1
|
Biodiversity patterns of the coral reef cryptobiota around the Arabian Peninsula. Sci Rep 2024; 14:9532. [PMID: 38664507 PMCID: PMC11045746 DOI: 10.1038/s41598-024-60336-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/09/2024] [Accepted: 04/22/2024] [Indexed: 04/28/2024] Open
Abstract
The Arabian Peninsula accounts for approximately 6% of the world's coral reefs. Some thrive in extreme environments of temperature and salinity. Using 51 Autonomous Reef Monitoring Structure (ARMS), a standardized non-destructive monitoring device, we investigated the spatial patterns of coral reef cryptobenthic diversity in four ecoregions around the Arabian Peninsula and analyzed how geographical and/or environmental drivers shape those patterns. The mitochondrial cytochrome c oxidase subunit I (COI) gene was used to identify Amplicon Sequence Variants and assign taxonomy of the cryptobenthic organisms collected from the sessile and mobile fractions of each ARMS. Cryptobenthic communities sampled from the two ecoregions in the Red Sea showed to be more diverse than those inhabiting the Arabian (Persian) Gulf and the Gulf of Oman. Geographic distance revealed a stronger relationship with beta diversity in the Mantel partial correlation than environmental distance. However, the two mobile fractions (106-500 µm and 500-2000 µm) also had a significant correlation between environmental distance and beta diversity. In our study, dispersal limitations explained the beta diversity patterns in the selected reefs, supporting the neutral theory of ecology. Still, increasing differences in environmental variables (environmental filtering) also had an effect on the distribution patterns of assemblages inhabiting reefs within short geographic distances. The influence of geographical distance in the cryptofauna assemblages makes these relevant, yet usually ignored, communities in reef functioning vulnerable to large scale coastal development and should be considered in ecosystem management of such projects.
Collapse
|
2
|
Responses of the coral reef cryptobiome to environmental gradients in the Red Sea. PLoS One 2024; 19:e0301837. [PMID: 38626123 PMCID: PMC11020721 DOI: 10.1371/journal.pone.0301837] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Accepted: 03/24/2024] [Indexed: 04/18/2024] Open
Abstract
An essential component of the coral reef animal diversity is the species hidden in crevices within the reef matrix, referred to as the cryptobiome. These organisms play an important role in nutrient cycling and provide an abundant food source for higher trophic levels, yet they have been largely overlooked. Here, we analyzed the distribution patterns of the mobile cryptobiome (>2000 μm) along the latitudinal gradient of the Saudi Arabian coast of the Red Sea. Analysis was conducted based on 54 Autonomous Reef Monitoring Structures. We retrieved a total of 5273 organisms, from which 2583 DNA sequences from the mitochondrially encoded cytochrome c oxidase I were generated through sanger sequencing. We found that the cryptobiome community is variable over short geographical distances within the basin. Regression tree models identified sea surface temperature (SST), percentage cover of hard coral and turf algae as determinant for the number of operational taxonomic units present per Autonomous Reef Monitoring Structures (ARMS). Our results also show that the community structure of the cryptobiome is associated with the energy available (measured as photosynthetic active radiation), sea surface temperature, and nearby reef habitat characteristics (namely hard corals, turf and macroalgae). Given that temperature and reef benthic characteristics affect the cryptobiome, current scenarios of intensive climate change are likely to modify this fundamental biological component of coral reef functioning. However, the trajectory of change is unknow and can be site specific, as for example, diversity is expected to increase above SST of 28.5°C, and with decreasing hard coral and turf cover. This study provides a baseline of the cryptobenthic community prior to major coastal developments in the Red Sea to be used for future biodiversity studies and monitoring projects. It can also contribute to better understand patterns of reef biodiversity in a period where Marine Protected Areas are being discussed in the region.
Collapse
|
3
|
Enhancing CO and H 2 Production in Propane Dry Reforming in Excess of CO 2. ACS OMEGA 2024; 9:17646-17654. [PMID: 38645309 PMCID: PMC11024976 DOI: 10.1021/acsomega.4c01338] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/10/2024] [Revised: 03/16/2024] [Accepted: 03/20/2024] [Indexed: 04/23/2024]
Abstract
This study focuses on addressing the challenges in the dry reforming of propane, a process historically marked by low syngas yields and only moderate conversions of CO2 and propane. The primary objective was to enhance CO2 utilization and boost the selectivity of syngas (CO and H2) production using titania-based catalysts. For synthesizing these catalysts, an impregnation method was employed with subsequent characterization through X-ray diffraction (XRD), N2 adsorption-desorption, ammonia temperature-programmed desorption (TPD), and hydrogen temperature-programmed reduction (TPR). The titania-based catalysts generally possess weak acidic strength, with each catalyst displaying a unique reduction profile. The dry reforming process using these catalysts resulted in varying levels of propane conversion, with V/Ti, Ir/Ti, Al/Ti, and Zr/Ti catalysts showing distinct efficiencies. Notably, the Ir/Ti and V/Ti oxide catalysts achieved the lowest selectivity for generating intermediate byproducts such as methane, ethane, ethylene, and propylene while successfully promoting higher syngas CO and H2 production alongside stable propane conversion. When exposed to excess CO2, each catalyst consumed differing amounts of CO2 molecules. Particularly, the Ir/Ti and V/Ti oxide catalysts demonstrated enhanced activity in promoting CO2 reactions with intermediate radical species, facilitating carbon-carbon (C-C) bond dissociation and leading to increased syngas production. This study offers valuable insights into the potential of titania-based catalysts in improving the efficiency and selectivity of propane dry reforming processes for blue hydrogen.
