Human genetics of diabetic nephropathy

Diabetic vascular complications (DVCs) affecting several important organ systems of human body such as cardiovascular system contribute a major public health problem. Genetic factors contribute to the risk of diabetic nephropathy (DN). Genetics variants, structural variants (copy number variation) and epigenetic changes play important roles in the development of DN. Apart from nucleus genome, mitochondrial DNA (mtDNA) plays critical roles in regulation of development of DN. Epigenetic studies have indicated epigenetic changes in chromatin affecting gene transcription in response to environmental stimuli, which provided a large body of evidence of regulating development of diabetes mellitus. This review focused on the current knowledge of the genetic and epigenetic basis of DN. Ultimately, identification of genes or genetic loci, structural variants and epigenetic changes contributed to risk or protection of DN will benefit uncovering the complex mechanism underlying DN, with crucial implications for the development of personalized medicine to diabetes mellitus and its complications.

Medical genetics-based drug repurposing for Alzheimer's disease

Alzheimer's disease (AD) is a disease that threatens the elderly. No efficient therapeutic method is currently available to combat AD. Drug repurposing has provided a new route for AD drug discovery, and medical genetics has shown potential in target-based drug repurposing. We compared AD-associated genes with approved drug targets and found that three are targeted by 23 approved drugs. Thus, these drugs may be used to treat AD according to the medical genetic information of the targets. In vitro and in vivo experiments revealed that four drugs, all of which are angiotensin-converting enzyme (ACE) inhibitors, had potential to treat AD.

Transverse coupling property of beam from ECR ion sources

Experimental evidence of the property of transverse coupling of beam from Electron Cyclotron Resonance (ECR) ion source is presented. It is especially of interest for an ECR ion source, where the cross section of extracted beam is not round along transport path due to the magnetic confinement configuration. When the ions are extracted and accelerated through the descending axial magnetic field at the extraction region, the horizontal and vertical phase space strongly coupled. In this study, the coupling configuration between the transverse phase spaces of the beam from ECR ion source is achieved by beam back-tracking simulation based on the measurements. The reasonability of this coupling configuration has been proven by a series of subsequent simulations.

Studies on a Q/A selector for the SECRAL electron cyclotron resonance ion source

Electron cyclotron resonance ion sources are widely used in heavy ion accelerators in the world because they are capable of producing high current beams of highly charged ions. However, the design of the Q/A selector system for these devices is challenging, because it must have a sufficient ion resolution while controlling the beam emittance growth. Moreover, this system has to be matched for a wide range of ion beam species with different intensities. In this paper, research on the Q/A selector system at the SECRAL (Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou) platform both in experiment and simulation is presented. Based on this study, a new Q/A selector system has been designed for SECRAL II. The features of the new design including beam simulations are also presented.

Synergistic inhibitory effect of berberine and d-limonene on human gastric carcinoma cell line MGC803

This study aims at evaluating the anticancer effects of berberine hydrochloride (berberine) and d-limonene, alone and in combination, on human gastric carcinoma cell line MGC803 to determine whether berberine and d-limonene work synergistically and elucidate their mechanisms. MGC803 cells were treated with berberine and d-limonene, alone and in combination, for 24-48 h. The inhibitory effects of these drugs on growth were determined by MTT assay. The combination index and drug reduction index were calculated with the Chou-Talalay method based on the median-effect principle. Flow cytometry and laser scanning confocal microscopy were employed to evaluate the effects of both drugs on cell-cycle perturbation and apoptosis, generation of reactive oxygen species (ROS), mitochondrial membrane potential, and expression of Bcl-2 and caspase-3 in MGC803 cells. Berberine or d-limonene alone can inhibit the growth of MGC803 cells in a dose- and time-dependent manner. Berberine and d-limonene at a combination ratio of 1:4 exhibited a synergistic effect on anti-MGC803 cells. The two drugs distinctly induced intracellular ROS generation, reduced the mitochondrial transmembrane potential (ΔΨm), enhanced the expression of caspase-3, and decreased the expression of Bcl-2. The combination of berberine and d-limonene showed more remarkable effects compared with drugs used singly in MGC803 cells. The combination of berberine and d-limonene exerted synergistic anticancer effects on MGC803 cells by cell-cycle arrest, ROS production, and apoptosis induction through the mitochondria-mediated intrinsic pathway.

Association of polymorphisms of the xeroderma pigmentosum complementation group F gene with increased glioma risk

We aimed to investigate the role of 4 single nucleotide polymorphisms of the xeroderma pigmentosum complementation group F (XPF) gene (rs3136038, rs1799798, rs1800067, and rs2276466) in glioma, and the roles of gene-gene interactions in the risk of developing this type of cancer. We collected samples from 225 glioma cases and 262 controls and genotyped the rs3136038, rs1799798, rs1800067, and rs2276466 polymorphisms using a 384-well plate format with the Sequenom MassARRAY platform. Individuals carrying the rs1800067 GG genotype were more likely to have an increased risk of glioma when compared with carriers of the A/A genotype in a co-dominant model, with an odds ratio (OR) [95% confidence interval (CI)] of 2.85 (1.14-7.76). However, we did not find an association with increased risk of glioma for the polymorphisms rs3136038, rs1799798, and rs2276466 in XPF. The combination genotype of the rs1800067 G allele and the rs2276466 G allele was associated with a moderate risk of glioma (OR = 1.71, 95%CI = 1.02-2.87). Our study suggests that the rs1800067 genetic variant of XPF functions in the development of glioma.

