In-plane anisotropic two-dimensional materials for twistronics

In-plane anisotropic two-dimensional (2D) materials exhibit in-plane orientation-dependent properties. The anisotropic unit cell causes these materials to show lower symmetry but more diverse physical properties than in-plane isotropic 2D materials. In addition, the artificial stacking of in-plane anisotropic 2D materials can generate new phenomena that cannot be achieved in in-plane isotropic 2D materials. In this perspective we provide an overview of representative in-plane anisotropic 2D materials and their properties, such as black phosphorus, group IV monochalcogenides, group VI transition metal dichalcogenides with 1T' and Tdphases, and rhenium dichalcogenides. In addition, we discuss recent theoretical and experimental investigations of twistronics using in-plane anisotropic 2D materials. Both in-plane anisotropic 2D materials and their twistronics hold considerable potential for advancing the field of 2D materials, particularly in the context of orientation-dependent optoelectronic devices.

Reversible Transition of Semiconducting PtSe2 and Metallic PtTe2 for Scalable All-2D Edge-Contacted FETs

Two-dimensional (2D) transition metal dichalcogenide (TMD) layers are highly promising as field-effect transistor (FET) channels in the atomic-scale limit. However, accomplishing this superiority in scaled-up FETs remains challenging due to their van der Waals (vdW) bonding nature with respect to conventional metal electrodes. Herein, we report a scalable approach to fabricate centimeter-scale all-2D FET arrays of platinum diselenide (PtSe2) with in-plane platinum ditelluride (PtTe2) edge contacts, mitigating the aforementioned challenges. We realized a reversible transition between semiconducting PtSe2 and metallic PtTe2 via a low-temperature anion exchange reaction compatible with the back-end-of-line (BEOL) processes. All-2D PtSe2 FETs seamlessly edge-contacted with transited metallic PtTe2 exhibited significant performance improvements compared to those with surface-contacted gold electrodes, e.g., an increase of carrier mobility and on/off ratio by over an order of magnitude, achieving a maximum hole mobility of ∼50.30 cm2 V-1 s-1 at room temperature. This study opens up new opportunities toward atomically thin 2D-TMD-based circuitries with extraordinary functionalities.

Low-Temperature Centimeter-Scale Growth of Layered 2D SnS for Piezoelectric Kirigami Devices

Tin monosulfide (SnS) is a promising piezoelectric material with an intrinsically layered structure, making it attractive for self-powered wearable and stretchable devices. However, for practical application purposes, it is essential to improve the output and manufacturing compatibility of SnS-based piezoelectric devices by exploring their large-area synthesis principle. In this study, we report the chemical vapor deposition (CVD) growth of centimeter-scale two-dimensional (2D) SnS layers at temperatures as low as 200 °C, allowing compatibility with processing a range of polymeric substrates. The intrinsic piezoelectricity of 2D SnS layers directly grown on polyamides (PIs) was confirmed by piezoelectric force microscopy (PFM) phase maps and force-current corroborative measurements. Furthermore, the structural robustness of the centimeter-scale 2D SnS layers/PIs allowed for engraving complicated kirigami patterns on them. The kirigami-patterned 2D SnS layer devices exhibited intriguing strain-tolerant piezoelectricity, which was employed in detecting human body motions and generating photocurrents irrespective of strain rate variations. These results establish the great promise of 2D SnS layers for practically relevant large-scale device technologies with coupled electrical and mechanical properties.

Multivariable model of postoperative delirium in cardiac surgery patients: proteomic and demographic contributions

Background

Delirium following cardiac surgery is common, morbid, and costly, but may be prevented with risk stratification and targeted intervention. Preoperative protein signatures may identify patients at increased risk for worse postoperative outcomes, including delirium. In this study, we aimed to identify plasma protein biomarkers and develop a predictive model for postoperative delirium in older patients undergoing cardiac surgery, while also uncovering possible pathophysiological mechanisms.

Methods

SOMAscan analysis of 1,305 proteins in the plasma from 57 older adults undergoing cardiac surgery requiring cardiopulmonary bypass was conducted to define delirium-specific protein signatures at baseline (PREOP) and postoperative day 2 (POD2). Selected proteins were validated in 115 patients using the ELLA multiplex immunoassay platform. Proteins were combined with clinical and demographic variables to build multivariable models that estimate the risk of postoperative delirium and bring light to the underlying pathophysiology.

Results

A total of 115 and 85 proteins from SOMAscan analyses were found altered in delirious patients at PREOP and POD2, respectively (p<0.05). Using four criteria including associations with surgery, delirium, and biological plausibility, 12 biomarker candidates (Tukey's fold change (|tFC|)>1.4, Benjamini-Hochberg (BH)-p<0.01) were selected for ELLA multiplex validation. Eight proteins were significantly altered at PREOP, and seven proteins at POD2 (p<0.05), in patients who developed postoperative delirium compared to non-delirious patients. Statistical analyses of model fit resulted in the selection of a combination of age, sex, and three proteins (angiopoietin-2 (ANGPT2); C-C motif chemokine 5 (CCL5); and metalloproteinase inhibitor 1 (TIMP1); AUC=0.829) as the best performing predictive model for delirium at PREOP. The delirium-associated proteins identified as biomarker candidates are involved with inflammation, glial dysfunction, vascularization, and hemostasis, highlighting the multifactorial pathophysiology of delirium.

Conclusion

Our study proposes a model of postoperative delirium that includes a combination of older age, female sex, and altered levels of three proteins. Our results support the identification of patients at higher risk of developing postoperative delirium after cardiac surgery and provide insights on the underlying pathophysiology. ClinicalTrials.gov ( NCT02546765 ).

Development of reference material for quality control of uranium analysis in marine sediments

Environmental radioactivity monitoring is strengthening due to public concerns over radioactive contamination since the Fukushima nuclear power plant accident. Therefore, various research laboratories, institutes, and universities have been conducting environmental radioactivity surveys around nuclear power plants (NPPs). However, the reliability of the results continues to trigger controversy in society. This study was conducted to develop reference material (RM) for the quality control of 238U and 234U analyses in marine sediments. The RM was prepared according to ISO Guides 31, 34, and 35. A homogeneity test of the marine sediment RM was implemented by analyzing two batch samples from ten bottles using multiple acid digestion and alkali fusion, respectively. We found that the 238U and 234U reference values of the RM were 43.0 ± 1.7 Bq kg-1(k=1) and 41.5 ± 1.9 Bq kg-1(k=1), respectively. This marine sediment RM will be useful for the quality control of analytical methods for similar samples and proficiency tests.

