Development of a Novel Model for the Assessment of Dead-Space Management in Soft Tissue

Following extensive surgical debridement in the treatment of infection, a “dead space” can result following surgical closure that can fill with hematoma, an environment conducive to bacterial growth. The eradication of dead space is essential in order to prevent recurrent infection. This study describes a novel small animal model to investigate dead-space management in muscle tissue. Two absorbable test materials were implanted in each animal; beads of calcium sulfate alone, and beads loaded with vancomycin and tobramycin. In-life blood samples and radiographs were taken from each animal following implantation. Animals were sacrificed at 1, 7, 21, 42, and 63 days post-operatively (n = 4), and implant sites were analysed by micro-computed tomography, histology and immunohistochemistry. Complete resorption was confirmed radiographically at 3 weeks post-implantation. Histologically, the host tissue response to both materials was identical, and subsequent healing at the implant sites was observed with no dead space remaining. Vancomycin was not detected in blood serum. However, peak tobramycin levels were detected in all animals at 6 hours post-implantation with no detectable levels in any animals at 72 hours post implantation. Serological inflammatory cytokine expression for IL-6, TNF-α and IL-1β indicated no unusual inflammatory response to the implanted materials or surgical procedure. The model was found to be convenient and effective for the assessment of implant materials for management of dead space in muscle tissue. The two materials tested were effective in resolving the surgically created dead space, and did not elicit any unexpected adverse host response.

Antibacterial activity of chitosan-based matrices on oral pathogens

Chitosan is a well sought-after polysaccharide in biomedical applications due to its biocompatibility, biodegradability to non-toxic substances, and ease of fabrication into various configurations. However, alterations in the anti-bacterial properties of chitosan in various forms is not completely understood. The objective of this study was to evaluate the anti-bacterial properties of chitosan matrices in different configurations against two pathogens-Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans. Two-dimensional (2-D) membranes and three-dimensional (3-D) porous scaffolds were synthesized by air drying and controlled-rate freeze drying. Matrices were suspended in bacterial broths with or without lysozyme (enzyme that degrades chitosan). Influences of pore size, blending with Polycaprolactone (PCL, a synthetic polymer), and neutralization process on bacterial proliferation were studied. Transient changes in optical density of the broth, adhesion characteristics, viability, and contact-dependent bacterial activity were assessed. 3-D porous scaffolds were more effective in reducing the proliferation of S. mutans in suspension than 2-D membranes. However, no significant differences were observed on the proliferation of A. actinomycetemcomitans. Presence of lysozyme significantly increased the antibacterial activity of chitosan against A. actinomycetemcomitans. Pore size did not affect the proliferation kinetics of either species, with or without lysozyme. NaOH neutralization of chitosan increased bacterial adhesion whereas ethanol neutralization inhibited adhesion without lowering proliferation. Mat culture tests indicated that chitosan does not allow proliferation on its surface and it loses antibacterial activity upon blending with PCL. Results suggest that the chemical and structural characteristics of chitosan-based matrices can be manipulated to influence the interaction of different bacterial species.

An evaluation of bacterial contamination of barriers used in periapical tissue regeneration: Part 2--Bacterial penetration

OBJECTIVE

To compare the relative penetration of Prevotella melaninogenica and Enterococcus faecalis through 3 guided tissue regeneration membranes: Atrisorb, Lambone, and OsseoQuest. It was hypothesized that OsseoQuest would show increased bacterial penetration when compared to Lambone and Atrisorb.

METHOD AND MATERIALS

Centrifuge tubes containing trypticase soy broth were sealed with circular sections of membranes and placed in test tubes containing culture media. The bacterial penetration was assessed by passage of bacteria from the outer tube culture media to the inner centrifuge tube media through the membrane. After incubation for 4 and 48 hours, the media from the outer and inner tubes were compared for bacterial count.

RESULTS

P melaninogenica exhibited 91% penetration for Lambone in 2 days, while OsseoQuest displayed 87% penetration with E faecalis in the same time. Atrisorb displayed a minimal penetration with both bacteria (2%).