The study towards high intensity high charge state laser ion sources

As one of the candidate ion sources for a planned project, the High Intensity heavy-ion Accelerator Facility, a laser ion source has been being intensively studied at the Institute of Modern Physics in the past two years. The charge state distributions of ions produced by irradiating a pulsed 3 J/8 ns Nd:YAG laser on solid targets of a wide range of elements (C, Al, Ti, Ni, Ag, Ta, and Pb) were measured with an electrostatic ion analyzer spectrometer, which indicates that highly charged ions could be generated from low-to-medium mass elements with the present laser system, while the charge state distributions for high mass elements were relatively low. The shot-to-shot stability of ion pulses was monitored with a Faraday cup for carbon target. The fluctuations within ±2.5% for the peak current and total charge and ±6% for pulse duration were demonstrated with the present setup of the laser ion source, the suppression of which is still possible.

Study on a negative hydrogen ion source with hot cathode arc discharge

A negative hydrogen (H(-)) ion source with hot cathode arc discharge was designed and fabricated as a primary injector for a 10 MeV PET cyclotron at IMP. 1 mA dc H(-) beam with ɛ N, RMS = 0.08 π mm mrad was extracted at 25 kV. Halbach hexapole was adopted to confine the plasma. The state of arc discharge, the parameters including filament current, arc current, gas pressure, plasma electrode bias, and the ratio of I(e(-))/I(H(-)) were experimentally studied. The discussion on the result, and opinions to improve the source were given.

Application of evaporative cooling technology in super-high power density magnet

Evaporative cooling technology utilizes phase-change heat transfer mode to achieve the cooling for heating equipment. The heat transfer capacity of evaporative cooling technology is far more than air or water cooling technology. The Electron Cyclotron Resonance ion source magnet is a typical super-high power density magnet, and the evaporative cooling technology is an ideal cooling method for the coils of magnet. In this paper we show the structure and process of coils and the special design of flow channels of coolant for an experiment magnet model. Additionally, the heat transfer circulation is presented and analyzed. By the finite element method, the flow channels are optimized to rationally allocate coolant and to reduce the temperature of coils. For the experiment model, the current density of copper wire of coils is 19 A/mm(2), and the coil-windows current density is larger than 12 A/mm(2). The max temperature of coils is below 80 °C, and the total heat is about 200 kW.

Progress of a room temperature electron cyclotron resonance ion source using evaporative cooling technology at Institute of Modern Physics

A new room temperature ECR ion source, Lanzhou Electron Cyclotron Resonance ion source No. 4 (LECR4, previously named DRAGON), is under intense construction at Institute of Modern Physics. LECR4 is designed to operate with 18 GHz microwave frequency. The maximum axial magnetic fields are 2.3 T at injection and 1.3 T at extraction, and the radial field at the plasma chamber wall of 76 mm inner diameter is 1.0-1.2 T. One of the unique features for LECR4 is that its axial solenoids are winded with solid square copper wires which are immersed in a kind of special evaporative cooling medium for cooling purpose. Till now, a prototype of the cooling system has been successfully constructed and tested, which has demonstrated that the cooling efficiency of the designed system could meet the requirements of LECR4 under the routine operation conditions. All the main components of the ion source have been completed. Assembly and commissioning is ongoing. The latest developments and test results will be presented in this paper.

A 2.45 GHz intense proton source and low energy beam transport system for China Initiative Accelerator Driven Sub-Critical reactor system

At Institute of Modern Physics, a cw 35 keV, 20 mA intense proton source and the low energy beam transport system (LEBT) have been developed for China Initiative Accelerator Driven Sub-Critical reactor system. In order to ensure high quality transmission of the intense ion beam from the exit of ion source to Radio Frequency Quadrupole (RFQ), a low energy beam transport line is used to focus beam to the RFQ entrance and match the Twiss parameters to the RFQ requirements. The 35 keV, 20 mA ion beam extracted by a three-electrode extraction system from the ion source passes through the LEBT to the RFQ entrance and the root-mean-square emittance is measured to be less than 0.2 π mm mrad. The commissioning results of the ion source and low energy beam transport system are described in this paper. The beam quality and transmission efficiency are also studied.

Studies on low energy beam transport for high intensity high charged ions at IMP

Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou (SECRAL) is an advanced fully superconducting ECR ion source at IMP designed to be operational at the microwave frequency of 18-24 GHz. The existing SECRAL beam transmission line is composed of a solenoid lens and a 110° analyzing magnet. Simulations of particle tracking with 3D space charge effect and realistic 3D magnetic fields through the line were performed using particle-in-cell code. The results of the beam dynamics show that such a low energy beam is very sensitive to the space charge effect and significantly suffers from the second-order aberration of the analyzing magnet resulting in large emittance. However, the second-order aberration could be reduced by adding compensating sextupole components in the beam line. On this basis, a new 110° analyzing magnet with relatively larger acceptance and smaller aberration is designed and will be used in the design of low energy beam transport line for a new superconducting ECR ion source SECRAL-II. The features of the analyzer and the corresponding beam trajectory calculation will be detailed and discussed in this paper.

Progress of superconducting electron cyclotron resonance ion sources at Institute of Modern Physics (IMP)

Superconducting ECR ion sources can produce intense highly charged ion beams for the application in heavy ion accelerators. Superconducting Electron Resonance ion source with Advanced Design (SECRAL) is one of the few fully superconducting ECR ion sources that has been successfully built and put into routine operation for years. With enormous efforts and R&D work, promising results have been achieved with the ion source. Heated by the microwave power from a 7 kW/24 GHz gyrotron microwave generator, very intense highly charged gaseous ion beams have been produced, such as 455 eμA Xe(27+), 236 eμA Xe(30+), and 64 eμA Xe(35+). Since heavy metallic ion beams are being more and more attractive and important for many accelerator projects globally, intensive studies have been made to produce highly charged heavy metal ion beams, such as those from bismuth and uranium. Recently, 420 eμA Bi(30+) and 202 eμA U(33+) have been produced with SECRAL source. This paper will present the latest results with SECRAL, and the operation status will be discussed as well. An introduction of recently started SECRAL II project will also be given in the presentation.