Development of metal radioactive liquid reference material for proficiency test

This study developed liquid reference materials containing various metals, to be used for quality assurance of radiation measurements of the most common metallic wastes generated during the operation or decommissioning of nuclear power plants. The liquid reference materials were prepared by assuming the dissolution of stainless-steel using acid and melting of the major metals present in the stainless steel, namely Fe, Ni, Cr, and Mn, along with the standard sources (134Cs, 137Cs, 60Co, 90Sr). The theoretical massic activity of the standard sources added to the samples and the measured reference values of the gamma and beta emitters in the samples were compared, and they showed good agreement within a one-sigma confidence interval (k = 1). Using the developed reference materials, a proficiency test was conducted on three domestic labs, and the results were evaluated using Z-score. While the evaluation results showed good agreement between the reference values and the reported values for 137Cs and 60Co, all participating labs reported lower values than the reference value for 134Cs. For 90Sr, two out of the three labs reported significantly higher values than the reference value. Based on the results of this study, the developed metal radioactive liquid reference material is expected to be registered as certified reference material (CRM) in the future. They will be used as the CRM for measuring and ensuring the quality of radioactive metal waste.

Development of concrete reference material for quality assurance/quality control of gamma radioactivity measurement for nuclear power plant decommissioning waste

The Korea Research Institute of Standards and Science has developed a new concrete reference material (RM) for measuring gamma-emitting radionuclides, such as 134Cs, 137Cs, 65Zn, 241Am, and 60Co, to improve and maintain the quality assurance and quality control of the radioactivity measurement in radioactive waste generated during the decommissioning of nuclear power plants. In this study, cement, SiO2, and bentonite, which are the main components of concrete, were mixed in an appropriate ratio with radionuclides. For certification and homogeneity assessment, 10 bottles were randomly selected, two sub-samples were collected from each bottle, and radionuclides were measured via HPGe gamma spectrometry. The results of the homogeneity tests using a one-way analysis of variance on 241Am, 134Cs, 137Cs, 65Zn, and 60Co in the concrete RM fulfilled the requirements of ISO Guide 35. Coincidence summing and self-absorption correction were performed on measurement results by introducing the Monte Carlo efficiency transfer code and Monte Carlo N-Particle transport code. The reference values for five radionuclides (60Co, 65Zn, 241Am, 134Cs, and 137Cs) in the RM were in the range of 15-40 Bq/kg, and the expanded uncertainty was within 10% (k = 2). To the best of our knowledge, this was the first study to develop concrete RM for measuring gamma-emitting radionuclides.

Temperature dependent studies on centimeter-scale MoS2and vdW heterostructures

Transition metal dichalcogenides is an emerging 2D semiconducting material group which has excellent physical properties in the ultimately scaled thickness dimension. Specifically, van der Waals heterostructures hold the great promise in further advancing both the fundamental scientific knowledge and practical technological applications of 2D materials. Although 2D materials have been extensively studied for various sensing applications, temperature sensing still remains relatively unexplored. In this work, we experimentally study the temperature-dependent Raman spectroscopy and electrical conductivity of molybdenum disulfide (MoS₂) and its heterostructures with platinum dichalcogenides (PtSe₂and PtTe₂) to explore their potential to become the next-generation temperature sensor. It is found that the MoS₂-PtX₂heterostructure shows the great promise as the high-sensitivity temperature sensor.

Large-area vertically aligned 2D MoS2layers on TEMPO-cellulose nanofibers for biodegradable transient gas sensors

Crystallographically anisotropic two-dimensional (2D) molybdenum disulfide (MoS₂) with vertically aligned (VA) layers is attractive for electrochemical sensing owing to its surface-enriched dangling bonds coupled with extremely large mechanical deformability. In this study, we explored VA-2D MoS₂layers integrated on cellulose nanofibers (CNFs) for detecting various volatile organic compound gases. Sensor devices employing VA-2D MoS₂/CNFs exhibited excellent sensitivities for the tested gases of ethanol, methanol, ammonia, and acetone; e.g. a high response rate up to 83.39% for 100 ppm ethanol, significantly outperforming previously reported sensors employing horizontally aligned 2D MoS₂layers. Furthermore, VA-2D MoS₂/CNFs were identified to be completely dissolvable in buffer solutions such as phosphate-buffered saline solution and baking soda buffer solution without releasing toxic chemicals. This unusual combination of high sensitivity and excellent biodegradability inherent to VA-2D MoS₂/CNFs offers unprecedented opportunities for exploring mechanically reconfigurable sensor technologies with bio-compatible transient characteristics.

Multiwavelength Optoelectronic Synapse with 2D Materials for Mixed-Color Pattern Recognition

Neuromorphic visual systems emulating biological retina functionalities have enormous potential for in-sensor computing, with prospects of making artificial intelligence ubiquitous. Conventionally, visual information is captured by an image sensor, stored by memory units, and eventually processed by the machine learning algorithm. Here, we present an optoelectronic synapse device with multifunctional integration of all the processes required for real time object identification. Ultraviolet-visible wavelength-sensitive MoS₂ FET channel with infrared sensitive PtTe₂/Si gate electrode enables the device to sense, store, and process optical data for a wide range of the electromagnetic spectrum, while maintaining a low dark current. The device exhibits optical stimulation-controlled short-term and long-term potentiation, electrically driven long-term depression, synaptic weight update for multiple wavelengths of light ranging from 300 nm in ultraviolet to 2 μm in infrared. An artificial neural network developed using the extracted weight update parameters of the device can be trained to identify both single wavelength and mixed wavelength patterns. This work demonstrates a device that could potentially be used for realizing a multiwavelength neuromorphic visual system for pattern recognition and object identification.

POS1060 CHANGES IN DISEASE ACTIVITY AND PATIENT-REPORTED OUTCOMES IN PSORIATIC ARTHRITIS PATIENTS TREATED WITH IXEKIZUMAB IN A REAL-WORLD US COHORT

Background

Ixekizumab (IXE), an IL-17A inhibitor, has demonstrated efficacy in clinical trials1-3 but real-world effectiveness (RWE) data are limited.4

Objectives

To describe changes in disease activity and patient-reported outcomes (PROs) at 6 and 12 months follow-up among psoriatic arthritis (PsA) patients initiating IXE in a routine clinical setting.

Methods

This retrospective cohort study included patients from the OM1 PsA Registry (OM1, Boston, MA), a linked electronic medical record and administrative claims dataset with over 50,000 patients. Eligible patients had ≥1 prescription for IXE (first = index), were ≥18 years old at index, had ≥1 diagnosis code for PsA in the 12 months before or on index, and had ≥12 months of baseline and ≥6 months of follow-up data as of June 2021. For patients with baseline and follow-up measures available, changes in Clinical Disease Activity Index (CDAI), PROs, and other clinical outcomes from baseline to 6 and 12 months were described. For patients on IXE monotherapy, change in CDAI score from baseline to 6 and 12 months was assessed using mixed effects linear models adjusted for age, sex, and baseline CDAI score.

