The luxS deletion reduces the spoilage ability of Shewanella putrefaciens: An analysis focusing on quorum sensing and activated methyl cycle

The luxS mutant strains of Shewanella putrefaciens (SHP) were constructed to investigate the regulations of gene luxS in spoilage ability. The potential regulations of AI-2 quorum sensing (QS) system and activated methyl cycle (AMC) were studied by analyzing the supplementation roles of key circulating substances mediated via luxS, including S-adenosylmethionine (SAM), S-adenosylhomocysteine (SAH), methionine (Met), homocysteine (Hcy) and 4,5-dihydroxy-2,3-pentanedione (DPD). Growth experiments revealed that the luxS deletion led to certain growth limitations of SHP, which were associated with culture medium and exogenous additives. Meanwhile, the decreased biofilm formation and diminished hydrogen sulfide (H2S) production capacity of SHP were observed after luxS deletion. The relatively lower total volatile base nitrogen (TVB-N) contents and higher sensory scores of fish homogenate with luxS mutant strain inoculation also indicated the weaker spoilage-inducing effects after luxS deletion. However, these deficiencies could be offset with the exogenous supply of circulating substances mentioned above. Our findings suggested that the luxS deletion would reduce the spoilage ability of SHP, which was potentially attributed to the disorder of AMC and AI-2 QS system.

Search for exotic decays of the Higgs boson to a pair of pseudoscalars in the μμbb and ττbb final states

A search for exotic decays of the Higgs boson (H ) with a mass of 125Ge V to a pair of light pseudoscalars a 1 is performed in final states where one pseudoscalar decays to two b quarks and the other to a pair of muons or τ leptons. A data sample of proton-proton collisions at s = 13 Te V corresponding to an integrated luminosity of 138fb - 1 recorded with the CMS detector is analyzed. No statistically significant excess is observed over the standard model backgrounds. Upper limits are set at 95% confidence level (CL ) on the Higgs boson branching fraction to μ μ b b and to τ τ b b , via a pair of a 1 s. The limits depend on the pseudoscalar mass m a 1 and are observed to be in the range (0.17-3.3) × 10 - 4 and (1.7-7.7) × 10 - 2 in the μ μ b b and τ τ b b final states, respectively. In the framework of models with two Higgs doublets and a complex scalar singlet (2HDM+S), the results of the two final states are combined to determine upper limits on the branching fraction B ( H → a 1 a 1 → ℓ ℓ b b ) at 95% CL , with ℓ being a muon or a τ lepton. For different types of 2HDM+S, upper bounds on the branching fraction B ( H → a 1 a 1 ) are extracted from the combination of the two channels. In most of the Type II 2HDM+S parameter space, B ( H → a 1 a 1 ) values above 0.23 are excluded at 95% CL for m a 1 values between 15 and 60Ge V .

[Identification of key genes in Wilms tumor based on high-throughput RNA sequencing and their impacts on prognosis and immune responses]

OBJECTIVE

To identify the key genes differentially expressed in Wilms tumor and analyze their potential impacts on prognosis and immune responses of the patients.

METHODS

High-throughput RNA sequencing was used to identify the differentially expressed mRNAs in clinical samples of Wilms tumor and paired normal tissues, and their biological functions were analyzed using GO, KEGG and GSEA enrichment analyses. The hub genes were identified using STRING database, based on which a prognostic model was constructed using LASSO regression. The mutations of the key hub genes were analyzed and their impacts on immunotherapy efficacy was predicted using the cBioPortal platform. RT-qPCR was used to verify the differential expressions of the key hub genes in Wilms tumor.

RESULTS

Of the 1612 differentially expressed genes identified in Wilms tumor, 1030 were up-regulated and 582 were down-regulated, involving mainly cell cycle processes and immune responses. Ten hub genes were identified, among which 4 genes (TP53, MED1, CCNB1 and EGF) were closely related to the survival of children with Wilms tumor. A 3-gene prognostic signature was constructed through LASSO regression analysis, and the patients stratified into with high- and low-risk groups based on this signature had significantly different survival outcomes (HR=1.814, log-rank P=0.002). The AUCs of the 3-, 5- and 7-year survival ROC curves of this model were all greater than 0.7. The overall mutations in the key hub genes or the individual mutations in TP53/CCNB1 were strongly correlated with a lower survival rates, and a high TP53 expression was correlated with a poor immunotherapy efficacy. RT-qPCR confirmed that the key hub genes had significant differential expressions in Wilms tumor tissues and cells.

CONCLUSION

TP53 gene plays an important role in the Wilms tumor and may potentially serve as a new immunotherapeutic biomarker as well as a therapeutic target.

Association between de novo variants of nuclear-encoded mitochondrial-related genes and undiagnosed developmental disorder and autism

BACKGROUND

Evidence suggests that mitochondrial abnormalities increase the risk of two neurodevelopmental disorders: undiagnosed developmental disorder (UDD) and autism spectrum disorder (ASD). However, which nuclear-encoded mitochondrial-related genes (NEMGs) were associated with UDD-ASD is unclear.

AIM

To explore the association between de novo variants (DNVs) of NEMGs and UDD-ASD.

DESIGN

Comprehensive analysis based on DNVs of NEMGs identified in patients (31 058 UDD probands and 10 318 ASD probands) and 4262 controls.

METHODS

By curating NEMGs and cataloging publicly published DNVs in NEMGs, we compared the frequency of DNVs in cases and controls. We also applied a TADA-denovo model to highlight disease-associated NEMGs and characterized them based on gene intolerance, functional networks and expression patterns.

RESULTS

Compared with levels in 4262 controls, an excess of protein-truncating variants and deleterious missense variants in 1421 cataloged NEMGs from 41 376 patients (31 058 UDD and 10 318 ASD probands) was observed. Overall, 3.23% of de novo deleterious missense variants and 3.20% of de novo protein-truncating variants contributed to 1.1% and 0.39% of UDD-ASD cases, respectively. We prioritized 130 disease-associated NEMGs and showed distinct expression patterns in the developing human brain. Disease-associated NEMGs expression was enriched in both excitatory and inhibitory neuronal lineages from the developing human cortex.

CONCLUSIONS

Rare genetic alterations of disease-associated NEMGs may play a role in UDD-ASD development and lay the groundwork for a better understanding of the biology of UDD-ASD.

Comparative investigation of transport and deposition of nebulized particles in nasal airways following various middle turbinectomy

BACKGROUND

Topical intranasal medication is required following functional endoscopic sinus surgery (FESS). The optimal particle size of transnasal nebulization aimed at the sinonasal cavities is not conclusive. The current study aims to evaluate the effect of particle size and various surgery scope of middle turbinectomy (MT) on post-full FESS drug delivery to the sinonasal cavities.

