Sustainable appraisal of lipstick tree seeds (Bixa orellana)-based bixin natural orange colorant for green mordanted silk fabrics and wool yarns

This research aims to optimize the silk and wool dyeing process using natural dyes from Bixa orellana (annatto) through response surface methodology. Central composite design experiments highlight the significant enhancement of color outcomes achieved through microwave treatment. For silk, the optimal conditions (80 °C for 40 min) with annatto extract yield a color strength (K/S) of 17.8588, while wool achieves a K/S of 7.5329. Introducing eco-friendly bio-mordants, such as pomegranate peel and red sumac tannins, enhances color strength. Pre-dyeing treatments with 2% red sumac, 1.5% pomegranate peel, and weld flower extracts for silk produce high color strength, with K/S values of 16.4063, 16.3784, and 12.1658, respectively. Post-dyeing, the K/S values increase to 40.1178, 17.4779, and 21.6494. Wool yarn exhibits similar improvements, with pre-dyeing K/S values of 13.1353, 13.5060, and 16.3232, escalating to 10.5892, 15.3141, and 23.4850 post-dyeing. Furthermore, this research underscores improved colorfastness properties, including notable enhancements in light, wash, and rubbing fastness for both silk fabric and wool yarn. These findings underscore the efficacy of the proposed sustainable dyeing methods, offering valuable insights for eco-friendly textile production.

In quest for improvement of dyeing properties using agriculture waste: utilization of Oleaster as new bio-mordant for wool yarns

Agricultural waste is an unwanted material that is not only unmarketable, but also has secondary costs such as environmental pollution. Oleaster, also known as olive Russian fruit, has various uses, but it also produces waste such as seeds and peels. Oleaster fruit and all its parts are tannin rich, which can be utilized as natural mordant. Improvement of fastness and color properties of natural dyed fibers is obtained by using mordant. The employing of this mordant is effective in reducing agricultural waste and the production of dyeing chemical waste. Reseda extract was utilized as natural dye to investigate the color characteristics. The study of the phenolic percentage of different components of the Oleaster fruit, including peel, seed, and flesh, showed that each of these materials can be used as natural mordant. The formation of physical bonds in the presence of all kinds of mordant was investigated using the FTIR method, and the results showed that their performance is similar and they are effective in surface treatment of wool. Investigation of color characteristics of the yarns showed that the color strength increases in the presence of mordant. Studying the fastness of yarns dyed with ISO methods showed that the samples have high washing fastness.

Exploration of natural colourant of (Solanum melongena L.) brinjal plant residues for fabric dyeing: a novel approach towards textile processing

Natural products have become the main focus of mankind due to increasing environmental pollution. The current study was concerned with brinjal plant residues as a source of bio colourant for cotton dyeing. Various media have been employed for the extraction of colourant. Present studies illustrated that excellent colourant yield was obtained in 4% acidified methanol. Cotton fabric was dyed at 50 °C, for 55 min and showed optimised dyeing conditions. Varying chemicals and bio-mordants have been used to achieve elegant shade. Chemical mordanting results revealed that 2% FeSO4as pre-mordant, and 6% TA as post-mordant while in bio- mordanting, 8% of pomegranate peel extract as pre-mordant and 2% pomegranate peel extract as post-mordant indicated a darker shade to mordanted fabrics. Bio-mordanting gave darker shade, and fastness which revealed that bio-mordants have improved the fastness characteristics. FTIR results revealed the confirmation of flavonoids as a colourant for cotton dyeing.

Patient Outcomes and Rate of Intensive Care Unit Admissions Following Bariatric Surgery: A Retrospective Cohort Study of 775 Patients

Background The last two decades have seen a significant rise in obesity and its adverse consequences across the globe. Bariatric surgery has emerged as a widely employed therapeutic approach for weight reduction and alleviating the risk of obesity-related chronic diseases such as diabetes, cardiovascular diseases, and cancer. As bariatric procedures are gaining popularity, the complications associated with these procedures can not be ignored. This retrospective study aimed to investigate the incidence of intensive care unit (ICU) admissions following bariatric surgery and ICU-related mortality. Methodology This retrospective study conducted at King Hamad University Hospital, Bahrain evaluated the patient outcomes and the rate of ICU admissions following bariatric surgery between 2018 and 2022. Demographic data of the patients were extracted from electronic health records. The primary endpoint was ICU admission incidence and mortality, while secondary outcomes included risk factors, duration of ICU stay, and complications leading to ICU admission. Results Of the 775 patients included, 66.3% were female. The mean age of the patients was 35.92 ± 21.12 years. Over 91% of the patients had a body mass index above 30 kg/m2. The most common primary procedure was laparoscopic sleeve gastrectomy (75%), followed by gastric bypass (22.6%). In revision bariatric surgery, the majority (91.3%) had a conversion from sleeve gastrectomy to gastric bypass. Overall, 0.77% of patients were admitted to the ICU, with the majority being unplanned ICU admissions (0.52%). The average ICU stay was 21 days (1 to 54 days). The most common reason for ICU admission was sepsis, septic shock, and gastric leakage. Conclusions The results of this study show a relatively lower number of ICU admissions after bariatric surgery compared to previous studies.

Environmental friendly utilization of plant wastes in combination as a source of natural colorants for binary mordanted silk dyeing

This study investigates the absorption behavior of natural dyes on silk fabric: madder roots (red dye) and amaltas (brown dye). The dyes were extracted under optimized conditions in an acidic medium. Binary mixtures of these dyes in different proportions were employed to develop various shades. This research work has explored the impact of single as well as binary mixture of chemical mordants on the dyeing behavior of natural dyes on silk. Al (Alum), iron (Fe), and tannic acid (T.A.) were used as pre- and post-mordants. Different concentrations of the dye mixtures were used to achieve different shades. The absorption behavior of the binary mixture of natural dyes was assessed using a spectra photometer Colori-spectra SF600. The study found that the highest color strength was achieved when an acidic extract with a table salt concentration of 2 g/100 mL was applied to silk fabric at 65 °C for 55 min and subjected to microwave treatment for 6 min. The study revealed excellent results for the selected binary mixtures of chemical mordants, such as (Al + Fe), (Al + T.A.), and (Fe + T.A.), in comparison by employing single mordants such as (Al, Fe, and T.A.).

