Moxifloxacin-loaded nanoparticles of thiolated xyloglucan for ocular drug delivery: Permeation, mucoadhesion and pharmacokinetic evaluation

The current study goal was to improve mucoadhesive potential and ocular pharmacokinetics of nanoparticles of thiolated xyloglucan (TXGN) containing moxifloxacin (MXF). Thiolation of xyloglucan (XGN) was achieved with esterification with 3-mercaptopropionic acid. TXGN was characterized by NMR and FTIR analysis. The nanoparticles of TXGN were prepared using ionic-gelation method and evaluate the antibacterial properties. TXGN and nanoparticles were determined to possess 0.06 and 0.08 mmol of thiol groups/mg of polymer by Ellman's method. The ex-vivo bioadhesion time of TXGN and nanoparticles was higher than XGN in a comparative assessment of their mucoadhesive properties. The creation of a disulfide link between mucus and TXGN is responsible for the enhanced mucoadhesive properties of TXGN (1-fold) and nanoparticles (2-fold) over XGN. Improved MXF penetration in nanoparticulate formulation (80 %) based on TXGN was demonstrated in an ex-vivo permeation research utilizing rabbit cornea. Dissolution study showed 95 % release of MXF from nanoparticles. SEM images of nanoparticles showed spherical shape and cell viability assay showed nontoxic behavior when tested on RPE cell line. Antibacterial analysis revealed a zone of inhibition of 31.5 ± 0.5 mm for MXF, while NXM3 exhibited an expanded zone of 35.5 ± 0.4 mm (p < 0.001). In conclusion, thiolation of XGN improves its bioadhesion, permeation, ocular-retention and pharmacokinetics of MXF.

BnXTH1 regulates cadmium tolerance by modulating vacuolar compartmentalization and the cadmium binding capacity of cell walls in ramie (Boehmeria nivea)

Xyloglucan endotransglucosylase/hydrolases (XTH) are cell wall-modifying enzymes important in plant response to abiotic stress. However, the role of XTH in cadmium (Cd) tolerance in ramie remains largely unknown. Here, we identified and cloned BnXTH1, a member of the XTH family, in response to Cd stress in ramie. The BnXTH1 promoter (BnXTH1p) demonstrated that MeJA induces the response of BnXTH1p to Cd stress. Moreover, overexpressing BnXTH1 in Boehmeria nivea increased Cd tolerance by significantly increasing the Cd content in the cell wall and decreasing Cd inside ramie cells. Cadmium stress induced BnXTH1-expression and consequently increased xyloglucan endotransglucosylase (XET) activity, leading to high xyloglucan contents and increased hemicellulose contents in ramie. The elevated hemicellulose content increased Cd chelation onto the cell walls and reduced the level of intracellular Cd. Interestingly, overexpressing BnXTH1 significantly increased the content of Cd in vacuoles of ramie and vacuolar compartmentalization genes. Altogether, these results evidence that Cd stress induced MeJA accumulation in ramie, thus, activating BnXTH1 expression and increasing the content of xyloglucan to enhance the hemicellulose binding capacity and increase Cd chelation onto cell walls. BnXTH1 also enhances the vacuolar Cd compartmentalization and reduces the level of Cd entering the organelles and soluble solution.

Structural characterization of strawberry pomace

Strawberries are a nutrient dense food rich in vitamins, minerals, non-nutrient antioxidant phenolics, and fibers. Strawberry fiber bioactive structures are not well characterized and limited information is available about the interaction between strawberry fiber and phenolics. Therefore, we analyzed commercial strawberry pomace in order to provide a detailed carbohydrate structural characterization, and to associate structures with functions. The pomace fraction, which remained after strawberry commercial juice extraction, contained mostly insoluble (49.1 % vs. 5.6 % soluble dietary fiber) dietary fiber, with pectin, xyloglucan, xylan, β-glucan and glucomannan polysaccharides; glucose, fructose, xylose, arabinose, galactose, fucose and galacturonic acid free carbohydrates; protein (15.6 %), fat (8.34 %), and pelargonidin 3-glucoside (562 μg/g). Oligosaccharides from fucogalacto-xyloglucan, methyl-esterified rhamnogalacturonan I with branched arabinogalacto-side chains, rhamnogalacturonan II, homogalacturonan and β-glucan were detected by MALDI-TOF MS, NMR and glycosyl-linkage analysis. Previous reports suggest that these oligosaccharide and polysaccharide structures have prebiotic, bacterial pathogen anti-adhesion, and cholesterol-lowering activity, while anthocyanins are well-known antioxidants. A strawberry pomace microwave acid-extracted (10 min, 80 °C) fraction had high molar mass (2376 kDa) and viscosity (3.75 dL/g), with an extended rod shape. A random coil shape, that was reported previously to bind to phenolic compounds, was observed for other strawberry microwave-extracted fractions. These strawberry fiber structural details suggest that they can thicken foods, while the polysaccharide and polyphenol interaction indicates great potential as a multiple-function bioactive food ingredient important for gut and metabolic health.

Exploring the potential of selective oxidation in bioconjugation of collagen with xyloglucan carboxylates

Xyloglucan (XG), as a natural biopolymer, possesses a sound biocompatibility and an impressive biodegradability, which are usually featured with abundant hydroxyl groups available for the bioconjugation with a bioactive moiety, suggesting a promising or unique value possibly applied in the field of biomedicine. In this study, XG was extracted from Tamarind seeds and subjected to four regioselective oxidation methods to introduce carboxyl groups onto the XG molecules for a bioconjugation with collagen. Galactose oxidase and reducing end aldehyde group oxidation mainly resulted in a low carboxylate content at ∼0.34 mmol/g, whereas the primary and secondary hydroxyl group oxidations would lead to a high carboxyl content at ∼0.84 mmol/g. The number-average molar mass (Mn) and weight-average molar mass (Mw) of XG were 8.8 × 105 g/mol and 1.1 × 106 g/mol, respectively. The oxidized XGs were then subjected to a further biofunctionalization with the collagen through EDC/NHS coupling, which exhibited a degree of conjugation rate, ranged from 50 % to 72 %. The collagen-conjugated at the C6 position of XGs exhibited the highest cell viability recorded at 168 % in promoting cell growth and proliferation after 72 h of culture, surpassing that of pure collagen recorded at 138 %, which may indeed suggest a promising value in a biomedical application.

A novel AA14 LPMO from Talaromyces rugulosus with bifunctional cellulolytic/hemicellulolytic activity boosted cellulose hydrolysis

BACKGROUND

The recently discovered PcAA14A and B from white-rot basidiomycete Pycnoporus coccineus enriched our understanding of the oxidative degradation of xylan in fungi, however, the unusual mode of action of AA14 LPMOs has sparked controversy. The substrate specificity and functionality of AA14 LPMOs still remain enigmatic and need further investigation.

RESULTS

In this study, a novel AA14 LPMO was characterized from the ascomycete Talaromyces rugulosus. TrAA14A has a broad substrate specificity with strong oxidative activity on pure amorphous cellulose and xyloglucan. It could simultaneously oxidize cellulose, xylan and xyloglucan in natural hemi/cellulosic substrate such as fibrillated eucalyptus pulp, and released native and oxidized cello-oligosaccharides, xylo-oligosaccharides and xyloglucan oligosaccharides from this substrate, but its cellulolytic/hemicellulolytic activity became weaker as the contents of xylan increase in the alkaline-extracted hemi/cellulosic substrates. The dual cellulolytic/hemicellulolytic activity enables TrAA14A to possess a profound boosting effect on cellulose hydrolysis by cellulolytic enzymes. Structure modelling of TrAA14A revealed that it exhibits a relatively flat active-site surface similar to the active-site surfaces in AA9 LPMOs but quite distinct from PcAA14B, despite TrAA14A is strongly clustered together with AA14 LPMOs. Remarkable difference in electrostatic potentials of L2 and L3 surfaces was also observed among TrAA14A, PcAA14B and NcLPMO9F. We speculated that the unique feature in substrate-binding surface might contribute to the cellulolytic/hemicellulolytic activity of TrAA14A.

CONCLUSIONS

The extensive cellulolytic/hemicellulolytic activity on natural hemi/cellulosic substrate indicated that TrAA14A from ascomycete is distinctively different from previously characterized xylan-active AA9 or AA14 LPMOs. It may play as a bifunctional enzyme to decompose some specific network structures formed between cellulose and hemicellulose in the plant cell walls. Our findings shed new insights into the novel substrate specificities and biological functionalities of AA14 LPMOs, and will contribute to developing novel bifunctional LPMOs as the booster in commercial cellulase cocktails to efficiently break down the hemicellulose-cellulose matrix in lignocellulose.