Collapse
|
4
|
Skeletal CH 3OH/NO x Kinetic Model for Simulating Spark-Ignition and Turbulent Jet Ignition Engines. ACS OMEGA 2024; 9:11255-11265. [PMID: 38496931 PMCID: PMC10938324 DOI: 10.1021/acsomega.3c06488] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 02/02/2024] [Accepted: 02/02/2024] [Indexed: 03/19/2024]
Abstract
Methanol is a promising renewable fuel for achieving a better engine combustion efficiency and lower exhaust emissions. Under exhaust gas recirculation conditions, trace amounts of nitrogen oxides have been shown to participate in fuel oxidation and impact the ignition characteristics significantly. Despite numerous studies that analyzed the methanol/NOx interaction, no reliable skeletal kinetic mechanism is available for computational fluid dynamics (CFD) modeling. This work focuses on developing a skeletal CH3OH/NOx kinetic model consisting of 25 species and 55 irreversible and 27 reversible reactions, used for full-cycle engine combustion simulations. New experiments of methanol with the presence of 200 ppmv NO/NO2 were conducted in a rapid compression machine (RCM) at engine-relevant conditions (20-30 bar, 850-950 K). Experimental results indicate notable enhancement effects of the presence of NO/NO2 on methanol ignition under the conditions tested, which highlights the importance of including the CH3OH/NOx interactions in predicting combustion performance. The proposed skeletal mechanism was validated against the literature and new methanol and methanol/NOx experiments over a wide range of operating conditions. Furthermore, the skeletal mechanism was applied in three-dimensional (3D) CFD full-cycle simulations of spark-ignition (SI) and turbulent jet ignition (TJI) engine combustion using methanol. Simulation results demonstrate good agreement with experimental measurements of pressure traces and engine metrics, proving that the proposed skeletal mechanism is suitable and sufficient for CFD simulations.
Collapse
|
5
|
Retarding Ion Migration for Stable Blade-Coated Inverted Perovskite Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2306466. [PMID: 37914391 DOI: 10.1002/adma.202306466] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2023] [Revised: 10/18/2023] [Indexed: 11/03/2023]
Abstract
The fabrication of perovskite solar cells (PSCs) through blade coating is seen as one of the most viable paths toward commercialization. However, relative to the less scalable spin coating method, the blade coating process often results in more defective perovskite films with lower grain uniformity. Ion migration, facilitated by those elevated defect levels, is one of the main triggers of phase segregation and device instability. Here, a bifunctional molecule, p-aminobenzoic acid (PABA), which enhances the barrier to ion migration, induces grain growth along the (100) facet, and promotes the formation of homogeneous perovskite films with fewer defects, is reported. As a result, PSCs with PABA achieved impressive power conversion efficiencies (PCEs) of 23.32% and 22.23% for devices with active areas of 0.1 cm2 and 1 cm2 , respectively. Furthermore, these devices maintain 93.8% of their initial efficiencies after 1 000 h under 1-sun illumination, 75 °C, and 10% relative humidity conditions.
Collapse
|
6
|
Optimizing jet pump efficiency via drag reducing polymers and enhanced efficiency definitions. Sci Rep 2024; 14:3821. [PMID: 38360843 DOI: 10.1038/s41598-024-54454-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2023] [Accepted: 02/13/2024] [Indexed: 02/17/2024] Open
Abstract
Liquid jet pumps are widely used in various industrial applications for fluid mixing, circulation, and transport. The efficiency and performance of liquid jet pumps play a crucial role in determining their overall effectiveness and economic viability. The performance of liquid jet pumps is primarily affected by parameters such as motive fluid pressure, nozzle design, and entrainment ratio. Liquid jet pumps exhibit a notable drawback in terms of comparatively lower efficiency when compared to alternative pump types. The reduced overall efficiency of liquid jet pumps stems primarily from energy dissipation incurred during the entrainment process. To address this obstacle, a water-water loop system was implemented in conjunction with a liquid jet pump, followed by the introduction of drag-reducing polymers (DRPs) into the suction flow of the liquid jet pump using a specific configuration. This configuration led to a significant reduction in drag within the liquid jet pump, raising its efficiency in some cases from 13.8% to 26.7% with a drag reduction of 46%, subsequently improving its overall performance. The resulting enhancement was evaluated using various efficiency models documented in the existing literature to comprehensively assess the overall performance of the liquid jet pump. A new interpretation of jet pump efficiency has been shared, along with a comparison of the various efficiencies.
