A nanochitosan-D-galactose formulation increases the accumulation of primaquine in the liver

Primaquine is the mainstream antimalarial drug to prevent Plasmodium vivax relapses. However, this drug can induce hemolysis in patients with glucose-6-phosphate dehydrogenase deficiency. Nanostructure formulations of primaquine loaded with D-galactose were used as a strategy to target the drug to the liver and decrease the hemolytic risks. Nanoemulsion (NE-Pq) and nanochitosan (NQ-Pq) formulations of primaquine diphosphate containing D-galactose were prepared and characterized by their physicochemistry properties. Pharmacokinetic and biodistribution studies were conducted using Swiss Webster mice. A single dose of 10 mg/kg of each nanoformulation or free primaquine solution was administered by gavage to the animals, which were killed at 0.5, 1, 2, 4, 8, and 24 hours. Blood samples and tissues were collected, processed, and analyzed by high-performance liquid chromatography. The nanoformulation showed sizes around 200 nm (NE-Pq) and 400 nm (NQ-Pq) and physicochemical stability for over 30 days. Free primaquine solution achieved higher primaquine Cmax in the liver than NE-Pq or NQ-Pq at 0.5 hours. However, the half-life and mean residence time (MRT) of primaquine in the liver were three times higher with the NQ-Pq formulation than with free primaquine, and the volume distribution was four times higher. Conversely, primaquine's half-life, MRT, and volume distribution in the plasma were lower for NQ-Pq than for free primaquine. NE-Pq, on the other hand, accumulated more in the lungs but not in the liver. Galactose-coated primaquine nanochitosan formulation showed increased drug targeting to the liver compared to free primaquine and may represent a promising strategy for a more efficient and safer radical cure for vivax malaria.

An Effective and Promising Strategy for Plant Protection: Synthesis of L-Carvone-Based Thiazolinone-Hydrazone/Nanochitosan Complexes with Antifungal Activity and Sustained Releasing Performance

The development of novel natural product-derived nano-pesticide systems with loading capacity and sustained releasing performance of bioactive compounds is considered an effective and promising plant protection strategy. In this work, 25 L-carvone-based thiazolinone-hydrazone compounds 4a~4y were synthesized by the multi-step modification of L-carvone and structurally confirmed. Compound 4h was found to show favorable and broad-spectrum antifungal activity through the in vitro antifungal activity evaluation of compounds 4a~4y against eight phytopathogenic fungi. Thus, it could serve as a leading compound for new antifungal agents in agriculture. Moreover, the L-carvone-based nanochitosan carrier 7 bearing the 1,3,4-thiadiazole-amide group was rationally designed for the loading and sustained releasing applications of compound 4h, synthesized, and characterized. It was proven that carrier 7 had good thermal stability below 200 °C, dispersed well in the aqueous phase to form numerous nanoparticles with a size of~20 nm, and exhibited an unconsolidated and multi-aperture micro-structure. Finally, L-carvone-based thiazolinone-hydrazone/nanochitosan complexes were fabricated and investigated for their sustained releasing behaviors. Among them, complex 7/4h-2 with a well-distributed, compact, and columnar micro-structure displayed the highest encapsulation efficiency and desirable sustained releasing property for compound 4h and thus showed great potential as an antifungal nano-pesticide for further studies.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

Fabrication and assessment of potent anticancer nanoconjugates from chitosan nanoparticles, curcumin, and eugenol