Results

The study population included 1,812 patients with a mean age of 53.7 years (Table 1). Psoriasis was present in 82% and enthesitis in 28%. Over 60% of patients were obese, and the mean Charlson Comorbidity Index was 1.3. Most patients (84%) had prior treatment with a biologic disease-modifying antirheumatic drug (bDMARD) and 40% with a targeted synthetic DMARD (tsDMARD). The mean number of bDMARDs and tsDMARDs used during all available prior history was 2.3 and 1.1, respectively. The most common prior bDMARDs were secukinumab (n=428, 24%) and adalimumab (n=245, 14%).

Table 1.

Demographic and Clinical Characteristics by Therapy Status

All Patients(N=1,812)Monotherapy(N=1,485)Combination Therapy(N=327)Age (years)Mean (s.d.)53.7 (12.2)53.9 (12.3)52.9 (11.7)Median (Q1-Q3)55 (46-62)55 (46-62)54 (45-61)SexFemale1,108 (61.1%)909 (61.2%)199 (60.9%)Male704 (38.9%)576 (38.8%)128 (39.1%)Charlson Comorbidity IndexMean (s.d.)1.3 (1.6)1.3 (1.6)1.5 (1.7)Median (Q1-Q3)1 (0-2)1 (0-2)1 (0-2)BMIUnderweight: <18.510 (0.6%)10 (0.7%)0 (0.0%)Normal weight: 18.5-24.9210 (12.2%)172 (12.2%)38 (12.1%)Overweight: 25-29.9455 (26.5%)379 (27.0%)76 (24.2%)Obese: >= 301,045 (60.8%)845 (60.1%)200 (63.7%)Missing927913Domains of PsA: PsoriasisYes1,490 (82.2%)1,222 (82.3%)268 (82.0%)No322 (17.8%)263 (17.7%)59 (18.0%)Domains of PsA: EnthesitisYes510 (28.1%)409 (27.5%)101 (30.9%)No1,302 (71.9%)1,076 (72.5%)226 (69.1%)

Of patients with a baseline CDAI score, 61% had moderate or severe disease activity. For all patients, CDAI scores improved (decreased) by an average of 3.4 and 3.7 points at 6 and 12 months, respectively, from a baseline mean of 15.4. All disease activity measures and PROs improved from baseline to 6 and 12 months (Figure 1). In patients persistent with IXE, 35.3% and 33.7% were in CDAI remission or low disease activity at 6 and 12 months after initiation, respectively. For IXE monotherapy users (82% of patients), at baseline, patients had a mean CDAI of 14.3 (n=131) and 15.1 (n=105) for the 6 and 12 month analyses, respectively. Adjusted mean changes in CDAI from baseline to 6 months (-3.6 points, p < 0.0001) and 12 months (-4.9 points, p < 0.0001) were statistically significant.

Conclusion

In this cohort of PsA patients with multiple prior b/tsDMARD failures, improvements in disease activity and PROs were observed at 6 and 12 months after initiating treatment with IXE. Improvements were observed in patients overall and in the monotherapy subgroup. More real-world research on IXE and other bDMARDs are important to understand the effect of treatment choices on clinical and PROs in both bDMARD-naive and experienced PsA patients.

References

[1]Mease PJ. Ann. Rheum. Dis. 2017;76(1):79-87

[2]Nash P. Lancet. 2017;389(10086):2317-2327

[3]Mease PJ. Ann. Rheum. Dis. 2020;79(1):123-131

[4]Berman J. Biologics. 2021 Nov 18;15:463-470

Disclosure of Interests

Julie Birt Shareholder of: Shareholder of Eli Lilly and Company, Employee of: Employee of Eli Lilly and Company, William Tillett Speakers bureau: Abbvie, Amgen, Celgene, Eli-Lilly, Janssen, MSD, Novartis,, Pfizer, UCB, Consultant of: Abbvie, Amgen, Celgene, Eli-Lilly, Janssen, MSD, Novartis, Pfizer, UCB, Grant/research support from: Abbvie, Amgen, Celgene, Eli-Lilly, Janssen, UCB, Cristi Cavanaugh: None declared, Yoojin Jung: None declared, Aisha Vadhariya Shareholder of: Shareholder of Eli Lilly and Company, Employee of: Employee of Eli Lilly and Company, Sarah Ross Shareholder of: Shareholder of Eli Lilly and Company, Employee of: Employee of Eli Lilly and Company, Jess Paulus: None declared, Aubrey Trevelin Sprabery Shareholder of: Shareholder of Eli Lilly and Company, Employee of: Employee of Eli Lilly and Company, Ennio Lubrano: None declared

Peel-and-Stick Integration of Atomically Thin Nonlayered PtS Semiconductors for Multidimensionally Stretchable Electronic Devices

Various near-atom-thickness two-dimensional (2D) van der Waals (vdW) crystals with unparalleled electromechanical properties have been explored for transformative devices. Currently, the availability of 2D vdW crystals is rather limited in nature as they are only obtained from certain mother crystals with intrinsically possessed layered crystallinity and anisotropic molecular bonding. Recent efforts to transform conventionally non-vdW three-dimensional (3D) crystals into ultrathin 2D-like structures have seen rapid developments to explore device building blocks of unique form factors. Herein, we explore a "peel-and-stick" approach, where a nonlayered 3D platinum sulfide (PtS) crystal, traditionally known as a cooperate mineral material, is transformed into a freestanding 2D-like membrane for electromechanical applications. The ultrathin (∼10 nm) 3D PtS films grown on large-area (>cm²) silicon dioxide/silicon (SiO₂/Si) wafers are precisely "peeled" inside water retaining desired geometries via a capillary-force-driven surface wettability control. Subsequently, they are "sticked" on strain-engineered patterned substrates presenting prominent semiconducting properties, i.e., p-type transport with an optical band gap of ∼1.24 eV. A variety of mechanically deformable strain-invariant electronic devices have been demonstrated by this peel-and-stick method, including biaxially stretchable photodetectors and respiratory sensing face masks. This study offers new opportunities of 2D-like nonlayered semiconducting crystals for emerging mechanically reconfigurable and stretchable device technologies.