METHODS

Sinonasal reconstructions were performed from post-full FESS CT scans in 6 chronic rhinosinusitis with nasal polyps (CRSwNP) patients. Four additional models representing alternative surgery scopes of MT were established from each post-FESS reconstruction for simulation data comparison. Airflow and particle deposition of nebulized delivery were simulated via computational fluid dynamics (CFD) and validated through in vitro experiments. The optimal particle sizes reaching a deposition of at least 75% of the maximum in the targeted regions were identified.

RESULTS

The drug deposition rate onto the targeted regions increased following MT, with the greatest deposition following posterior MT (P-MT). Droplets in the range of 18-26 μm reached a deposition of larger than 75% of the maximum onto the targeted regions. Drug delivery rate in the sinonasal cavities varied significantly among individuals and across different types of MT with varying surgical scopes.

CONCLUSIONS

This study is the first to investigate the effect of various surgery scope on drug delivery by transnasal nebulization to the sinonasal cavities. The findings strongly affirm the vast potential of transnasal nebulization as an effective post-FESS treatment option. Moreover, it emphasizes that the drug delivery process via atomizers to the nasal cavity and paranasal sinuses is highly sensitive to the particle size.

Observation of WWγ Production and Search for Hγ Production in Proton-Proton Collisions at sqrt[s]=13 TeV

The observation of WWγ production in proton-proton collisions at a center-of-mass energy of 13 TeV with an integrated luminosity of 138  fb^{-1} is presented. The observed (expected) significance is 5.6 (5.1) standard deviations. Events are selected by requiring exactly two leptons (one electron and one muon) of opposite charge, moderate missing transverse momentum, and a photon. The measured fiducial cross section for WWγ is 5.9±0.8(stat)±0.8(syst)±0.7(modeling)  fb, in agreement with the next-to-leading order quantum chromodynamics prediction. The analysis is extended with a search for the associated production of the Higgs boson and a photon, which is generated by a coupling of the Higgs boson to light quarks. The result is used to constrain the Higgs boson couplings to light quarks.

Enhanced Plastic Stability: Achieving High Performance in a Al6xxx Alloy Fabricated by Additive Manufacturing

Additive manufacturing (AM) facilitates the creation of materials with unique microstructural features and distinctive phenomena as compared to conventional manufacturing methods. Among the various well-fabricated AM alloys, aluminum alloys garner substantial attention due to their extensive applications in the automotive and aerospace industries. In this work, an Al6xxx alloy is successfully fabricated with outstanding performance. A nucleation agent is introduced to diminish the susceptibility to cracking during the AM process, thereby inducing a heterogeneous microstructure in this alloy. However, the introduction of ultrafine grains induces plastic instability, evidenced by the presence of Lüders band. This work investigates the evolution of the Lüders band and the strategy to reduce their undesirable effect. The heterogeneity destabilizes the band propagation and thus deteriorates the ductility. Through a T6 heat treatment, the local Lüders strain decreases from 10.0% to 6.2%, leading to a substantial enhancement in plastic stability. With the increase in grain growth and the enlargement of coarse grain regions, the mismatch between the local and macroscopic Lüders strain disappears. Importantly, the strength and the thermal conductivity are concurrently increased. The findings demonstrate the significance of ensuring plastic stability to achieve improved strength-ductility trade-off in AM alloys with heterogeneous microstructures.

New Structures in the J/ψJ/ψ Mass Spectrum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search is reported for near-threshold structures in the J/ψJ/ψ invariant mass spectrum produced in proton-proton collisions at sqrt[s]=13  TeV from data collected by the CMS experiment, corresponding to an integrated luminosity of 135  fb^{-1}. Three structures are found, and a model with quantum interference among these structures provides a good description of the data. A new structure is observed with a local significance above 5 standard deviations at a mass of 6638_{-38}^{+43}(stat)_{-31}^{+16}(syst)  MeV. Another structure with even higher significance is found at a mass of 6847_{-28}^{+44}(stat)_{-20}^{+48}(syst)  MeV, which is consistent with the X(6900) resonance reported by the LHCb experiment and confirmed by the ATLAS experiment. Evidence for another new structure, with a local significance of 4.7 standard deviations, is found at a mass of 7134_{-25}^{+48}(stat)_{-15}^{+41}(syst)  MeV. Results are also reported for a model without interference, which does not fit the data as well and shows mass shifts up to 150 MeV relative to the model with interference.

Long-term prognostic value of thyroid hormones in left ventricular noncompaction

PURPOSE

Thyroid function is closely related to the prognosis of cardiovascular diseases. This study aimed to explore the predictive value of thyroid hormones for adverse cardiovascular outcomes in left ventricular noncompaction (LVNC).

METHODS

This longitudinal cohort study enrolled 388 consecutive LVNC patients with complete thyroid function profiles and comprehensive cardiovascular assessment. Potential predictors for adverse outcomes were thoroughly evaluated.

RESULTS

Over a median follow-up of 5.22 years, primary outcome (the combination of cardiovascular mortality and heart transplantation) occurred in 98 (25.3%) patients. For secondary outcomes, 75 (19.3%) patients died and 130 (33.5%) patients experienced major adverse cardiovascular events (MACE). Multivariable Cox analysis identified that free triiodothyronine (FT3) was independently associated with both primary (HR 0.455, 95%CI 0.313-0.664) and secondary (HR 0.547, 95%CI 0.349-0.858; HR 0.663, 95%CI 0.475-0.925) outcomes. Restricted cubic spline analysis illustrated that the risk for adverse outcomes increased significantly with the decline of serum FT3. The LVNC cohort was further stratified according to tertiles of FT3 levels. Individuals with lower FT3 levels in the tertile 1 group suffered from severe cardiac dysfunction and remodeling, resulting in higher incidence of mortality and MACE (Log-rank P < 0.001). Subgroup analysis revealed that lower concentration of FT3 was linked to worse prognosis, particularly for patients with left atrial diameter ≥ 40 mm or left ventricular ejection fraction ≤ 35%. Adding FT3 to the pre-existing risk score for MACE in LVNC improved its predictive performance.

CONCLUSION

Through the long-term investigation on a large LVNC cohort, we demonstrated that low FT3 level was an independent predictor for adverse cardiovascular outcomes.

Search for Scalar Leptoquarks Produced via τ-Lepton-Quark Scattering in pp Collisions at sqrt[s]=13 TeV

The first search for scalar leptoquarks produced in τ-lepton-quark collisions is presented. It is based on a set of proton-proton collision data recorded with the CMS detector at the LHC at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138  fb^{-1}. The reconstructed final state consists of a jet, significant missing transverse momentum, and a τ lepton reconstructed through its hadronic or leptonic decays. Limits are set on the product of the leptoquark production cross section and branching fraction and interpreted as exclusions in the plane of the leptoquark mass and the leptoquark-τ-quark coupling strength.