In cancer management and control, the most challenging difficulties are the complications resulting from customized therapies. The constitution of bioactive anticancer nanoconjugates from natural derivatives, e.g., chitosan (Ct), curcumin (Cur), and eugenol (Eug), was investigated for potential alternatives to cancer cells' treatment. Ct was extracted from Erugosquilla massavensis (mantis shrimp); then, Ct nanoparticles (NCt) was fabricated and loaded with Cur and/or Eug using crosslinking emulsion/ionic-gelation protocol and evaluated as anticancer composites against CaCo2 "colorectal adenocarcinoma" and MCF7 "breast adenocarcinoma" cells. Ct had 42.6 kDa molecular weight and 90.7% deacetylation percentage. The conjugation of fabricated molecules/composites and their interactions were validated via infrared analysis. The generated nanoparticles (NCt, NCt/Cur, NCt/Eug, and NCt/Cur/Eug composites) had mean particle size diameters of 268.5, 314.9, 296.4, and 364.7 nm, respectively; the entire nanoparticles carried positive charges nearby ≥30 mV. The scanning imaging of synthesized nanoconjugates (NCt/Cur, NCt/Eug, and NCt/Cur/Eug) emphasized their homogenous distributions and spherical shapes. The cytotoxic assessments of composited nanoconjugates using the MTT assay, toward CaCo2 and MCF7 cells, revealed elevated anti-proliferative and dose-dependent activities of all nanocomposites against treated cells. The combined nanocomposites (NCt/Eug/Cur) emphasized the highest activity against CaCo2 cells (IC₅₀ = 11.13 μg/ml), followed by Cur/Eug then NCt/Cur. The exposure of CaCo2 cells to the nanocomposites exhibited serious DNA damages and fragmentation in exposed cancerous cells using the comet assay; the NCt/Eug/Cur nanocomposite was the most forceful with 9.54 nm tail length and 77.94 tail moment. The anticancer effectuality of innovatively combined NCt/Cur/Eug nanocomposites is greatly recommended for such biosafe, natural, biocompatible, and powerful anticancer materials, especially for combating colorectal adenocarcinoma cells, with elevated applicability, efficiency, and biosafety.

Effect of Pectin/Nanochitosan-Based Coatings and Storage Temperature on Shelf-Life Extension of "Elephant" Mango (Mangifera indica L.) Fruit

The aim of extending shelf-life and maintaining quality is one of the major issues regarding mango fruit preservation. The quality of mango fruits is greatly affected by postharvest factors, especially temperature and fruit treatment. In this study, the effect of coating and storage temperature on the characteristics of mango fruits was investigated. The mango fruits were immersed in different concentrations (1.5%, 2.0%, and 2.5%) of pectin/nanochitosan dispersion (with ratios of pectin:nanochitosan 50:50), and (0.75%, 1% and 1.25%) of nanochitosan dispersion and stored at 17, 25, and 32 °C for 24 days. Changes in fruit, including weight loss, firmness, color, chemical composition (such as the total soluble solids concentration (TSS)), total sugar, reducing sugar, titratable acidity (TA), and vitamin C were periodically recorded. The results indicated that the pectin/nanochitosan coating significantly prevented reductions in the fruit weight, firmness, TSS, TA, and vitamin C content. Additionally, pectin/nanochitosan at a low temperature (17 °C) had a greater positive effect on fruit shelf-life and weight maintenance than 25 and 32 °C. The coated mango fruits maintained good quality for 24 days at 17 °C, while coated fruits stored at 25 °C and 32 °C, as well as uncoated ones stored at 17 °C, were destroyed after two weeks. At the maximum storage time evaluated, the coating formulations containing pectin and nanochitosan exhibited microbial counts below the storage life limit of 10⁶ CFU/g of fruit. In general, the results showed that the pectin/nanochitosan coating (2%) with a storage temperature of 17 °C is the most effective strategy for improving quality and extending the shelf-life of mango fruits.

Evaluating the Anticarcinogenic Activity of Surface Modified/Functionalized Nanochitosan: The Emerging Trends and Endeavors

Chitosan begins its humble journey from marine food shell wastes and ends up as a versatile nutraceutical. This review focuses on briefly discussing the antioxidant activity of chitosan and retrospecting the accomplishments of chitosan nanoparticles as an anticarcinogen. The various modified/functionalized/encapsulated chitosan nanoparticles and nanoforms have been listed and their biomedical deliverables presented. The anticancer accomplishments of chitosan and its modified composites have been reviewed and presented. The future of surface modified chitosan and the lacunae in the current research focus have been discussed as future perspective. This review puts forth the urge to expand the scientific curiosity towards attempting a variety of functionalization and surface modifications to chitosan. There are few well known modifications and functionalization that benefit biomedical applications that have been proven for other systems. Being a biodegradable, biocompatible polymer, chitosan-based nanomaterials are an attractive option for medical applications. Therefore, maximizing expansion of its bioactive properties are explored. The need for applying the ideal functionalization that will significantly promote the anticancer contributions of chitosan nanomaterials has also been stressed.