MoS2 Synapses with Ultra-low Variability and Their Implementation in Boolean Logic

Brain-inspired computing enabled by memristors has gained prominence over the years due to the nanoscale footprint and reduced complexity for implementing synapses and neurons. The demonstration of complex neuromorphic circuits using conventional materials systems has been limited by high cycle-to-cycle and device-to-device variability. Two-dimensional (2D) materials have been used to realize transparent, flexible, ultra-thin memristive synapses for neuromorphic computing, but with limited knowledge on the statistical variation of devices. In this work, we demonstrate ultra-low-variability synapses using chemical vapor deposited 2D MoS₂ as the switching medium with Ti/Au electrodes. These devices, fabricated using a transfer-free process, exhibit ultra-low variability in SET voltage, RESET power distribution, and synaptic weight update characteristics. This ultra-low variability is enabled by the interface rendered by a Ti/Au top contact on Si-rich MoS₂ layers of mixed orientation, corroborated by transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS). TEM images further confirm the stability of the device stack even after subjecting the device to 100 SET-RESET cycles. Additionally, we implement logic gates by monolithic integration of MoS₂ synapses with MoS₂ leaky integrate-and-fire neurons to show the viability of these devices for non-von Neumann computing.

High spatial-density, cladding-pumped 6-mode 7-core fiber amplifier for C-band operation

We present a C-band 6-mode 7-core fiber amplifier in an all-fiberized cladding-pumped configuration for space division multiplexed transmission supporting a record 42 spatial channels. With optimized fiber components (e.g. passively cooled pump laser diode, pump coupler, pump stripper), high power multimode pump light is coupled to the active fiber without any noticeable thermal degradation and an average gain of 18 dB and noise figure of 5.4 dB are obtained with an average differential modal gain of 3.4 dB.

Mechanically rollable photodetectors enabled by centimetre-scale 2D MoS2 layer/TOCN composites

Two-dimensional (2D) molybdenum disulfide (MoS2) layers are suitable for visible-to-near infrared photodetection owing to their tunable optical bandgaps. Also, their superior mechanical deformability enabled by an extremely small thickness and van der Waals (vdW) assembly allows them to be structured into unconventional physical forms, unattainable with any other materials. Herein, we demonstrate a new type of 2D MoS2 layer-based rollable photodetector that can be mechanically reconfigured while maintaining excellent geometry-invariant photo-responsiveness. Large-area (>a few cm2) 2D MoS2 layers grown by chemical vapor deposition (CVD) were integrated on transparent and flexible substrates composed of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNs) by a direct solution casting method. These composite materials in three-dimensionally rollable forms exhibited a large set of intriguing photo-responsiveness, well preserving intrinsic opto-electrical characteristics of the integrated 2D MoS2 layers; i.e., light intensity-dependent photocurrents insensitive to illumination angles as well as highly tunable photocurrents varying with the rolling number of 2D MoS2 layers, which were impossible to achieve with conventional photodetectors. This study provides a new design principle for converting 2D materials to three-dimensional (3D) objects of tailored functionalities and structures, significantly broadening their potential and versatility in futuristic devices.

Scalable Van der Waals Two-Dimensional PtTe2 Layers Integrated onto Silicon for Efficient Near-to-Mid Infrared Photodetection

In recent years, there has been increasing interest in leveraging two-dimensional (2D) van der Waals (vdW) crystals for infrared (IR) photodetection, exploiting their unusual optoelectrical properties. Some 2D vdW materials with small band gap energies such as graphene and black phosphorus have been explored as stand-alone IR responsive layers in photodetectors. However, the devices incorporating these IR-sensitive 2D layers often exhibited poor performances owing to their preparation issues such as limited scalability and air instability. Herein, we explored wafer-scale 2D platinum ditelluride (PtTe₂) layers for near-to-mid IR photodetection by directly growing them onto silicon (Si) wafers. 2D PtTe₂/Si heterojunctions exhibited wavelength- and intensity-dependent high photocurrents in a spectral range of ∼1-7 μm, significantly outperforming stand-alone 2D PtTe₂ layers. The observed superiority is attributed to their excellent Schottky junction characteristics accompanying suppressed carrier recombination as well as optical absorbance competition between 2D PtTe₂ layers and Si. The direct and scalable growth of 2D PtTe₂ layers was further extended to demonstrate mechanically flexible IR photodetectors.

Risk factors for the delayed diagnosis of extrapulmonary TB

BACKGROUND: Extrapulmonary TB (EPTB) is more difficult to diagnose than pulmonary TB. The delayed management of EPTB can lead to complications and increase the socio-economic burden.METHODS: Patients newly diagnosed with EPTB were retrospectively enrolled from 11 general hospitals in South Korea from January 2017 to December 2018. The basic characteristics of patients were described. Univariable and multivariable analyses were performed between early and delayed diagnosis groups to identify risk factors for delayed diagnosis and treatment in EPTB.RESULTS: In total, 594 patients were enrolled. Lymph node TB (28.3%) was the predominant form, followed by abdominal (18.4%) and disseminated TB (14.5%). Concurrent lung involvement was 17.8%. The positivity of diagnostic tests showed no significant difference between the two groups. Acute clinical manifestations in disseminated, pericardial and meningeal TB, and immunosuppression were associated with early diagnosis. Delayed diagnosis was associated with outpatient clinic visits, delayed sample acquisition and diagnostic departments other than infection or pulmonology.CONCLUSION: The delay in diagnosis and treatment of EPTB was not related to differences in microbiological characteristics of Mycobacterium tuberculosis itself; rather, it was due to the indolent clinical manifestations that cause referral to non-TB-specialised departments in the outpatient clinic and delay the suspicion of TB and diagnostic testing.

Multipurpose and Reusable Ultrathin Electronic Tattoos Based on PtSe2 and PtTe2

Wearable bioelectronics with emphasis on the research and development of advanced person-oriented biomedical devices have attracted immense interest in the past decade. Scientists and clinicians find it essential to utilize skin-worn smart tattoos for on-demand and ambulatory monitoring of an individual's vital signs. Here, we report on the development of ultrathin platinum-based two-dimensional dichalcogenide (Pt-TMDs)-based electronic tattoos as advanced building blocks of future wearable bioelectronics. We made these ultrathin electronic tattoos out of large-scale synthesized platinum diselenide (PtSe₂) and platinum ditelluride (PtTe₂) layered materials and used them for monitoring human physiological vital signs, such as the electrical activity of the heart and the brain, muscle contractions, eye movements, and temperature. We show that both materials can be used for these applications; yet, PtTe₂ was found to be the most suitable choice due to its metallic structure. In terms of sheet resistance, skin contact, and electrochemical impedance, PtTe₂ outperforms state-of-the-art gold and graphene electronic tattoos and performs on par with medical-grade Ag/AgCl gel electrodes. The PtTe₂ tattoos show 4 times lower impedance and almost 100 times lower sheet resistance compared to monolayer graphene tattoos. One of the possible prompt implications of this work is perhaps in the development of advanced human-machine interfaces. To display the application, we built a multi-tattoo system that can easily distinguish eye movement and identify the direction of an individual's sight.