Collapse
|
7
|
Post-Synthetic Ensembling Design of Hierarchically Ordered FAU-type Zeolite Frameworks for Vacuum Gas Oil Hydrocracking. Angew Chem Int Ed Engl 2024; 63:e202314217. [PMID: 37844013 DOI: 10.1002/anie.202314217] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2023] [Revised: 10/15/2023] [Accepted: 10/16/2023] [Indexed: 10/18/2023]
Abstract
Zeolites hold importance as catalysts and membranes across numerous industrial processes that produce most of the world's fuels and chemicals. In zeolite catalysis, the rate of molecular diffusion inside the micropore channels defines the catalyst's longevity and selectivity, thereby influencing the catalytic efficiency. Decreasing the diffusion pathlengths of zeolites to the nanoscopic level by fabricating well-organized hierarchically porous architecture can efficiently overcome their intrinsic mass-transfer limitations without losing hydrothermal stability. We report a rational post-synthetic design for synthesizing hierarchically ordered FAU-type zeolites exhibiting 2D-hexagonal (P6mm) and 3D-cubic (Ia3 ‾ ${\bar{3}}$ d) mesopore channels. The synthesis involves methodical incision of the parent zeolite into unit-cell level zeolitic fragments by in situ generated base and bulky surfactants. The micellar ensembles formed by these surfactant-zeolite interactions are subsequently reorganized into various ordered mesophases by tuning the micellar curvature with ion-specific interactions (Hofmeister effect). Unlike conventional crystallization, which offers poor control over mesophase formation due to kinetic constraints, crystalline mesostructures can be developed under dilute, mild alkaline conditions by controlled reassembly. The prepared zeolites with nanometric diffusion pathlengths have demonstrated excellent yields of naphtha and middle-distillates in vacuum gas oil hydrocracking with decreased coke deposition.
Collapse
|
8
|
Effect of Feature Shape and Dimension of a Confinement Geometry on Selectivity of Electrocatalytic CO 2 Reduction. Angew Chem Int Ed Engl 2024; 63:e202316264. [PMID: 37983973 DOI: 10.1002/anie.202316264] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Revised: 11/17/2023] [Accepted: 11/20/2023] [Indexed: 11/22/2023]
Abstract
The local confinement effect, which can generate a high concentration of hydroxide ions and reaction intermediates near the catalyst surface, is an important strategy for converting CO2 into multi-carbon products in electrocatalytic CO2 reduction. Therefore, understanding how the shape and dimension of the confinement geometry affect the product selectivity is crucial. In this study, we report for the first time the effect of the shape (degree of confinement) and dimension of the confined space on the product selectivity without changing the intrinsic property of Cu. We demonstrate that geometry influences the outcomes of products, such as CH4 , C2 H4 , and EtOH, in different ways: the selectivity of CH4 and EtOH is affected by shape, while the selectivity of C2 H4 is influenced by dimension of geometry predominantly. These phenomena are demonstrated, both experimentally and through simulation, to be induced by the local confinement effect within the confined structure. Our geometry model could serve as basis for designing the confined structures tailored for the production of specific products.
Collapse
|
9
|
Synthesis of Clean Hydrogen Gas from Waste Plastic at Zero Net Cost. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2306763. [PMID: 37694496 DOI: 10.1002/adma.202306763] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Revised: 08/24/2023] [Indexed: 09/12/2023]
Abstract
Hydrogen gas (H2 ) is the primary storable fuel for pollution-free energy production, with over 90 million tonnes used globally per year. More than 95% of H2 is synthesized through metal-catalyzed steam methane reforming that produces 11 tonnes of carbon dioxide (CO2 ) per tonne H2 . "Green H2 " from water electrolysis using renewable energy evolves no CO2 , but costs 2-3× more, making it presently economically unviable. Here catalyst-free conversion of waste plastic into clean H2 along with high purity graphene is reported. The scalable procedure evolves no CO2 when deconstructing polyolefins and produces H2 in purities up to 94% at high mass yields. The sale of graphene byproduct at just 5% of its current value yields H2 production at a negative cost. Life-cycle assessment demonstrates a 39-84% reduction in emissions compared to other H2 production methods, suggesting the flash H2 process to be an economically viable, clean H2 production route.
Collapse
|
10
|
Flexible and Freestanding MoS 2/Graphene Composite for High-Performance Supercapacitors. ACS OMEGA 2023; 8:36789-36800. [PMID: 37841111 PMCID: PMC10568709 DOI: 10.1021/acsomega.3c03370] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Accepted: 09/21/2023] [Indexed: 10/17/2023]
Abstract
Two-dimensional atomically thick materials such as graphene and layered molybdenum disulfide (MoS2) have been studied as potential energy storage materials because of their high specific surface area, potential redox activity, and mechanical flexibility. However, because of the layered structure restacking and poor electrical conductivity, these materials are unable to attain their full potential. Composite electrodes made of a mixture of graphene and MoS2 have been shown to partially resolve these issues in the past, although their performance is still limited by inadequate mixing at the nanoscale. Herein, we report three composites via a simple ball-milling method and analyze supercapacitor electrodes. Compared with pristine graphene and MoS2, the composites showed high capacitance. The as-obtained MoS2@Graphene composite (1:9) possesses a high surface area and uniform dispersion of MoS2 on the graphene sheet. The MoS2@Graphene (1:9) composite electrode has a high specific capacitance of 248 F g-1 at 5 A g-1 in an electrochemical supercapacitor compared with the other two composites. Simultaneously, the flexible symmetric supercapacitor device prepared demonstrated superior flexibility and a long lifespan (93% capacitance retention after 8000 cycles) with no obvious changes in performance under different angles. In portable and wearable energy storage devices, the current experimental results will result in scalable, freestanding hybrid electrodes with improved, flexible, supercapacitive performance.