Capsule Independent Antimicrobial Activity Induced by Nanochitosan against Streptococcus pneumoniae

Background: Streptococcus pneumoniae remains a major cause of community-acquired pneumonia, meningitis, and other diseases, contributing significantly to high morbidity and mortality worldwide. Although it responds to antibiotics, their use is becoming limited due to the rise in antibiotic resistance, which necessitates the development of new therapeutics. Nanotechnology is used to counteract antimicrobial resistance. In this regard, polymeric nanoparticles (NPs) made of natural, biodegradable, biocompatible, and cationic polymers such as Chitosan (CNPs) exhibit wide-spectrum antimicrobial activity. Therefore, this study aimed to prepare CNPs, characterize their physiochemical characteristics: particle size (PZ), polydispersity index (PDI), and zeta potential (ZP), and investigate their antimicrobial activity against Streptococcus pneumoniae TIGR4 (virulent serotype 4) and its capsular mutant (∆cps). Methods: CNPs were prepared at 1, 2.5, and 5 mg/mL concentrations using the ion gelation method. Then, PZ, PDI, and ZP were characterized using a Zetasizer. Transmission electron microscopy (TEM) was used to visualize the CNP’s morphology. Broth and agar dilution methods were used to assess their antimicrobial activity. Cytotoxicity of prepared NPs on A549 cells and their effect on pneumococcal hemolysis were also investigated. Results: Spherical CNPs were produced with PZ ranging from 133.3 nm ± 0.57 to 423 nm ± 12.93 PDI < 0.35, and ZP from 19 ± 0.115 to 27 ± 0.819. The prepared CNPs exhibited antibacterial activity against TIGR4 and its capsule mutant with a minimum inhibitory concentration (MIC90) of 0.5 to 2.5 mg/mL in a non-acidic environment. The hemolysis assay results revealed that CNPs reduced bacterial hemolysis in a concentration-dependent manner. Their mammalian cytotoxicity results indicated that CNPs formed from low concentrations of Chitosan (Cs) were cytocompatible. Conclusion: Nanochitosan particles showed anti-pneumococcal activity regardless of the presence of capsules. They resulted in a concentration-dependent reduction in bacterial hemolysis and were cytocompatible at a lower concentration of Cs. These findings highlight the potential of CNPs in the treatment of pneumococcal diseases.

Radioprotective effect of a novel and green bio-nanohybrid, chitosan/silver/cobalt complex, based on Ferulago angulate plant

A novel bio-nanocomposite was developed by incorporating the extracted nanochitosan from shrimp wastes with Schiff base cobalt complex (Chit-Co complex). The phytosynthesis of Chit-Co complex/Ag bio-nanocomposite was designed utilizing Chit-Co complex at the presence of Ferulago angulate extraction and characterized by AFM, SEM, EDAX, TEM, FT-IR, and elemental analysis. The radioprotective application of this bio-nanocomposite on human lymphocyte cells was evaluated using micronucleus (MN) assay. Total antioxidant activities of it were evaluated using FRAP and DPPH assays. Chit-Co complex/Ag bio-nanocomposite significantly decreased the frequency of micronuclei in human lymphocytes exposed to ionization irradiation (IR). The highest protection was observed at 200 μg/ml. Also, maximum antioxidant activities of bio-nanocomposite were provided at the same dose. These data exhibit the radioprotective effect of a bio-nanocomposite based on wastes of living organisms can be an excellent radioprotective agent, which can protect the normal cells of human against the genetic damage by IR.