Leaf functional trait variation associated with salt tolerance in perennial ryegrass

Salinity is one of major environmental stresses that dramatically threaten plant growth, and variations in genetic structure and functional traits have important effects on the salt tolerance of perennial ryegrass (Lolium perenne L.). The objectives of this study were to: (i) assess the inter-clonal variation of functional traits of accessions among geographic groups or between wild and commercial groups in response to salt stress; (ii) develop a mathematical model to effectively assess salt tolerance of perennial ryegrass accessions originating from different geographic populations; and (iii) determine the relation between spatial genetic structure and salt tolerance in perennial ryegrass. Wide variations were found among the accessions for seven functional traits. One regression model (F = 0.49 × F1 + 0.303 × F2 + 0.207 × F3) was established to ascertain salt tolerance of each accession. The highest variation of the traits and salt tolerance were obtained for accessions from the European group. Wild accessions exhibited more variation in functional traits and salt tolerance than commercial cultivars. Both molecular marker techniques and functional traits were used to conduct phylogenetic analysis, and the majority of accessions from the same or adjacent regions were clustered into the same group or subgroup. The perennial ryegrass accessions with similar salt tolerance had a close phylogenetic background. The patterns in functional trait variations associated with salt tolerance might allow acceleration of the process for improving salt stress resistance in perennial ryegrass.

Efficacy and safety of glimepiride as initial treatment in Chinese patients with Type 2 diabetes mellitus

OBJECTIVE

To investigate the efficacy and safety of glimepiride as initial mono-therapy in type 2 diabetes patients in China.

METHODS

This is a multi-center, open-label, single arm study. A total of 391 subjects were enrolled to receive glimepiride treatment for 16 weeks, the initiation dose was 1 mg/d, with titration to 2 mg/d and 4 mg/d according to the fasting blood glucose (FBG) level measured at each visit. The change in HbA1c, fasting plasma glucose (FPG), 2 h postprandial blood glucose (2hPPG), HOMA-IR, weight, waist circumference and the incidence of hypoglycemia were evaluated. An exploratory analysis was conducted to identify the potential population prone to achieve target glycemic control.

RESULTS

HbA1c was reduced significantly from 8.6 ± 1.6% to 6.9 ± 0.9% (p < 0.001); 60.9% of the subjects achieved HbA1c <7% at study endpoint. The reduction in FPG and 2hPPG were 2.3 mmol/L and 4.4 mmol/L (p < 0.001) respectively. Insulin resistance was improved significantly with HOMA-IR decreasing from 2.5 ± 2.3 to 2.2 ± 1.9 (p = 0.009). The incidence of confirmed hypoglycemia (BG ≤ 3.9 mmol/L) was 3.1%.

CONCLUSIONS

Glimepiride treatment as initial mono-therapy could effectively improve blood glucose control in type 2 diabetic patients, with a favorable safety profile. Lack of control group was the major limitation of this study. ClinicalTrial.gov identifier: NCT00908921.

A low energy beam transport system for proton beam

A low energy beam transport (LEBT) system has been built for a compact pulsed hadron source (CPHS) at Tsinghua University in China. The LEBT, consisting of two solenoids and three short-drift sections, transports a pulsed proton beam of 60 mA of energy of 50 keV to the entrance of a radio frequency quadrupole (RFQ). Measurement has shown a normalized RMS beam emittance less than 0.2 π mm mrad at the end of the LEBT. Beam simulations were carried out to compare with the measurement and are in good agreement. Based on the successful CPHS LEBT development, a new LEBT for a China ADS projector has been designed. The features of the new design, including a beam chopper and beam simulations of the LEBT are presented and discussed along with CPHS LEBT development in this article.

Guided migration of neural stem cells derived from human embryonic stem cells by an electric field

Small direct current (DC) electric fields (EFs) guide neurite growth and migration of rodent neural stem cells (NSCs). However, this could be species dependent. Therefore, it is critical to investigate how human NSCs (hNSCs) respond to EF before any possible clinical attempt. Aiming to characterize the EF-stimulated and guided migration of hNSCs, we derived hNSCs from a well-established human embryonic stem cell line H9. Small applied DC EFs, as low as 16 mV/mm, induced significant directional migration toward the cathode. Reversal of the field polarity reversed migration of hNSCs. The galvanotactic/electrotactic response was both time and voltage dependent. The migration directedness and distance to the cathode increased with the increase of field strength. (Rho-kinase) inhibitor Y27632 is used to enhance viability of stem cells and has previously been reported to inhibit EF-guided directional migration in induced pluripotent stem cells and neurons. However, its presence did not significantly affect the directionality of hNSC migration in an EF. Cytokine receptor [C-X-C chemokine receptor type 4 (CXCR4)] is important for chemotaxis of NSCs in the brain. The blockage of CXCR4 did not affect the electrotaxis of hNSCs. We conclude that hNSCs respond to a small EF by directional migration. Applied EFs could potentially be further exploited to guide hNSCs to injured sites in the central nervous system to improve the outcome of various diseases.