China's prevention and control experience of echinococcosis: A 19-year retrospective

Echinococcosis poses a significant threat to public health. The Chinese government has implemented prevention and control measures to mitigate the impact of the disease. By analyzing data from the Chinese Center for Disease Control and Prevention and the State Council of the People's Republic of China, we found that implementation of these measures has reduced the infection rate by nearly 50% between 2004 to 2022 (from 0.3975 to 0.1944 per 100,000 person-years). Nonetheless, some regions still bear a significant disease burden, and lack of detailed information limites further evaluation of the effects on both alveolar and cystic echinococcosis. Our analysis supports the continuing implementation of these measures and suggests that enhanced wildlife management, case-based strategies, and surveillance systems will facilitate disease control.

The stable co-pigmented roselle anthocyanin active film extended shelf life of Penaeus vannamei better: Mechanism revealed by the TMT-labeled proteomic strategy

In order to investigate the influences of modified RAE-based film on shrimp quality, the proteomic approach was performed to elucidate preservation mechanism. Results showed that the modified RAE-based film kept better shrimp quality compared with natural RAE-based film in terms of determined biochemical parameters and estimated shelf-life. Totally, 49 differentially abundance proteins (DAPs) were identified compared with shrimp without packaging. Bioinformatics analysis demonstrated that the modified RAE-based film could maintain functional DAPs which were mainly distributed in the binding, catalytic activity, etc., and metabolic signaling pathways like melanogenesis signaling pathway were remarkably enriched. Meanwhile, there were 25 DAPs showing close relationship with quality traits, and some of them, such as myosin chains, troponin I and heat shock protein were considered as the potential biomarkers to evaluate shrimp quality deterioration. In conclusion, this study revealed the preservation mechanism of modified RAE-based active film on shrimp quality at the protein molecular level.

Search for Inelastic Dark Matter in Events with Two Displaced Muons and Missing Transverse Momentum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for dark matter in events with a displaced nonresonant muon pair and missing transverse momentum is presented. The analysis is performed using an integrated luminosity of 138  fb^{-1} of proton-proton (pp) collision data at a center-of-mass energy of 13 TeV produced by the LHC in 2016-2018. No significant excess over the predicted backgrounds is observed. Upper limits are set on the product of the inelastic dark matter production cross section σ(pp→A^{'}→χ_{1}χ_{2}) and the decay branching fraction B(χ_{2}→χ_{1}μ^{+}μ^{-}), where A^{'} is a dark photon and χ_{1} and χ_{2} are states in the dark sector with near mass degeneracy. This is the first dedicated collider search for inelastic dark matter.

Luminosity determination using Z boson production at the CMS experiment

The measurement of Z boson production is presented as a method to determine the integrated luminosity of CMS data sets. The analysis uses proton-proton collision data, recorded by the CMS experiment at the CERN LHC in 2017 at a center-of-mass energy of 13Te V . Events with Z bosons decaying into a pair of muons are selected. The total number of Z bosons produced in a fiducial volume is determined, together with the identification efficiencies and correlations from the same data set, in small intervals of 20pb - 1 of integrated luminosity, thus facilitating the efficiency and rate measurement as a function of time and instantaneous luminosity. Using the ratio of the efficiency-corrected numbers of Z bosons, the precisely measured integrated luminosity of one data set is used to determine the luminosity of another. For the first time, a full quantitative uncertainty analysis of the use of Z  bosons for the integrated luminosity measurement is performed. The uncertainty in the extrapolation between two data sets, recorded in 2017 at low and high instantaneous luminosity, is less than 0.5%. We show that the Z boson rate measurement constitutes a precise method, complementary to traditional methods, with the potential to improve the measurement of the integrated luminosity.

Measurement of the production cross section for a W boson in association with a charm quark in proton-proton collisions at s=13TeV

The strange quark content of the proton is probed through the measurement of the production cross section for a W boson and a charm (c) quark in proton-proton collisions at a center-of-mass energy of 13Te V . The analysis uses a data sample corresponding to a total integrated luminosity of 138fb - 1 collected with the CMS detector at the LHC. The W bosons are identified through their leptonic decays to an electron or a muon, and a neutrino. Charm jets are tagged using the presence of a muon or a secondary vertex inside the jet. The W + c production cross section and the cross section ratio R c ± = σ ( W + + c ¯ ) / σ ( W - + c ) are measured inclusively and differentially as functions of the transverse momentum and the pseudorapidity of the lepton originating from the W boson decay. The precision of the measurements is improved with respect to previous studies, reaching 1% in R c ± = 0.950 ± 0.005 (stat) ± 0.010 (syst) . The measurements are compared with theoretical predictions up to next-to-next-to-leading order in perturbative quantum chromodynamics.

Probing Small Bjorken-x Nuclear Gluonic Structure via Coherent J/ψ Photoproduction in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

Quasireal photons exchanged in relativistic heavy ion interactions are powerful probes of the gluonic structure of nuclei. The coherent J/ψ photoproduction cross section in ultraperipheral lead-lead collisions is measured as a function of photon-nucleus center-of-mass energies per nucleon (W_{γN}^{Pb}) over a wide range of 40 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

The first probe of a FLASH proton beam by PET

The recently observed FLASH effect related to high doses delivered with high rates has the potential to revolutionize radiation cancer therapy if promising results are confirmed and an underlying mechanism understood. Comprehensive measurements are essential to elucidate the phenomenon. We report the first-ever demonstration of measurements of successive in-spill and post-spill emissions of gammas arising from irradiations by a FLASH proton beam. A small positron emission tomography (PET) system was exposed in an ocular beam of the Proton Therapy Center at MD Anderson Cancer Center to view phantoms irradiated by 3.5 × 1010protons with a kinetic energy of 75.8 MeV delivered in 101.5 ms-long spills yielding a dose rate of 164 Gy s-1. Most in-spill events were due to prompt gammas. Reconstructed post-spill tomographic events, recorded for up to 20 min, yielded quantitative imaging and dosimetric information. These findings open a new and novel modality for imaging and monitoring of FLASH proton therapy exploiting in-spill prompt gamma imaging followed by post-spill PET imaging.