Auxin acts upstream of nitric oxide to regulate cell wall xyloglucan and its aluminium-binding capacity in Arabidopsis thaliana

MAIN CONCLUSION

Auxin acts upstream of NO through NOA and XXT5 pathways to regulate the binding capacity of the root cell wall to Al. In our previous study, we identified an unknown mechanism by which 1-naphthaleneacetic acid (NAA) decreased the fixation of aluminum (Al) in the cell wall. Here, we observed that external application of the nitric oxide (NO) donor S-nitrosoglutathion (GSNO) increased the inhibition of Al on root elongation. Further analysis indicated that GSNO could induce Al accumulation in the roots and root cell walls, which is consistent with lower xyloglucan content. In comparison to the Columbia-0 (Col-0) wild type (WT), endogenous NO-reduced mutants noa1 (NOA pathway) and nia1nia2 (NR pathway) were more resistant to Al, with lower root Al content, higher xyloglucan content, and more Al accumulation in the root cell walls. By contrast, the xxt5 mutant with reduced xyloglucan content exhibited an Al-sensitive phenotype. Interestingly, Al treatment increased the endogenous auxin and NO levels, and the auxin levels induced under Al stress further stimulated NO production. Auxin application reduced Al retention in hemicellulose and decreased the xyloglucan content, similar to the effects observed with GSNO. In yucca and aux1-7 mutants, exogenous application of NO resulted in responses similar to those of the WT, whereas exogenous auxin had little effect on the noa1 mutant under Al stress. In addition, as auxin had similar effects on the nia1nia2 mutant and the WT, exogenous auxin and NO had little effect on the xxt5 mutant under Al stress, further confirming that auxin acts upstream of NO through NOA and XXT5 pathways to regulate the binding capacity of the root cell wall to Al.

Mechanical properties and wound healing potential of bacterial cellulose-xyloglucan-dextran hydrogels

Bacterial cellulose (BC) is a promising material for use as an artificial skin in wound healing application, however, its applications are limited due to its poor malleability. Incorporating non-cellulosic polysaccharides such as dextran and xyloglucan (XG) may enhance its respective wound healing and malleability. This study presents a novel in situ biopreparation method to produce BC-based hybrid hydrogels containing dextran (BC-D) and xyloglucan-dextran (BC-XG-D) with unique mechanical and rheological properties. Structural analysis revealed that dextran of different sizes (10 k, 70 k and 2 M of Mw) form micron-sized particles by loosely binding to cellulosic fibres. The addition of xyloglucan resulted acts as a lubricant in mechanical testing. The BC-XG-D hybrid hydrogels showed a reduced Young's modulus of 4 MPa and a higher maximum tensile strain of 53 % compared to native BC. Moreover, they displayed less plastic but more viscous behaviour under large shear strain deformation. The wound healing animal model experiments demonstrated that the BC-XG-D hybrid hydrogels promoted wound healing process and skin maturation. Overall, these findings contribute to the development of functional BC-based medical materials with desired mechanical and rheological properties that have the potential to accelerate wound healing.

Immunohistochemical dynamics of cell wall matrix polymers during tomato autograft healing

A large part of the production of tomato plants is grafted. Although it has recently been described that cell walls play an important role in tomato graft healing, the spatiotemporal dynamics of cell wall changes in this critical process remains largely unknown. The aim of this work was to immunolocalize changes in the major cell wall matrix components of autograft union tissues throughout the course of healing, from 1 to 20 days after grafting (DAG). Homogalacturonan was de novo synthetized and deposited in the cut edges, displaying the low methyl-esterified homogalacturonan a stronger labelling. Labelling of galactan side chains of rhamnogalacturonan increased until 8 DAG, although remarkably a set of cells at the graft union did not show labelling for this epitope. Changes in xylan immunolocalization were associated to the xylem vasculature development throughout, while those of xyloglucan revealed early synthesis at the cut edges. Arabinogalactan proteins increased up to 8 DAG and showed scion-rootstock asymmetry, with a higher extent in the scion. The combination of these changes appears to be related with the success of the autograft, specifically facilitating the adhesion phase between scion-rootstock tissues. This knowledge paves the way for improved grafting using methods that facilitate appropriate changes in the time and space dynamics of these cell wall compounds.

Efficacy and Tolerability of a Novel Topical Treatment Containing Pea Protein and Xyloglucan in the Management of Atopic Dermatitis in Children: A Prospective, Multicenter Clinical Study

INTRODUCTION

Atopic dermatitis (AD) is a chronic disease that occurs mainly in children. Topical corticosteroids are the main treatment for mild to moderate AD, although they can induce side effects. The efficacy and tolerability of xyloglucan and pea protein (XG-PP) was compared with hydrocortisone in pediatric patients with AD as a steroid-sparing solution.

METHODS

A prospective, multicenter, comparative study enrolled 42 patients (age 0.5-12 years) with mild-to-moderate AD, assigned 1:1 to XG-PP or hydrocortisone ointment. Treatments were applied twice daily for 14 consecutive days and assessed at baseline, day 8, and day 15. Efficacy endpoints were AD Severity Index (ADSI) score, Scoring Atopic Dermatitis (SCORAD) index, and Patient-Oriented Eczema Measure (POEM). Tolerability was assessed by the occurrence of adverse events (AEs).

RESULTS

Both treatments significantly improved ADSI mean score from baseline to day 15; in the XG-PP arm, ADSI score decreased from 10.55 to 4.15 (p = 0.00001), and in the hydrocortisone arm, from 10.65 to 4.30 (p = 0.0001). In the XG-PP arm, the mean SCORAD score decreased from 65.86 to 30.26 (p = 0.00001) and in the hydrocortisone arm from 68.84 to 31.19 (p = 0.0001) at day 15. An overall decrease from moderate to mild AD for both arms (p = 0.0001) was observed with POEM. For all the three indexes evaluated, no statistical significant differences between the study arms evolution from baseline to day 8 or to day 15 were found. No AEs were reported.

CONCLUSION

XG-PP provided a comparable efficacy to hydrocortisone ointment in managing AD, thus representing a safe and effective steroid-sparing alternative in pediatric patients with AD.

TRIAL REGISTRATION

Retrospectively registered on 24 November 2021 in the ISRCTN registry: 11118799.

Multifunctional xyloglucan-containing electrospun nanofibrous dressings for accelerating infected wound healing

Preventing wound infection is a major challenge in biomedicine. Conventional wound dressings often have poor moisturizing and antimicrobial properties unfavorable for wound healing. In this study, we prepared a multifunctional electrospun nanofiber dressing (PCQX-M) containing xyloglucan, quaternized chitosan, Polyvinyl alcohol, and collagen. By applying the concept of wet healing, xyloglucan and quaternized chitosan polysaccharides with excellent water solubility were employed to improve the absorption and moisturizing properties and maintain a moist microenvironment for the wound healing process. PCQX-M demonstrated high mechanical, thermodynamic, and biocompatible properties, providing suitable healing conditions for wounds. In addition, PCQX-M showed exceptional antibacterial properties and a potential inhibitory effect on the growth of microorganisms in infected wounds. More intriguingly, the restorative healing effect was investigated on a mouse model of whole skin injury infected with Staphylococcus aureus. Wound healing, collagen deposition, and immunofluorescence results showed that PCQX-M significantly promoted cell proliferation and angiogenesis at the injury site and facilitated the healing of the infected wound. Our study suggests that PCQX-M has excellent potential for clinical application in infected wound healing.

Structural elucidation of hemicelluloses from oil-tea camellia fruit shell

Oil-tea camellia fruit shell (CFS) is a very abundant waste lignocellulosic resource. The current treatments of CFS, i.e. composting and burning, pose a severe threat on environment. Up to 50 % of the dry mass of CFS is composed of hemicelluloses. However, chemical structures of the hemicelluloses in CFS have not been extensively studied, which limits their high-value utilization. In this study, different types of hemicelluloses were isolated from CFS through alkali fractionation with the assistance of Ba(OH)2 and H3BO3. Xylan, galacto-glucomannan and xyloglucan were found to be the major hemicelluloses in CFS. Through methylation, HSQC and HMBC analyses, we have found that the xylan in CFS is composed of →4)-β-D-Xylp-(1→ and →3,4)-β-D-Xylp-(1→ linked by (1→4)-β glycosidic bond as the main chain; the side chains are α-L-Fucp-(1→, →5)-α-L-Araf-(1→, β-D-Xylp-(1→, α-L-Rhap-(1→ and 4-O-Me-α-D-GlcpA-(1→, connected to the main chain through (1→3) glycosidic bond. The main chain of galacto-glucomannan in CFS consists of →6)-β-D-Glcp-(1→, →4)-β-D-Glcp-(1→, →4,6)-β-D-Glcp-(1→ and →4)-β-D-Manp-(1→; the side chains are β-D-Glcp-(1→, →2)-β-D-Galp-(1→, β-D-Manp-(1→ and →6)-β-D-Galp-(1→ connected to the main chain through (1→6) glycosidic bonds. Moreover, galactose residues are connected by α-L-Fucp-(1→. The main chain of xyloglucan is composed of →4)-β-D-Glcp-(1→, →4,6)-β-D-Glcp-(1→ and →6)-β-D-Glcp-(1→; the side groups, i.e. β-D-Xylp-(1→ and →4)-β-D-Xylp-(1→, are connected to the main chain by (1→6) glycosidic bond; →2)-β-D-Galp-(1→ and α-L-Fucp-(1→ can also connect to →4)-β-D-Xylp-(1→ forming di- or trisaccharide side chains.