CONCLUSION

Atrisorb displayed the least bacterial penetration, which may be attributed to membrane structure, chemical configuration, hydrophobicity, and porosity of tested membranes.

Microbiologic and Histologic Assessment of Intentional Bacterial Contamination of Bone Grafts

PURPOSE

The purpose of this study was to investigate methods of removing pathogenic micro-organisms from bone grafts that have been contaminated during surgery.

MATERIALS AND METHODS

Femora were removed from Sprague-Dawley rats and were divided into sections and contaminated in solutions of the bacteria Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. Contaminated bone specimens in each group were immersed in various solutions for specified periods so their antibacterial effects could be evaluated. After these procedures were performed, bone specimens were cultured in nutrient media. Bone structure was evaluated, and the appropriate decontamination method was selected.

RESULTS

Solutions such as povidone-iodine, neomycin, cephazolin sodium, and rifamycin were found to be effective decontaminants. These solutions did not damage the bone structure. Among these solutions, only rifamycin was effective against all bacteria used in this study to contaminate bone grafts.

CONCLUSIONS

Rifamycin seems to be the most suitable agent for the elimination of contamination introduced into bone grafts during surgery.

The bacteriostatic properties of ear tubes made of absorbable polylactic acid

OBJECTIVE

Tympanostomy tube placement remains the most common reason children are brought to the operating room. Of the known complications, transient, recurrent, and chronic otorrhea represent the most common and challenging sequelae of tube insertion. This study was performed to determine if the acidic nature of the polymer of lactic acid (PLA), a possible material for the construction of ear tubes, would have bacteriostatic properties.

MATERIAL AND METHODS

Experimental PLA tubes and control fluoroplastic tubes were inoculated with a broth of Pseudomonas aeruginosa or Staphylococcus aureus and incubated. Fluid recovered from the tubes was plated and incubated again. Colony counts were recorded at 24 and 48 h. Two separate trials were conducted for each organism. Repeated measures analysis of variance (ANOVA) models were used to assess the effects of the type of tube, the experimental run, and the tube by run interaction on colony counts.

RESULTS

In the Pseudomonas experiments, the mean colony count of the PLA tube group (Run 1: 1.0; Run 2: 26.6) was significantly lower than the mean colony count in the fluoroplastic tube group (Run 1: 132.6; Run 2: 122.2; p=0.0150). Similarly, in the S. aureus experiments, the mean colony count of the PLA tube group (Run 1: 88.2; Run 2: 92.6) was significantly lower than the mean colony count in the fluoroplastic tube group (Run 1: 335.0; Run 2: 325.8; p<0.0001).

CONCLUSION

PLA has many properties including an apparent bacteriostatic quality, which may make it an attractive material for the construction of tympanostomy tubes.

Efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to Staphylococcus aureus

Impregnation of antimicrobial agents within biodegradable orthopedic implants provides a possibility for local antimicrobial prophylaxis of biomaterial-related infections. The objective of this study was to evaluate the efficacy of a bioabsorbable ciprofloxacin containing bone screw (Ab-PLGA) in the prevention of biomaterial-related infection due to Staphylococcus aureus in a rabbit model. Animals in Group I (n=8) received a Ab-PLGA screw contaminated with S. aureus, while animals in Group II (n=8) received a stainless steel (SS) screw contaminated with S. aureus. In two negative control groups, the animals received a Ab-PLGA screw (Group III, n=4) or a SS screw (Group IV, n=4) without bacterial contamination. 18F-FDG-PET imaging, performed at 6 weeks, was applied as a novel quantitative in vivo imaging modality of implant-related infection. Infection was verified by swab cultures, direct cultures of the retrieved implant, and quantitative cultures of pulverized bone. The concentrations of ciprofloxacin in serum and local bone tissue were determined by a high performance liquid chromatographic (HPLC) method with fluorescence (FLD) detection. In the group of contaminated Ab-PLGA screws, all cultures were negative. In the group of contaminated SS screws, all cultures of retrieved implants and six cultures out of eight of pulverized bone were positive for inoculated S. aureus. In negative control groups, all cultures were negative except one contaminant (S. cohnii) found in a SS screw culture. Verified infection of contaminated SS screws was collaborated by the increased 18F-FDG-PET uptake (P=0.004 compared with the group of contaminated Ab-PLGA screws). The mean bone tissue concentration of ciprofloxacin varied from 2.54 to 0.83 microg/g bone as a function of distance from the implantation site. The serum concentration of ciprofloxacin remained undetectable and below the resolution of the analytic method (<5.0 ng/ml). This study confirmed the in vivo efficacy of bioabsorbable antibiotic containing bone screw in the prevention of biomaterial-related infection due to S. aureus.