HSPA8 acts as an amyloidase to suppress necroptosis by inhibiting and reversing functional amyloid formation

Ultra-stable fibrous structure is a hallmark of amyloids. In contrast to canonical disease-related amyloids, emerging research indicates that a significant number of cellular amyloids, termed 'functional amyloids', contribute to signal transduction as temporal signaling hubs in humans. However, it is unclear how these functional amyloids are effectively disassembled to terminate signal transduction. RHIM motif-containing amyloids, the largest functional amyloid family discovered thus far, play an important role in mediating necroptosis signal transduction in mammalian cells. Here, we identify heat shock protein family A member 8 (HSPA8) as a new type of enzyme - which we name as 'amyloidase' - that directly disassembles RHIM-amyloids to inhibit necroptosis signaling in cells and mice. Different from its role in chaperone-mediated autophagy where it selects substrates containing a KFERQ-like motif, HSPA8 specifically recognizes RHIM-containing proteins through a hydrophobic hexapeptide motif N(X1)φ(X3). The SBD domain of HSPA8 interacts with RHIM-containing proteins, preventing proximate RHIM monomers from stacking into functional fibrils; furthermore, with the NBD domain supplying energy via ATP hydrolysis, HSPA8 breaks down pre-formed RHIM-amyloids into non-functional monomers. Notably, HSPA8's amyloidase activity in disassembling functional RHIM-amyloids does not require its co-chaperone system. Using this amyloidase activity, HSPA8 reverses the initiator RHIM-amyloids (formed by RIP1, ZBP1, and TRIF) to prevent necroptosis initiation, and reverses RIP3-amyloid to prevent necroptosis execution, thus eliminating multi-level RHIM-amyloids to effectively prevent spontaneous necroptosis activation. The discovery that HSPA8 acts as an amyloidase dismantling functional amyloids provides a fundamental understanding of the reversibility nature of functional amyloids, a property distinguishing them from disease-related amyloids that are unbreakable in vivo.

The highly stable indicator film incorporating roselle anthocyanin co-pigmented with oxalic acid: Preparation, characterization and freshness monitoring application

A novel stable PVA/HPMC/roselle anthocyanin (RAE) indicator film co-pigmented with oxalic acid (OA) was prepared, its properties, application effects and stability enhancement mechanism were investigated correspondingly. The structural characterization revealed that more stable network was formed due to the co-pigmentation facilitated generation of molecular interactions. Meanwhile, the co-pigmentation improved film mechanical and hydrophobic properties compared to both PVA/HPMC/RAE newly prepared (PHRN) or stored (PHRS) film, expressing as higher tensile strength values (12.25% and 14.44% higher than PHRN and PHRS), lower water solubility (7.22% and 10.09% lower than PHRN and PHRS) and water vapor permeability values (33.20% and 21.05% lower than PHRN and PHRS) of PVA/HPMC/RAE/OA newly prepared (PHON) or stored (PHOS) film. Compared with the PHRS film, the PHOS film still presented more distinguishable color variations when being applied to monitor shrimp freshness, owing to the stabilization behaviors of co-pigmentation in anthocyanin conformation. Hence, the co-pigmentation was an effective strategy to enhance film stability, physical and pH-responsive properties after long term storage, leading to better film monitoring effects when applied in real-time freshness monitoring.

Additive manufacturing of alloys with programmable microstructure and properties

In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy's solidification structure, we can 'program' recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM.

Measurement of the top quark mass using a profile likelihood approach with the lepton + jets final states in proton-proton collisions at s=13TeV

The mass of the top quark is measured in 36.3fb - 1 of LHC proton-proton collision data collected with the CMS detector at s = 13 Te V . The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77 ± 0.37 Ge V . This approach significantly improves the precision over previous measurements.

A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at s=13TeV

A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at s = 13 Te V by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb - 1 . The 95% confidence level upper limit set on the branching fraction of the 125Ge V Higgs boson to invisible particles, B ( H → inv ) , is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B ( H → inv ) searches carried out at s = 7 , 8, and 13Te V in complementary production modes. The combined upper limit at 95% confidence level on B ( H → inv ) is 0.15 (0.08 expected).

Observation of τ Lepton Pair Production in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

We present an observation of photon-photon production of τ lepton pairs in ultraperipheral lead-lead collisions. The measurement is based on a data sample with an integrated luminosity of 404  μb^{-1} collected by the CMS experiment at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=5.02  TeV. The γγ→τ^{+}τ^{-} process is observed for τ^{+}τ^{-} events with a muon and three charged hadrons in the final state. The measured fiducial cross section is σ(γγ→τ^{+}τ^{-})=4.8±0.6(stat)±0.5(syst)  μb, where the second (third) term corresponds to the statistical (systematic) uncertainty in σ(γγ→τ^{+}τ^{-}) in agreement with leading-order QED predictions. Using σ(γγ→τ^{+}τ^{-}), we estimate a model-dependent value of the anomalous magnetic moment of the τ lepton of a_{τ}=0.001_{-0.089}^{+0.055}.

Ionic strength-mediated protein and flavor studies on thermally processed hairtail pieces

This study aimed to investigate the impact of different ionic strengths on the texture, protein, and flavor of thermally processed hairtail pieces. Incorporating salt ions into the heat treatment process had a positive impact on the quality of the cooked hairtail pieces. The pieces treated with 2 M NaCl showed superior texture and sensory scores. The ionic strength had a significant positive correlation with the chewiness and cohesion of cooked hairtail (p < 0.01). Furthermore, the myofibrillar protein content and total sulfhydryl content increased significantly. Circular dichroism spectra analysis revealed a transition in the protein structure from a β-sheet structure to an α-helical structure as the ionic strength decreased. The ionic strength had a significant impact on the interaction between protein and flavor compounds. Specifically, it impacted the expression of certain volatile components (p < 0.05). Our study suggests that selecting the appropriate cooking method is crucial for both healthiness and sensory quality of processed hairtail products, and ionic strength mediation is superior in both aspects.

A Comparison of Two Plan Optimization Methods in Three-Dimensional Brachytherapy for Cervical Cancer

PURPOSE/OBJECTIVE(S)

To compare dose distributions created by using two Inverse Planning Simulated Annealing (IPSA) and Hybrid Inverse Planning Optimization (HIPO) in three-dimensional (with CT image guidance) brachytherapy planning for cervical cancer.

MATERIALS/METHODS

Brachytherapy plans for thirty patients with cervical cancer were created using the IPSA and HIPO algorithms (The IPSA algorithm is calculated based on the anatomical structure, and the simulated annealing algorithm is used to optimize the residence time, and the HIPO algorithm is the optimization and replacement for the IPSA). To obtain a HIPO plan, a manually optimized post-loading treatment plan was applied to these 30 patients, and then the treatment plan was reoptimized using the HIPO algorithm based on the original image information. Individual patients will consider interpolation therapy according to the needs of their condition. The types of plans were compared based on a variety of dose volume parameters, including the mean dose covering 90% of high-risk clinical target volume (D90 for HR-CTV), the mean dose to 2 cm3 volume (D2cc) for bladder, rectum, intestine and sigmoid, and average treatment time were compared and analyzed.