Collapse
|
11
|
A Molecular Dynamics Study of Single-Gas and Mixed-Gas N 2 and CH 4 Transport in Triptycene-Based Polyimide Membranes. Polymers (Basel) 2023; 15:3811. [PMID: 37765665 PMCID: PMC10535442 DOI: 10.3390/polym15183811] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 09/04/2023] [Accepted: 09/13/2023] [Indexed: 09/29/2023] Open
Abstract
Fluorinated polyimides incorporated with triptycene units have gained growing attention over the last decade since they present potentially interesting selectivities and a higher free volume with respect to their triptycene-free counterparts. This work examines the transport of single-gas and mixed-gas N2 and CH4 in the triptycene-based 6FDA-BAPT homopolyimide and in a block 15,000 g mol-1/15,000 g mol-1 6FDA-mPDA/BAPT copolyimide by using molecular dynamics (MD) simulations. The void-space analyses reveal that, while the free volume consists of small-to-medium holes in the 6FDA-BAPT homopolyimide, there are more medium-to-large holes in the 6FDA-mPDA/BAPT copolyimide. The single-gas sorption isotherms for N2 and CH4 over the 0-70 bar range at 338.5 K show that both gases are more soluble in the block copolyimide, with a higher affinity for methane. CH4 favours sites with the most favourable energetic interactions, while N2 probes more sites in the matrices. The volume swellings remain limited since neither N2 nor CH4 plasticise penetrants. The transport of a binary-gas 2:1 CH4/N2 mixture is also examined in both polyimides under operating conditions similar to those used in current natural gas processing, i.e., at 65.5 bar and 338.5 K. In the mixed-gas simulations, the solubility selectivities in favour of CH4 are enhanced similarly in both matrices. Although diffusion is higher in 6FDA-BAPT/6FDA-mPDA, the diffusion selectivities are also close. Both triptycene-based polyimides under study favour, to a similar extent, the transport of methane over that of nitrogen under the conditions studied.
Collapse
|
12
|
Unveiling meta-Alkyloxy/-Silyloxy-Substituted N-Aryl PNP Ligands for Efficient Cr-Catalyzed Ethylene Tetramerization. ACS OMEGA 2023; 8:26437-26443. [PMID: 37521606 PMCID: PMC10373192 DOI: 10.1021/acsomega.3c03029] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/03/2023] [Accepted: 07/05/2023] [Indexed: 08/01/2023]
Abstract
Novel N-aryl-functionalized PNP ligands (1-4) bearing m-alkyloxy/-silyloxy substituents were prepared and evaluated for chromium-catalyzed ethylene oligomerization using MMAO-3A as an activator. The selected Cr/PNP system under optimized condition exhibited high 1-octene-selective (up to 70 wt %) ethylene tetramerization at a remarkable rate (over 3000 kg gCr-1 h-1). More importantly, the undesirable polyethylene selectivity was restricted to a minimum level of ∼1-2 wt % for pre-catalysts derived with ligands 1 and 2. Employing chlorobenzene as a reaction medium yielded best productivity in conjunction to the total α-olefin (1-C6 + 1-C8) selectivity (∼88 wt %). N-aryl PNP ligands (3 and 4) incorporating m-silyloxy substituents in the phenyl ring exhibited relatively poorer tetramerization performance while yielding higher PE fraction as compared to their m-alkyloxy derivatives. A detailed molecular structure of the best-performing pre-catalyst 1-Cr was established by single-crystal X-ray diffraction analysis. The stability of 1/Cr-based catalyst system was investigated for a reaction time of up to 2 h under optimized condition.
Collapse
|
13
|
Nanocomposite of CO 2-Based Polycarbonate Polyol with Highly Exfoliated Nanoclay. ACS OMEGA 2023; 8:5247-5256. [PMID: 36816631 PMCID: PMC9933217 DOI: 10.1021/acsomega.2c05705] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/02/2022] [Accepted: 12/07/2022] [Indexed: 06/18/2023]
Abstract
Polypropylene carbonate (PPC) derived from carbon dioxide has been used as a precursor for the synthesis of polyurethane (PU). The high viscosity of the PPC is the key parameter hindering its processability during PU synthesis. Herein, a PPC nanocomposite with highly exfoliated nanoclay was prepared through a solution intercalation process. A wide range of nanoclay concentrations incorporated into the PPC were studied. The impacts of the nanoclay on the PPC were investigated in order to maintain the polymer structure while improving its physical properties. The characterizations of PPC nanocomposites showed that the highly exfoliated nanoclay contributed to a viscosity reduction, and a slight reduction in the molecular weight. The polymer degradation was indicated by the formation of cyclic propylene carbonate. The minimum or critical concentration of nanoclay was found to be between ∼0.5 and 2.0 wt %. Within this range, the polymer degradation is minimal. The PPC nanocomposites with a lower viscosity showed excellent precursors for making PU coating materials. The PU coating derived from the PPC nanocomposite has higher anticorrosive properties in comparison with the non-modified PU coating.