Species-dependent premature degradation of absorbable suture materials caused by infection – Impact on the choice of thread in vascular surgery

Background: In case of infection after vascular reconstruction, preference is often given to absorbable suture material with the aim of preventing persistence of infection. We have investigated the functional deficit of absorbable sutures on incubation with various different bacteria. Material and methods: Four suture materials – Dexon bicolor®, Vicryl®, Maxon® and PDS II® – were placed in contact with reference bacterial cultures (Staphylococcus aureus, Pseudomonas aeroginosa, E. coli, coagulase-negative staphylococci and Proteus mirabilis). The bacteria were incubated for 7 days at 37°C, together with the suture material. A logarithmic phase (Group A) and a static phase (Group B) were simulated. The linear tensile strength (LTS) of the suture material was measured (Instron Tensiometer). Results: In the case of Staphylococcus aureus, a significant decrease in LTS was established for Dexon bicolor® (group A: 31%, group B: 22%), and Vicryl® (53% and 43%), but not for the monofilament threads. With regard to the other bacteria, a considerably more dramatic effect was observed: in both groups the braided sutures had completely disintegrated after 7 days. The monofilament sutures also revealed a significant loss of function (Maxon®: 88%, PDS II® 66%). Conclusions: The absorbable sutures revealed a premature, species-dependent loss of function due to the presence of the bacteria. On the basis of our results, the use of absorbable threads for vessel sutures in case of infection cannot be recommended, with the exception of monofilament material in a monocultural Staphylococcus aureus infection.

Bacterial adherence to silver nitrate coated poly-L-lactic acid urological stents in vitro

The purpose of this study was to see whether it is possible to prevent bacterial adherence to bioabsorbable self-reinforced L-lactic acid polymer (SR-PLLA) urological stents. The SR-PLLA stents were coated with silver nitrate blended epsilon-caprolactone/L-lactide copolymer. The adherence of five bacterial strains (Pseudomonas aeruginosa, Enterococcus faecalis, Proteus mirabilis and two strains of Escherichia coli) to coated and non-coated SR-PLLA wires were tested. It was found that silver nitrate coating prevented the adherence of bacteria (except E. faecalis) to SR-PLLA stents. The preventive effect correlated with the silver nitrate concentration. It was also found that silver nitrate coating reduced the amount of bacteria in ambient urine. In conclusion, silver nitrate coating may reduce stent-associated bacterial infections by preventing the adherence of bacteria. Further studies are needed to confirm its efficacy and safety in clinical practice.

The influence of sulfate-reducing bacteria colonization of 2 different bioresorbable barrier membranes for GTR. An 18-month case-controlled microbiologic and clinical study

The purpose of the present microbiologic and case-controlled clinical study was to examine the colonization of 2 different resorbable barrier membranes by sulfate-reducing bacteria (SRB). The barrier membranes tested were Guidor matrix barrier and Resolut regenerative material. Ten patients exhibiting 3 Class II furcation defects and 7 intrabony defects were included in the study. The probing depth and the clinical attachment level at 4 surfaces per tooth were taken at the beginning of the study. Microbiologic samples were taken from the experimental sites and from the approximal sites of the adjacent teeth. Both types of resorbable membranes were positive for SRB colonization. The detection of SRB in 2 of 7 intrabony defects and in all defects with furcation involvement before the membrane placement indicated that these organisms are a common inhabitant of sites showing periodontal destruction and are associated with guided tissue regeneration (GTR). According to the clinical criteria for healing tendencies used in this study, the GTR procedures were less successful in the presence of SRB. There were no significant clinical effects of different resorbable membrane materials or membrane layout on attachment level changes for either the intrabony defect or furcation groups after 18 months. There were no statistical differences for sites that became exposed to SRB when compared to sites that remained unexposed after 18 months. The numeric significance of SRB in relation to the total microbial count needs to be determined to gain insight into the ecologic role of membrane resorption rates.