RESULTS

Compared with the two groups of plans, mean value of HR-CTV D90 for the HIPO plans was (585 cGy), which was significantly higher than that for the IPSA plans (567 cGy. This difference is statistically significant (P<0.05). The HIPO plans had mean D2cc 422±47 cGy for bladder, 403±38 cGy for rectum, which were lower than those from the SA plans, i.e., 446±42 cGy for bladder and 427±31 cGy for rectum; These differences were statistically significant (t = 5.125, 4.729, P <0.05). There was no statistically significant difference in the sigmoid D2cc doses between the two algorithms. The treatment times for delivering the two types of plans were not significant different.

CONCLUSION

Depending on patient's condition, whether conventional brachytherapy therapy or interpolation therapy is used, the use of the HIPO algorithm to design the treatment regimen without additional treatment time can provide a higher target dose than the manually optimized brachytherapy regimen. Meanwhile, the bladder and rectum doses can be reduced to a certain extent under the premise of ensuring that the target dose met the treatment requirements. There is some increasement for the intestine dose with HIPO planning group, but the dose limits required by the guidelines are still met clinical requirement.

Quality Assurance in a Phase III, Multicenter, Randomized Trial of POstmastectomy radioThErapy in Node posiTive Breast Cancer with or without Internal mAmmary nodaL Irradiation (POTENTIAL): A Planning Dummy Run

PURPOSE/OBJECTIVE(S)

To report the planning dummy run results of the POstmastectomy radioThErapy in Node posiTive breast cancer with or without Internal mAmmary nodaL irradiation (POTENTIAL) trial-a multicenter, randomized, phase 3 trial-to evaluate postmastectomy radiotherapy, with or without internal mammary nodal irradiation, for patients with high-risk breast cancer.

MATERIALS/METHODS

All participating institutions were provided the contours of the dummy run case, and they generated radiotherapy (RT) plans per protocol guidelines. The plans were reviewed and feedback were provided by the quality assurance team, after which the institutions resubmitted revised plans. The information on beams arrangement, skin flash, inhomogeneity corrections, and protocol compliance was assessed both in the primary and final submission.

RESULTS

Theplans from 26 institutions were included in the analysis. A number of major deviations were found in the primary submission, such as less strict constraint on organs at risk (OARs) V5Gy, and no application of chest wall skin flash. The protocol compliance rates of the dose coverage for the planning target volume of the chest wall (PTVcw), PTV of supra/infraclavicular fossa plus axilla levels I, II, III (PTVsc+ax), and PTV of the IMN region (PTVim) were all significantly improved in the final submission compared with those in the primary submission, which were 96.2% vs. 69.2%, 100% vs. 76.9%, and 88.4% vs. 53.8, respectively. For OARs, the protocol compliance rates of heart Dmean, left anterior descending coronary artery V40Gy, ipsilateral lung V5Gy, and stomach V5Gy were significantly improved.

CONCLUSION

All major deviations were corrected and protocol compliance was significantly improved and of high level in the final submission. Moreover, the variations were reduced. Therefore, a planning dummy run was essential to guarantee good RT plan quality and inter-institutional consistency for multicenter trials.

Measurement of the Dependence of the Hadron Production Fraction Ratios f_{s}/f_{u} and f_{d}/f_{u} on B Meson Kinematic Variables in Proton-Proton Collisions at sqrt[s]=13 TeV

The dependence of the ratio between the B_{s}^{0} and B^{+} hadron production fractions, f_{s}/f_{u}, on the transverse momentum (p_{T}) and rapidity of the B mesons is studied using the decay channels B_{s}^{0}→J/ψϕ and B^{+}→J/ψK^{+}. The analysis uses a data sample of proton-proton collisions at a center-of-mass energy of 13 TeV, collected by the CMS experiment in 2018 and corresponding to an integrated luminosity of 61.6  fb^{-1}. The f_{s}/f_{u} ratio is observed to depend on the B p_{T} and to be consistent with becoming asymptotically constant at large p_{T}. No rapidity dependence is observed. The ratio of the B^{0} to B^{+} meson production fractions, f_{d}/f_{u}, is also measured, for the first time in proton-proton collisions, using the B^{0}→J/ψK^{*0} decay channel. The result is found to be within 1 standard deviation of unity and independent of p_{T} and rapidity, as expected from isospin invariance.

Mesoscopic Model for Disjoining Pressure Effects in Nanoscale Thin Liquid Films and Evaporating Extended Meniscuses

Disjoining pressure effect is the key to describe contact line dynamics, micro/nanoscale liquid-vapor phase change heat transfer, and liquid transport in nanopores. In this paper, by combining a mesoscopic approach for nanoscale liquid-vapor interfacial transport and a mean-field approximation of the long-range solid-fluid molecular interaction, a mesoscopic model for the disjoining pressure effect in nanoscale thin liquid films is proposed. The capability of this model to delineate the disjoining pressure effect is validated. We demonstrate that the Hamaker constant determined from our model agrees very well with molecular dynamics (MD) simulation and that the transient evaporation/condensation mass flux predicted by this mesoscopic model is also consistent with the kinetic theory. Using this model, we investigate the characteristics of the evaporating extended meniscus in a nanochannel. The nonevaporating film region, the evaporating thin-film region, and the intrinsic meniscus region are successfully captured by our model. Our results suggest that the apparent contact angle and thickness of the nonevaporating liquid film are self-tuned according to the evaporation rate, and a higher evaporation rate results a in larger apparent contact angle and thinner nonevaporating liquid film. We also show that disjoining pressure plays a dominant role in the nonevaporating film region and suppresses the evaporation in this region, while capillary pressure dominates the intrinsic meniscus region. Strong evaporation takes place in the thin-film region, and both the disjoining pressure and capillary pressure contribute to the total pressure difference that delivers the liquid from the intrinsic meniscus region to the evaporating thin-film region, compensating for the liquid mass loss due to strong evaporation. Our work provides a new avenue for investigating thin liquid film spreading, liquid transport in nanopores, and microscopic liquid-vapor phase change heat/mass transfer mechanisms near the three-phase contact line region.

Search for Exotic Higgs Boson Decays H→AA→4γ with Events Containing Two Merged Diphotons in Proton-Proton Collisions at sqrt[s]=13 TeV

We present the first direct search for exotic Higgs boson decays H→AA, A→γγ in events with two photonlike objects. The hypothetical particle A is a low-mass spin-0 particle decaying promptly to a merged diphoton reconstructed as a single photonlike object. We analyze the data collected by the CMS experiment at sqrt[s]=13  TeV corresponding to an integrated luminosity of 136  fb^{-1}. No excess above the estimated background is found. We set upper limits on the branching fraction B(H→AA→4γ) of (0.9-3.3)×10^{-3} at 95% confidence level for masses of A in the range 0.1-1.2 GeV.