Sustainable appraisal of lac (Kerria Lacca) based anthraquinone natural dye for chemical and bio-mordanted viscose and silk dyeing

The coloring behavior of laccaic acid, a natural red dye derived from lac insects, has been investigated in this work for the dyeing of silk and viscose fabrics while being heated in MW radiation. The extract was made in an aqueous and acidic media and then used to color fabrics under microwave treatment for up to 10 min. For developing new shades, eco-friendly green bio-mordants and, in comparison, chemical mordants were employed at given conditions. The obtained results revealed that the aqueous extract after 4 min of radiation exposure produced a high color strength (K/S  =  17.132) onto silk and the aqueous extract after 6 min of radiation exposure produced better color strength (K/S  =  6.542) onto viscose at selected conditions. The fastness ratings evaluation as per ISO standards demonstrates that bio-anchors have provided good ratings under selected irradiation and dyeing conditions. It is concluded that this environmentally friendly technique has improved the natural coloration process of fabrics as well as addition of green mordants has furnished colorfast shades using lac-derived natural anthraquinone dye.

Enhancing wool dyeing with clove bud (Syzygium aromaticum) based natural dye via microwave treatment using a central composite design

This research investigates the viability of using Syzygium aromaticum (clove) as a natural dye for wool yarn through the application of microwave treatment and optimization using central composite design (CCD). As concerns grow over the environmental impact of synthetic dyes and their detrimental disposal in water bodies, the search for eco-friendly alternatives becomes imperative to revolutionize the textile industry. Microwave-assisted extraction of the colorant from clove powder is explored as an efficient and sustainable method, minimizing solvent usage and energy consumption compared to conventional techniques. To enhance colorfastness properties while eliminating the need for toxic mordants, green alternatives such as Al, Fe, and tannic acid, combined with plant phenolics from red sumac, pomegranate rind, and weld, are employed. According to the analysis of CCD, the higher color strength value 18.1653 was achieved using pH = 3, time = 50 min, temperature = 70 °C, and salt concentration = 1.5 g/100 mL. The optimized dyeing conditions also showed a maximum level of colorfastness properties of 5 for light, 5 for wash, 5 for dry rubbing, and 4 for wet rubbing. The findings from Fourier-transform infrared spectroscopy and scanning electron microscopy analyses provide valuable insights into the chemical and morphological changes induced by microwave treatment and dyeing with clove extract. The results affirm the presence of eugenol as a potential active molecule responsible for the captivating color of clove flower buds, validating its suitability as a natural dye source for wool. This study highlights the promising potential of microwave-assisted extraction and plant-based biomolecules as innovative and environmentally friendly approaches in natural dyeing, paving the way for a more sustainable future in the textile industry. Embracing these eco-friendly practices allows the textile sector to reduce its ecological footprint and contribute to a cleaner and greener environment. Further research and implementation of these techniques can foster a more harmonious coexistence with nature, ensuring a healthier ecosystem for all.

Anesthesia for awake craniotomy: a case report

Awake craniotomy (AC) is a neurosurgical technique that enables the precise localization of functional neural networks through intraoperative brain mapping and real-time monitoring. This operative method has been popularized in recent years due to decreased postoperative morbidities. We present a case of 31-year-old female who was presented with episodes of generalized tonic colonic seizures. She had a history of recurring seizures. Upon further investigations, she was diagnosed with brain space-occupying lesions initially suspected as low-grade glioma. Considering the lesion site, the patient was deemed a suitable candidate for an AC. To achieve conscious sedation, the patient received infusions of remifentanil and propofol at varying rates. During the procedure, the patient was under sedation and was regularly tested for response to predetermined commands. The tumor was successfully excised by using a combination of local anesthesia on the scalp and by the administration of propofol and boluses through a systemic infusion.

Importance of Pre-anesthetic Evaluation in Diagnosing Coexisting Asymptomatic Medical Conditions: A Report of Two Cases

The preoperative assessment of patients undergoing surgery, often conducted in pre-anesthesia clinics, plays an important role in ensuring patient safety and optimizing perioperative outcomes. This assessment aids in identifying underlying medical conditions that might otherwise remain asymptomatic until they manifest as complications during or after surgery. Through these two case reports, the importance of pre-anesthesia assessment is highlighted. The first case involves a 67-year-old male whose surgery for lymph node excision was planned. However, during the preoperative assessment, atrial fibrillation and pulmonary hypertension were identified, necessitating further intervention and treatment adjustments before surgery. In the second case, an eight-year-old child with a history of vomiting and abdominal pain planned for tonsillectomy was discovered to have congenital hypothyroidism through a vigilant preoperative evaluation. Timely intervention and consultation with an endocrinologist ensured a safe surgery without complications. These cases emphasize the role of preoperative cardiovascular assessment, the utility of electrocardiograms (ECGs), and the relevance of routine laboratory tests in reducing perioperative mortality. Hence, pre-anesthesia assessments are not mere routine steps; they are essential components of patient care that significantly impact perioperative results.

Anar Phali (Opuntia ficus) juice extract as a novel pollution-free source of natural betalain dye for wool yarn

Green products such as plant pigments in all filed are gaining fame globally due to their excellent ayurvedic and biological characteristics. In this study, microwave rays have been employed for the isolation of colorants from Anar Phali while bio-mordant have been included to get color-fast shades. The colorant was isolated in an acidic medium before and after microwave rays for 2 min. For getting darker shades with different tints, sustainable chemical and plant-based extracts as bio-mordant have been employed before and after bio coloration of wool yarn at given conditions. CIE Lab system computed in Colori-spectrophotometer (CS-410) was used to observe the change in color depth and tonal variation of dyed fabrics, and ISO standard methods have been employed to rate the colorfastness to light, washing, and rubbing at grey scale. It is concluded that microwave rays have an excellent sustainable efficacy to isolate colorant from Anar Phali powder for wool dyeing, whereas the addition of bio-mordants has made the process more sustainable and eco-friendly.