Collapse
|
14
|
Improvements in the stability of biodiesel fuels: recent progress and challenges. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:14104-14125. [PMID: 36585583 PMCID: PMC9803405 DOI: 10.1007/s11356-022-25048-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/14/2022] [Accepted: 12/26/2022] [Indexed: 06/17/2023]
Abstract
Fewer fossil fuel deposits, price volatility, and environmental concerns have intensified biofuel-based studies. Saccharification, gasification, and pyrolysis are some of the potential methods of producing carbohydrate-based fuels, while lipid extraction is the preferred method of producing biodiesel and green diesel. Over the years, multiple studies have attempted to identify an ideal catalyst as well as optimize the abovementioned methods to produce higher yields at a lower cost. Therefore, this present study comprehensively examined the factors affecting biodiesel stability. Firstly, isomerization, which is typically used to reduce unsaturated fatty acid content, was found to improve oxidative stability as well as maintain and improve cold flow properties. Meanwhile, polymers, surfactants, or small molecules with low melting points were found to improve the cold flow properties of biodiesel. Meanwhile, transesterification with an enzyme could be used to remove monoacylglycerols from oil feedstock. Furthermore, combining two natural antioxidants could potentially slow lipid oxidation if stainless steel, carbon steel, or aluminum are used as biodiesel storage materials. This present review also recommends combining green diesel and biodiesel to improve stability. Furthermore, green diesel can be co-produced at oil refineries that are more selective and have a limited supply of hydrogen. Lastly, next-generation farming should be examined to avoid competing interests in food and energy as well as to improve agricultural efficiency.
Collapse
|
15
|
Optimization and Uncertainty Quantification Method for Reservoir Stimulation through Carbonate Acidizing. ACS OMEGA 2023; 8:539-554. [PMID: 36643422 PMCID: PMC9835652 DOI: 10.1021/acsomega.2c05564] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Accepted: 11/29/2022] [Indexed: 06/17/2023]
Abstract
Reservoir stimulation is a widely used technique in the oil and gas industry for increasing the productivity of hydrocarbon reservoirs, most notably in carbonate formations. This work aims to develop an optimization workflow under uncertainty for matrix acidizing. A reactive transport model is implemented in a finite-element framework to simulate the initiation and propagation of dissolution channels in porous carbonate rock. The model is verified using an analytical solution. We utilize surrogate modeling based on polynomial chaos expansion (PCE) and Sobol indices to identify the most significant parameters. We investigate the effect of varying 12 identified parameters on the efficiency of the stimulation process using dimensionless groups, including the Damköhler, Peclet, and acid capacity numbers. Furthermore, the surrogate model reproduces the physics-based results accurately, including the dissolution channels, the pore volume to breakthrough, and the effective permeability of the stimulated rock. The developed workflow assesses how uncertainties propagate to the model's response, where the surrogate model is used to calculate the univariate effect. The global sensitivity analysis shows that the acid capacity number is the most significant parameter for the pore volume to breakthrough with the highest Sobol index. The marginal effect calculated for the individual parameter confirms the results from Sobol indices. This work provides a systematic workflow for uncertainty analysis and optimization applied to the processes of rock stimulation. Characterizing the impact of uncertainty provides physical insights and a better understanding of the matrix acidizing process.
Collapse
|
16
|
Steam Catalytic Cracking of n-Dodecane to Light Olefins over Phosphorous- and Metal-Modified Nanozeolite Y. ACS OMEGA 2022; 7:30807-30815. [PMID: 36092580 PMCID: PMC9453789 DOI: 10.1021/acsomega.2c02119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Accepted: 08/12/2022] [Indexed: 06/15/2023]
Abstract
Nanozeolite Y was synthesized without a template and modified with phosphorous (P) and metals. P was introduced via impregnation with different weight loadings (0.5, 1, and 2 wt %), while ion exchange was developed to introduce zirconium (Zr) and cobalt (Co). The physicochemical properties of the catalysts were characterized with X-ray diffraction (XRD), N2 adsorption-desorption, temperature-programmed desorption of ammonia (NH3-TPD), and 27Al and 31P solid-state nuclear magnetic resonance (NMR). The parent nanozeolite Y showed an identical XRD pattern to that of a previous study, and the modified nanozeolite Y showed a lower crystallinity. The introduction of P altered tetrahedral Al to an octahedral coordination, which affected the catalyst acidity. Then, the catalyst was evaluated to produce olefins from n-dodecane at 550, 575, and 600 °C. The conversion, gas yield, and olefin yield increased with increasing temperature. The maximum olefin yield (63%) was achieved with the introduction of 1 wt % P with the highest selectivity to ethylene. The Co-modified nanozeolite altered the zeolite structure and exhibited similar activity to the P-modified one. Meanwhile, Zr-modified nanozeolite Y caused excessive metal distribution, blocked the porous structure of the zeolite, and then reduced the catalytic activity.