Biocompatible polysaccharide fabricated graphene oxide nanoparticles: A versatile nanodrug carrier to deliver κ- carrageenan against cancer cells

A graphene oxide mediated hybrid nano system for pH stimuli-responsive and in vitro drug delivery targeted for cancer was described in this study. Graphene oxide (GO) functionalized Chitosan (CS) mediated nanocarrier capped with xyloglucan (XG) was fabricated with and without Kappa carrageenan (κ-C) from red seaweed, Kappaphycus alverzii, as an active drug. FTIR, EDAX, XPS, XRD, SEM and HR-TEM studies were carried out for GO-CS-XG nanocarrier loaded with and without active drugs to understand the physicochemical properties. XPS (C1s, N1s and O1s) confirmed the fabrications of XG and functionalization of GO by CS via the binding energies at 284.2 eV, 399.4 eV and 531.3 eV, respectively. The amount of drug loaded in vitro was 0.422 mg/mL. The GO-CS-XG nanocarrier showed a cumulative drug release of 77 % at acidic pH 5.3. In contrast to physiological conditions, the release rate of κ-C from the GO-CS-XG nanocarrier was considerably higher in the acidic condition. Thus, a pH stimuli-responsive anticancer drug release was successfully achieved with the GO-CS-XG-κ-C nanocarrier system for the first time. The drug release mechanism was carried out using various kinetic models that showed a mixed release behavior depending on concentration and diffusion/swelling mechanism. The best-fitting model which supports our release mechanism are zero order, first order and Higuchi models. GO-CS-XG and κ-C loaded nanocarrier biocompatibility were determined by in vitro hemolysis and membrane stabilization studies. MCF-7 and U937 cancer cell lines were used to study the cytotoxicity of the nanocarrier by MTT assay, which indicates excellent cytocompatibility. These findings support the versatile use of a green renewable biocompatible GO-CS-XG nanocarrier as targeted drug delivery and potential anticancer agent for therapeutic purposes.

Optimization of sodium alginate-galactoxyloglucan blended hydrogel beads through ionotropic gelation method

Hydrogels are 3D crosslinking networks of hydrophilic biopolymers which can able to absorb and retain large amount of water. In this present study, the Sodium alginate (SA)- Galactoxyloglucan (GXG) blended hydrogel beads were prepared and optimized through two level optimization steps. Alginates and xyloglucan are the cell wall polysaccharides biopolymers obtained from the plant sources, Sargassum sp. and Tamarindus indica L. respectively. The extracted biopolymers were confirmed and characterized by UV-Spectroscopy, FT-IR, NMR and TGA analysis. Based on the hydrophilicity, non-toxicity and biocompatibility, SA-GXG hydrogel were prepared and optimized through two-level optimization steps. The optimized hydrogel bead formulation was characterized through FT-IR, TGA and SEM analysis. From the obtained result, it is found that the polymeric formulation GXG (2 % w/v)-SA (1.5 % w/v), cross-linker (CaCl₂) concentration at 0.1 M and the cross-linking time at 15 Min showed significant swelling index. The optimized hydrogel beads are porous and show good swelling capacity and thermal stability. The optimized protocol of hydrogel beads may be useful in designing hydrogel beads for specific applications in agricultural, Biomedical and remediation sectors.

Tablet formulation with dual control concept for efficient colonic drug delivery

Aim of this study was to develop a tablet formulation for targeted colonic drug release by implementing two control mechanisms: A pH-sensitive coating layer based on Eudragit® FS 30 D to prevent drug release in the upper gastrointestinal tract, combined with a matrix based on plant-derived polysaccharide xyloglucan to inhibit drug release after coating removal in the small intestine and to allow microbiome triggered drug release in the colon. In vitro dissolution tests simulated the passage through the entire gastrointestinal tract with a four-stage protocol, including microbial xyloglucanase addition in physiologically relevant concentrations as microbiome surrogate to the colonic dissolution medium. Matrix erosion was monitored in parallel to drug release by measurement of reducing sugar equivalents resulting from xyloglucan hydrolysis. Limited drug release in gastric and small intestinal test stages and predominant release in the colonic stage was achieved. The xyloglucan matrix controlled drug release after dissolution of the enteric coating through the formation of a gummy polysaccharide layer at the tablet surface. Matrix degradation was dependent on enzyme concentration in the colonic medium and significantly accelerated drug release resulting in erosion-controlled release process. Drug release at physiologically relevant enzyme concentration was completed within the bounds of colonic transit time. The dual control concept was applicable to two drug substances with different solubility, providing similar release rates in colonic environment containing xyloglucanase. Drug solubility mechanistically affected release, with diffusion of caffeine, but not of 5-ASA, contributing to the overall release rate out of the matrix tablet.

Acetylation modification improved the physicochemical properties of xyloglucan from tamarind seeds

Acetylation modification was conducted to improve the water-solubility and solution properties of xyloglucan from tamarind seeds (TSX). Three acetylated TSX with different degree of substitution (DS) were successfully prepared, and their structure and molecular parameters were investigated by FT-IR, NMR, and high-performance size exclusion chromatography (HPSEC). Further, the effects of acetylation on the thermal stability, solubility, and rheological properties of TSX were studied. Results showed that acetyl groups were mainly substituted at the O-6 position of terminal galactose with DS of 0.2, 0.47, and 0.36 for AC-2, AC-5, and AC-10, respectively. HPSEC analysis indicated that molecular weight of acetylated derivatives decreased slightly, and the solution conformation became more flexible as the DS increase. By comparing with TSX, the thermal stability, water-solubility, solution transmittance, and ζ-potential of acetylated TSX were significantly improved as the DS increase. In addition, rheological studies demonstrated that acetylation reduced the shear viscosity, but high DS of acetylation could induce the weak gelling property of TSX. In conclusion, acetylation modification could be applied to improve the physicochemical properties of TSX and promote its further application in food and pharmaceutical industries.

Transcriptome profiling of celery petiole tissues reveals peculiarities of the collenchyma cell wall formation

Transcriptome and biochemical analyses are applied to individual plant cell types to reveal potential players involved in the molecular machinery of cell wall formation in specialized cells such as collenchyma. Plant collenchyma is a mechanical tissue characterized by an irregular, thickened cell wall and the ability to support cell elongation. The composition of the collenchyma cell wall resembles that of the primary cell wall and includes cellulose, xyloglucan, and pectin; lignin is absent. Thus, the processes associated with the formation of the primary cell wall in the collenchyma can be more pronounced compared to other tissues due to its thickening. Primary cell walls intrinsic to different tissues may differ in structure and composition, which should be reflected at the transcriptomic level. For the first time, we conducted transcriptome profiling of collenchyma strands isolated from young celery petioles and compared them with other tissues, such as parenchyma and vascular bundles. Genes encoding proteins involved in the primary cell wall formation during cell elongation, such as xyloglucan endotransglucosylase/hydrolases, expansins, and leucine-rich repeat proteins, were significantly activated in the collenchyma. As the key players in the transcriptome orchestra of collenchyma, xyloglucan endotransglucosylase/hydrolase transcripts were characterized in more detail, including phylogeny and expression patterns. The comprehensive approach that included transcriptome and biochemical analyses allowed us to reveal peculiarities of collenchyma cell wall formation and modification, matching the abundance of upregulated transcripts and their potential substrates for revealed gene products. As a result, specific isoforms of multigene families were determined for further functional investigation.