Ultrasonic-assisted sustainable pollution free advanced method for isolation of colouring material from Amba Haldi (Curcuma aromatica) for wool dyeing

The purpose of this research is to evaluate the colouring performance of Amba Haldi-based natural extracted yellowish colour for the dyeing of wool fabric using ultrasonic (US) treatments. Before and after the US treatment, the colourant was separated in aqueous and acidic solutions for up to 60 min. Scanning electron microscopy and Fourier-transform infrared spectroscopy were used to investigate the surface morphology and chemical changes in the cloth before and after radiation. On the wool fabric that was ultrasonically treated at 75°C for 45 min, an acidic extract of Amba Haldi powder after US treatment for 20 min showed good colour depth (K/S). Acacia extract (2%), pomegranate extract (1.5%) and pistachio extract (1%), when used as pre-biomordants, were shown to have excellent colour strength. Acacia (1.5%) extract, pomegranate (2%) extract and pistachio (1.5%) extract were also used as post-biomordants. As pre-chemical mordants, Al salts (1%), Fe salts (1.5%) and tannic acid salts (2%), whereas Al salts (2%), Fe salts (1%) and tannic acid salts (2%), have produced successful results as post-chemical mordants. Overall, it was discovered that pomegranate extract (2%), used as a post-bio-mordant, and salt of Fe (1.5%), used as a post-chemical mordant, both exhibit exceptional colour strength. Ultrasonic treatment, a procedure that is harmless for the environment, has only served to increase the colour strength of dye on wool fabric, and the addition of bio-mordants has made the process more sustainable.

Eco-friendly microwave assisted sustainable coloration of silk and wool fabric with Acid Blue 07 dye

Environment-friendly textile processing is the demand of the current global scenario, where the application of sustainable technologies such as microwave radiation has been gaining fame in all global fields due to their green and human-friendly nature. This study has been conducted to employ sustainable technology such as microwave (MW) rays for dyeing polyamide-based proteinous fabric using Acid Blue 07 dye. The fabric before and after MW treatment for up to 10 min has been dyed using an acid dye solution. Spectrophotometric analysis of the dye solution was performed before and after irradiation at a specific selected level. Using selected dyes and irradiation conditions, a series of 32 experiments using a central composite design has been employed. The shades made at selected conditions of irradiation and dyeing were assessed for colorfastness as per ISO standards. It was observed that for dyeing silk, 55 mL of Acid Blue 07 dye solution containing 1 g/100 mL salt solution at 65 °C for 55 min should be employed after MW treatment for 10 min. In comparison, for dyeing wool, 55 mL of Acid Blue 07 dye solution containing 2 g/100 mL salt solution at 65 °C for 55 min should be employed after MW treatment for 10 min. Physiochemical analysis shows that sustainable tool has not altered the chemical nature of fabric but has modified the fabric surface physically to enhance uptake ability. Colorfastness shows that the shades made have offered good resistance to fade and have given good to excellent ratings on the gray scale.

Acute Pancreatitis (AP) in Pregnancy and Its Complications From an Anesthesia Perspective: A Case Report

Acute pancreatitis (AP) is a rare event in pregnancy that is characterized by a sudden and severe inflammation of the pancreas. The clinical manifestation of AP during pregnancy is highly variable ranging from a mild form to a severe and potentially life-threatening presentation. We share a case of a 29-year-old female (gravida II, para I) who presented in her 33rd gestational week. The patient complained of upper abdominal pain and nausea. Her previous history revealed that she had four episodes of vomiting (food-containing, non-projectile) at home. Her uterine tone was normal, and her cervix was closed. Her white blood cell count was 13,000/mm3, and her C-reactive protein (CRP) level was 65 mg/L. She underwent an emergency laparotomy due to suspected acute appendicitis; however, no peritonitis was found intraoperatively. Further blood tests showed high levels of triglyceride at 87.5 mmol/L. The electrophoretic pattern of lipoprotein was consistent with type V hyperlipoproteinemia. An abdominal computed tomography (CT) confirmed the diagnosis of acute pancreatitis. During follow-up after one month, the patient showed triglyceride levels at 4.75 mmol/L and cholesterol at 6.07 mmol/L. Acute pancreatitis due to hypertriglyceridemia is a rare finding; nonetheless, it should be considered as a potential etiology in pregnant patients with nonobstructive abdominal pain.

Adherence to the Antibiotic Prophylaxis Guidelines for Appendectomy in Bahrain: An Observational Study

Background Appendicitis is a common clinical problem that has multifactorial etiologies. Accounting for almost 1 million hospital days per year, it poses serious health hazards. If not treated on time, it may burst. Surgical intervention is the best option in such cases. Prophylactic use of antibiotics has been shown to reduce post-operative infections. Methodology This prospective observational study aimed to evaluate the adherence to the antibiotic prophylaxis guidelines for appendectomy in patients admitted to the surgical department at Salmanyia Medical Complex in Bahrain from January to August 2020. From the electronic records of these patients, information was extracted and evaluated regarding demographic data, the type of antibiotics given for prophylaxis, the timing of the administration of the antibiotics, and any alternative antibiotic given based on local hospital guidelines. Results The current study revealed that the majority of the patients (98%, N=273) admitted to the Salmanyia Medical Complex, Bahrain, were not administered the antibiotics within the prescribed time (30-60 minutes) as per hospital guidelines. Also, the antibiotics administered for prophylaxis prior to the appendectomy procedure were not according to the guidelines, i.e., Cefazolin 1g with Metronidazole 500 mg. Out of a total of 278 patients included in the study, none were administered the right choice as provided by the local guidelines. Second, 1.8% of patients (5 out of 278) were not administered any antibiotics for prophylaxis prior to the surgical procedure for appendicitis. Conclusion The study concluded that most patients were not administered antibiotics according to the local guidelines of the hospital.