Performance and operation of advanced superconducting electron cyclotron resonance ion source SECRAL at 24 GHz

SECRAL (superconducting ECR ion source with advanced design in Lanzhou) ion source has been in routine operation for Heavy Ion Research Facility in Lanzhou (HIRFL) accelerator complex since May 2007. To further enhance the SECRAL performance in order to satisfy the increasing demand for intensive highly charged ion beams, 3-5 kW high power 24 GHz single frequency and 24 GHz +18 GHz double frequency with an aluminum plasma chamber were tested, and some exciting results were produced with quite a few new record highly charged ion beam intensities, such as (129)Xe(35+) of 64 eμA, (129)Xe(42+) of 3 eμA, (209)Bi(41+) of 50 eμA, (209)Bi(50+) of 4.3 eμA and (209)Bi(54+) of 0.2 eμA. In most cases SECRAL is operated at 18 GHz to deliver highly charged heavy ion beams for the HIRFL accelerator, only for those very high charge states and very heavy ion beams such as (209)Bi(36+) and (209)Bi(41+), SECRAL has been operated at 24 GHz. The total operation beam time provided by SECRAL up to July 2011 has exceeded 7720 hours. In this paper, the latest performance, development, and operation status of SECRAL ion source are presented. The latest results and reliable long-term operation for the HIRFL accelerator have demonstrated that SECRAL performance for production of highly charged heavy ion beams remains improving at higher RF power with optimized tuning.

Development of DRAGON electron cyclotron resonance ion source at Institute of Modern Physics

A new room temperature electron cyclotron resonance (ECR) ion source, DRAGON, is under construction at IMP. DRAGON is designed to operate at microwaves of frequencies of 14.5-18 GHz. Its axial solenoid coils are cooled with evaporative medium to provide an axial magnetic mirror field of 2.5 T at the injection and 1.4 T at the extraction, respectively. In comparison to other conventional room temperature ECR ion sources, DRAGON has so far the largest bore plasma chamber of inner diameter of 126 mm with maximum radial fields of 1.4-1.5 T produced by a non-Halbach permanent sextupole magnet.

Status of the laser ion source at IMP

A laser (Nd:YAG laser, 3 J, 1064 nm, 8-10 ns) ion source has been built and under development at IMP to provide pulsed high-charge-state heavy ion beams to a radio frequency quadrupole (RFQ) for upgrading the IMP accelerators with a new low-energy beam injector. The laser ion source currently operates in a direct plasma injection scheme to inject the high charge state ions produced from a solid target into the RFQ. The maximum power density on the target was about 8.4 × 10(12) W∕cm(2). The preliminary experimental results will be presented and discussed in this paper.

A 2.45 GHz electron cyclotron resonance proton ion source and a dual-lens low energy beam transport

The structure and preliminary commissioning results of a new 2.45 GHz ECR proton ion source and a dual-lens low energy beam transport (LEBT) system are presented in this paper. The main magnetic field of the ion source is provided by a set of permanent magnets with two small electro-solenoid magnets at the injection and the extraction to fine tune the magnetic field for better microwave coupling. A 50 keV pulsed proton beam extracted by a three-electrode mechanism passes through the LEBT system of length of 1183 mm. This LEBT consists of a diagnosis chamber, two Glaser lenses, two steering magnets, and a final beam defining cone. A set of inner permanent magnetic rings is embedded in each of the two Glaser lenses to produce a flatter axial-field to reduce the lens aberrations.

Study of ion beam transport from the SECRAL electron cyclotron resonance ion source at the Institute of Modern Physics

Ion beam transport from the Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou (SECRAL) electron cyclotron resonance ion source was studied at the Institute of Modern Physics during 2010. Particle-in-cell simulations and experimental results have shown that both space charge and magnetic aberrations lead to a larger beam envelope and emittance growth. In the existing SECRAL extraction beam line, it has been shown that raising the solenoid lens magnetic field reduces aberrations in the subsequent dipole and results in lower emittance. Detailed beam emittance measurements are presented in this paper.

Expression pattern of heat-shock cognate 70 gene of humphead snapper, Lutjanus sanguineus (Cuvier), infected by Vibrio harveyi

The heat-shock cognate 70 (HSC70) gene of humphead snapper, Lutjanus sanguineus, designated as ByHSC70, was cloned by rapid amplification of cDNA ends (RACE) with the primers designed from the known expressed sequence tag (EST) identified from the subtracted cDNA library of the head kidney of humphead snapper. The full-length cDNA of ByHSC70 is 2313 bp, containing a 5' terminal untranslated region (UTR) of 96 bp, a 3' terminal UTR of 267 bp, and an open reading frame (ORF) of 1950 bp encoding a polypeptide of 650 amino acids with a theoretical molecular weight of 71.21 kDa and an estimated isoelectric point (pI) of 5.08. ByHSC70 contained three classical HSP70 family signatures. BLAST analysis showed that the amino acid sequence of ByHSC70 had the highest similarity of 99% when compared with other HSC70s. Fluorescent real-time quantitative RT-PCR was used to examine the expression of ByHSC70 gene in eight kinds of tissues/organs of humphead snapper after challenge with Vibrio harveyi. There was a clear time-dependent expression pattern of ByHSC70 in head kidney, spleen and thymus after bacterial challenge, and the expression of mRNA reached a maximum level at 9, 6 and 24 h post-infection and then returned to control levels after 15, 24 and 36 h, respectively. Our results suggest that HSC70 is an important component in the immune system of humphead snapper, its their rapid transcriptional upregulation in response to V. harveyi infection might be important for survival of humphead snapper.