Deposition patterns of feruloylarabinoxylan during cell wall formation in moso bamboo

The feruloylarabinoxylan deposition was initiated at the formation of the secondary cell wall, especially S₂ layer in moso bamboo, which may affect crosslinking between cell wall components and plant growth. Hemicelluloses, major components of plant cell walls that are hydrogen bonded to cellulose and covalently bound to lignin, are crucial determinants of cell wall properties. Especially in commelinid monocotyledons, arabinoxylan is often esterified with ferulic acid, which is essential to crosslinking with cell wall components. However, the deposition patterns and localization of ferulic acid during cell wall formation remain unclear. In this study, developing moso bamboo (Phyllostachys pubescens) culms were used to elucidate deposition patterns of hemicelluloses including feruloylarabinoxylan. Ferulic acid content peaked with cessation of elongation growth, and thereafter decreased and remained stable as culm development proceeded. During primary cell wall (PCW) formation, xyloglucan and (1,3;1,4)-β-glucan signals were detected in all tissues. Along with culm development, arabinoxylan and feruloylarabinoxylan signals were sequentially observed in the protoxylem, vascular fibers and metaxylem, and parenchyma. Feruloylarabinoxylan signals were observed slightly later than arabinoxylan signals. Arabinoxylan signals were observed throughout the compound middle lamella and secondary cell wall (SCW), whereas the feruloylarabinoxylan signal was localized to the S₂ layer of the SCW. These results indicate that the biosynthesis of hemicelluloses is regulated in accordance with cell wall layers. Feruloylarabinoxylan deposition may be initiated at the formation of SCW, especially S₂ layer formation. Ferulic acid-mediated linkages of arabinoxylan-arabinoxylan and arabinoxylan-lignin would arise during SCW formation with the cessation of elongation growth.

Extending the diversity of Myceliophthora thermophila LPMOs: Two different xyloglucan cleavage profiles

Lytic polysaccharide monooxygenases (LPMOs) play a key role in enzymatic conversion of plant cell wall polysaccharides. Continuous discovery and functional characterization of LPMOs highly contribute to the tailor-made design and improvement of hydrolytic-activity based enzyme cocktails. In this context, a new MtLPMO9F was characterized for its substrate (xyloglucan) specificity, and MtLPMO9H was further delineated. Aided by sodium borodeuteride reduction and hydrophilic interaction chromatography coupled to mass spectrometric analysis, we found that both MtLPMOs released predominately C4-oxidized, and C4/C6-double oxidized xylogluco-oligosaccharides. Further characterization showed that MtLPMO9F, having a short active site segment 1 and a long active site segment 2 (^-Seg1⁺Seg2), followed a "substitution-intolerant" xyloglucan cleavage profile, while for MtLPMO9H (⁺Seg1^-Seg2) a "substitution-tolerant" profile was found. The here characterized xyloglucan specificity and substitution (in)tolerance of MtLPMO9F and MtLPMO9H were as predicted according to our previously published phylogenetic grouping of AA9 LPMOs based on structural active site segment configurations.

Iota-carrageenan/xyloglucan/serine powders loaded with tranexamic acid for simultaneously hemostatic, antibacterial, and antioxidant performance

This study sought to prepare powder hemostats based on iota-carrageenan (ιC), xyloglucan (XYL), l-serine (SER), and tranexamic acid (TA). The powder form was chosen because it enables the hemostat to be used in wounds of any shape and depth. The powder hemostats showed irregular shapes and specific surface areas ranging from 34 to 46 m²/g. Increasing TA amount decreases the specific surface area, bulk density, water and blood absorption, and the antibacterial activities of the powder hemostats, but not the water retention ability. Conversely, in vitro biodegradation was positively impacted by increasing the TA content in the powder hemostats. In both the in vitro and in vivo tests, powder hemostats showed reduced bleeding time, significant adhesion of red blood cells, great hemocompatibility, moderate antioxidant activity, and high biocompatibility. These findings shed new light on designing powder hemostats with intrinsic antibacterial and antioxidant activity and excellent hemostatic performance.

Comparison of the Biochemical Properties and Roles in the Xyloglucan-Rich Biomass Degradation of a GH74 Xyloglucanase and Its CBM-Deleted Variant from Thielavia terrestris

Xyloglucan is closely associated with cellulose and still retained with some modification in pretreated lignocellulose; however, its influence on lignocellulose biodegradation is less understood. TtGH74 from Thielavia terrestris displayed much higher catalytic activity than previously characterized fungal GH74 xyloglucanases. The carbohydrate-binding module 1 (CBM1) deleted variant (TtGH74ΔCBM) had the same optimum temperature and pH but an elevated thermostability. TtGH74 displayed a high binding affinity on xyloglucan and cellulose, while TtGH74ΔCBM completely lost the adsorption capability on cellulose. Their hydrolysis action alone or in combination with other glycoside hydrolases on the free xyloglucan, xyloglucan-coated phosphoric acid-swollen cellulose or pretreated corn bran and apple pomace was compared. CBM1 might not be essential for the hydrolysis of free xyloglucan but still effective for the associated xyloglucan to an extent. TtGH74 alone or synergistically acting with the CBH1/EG1 mixture was more effective in the hydrolysis of xyloglucan in corn bran, while TtGH74ΔCBM showed relatively higher catalytic activity on apple pomace, indicating that the role and significance of CBM1 are substrate-specific. The degrees of synergy for TtGH74 or TtGH74ΔCBM with the CBH1/EG1 mixture reached 1.22–2.02. The addition of GH10 xylanase in TtGH74 or the TtGH74ΔCBM/CBH1/EG1 mixture further improved the overall hydrolysis efficiency, and the degrees of synergy were up to 1.50–2.16.

Reconsidering the function of the xyloglucan endotransglucosylase/hydrolase family

Plants possess an outer cell layer called the cell wall. This matrix comprises various molecules, such as polysaccharides and proteins, and serves a wide array of physiologically important functions. This structure is not static but rather flexible in response to the environment. One of the factors responsible for this plasticity is the xyloglucan endotransglucosylase/hydrolase (XTH) family, which cleaves and reconnects xyloglucan molecules. Since xyloglucan molecules have been hypothesised to tether cellulose microfibrils forming the main load-bearing network in the primary cell wall, XTHs have been thought to play a central role in cell wall loosening for plant cell expansion. However, multiple lines of recent evidence have questioned this classic model. Nevertheless, reverse genetic analyses have proven the biological importance of XTHs; therefore, a major challenge at present is to reconsider the role of XTHs in planta. Recent advances in analytical techniques have allowed for gathering rich information on the structure of the primary cell wall. Thus, the integration of accumulated knowledge in current XTH studies may offer a turning point for unveiling the precise functions of XTHs. In the present review, we redefine the biological function of the XTH family based on the recent architectural model of the cell wall. We highlight three key findings regarding this enzyme family: (1) XTHs are not strictly required for cell wall loosening during plant cell expansion but play vital roles in response to specific biotic or abiotic stresses; (2) in addition to their transglycosylase activity, the hydrolase activity of XTHs is involved in physiological benefits; and (3) XTHs can recognise a wide range of polysaccharides other than xyloglucans.

Covalently linked pectin-arabinoglucuronoxylan complex from Siberian fir Abies sibirica Ledeb

In this study, by NMR spectroscopy, first was proved that the pectic polysaccharides of Abies sibirica are covalently bound to arabinoglucuronoxylan (AGX). Namely, AGX is attached at the 4th position to the 1,2,4-α-L-Rha residues of the RG-I main chain, indicating the following fragment: …→2)-[(2,4-β-D-Xylp)-(1→4)]-[(α-D-GalpA-(1→2)]-α-L-Rhap-(1→4)-α-D-GalpA-(1→…. We present direct evidence of covalent attachment between C1 of 1,2,4-β-D-Xylp from arabinoglucuronoxylan and С4 of 1,2,4-α-L-Rhap from RG-I of pectin by detailed 2D NMR analyses. It can be concluded that the 1,2,4-α-L-Rhap residues, were substituted at the 4th position by 1,5-α-L-arabinan or 1,4-β-D-galactan or AGX. The discovery of this interglycosidic linkage between xylan and pectin contradicts the classical model of the cell wall, which describes networks of binding glycans and pectic polysaccharides as separate and independent of one another. We can conclude that pectin undoubtedly plays a more important supporting and cross-linking role in the cell wall than is commonly thought.

Structure of KOH-extractable polysaccharides of tree greenery of from Siberian fir Abies sibirica Ledeb

Polysaccharide AS_K was extracted with aqueous KOH from the Abies sibirica foliage. Pectin, xylan, AGPs and xyloglucan were isolated from AS_K by anion-exchange chromatography and Smith degradation, combined with enzymatic cleavage. Potential interactions between those polymers were examined. Since xylan, AGPs, RG-I and glucan were co-fractionated following complete removal of galacturonan (HG) with polygalacturonase, it can be inferred that the enzymatic cleavage of HG did not affect co-fractionation of cross-linking glycans, RG-I and AGPs. These were hypothesized to be bound via a covalent cross-link, as the removal of HG regions did not affect this complex. Given that pectin was represented solely by RG-I regions, it can be assumed that some of glucan, xylan and AGPs were associated directly with RG-I. Besides, the enzymatic hydrolysis eliminated most of xylose and rhamnose. This suggests implicitly that some of xylan was linked to RG-I.