Alkanna tinctoria-based sustainable alkanin natural colorant for eco-dyeing of wool

The awareness of sustainability and widespread utilization of green technologies in textile dye houses are revolutionizing not only textile industries but related fields. The current study is concerned with ultrasonic (US)-assisted utilization of extracts of Alkanna tinctoria (a source of natural alkanin dye) for wool dyeing. The extracts are obtained in various media, and both extracts and wool fabrics have been  US treated for 15-60 min. Dyeing is performed by applying variable parameters and utilizing herbal-based extracts as a source of bio-mordant, hence improving the fastness rating and enhancing color strength. Good color strength and fastness ratings are obtained using irradiated extract at 4 pH when the US-treated wool fabric is dyed at 65 °C for 60 min before and after chemical and bio-mordanting. For comparative studies, chemical mordants are also employed. In contrast to chemical mordants, the bio-mordants have made the dyeing process more sustainable with good to excellent fastness rating.

Environmental friendly silk and cotton dyeing using natural colorant of Bougainvillea (Bougainvillea glabra) flowers: the sustainable approach towards textile industry

For the current study, Bougainvillea flowers as environment friendly sustainable source of plant-based natural dye have been selected as an alternative to toxic synthetic dyes for dyeing of cotton and silk. Natural colorant from Bougainvillea flowers (Bougainvillea glabra) was extracted using aqueous and acidic extraction media. Maximum colorant was extracted in aqueous medium, and further it was used for cotton and silk dyeing. The optimum values of the dyeing parameters including dyeing time, dye to liquor ratio and salt level as exhausting agent were found to be 30 min, 35-mL liquor ratio and 3.0 g for cotton and for silk 45 min dyeing time, 45-mL liquor ratio and 3.0 g exhausting agent in aqueous dye extract. Bio mordanting has been applied to attain a variety of color shades. The utilization of 3% of henna, 4% of turmeric for silk pre-mordanting and for post-mordanting turmeric at 3% and henna at 4% for silk gave a darker shade. For cotton bio mordanting, 2% turmeric rhizome powder, 3% henna leaves powder extract as pre-mordant and 2% turmeric, 3% henna as post-mordant has developed a variety of shade. Overall, it has been found that natural colorant from Bougainvillea flowers is the new dye source for bio-coloration of natural fabrics, and addition of bio mordants has made the process more calming and eco-friendly.

Eco-friendly acid dyeing of silk and wool fabrics using Acid Violet 49 dye

The effluent load from textile industries has forced traders and industrialists to use sustainable tools that not only save energy, money, and labor but also make the process cleaner. The purpose of this study is to improve the dyeing of proteinous fabrics using Acid Violet 49 dye under microwave radiation. Aqueous and acidic dye solutions were prepared and treated with MW radiations for up to 10 min. MW treated and untreated dye solutions were used to color treated and untreated fabrics to observe color yield. It has been found that dyeing of irradiated silk at 65 °C for 35 min, using 55 mL of irradiated dye solution containing 1 g/100 mL salt, has given excellent results. Whereas good color characteristics are obtained if irradiated wool fabric is dyed at 85 °C for 55 min, using 55 mL irradiated dye solution using 1 g/100 mL salt. Physicochemical analysis reveals that MW rays have physically modified the fabric without altering its chemistry. ISO standard methods employed for colorfastness show that under optimal conditions, the color developed is fast; statistical analysis shows that the dyeing process has given significant results. It is concluded that MW rays have excellent potential to improve acidic dyeing of proteinous fabric under mild conditions which show that the utilization of MW rays is a cost-, time-, and energy-effective process.

Environmental friendly pollution free bio-dyeing of wool with haar singhar (Coral Jasmine) flower extract

The world's move towards revival of eco-labelled products has created a huge urge to explore new means which are healthier for the global community. Among such means, plant-based bio-pigments for coloration of matrix are gaining worldwide fame, particularly in the textile sector. For the purpose of appraising new source of eco-friendly dyes, using microwave irradiation techniques, Coral Jasmine flowers have been explored for the bio-dyeing of wool. The colorant was extracted in acidic medium owing to nature of fabric, and both stuffs have been exposed to microwave treatment up to 5 min. Bio-coloration of MW irradiated and unirradiated wool was done using MW irradiated and unirradiated extract for observing high yield. Central composite design (CCD) as statistical method was utilized to see the significance of dyeing parameters chosen for mordanting to develop colorfast shades. Different concentrations of sustainable chemicals and bio-mordants as per weight of fabric were employed to introduce new shades with improved colorfastness properties. International standard textile methods determining shade permanency (fastness) have been employed onto selected dyed-mordanted fabrics. Good yield of colorant was observed when MW irradiated wool fabric was dyed at 75 °C for 45 min with extract of 7 pH, having 1.5g/100 mL of salt solution; the promising color yield was observed. As per gray scale ratings observed after ISO standard methods, pine nut as bio-mordant and iron salt as chemical mordant have developed colorfast shades. Conclusively, it can be recommended that methods for the isolation of colorants from new dye yielding plants, MW heating method as suitable clean technology and medicinal-based bio-mordants should be employed for getting permanent gamutes.

Assessment of wild turmeric-based eco-friendly yellow natural bio-colorant for dyeing of wool fabric

The current study has been designed to observe the coloring efficacy of wild turmeric-based natural yellowish colorant for wool dyeing under microwave (MW) treatments. Extracts and fabrics have been exposed to MW treatment for up to 10 min. Surface morphology and changes in the fabric's chemical nature before and after radiation have been studied through SEM and FTIR, respectively. The results obtained after a series of experiments show that using 45 mL of aqueous extract (pH = 5) in the presence of 1.5g/100mL of table salt as an exhausting agent at 75°C for 45 min has displayed outstanding color depth (K/S) onto microwave-treated wool fabric. On applying biomordants, it has been found that acacia extract (1.5%), pomegranate (2%), and pistachio extracts (1.5%) before dyeing, whereas acacia (1%), pomegranate (1%), and pistachio extracts (2%) after dyeing, have shown colorfast shades of high strength. Comparatively, salts of Al (1.5%) and Fe (1%), and T.A (2%) before dyeing, while salts of Al (1%) and Fe (1.5%) and T.A (1.5%) after dyeing, have given the best results. Generally, it has been originated that salt of Fe (1.5%) as a post-chemical mordant and pomegranate extract (1.5%) as a post-bio-mordant have displayed wonderful color strength. It very well may be inferred that MW treatment, being naturally protected, has just superior the varying strength of colorants on wool fabric. Adding biomordants has transformed the strategy into a more sustainable one.

