Synthesis of a Grease Thickener from Cashew Nut Shell Liquor

Thickener, also known as a gelling agent, is a critical component of lubricating greases. The most critical property of thickener, temperature resistance, is determined by the molecular structure of the compounds. Currently, all high-temperature-resistant thickeners are based on 12-hydroxystearic acid, which is exclusively produced from castor oil. Since castor oil is also an important reagent for other processes, finding a sustainable alternative to 12-hydroxystearic acid has significant economic implications. This study synthesises an alternative thickener from abundant agricultural waste, cashew nut shell liquor (CNSL). The synthesis and separation procedure contains three steps: (i) forming and separating calcium anacardate by precipitation, (ii) forming and separating anacardic acid (iii) forming lithium anacardate. The obtained lithium anacardate can be used as a thickener for lubricating grease. It was found that the recovery of anacardic acid was around 80%. The optimal reaction temperature and time conditions for lithium anacardate were 100 °C and 1 h, respectively. The method provides an economical alternative to castor and other vegetable oils. The procedure presents a simple pathway to produce the precursor for the lubricating grease from agricultural waste. The first reaction step can be combined with the existing distillation of cashew nut shell processing. An effective application can promote CNSL to a sustainable feedstock for green chemistry. The process can also be combined with recycled lithium from the spent batteries to improve the sustainability of the battery industry.

Comparison between Cashew-Based and Petrochemical Hydroxyoximes: Insights from Molecular Simulations

Solvent extraction has been ubiquitously used to recover valuable metals from wastes such as spent batteries and electrical boards. With increasing demands for energy transition, there is a critical need to improve the recycling rate of critical metals, including copper. Therefore, the sustainability of reagents is critical for the overall sustainability of the process. Yet, the recycling process relies on functional organic compounds based on the hydroxyoxime group. To date, hydroxyoxime extractants have been produced from petrol-based chemical feedstocks. Recently, natural-based cardanol has been used to produce an alternative hydroxyoxime. The natural-based oxime has been employed to recover valuable metals (Ga, Ni, Co) via a liquid/liquid extraction process. The natural compound has a distinctive structure with 15 carbons in the alkyl tail. In contrast, petrol-based hydroxyoximes have only 12 or fewer carbons. However, the molecular advantages of this natural-based compound over the current petrol-based ones remain unclear. In this study, molecular dynamics simulation was employed to investigate the effect of extractant hydrocarbon chains on the extraction of copper ions. Two hydroxyoxime extractants with 12 and 15 carbons in the alkyl chain were found to have similar interactions with Cu²⁺ ions. Yet, a slight molecular binding increase was observed when the carbon chain was increased. In addition, lengthening the carbon chain made the extracting stage easier and the stripping stage harder. The binding would result in a lower pH in the extraction step and a lower pH in the stripping step. The insights from this molecular study would help design the extraction circuit using natural-based hydroxyoxime extractants. A successful application of cashew-based cardanol will improve the environmental benefits of the recycling process. With cashew-producing regions in developing countries, the application also improves these regions' social and economic sustainability.

Plant-derived saponin enhances biodegradation of petroleum hydrocarbons in the rhizosphere of native wild plants