Expression pattern of heat shock protein 90 gene of humphead snapper Lutjanus sanguineus during pathogenic Vibrio harveyi stress

The full-length cDNA of heat shock protein 90 (HSP90) of humphead snapper Lutjanus sanguineus, designated as rsHSP90, was cloned by rapid amplification of complementary (c)DNA ends (RACE) techniques with the primers designed from the known expressed sequence tag (EST) sequence identified from the subtracted cDNA library of the head kidney of L. sanguineus. Sequence analysis showed that the full-length cDNA of rsHSP90 was 2745 bp, containing a 5' terminal untranslated region (UTR) of 99 bp, a 3' terminal UTR of 471 bp and an open reading frame (ORF) of 2175 bp encoding a polypeptide of 725 amino acids. On the basis of the deduced amino acid sequence, the theoretical molecular mass of rsHSP90 was calculated to be 83·18 kDa with an isoelectric point of 4·79. Moreover, five classical HSP90 family signatures were found in the amino acids sequence of rsHSP90 by PredictProtein. Basic local-alignment search-tool (BLAST) analysis revealed that the amino acids sequence of rsHSP90 had the highest similarity of 97% when compared with other HSP90s. Fluorescent real-time quantitative reverse-transcription (RT)-PCR was used to examine the expression pattern of rsHSP90 in eight kinds of tissues and organs of L. sanguineus challenged with Vibrio harveyi. There was a clear time-dependent expression pattern of rsHSP90 in head kidney, spleen and thymus after bacterial challenge and the expression of messenger (m)RNA reached the maximum level at the time points of 9, 15 and 24 h, respectively. The up-regulated mRNA expression of rsHSP90 in L. sanguineus after bacterial challenge indicated that rsHSP90 was inducible and might be involved in immune response.

Heparin-functionalized collagen matrices with controlled release of basic fibroblast growth factor

Tissue engineering scaffolds with controlled long-term release of growth factors are constructed in an attempt to mimic the intelligent ability of the extracellular matrix (ECM) to release endogenous growth factors. In this study, collagen sponges (Collagen group) were modified by N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) crosslinking (EDC/NHS group) and heparin immobilization (EDC/NHS-H group), and subsequently seeded with human umbilical vein endothelial cells (HUVECs). Native and modified sponges were pre-adsorbed with basic fibroblast growth factor (bFGF) to evaluate the sustained release and bioactive maintenance of bFGF from the sponges. We found that modified collagen matrices permitted HUVECs to proliferate and migrate well and to distribute uniformly. The EDC/NHS-H group exhibited an excellent sustained-release profile and bioactive maintenance of the pre-adsorbed bFGF as compared with the Collagen and EDC/NHS groups. These results suggest that heparin-functionalized collagen matrices can support a controlled release of bFGF and thus, have potential as a tissue engineering scaffold.

Ratio-contrast imaging of dual-energy absorption for element mapping with a scanning transmission X-ray microscope

The detection of chemical mapping with a spatial resolution of 30 nm has been achieved with a scanning transmission X-ray microscope at the Shanghai Synchrotron Radiation Facility. For each specimen, two absorption images were scanned separately with energies E(1) and E(2): E(1) was focused on the absorption edge of the chosen element and E(2) was focused below the edge. A K-edge division method is proposed and applied to obtain the element mapping. Compared with the frequently used K-edge subtraction method, this ratio-contrast method is shown to be more accurate and sensitive in identifying the elements of interest, where the definition of the contrast threshold is simple and clear in physics. Several examples are presented to illustrate the effectiveness of the method.

Effect of the tensor force on the charge exchange spin-dipole excitations of 208Pb

The charge exchange spin-dipole (SD) excitations of 208Pb are studied by using a fully self-consistent Skyrme Hartree-Fock plus random phase approximation formalism which includes the tensor interaction. It is found, for the first time, that the tensor correlations have a unique, multipole-dependent effect on the SD excitations; that is, they produce a softening of 1{-} states, but a hardening of 0{-} and 2{-} states. This paves the way to a clear assessment of the strength of the tensor terms. We compare our results with a recent measurement, showing that our choice of tensor terms improves the agreement with experiment. The robustness of our results is supported by the analytic form of the tensor matrix elements.

New development of advanced superconducting electron cyclotron resonance ion source SECRAL (invited)

Superconducting electron cyclotron resonance ion source with advance design in Lanzhou (SECRAL) is an 18-28 GHz fully superconducting electron cyclotron resonance (ECR) ion source dedicated for highly charged heavy ion beam production. SECRAL, with an innovative superconducting magnet structure of solenoid-inside-sextupole and at lower frequency and lower rf power operation, may open a new way for developing compact and reliable high performance superconducting ECR ion source. One of the recent highlights achieved at SECRAL is that some new record beam currents for very high charge states were produced by 18 GHz or 18+14.5 GHz double frequency heating, such as 1 e microA of (129)Xe(43+), 22 e microA of (209)Bi(41+), and 1.5 e microA of (209)Bi(50+). To further enhance the performance of SECRAL, a 24 GHz/7 kW gyrotron microwave generator was installed and SECRAL was tested at 24 GHz. Some promising and exciting results at 24 GHz with new record highly charged ion beam intensities were produced, such as 455 e microA of (129)Xe(27+) and 152 e microA of (129)Xe(30+), although the commissioning time was limited within 3-4 weeks and rf power only 3-4 kW. Bremsstrahlung measurements at 24 GHz show that x-ray is much stronger with higher rf frequency, higher rf power. and higher minimum mirror magnetic field (minimum B). Preliminary emittance measurements indicate that SECRAL emittance at 24 GHz is slightly higher that at 18 GHz. SECRAL has been put into routine operation at 18 GHz for heavy ion research facility in Lanzhou (HIRFL) accelerator complex since May 2007. The total operation beam time from SECRAL for HIRFL accelerator has been more than 2000 h, and (129)Xe(27+), (78)Kr(19+), (209)Bi(31+), and (58)Ni(19+) beams were delivered. All of these new developments, the latest results, and long-term operation for the accelerator have again demonstrated that SECRAL is one of the best in the performance of ECR ion source for highly charged heavy ion beam production. Finally the future development of SECRAL will be presented.