Sustainable eco-friendly extraction of yellow natural dye from haar singhar (Nyctanthes arbor-tritis) for bio coloration of cotton fabric

 The revival of natural dyes in different walks of life is due to stringent environmental standards imposed by many associations. For current studies, flowers of haar singhar (Nyctanthes arbor-tritis) has been chosen for bio-dyeing of cotton fabric using microwave irradiation techniques. For this purpose, liquid extracts and fabrics were exposed to microwave for 5 min at various conditions. These treated and un-treated dye extracts obtained in respective media were employed to dye the radiated and non-radiated cotton fabrics. The characterization of extract and untreated and undyed irradiated fabrics samples was done through FTIR. Different dyeing variables were optimized under CCD response surface methodology as a statistical tool. With the introduction of new shades and improvement of colorfastness properties, different concentrations of sustainable chemical and bio-mordant were employed. All dyed cotton fabrics were exposed to CIE-color space system for estimation of color coordinates and color strength by using spectra flash SF600 and to rate colorfastness properties using ISO standard methods for light, dry and wet rubbing, washing fastness. Cotton fabric was dyed with haar singhar flower extract of 7 pH from 4 g of powder, using 1.5 g/100 mL salt solution at 60 °C for 30 min. To get acceptable shades, aqueous extract after microwave treatment for 4 min provided excellent color strength. Pistachio (K/S = 3.6342) is a bio-mordant with great results, and aluminum (K/S = 4.8205) is a chemical mordant with outstanding results. It is found that green methods for isolation of colorant and green mordants for getting new shades should be employed.

Sustainable natural coloring potential of bitter gourd (Momordica charantia L.) residues for cotton dyeing: innovative approach towards textile industry

Natural products particularly natural colorants have attained worldwide importance and being eco-friendly can be considered an alternative to toxic dyes in order to reduce environmental pollution. The current study is based on the exploration of natural coloring behavior of bitter gourd leaves extract for cotton dyeing. Colorant was extracted using different extraction media like aqueous, alkali, organic, and acidic at different conditions. It has been found that on application of 50 ml of acidic extract having 6 g/100 ml of table salt for 55 min at 60 C°, maximum color yield has been obtained onto cotton. Upon using chemical and bio-mordants, new shade with good color fastness rating was obtained. FTIR analysis of extract showed the presence of flavonoids. It is concluded that under mild condition, bitter gourd leaves extract can be considered potential source of natural colorant for cotton dyeing and the presence of bio-mordant has made the process more soothing and sustainable in nature.

Environmental-friendly extraction of Peepal (Ficus Religiosa) bark-based reddish brown tannin natural dye for silk coloration

The present study aims to extract a natural reddish brown colorant from Peepal (Ficus religiosa) for silk dyeing using the microwave radiation process (MW). The colorant was isolated in aqueous and acidic media, and MW treatment for 1, 2, 3, 4, and 5 min has been given to both fabric and extract to observe changes in color intensity. The dye variables have been optimized, and for sustainable shade making process with good fastness, 1.0-5.0 g/100 mL of sustainable chemical and bio-mordants has been employed. It has been found that after microwave treatment for 3 min, under selected conditions, the irradiated aqueous extract has given high color intensity onto silk fabric. The utilization of 3% of Al, 4% of Fe, and 2% of tannic acid (T.A.) as pre chemical mordant whereas 4% of Al, 4% of Fe, and 3% of tannic acid as post chemical mordant have given good color characteristics. In comparison, 4% of acacia and 3% of turmeric and pomegranate while 3% of acacia and turmeric and 4% of pomegranate extracts as post-bio-mordant have given excellent color characteristics. It is concluded that MW treatment has an excellent sustainable efficacy to isolate colorant from Peepal bark for silk dyeing, whereas the inclusion of bio-mordants has not only made the process more sustainable and environmental friendly but also best K/S, and L*a*b* values have been acquired.

Sustainable isolation of licorice (Glycyrrhiza glabra L.)-based yellow natural colorant for dyeing of bio-mordanted cotton

Sustainability in the utilization of products in all fields particularly food textiles, solar cells, etc. is of prime concern to the global community. In this study, licorice (Glycyrrhiza glabra L.) as a source of herbal-based coloring agent for cotton dyeing has been explored under the influence of ultrasonic (US) waves. Methanolic extract of licorice bark after US treatment for 20 min has shown excellent color depth (K/S) onto ultrasonically treated cotton fabric at 65°Cfor 45 min. Applying bio-mordants, it has been found that acacia extract (1%), henna (5%), and pomegranate and turmeric extracts (7%) as pre-bio-mordant, whereas acacia, turmeric, and henna extracts (7%) and pomegranate extract (5%) as post-bio-mordants, exhibited superb color strength. Salts of Al (7%) and salts of Fe (3%) as pre chemical mordants, while salts of Al (3%) and salts of Fe (5%) as post chemical mordants, have given good results. Overall, it has been found that salt of Fe (3%) as pre-chemical mordant and extract of turmeric (7%) as post bio-mordant have shown superb color strength. It can be concluded that US treatment being an environmentally safe means has only improved the color strength of colorant onto cotton fabric and the adding of bio-mordants has contrived the method more sustainable.