Plant-derived saponins are bioactive surfactant compounds that can solubilize organic pollutants in environmental matrices, thereby facilitating pollutant remediation. Externally applied saponin has potential to enhance total petroleum hydrocarbon (TPH) biodegradation in the root zone (rhizosphere) of wild plants, but the associated mechanisms are not well understood. For the first time, this study evaluated a triterpenoid saponin (from red ash leaves, Alphitonia excelsa) in comparison to a synthetic surfactant (Triton X-100) for their effects on plant growth and biodegradation of TPH in the rhizosphere of two native wild species (a grass, Chloris truncata, and a shrub, Hakea prostrata). The addition of Triton X-100 at the highest level (1000 mg/kg) in the polluted soil significantly hindered the plant growth (reduced plant biomass and photosynthesis) and associated rhizosphere microbial activity in both the studied plants. Therefore, TPH removal in the rhizosphere of both plant species treated with the synthetic surfactant was not enhanced (at the lower level, 500 mg/kg soil) and even slightly decreased (at the highest level) compared to that in the surfactant-free (control) treatment. By contrast, TPH removal was significantly increased with saponin application (up to 60% in C. truncata at 1000 mg/kg due to enhanced plant growth and associated rhizosphere microbial activity). No significant difference was observed between the two saponin application levels. Dehydrogenase activity positively correlated with TPH removal (p < 0.001) and thus this parameter could be used as an indicator to predict the rhizoremediation efficiency. This work indicates that saponin-amended rhizoremediation could be an environmentally friendly and effective biological approach to remediate TPH-polluted soils. It was clear that the enhanced plant growth and rhizosphere microbial activity played a crucial role in TPH rhizoremediation efficiency. The saponin-induced molecular processes that promoted plant growth and soil microbial activity in the rhizosphere warrant further studies.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Phosphorus application enhances alkane hydroxylase gene abundance in the rhizosphere of wild plants grown in petroleum-hydrocarbon-contaminated soil

This study assessed the ability of phosphorus (P) fertilizer to remediate the rhizosphere of three wild plant species (Banksia seminuda, a tree; Chloris truncata, a grass; and Hakea prostrata, a shrub) growing in a soil contaminated with total (aliphatic) petroleum hydrocarbon (TPH). Plant growth, photosynthesis (via chlorophyll fluorescence), soil microbial activity, alkane hydroxylase AlkB (aliphatic hydrocarbon-degrading) gene abundance, and TPH removal were evaluated 120 days after planting. Overall, although TPH served as an additional carbon source for soil microorganisms, the presence of TPH in soil resulted in decreased plant growth and photosynthesis. However, growth, photosynthesis, microbial activities, and AlkB gene abundance were enhanced by the application of P fertilizer, thereby increasing TPH removal rates, although the extent and optimum P dosage varied among the plant species. The highest TPH removal (64.66%) was observed in soil planted with the Poaceae species, C. truncata, and amended with 100 mg P kg^-1 soil, while H. prostrata showed higher TPH removal compared to the plant belonging to the same Proteaceae family, B. seminuda. The presence of plants resulted in higher AlkB gene abundance and TPH removal relative to the unplanted control. The removal of TPH was associated directly with AlkB gene abundance (R² > 0.9, p < 0.001), which was affected by plant identity and P levels. The results indicated that an integrated approach involving wild plant species and optimum P amendment, which was determined through experimentation using different plant species, was an efficient way to remediate soil contaminated with TPH.

Value of dehydrated food waste fertiliser products in increasing soil health and crop productivity

Dehydration of food waste is a technique in which food waste is dewatered to form a low moisture product. This research characterised the physicochemical properties of different dehydrated food waste products and examined their value in improving physical, biological, and chemical properties of soils. Dehydrated food waste products were slightly acidic (4.7-5.1) with high levels of electrical conductivity (EC) (4.83-7.64 mS cm^-1). The products were composed of complex carbohydrates, polysaccharides, alcohols, phenols, carboxylic acid, lipids, and fats and contained high levels of total and available nutrients. Dehydrated food wastes slightly impacted the soil pH; however, they significantly increased soil EC, which may cause soil salinity when applied repeatedly. The food waste products also increased macro-nutrients (N, P, and K) for plants across different soil types. Carbon and nutrients in dehydrated food waste increased microbial activity, measured by basal respiration. Delayed germination and reduced plant growth of corn (Zea mays) and wheat (Triticum aestivum) plants were observed at high application rates of dehydrated food waste. This may have resulted from a combination of phytotoxins, anoxic conditions, salinity as well as the water-repellent nature of dehydrated food waste. However, release of nutrients increased nutrient uptake and plant biomass in corn and wheat plants at low levels of food waste application. The dehydrated food waste products may require composting prior to soil application or incorporation into soil for a long duration prior to planting. These processes will overcome the limitations of phytotoxins, anoxic conditions, salinity, and water repellence. Further work is required to optimise the levels of dehydrated food waste application to improve soil health and crop productivity.