Production of highly charged ion beams with SECRAL

Superconducting electron cyclotron resonance ion source with advanced design in Lanzhou (SECRAL) is an all-superconducting-magnet electron cyclotron resonance ion source (ECRIS) for the production of intense highly charged ion beams to meet the requirements of the Heavy Ion Research Facility in Lanzhou (HIRFL). To further enhance the performance of SECRAL, an aluminum chamber has been installed inside a 1.5 mm thick Ta liner used for the reduction of x-ray irradiation at the high voltage insulator. With double-frequency (18+14.5 GHz) heating and at maximum total microwave power of 2.0 kW, SECRAL has successfully produced quite a few very highly charged Xe ion beams, such as 10 e microA of Xe(37+), 1 e microA of Xe(43+), and 0.16 e microA of Ne-like Xe(44+). To further explore the capability of the SECRAL in the production of highly charged heavy metal ion beams, a first test run on bismuth has been carried out recently. The main goal is to produce an intense Bi(31+) beam for HIRFL accelerator and to have a feel how well the SECRAL can do in the production of very highly charged Bi beams. During the test, though at microwave power less than 3 kW, more than 150 e microA of Bi(31+), 22 e microA of Bi(41+), and 1.5 e microA of Bi(50+) have been produced. All of these results have again demonstrated the great capability of the SECRAL source. This article will present the detailed results and brief discussions to the production of highly charged ion beams with SECRAL.

Effects of annealing on the ferromagnetism and photoluminescence of Cu-doped ZnO nanowires

Room temperature ferromagnetic Cu-doped ZnO nanowires have been synthesized using the chemical vapor deposition method. By combining structural characterizations and comparative annealing experiments, it has been found that both extrinsic (CuO nanoparticles) and intrinsic (Zn(1-x)Cu(x)O nanowires) sources are responsible for the observed ferromagnetic ordering of the as-grown samples. As regards the former, annealing in Zn vapor led to a dramatic decrease of the ferromagnetism. For the latter, a reversible switching of the ferromagnetism was observed with sequential annealings in Zn vapor and oxygen ambience respectively, which agreed well with previous reports for Cu-doped ZnO films. In addition, we have for the first time observed low temperature photoluminescence changed with magnetic properties upon annealing in different conditions, which revealed the crucial role played by interstitial zinc in directly mediating high T(c) ferromagnetism and indirectly modulating the Cu-related structured green emission via different charge transfer transitions.

A randomized, multicenter controlled trial to compare the efficacy of recombinant human parathyroid hormone (1-34) with elcatonin in postmenopausal women with osteoporosis in China

BACKGROUND

Recombinant human parathyroid hormone (1-34) (rhPTH (1-34)) given by injection is a new seventh class drug of biological products, which is prepared by adopting gene recombination technique. rhPTH (1-34) is mainly used to treat osteoporosis, especially for postmenopausal women. This study compared the clinical efficacy and safety of rhPTH (1-34) with elcatonin for treating postmenopausal women with osteoporosis in 11 urban areas of China.

METHODS

Two hundred and five women with osteoporosis were enrolled in a 6-month, multicenter, randomized, controlled study. They were randomized to receive either rhPTH (1-34) 20 microg (200 U) daily or elcatonin 20 U weekly. Lumbar spine (L1-4) and femoral neck bone mineral density (BMD), as well as biochemical markers of bone turnover were measured. Adverse events were recorded.

RESULTS

rhPTH (1-34) increased lumbar BMD significantly more than did elcatonin at 3 months and 6 months (2.38% vs 0.59%, P < 0.05; 5.51% vs 1.55%, P < 0.01), but there were no significant increases of BMD in these two groups at femoral neck. There were larger mean increases in bone markers in the rhPTH (1-34) group than in the elcatonin group at 3 months and 6 months (serum bone-specific alkaline phosphatase (BSAP) 36.79% vs 0.31%; 92.42% vs -0.17%; urinary N-telopeptide/creatinine (NTX/Cr) 48.91% vs -5.32%; 68.82% vs -10.86%). Both treatments were well tolerated and there were no significant differences detected between the two groups in the proportion of any adverse events and any serious adverse events (67.0% vs 59.0%; 0 vs 0).

CONCLUSIONS

rhPTH (1-34) has more positive effects on bone formation, as shown by the larger increments of lumbar BMD and bone formation markers, than elcatonin, with only mild adverse events and no significant change in the liver, kidney or hematological indices.

Fabrication of oriented ZnO nanorod arrays and their optical performances

The well-aligned ZnO nanorod arrays were fabricated through a simple chemical process under low temperature. The nanorod arrays were characterized by XRD, SEM, TEM, HRTEM and SAED, and their optical performances were investigated with Raman and PL spectroscopy. The results show that the as-prepared ZnO nanorod arrays are dense, the individual ZnO nanorod is hexagonal shape and grows along c-axis perpendicular to the substrate surface with good single crystal in nature. The Raman property of nanorod arrays displays change with the altering the preparation conditions. Moreover, the PL performances of ZnO nanorod arrays exhibit tunable character with adjusting the synthesis conditions.

Intense beam production of highly charged heavy ions by the superconducting electron cyclotron resonance ion source SECRAL

There has been increasing demand to provide higher beam intensity and high enough beam energy for heavy ion accelerator and some other applications, which has driven electron cyclotron resonance (ECR) ion source to produce higher charge state ions with higher beam intensity. One of development trends for highly charged ECR ion source is to build new generation ECR sources by utilization of superconducting magnet technology. SECRAL (superconducting ECR ion source with advanced design in Lanzhou) was successfully built to produce intense beams of highly charged ion for Heavy Ion Research Facility in Lanzhou (HIRFL). The ion source has been optimized to be operated at 28 GHz for its maximum performance. The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping. An innovative design of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. For 28 GHz operation, the magnet assembly can produce peak mirror fields on axis of 3.6 T at injection, 2.2 T at extraction, and a radial sextupole field of 2.0 T at plasma chamber wall. During the commissioning phase at 18 GHz with a stainless steel chamber, tests with various gases and some metals have been conducted with microwave power less than 3.5 kW by two 18 GHz rf generators. It demonstrates the performance is very promising. Some record ion beam intensities have been produced, for instance, 810 e microA of O(7+), 505 e microA of Xe(20+), 306 e microA of Xe(27+), and so on. The effect of the magnetic field configuration on the ion source performance has been studied experimentally. SECRAL has been put into operation to provide highly charged ion beams for HIRFL facility since May 2007.