Waste black tea leaves (Camelia sinensis) as a sustainable source of tannin natural colorant for bio-treated silk dyeing

Environmentally friendly products are the need of the hour, particularly in this pandemic situation because synthetic products need such toxic chemicals for their formulation and finishing which are carcinogenic for the globe. The current study is the utilization of waste black tea leaf (BT)-based tannin brown natural colorant for silk dyeing using microwave treatment. Dye (tannin) has been isolated in various media before and after microwave treatment up to 6 min and applied at various conditions. It has been found that 30 mL of aqueous extract of 3.0 pH obtained from 6.0 g of powder containing 3.0 g/100 mL of salt as an exhausting agent after microwave treatment for 5 min, when employed at 55 °C for 45 min, has given good color yield onto silk. Iron (3%) and acacia extract (2%) as pre-chemical and bio mordant, iron (2%) and pomegranate extract (2%) as post chemical and bio-mordant, and Al (3 %) and pomegranate extract (3%) as meta chemical and bio-mordant have given new shades with good to excellent fastness ratings. It is inferred that waste black tea leaves (BTs) in an aqueous medium have an excellent potential to serve as a source of natural tannin brown dye for the coloration of surface-modified silk fabrics under the influence of cost, energy, and time-effective microwave treatment. Additionally, the utilization of a low amount of sustainable chemical and bio-mordants has valorized the dyeing of silk by developing soothing and sustainable shades with good fastness properties.

Sustainable application of Cassia obovata-based chrysophanic acid as potential source of yellow natural colorant for textile dyeing

In the current pandemic scenario, sustainable green products particularly antiviral, antioxidant, and antibacterial in nature are gaining worldwide fame in almost every walk of life. Cassia obovata (C. obovata) has been valorized as a source of yellow natural dye for nylon dyeing. For the isolation of dye extracts and for surface tuning, nylon fabrics were treated with microwave rays up to 10 min. For getting new shades with good to excellent fastness characteristics, sustainable bio-mordants in comparison with chemical mordants have been used at 60 °C, 70 °C, and 80°C. It has been found that for getting effective colorant yield, acidic extract should be exposed to MW ray treatment up to 6 min, and for getting improved fastness rating, bio-mordants have given excellent color characteristics. Statistical optimization of dyeing variable shows that application of 40 mL of C. obovata acidic extract of RE of 6 pH containing 3 g/100 mL of salt when employed at 55 °C for 45 min has given excellent results onto irradiated nylon fabric (RNF). It is inferred that Cassia obovata has an excellent potential for coloration of surface-modified fabrics, where the application of low amount of bio-mordants under statistical optimized conditions has made process more ecological, economical, and sustainable.

Eco-friendly approach towards isolation of colorant from Esfand for bio-mordanted silk dyeing

Sustainability in all applied fields particularly in textiles is to protect our globe, environment, and community, where green dyed products are playing their role. For the current study, Esfand (Peganum harmala) has been explored using a green isolation tool, i.e., ultrasonic (U.S.) rays, and applied onto fabric. Different dyeing parameters have been explored statistically through response surface methodology by employing temperature (50-80°C), time (25-65 min), extract volume (15-55 mL), salt (1-5 g/100 mL), and dye bath pH (4-7) through series of experiments. For developing new shades, green mordants such as elaichi, neem, turmeric, and zeera have been utilized. It has been found that exposure of 35 mL extract of 7 pH containing 3 g/100 mL of salt as exhausting agent to U.S. rays for 30 min for the dyeing of silk at 70°C for 45 min has given maximum color strength with reddish-yellow shades. Color characteristics obtained in the CIE Lab system reveal that 5% of turmeric as meta bio-mordant has given good quality reddish-yellow shades. It is found that U.S. rays have not only good potential to isolate colorant followed by dyeing of silk under reduced condition but also the application of bio-mordants have made the process more greener, sustainable, and cleaner.

Ecofriendly application of coconut coir (Cocos nucifera) extract for silk dyeing

The worldwide resurgence of natural dyes in all fields is due to the carcinogenic effects of effluent loads shed by synthetic industries. Coconut coir (Cocos nucifera) containing tannin as a source of natural colorants has been selected for coloration of bio-mordanted silk under the influence of ultrasonic radiations at various dyeing conditions. For extraction of tannin dye from cocos powder, different media were employed, and dyeing variables such as dyeing time, dye bath pH, dyeing bath temperature, and the effect of salts on dyeing were optimized. For achieving new shades with excellent color characteristics, bio-mordants in comparison with chemical mordants were employed. It has been found that acid-solubilized extract after ultrasonic treatment for 45 min has yielded high color strength, when coconut coir extract of 4 pH from 6g of cocos powder, containing 5g/100mL salt solution as exhaust agent, was used to dye silk at 75°C for 65 min. Among bio-mordants turmeric (K/S=13.828) and among chemical mordants iron has shown excellent results (K/S=2.0856). Physiochemical analysis of fabric before and after US treatment shows that there is no change in the chemical structure of the fabric. It is found that ultrasonic waves have excellent potential to isolate the colorant followed by dyeing and environmental friendly mordanting at optimal conditions, but also the usage of herbal-based plant anchors, i.e., bio-mordants, has made the natural dyeing process more sustainable and clean.

Exploring natural colorant behavior of husk of durum (Triticum durum Desf.) and bread (Triticum aestivum L.) wheat species for sustainable cotton fabric dyeing

Revival of natural colorants in textile dyeing is one of the important strategies to reduce synthetic chemical-based environmental pollution. The study has been conducted to explore the coloring potential of durum (Triticum durum Desf.) and bread (Triticum astivum L.) wheat husk for fabric dyeing. The results showed that both wheat species husk could be an excellent source of natural dye, if extracted in alkaline medium. It has been observed that durum wheat husk based dye worked best at 70°C with a pH 11.0 and salt concentration of 8.0 g/100 ml of solution. Similarly, alkaline extract of bread wheat husk worked better at 80°C with dyeing solution pH 9.0 and salt concentration of 8.0 g/100 ml. Bio-mordanting experiments results revealed pomegranate rind (7%) as most effective bio-mordant to obtain high color strength of wheat husk treated fabric. In chemical-mordanting, tannic acid (5%) as pre-mordant and chrome (5%) as post-mordant have improved the color strength more than all other quantities of employed mordants. FTIR analysis indicated the presence of flavonoids as major colorant compounds in wheat husk-based natural dye. Suggested ISO standards for colorfastness illustrated good color strength ratings of husk-based dyed fabric when treated with bio-mordants as compared to chemical counterparts. Hence, husk of both bread and durum wheat species has great potential to be used as source of eco-friendly natural colorant for cotton dyeing.