Treatment processes to eliminate potential environmental hazards and restore agronomic value of sewage sludge: A review

Land application of sewage sludge is increasingly used as an alternative to landfilling and incineration owing to a considerable content of carbon and essential plant nutrients in sewage sludge. However, the presence of chemical and biological contaminants in sewage sludge poses potential dangers; therefore, sewage sludge must be suitably treated before being applied to soils. The most common methods include anaerobic digestion, aerobic composting, lime stabilization, incineration, and pyrolysis. These methods aim at stabilizing sewage sludge, to eliminate its potential environmental pollution and restore its agronomic value. To achieve best results on land, a comprehensive understanding of the transformation of organic matter, nutrients, and contaminants during these sewage-sludge treatments is essential; however, this information is still lacking. This review aims to fill this knowledge gap by presenting various approaches to treat sewage sludge, transformation processes of some major nutrients and pollutants during treatment, and potential impacts on soils. Despite these treatments, overtime there are still some potential risks of land application of treated sewage sludge. Potentially toxic substances remain the main concern regarding the reuse of treated sewage sludge on land. Therefore, further treatment may be applied, and long-term field studies are warranted, to prevent possible adverse effects of treated sewage sludge on the ecosystem and human health and enable its land application.

Antimony contamination and its risk management in complex environmental settings: A review

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

From mine to mind and mobiles - Lithium contamination and its risk management

With the ever-increasing demand for lithium (Li) for portable energy storage devices, there is a global concern associated with environmental contamination of Li, via the production, use, and disposal of Li-containing products, including mobile phones and mood-stabilizing drugs. While geogenic Li is sparingly soluble, Li added to soil is one of the most mobile cations in soil, which can leach to groundwater and reach surface water through runoff. Lithium is readily taken up by plants and has relatively high plant accumulation coefficient, albeit the underlying mechanisms have not been well described. Therefore, soil contamination with Li could reach the food chain due to its mobility in surface- and ground-waters and uptake into plants. High environmental Li levels adversely affect the health of humans, animals, and plants. Lithium toxicity can be considerably managed through various remediation approaches such as immobilization using clay-like amendments and/or chelate-enhanced phytoremediation. This review integrates fundamental aspects of Li distribution and behaviour in terrestrial and aquatic environments in an effort to efficiently remediate Li-contaminated ecosystems. As research to date has not provided a clear picture of how the increased production and disposal of Li-based products adversely impact human and ecosystem health, there is an urgent need for further studies on this field.

Remediation of soils and sediments polluted with polycyclic aromatic hydrocarbons: To immobilize, mobilize, or degrade?

Polycyclic aromatic hydrocarbons (PAHs) are generated due to incomplete burning of organic substances. Use of fossil fuels is the primary anthropogenic cause of PAHs emission in natural settings. Although several PAH compounds exist in the natural environmental setting, only 16 of these compounds are considered priority pollutants. PAHs imposes several health impacts on humans and other living organisms due to their carcinogenic, mutagenic, or teratogenic properties. The specific characteristics of PAHs, such as their high hydrophobicity and low water solubility, influence their active adsorption onto soils and sediments, affecting their bioavailability and subsequent degradation. Therefore, this review first discusses various sources of PAHs, including source identification techniques, bioavailability, and interactions of PAHs with soils and sediments. Then this review addresses the remediation technologies adopted so far of PAHs in soils and sediments using immobilization techniques (capping, stabilization, dredging, and excavation), mobilization techniques (thermal desorption, washing, electrokinetics, and surfactant assisted), and biological degradation techniques. The pros and cons of each technology are discussed. A detailed systematic compilation of eco-friendly approaches used to degrade PAHs, such as phytoremediation, microbial remediation, and emerging hybrid or integrated technologies are reviewed along with case studies and provided prospects for future research.

