenic potential of CsADM-Cl was manifested by chick chorioallantoic membrane assay. CsADM-Cl showed excellent antibacterial activity against Escherichia coli and Staphylococcus aureus. Moreover, CsADM-Cl treated full thickness burn wounds and demonstrated rapid healing marked with superior angiogenesis, well-defined dermal-epidermal junctions, mature basket weave collagen deposition, and development of more pronounced secondary appendages. Altogether, the bioactive CsADM-Cl hydrogel established significant clinical potential to support wound healing as an apt injectable antibacterial matrix to encounter unmet challenges concerning critical burn wounds.

Carbon nanodot decorated acellular dermal matrix hydrogel augments chronic wound closure

Impaired skin regeneration in chronic wounds like in diabetes corresponds to high oxidative stress, poor angiogenesis and insufficient collagen hyperplasia. Therefore, a multifaceted strategy for treatment is required to address critical issues associated with chronic wound healing. Fascinating application of nanomaterials in chronic wounds is still limited; hence, in the present work bioactive solubilized decellularized dermal matrix (sADM) was employed to form a hydrogel with chitosan (CTS) at physiological pH/temperature and modified with reactive oxygen species (ROS) scavenging carbon nanodots (ND). A detailed in vitro investigation found that the ND modified bioactive hydrogel (CsADMND) is suitable for human amniotic membrane derived stem cell (hAMSC) delivery. Also, CsADMND was observed to possess a good ROS scavenging property, hemocompatibility and pro-angiogenic potential as demonstrated by 2,2-diphenyl-1-picrylhydrazyl (DPPH), haemolysis and chick chorioallantoic membrane (CAM) assay, respectively. The hybrid hydrogel promoted migration of cells in vitro in scratch assay owing to its antioxidant potential and the presence of bioactive moieties. Further, its efficacy in healing full thickness (FT) chronic wounds was evaluated in a streptozotocin (STZ) induced diabetic model. The CsADMND hydrogel after association with hAMSCs led to stimulation of early angiogenesis, superior collagen deposition, rapid wound closure, complete reepithelialisation, and formation of distinct organized dermal epidermal junctions (DEJ) post 21 days of healing. These results suggest that the hAMSC laden CsADMND hydrogel may serve as a promising therapeutic strategy for the management of chronic wounds.

Decellularized bone matrix/oleoyl chitosan derived supramolecular injectable hydrogel promotes efficient bone integration

Hydrogels derived from decellularized extracellular matrix (ECM) have been widely used as a bioactive matrix for facilitating functional bone tissue regeneration. However, its poor mechanical strength and fast degradation restricts the extensive use for clinical application. Herein, we present a crosslinked decellularized bone ECM (DBM) and fatty acid modified chitosan (oleoyl chitosan, OC) based biohybrid hydrogel (DBM/OC) for delivering human amnion-derived stem cells (HAMSCs) for bone regeneration. DBM/OC hydrogel were benchmarked against collagen-I/OC (Col-I/OC) based hydrogel in terms of their morphological characteristics, rheological analysis, and biological performances. DBM/OC hydrogel with its endogenous growth factors recapitulates the nanofibrillar 3D tissue microenvironment with improved mechanical strength and also exhibited antimicrobial potential along with superior proliferation/differentiation ability. HAMSCs encapsulation potential of DBM/OC hydrogel was established by well spread cytoskeleton morphology post 14 days of cultivation. Further, ex-vivo chick chorioallantoic membrane (CAM) assay revealed excellent neovascularization potential of DBM/OC hydrogel. Subcutaneously implanted DBM/OC hydrogel did not trigger any severe immune response or infection in the host after 21 days. Also, DBM/OC hydrogels and HAMSCs encapsulated DBM/OC hydrogels were implanted at the tibial defect in a rabbit model to assess the bone regeneration ability. Quantitative micro-CT and histomorphological analysis demonstrated that HAMSCs encapsulated DBM/OC hydrogel can support more mature mineralized bone formation at the defect area compared to DBM/OC hydrogel or SHAM. These findings manifested the efficacy of DBM/OC hydrogel as a functional cell-delivery vehicle and osteoinductive template to accelerate bone regeneration.

Denaturant-Mediated Modulation of the Formation and Drug Encapsulation Responses of Gold Nanoparticles

The extensive and diversified applications of the well-known plasmonic nanoparticle systems along with their easy and environment-friendly synthesis strategies drive us to investigate in-depth this important research field. In the current scenario, our present study deals with an important plasmonic nanomaterial, i.e., globular protein, and human serum albumin (HSA)-conjugated gold nanoparticle (HSA-Au NP) system. The well-known chemical denaturants, urea and guanidine hydrochloride (GdnHCl or GnHCl), are investigated to show detrimental effects toward the formation of gold nanoparticles; however, the effect of GdnHCl is observed to be much prominent compared to that of urea. The synthesized nanoparticle system is found to be highly biocompatible from the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)-based cytotoxicity assay, and therefore, the applications of encapsulation of the well-known anticancer drug molecule, doxorubicin hydrochloride (Dox), in the nanoparticle system are further studied. In this drug encapsulation study, drug-metal complexation between Dox and HAuCl₄·3H₂O has been discussed elaborately. Similar to the nanoparticle formation, the effects of denaturants on drug encapsulation have also been discovered, and interestingly, it has been observed that urea plays a positive role, whereas GdnHCl plays a negative or detrimental role toward drug encapsulation in the synthesized gold nanoparticle system. The detailed photophysical mechanisms behind the drug encapsulation in the synthesized plasmonic nanosystem at every stage have also been explored. Overall, this study will conclusively explain the influences of the extensively used chemical denaturants on the synthesis and drug encapsulation behaviors of a well-known protein-conjugated gold nanoparticle, and as a consequence, it can be highly useful and acceptable to the biomedical and pharmaceutical research communities.

Bioinspired 3D porous human placental derived extracellular matrix/silk fibroin sponges for accelerated bone regeneration

Critical bone defects arising from traumatic injury and diseases are of major health concern since they are unable to heal spontaneously without clinical intervention. In this context, bone tissue engineering provides an attractive approach to treat bone defects by providing a bioactive template which has the potential to guide osseous tissue regeneration. In this study, porous hybrid placental extracellular matrix sponge (PIMS) was fabricated by a combinatorial method using silk fibroin (SF)/placental derived extracellular matrix and subsequently evaluated its efficacy towards bone tissue regeneration. The presence of intrinsic growth factors was evidenced by immunoblotting of the extracted proteins derived from the placental derived extracellular matrix. This growth factor rich PIMS lends a unique bioactive scaffolding to human amniotic mesenchymal stem cells (HAMSCs) which supported enhanced proliferation as well as superior osteogenic differentiation. Gene expression studies demonstrated significant up-regulation of osteogenic related genes in the PIMS group. PIMS when implanted in the chick chorioallantoic membrane, significantly attracted allantoic vessels revealing its potential to stimulate angiogenesis ex vivo. Furthermore, no severe immune response to the host was observed on subcutaneous implantation of PIMS in vivo. Instead, it supported the formation of blood vessels, revealing its outstanding biocompatibility. Additionally, critical tibial defects treated with PIMS demonstrated higher bone volume after six weeks when analyzed by micro-CT, which was accompanied by high mineral density. Histological and immunofluorescence studies validated the results and revealed enhanced osseous tissue regeneration after six weeks of surgery. All these findings recapitulated that the growth factors incorporated bioactive PIMS could perform as an appropriate matrix for osteogenic differentiation and efficient bone regeneration.