Nanochitosan: Commemorating the Metamorphosis of an ExoSkeletal Waste to a Versatile Nutraceutical

Chitin (poly-N-acetyl-D-glucosamine) is the second (after cellulose) most abundant organic polymer. In its deacetylated form-chitosan-becomes a very interesting material for medical use. The chitosan nano-structures whose preparation is described in this article shows unique biomedical value. The preparation of nanochitosan, as well as the most vital biomedical applications (antitumor, drug delivery and other medical uses), have been discussed in this review. The challenges confronting the progress of nanochitosan from benchtop to bedside clinical settings have been evaluated. The need for inclusion of nano aspects into chitosan research, with improvisation from nanotechnological inputs has been prescribed for breaking down the limitations. Future perspectives of nanochitosan and the challenges facing nanochitosan applications and the areas needing research focus have been highlighted.

A review study about the effect of chitosan nanocarrier on improving the efficacy of amphotericin B in the treatment of leishmania from 2010 to 2020

In the present review study, the published articles from 2010-2020 that evaluated the effect of chitosan nanocarrier on the amphotericin B (AmB) efficacy in the treatment of leishmaniasis, have been considered. Leishmania is a parasitic tropical disease in the world and is treated with AmB as one of the main therapeutic agent. However, clinical application of AmB is limited due to its toxicity and insolubility issues. Using nanoparticles and in particular chitosan nanocarrier seems a promising approach to overcome these problems. Therefore, various doses of AmB have been loaded in chitosan nanoparticles in different studies and the results of these studies demonstrated that by increasing the drug loading efficiency and decreasing the toxicity, the potency of the nanoformulation to inhibit and killing the parasite is increased. In this regard, the results of a study performed in 2018, demonstrated that chitosan nanoparticles with the higher dose of drug loading were the most effective formulation to inhibit and kill the parasite. Thus, chitosan nanocarrier can consider as an appropriate candidate in the future to inhibit and kill the leishmania parasite without causing side effects.

Amalgamation and application of nano chitosan cross-linked with fish scales based activated carbon as an adsorbent for the removal of reactive dye (RB9)

The extensive discomfort in the expulsion of toxic pollutants even at mild concentrations has demanded the need for prompt methods for the evacuation of dyes and heavy metals. The effective method for depuration of dye from the effluent is by sorption. Chitosan is a bio-polymer which is gaining an increasing interest as one of the sorbents. It was obtained from the crab shells by undergoing several chemical processes and used as an adsorbent for dye, metal removal and also for pharmaceutical purposes. Cross linking it with other co polymers will increase the capacity of adsorption to a maximum level. Fish scales are considered to be a major waste in the food industry and since it takes a long time for decomposing it is considered to be one of the pollutants. Hence it is utilised by converting it into activated carbon by preliminary treatment and into a muffle furnace. The obtained activated carbon is combined with chitosan by using a cross linker and utilised for adsorption mechanism. To analyse the effect of chitosan cross linked with activated carbon obtained from fish scales in adsorption of dye Reactive Blue 9 (RB9) to evaluate the adsorption studies, kinetics, mass transfer studies, thermodynamics of the bio adsorbent.

Characteristics and Antimicrobial Properties of Active Edible Films Based on Pectin and Nanochitosan

This study was aimed at creating new films and determine some functional packaging properties of pectin:nanochitosan films with ratios of pectin:nanochitosan (P:NSC) of 100:0; 75:25; 50:50; 25:75 and 0:100 (%w/w). The effects of the proportions of pectin:nanochitosan incorporation on the thickness, mechanical properties, water vapor permeability, water-solubility, and oxygen permeability were investigated. The microstructural studies were done using scanning electron microscopy (SEM). The interactions between pectin and nanochitosan were elucidated by Attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results showed that the blending of pectin with nanochitosan at proportions of 50:50 increased the tensile strength to 8.96 MPa, reduced the water solubility to 37.5%, water vapor permeability to 0.2052 g·mm/m²·day·kPa, and the oxygen permeability to 47.67 cc·mm/m²·day. The results of the contact angle test indicated that P:NCS films were hydrophobic, especially, pectin:nanochitosan films inhibited the growth of Colletotrichum gloeosporioides, Saccharomyces cerevisiae, Aspergillus niger, and Escherichia coli. So, P:NCS films with a proportion of 50:50 can be used as active films to extend the shelf life of food.