The graft framework: Quantitative changes in cell wall matrix polysaccharides throughout the tomato graft union formation

Plant cell walls provide essential functions in cell recognition, differentiation, adhesion and wound responses. Therefore, it is tempting to hypothesize that cell walls play a key role in grafting, but to date there are no quantitative studies targeting on cell wall changes during grafting. The aim of this work was to investigate the dynamics of pectic and hemicellulosic polysaccharides at the graft junctions in tomato homografts throughout the first 12 days after grafting. Cell wall fractionation, combined with ATR-FTIR spectroscopy and gas-chromatography, evidenced a marked increase in pectin content and a decrease in the degree of methyl-esterification of homogalacturonan in scion and rootstock throughout grafting. Also, recovery of tightly-bound hemicelluloses decreased at late times after grafting suggesting an increase of cross-linked hemicelluloses along grafting. In addition, immuno-dot assays revealed an increase in xyloglucan and arabinogalactan proteins in the first days after grafting, pointing to a presumed role in tissue adhesion-cohesion.

Characterization of an extracellular α-xylosidase involved in xyloglucan degradation in Aspergillus oryzae

α-Xylosidases release the α-D-xylopyranosyl side chain from di- and oligosaccharides derived from xyloglucans and are involved in xyloglucan degradation. In this study, an extracellular α-xylosidase, named AxyB, is identified and characterized in Aspergillus oryzae. AxyB belongs to the glycoside hydrolase family 31 and releases D-xylose from isoprimeverose (α-D-xylopyranosyl-(1 → 6)-D-glucopyranose) and xyloglucan oligosaccharides. In the hydrolysis of xyloglucan oligosaccharides (XLLG, Glc₄Xyl₃Gal₂ nonasaccharide; XLXG/XXLG, Glc₄Xyl₃Gal₁ octasaccharide; and XXXG, Glc₄Xyl₃ heptasaccharide), AxyB releases one molecule of the xylopyranosyl side chain attached to the non-reducing end of the β-1,4-glucan main chain of these xyloglucan oligosaccharides to yield GLLG (Glc₄Xyl₂Gal₂), GLXG/GXLG (Glc₄Xyl₂Gal₁), and GXXG (Glc₄Xyl₂). A. oryzae has both extracellular and intracellular α-xylosidase, suggesting that xyloglucan oligosaccharides are degraded by a combination of isoprimeverose-producing oligoxyloglucan hydrolase and intracellular α-xylosidase and a combination of extracellular α-xylosidase and β-glucosidase(s) in A. oryzae. KEY POINTS: • An extracellular α-xylosidase, AxyB, is identified in Aspergillus oryzae. • AxyB releases the xylopyranosyl side chain from xyloglucan oligosaccharides. • Different sets of glycosidases degrade xyloglucan oligosaccharides in A. oryzae.

Xyloglucan Xylosyltransferase 1 Displays Promiscuity Toward Donor Substrates During in Vitro Reactions

Glycosyltransferases (GTs) are a large family of enzymes that add sugars to a broad range of acceptor substrates, including polysaccharides, proteins and lipids, by utilizing a wide variety of donor substrates in the form of activated sugars. Individual GTs have generally been considered to exhibit a high level of substrate specificity, but this has not been thoroughly investigated across the extremely large set of GTs. Here we investigate xyloglucan xylosyltransferase 1 (XXT1), a GT involved in the synthesis of the plant cell wall polysaccharide, xyloglucan. Xyloglucan has a glucan backbone, with initial side chain substitutions exclusively composed of xylose from uridine diphosphate (UDP)-xylose. While this conserved substitution pattern suggests a high substrate specificity for XXT1, our in vitro kinetic studies elucidate a more complex set of behavior. Kinetic studies demonstrate comparable kcat values for reactions with UDP-xylose and UDP-glucose, while reactions with UDP-arabinose and UDP-galactose are over 10-fold slower. Using kcat/KM as a measure of efficiency, UDP-xylose is 8-fold more efficient as a substrate than the next best alternative, UDP-glucose. To the best of our knowledge, we are the first to demonstrate that not all plant XXTs are highly substrate specific and some do show significant promiscuity in their in vitro reactions. Kinetic parameters alone likely do not explain the high substrate selectivity in planta, suggesting that there are additional control mechanisms operating during polysaccharide biosynthesis. Improved understanding of substrate specificity of the GTs will aid in protein engineering, development of diagnostic tools, and understanding of biological systems.

Injectable xyloglucan hydrogels incorporating spheroids of adipose stem cells for bone and cartilage regeneration

Cartilage or bone regeneration approaches based on the direct injection of mesenchymal stem cells (MSCs) at the lesion site encounter several challenges, related to uncontrolled cell spreading and differentiation, reduced cell viability and poor engrafting. This work presents a simple and versatile strategy based on the synergic combination of in-situ forming hydrogels and spheroids of adipose stem cells (SASCs) with great potential for minimally invasive regenerative interventions aimed to threat bone and cartilage defects. Aqueous dispersions of partially degalactosylated xyloglucan (dXG) are mixed with SASCs derived from liposuction and either a chondroinductive or an osteoinductive medium. The dispersions rapidly set into hydrogels when temperature is brought to 37 °C. The physico-chemical and mechanical properties of the hydrogels are controlled by polymer concentration. The hydrogels, during 21 day incubation at 37 °C, undergo significant structural rearrangements that support cell proliferation and spreading. In formulations containing 1%w dXG cell viability increases up to 300% for SASCs-derived osteoblasts and up to 1000% for SASCs-derived chondrocytes if compared with control 2D cultures. The successful differentiation into the target cells is supported by the expression of lineage-specific genes. Cell-cell and cell-matrix interactions are also investigated. All formulations resulted injectable, and the incorporated cells are fully viable after injection.

A Single Xyloglucan Xylosyltransferase Is Sufficient for Generation of the XXXG Xylosylation Pattern of Xyloglucan

Xyloglucan is the most abundant hemicellulose in the primary cell walls of dicots. Dicot xyloglucan is the XXXG type consisting of repeating units of three consecutive xylosylated Glc residues followed by one unsubstituted Glc. Its xylosylation is catalyzed by xyloglucan 6-xylosyltransferases (XXTs) and there exist five XXTs (AtXXT1-5) in Arabidopsis. While AtXXT1 and AtXXT2 have been shown to add the first two Xyl residues in the XXXG repeat, which XXTs are responsible for the addition of the third Xyl residue remains elusive although AtXXT5 was a proposed candidate. In this report, we generated recombinant proteins of all five Arabidopsis XXTs and one rice XXT (OsXXT1) in the mammalian HEK293 cells and investigated their ability to sequentially xylosylate Glc residues to generate the XXXG xylosylation pattern. We found that like AtXXT1/2, AtXXT4 and OsXXT1 could efficiently xylosylate the cellohexaose (G6) acceptor to produce mono- and di-xylosylated G6, whereas AtXXT5 was only barely capable of adding one Xyl onto G6. When AtXXT1-catalyzed products were used as acceptors, AtXXT1/2/4 and OsXXT1, but not AtXXT5, were able to xylosylate additional Glc residues to generate tri- and tetra-xylosylated G6. Further characterization of the tri- and tetra-xylosylated G6 revealed that they had the sequence of GXXXGG and GXXXXG with three and four consecutive xylosylated Glc residues, respectively. In addition, we have found that although tri-xylosylation occurred on G6, cello-oligomers with a degree of polymerization of 3 to 5 could only be mono- and di-xylosylated. Together, these results indicate that each of AtXXT1/2/4 and OsXXT1 is capable of sequentially adding Xyl onto three contiguous Glc residues to generate the XXXG xylosylation pattern and these findings provide new insight into the biochemical mechanism underlying xyloglucan biosynthesis.

Cutin:xyloglucan transacylase (CXT) activity covalently links cutin to a plant cell-wall polysaccharide

The shoot epidermal cell wall in land-plants is associated with a polyester, cutin, which controls water loss and possibly organ expansion. Covalent bonds between cutin and its neighbouring cell-wall polysaccharides have long been proposed. However, the lack of biochemical evidence makes cutin-polysaccharide linkages largely conjectural. Here we optimised a portfolio of radiochemical assays to look for cutin-polysaccharide ester bonds in the epidermis of pea epicotyls, ice-plant leaves and tomato fruits, based on the hypothesis that a transacylase remodels cutin in a similar fashion to cutin synthase and cutin:cutin transacylase activities. Through in-situ enzyme assays and chemical degradations coupled with chromatographic analysis of the 3H-labelled products, we observed that among several wall-related oligosaccharides tested, only a xyloglucan oligosaccharide ([3H]XXXGol) could acquire ester-bonds from endogenous cutin, suggesting a cutin:xyloglucan transacylase (CXT). CXT activity was heat-labile, time-dependent, and maximal at near-neutral pH values. In-situ CXT activity peaked in nearly fully expanded tomato fruits and ice-plant leaves. CXT activity positively correlated with organ growth rate, suggesting that it contributes to epidermal integrity during rapid expansion. This study uncovers hitherto unappreciated re-structuring processes in the plant epidermis and provides a step towards the identification of CXT and its engineering for biotechnological applications.