Observation of Same-Sign WW Production from Double Parton Scattering in Proton-Proton Collisions at sqrt[s]=13 TeV

The first observation of the production of W^{±}W^{±} bosons from double parton scattering processes using same-sign electron-muon and dimuon events in proton-proton collisions is reported. The data sample corresponds to an integrated luminosity of 138  fb^{-1} recorded at a center-of-mass energy of 13 TeV using the CMS detector at the CERN LHC. Multivariate discriminants are used to distinguish the signal process from the main backgrounds. A binned maximum likelihood fit is performed to extract the signal cross section. The measured cross section for production of same-sign W bosons decaying leptonically is 80.7±11.2(stat) _{-8.6}^{+9.5}(syst)±12.1(model)  fb, whereas the measured fiducial cross section is 6.28±0.81(stat)±0.69(syst)±0.37(model)  fb. The observed significance of the signal is 6.2 standard deviations above the background-only hypothesis.

Observation of the Rare Decay of the η Meson to Four Muons

A search for the rare η→μ^{+}μ^{-}μ^{+}μ^{-} double-Dalitz decay is performed using a sample of proton-proton collisions, collected by the CMS experiment at the CERN LHC with high-rate muon triggers during 2017 and 2018 and corresponding to an integrated luminosity of 101  fb^{-1}. A signal having a statistical significance well in excess of 5 standard deviations is observed. Using the η→μ^{+}μ^{-} decay as normalization, the branching fraction B(η→μ^{+}μ^{-}μ^{+}μ^{-})=[5.0±0.8(stat)±0.7(syst)±0.7(B_{2μ})]×10^{-9} is measured, where the last term is the uncertainty in the normalization channel branching fraction. This work achieves an improved precision of over 5 orders of magnitude compared to previous results, leading to the first measurement of this branching fraction, which is found to agree with theoretical predictions.

Measurements of jet multiplicity and jet transverse momentum in multijet events in proton-proton collisions at s=13TeV

Multijet events at large transverse momentum (p T ) are measured at s = 13 Te V using data recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 36.3 fb - 1 . The multiplicity of jets with p T > 50 Ge V that are produced in association with a high-p T dijet system is measured in various ranges of the p T of the jet with the highest transverse momentum and as a function of the azimuthal angle difference Δ ϕ 1 , 2 between the two highest p T jets in the dijet system. The differential production cross sections are measured as a function of the transverse momenta of the four highest p T jets. The measurements are compared with leading and next-to-leading order matrix element calculations supplemented with simulations of parton shower, hadronization, and multiparton interactions. In addition, the measurements are compared with next-to-leading order matrix element calculations combined with transverse-momentum dependent parton densities and transverse-momentum dependent parton shower.

Azimuthal correlations in Z +jets events in proton-proton collisions at s=13TeV

The production of Z bosons associated with jets is measured in pp collisions at s = 13 Te V with data recorded with the CMS experiment at the LHC corresponding to an integrated luminosity of 36.3fb - 1 . The multiplicity of jets with transverse momentum p T > 30 Ge V is measured for different regions of the Z boson's p T ( Z ) , from lower than 10Ge V to higher than 100Ge V . The azimuthal correlation Δ ϕ between the Z boson and the leading jet, as well as the correlations between the two leading jets are measured in three regions of p T ( Z ) . The measurements are compared with several predictions at leading and next-to-leading orders, interfaced with parton showers. Predictions based on transverse-momentum dependent parton distributions and corresponding parton showers give a good description of the measurement in the regions where multiple parton interactions and higher jet multiplicities are not important. The effects of multiple parton interactions are shown to be important to correctly describe the measured spectra in the low p T ( Z ) regions.

Search for Higgs Boson Decay to a Charm Quark-Antiquark Pair in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for the standard model Higgs boson decaying to a charm quark-antiquark pair, H→cc[over ¯], produced in association with a leptonically decaying V (W or Z) boson is presented. The search is performed with proton-proton collisions at sqrt[s]=13  TeV collected by the CMS experiment, corresponding to an integrated luminosity of 138  fb^{-1}. Novel charm jet identification and analysis methods using machine learning techniques are employed. The analysis is validated by searching for Z→cc[over ¯] in VZ events, leading to its first observation at a hadron collider with a significance of 5.7 standard deviations. The observed (expected) upper limit on σ(VH)B(H→cc[over ¯]) is 0.94 (0.50_{-0.15}^{+0.22})pb at 95% confidence level (C.L.), corresponding to 14 (7.6_{-2.3}^{+3.4}) times the standard model prediction. For the Higgs-charm Yukawa coupling modifier, κ_{c}, the observed (expected) 95% C.L. interval is 1.1<|κ_{c}|<5.5 (|κ_{c}|<3.4), the most stringent constraint to date.

Azimuthal Correlations within Exclusive Dijets with Large Momentum Transfer in Photon-Lead Collisions

The structure of nucleons is multidimensional and depends on the transverse momenta, spatial geometry, and polarization of the constituent partons. Such a structure can be studied using high-energy photons produced in ultraperipheral heavy-ion collisions. The first measurement of the azimuthal angular correlations of exclusively produced events with two jets in photon-lead interactions at large momentum transfer is presented, a process that is considered to be sensitive to the underlying nuclear gluon polarization. This study uses a data sample of ultraperipheral lead-lead collisions at sqrt[s_{NN}]=5.02  TeV, corresponding to an integrated luminosity of 0.38  nb^{-1}, collected with the CMS experiment at the LHC. The measured second harmonic of the correlation between the sum and difference of the two jet transverse momentum vectors is found to be positive, and rising, as the dijet transverse momentum increases. A well-tuned model that has been successful at describing a wide range of proton scattering data from the HERA experiments fails to describe the observed correlations, suggesting the presence of gluon polarization effects.

Preoperative contrast-enhanced CT-based radiomics signature for predicting hypoxia-inducible factor 1α expression in retroperitoneal sarcoma

AIM

To develop and test a contrast-enhanced computed tomography (CECT)-based radiomics signature (RS) to preoperatively predict hypoxia-inducible factor 1α (HIF-1α) expression in retroperitoneal sarcoma (RPS).

MATERIALS AND METHODS

This study included 129 patients with RPS retrospectively who underwent CECT, including 64 male and 65 female patients (55 [2-84] years). Participants were divided into a training set comprising 85 patients and a test set comprising 44 patients. Clinical data and CECT findings of all patients were collected. RS construction was performed by the minimum redundancy maximum relevance method and least absolute shrinkage and selection operator algorithm. The clinical information was analysed by univariate and multivariate logistic regression analysis. The RS and risk factors were included to build a radiomics nomogram. The predictive efficacy of different models was evaluated by accuracy, area under the receiver operating characteristic curve (AUC), and decision curve analysis.