Extreme ultraviolet narrow band emission from electron cyclotron resonance plasmas

Extreme ultraviolet lithography (EUVL) is considered as the most promising solution at and below dynamic random access memory 32 nm half pitch among the next generation lithography, and EUV light sources with high output power and sufficient lifetime are crucial for the realization of EUVL. However, there is no EUV light source completely meeting the requirements for the commercial application in lithography yet. Therefore, ECR plasma is proposed as a novel concept EUV light source. In order to investigate the feasibility of ECR plasma as a EUV light source, the narrow band EUV power around 13.5 nm emitted by two highly charged ECR ion sources -- LECR2M and SECRAL -- was measured with a calibrated EUV power measurement tool. Since the emission lines around 13.5 nm can be attributed to the 4d-5p transitions of Xe XI or the 4d-4f unresolved transition array of Sn VIII-XIII, xenon plasma was investigated. The dependence of the EUV throughput and the corresponding conversion efficiency on the parameters of the ion source, such as the rf power and the magnetic confinement configurations, were preliminarily studied.

Experimental study of hot electrons in LECR2M plasma

In order to investigate the hot electron component in electron cyclotron resonance (ECR) plasmas, the volume bremsstrahlung spectra in the x-ray photon energy range were measured with a high-purity germanium detector on Lanzhou ECR Ion Source No. 2 Modified (LECR2M). A collimation system similar to Bernhardi's was used to focus at the central part of the plasma. The ion source was operated under various source conditions with argon; sometimes oxygen was added to enhance high charge state ion beam intensities. The spectral temperature of hot electrons T(spe) was derived from the measured bremsstrahlung spectra. The evolution of the deduced temperature of hot electrons T(spe) with the ion source parameters, such as the rf frequency, power, and the magnetic confinement configuration, was investigated.

An electron cyclotron resonance ion source based low energy ion beam platform

To satisfy the requirements of surface and atomic physics study in the field of low energy multiple charge state ion incident experiments, a low energy (10 eV/q-20 keV/q) ion beam platform is under design at IMP. A simple test bench has been set up to test the ion beam deceleration systems. Considering virtues such as structure simplicity, easy handling, compactness, cost saving, etc., an all-permanent magnet ECRIS LAPECR1 [Lanzhou all-permanent magnet electron cyclotron resonance (ECR) ion source No. 1] working at 14.5 GHz has been adopted to produce intense medium and low charge state ion beams. LAPECR1 source has already been ignited. Some intense low charge state ion beams have been produced on it, but the first test also reveals that many problems are existing on the ion beam transmission line. The ion beam transmission mismatches result in the depressed performance of LAPECR1, which will be discussed in this paper. To obtain ultralow energy ion beam, after being analyzed by a double-focusing analyzer magnet, the selected ion beam will be further decelerated by two afocal deceleration lens systems, which is still under design. This design has taken into consideration both ions slowing down and also ion beam focusing. In this paper, the conceptual design of deceleration system will be discussed.

Polarity determination for the CdxZn1-xS nanocombs by EELS

Comb-like Cd(x)Zn(1-x)S nanostructures have been synthesized by one-step metallo-organic chemical vapor deposition (MOCVD). The microstructure and composition were characterized by analytical transmission electron microscopy (TEM). The ribbon of the comb-like structure is along [2-1-10] (the a-axis), and the nanotips are along [0001] (the c-axis). The atomic location by channeling-enhanced microanalysis (ALCHEMI) technique was used to determine the polarity of the crystal via electron energy-loss spectroscopy (EELS). The thickness dependence, delocalization and beam convergent effect are discussed here. The investigations reveal that the growth mechanism is consistent with the asymmetric growth.

PMN degranulation in relation to CD63 expression and genetic polymorphisms in healthy individuals and COPD patients

Polymorphonuclear neutrophils (PMNs) play an important role in chronic obstructive pulmonary disease (COPD) pathogenesis. The tetraspanin CD63 is a membrane marker of azurophilic granules and is actively involved in the process of PMN endocytosis and azurophilic granule exocytosis. In this study, we investigated genetic polymorphisms of the CD63 gene, quantified CD63 expression and PMN myeloperoxidase (MPO) release in healthy individuals and COPD patients. We evaluated the potential correlations between genetic polymorphisms and gene expression and MPO release. COPD patients had significantly lower CD63 expression and released less MPO upon chemokine stimulation compared with the healthy individuals. Eleven putative polymorphisms in the CD63 gene were investigated but only three were polymorphic in our study subjects. None of the polymorphisms was associated with CD63 expression in either the healthy subjects or the COPD patients. However, the 8041C/G polymorphism, which is located 3' to the CD63 gene, was associated with MPO release in the healthy subjects. The CC genotype was associated with greater MPO release than the GG genotype (P=0.007). These results suggest that COPD patients have different patterns of CD63 expression and PMN mediator release than healthy individuals. It is likely that genetic variants have limited effect on CD63 expression and MPO release in the context of COPD but their role in other diseases has yet to be determined.