Production, characterisation, utilisation, and beneficial soil application of steel slag: A review

Slags are a co-product produced by the steel manufacturing industry and have mainly been utilised for aggregates in concreting and road construction. The increased utilisation of slag can increase economic growth and sustainability for future generations by creating a closed-loop system, circular economy within the metallurgical industries. Slags can be used as a soil amendment, and slag characteristics may reduce leachate potential of heavy metals, reduce greenhouse gas emissions, as well as contain essential nutrients required for agricultural use and environmental remediation. This review aims to examine various slag generation processes in steel plants, their physicochemical characteristics in relation to beneficial utilisation as a soil amendment, and environmental implications and risk assessment of their utilisation in agricultural soils. In relation to enhancing recycling of these resources, current and emerging techniques to separate iron and phosphorus slag compositions are also outlined in this review. Although there are no known immediate direct threats posed by slag on human health, the associated risks include potential heavy metal contamination, leachate contamination, and bioaccumulation of heavy metals in plants, thereby reaching the food chain. Further research in this area is required to assess the long-term effects of slag in agricultural soils on animal and human health.

Distribution, behaviour, bioavailability and remediation of poly- and per-fluoroalkyl substances (PFAS) in solid biowastes and biowaste-treated soil

Aqueous film-forming foam, used in firefighting, and biowastes, including biosolids, animal and poultry manures, and composts, provide a major source of poly- and perfluoroalkyl substances (PFAS) input to soil. Large amounts of biowastes are added to soil as a source of nutrients and carbon. They also are added as soil amendments to improve soil health and crop productivity. Plant uptake of PFAS through soil application of biowastes is a pathway for animal and human exposure to PFAS. The complexity of PFAS mixtures, and their chemical and thermal stability, make remediation of PFAS in both solid and aqueous matrices challenging. Remediation of PFAS in biowastes, as well as soils treated with these biowastes, can be achieved through preventing and decreasing the concentration of PFAS in biowaste sources (i.e., prevention through source control), mobilization of PFAS in contaminated soil and subsequent removal through leaching (i.e., soil washing) and plant uptake (i.e., phytoremediation), sorption of PFAS, thereby decreasing their mobility and bioavailability (i.e., immobilization), and complete removal through thermal and chemical oxidation (i.e., destruction). In this review, the distribution, bioavailability, and remediation of PFAS in soil receiving solid biowastes, which include biosolids, composts, and manure, are presented.

Silver nanoparticles in aquatic sediments: Occurrence, chemical transformations, toxicity, and analytical methods

Sediments represent the major sink for released silver nanoparticles (AgNPs) in aquatic environments. It is well known that the environmental behavior and toxicity of AgNPs in sediments are governed by their specific chemical species instead of their total concentration. This review focuses on various chemical transformations of AgNPs in sediments, which have not been well outlined before. We first outline the concentrations of AgNPs in sediments. The predicted concentrations are 1-5 µg kg^-1 in most model studies. Once enter sediments, AgNPs are transformed to different species (e.g., Ag₂S, Ag-humic substance complexes, AgCl, and Ag⁺) during multiple chemical transformations, such as oxidative dissolution, sulfidation, chlorination, and complexation. Those chemical behaviors mitigate the toxicity of AgNPs by reducing their availability and decreasing Ag⁺ release. Benthic invertebrates and microbes are prone to be affected by AgNPs. AgNPs are found to be accumulated in sediment-dwelling organisms and transferred to higher trophic levels along the food web. Besides X-ray absorption spectroscopy, reliable separation procedures coupled with detection techniques, are powerful tools that characterize the speciation of AgNPs in sediments. More research is needed to investigate diverse chemical transformations in various sediments through development of novel techniques and mathematical models.