RESULTS

The RS combined signature was constructed on the basis of multi-phase CECT and had an accuracy of 0.795 and an AUC of 0.719 (95% confidence interval [CI], 0.552-0.886) in the test set, which were higher than that of the radiomics nomogram (accuracy: 0.636; AUC: 0.702 [95% CI, 0.547-0.857]) and the clinical model (accuracy: 0.682; AUC: 0.486 [95% CI, 0.324-0.647]). The decision curve analysis showed that the RS combined signature provided better clinical application than the clinical model and radiomics nomogram.

CONCLUSIONS

The multi-phase CECT-based RS constructed can be used as a powerful tool for predicting HIF-1α expression in patients with RPS.

Search for Nonresonant Pair Production of Highly Energetic Higgs Bosons Decaying to Bottom Quarks

A search for nonresonant Higgs boson (H) pair production via gluon and vector boson (V) fusion is performed in the four-bottom-quark final state, using proton-proton collision data at 13 TeV corresponding to 138  fb^{-1} collected by the CMS experiment at the LHC. The analysis targets Lorentz-boosted H pairs identified using a graph neural network. It constrains the strengths relative to the standard model of the H self-coupling and the quartic VVHH couplings, κ_{2V}, excluding κ_{2V}=0 for the first time, with a significance of 6.3 standard deviations when other H couplings are fixed to their standard model values.

Search for Higgs Boson and Observation of Z Boson through Their Decay into a Charm Quark-Antiquark Pair in Boosted Topologies in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for the standard model (SM) Higgs boson (H) produced with transverse momentum (p_{T}) greater than 450 GeV and decaying to a charm quark-antiquark (cc[over ¯]) pair is presented. The search is performed using proton-proton collision data collected at sqrt[s]=13  TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138  fb^{-1}. Boosted H→cc[over ¯] decay products are reconstructed as a single large-radius jet and identified using a deep neural network charm tagging technique. The method is validated by measuring the Z→cc[over ¯] decay process, which is observed in association with jets at high p_{T} for the first time with a signal strength of 1.00_{-0.14}^{+0.17}(syst)±0.08(theo)±0.06(stat), defined as the ratio of the observed process rate to the SM expectation. The observed (expected) upper limit on σ(H)B(H→cc[over ¯]) is set at 47 (39) times the SM prediction at 95% confidence level.

Measurements of the Higgs boson production cross section and couplings in the W boson pair decay channel in proton-proton collisions at s=13TeV

Production cross sections of the standard model Higgs boson decaying to a pair of W bosons are measured in proton-proton collisions at a center-of-mass energy of 13Te V . The analysis targets Higgs bosons produced via gluon fusion, vector boson fusion, and in association with a W or Z boson. Candidate events are required to have at least two charged leptons and moderate missing transverse momentum, targeting events with at least one leptonically decaying W boson originating from the Higgs boson. Results are presented in the form of inclusive and differential cross sections in the simplified template cross section framework, as well as couplings of the Higgs boson to vector bosons and fermions. The data set collected by the CMS detector during 2016-2018 is used, corresponding to an integrated luminosity of 138fb - 1 . The signal strength modifier μ , defined as the ratio of the observed production rate in a given decay channel to the standard model expectation, is measured to be μ = 0 . 95 - 0.09 + 0.10 . All results are found to be compatible with the standard model within the uncertainties.

Measurement of the mass dependence of the transverse momentum of lepton pairs in Drell-Yan production in proton-proton collisions at s=13TeV

The double differential cross sections of the Drell-Yan lepton pair (ℓ + ℓ - , dielectron or dimuon) production are measured as functions of the invariant mass m ℓ ℓ , transverse momentum p T ( ℓ ℓ ) , and φ η ∗ . The φ η ∗ observable, derived from angular measurements of the leptons and highly correlated with p T ( ℓ ℓ ) , is used to probe the low-p T ( ℓ ℓ ) region in a complementary way. Dilepton masses up to 1Te V are investigated. Additionally, a measurement is performed requiring at least one jet in the final state. To benefit from partial cancellation of the systematic uncertainty, the ratios of the differential cross sections for various m ℓ ℓ ranges to those in the Z mass peak interval are presented. The collected data correspond to an integrated luminosity of 36.3fb - 1 of proton-proton collisions recorded with the CMS detector at the LHC at a centre-of-mass energy of 13Te V . Measurements are compared with predictions based on perturbative quantum chromodynamics, including soft-gluon resummation.

CMS pythia 8 colour reconnection tunes based on underlying-event data

New sets of parameter tunes for two of the colour reconnection models, quantum chromodynamics-inspired and gluon-move, implemented in the pythia  8 event generator, are obtained based on the default CMS pythia  8 underlying-event tune, CP5. Measurements sensitive to the underlying event performed by the CMS experiment at centre-of-mass energies s = 7 and 13Te V , and by the CDF experiment at 1.96Te V are used to constrain the parameters of colour reconnection models and multiple-parton interactions simultaneously. The new colour reconnection tunes are compared with various measurements at 1.96, 7, 8, and 13Te V including measurements of the underlying-event, strange-particle multiplicities, jet substructure observables, jet shapes, and colour flow in top quark pair (t t ¯ ) events. The new tunes are also used to estimate the uncertainty related to colour reconnection modelling in the top quark mass measurement using the decay products of t t ¯ events in the semileptonic channel at 13Te V .

Probing Heavy Majorana Neutrinos and the Weinberg Operator through Vector Boson Fusion Processes in Proton-Proton Collisions at sqrt[s]=13 TeV

The first search exploiting the vector boson fusion process to probe heavy Majorana neutrinos and the Weinberg operator at the LHC is presented. The search is performed in the same-sign dimuon final state using a proton-proton collision dataset recorded at sqrt[s]=13  TeV, collected with the CMS detector and corresponding to a total integrated luminosity of 138  fb^{-1}. The results are found to agree with the predictions of the standard model. For heavy Majorana neutrinos, constraints on the squared mixing element between the muon and the heavy neutrino are derived in the heavy neutrino mass range 50 GeV-25 TeV; for masses above 650 GeV these are the most stringent constraints from searches at the LHC to date. A first test of the Weinberg operator at colliders provides an observed upper limit at 95% confidence level on the effective μμ Majorana neutrino mass of 10.8 GeV.