Syntheses and Structures of Two Arene-Ruthenium(II) Complexes with Cyclometalating 2-Pyridyl-m-tolyl Ligands

Reactions of [(η6-C6Me6)RuCl2]2 and [(η6-p-cymene)RuCl2]2 with [Hg(ptpy)2] (Hptpy = 2-pyridyl-m-toluene) in THF afforded [{(η6-C6Me6)Ru(ptpy)}2(μ-Hg2Cl6)] 1 and [(η6-pcymene) Ru(ptpy)(HgCl3)] 2, respectively. The crystal structures of complexes 1 and 2 have been determined by single-crystal X-ray diffraction. The ruthenium atom in both molecules 1 and 2 adopts a pseudo octahedral configuration containing a cyclometalated ptpy ligand. The Ru−C(ptpy) and Ru−N bond lengths in 1 are 2.049(3) and 2.089(2) Å, respectively. The corresponding bond lengths for 2 are 2.025(9) and 2.089(7) Å .

36-segmented high magnetic field hexapole magnets for electron cyclotron resonance ion source

Two high magnetic field hexapoles for electron cyclotron resonance ion source (ECRIS) have successfully fabricated to provide sufficient radial magnetic confinement to the ECR plasma. The highest magnetic field at the inner pole tip of one of the magnets exceeds 1.5 T, with the inner diameter (i.d.)=74 mm. The other hexapole magnet provides more than 1.35 T magnetic field at the inner pole tip, and the i.d. is 84 mm. In this article, we discuss the necessity to have a good radial magnetic field confinement and the importance of a Halbach hexapole to a high performance ECRIS. The way to design a high magnetic field Halbach structure hexapole and one possible solution to the self-demagnetization problem are both discussed. Based on the above discussions, two high magnetic field hexapoles have been fabricated to be utilized on two high performance ECRISs in Lanzhou. The preliminary results obtained from the two ECR ion sources are given.

Manipulation of dendritic cells for host defence against intracellular infections

Dendritic cells (DCs) are an important innate immune cell type which is the bridge between innate and adaptive immunity. Mounting experimental evidence suggests that manipulating DCs represents a powerful means to enhance host defence against intracellular infectious diseases. We have developed several strategies to manipulate DCs either in vivo or in vitro for the purpose of enhancing the effect of vaccination or immunotherapeutics. In vivo delivery of transgene encoding GM-CSF (granulocyte/macrophage colony-stimulating factor), a DC-activating cytokine, increases the number and activation status of DCs at various tissue sites and enhances antimicrobial immune responses in murine models. Co-expression or co-delivery of GM-CSF gene transfer vector with an antimicrobial vaccine enhances microbial antigen-specific T-cell responses and immune protection. Murine bone marrow-derived DCs are being manipulated in vitro and exploited as a vaccine delivery system. Transduction of DCs with a virus-vectored tuberculosis vaccine is a powerful way to activate T-cells in vivo. Such genetically modified DC vaccines can be administered either parenterally or mucosally via the respiratory tract.

[Status of vitamin A, vitamin B2, iron and an-oxidantive activity in anemic pregnant women in China]

OBJECTIVE

To investigate the status of vitamin A(VA), vitamin B2 (VB2), iron and anoxidative function in anemic and non-anemic pregnant women.

METHODS

426 anemic and 36 non-anemic pregnant women were included in the study. The survey of 24-hour's diet recall of pregnant women was made to evaluate intake of iron, VB2, folic acid, etc by the nutrition software provided by Beijing 301 hospital, iron and VA were measured by Radioimmunoassay (RIA) and by high-pressure liquid chromatography. VB2 status was detected using the assay for erythrocyte glutathione reductase (Egr; EC 1.6.4.2) activity. SOD and GSH-Px activities and MDA were determined using commercial kits. Peripheral blood erythrocyte membrane fluidity was detected by using 1,6-diphenyl-1,3,5-hexatriene as a probe, the degree of fluorescence polarization (P) at 25 degrees C of disrupted cells plasma membranes were compared for a variety of systems.

RESULTS

Median intakes of protein and vitamin C met the current Chinese RNIs for pregnancy, whereas intakes of(VA) and VB2 were well below the recommendations. Intake of iron were above 90%, but the main sources of iron are vegetables. Plasma VA (1.25 micromol/L) and iron (20.57 microg/L) were lower, BGRAC (1.79) was higher than that in non-anemia group (VA 1.57 micromol/L, SF 33.16 microg/L, BGRAC 1.52). The level of plasma SOD (77.1U/ml) and the activity of GSH-Px (61.9U) were lower than those in non-anemia group (92.2U/ml, 71.6U, P < 0.05), while MDA (4.58 nmol/ml) level and erythrocyte membrane (P = 0.2622, eta = 2.7465) fluidity were higher than those non-anemia group(MDA = 3.78 nmol/ ml, P = 0.2360, eta = 2.3658).

CONCLUSION

Plasam VA, VB2 and iron, antioxidantcapacity and erythrocyte membrane fluidity were decreased in the anemic pregnant women.

Clinical research on monitoring CSFP through lumbar epidural pressure

OBJECTIVE

Explore the relationship between lumbar Epidural Pressure (LEDP) and CSFP through clinical studies and to determine whether LEDP can represent CSFP.

METHODS

We selected 150 cases of cerebral diseases at random for this study. A special mini transducer was implanted into the lumbar epidural space between the third and the 4th lumbar vertebra by means of a No. 18 Touhy needle for monitoring of LEDP. In the meantime, a traditional lumbar puncture was made between the 4th and the 5th lumbar vertebrae and CSFP, which was taken as the standard value, was measured using an ordinary catheter. The transducer was adjusted until the LEDP was equal to CSFP and was designated LEDP0. The LEDP0 was monitored continuously and was translated into a continuous curve. In each and every case, a lumbar puncture was repeated at 24, 48, 72 and 96 hours to obtain CSFP for comparison and to explore the relationship between LEDP0 and CSFP. While monitoring LEDP0, we observed the variation in pressure when the patient breathed, coughed, changed posture, and also if the clinical symptoms changed with intracranial hypertension.

RESULT

The values of the intracranial pressure measured by these two methods were identical.

CONCLUSION

LEDP responded to the changes of CSFP.