A Library of Atomically Thin 2D Materials Featuring the Conductive-Point Resistive Switching Phenomenon

Non-volatile resistive switching (NVRS) is a widely available effect in transitional metal oxides, colloquially known as memristors, and of broad interest for memory technology and neuromorphic computing. Until recently, NVRS was not known in other transitional metal dichalcogenides (TMDs), an important material class owing to their atomic thinness enabling the ultimate dimensional scaling. Here, various monolayer or few-layer 2D materials are presented in the conventional vertical structure that exhibit NVRS, including TMDs (MX₂ , M = transitional metal, e.g., Mo, W, Re, Sn, or Pt; X = chalcogen, e.g., S, Se, or Te), TMD heterostructure (WS₂ /MoS₂ ), and an atomically thin insulator (h-BN). These results indicate the universality of the phenomenon in 2D non-conductive materials, and feature low switching voltage, large ON/OFF ratio, and forming-free characteristic. A dissociation-diffusion-adsorption model is proposed, attributing the enhanced conductance to metal atoms/ions adsorption into intrinsic vacancies, a conductive-point mechanism supported by first-principle calculations and scanning tunneling microscopy characterizations. The results motivate further research in the understanding and applications of defects in 2D materials.

MULTIPHYSICS MODELING OF PRECURSORS IN MOLTEN SALT FAST REACTORS USING PROTEUS AND Nek5000

The goal of this work was to calculate the impact of the delayed neutron precursor drift in fast spectrum Molten Salt Reactors (MSRs) using coupled solutions from the neutronics code PROTEUS and the computational fluid dynamics code Nek5000. Specifically, using a multiphysics approach to solve the effective delayed neutron fraction (βeff) or delayed neutron precursor distribution for reactors with flowing fuel salts would provide valuable information for transient simulations and safety assessments. Given the multiple options for the flux solution and geometric resolution/fidelity in PROTEUS, two approaches were developed and applied to various test cases: PROTEUS-NODAL/Nek5000 and PROTEUS-SN/Nek5000. For the former, the precursors are tracked in the built-in precursor drift model in PROTEUS-NODAL, whereas in the latter, Nek5000 directly tracks the precursors. Both approaches were used to solve a single test channel problem and showed excellent agreement in the calculated βeff. Separately, a 3D hourglass-shaped core was modeled using the PROTEUS-SN/Nek5000 approach. This problem was designed to demonstrate the capability of the discrete ordinates (SN) solver and Nek5000 to model complex core designs with axially varying geometries and the ability for Nek5000 to track the precursors and calculate the resulting βeff. In addition, the Nek5000 calculations revealed the presence of recirculation zones in the hourglass design, which could lead to significant temperatures in the fuel salt and surrounding materials. These first coupled solutions show why these approaches may be necessary for not only predicting the precursor drift effect in fast MSRs but also for reactor design and performance assessments.

Advances in Mechanical Thrombectomy for Acute Ischemic Stroke Due to Large Vessel Occlusion

Acute ischemic stroke (AIS) is a significant cause of global morbidity and mortality, with functional implications for quality of life and long-term disability. The limitations of intravenous thrombolytic therapy for the treatment of AIS, especially for emergent large vessel occlusion (ELVO), have paved the way for alternative therapies and the rapidly evolving landscape of endovascular therapy (EVT). Here, we summarize the major landmark trials that have advanced the field largely due to ongoing biomedical engineering device development that have translated into significantly improved clinical outcomes. Our review describes the clinical success of EVT, and current and future trends.

Oxytocin receptor expression in stallion testes and epididymides

Endocrine, paracrine, and autocrine factors orchestrate the development and physiology of the stallion reproductive system. Oxytocin (OXT) is one of the critical endocrine, paracrine, and autocrine factors for the male reproductive system. Previous studies have investigated OXT receptor (OXTR) expression in testes and epididymides, including humans, marmosets, macaques, swine, and sheep. This study aimed to explore (1) OXTR localization in the testes and epididymides and (2) the seasonal modification of OXTR expression in the testes. Adult stallion testis and epididymis samples were prepared using routine castration procedures. Reverse-transcription PCR was performed to detect the presence of OXTR messenger RNA (mRNA) in the testes. Western blot procedure was performed to confirm the cross-reactivity of OXTR antibody to horse OXTR. Immunohistochemistry was performed to detect OXTR protein expression in the testes and epididymides. Oxytocin receptor mRNA was detected in the stallion testes. The OXTR protein band was observed at 55 kDa. Interestingly, the relative intensity of the OXTR protein band varied between nonbreeding and breeding season. The OXTR protein level in the testes collected during the breeding season was higher than that during the nonbreeding season. Oxytocin receptor localization was observed in the cytoplasm of Type A spermatogonia and spermatid. Oxytocin receptor protein expression was also observed in the cytoplasmic area of Leydig cells and the membrane of the seminiferous tubules. The cytoplasm of principal and basal cells in the caput, corpus, and cauda was also immunolabeled with OXTR antibody. In conclusion, based on the expression of OXTR in tissues of testes and epididymides, OXT-OXTR system may be a critical factor for stallion testicular and epididymal function. In addition, according to the seasonal alteration of intensity, the OXT-OXTR system may be associated with seasonal changes in the reproductive system in stallions.

Large-area 2D PtTe2/silicon vertical-junction devices with ultrafast and high-sensitivity photodetection and photovoltaic enhancement by integrating water droplets

2D PtTe2 layers, a relatively new class of 2D crystals, have unique band structure and remarkably high electrical conductivity promising for emergent opto-electronics. This intrinsic superiority can be further leveraged toward practical device applications by merging them with mature 3D semiconductors, which has remained largely unexplored. Herein, we explored 2D/3D heterojunction devices by directly growing large-area (>cm2) 2D PtTe2 layers on Si wafers using a low-temperature CVD method and unveiled their superior opto-electrical characteristics. The devices exhibited excellent Schottky transport characteristics essential for high-performance photovoltaics and photodetection, i.e., well-balanced combination of high photodetectivity (>1013 Jones), small photo-responsiveness time (∼1 μs), high current rectification ratio (>105), and water super-hydrophobicity driven photovoltaic improvement (>300%). These performances were identified to be superior to those of previously explored 2D/3D or 2D layer-based devices with much smaller junction areas, and their underlying principles were confirmed by DFT calculations.