Adherence of periodontopathic bacteria to bioabsorbable and non-absorbable barrier membranes in vitro

Guided tissue regeneration (GTR) techniques are increasingly used for the treatment of periodontal defects, or in conjunction with dental implant procedures. As adhesion of bacteria to barrier membranes used in these techniques may lead to failure, a prerequisite for treatment success is an infection-free healing process. The present study examined the adhesion of 3 periodontal pathogenic bacteria: Actinobacillus actinomycetemcomitans, Treponema denticola and Porphyromonas gingivalis, to 3 barrier membranes: Collagen, (Biomend) PTFE, (TefGen-FD) and e-PTFE, (Gore-Tex). The membranes were incubated with 3[H]-thymidine labeled bacteria, and the number of adherent bacteria was calculated using a scintillation counter. The effect of albumin coating on bacterial adherence to the membranes was also studied. Bacterial adherence to the membranes was further examined by scanning electron microscopy (SEM). The results show that the adherence of all bacterial strains to collagen membranes was significantly higher than to the other membranes tested. Precoating of the membranes with albumin did not change the bacterial adherence significantly. These findings are of importance in evaluating the ability of periodontal bacteria to colonize and infect different types of barrier membranes.

Early bacterial accumulation on guided tissue regeneration membrane materials. An in vivo study

The aim of the study was to compare the in vivo early bacterial plaque colonization of 3 different guided tissue regeneration (GTR) membrane materials using a morphological (scanning electron microscope) method. Rectangular-shaped strips were cut from 3 periodontal membranes (expanded polytetrafluoroethylene, polyglactin 910, and polylactic acid) and glued to the buccal aspect of removable acrylic devices, which were applied to the molar-premolar region of the upper quadrants in 8 dental students. Each device held 3 strips: one ePTFE, one polyglactin 910, and one polylactic acid. The surface roughness of each membrane material was measured by means of a laser profilometer. During a 24-hour period, the students had to refrain from any oral hygiene procedures and did not use chlorhexidine mouthrinses. In each subject, one device was removed after 4 hours and the other after 24 hours. After removal, the devices were placed in a 2.5% gluteraldehyde solution to fix the membranes, which were then processed for SEM analysis. Fifty-four microscopic fields (at 200x magnification) were randomly selected and analyzed in each strip. Magnification was increased to determine the presence of bacterial morphotypes. The presence or absence of bacteria was assessed in a binomial fashion. In such a system, the field was bacteria-positive when bacteria constituted the deposits covering the surface of the membrane. The microscopic field was considered bacteria-negative when no bacteria were present. Bacteria-positive fields showing rods and filaments as prevalent bacterial morphotypes were recorded as rod-positive fields. A different pattern of plaque accumulation was demonstrated on different membrane materials. The 4-hour results indicated a statistically significant difference (P = 0.008, ANOVA) in the proportion of bacteria-positive fields among the 3 membranes; a greater amount of bacteria was demonstrated on the ePTFE membrane compared to the other 2 membranes. At 24 hours, the difference in the proportion of bacteria-positive fields was statistically significant (P = 0.002, ANOVA); a lesser amount of bacterial plaque was present on the polylactic acid membrane compared to the ePTFE and polyglactin 910 membranes. No difference in the proportion of rod/bacteria-positive fields was demonstrated among the 3 membranes at either 4 or 24 hours. It was concluded that quantitative differences in early plaque accumulation on various membranes seem to be related to the textural and structural characteristics of the surface, which is not adequately represented by the surface Ra value measured with a profilometric instrument.