Environmental friendly sustainable application of plant-based mordants for cotton dyeing using Arjun bark-based natural colorant

Ecofriendly exploration of Arjun bark (Terminalia arjuna) is a herbal natural colorant for cotton dyeing. This is because the demand for natural dyes has been increased worldwide due to their therapeutic usage and other food, textiles, agriculture, engineering, and medical applications. Therefore, this study has been carried out due to the isolation of colorant from Arjun bark in an acidified methanolic medium after exposure to ultrasonic rays up to 60 min. Additionally, using bio-mordants, it has been found that the application of 10% of Zeera (Cuminum cyminum) extract as meta-bio-mordant, 3% of Ilaichi (Elettaria cardamomum) extract as meta-bio-mordant, and10 % of Harmal (Peganum harmala) and Neem (Azadirachta indica) extract as meta-bio-mordants has given excellent color strength. These bio-mordants have not only made the coloration process more eco-friendly, viable, and greener, but also improved color strength with various tonal effects from red to reddish brown shades. Thus, it has been found that ultrasonic treatment as an environment-friendly tool has not only enhanced the color strength of natural colorant isolated from Arjun bark onto the cotton fabric under mild conditions.

Environmental friendly extraction of walnut bark-based juglone natural colorant for dyeing studies of wool fabric

Environmental friendly products particularly natural dyes are going to be much popular around the globe due to their non-toxic and bio-degradable nature. The current study was planned to enhance the dyeability of walnut bark having juglone as a reddish-brown natural dye under ultrasonic radiation as an environment-friendly and green tool After conducting series of experiments, it has been found that wool (RW) and extract (RE) after ultrasonic treatment for 45 min, when dyed for 45 min at 55°C using an acidic bath of 3 pH has given good color strength on the wool fabric. To develop the new shades, sustainable and eco-label chemicals (Fe, Al, and tannic acid) and four bio-mordants such as Acacia bark, Turmeric, Henna, and Pomegranate were also applied at optimum conditions. It is studied that 3% of turmeric extract as pre-bio-mordant and 5% of Acacia extract as post-bio-mordant has given excellent color characteristics as compared to their synthetic. It is concluded that ultrasonic treatment being an eco-friendly tool has a great potential to improve the dyeability of natural reddish-brown dye from walnut bark and the inclusion of sustainable biosources as a color modifier has value-added the natural dyeing process with excellent color ratings.

Sustainable Dyeing of Cellulosic Fabric with Reactive Violet H3R dye: Ultrasonic Assisted Improvement in Color Characteristic

Abstract. Ultrasonic radiation (U. S.) is the sustainable and green technology which has transformed the domain of textiles. In the current study, ultrasonic treatment was employed to improve the reactive dyeing of cellulosic fabricby Violet H3R dye. For this purpose, U.S. treatment has been given to both solution & fabric upto 50 min. at 30 to 60 oC. Promising results were obtained when cellulosic fabric was exposed to U.S. treatment at at 50 oC for a period of 30 min. using dye bath of 55 mL having 7.5 pH. Glauber salt (8 g/L) was employed as an exhausting agent at 60 oC for 55 min. Various shades of cotton fabric dyed at optimal conditions were obtained which showed that U.S. treatment has enhanced not only the colour strength but also  the fastness rating from medium to outstanding. So, it can be concluded from the current study that U. S. treatment is not only good enough for improving the dyeing aptitude of Reactive Violet H3R dye but it also uplifts the color features of dyed cotton fabric.   Resumen. La radiación ultrasónica (U:S. por sus siglas en inglés) es la tecnología sostenible y verde que ha transformado el campo de los textiles. En este estudio, se llevó a cabo un tratamiento ultrasónico para mejorar el teñido reactivo de tela celulósica por el tinte Violet H3R. Para este propósito, se llevó a cabo un tratamiento con ultrasonido tanto a la solución como a la tela por hasta 60 minutos a 30 y 60 oC. Se obtuvieron resultados prometedores cuando la tela celulósica se expuso a un tratamiento con ultrasonido a 50 oC durante un período de 30 min, utilizando un baño de tinte (de 55 mL) a pH 7,5 de sal de Glauber (8 g/L). Estas condiciones representan un sistema de agotamiento, aplicado a 60 oC durante 55 min. Se obtuvieron varios tonos de tela de algodón teñidos en condiciones óptimas, lo que mostró que el tratamiento por ultrasonido mejora no solo la intensidad del color sino también el índice de solidez de media a sobresaliente. Por lo tanto, del estudio actual se puede concluir que el tratamiento con ultrasonido no solo es lo suficientemente bueno para mejorar la capacidad de teñido del tinte Reactive Violet H3R, sino que también realza las características del color de la tela de algodón teñida.

Impact of intra-articular local anesthesia infiltration versus femoral nerve block for postoperative pain management in total knee arthroplasty

Background:

Postoperative pain relief after total knee arthroplasty (TKA) can be attained by using several techniques such as intravenous analgesia, epidural analgesia, and peripheral nerve blocks that include femoral nerve and saphenous nerve. Several authors recommended intra-articular injection of local anesthetic (IALA) as a part of multimodal analgesia regimens for TKA instead of other techniques.

Aims:

The present study compares IALA technique efficacy with single-shot femoral nerve block (FNB) as part of multimodal analgesia regimen in TKA patients for postoperative pain management.

Setting and Design:

Perioperative care, randomized double-blind comparative study.

Subjects and Methods:

We recruited a total of 60 patients scheduled for unilateral total knee replacement under spinal anesthesia. Subjects were allocated randomly into two groups FNB and IALA receiving ultrasound-guided FNB and Intra-articular local anesthesia and morphine mix infiltration, respectively. Twenty-four hour postoperative morphine consumption through patient-controlled analgesia was the primary outcome measure in our study. Secondary outcome measures were pain scores, nausea and vomiting.