Vertically Aligned 2D MoS2 Layers with Strain-Engineered Serpentine Patterns for High-Performance Stretchable Gas Sensors: Experimental and Theoretical Demonstration

Two-dimensional (2D) molybdenum disulfide (MoS₂) with vertically aligned (VA) layers exhibits significantly enriched surface-exposed edge sites with an abundance of dangling bonds owing to its intrinsic crystallographic anisotropy. Such structural variation renders the material with exceptionally high chemical reactivity and chemisorption ability, making it particularly attractive for high-performance electrochemical sensing. This superior property can be further promoted as far as it is integrated on mechanically stretchable substrates well retaining its surface-exposed defective edges, projecting opportunities for a wide range of applications utilizing its structural uniqueness and mechanical flexibility. In this work, we explored VA-2D MoS₂ layers configured in laterally stretchable forms for multifunctional nitrogen dioxide (NO₂) gas sensors. Large-area (>cm²) VA-2D MoS₂ layers grown by a chemical vapor deposition (CVD) method were directly integrated onto a variety of flexible substrates with serpentine patterns judiciously designed to accommodate a large degree of tensile strain. These uniquely structured VA-2D MoS₂ layers were demonstrated to be highly sensitive to NO₂ gas of controlled concentration preserving their intrinsic structural and chemical integrity, e.g., significant current response ratios of ∼160-380% upon the introduction of NO₂ at a level of 5-30 ppm. Remarkably, they exhibited such a high sensitivity even under lateral stretching up to 40% strain, significantly outperforming previously reported 2D MoS₂ layer-based NO₂ gas sensors of any structural forms. Underlying principles for the experimentally observed superiority were theoretically unveiled by density functional theory (DFT) calculation and finite element method (FEM) analysis. The intrinsic high sensitivity and large stretchability of VA-2D MoS₂ layers confirmed in this study are believed to be applicable in sensing diverse gas species, greatly broadening their versatility in stretchable and wearable technologies.

High-performance flexible asymmetric supercapacitor based on rGO anode and WO3/WS2 core/shell nanowire cathode

Flexible smart electronics require their energy storage device to be flexible in nature. Developing high-performance flexible energy storage devices require direct integration of electrode active materials on current collectors to satisfy the high electronic/ionic conductivity and long-term durability requirements. Herein, we develop a flexible all-solid-state asymmetric supercapacitor comprised of reduced graphene oxide (rGO) and core/shell tungsten trioxide/tungsten disulfide (WO₃/WS₂) nanowire based electrodes. The electrodes synthesized via electrochemical deposition and chemical vapor deposition avoided the necessity to use non-conductive binders and offered excellent cyclic stability. The structural integrity provided by the rGO and WO₃/WS₂ electrodes facilitated excellent electrochemical stability with capacitance retention of 90% and 100% after 10 000 charge-discharge cycles, respectively. An all-solid-state device provides a voltage window of 1.5 V and more than 70% capacitance retention after 10 000 charge-discharge cycles. Providing 97% capacitance retention upon mechanical bending reveals its potential to be used as an energy storage devices in flexible electronics.

Wafer-Scale Two-Dimensional MoS2 Layers Integrated on Cellulose Substrates Toward Environmentally Friendly Transient Electronic Devices

We explored the feasibility of wafer-scale two-dimensional (2D) molybdenum disulfide (MoS₂) layers toward futuristic environmentally friendly electronics that adopt biodegradable substrates. Large-area (> a few cm²) 2D MoS₂ layers grown on silicon dioxide/silicon (SiO₂/Si) wafers were delaminated and integrated onto a variety of cellulose-based substrates of various components and shapes in a controlled manner; examples of the substrates include planar papers, cylindrical natural rubbers, and 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers. The integrated 2D layers were confirmed to well preserve their intrinsic structural and chemical integrity even on such exotic substrates. Proof-of-concept devices employing large-area 2D MoS₂ layers/cellulose substrates were demonstrated for a variety of applications, including photodetectors, pressure sensors, and field-effect transistors. Furthermore, we demonstrated the complete "dissolution" of the integrated 2D MoS₂ layers in a buffer solution composed of baking soda and deionized water, confirming their environmentally friendly transient characteristics. Moreover, the approaches to delaminate and integrate them do not demand any chemicals except for water, and their original substrates can be recycled for subsequent growths, ensuring excellent chemical benignity and process sustainability.

Wafer-scale 2D PtTe2 layers for high-efficiency mechanically flexible electro-thermal smart window applications

Two-dimensional (2D) transition metal dichalcogenide (TMD) layers have gained increasing attention for a variety of emerging electrical, thermal, and optical applications. Recently developed metallic 2D TMD layers have been projected to exhibit unique attributes unattainable in their semiconducting counterparts; e.g., much higher electrical and thermal conductivities coupled with mechanical flexibility. In this work, we explored 2D platinum ditelluride (2D PtTe2) layers - a relatively new class of metallic 2D TMDs - by studying their previously unexplored electro-thermal properties for unconventional window applications. We prepared wafer-scale 2D PtTe2 layer-coated optically transparent and mechanically flexible willow glasses via a thermally-assisted tellurization of Pt films at a low temperature of 400 °C. The 2D PtTe2 layer-coated windows exhibited a thickness-dependent optical transparency and electrical conductivity of >106 S m-1 - higher than most of the previously explored 2D TMDs. Upon the application of electrical bias, these windows displayed a significant increase in temperature driven by Joule heating as confirmed by the infrared (IR) imaging characterization. Such superior electro-thermal conversion efficiencies inherent to 2D PtTe2 layers were utilized to demonstrate various applications, including thermochromic displays and electrically-driven defogging windows accompanying mechanical flexibility. Comparisons of these performances confirm the superiority of the wafer-scale 2D PtTe2 layers over other nanomaterials explored for such applications.

Automated Assembly of Wafer-Scale 2D TMD Heterostructures of Arbitrary Layer Orientation and Stacking Sequence Using Water Dissoluble Salt Substrates

We report a novel strategy to assemble wafer-scale two-dimensional (2D) transition metal dichalcogenide (TMD) layers of well-defined components and orientations. We directly grew a variety of 2D TMD layers on "water-dissoluble" single-crystalline salt wafers and precisely delaminated them inside water in a chemically benign manner. This manufacturing strategy enables the automated integration of vertically aligned 2D TMD layers as well as 2D/2D heterolayers of arbitrary stacking orders on exotic substrates insensitive to their kind and shape. Furthermore, the original salt wafers can be recycled for additional growths, confirming high process sustainability and scalability. The generality and versatility of this approach have been demonstrated by developing proof-of-concept "all 2D" devices for diverse yet unconventional applications. This study is believed to shed a light on leveraging opportunities of 2D TMD layers toward achieving large-area mechanically reconfigurable devices of various form factors at the industrially demanded scale.