Collapse
|
17
|
Highly Efficient Ethylene Tetramerization Using Cr Catalysts Constructed with Trifluoromethyl-Substituted N-Aryl PNP Ligands. ACS OMEGA 2022; 7:16333-16340. [PMID: 35601288 PMCID: PMC9118391 DOI: 10.1021/acsomega.1c06657] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2021] [Accepted: 04/21/2022] [Indexed: 06/01/2023]
Abstract
Tetramerization of ethylene by chromium catalysts stabilized with functionalized N-aryl phosphineamine ligands C6H4(m-CF3)N(PPh2)2 (1), C6H4(p-CF3)N(PPh2)2 (2), C6H4(o-CF3)N=PPh2-PPh2 (3), and C6H3(3,5-bis(CF3))N(PPh2)2 (4) was evaluated. The parameter optimization includes temperature, co-catalyst, and solvent. Upon activation with MMAO-3A, the new catalyst system especially with m-functional PNP ligand (1) exhibited high 1-octene selectivity and productivity while giving minimum undesirable polyethylene and C10 + olefin by-products. Using PhCl as a solvent at 75 °C led to a remarkable α-olefin (1-C6 + 1-C8) selectivity (>90 wt %) at a reaction rate of 2000 kg·gCr -1·h-1. Under identical conditions, analogous PNP ligands bearing -CH3, -Et, and -Cl functional moieties at the meta position of the N-phenyl ring displayed significantly lower reactivity. The catalyst with p-functional ligand (2) exhibited lower activity and comparable selectivities, while the Cr/PPN (with ligand 3) system gave no noticeable reactivity. The molecular structure of the precatalyst (1-Cr), exhibiting a monomeric structural feature, was elucidated with the aid of single-crystal X-ray diffraction study.
Collapse
|
18
|
Catalytic Cracking of n-Dodecane to Chemicals: Effect of Variable-Morphological ZSM-5 Zeolites Synthesized Using Various Silica Sources. ACS OMEGA 2022; 7:10317-10329. [PMID: 35382321 PMCID: PMC8973090 DOI: 10.1021/acsomega.1c06882] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/09/2021] [Accepted: 03/03/2022] [Indexed: 05/17/2023]
Abstract
This study emphasizes tuning the synthesis conditions of MFI zeolites to achieve better catalytic properties by optimizing the mesoporosity, the balance between Brønsted and Lewis sites, and the zeolite particle sizes. The MFI zeolites were hydrothermally synthesized at various temperatures employing different silica sources. The synthesis temperature was varied between 110 to 180 °C at constant synthesis time (15 h). Different silicon sources led to variations in structure, morphology, and size of the MFI zeolite along with tuned Lewis and Brønsted acid sites in parallel correlation with shape selectivity of the reaction. The catalytic activities of synthesized zeolites were investigated in the catalytic cracking of n-dodecane to produce value-added chemicals. The zeolite synthesized at 180 °C using fumed silica presented the highest catalytic conversion (96.6%), while maximum light olefin gaseous products (73.1%) were obtained for the sample synthesized at 140 °C using tetraethyl orthosilicate as the silica source. The MFI zeolite synthesized at 180 °C employing tetraethyl orthosilicate as a silica source facilitated the formation of both naphthenes and aromatics (71.3%) as major liquid products.
Collapse
|
19
|
Monomolecular Cracking of Propane: Effect of Zeolite Confinement and Acidity. ACS OMEGA 2022; 7:7531-7540. [PMID: 35284742 PMCID: PMC8908521 DOI: 10.1021/acsomega.1c05532] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/05/2021] [Accepted: 01/17/2022] [Indexed: 06/14/2023]
Abstract
The effect of zeolite pore geometry and intrinsic acidity on the activation energy of propane monomolecular cracking was investigated for six topologically distinct zeolites with different pore sizes. Periodic density functional theory calculations were used to calculate the activation energy, while cluster models were used to calculate deprotonation energies. The computed intrinsic activation energies showed a smaller variation with topology than the adsorption energies. No correlation was found between the computed deprotonation and ammonia adsorption energies at the acid site and the intrinsic activation energy. Detailed analysis of the computed structures and properties suggests that acid sites with different pore topologies impose geometrical constraints on the ion-pair formed by the ammonium molecule, which differs significantly from those that affect the propane reaction.