Mitigation of petroleum-hydrocarbon-contaminated hazardous soils using organic amendments: A review

The term "Total petroleum hydrocarbons" (TPH) is used to describe a complex mixture of petroleum-based hydrocarbons primarily derived from crude oil. Those compounds are considered as persistent organic pollutants in the terrestrial environment. A wide array of organic amendments is increasingly used for the remediation of TPH-contaminated soils. Organic amendments not only supply a source of carbon and nutrients but also add exogenous beneficial microorganisms to enhance the TPH degradation rate, thereby improving the soil health. Two fundamental approaches can be contemplated within the context of remediation of TPH-contaminated soils using organic amendments: (i) enhanced TPH sorption to the exogenous organic matter (immobilization) as it reduces the bioavailability of the contaminants, and (ii) increasing the solubility of the contaminants by supplying desorbing agents (mobilization) for enhancing the subsequent biodegradation. Net immobilization and mobilization of TPH have both been observed following the application of organic amendments to contaminated soils. This review examines the mechanisms for the enhanced remediation of TPH-contaminated soils by organic amendments and discusses the influencing factors in relation to sequestration, bioavailability, and subsequent biodegradation of TPH in soils. The uncertainty of mechanisms for various organic amendments in TPH remediation processes remains a critical area of future research.

Petroleum hydrocarbon rhizoremediation and soil microbial activity improvement via cluster root formation by wild proteaceae plant species

Rhizoremediation potential of different wild plant species for total (aliphatic) petroleum hydrocarbon (TPH)-contaminated soils was investigated. Three-week-old seedlings of Acacia inaequilatera, Acacia pyrifolia, Acacia stellaticeps, Banksia seminuda, Chloris truncata, Hakea prostrata, Hardenbergia violacea, and Triodia wiseana were transplanted in a soil contaminated with diesel and engine oil as TPH at pollution levels of 4,370 (TPH1) and 7,500 (TPH2) mg kg^-1, and an uncontaminated control (TPH0). After 150 days, the presence of TPH negatively affected the plant growth, but the growth inhibition effect varied between the plant species. Plant growth and associated root biomass influenced the activity of rhizo-microbiome. The presence of B. seminuda, C. truncata, and H. prostrata significantly increased the TPH removal rate (up to 30% compared to the unplanted treatment) due to the stimulation of rhizosphere microorganisms. No significant difference was observed between TPH1 and TPH2 regarding the plant tolerance and rhizoremediation potentials of the three plant species. The presence of TPH stimulated cluster root formation in B. seminuda and H. prostrata which was associated with enhanced TPH remediation of these two members of Proteaceae family. These results indicated that B. seminuda, C. truncata, and H. prostrata wild plant species could be suitable candidates for the rhizoremediation of TPH-contaminated soil.

Carbon sequestration value of biosolids applied to soil: A global meta-analysis

Biosolids produced at wastewater treatment facilities are extensively used in agricultural land and degraded mine sites to improve soil health and soil organic carbon (SOC) stocks. Many studies have reported increases in SOC due to application of biosolids to such sites. However, lack of a comprehensive quantification on overall trends and changes of magnitude in SOC remains. Here, we performed a meta-analysis to identify drivers with a relationship with SOC stocks. A meta-regression of 297 treatments found four variables with a relationship with SOC stocks: cumulative biosolids carbon (C) input rate, time after application, soil depth and type of biosolids. The cumulative biosolids C input rate was the most influencing driver. The highest mean difference for SOC% of 3.3 was observed at 0-15 cm soil depth for a cumulative C input of 100 Mg ha^-1 at one year after biosolids application. Although years after biosolids application demonstrated a negative relationship with SOC stocks, mineralization of C in biosolids-applied soils is slow, as indicated with the SOC% decrease from 4.6 to 2.8 at 0-15 cm soil depth over five years of 100 Mg ha^-1 biosolids C input. Soil depth illustrated a strong negative effect with SOC stocks decreasing by 2.7% at 0-15 cm soil depth at a cumulative biosolids C input of 100 Mg ha^-1 over a year. Overall, our model estimated an effect of 2.8 SOC% change, indicating the application of biosolids as a viable strategy for soil C sequestration on a global scale.