Thickness-Independent Semiconducting-to-Metallic Conversion in Wafer-Scale Two-Dimensional PtSe2 Layers by Plasma-Driven Chalcogen Defect Engineering

Platinum diselenide (PtSe₂) is an emerging class of two-dimensional (2D) transition-metal dichalcogenide (TMD) crystals recently gaining substantial interest, owing to its extraordinary properties absent in conventional 2D TMD layers. Most interestingly, it exhibits a thickness-dependent semiconducting-to-metallic transition, i.e., thick 2D PtSe₂ layers, which are intrinsically metallic, become semiconducting with their thickness reduced below a certain point. Realizing both semiconducting and metallic phases within identical 2D PtSe₂ layers in a spatially well-controlled manner offers unprecedented opportunities toward atomically thin tailored electronic junctions, unattainable with conventional materials. In this study, beyond this thickness-dependent intrinsic semiconducting-to-metallic transition of 2D PtSe₂ layers, we demonstrate that controlled plasma irradiation can "externally" achieve such tunable carrier transports. We grew wafer-scale very thin (a few nm) 2D PtSe₂ layers by a chemical vapor deposition (CVD) method and confirmed their intrinsic semiconducting properties. We then irradiated the material with argon (Ar) plasma, which was intended to make it more semiconducting by thickness reduction. Surprisingly, we discovered a reversed transition of semiconducting to metallic, which is opposite to the prediction concerning their intrinsic thickness-dependent carrier transports. Through extensive structural and chemical characterization, we identified that the plasma irradiation introduces a large concentration of near-atomic defects and selenium (Se) vacancies in initially stoichiometric 2D PtSe₂ layers. Furthermore, we performed density functional theory (DFT) calculations and clarified that the band-gap energy of such defective 2D PtSe₂ layers gradually decreases with increasing defect concentration and dimensions, accompanying a large number of midgap energy states. This corroborative experimental and theoretical study decisively verifies the fundamental mechanism for this externally controlled semiconducting-to-metallic transition in large-area CVD-grown 2D PtSe₂ layers, greatly broadening their versatility for futuristic electronics.

Wafer-Scale Growth of 2D PtTe2 with Layer Orientation Tunable High Electrical Conductivity and Superior Hydrophobicity

Platinum ditelluride (PtTe₂) is an emerging semimetallic two-dimensional (2D) transition-metal dichalcogenide (TMDC) crystal with intriguing band structures and unusual topological properties. Despite much devoted efforts, scalable and controllable synthesis of large-area 2D PtTe₂ with well-defined layer orientation has not been established, leaving its projected structure-property relationship largely unclarified. Herein, we report a scalable low-temperature growth of 2D PtTe₂ layers on an area greater than a few square centimeters by reacting Pt thin films of controlled thickness with vaporized tellurium at 400 °C. We systematically investigated their thickness-dependent 2D layer orientation as well as its correlated electrical conductivity and surface property. We unveil that 2D PtTe₂ layers undergo three distinct growth mode transitions, i.e., horizontally aligned holey layers, continuous layer-by-layer lateral growth, and horizontal-to-vertical layer transition. This growth transition is a consequence of competing thermodynamic and kinetic factors dictated by accumulating internal strain, analogous to the transition of Frank-van der Merwe (FM) to Stranski-Krastanov (SK) growth in epitaxial thin-film models. The exclusive role of the strain on dictating 2D layer orientation has been quantitatively verified by the transmission electron microscopy (TEM) strain mapping analysis. These centimeter-scale 2D PtTe₂ layers exhibit layer orientation tunable metallic transports yielding the highest value of ∼1.7 × 10⁶ S/m at a certain critical thickness, supported by a combined verification of density functional theory (DFT) and electrical measurements. Moreover, they show intrinsically high hydrophobicity manifested by the water contact angle (WCA) value up to ∼117°, which is the highest among all reported 2D TMDCs of comparable dimensions and geometries. Accordingly, this study confirms the high material quality of these emerging large-area 2D PtTe₂ layers, projecting vast opportunities employing their tunable layer morphology and semimetallic properties from investigations of novel quantum phenomena to applications in electrocatalysis.

Strain Effect in Palladium Nanostructures as Nanozymes

While various effects of physicochemical parameters (e.g., size, facet, composition, and internal structure) on the catalytic efficiency of nanozymes (i.e., nanoscale enzyme mimics) have been studied, the strain effect has never been reported and understood before. Herein, we demonstrate the strain effect in nanozymes by using Pd octahedra and icosahedra with peroxidase-like activities as a model system. Strained Pd icosahedra were found to display 2-fold higher peroxidase-like catalytic efficiency than unstrained Pd octahedra. Theoretical analysis suggests that tensile strain is more beneficial to OH radical (a key intermediate for the catalysis) generation than compressive strain. Pd icosahedra are more active than Pd octahedra because icosahedra amplify the surface strain field. As a proof-of-concept demonstration, the strained Pd icosahedra were applied to an immunoassay of biomarkers, outperforming both unstrained Pd octahedra and natural peroxidases. The findings in this research may serve as a strong foundation to guide the design of high-performance nanozymes.

Multifunctional Two-Dimensional PtSe2-Layer Kirigami Conductors with 2000% Stretchability and Metallic-to-Semiconducting Tunability

Two-dimensional transition-metal dichalcogenide (2D TMD) layers are highly attractive for emerging stretchable and foldable electronics owing to their extremely small thickness coupled with extraordinary electrical and optical properties. Although intrinsically large strain limits are projected in them (i.e., several times greater than silicon), integrating 2D TMDs in their pristine forms does not realize superior mechanical tolerance greatly demanded in high-end stretchable and foldable devices of unconventional form factors. In this article, we report a versatile and rational strategy to convert 2D TMDs of limited mechanical tolerance to tailored 3D structures with extremely large mechanical stretchability accompanying well-preserved electrical integrity and modulated transport properties. We employed a concept of strain engineering inspired by an ancient paper-cutting art, known as kirigami patterning, and developed 2D TMD-based kirigami electrical conductors. Specifically, we directly integrated 2D platinum diselenide (2D PtSe₂) layers of controlled carrier transport characteristics on mechanically flexible polyimide (PI) substrates by taking advantage of their low synthesis temperature. The metallic 2D PtSe₂/PI kirigami patterns of optimized dimensions exhibit an extremely large stretchability of ∼2000% without compromising their intrinsic electrical conductance. They also present strain-tunable and reversible photoresponsiveness when interfaced with semiconducting carbon nanotubes (CNTs), benefiting from the formation of 2D PtSe₂/CNT Schottky junctions. Moreover, kirigami field-effect transistors (FETs) employing semiconducting 2D PtSe₂ layers exhibit tunable gate responses coupled with mechanical stretching upon electrolyte gating. The exclusive role of the kirigami pattern parameters in the resulting mechanoelectrical responses was also verified by a finite-element modeling (FEM) simulation. These multifunctional 2D materials in unconventional yet tailored 3D forms are believed to offer vast opportunities for emerging electronics and optoelectronics.