Cytotoxic effect of xyloglucan and oxovanadium (IV/V) xyloglucan complex in HepG2 cells

It is well known that the chemical structure of polysaccharides is important to their final biological effect. In this study we investigated the cytotoxic effect of xyloglucan from Copaifera langsdorffii seeds (XGC) and its complex with oxovanadium (XGC:VO) on hepatocellular carcinoma cells (HepG2). After 72 h of incubation, XGC and XGC:VO (200 μg/mL) reduced cell viability in ~20% and ~40%, respectively. At same conditions, only XGC:VO increased in ~20% the LDH enzyme release. In permeabilized cells, incubated with XGC and XGC:VO (200 μg/mL) for 72 h, NADH oxidase activity was reduced by ~45% with XGC and XGC:VO. The succinate oxidase activity was reduced by ~35% with XGC and ~65% with XGC:VO, evidencing that polysaccharide complexation with vanadium could intensify its effects on the respiratory chain. According to this result, the mitochondrial membrane potential was also reduced by ~9% for XGC and ~30% for XGC:VO, when compared to the control group. Interestingly, ATP levels were more elevated for XGC:VO in respect to XGC, probably due the enhance in glycolytic flux evidenced by increased levels of lactate. These results show that the xyloglucan complexation with oxovanadium (IV/V) potentiates the cytotoxic effect of the native polysaccharide, possibly by impairment of oxidative phosphorylation.

Characterization of pectin-xylan-glucan-arabinogalactan proteins complex from Siberian fir Abies sibirica Ledeb

Polysaccharide AS_K was isolated from the Abies sibirica foliage by extraction with an aqueous KOH solution. AS_K was shown to contain structurally different polymers such as arabinoglucuronoxylans, xyloglucans, glucomannans, arabinogalactan-proteins (AGPs). The pectic polysaccharides were also found in the alkaline extract of AS_K and were represented by regions of homogalactorunan and rhamnogalactouronan-I whose side sugar chains were made up chiefly of highly branched 1,5-α-l-arabinan. The potential couplings between those polysaccharides were examined. Our studies showed simultaneous elution of pectin, xyloglucans, arabinoglucuronoxylans and AGPs, indicating that pectins can be covalently bound to the other cell-wall polysaccharides. NMR spectroscopy results revealed that the polysaccharides obtained by ion-exchange chromatography almost had no free reducing ends. These findings corroborate the conclusion that pectin, AGPs, glucan and xylan are bound together. The existence of the covalently bound complex of pectin-xylan-xyloglucan-AGP is suggested herein. Pectin and xylan are hypothesized to be covalently linked through RG-I regions.

Organically-bound silicon enhances resistance to enzymatic degradation and nanomechanical properties of rice plant cell walls

Plant cell walls exhibit excellent mechanical properties, which form the structural basis for sustainable bioresources and multifunctional nanocelluloses. The wall nanomechanical properties of living cells through covalent modifications of hybrid inorganic elements, such as silicon, may confer significant influence on local mechano-response and enzymatic degradation. Here, we present a combination of ex situ measurements of enzyme-released oligosaccharide fragments using MALDI-TOF MS and in situ atomic force microscopy (AFM) imaging through PeakForce quantitative nanomechanical mapping of tip-functionalized single-molecule enzyme-polysaccharide substrate recognition and the nanoscale dissolution kinetics of individual cellulose microfibrils of living rice (Oryza sativa) cells following silicate cross-linking of cell wall xyloglucan. We find that xyloglucan-bound silicon enhances the resistance to degradation by cellulase and improves the wall nanomechanical properties in the elastic modulus at the single-cell level. The findings establish a direct link between an inorganic element of silicon and the nanoscale architecture of plant cell wall materials for sustainable utilization.

Interaction of cellulose and xyloglucan influences in vitro fermentation outcomes

To investigate the effects of interactions between cellulose and xyloglucan (XG) on in vitro fermentation, a composite of bacterial cellulose (BC) incorporating XG during pellicle formation (BCXG), was fermented using a human faecal inoculum, and compared with BC, XG and a mixture (BC&XG) physically blended to have the same BC to XG ratio of BCXG. Compared to individual polysaccharides, the fermentation extent of BC and fermentation rate of XG were promoted in BC&XG. XG embedded in the BCXG composite was degraded less than in BC&XG, while more cellulose in BCXG was fermented than in BC&XG. This combination explains the similar amount of short chain fatty acid production noted throughout the fermentation process for BCXG and BC&XG. Microbial community dynamics for each substrate were consistent with the corresponding polysaccharide degradation. Thus, interactions between cellulose and XG are shown to influence their fermentability in multiple ways.

Entropy drives the adsorption of xyloglucan to cellulose surfaces - A molecular dynamics study

The adsorption of nonionic polymers to cellulose is of large importance both in the plant cell wall during synthesis and for the development of sustainable materials from wood. Here, the thermodynamics of adsorption of the polysaccharide xyloglucan (XG) to both native and chemically modified cellulose with carboxyl groups was investigated using molecular dynamics simulations. The free energy of adsorption was calculated as the potential of mean force between an XG oligomer and model cellulose surfaces in a range of temperatures from 298 K to 360 K. It was found that the adsorption near room temperature is an endothermic process dominated by the entropy of released interfacial water molecules. This was corroborated by quantitative assessment of the absolute entropy per water molecule both at the interface and in the bulk. In the case of native cellulose, the adsorption became exothermic at higher temperatures, while the relatively strong interactions between water and the charged groups of the oxidized cellulose impede such a transition. The results also indicate that the extraction of strongly associated hemicelluloses would be facilitated by low temperature.

Enzymatic degradation of xyloglucans by Aspergillus species: a comparative view of this genus

Aspergillus species are closely associated with humanity through fermentation, infectious disease, and mycotoxin contamination of food. Members of this genus produce various enzymes to degrade plant polysaccharides, including starch, cellulose, xylan, and xyloglucan. This review focus on the machinery of the xyloglucan degradation using glycoside hydrolases, such as xyloglucanases, isoprimeverose-producing oligoxyloglucan hydrolases, and α-xylosidases, in Aspergillus species. Some xyloglucan degradation-related glycoside hydrolases are well conserved in this genus; however, other enzymes are not. Cooperative actions of these glycoside hydrolases are crucial for xyloglucan degradation in Aspergillus species. KEY POINTS: •Xyloglucan degradation-related enzymes of Aspergillus species are reviewed. •Each Aspergillus species possesses a different set of glycoside hydrolases. •The machinery of xyloglucan degradation of A. oryzae is overviewed.

Strategic aromatic residues in the catalytic cleft of the xyloglucanase MtXgh74 modifying thermostability, mode of enzyme action, and viscosity reduction ability

The thermostable endo-processive xyloglucanase MtXgh74 from Myceliophthora thermophila was used to study the influence of aromatic amino acids in the catalytic cleft on the mode of action and the ability of enzyme to reduce xyloglucan viscosity. The enzyme derivative Mut I with mutations W64A/W67A in the "negative" subsites of the catalytic cleft resulted in a 5.5-fold increase of the K_m value. Mut I produced oligosaccharides of various lengths in addition to xyloglucan building blocks. The W320A/W321A substitutions in the "positive" subsites of the mutated enzyme Mut II catalytic cleft increased the K_m value 54-fold and resulted in an endo-dissociative mode of action. The ability of Mut II to reduce the viscosity of xyloglucan at 50 °C was much better than that of other MtXgh74 variants. Besides, Mut II efficiently reduced viscosity of a natural substrate, the pulp of xyloglucan-containing tamarind seed flour. The K_m, V_max, and k_cat values and viscosity reduction ability of the enzyme derivative Mut III (W320A/W321A/G446Y) returned to levels close to that of MtXgh74. The pattern of xyloglucan hydrolysis by Mut III was typical for endo-processive xyloglucanases. The thermostability of Mut I and Mut II at 60 °C decreased significantly compared to the wild type, whereas the thermostability of Mut III at 60 °C restored almost to the MtXgh74-wt value. All mutants lost the ability to cleave the backbone of xyloglucan building blocks which was a characteristic of MtXgh74. Instead they acquired a low branch removing activity. Molecular dynamics simulations revealed the role of mutated amino acids in the complex action mechanism of GH74 enzymes. KEY POINTS: • Endo-processive mode of action of the xyloglucanase MtXgh74 was altered by rational design. • The endo-dissociative mutant Mut II (W320A/W321A) efficiently reduced XyG viscosity. • The substitutions W320A/W321A/G446Y in Mut III recovered the endo-processive mode. • Mut II can be used to reduce the viscosity of biomass slurries containing tamarind seed flour.