Statistical Analysis:

Chi-square test, Mann–Whitney test.

Results:

The amount of morphine consumed at the end of 24 h was noted to be higher in IALA group as compared to FNB (FNB − 16.03 ± 9.37 mgs; IALA − 23.60 ± 13.73 mgs P = 0.03). Visual analog score at 24 h with knee flexion was better in FNB group (FNB − 1.27 ± 1.43; IALA 2.42 ± 2.54, P = 0.04).

Conclusion:

FNB technique provides better analgesia in comparison to IALA for postoperative pain management in terms of PCA morphine consumption.

Sustainable application of cochineal-based anthraquinone dye for the coloration of bio-mordanted silk fabric

Natural colors particularly animal-based colorants are employed in the field of cosmetics, food, and flavors and also gaining popularity in textiles, due to their soothing nature. In this study, the microwave-assisted extraction of colorant from cochineal insects for dyeing of bio-mordanted silk has been carried out. Acidic, methanolic, and acidified methanol solubilized media were used to extract the natural colorant from cochineal under microwave irradiation for 1-6 min. Bio-mordants have been employed at optimized conditions to make the process greener and sustainable. It is found that acid solubilized extract of pH 4, employed at 55 °C for 55 min containing 5 g/100 mL of Glauber's salt as exhausting agent has given high color strength onto microwave-treated silk fabric. Suggested ISO standards for colorfastness have revealed that bio-mordants have given excellent color depth and excellent rating of fastness properties, compared with chemical mordants used. It is found that microwave treatment has not only improved the dyeing behavior of colorant extracted from cochineal in acid solubilized medium but also enhanced the color characteristics onto bio-mordanted silk fabric.

Sustainable Dyeing of Microwave Treated Polyester Fabric using Disperse Yellow 211 Dye

The aim of current work is to evaluate the dyeing performance of newly introduced disperse dye to improve its dyeing behavior onto polyester fabric using microwave radiation. Microwave heating has promisingly improved the disperse dyeing of polyester fabrics. Disperse Yellow 211 (DY 211) has been used to dye the polyester fabric under the influence of microwave treatment. Both the fabric and dye solution, were treated with the microwaves for 1- 6 min. Different dyeing parameters such as temperature, time, dispersant and dye bath volume were also optimized and ISO standard methods for colorfastness were employed to rate the influence of microwave and ultraviolet treatment on disperse dyeing. It is found that microwave treated polyester (RP, 6 min), has given good color strength and darker shades upon dyeing at 90°C for 40 min. in the presence of 2 g/100ml of dispersant using 70 mL of irradiated dye solution (RS, 6 min) of pH 8. Similarly using dye bath of pH 11, microwave treated polyester (RP, 6 min.) has given good color strength and darker shades upon dyeing at 70°C for 35 min.in the presence of 1 g/100ml of dispersant. using 50 mL of irradiated dye solution (RS). ISO standards for fastness to light, washing and rubbing revealed that good to excellent ratings have been obtained from different shades dyed at optimal condition. It is inferred that Microwave treatment has not only reduced the dyeing conditions but also improved the color characteristics of dyed polyester fabric.

Microwave-assisted extraction and dyeing of chemical and bio-mordanted cotton fabric using harmal seeds as a source of natural dye

The revival of cultural heritage in a form of natural colorants for textile dyeing is gaining popularity due to their soothing nature and bright shades. The present study was conducted to explore the coloring potential of harmala (Peganum harmala) seeds and to improve color strength of dye using microwave radiations followed by a mordanting process. The results showed that harmala plant seeds could be an excellent source of natural dyes for cotton dyeing if the irradiated acidified methanolic extract (RE, 4 min) is used to dye un-irradiated fabric (NRC) at 85 °C for 45 min using a dye bath of pH 9.0 having salt concentration of 7 g/100 mL. Alum (1%) as pre-mordants and iron (7%) as post-mordants have improved the color strength in chemical mordanting more than other mordants employed. The bio-mordants employed reveal that 10% of acacia as pre-bio-mordants and 7% of acacia as post-bio-mordants are effective amounts to obtain high color strength. Suggested ISO standards for colorfastness illustrate that bio-mordanting has given more excellent rating as compared to chemical mordants. It is concluded that harmala seeds have a great potential to act as a source of natural colorant for cotton dyeing under the influence of microwave radiation.

Microwave-assisted enhancement of milkweed (Calotropis procera L.) leaves as an eco-friendly source of natural colorants for textile

Application of natural colorants to textile fabrics has gained worldwide public acceptance due to the hazardous nature of synthetic dyes. Present study investigated the microwave's mediated extraction of natural colorants from leaves of milkweed (Calotropis procera L.) as well as their application to cotton fabrics assisted with biochemical mordants. Dye extraction from C. procera leaves was carried out in various mediums (alkali and aqueous), and the extracted dye as well as cotton fabrics was irradiated with microwaves for 2, 4, 6, 8, or 10 min. Effect of various temperature regimes and sodium chloride (NaCl) concentrations was also evaluated on the color strength of dyed cotton fabrics. The results revealed that extraction of natural colorants was enhanced when microwave radiations were applied for 4 min by using alkali as an extraction medium as compared to aqueous one. Optimum dyeing of cotton fabrics was achieved by using NaCl at a temperature of 55 °C. Among the chemical mordants, iron was effective for better color strength when used as pre- and post-mordant. Among the studied bio-mordants, extract of Acacia nilotica bark significantly improved the color strength and fastness properties as pre-mordant and Curcuma longa tuber as post-mordant. It was concluded that extract of C. procera leaves was a potential source of natural colorants and a high level of dye was obtained upon irradiation of alkali-solubilized extract for 4 min. Application of NaCl at concentration of 3 g/100 mL and temperature treatment of 55 °C significantly improved the color strength of dyed cotton fabrics.