A review on the valorisation of food waste as a nutrient source and soil amendment

Valorisation of food waste offers an economical and environmental opportunity, which can reduce the problems of its conventional disposal. Food waste is commonly disposed of in landfills or incinerated, causing many environmental, social, and economic issues. Large amounts of food waste are produced in the food supply chain of agriculture: production, post-harvest, distribution (transport), processing, and consumption. Food waste can be valorised into a range of products, including biofertilisers, bioplastics, biofuels, chemicals, and nutraceuticals. Conversion of food waste into these products can reduce the demand of fossil-derived products, which have historically contributed to large amounts of pollution. The variety of food chain suppliers offers a wide range of feedstocks that can be physically, chemically, or biologically altered to form an array of biofertilisers and soil amendments. Composting and anaerobic digestion are the main large-scale conversion methods used today to valorise food waste products to biofertilisers and soil amendments. However, emerging conversion methods such as dehydration, biochar production, and chemical hydrolysis have promising characteristics, which can be utilised in agriculture as well as for soil remediation. Valorising food waste into biofertilisers and soil amendments has great potential to combat land degradation in agricultural areas. Biofertilisers are rich in nutrients that can reduce the dependability of using conventional mineral fertilisers. Food waste products, unlike mineral fertilisers, can also be used as soil amendments to improve productivity. These characteristics of food wastes assist in the remediation of contaminated soils. This paper reviews the volume of food waste within the food chain and types of food waste feedstocks that can be valorised into various products, including the conversion methods. Unintended consequences of the utilisation of food waste as biofertilisers and soil-amendment products resulting from their relatively low concentrations of trace element nutrients and presence of potentially toxic elements are also evaluated.

Rhizoremediation as a green technology for the remediation of petroleum hydrocarbon-contaminated soils

Rhizoremediation is increasingly becoming a green and sustainable alternative to physico-chemical methods for remediation of contaminated environments through the utilization of symbiotic relationship between plants and their associated soil microorganisms in the root zone. The overall efficiency can be enhanced by identifying suitable plant-microbe combinations for specific contaminants and supporting the process with the application of appropriate soil amendments. This approach not only involves promoting the existing activity of plants and soil microbes, but also introduces an adequate number of microorganisms with specific catabolic activity. Here, we reviewed recent literature on the main mechanisms and key factors in the rhizoremediation process with a particular focus on soils contaminated with total petroleum hydrocarbon (TPH). We then discuss the potential of different soil amendments to accelerate the remediation efficiency based on biostimulation and bioaugmentation processes. Notwithstanding some successes in well-controlled environments, rhizoremediation of TPH under field conditions is still not widespread and considered less attractive than physico-chemical methods. We catalogued the major pitfalls of this remediation approach at the field scale in TPH-contaminated sites and, provide some applicable situations for the future successful use of in situ rhizoremediation of TPH-contaminated soils.

Metal nanoparticles as effective promotors for Maize production

Zero-valent metal nanoparticles (Cu, Fe and Co) were prepared by the reactive method from their oxide with hydrogen. The energy-rich solutions of metal nanoparticles were used for treatment Maize seeds prior to sowing. The treatment significantly improved the germination rate and early growth. Furthermore, both SOD and APX enzyme activity in leaves were improved, and enhanced the metabolism of superoxide, leading to increased drought resistance. The method was applied to the field over three seasons and greatly improved the harvest. In particular, the implementation of Cu particles at 4 mg/kg increased the productivity of the two Maize species more than 20%.