Nanotechnology interventions in aquaculture and seafood preservation

The inclusion of nanotechnologies in aquaculture and seafood preservation confronts a new edge that deserves attention in the recent trends of global food sector. Nanotechnology, being a novel and innovative approach has paved way to open up new perspective for the analysis of biomolecules, targeted drug delivery, protein or cells, clinical diagnosis, development of non-viral vectors for gene therapy, as transport vehicle for DNA, disease therapeutics etc. The current and potential use of nanotechnology would show the way to progression of smart and high performing fish. The comparative evaluation of extremely sophisticated nanotechnology with conventional process engineering proposes new prospectus in technological developments for superior water and wastewater technology processes. Nanoparticles have comprehensive advantages for management of drugs as liberation of vaccines and therefore hold the assurance for civilized protection of farmed fish against disease-causing pathogens. This review article explores the present concerns of food security, climate change as well as sustainability that are explored by the researchers in the area of nanotechnology, development of marine produce, along with its preservation and aquaculture.

Uptake of Pb(II) onto nanochitosan/sodium alginate hybrid beads: Mechanism and kinetics study

Nanochitosan/sodium alginate (NCS/SA) beads were prepared using nanochitosan and alginate as a high-performance absorbent for Pb(II) removal from aqueous solution. The morphology, structure, thermal stability, surface area, and elements present in the NCS/SA beads before and after adsorption were characterized using instrumental techniques like SEM, FTIR, TGA, BET, and EDX analysis, respectively. Various adsorption parameters were studied. The results indicated that the equilibrium adsorption data were fitted to Langmuir isotherms and the maximum Langmuir monolayer capacity of Pb(II) was 178.57 mg/g at 45°C. The adsorption process was in good agreement with pseudo-first-order kinetic model. Mechanism studies showed that electrostatic interaction and ion exchange were the major mechanisms for lead (II) removal by the NCS/SA beads. The results of this study indicate that NCS/SA beads could be used as an effective adsorbent for the elimination of lead (II) present in aqueous solution. PRACTITIONER POINTS: Nanochitosan/sodium alginate beads were synthesized using Ca²⁺ as a crosslinking agent. NCS/SA beads were used to remove Pb(II) for the first time and working parameters were optimized. Adsorption monolayer capacity of NCS/SA adsorbent towards Pb (II) was found to be 178.57 mg/g.

Novel nano-sized chitosan amphotericin B formulation with considerable improvement against Leishmania major

AIM

Improvement in the treatment of Leishmania major's pathological effects through increasing the dose of amphotericin B loaded into nanochitosan.

MATERIALS & METHODS

The phase separation method was used for nanochitosan synthesis and amphotericin loading. Also a novel solvent was designed and the nanodrug efficacy was evaluated in vitro and in vivo (pathology) environments.

RESULTS

The drug loading efficiency of 90%, along with slow drug-release with cellular uptake of 98.6% was achieved. The novel solvent was composed of 10% acetic acid, and it was succeeded to dissolve AK10 mg/kg. Also, AK10 mg/kg had no side effects in in vitro and in vivo environments. In addition, the complete wound healing and parasite inhibition were achieved by using AK10 mg/kg in terms of improvement the treatment indicators.

CONCLUSION

Increasing the therapeutic dose of AK to 10 mg/kg caused the successful treatment of L. major's pathological effects in in vitro and in vivo environments.

Nanomaterials in the application of tumor vaccines: advantages and disadvantages

Tumor vaccines are a novel approach to the treatment of malignancy, and are attracting the attention of the medical profession. Nanomaterials have significant advantages in the preparation of a tumor vaccine, including their ability to penetrate and target cancer tissue and their antigenic properties. In this review, we focus on several nanomaterials, ie, carbon nanotubes, nanoemulsions, nanosized aluminum, and nanochitosan. Applications for these nanomaterials in nanovaccines and their biological characteristics, as well as their potential toxicity, are discussed.