Arabinoxylan combined with different glucans improve lipid metabolism disorder by regulating bile acid and gut microbiota in mice fed with high-fat diet

The effect of arabinoxylan (AX) combined with β-glucan and xyloglucan on lipid metabolism by regulating bile acids and gut microbiota was investigated in mice fed with high-fat diet. Fifty male ICR/KM mice were randomly divided into five groups: control diet (CON) group, high-fat diet (HFD) group, high-fat diet with AX (HFAX) group, high-fat diet with AX and β-glucan (HFAB) group, and high-fat diet with AX and xyloglucan (HFAG) group. After 8 weeks of feeding, the mice were sacrificed and samples were collected. In contrast to CON, HFD disturbed lipid metabolism, bile acids, and gut microbiota in mice. Mice in HFD group had increase in weight, blood lipids and liver fat, and circulating bile acid as well as abnormal liver tissue morphology and disordered gut microbiota. Compared with HFD, HFAB and HFAG mice had reduced body weight and cholesterol and triglyceride levels; Fxr was activated, Cyp7a1 was inhibited to reduce bile acids, the microbial species diversity increased, the number of beneficial bacteria increased, and the number of conditional pathogenic bacteria decreased. HFAG uniquely activated intestinal bile acid receptors (Fxr and Tgr5) and increased the abundance of Bacteroidetes and Akkermansia. In summary, the effect of AX compounded glucans (β-glucan or xyloglucan) on lipid metabolism was better than that of single AX by regulating bile acid metabolism and gut microbiota possibly due to the more complex chemical structure of combined polysaccharides.

Hierarchical thermoplastic biocomposites reinforced with flax fibres modified by xyloglucan and cellulose nanocrystals

This work is focused on the modification of the interphase zone in short flax fibres / polypropylene (PP) composites by a bio-inspired modification of fibres called "nanostructuration" that uses the adsorption of biomass by-products, i.e. cellulose nanocrystals (CNC) and xyloglucan (XG), to create hierarchical flax fibres. The wettability and interfacial adhesion study reveals a strong decrease in the polar character of CNC modified flax fibres, hence increasing the work of adhesion with PP. Moreover, combining XG/CNC modified interphases with MAPP coupling agent enhances the ultimate mechanical properties of biocomposites with higher tensile strength and work of rupture, and modifies failure mechanisms as revealed by in situ micro-mechanical tensile SEM experiments. Bio-based hierarchical composites inspired by naturally occurring nanostructures open a new path for the development of sustainable composites with enhanced structural properties.

Efficacy of Xyloglucan against Escherichia coli Extraintestinal Urinary Tract Infection: An in vivo Study

Natural approaches to conventional pharmaceutical treatments for urinary tract infections (UTIs) have focused attention toward reducing the colonization of intestinal Escheri-chia coli reservoirs, the cause of ascending and hematogenous UTIs. In this study, we evaluated the protective effect of xyloglucan and xyloglucan plus gelose on intestinal and urinary epithelia in an in vivo E. coli infection model. Preventative xyloglucan and xyloglucan plus gelose oral treatments were performed by gavage 2 days before E. coli administration and every day until day 7. In vitro, xyloglucan had no effect on bacterial growth, cell morphology, or integrity. The results clearly demonstrated the protective barrier effect of xyloglucan in the bladder and intestine, as evidenced by a reduction in histological changes, neutrophil infiltration, and tight junction permeability in the intestine following E. coli infection. The potential beneficial effect of xyloglucan in preventing UTIs was supported by a reduction of E. coli-positive colony-forming units in the urinary tract. We consider xyloglucan in association with gelose to be an effective oral medical device for the prevention of extraintestinal UTIs.

Enzymically attaching oligosaccharide-linked 'cargoes' to cellulose and other commercial polysaccharides via stable covalent bonds

The Equisetum enzyme hetero-trans-β-glucanase (HTG) covalently grafts native plant cellulose (donor-substrate) to xyloglucan (acceptor-substrate), potentially offering a novel 'green' method of cellulose functionalisation. However, the range of cellulosic and non-cellulosic donor substrates that can be utilised by HTG is unknown, limiting our insight into its biotechnological potential. Here we show that HTG binds all celluloses tested (papers, tissues, hydrogels, bacterial cellulose) to radioactively- or fluorescently-labelled xyloglucan-heptasaccharide (XXXGol; acceptor-substrate). Glycol-chitin, glycol-chitosan and chitosan also acted as donor substrates but less effectively than cellulose. Cellulose-XXXGol conjugates were formed throughout the volume of a block of hydrogel, demonstrating penetration. Plant-derived celluloses (cellulose Iβ) became more effective donor-substrates after 'mercerisation' in ≥3 M NaOH; the opposite was true for bacterial cellulose Iα. Cellulose-XXXGol bonds resisted boiling 6 M NaOH, demonstrating strong glycosidic bonding. In conclusion, HTG stably grafts native and processed celluloses to xyloglucan-oligosaccharides, which may carry valuable 'cargoes', exemplified by sulphorhodamine. We thus demonstrate HTG's biotechnological potential to modify various cellulose-based substrates such as textiles, pulps, papers, packaging, sanitary products and hydrogels.

Identification and characterization of two xyloglucan-specific endo-1,4-glucanases in Aspergillus oryzae

Aspergillus oryzae produces glycoside hydrolases to degrade xyloglucan. We identified and characterized two xyloglucan-specific endo-1,4-glucanases (xyloglucanases) named Xeg12A and Xeg5A. Based on their amino acid sequences, Xeg12A and Xeg5A were classified into glycoside hydrolase families GH12 and GH5, respectively. Xeg12A degrades tamarind seed xyloglucan polysaccharide into xyloglucan oligosaccharides containing four glucopyranosyl residues as main chains, including heptasaccharides (XXXG: Glc₄Xyl₃), octasaccharides (XXLG and XLXG: Glc₄Xyl₃Gal₁), and nonasaccharides (XLLG: Glc₄Xyl₃Gal₂). By contrast, Xeg5A produces various xyloglucan oligosaccharides from xyloglucan. Xeg5A hydrolyzes xyloglucan into not only XXXG, XXLG/XLXG, and XLLG but also disaccharides (isoprimeverose: Glc₁Xyl₁), tetrasaccharides (XX: Glc₂Xyl₂ and LG: Glc₂Xyl₁Gal₁), and so on. Xeg12A is a typical endo-dissociative-type xyloglucanase that repeats hydrolysis and desorption from xyloglucan. Conversely, Xeg5A acts as an endo-processive-type xyloglucanase that hydrolyzes xyloglucan progressively without desorption. These results indicate that although both Xeg12A and Xeg5A contribute to the degradation of xyloglucan, they have different modes of activity toward xyloglucan, and the hydrolysis machinery of Xeg5A is unique compared with that of other known GH5 enzymes. KEY POINTS: • We identified two xyloglucanases, Xeg12A and Xeg5A, in A. oryzae. • Modes of activity and regiospecificities of Xeg12A and Xeg5A were clearly different. • Xeg5A is a unique xyloglucanase that produces low-molecular-weight oligosaccharides.

Evaluation of a Product Containing Xyloglucan and Pea Protein on Skin Barrier Permeability

OBJECTIVE

The skin acts as a mechanical and protective barrier against viral, fungal, and bacterial infections. Skin conditions such as atopic dermatitis and psoriasis are characterized by alterations of the skin barrier, often caused by injury and by bacterial infections. In the last years, non-pharmacological interventions have gained great importance in epidermis-related diseases. Xyloglucan (XG) is a polysaccharide that possesses a "mucin-like" molecular structure that confers mucoadhesive properties, allowing XG-containing formulations to act as a protective barrier for the management of different diseases. Moreover, there is also increasing interest in the use of proteins due to their film-forming features. This study aimed to evaluate the barrier-protective properties of a product containing XG and pea protein (PP) in an in vitro model, assessing its effects on the membrane permeability of keratinocytes infected by Staphylococcus aureus.

METHODS

HaCaT keratinocytes were pretreated with XG and PP for 3 h and then infected with S. aureus cells (106 bacteria/well) at a multiplicity of infection of 10 for 1 h. The number of bacterial colonies and membrane integrity were measured, respectively.