Collapse
|
20
|
Application of a Pickering Emulsified Polymeric Gel System as a Water Blocking Agent. ACS OMEGA 2021; 6:30919-30931. [PMID: 34841135 PMCID: PMC8613817 DOI: 10.1021/acsomega.1c02956] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/16/2021] [Accepted: 10/20/2021] [Indexed: 06/13/2023]
Abstract
The conventional methods for controlling excess water production in oil/gas wells can be classified on the basis of the mechanism (pore-blocking mechanism and relative permeability modification) used. Gel systems developed on the basis of a pore-blocking mechanism completely block the pores and stop the flow of both oil and water, whereas a relative permeability modifier (RPM) only restricts the flow of a single phase of the fluid. The gel working on the basis of the pore-blocking mechanism is known as a total blocking gel. An invert emulsified (PAM-PEI) polymer gel is a relative permeability modifier system. The same invert emulsion system is tested as a total blocking gel system in this research work. The dual-injection technique (1st injection and 2nd injection) was used for this purpose. In this research work, the emulsion system was tested at a temperature of 105 °C. The core sections with drilled holes and fractures were used for the core flooding experiments, representing a highly fractured reservoir. The developed emulsified gel system was characterized using a dilution test, an inverted bottle test, microscopic images, and FTIR images. The emulsified polymer gel was tested using a core flooding experiment. After the 2nd injection, the postflood medical CT and micro-CT images of the core sections clearly showed the presence of two different phases in the core section, i.e., the oil phase and the gel phase. The core flooding experiment result indicates that the gel formed after the 2nd injection of the emulsion system can withstand a very high differential pressure, i.e., above 2000 psi. The gel did not allow any oil or water to be produced. Hence, the developed emulsified polymer gel system with the help of a dual-injection technique can be efficiently used as a total blocking gel for high-temperature reservoirs.
Collapse
|
21
|
Controlled Synthesis of Metal-Organic Frameworks in Scalable Open-Porous Contactor for Maximizing Carbon Capture Efficiency. JACS AU 2021; 1:1198-1207. [PMID: 34467358 PMCID: PMC8397359 DOI: 10.1021/jacsau.1c00068] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/16/2021] [Indexed: 06/13/2023]
Abstract
Metal-organic frameworks (MOFs) are a class of microporous materials that have been highlighted with fast and selective sorption of gas molecules; however, they are at least partially unstable in the scale-up process. Here, we report a rational shaping of MOFs in a scalable architecture of fiber sorbent. The long-standing stability challenge of MOFs was resolved by using stable metal oxide precursors that are subject to controlled surface oxide dissolution-growth chemistry during the Mg-based MOF synthesis. Highly uniform MOF crystals are synthesized along with the open-porous fiber sorbents networks, showing unprecedented cyclic CO2 capacities in both flue gas and direct air capture (DAC) conditions. The same chemistry enables an in situ flow synthesis of Mg-MOF fiber sorbents, providing a scalable pathway for MOF synthesis in an inert condition with minimal handling steps. This modular approach can serve both as a reaction stage for enhanced MOF fiber sorbent synthesis and as a "process-ready" separation device.
Collapse
|
22
|
Two dimensional (2D) reduced graphene oxide (RGO)/hexagonal boron nitride (h-BN) based nanocomposites as anodes for high temperature rechargeable lithium-ion batteries. Sci Rep 2020; 10:1882. [PMID: 32024851 PMCID: PMC7002573 DOI: 10.1038/s41598-020-58439-z] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2019] [Accepted: 11/05/2019] [Indexed: 11/16/2022] Open
Abstract
With lithium-ion (li-ion) batteries as energy storage devices, operational safety from thermal runaway remains a major obstacle especially for applications in harsh environments such as in the oil industry. In this approach, a facile method via microwave irradiation technique (MWI) was followed to prepare Co3O4/reduced graphene oxide (RGO)/hexagonal boron nitride (h-BN) nanocomposites as anodes for high temperature li-ion batteries. Results showed that the addition of h-BN not only enhanced the thermal stability of Co3O4/RGO nanocomposites but also enhanced the specific surface area. Co3O4/RGO/h-BN nanocomposites displayed the highest specific surface area of 191 m2/g evidencing the synergistic effects between RGO and h-BN. Moreover, Co3O4/RGO/h-BN also displayed the highest specific capacity with stable reversibility on the high performance after 100 cycles and lower internal resistance. Interestingly, this novel nanocomposite exhibits outstanding high temperature performances with excellent cycling stability (100% capacity retention) and a decreased internal resistance at 150 °C.
Collapse
|
23
|
Long-range, selective, on-demand suspension interactions: Combining and triggering soluto-inertial beacons. SCIENCE ADVANCES 2019; 5:eaax1893. [PMID: 31453339 PMCID: PMC6697437 DOI: 10.1126/sciadv.aax1893] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2019] [Accepted: 07/10/2019] [Indexed: 05/08/2023]
Abstract
Structures and particles that slowly release solute into solution can attract or repel other particles in suspension via diffusiophoresis, a process we termed "soluto-inertial (SI) interactions." These SI interactions involve "beacons" that establish and sustain nonequilibrium solute fluxes over long durations. Here, we demonstrate the versatility of the SI concept and introduce distinct strategies to manipulate solute gradients and, hence, suspension behavior using beacons with different physicochemical properties. First, we demonstrate on-demand particle migration using beacons that can be actuated with a trigger. We then show the synergy between multiple, distinct beacons that modify solute fluxes in a way that allows directed, yet selective, colloidal migration to specific target sites. Moreover, this multibeacon harmony enhances migration velocities, and delays the equilibration of the SI effect. The different SI techniques highlighted here suggest previously unidentified possibilities for sorting and separating colloidal mixtures, targeting particle delivery, and enhancing rates of suspension flocculation.