Cerebral Ketones Detected by 3T MR Spectroscopy in Patients with High-Grade Glioma on an Atkins-Based Diet

BACKGROUND AND PURPOSE

Ketogenic diets are being explored as a possible treatment for several neurological diseases, but the physiologic impact on the brain is unknown. The objective of this study was to evaluate the feasibility of 3T MR spectroscopy to monitor brain ketone levels in patients with high-grade gliomas who were on a ketogenic diet (a modified Atkins diet) for 8 weeks.

MATERIALS AND METHODS

Paired pre- and post-ketogenic diet MR spectroscopy data from both the lesion and contralateral hemisphere were analyzed using LCModel software in 10 patients.

RESULTS

At baseline, the ketone bodies acetone and β-hydroxybutyrate were nearly undetectable, but by week 8, they increased in the lesion for both acetone (0.06 ± 0.03 ≥ 0.27 ± 0.06 IU, P = .005) and β-hydroxybutyrate (0.07 ± 0.07 ≥ 0.79 ± 0.32 IU, P = .046). In the contralateral brain, acetone was also significantly increased (0.041 ± 0.01 ≥ 0.16 ± 0.04 IU, P = .004), but not β-hydroxybutyrate. Acetone was detected in 9/10 patients at week 8, and β-hydroxybutyrate, in 5/10. Acetone concentrations in the contralateral brain correlated strongly with higher urine ketones (r = 0.87, P = .001) and lower fasting glucose (r = -0.67, P = .03). Acetoacetate was largely undetectable. Small-but-statistically significant decreases in NAA were also observed in the contralateral hemisphere at 8 weeks.

CONCLUSIONS

This study suggests that 3T MR spectroscopy is feasible for detecting small cerebral metabolic changes associated with a ketogenic diet, provided that appropriate methodology is used.

Experimental Realization of Few Layer Two-Dimensional MoS2 Membranes of Near Atomic Thickness for High Efficiency Water Desalination

A globally imminent shortage of freshwater has been demanding viable strategies for improving desalination efficiencies with the adoption of cost- and energy-efficient membrane materials. The recently explored 2D transition metal dichalcogenides (2D TMDs) of near atomic thickness have been envisioned to offer notable advantages as high-efficiency membranes owing to their structural uniqueness; that is, extremely small thickness and intrinsic atomic porosity. Despite theoretically projected advantages, experimental realization of near atom-thickness 2D TMD-based membranes and their desalination efficiency assessments have remained largely unexplored mainly due to the technical difficulty associated with their seamless large-scale integration. Herein, we report the experimental demonstration of high-efficiency water desalination membranes based on few-layer 2D molybdenum disulfide (MoS₂) of only ∼7 nm thickness. Chemical vapor deposition (CVD)-grown centimeter-scale 2D MoS₂ layers were integrated onto porous polymeric supports with well-preserved structural integrity enabled by a water-assisted 2D layer transfer method. These 2D MoS₂ membranes of near atomic thickness exhibit an excellent combination of high water permeability (>322 L m^-2 h^-1 bar^-1) and high ionic sieving capability (>99%) for various seawater salts including Na⁺, K⁺, Ca²⁺, and Mg²⁺ with a range of concentrations. Moreover, they present near 100% salt ion rejection rates for actual seawater obtained from the Atlantic coast, significantly outperforming the previously developed 2D MoS₂ layer membranes of micrometer thickness as well as conventional reverse osmosis (RO) membranes. Underlying principles behind such remarkably excellent desalination performances are attributed to the intrinsic atomic vacancies inherent to the CVD-grown 2D MoS₂ layers as verified by aberration-corrected electron microscopy characterization.

Two-Dimensional/Three-Dimensional Schottky Junction Photovoltaic Devices Realized by the Direct CVD Growth of vdW 2D PtSe2 Layers on Silicon

Two-dimensional (2D) platinum diselenide (PtSe₂) layers are a new class of near-atom-thick 2D crystals in a van der Waals-assembled structure similar to previously explored many other 2D transition-metal dichalcogenides (2D TMDs). They exhibit distinct advantages over conventional 2D TMDs for electronics and optoelectronics applications such as metallic-to-semiconducting transition, decently high carrier mobility, and low growth temperature. Despite such superiority, much of their electrical properties have remained mostly unexplored, leaving their full technological potential far from being realized. Herein, we report 2D/three-dimensional Schottky junction devices based on vertically aligned metallic 2D PtSe₂ layers integrated on Si wafers. We directly grew 2D PtSe₂ layers of controlled orientation and carrier transport characteristics via a low-temperature chemical vapor deposition process and investigated 2D PtSe₂/Si Schottky junction properties. We unveiled a comprehensive set of material parameters, which decisively confirm the presence of excellent Schottky junctions, i.e., high-current rectification, small ideality factor, and temperature-dependent variation of Schottky barrier heights. Moreover, we observed strong photovoltaic effects in the 2D PtSe₂/Si Schottky junction devices and extended them to realize flexible photovoltaic devices. This study is believed to significantly broaden the versatility of 2D PtSe₂ layers in practical and futuristic electronic devices.

Novel mesoporous electrode materials for symmetric, asymmetric and hybrid supercapacitors

Electrochemical capacitors or supercapacitors have achieved great interest in the recent past due to their potential applications ranging from microelectronic devices to hybrid electric vehicles. Supercapacitors can provide high power densities but their inherently low energy density remains a great challenge. The high-performance supercapacitors utilize large electrode surface area for electrochemical double-layer capacitance and/or pseudocapacitance. To enhance the performance of supercapacitors, various strategies have been adopted such as electrode nanostructuring, hybrid electrode designs using nanocomposite electrodes and hybrid supercapacitor (HSC) configurations. Nanoarchitecturing of electrode-active materials is an effective way of enhancing the performance of supercapacitors as it increases the effective electrode surface area for enhanced electrode/electrolyte interaction. In this review, we focus on the recent developments in the novel electrode materials and various hybrid designs used in supercapacitors for obtaining high specific capacitance and energy density. A family of electrode-active materials including carbon nanomaterials, transition metal-oxides, transition metal-nitrides, transition metal-hydroxides, electronically conducting polymers, and their nanocomposites are discussed in detail. The HSC configurations for attaining enhanced supercapacitor performance as well as strategies to integrate with other microelectronic devices/wearable fabrics are also included.