RESULTS

We observed that pretreatment with XG and PP in human HaCaT keratinocytes infected with S. aureus significantly increased trans-epithelial electrical resistance (a marker of skin barrier function) measurement, reduced lucifer yellow (a marker of membrane integrity) permeation across the monolayer, and released lactate dehydrogenase (a marker of tissue damage). Moreover, XG and PP pretreatment was able to reduce bacterial adherence, avoiding S. aureus infection.

CONCLUSION

In summary, we demonstrated that the product containing XG and PP was able to maintain barrier permeability preserving its integrity, and therefore, it can be considered as an interesting approach for the management of epidermis-related diseases.

Xyloglucan based mucosal nanovaccine for immunological protection against brucellosis developed by supercritical fluid technology

Vaccines delivered via the mucosal route have logistic benefits over parenteral or intramuscular vaccines as they offer patient compliance. This study presents the first intranasal, controlled release, subunit nanovaccine comprising mucoadhesive tamarind seed polymer (xyloglucan) based nanoparticles produced using an efficient, environmentally compatible, and industrially scalable technique: rapid expansion of supercritical solution. The nanovaccine formulation aimed against brucellosis comprised xyloglucan nanoparticles loaded separately with antigenic acellular lipopolysaccharides from B. abortus (S19) and the immunoadjuvant quillaja saponin. The nanovaccine elicited prolonged humoral and cell-mediated immunity in female Balb/c mice. Nasal vaccination with the nanovaccine resulted in higher levels of mucosal IgA and IgG than with an aqueous solution of soluble lipopolysaccharides and quillaja saponin. Systemic immunity triggered by the nanovaccine was evidenced by higher IgG levels in sera post priming and boosting. The nanovaccine induced a mixed Th1/Th2 type of immunity with higher IgG2a levels and thus a polarized Th1 response. The results suggest that the nanovaccine administered by homologous nasal route can prime the immune system via the mucosal and systemic pathways and is a good candidate for vaccine delivery.

Automated Glycan Assembly of Plant Cell Wall Oligosaccharides

Synthetic cell wall oligosaccharides are promising molecular tools for investigating the structure and function of plant cell walls. Their well-defined structure and high purity prevents misinterpretations of experimental data, and the possibility to introduce chemical handles provides means for easier localization and detection. Automated glycan assembly as emerged has a powerful new method for the efficient preparation of oligosaccharide libraries. We recently made use of this technology to prepare a collection of plant cell wall glycans for cell wall research. In this chapter, detailed experimental procedures for the automated synthesis of oligosaccharides that are ready for use in biological assays are described.

Adsorption of xyloglucan and cellulose nanocrystals on natural fibres for the creation of hierarchically structured fibres

Green treatment of natural fibres is a major issue in paper, textile and biocomposites industries to design innovative and eco-friendly products. In this work, hierarchical structuring of flax woven fabrics by the adsorption of xyloglucan (XG) and cellulose nanocrystals (CNC) is studied. Indeed, CNC have high mechanical properties, high specific surface area and great potential for functionalization. The adsorption of XG and CNC has been investigated in terms of localization by confocal and scanning electron microscopy (SEM) and quantification through adsorption isotherms. Adhesion force measurements have also been performed by Atomic Force Microscopy (AFM). XG and CNC are homogeneously adsorbed on flax fabric and adsorption isotherms reach plateau values around 20 mg /g_fibres for both. The pre-adsorption of XG on flax fabric influences the amount of adsorbed CNC in the high concentrations and also creates entanglements and strong interactions between XG and CNC with the formation of an extensible network.

Heterologous expression of plant glycosyltransferases for biochemistry and structural biology

Much of the carbon captured by photosynthesis is converted into the polysaccharides that constitute plant cell walls. These complex macrostructures are composed of cellulose, hemicellulose, and pectins, together with small amounts of structural proteins, minerals, and in many cases lignin. Wall components assemble and interact with one another to produce dynamic structures with many capabilities, including providing mechanical support to plant structures and determining plant cell shape and size. Despite their abundance, major gaps in our knowledge of the synthesis of the building blocks of these polymers remain, largely due to ineffective methods for expression and purification of active synthetic enzymes for in vitro biochemical analyses. The hemicellulosic polysaccharide, xyloglucan, comprises up to 25% of the dry weight of primary cell walls in plants. Most of the knowledge about the glycosyltransferases (GTs) involved in the xyloglucan biosynthetic pathway has been derived from the identification and carbohydrate analysis of knockout mutants, lending little information on how the catalytic biosynthesis of xyloglucan occurs in planta. In this chapter we describe methods for the heterologous expression of plant GTs using the HEK293 expression platform. As a demonstration of the utility of this platform, nine xyloglucan-relevant GTs from three different CAZy families were evaluated, and methods for expression, purification, and construct optimization are described for biochemical and structural characterization.

A Group of O-Acetyltransferases Catalyze Xyloglucan Backbone Acetylation and Can Alter Xyloglucan Xylosylation Pattern and Plant Growth When Expressed in Arabidopsis

Xyloglucan is a major hemicellulose in plant cell walls and exists in two distinct types, XXXG and XXGG. While the XXXG-type xyloglucan from dicot species only contains O-acetyl groups on side-chain galactose (Gal) residues, the XXGG-type xyloglucan from Poaceae (grasses) and Solanaceae bears O-acetyl groups on backbone glucosyl (Glc) residues. Although O-acetyltransferases responsible for xyloglucan Gal acetylation have been characterized, the biochemical mechanism underlying xyloglucan backbone acetylation remains to be elucidated. In this study, we showed that recombinant proteins of a group of DUF231 members from rice and tomato were capable of transferring acetyl groups onto O-6 of Glc residues in cello-oligomer acceptors, indicating that they are xyloglucan backbone 6-O-acetyltransferases (XyBATs). We further demonstrated that XyBAT-acetylated cellohexaose oligomers could be readily xylosylated by AtXXT1 (Arabidopsis xyloglucan xylosyltransferase 1) to generate acetylated, xylosylated cello-oligomers, whereas AtXXT1-xylosylated cellohexaose oligomers were much less effectively acetylated by XyBATs. Heterologous expression of a rice XyBAT in Arabidopsis led to a severe reduction in cell expansion and plant growth and a drastic alteration in xyloglucan xylosylation pattern with the formation of acetylated XXGG-type units, including XGG, XGGG, XXGG, XXGG,XXGGG and XXGGG (G denotes acetylated Glc). In addition, recombinant proteins of two Arabidopsis XyBAT homologs also exhibited O-acetyltransferase activity toward cellohexaose, suggesting their possible role in mediating xyloglucan backbone acetylation in vivo. Our findings provide new insights into the biochemical mechanism underlying xyloglucan backbone acetylation and indicate the importance of maintaining the regular xyloglucan xylosylation pattern in cell wall function.

Xyloglucan as green renewable biopolymer used in drug delivery and tissue engineering

Xyloglucan is a mucoadhesive polysaccharide which is extracted from the cell wall of vascular plants. Tamarind seeds are the abundant source of xyloglucan and commercially more popular. It is biocompatible, biodegradable, and nontoxic in nature. It is approved by the FDA for use as a food additive, stabilizing and thickening agent or gelling agent. Recently, many researchers are giving attention to xyloglucan for drug delivery through various routes and regeneration of the number of tissues. However, the findings of tissue regeneration and drug delivery in combination are not collected and represented in a simple and comprehensive way. The aim of this review is to find and represent these missing links. This review presents current researches on xyloglucan in drug delivery and regeneration of tissue.

Identification of two functional xyloglucan galactosyltransferase homologs BrMUR3 and BoMUR3 in brassicaceous vegetables

Xyloglucan (XyG) is the predominant hemicellulose in the primary cell walls of most dicotyledonous plants. Current models of these walls predict that XyG interacts with cellulose microfibrils to provide the wall with the rigidity and strength necessary to maintain cell integrity. Remodeling of this network is required to allow cell elongation and plant growth. In this study, homologs of Arabidopsis thaliana MURUS3 (MUR3), which encodes a XyG-specific galactosyltransferase, were obtained from Brassica rapa (BrMUR3) to Brassica oleracea (BoMUR3). Genetic complementation showed that BrMUR3 and BoMUR3 rescue the phenotypic defects of the mur3-3 mutant. Xyloglucan subunit composition analysis provided evidence that BrMUR3 and BoMUR3 encode a galactosyltransferase, which transfers a galactose residue onto XyG chains. The detection of XXFG and XLFG XyG subunits (restoration of fucosylated side chains) in mur3-3 mutants overexpressing BrMUR3 or BoMUR3 show that MUR3 from Brassica to Arabidopsis are comparable as they add Gal to the third xylosyl residue of the XXXG subunit. Our results provide additional information for functional dissection and evolutionary analysis of MUR3 genes derived from brassicaceous species.