Search for light Higgs bosons from supersymmetric cascade decays in pp collisions at s=13TeV

A search is reported for pairs of light Higgs bosons (H 1 ) produced in supersymmetric cascade decays in final states with small missing transverse momentum. A data set of LHC pp collisions collected with the CMS detector at s = 13 TeV and corresponding to an integrated luminosity of 138fb - 1 is used. The search targets events where both H 1 bosons decay into pairs that are reconstructed as large-radius jets using substructure techniques. No evidence is found for an excess of events beyond the background expectations of the standard model (SM). Results from the search are interpreted in the next-to-minimal supersymmetric extension of the SM, where a "singlino" of small mass leads to squark and gluino cascade decays that can predominantly end in a highly Lorentz-boosted singlet-like H 1 and a singlino-like neutralino of small transverse momentum. Upper limits are set on the product of the squark or gluino pair production cross section and the square of the branching fraction of the H 1 in a benchmark model containing almost mass-degenerate gluinos and light-flavour squarks. Under the assumption of an SM-like branching fraction, H 1 bosons with masses in the range 40-120GeV arising from the decays of squarks or gluinos with a mass of 1200-2500GeV are excluded at 95% confidence level.

Measurement of the differential tt¯ production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production (t t ¯ ) events, where the lepton is an electron or muon. The products of the hadronic top quark decay are reconstructed using a single large-radius jet with transverse momentum greater than 400Ge V . The data were collected with the CMS detector at the LHC in proton-proton collisions and correspond to an integrated luminosity of 138fb - 1 . The differential t t ¯ production cross section as a function of the jet mass is unfolded to the particle level and is used to extract the top quark mass. The jet mass scale is calibrated using the hadronic W boson decay within the large-radius jet. The uncertainties in the modelling of the final state radiation are reduced by studying angular correlations in the jet substructure. These developments lead to a significant increase in precision, and a top quark mass of 173.06 ± 0.84 Ge V .

[Long-term mortality risk of valvular heart disease adults over 35 years old in Chinese communities]

Objective: To investigate the risk and influencing factors of long-term mortality of valvular heart disease (VHD) adults aged 35 years and over in Chinese communities. Methods: A cohort study was carried out. The data of the subjects who underwent echocardiography were collected from the Chinese Hypertension Survey between 2012 and 2015 and survival outcomes were followed up between 2018 and 2019. Kaplan-Meier survival curves were plotted and compared using log-rank test. Cox proportional hazards models were used to analyze the influence of VHD on mortality. Results: During an average follow-up time of (4.6±0.9) years, a total of 23 237 participants (10 881 males and 12 356 females) were pooled into the final analysis from 5 eastern, 5 central, and 4 western provinces, cities and autonomous regions in China, with a mean age of (56.9±13.2) years. Among the included participants, 1 004 had VHD (467 males and 537 females), with a mean age was of (68.1±12.6) years. In the Kaplan-Meier analysis, participants with VHD had a significantly increased risk of all-cause mortality (log-rank χ²=351.82, P<0.001) and cardiovascular mortality (log-rank χ²=284.14, P<0.001) compared with those without VHD. Multivariate Cox regression analysis showed that compared with those without VHD, the participants with rheumatic VHD had a 45% increased risk of all-cause mortality (HR=1.45, 95%CI: 1.12-1.89) and degenerative VHD increased the risk of cardiovascular mortality by 69% (HR=1.69, 95%CI: 1.19-2.38). The risk factors of cardiovascular mortality for VHD were age 55 years and over (55-<75 years: HR=4.93, 95%CI: 1.17-20.85;≥75 years: HR=11.92, 95%CI: 2.85-49.80) and diabetes mellitus (HR=1.71, 95%CI: 1.00-2.93). Conclusions: VHD is a risk factor of all-cause mortality and cardiovascular mortality among adults aged 35 years and over. Age 55 years and over and diabetes mellitus are adverse prognostic factors for patients with VHD.

Predicting Drug Treatment Outcomes in Childrens with Tuberous Sclerosis Complex-Related Epilepsy: A Clinical Radiomics Study

BACKGROUND AND PURPOSE

Highly predictive markers of drug treatment outcomes of tuberous sclerosis complex-related epilepsy are a key unmet clinical need. The objective of this study was to identify meaningful clinical and radiomic predictors of outcomes of epilepsy drug treatment in patients with tuberous sclerosis complex.

MATERIALS AND METHODS

A total of 105 children with tuberous sclerosis complex-related epilepsy were enrolled in this retrospective study. The pretreatment baseline predictors that were used to predict drug treatment outcomes included patient demographic and clinical information, gene data, electroencephalogram data, and radiomic features that were extracted from pretreatment MR imaging scans. The Spearman correlation coefficient and least absolute shrinkage and selection operator were calculated to select the most relevant features for the drug treatment outcome to build a comprehensive model with radiomic and clinical features for clinical application.

RESULTS

Four MR imaging-based radiomic features and 5 key clinical features were selected to predict the drug treatment outcome. Good discriminative performances were achieved in testing cohorts (area under the curve = 0.85, accuracy = 80.0%, sensitivity = 0.75, and specificity = 0.83) for the epilepsy drug treatment outcome. The model of radiomic and clinical features resulted in favorable calibration curves in all cohorts.

CONCLUSIONS

Our results suggested that the radiomic and clinical features model may predict the epilepsy drug treatment outcome. Age of onset, infantile spasms, antiseizure medication numbers, epileptiform discharge in left parieto-occipital area of electroencephalography, and gene mutation type are the key clinical factors to predict the epilepsy drug treatment outcome. The texture and first-order statistic features are the most valuable radiomic features for predicting drug treatment outcomes.

Improved thermal stability of roselle anthocyanin by co-pigmented with oxalic acid: Preparation, characterization and enhancement mechanism

The enhancement effects of co-pigmentation on thermal stability of roselle anthocyanin extract (RAE) were investigated. The introduction of organic acids maintained color stability of RAE, and RAE co-pigmented with oxalic acid (OA) presented less color fading rates (19.46 ± 0.33 %) and higher redness (41.33 ± 3.51). Subsequently, suitable co-pigmentation concentration (OA:RAE = 1:2) was obtained regarding with lower ΔE (48.70 ± 2.36). Then, improvement behaviors of co-pigmentation on OA-RAE were evaluated. Results demonstrated that OA-RAE exhibited better thermal stability, as manifested by larger retention rates and more favorable thermal degradation kinetic parameters. Furthermore, both molecular docking simulation and experimental structural characterization revealed that hydrogen bonds and other non-covalent bonds made up the main parts of molecular interactions, leading to formation of stable binary complex. As a result, the aromatic ring of RAE was protected. In conclusion, the co-pigmentation of RAE via introduction of OA was effective in stability enhancement due to the generation of molecular bindings.