Collapse
|
24
|
Powering sustainable development within planetary boundaries. ENERGY & ENVIRONMENTAL SCIENCE 2019; 12:1890-1900. [PMID: 31303892 PMCID: PMC6592157 DOI: 10.1039/c8ee03423k] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2018] [Revised: 11/19/2019] [Accepted: 01/21/2019] [Indexed: 05/23/2023]
Abstract
The concept of planetary boundaries identifies a safe space for humanity. Current energy systems are primarily designed with a focus on total cost minimization and bounds on greenhouse gas emissions. Omitting planetary boundaries in energy systems design can lead to energy mixes unable to power our sustainable development. To overcome this conceptual limitation, we here incorporate planetary boundaries into energy systems models, explicitly linking energy generation with the Earth's ecological limits. Taking the United States as a testbed, we found that the least cost energy mix that would meet the Paris Agreement 2 degrees Celsius target still transgresses five out of eight planetary boundaries. It is possible to meet seven out of eight planetary boundaries concurrently by incurring a doubling of the cost compared to the least cost energy mix solution (1.3% of the United States gross domestic product in 2017). Due to the stringent downscaled planetary boundary on biogeochemical nitrogen flow, there is no energy mix in the United States capable of satisfying all planetary boundaries concurrently. Our work highlights the importance of considering planetary boundaries in energy systems design and paves the way for further research on how to effectively accomplish such integration in energy related studies.
Collapse
|
25
|
Rapid Red Sea Deep Water renewals caused by volcanic eruptions and the North Atlantic Oscillation. SCIENCE ADVANCES 2018; 4:eaar5637. [PMID: 29963625 PMCID: PMC6021143 DOI: 10.1126/sciadv.aar5637] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/09/2018] [Accepted: 05/22/2018] [Indexed: 06/08/2023]
Abstract
The Red Sea hosts a deep marine environment unique among the world's oceans. It is occupied, almost homogeneously from the subsurface (~137 to 300 m) to depths over 2000 m, by a warm (~21.5°C) and highly saline (~40.5) water mass, referred to as the Red Sea Deep Water (RSDW). Previous studies suggested that the RSDW is mainly ventilated, continuously or intermittently, by dense outflows from the northern Gulfs of Suez and Aqaba with a resulting sluggish renewal time on the order of 36 to 90 years. We use six repeated hydrographic observations spanning the period 1982-2011 and simulations of an ocean general circulation model with realistic atmospheric forcing to show that large portions of the RSDW were episodically replaced during 1982-2001 by new dense waters mainly formed by open-ocean deep convections in the northern Red Sea during anomalously cold winters, pointing to a much shorter renewal time for the RSDW on the order of a decade. We further show that the winter cooling anomaly in the Red Sea region was a part of a large-scale climate variability pattern associated with either large volcanic eruptions or the North Atlantic Oscillation (NAO). Consequently, significant deep water formation events occurred in the Red Sea in the winters following the 1982 El Chichón eruption in Mexico and the 1991 Mount Pinatubo eruption in the Philippines and during the strong positive phase of the NAO in the winter of 1989.
Collapse
|
26
|
Enhancement of Microbial Biodesulfurization via Genetic Engineering and Adaptive Evolution. PLoS One 2017; 12:e0168833. [PMID: 28060828 PMCID: PMC5218467 DOI: 10.1371/journal.pone.0168833] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2016] [Accepted: 12/07/2016] [Indexed: 11/19/2022] Open
Abstract
In previous work from our laboratories a synthetic gene encoding a peptide (“Sulpeptide 1” or “S1”) with a high proportion of methionine and cysteine residues had been designed to act as a sulfur sink and was inserted into the dsz (desulfurization) operon of Rhodococcus erythropolis IGTS8. In the work described here this construct (dszAS1BC) and the intact dsz operon (dszABC) cloned into vector pRESX under control of the (Rhodococcus) kstD promoter were transformed into the desulfurization-negative strain CW25 of Rhodococcus qingshengii. The resulting strains (CW25[pRESX-dszABC] and CW25[pRESX-dszAS1BC]) were subjected to adaptive selection by repeated passages at log phase (up to 100 times) in minimal medium with dibenzothiophene (DBT) as sole sulfur source. For both strains DBT metabolism peaked early in the selection process and then decreased, eventually averaging four times that of the initial transformed cells; the maximum specific activity achieved by CW25[pRESX-dszAS1BC] exceeded that of CW25[pRESX-dszABC]. Growth rates increased by 7-fold (CW25[pRESX-dszABC]) and 13-fold (CW25[pRESX-dszAS1BC]) and these increases were stable. The adaptations of CW25[pRESX-dszAS1BC] were correlated with a 3-5X increase in plasmid copy numbers from those of the initial transformed cells; whole genome sequencing indicated that during its selection processes no mutations occurred to any of the dsz, S1, or other genes and promoters involved in sulfur metabolism, stress response, or DNA methylation, and that the effect of the sulfur sink produced by S1 is likely very small compared to the cells’ overall cysteine and methionine requirements. Nevertheless, a combination of genetic engineering using sulfur sinks and increasing Dsz capability with adaptive selection may be a viable strategy to increase biodesulfurization ability.
Collapse
|