Polymeric ionic liquid sorbent coatings in thin film microextraction: Insight into sorbent selectivity for pesticides and cannabinoids

Polymeric ionic liquid (PIL) sorbent coatings consisting of polymerizable cations and anions were employed as sorbent coatings in thin film microextraction (TFME) for the extraction of pesticides and cannabinoids. The blades consisted of a thin film of PIL sorbents chemically bonded to vinyltrimethoxysilane-functionalized nitinol sheets. The imidazolium- or ammonium-based PIL sorbents contained aromatic benzyl moieties as well as polar hydroxyl groups or aliphatic functional groups within the chemical structure of the IL monomer. The chemical structure of the IL crosslinkers of the PILs were kept constant across each sorbent, except for the anion, which consisted of either bis[(trifluoromethyl)sulfonyl]imide ([NTf2-]), p-styrenesulfonate ([SS-]), or 3-sulfopropyl acrylate ([SPA-]). Temperature, salt content, and methanol content were optimized as extraction conditions to maximize pesticide-cannabinoid selectivity using Doehlert design of experiments (DOE). Effects of these three factors on selectivity and extraction efficiency are discussed. The optimal extraction conditions consisting of sample temperature (31°C), sodium chloride (30% w/v), and methanol content (0.25% v/v) are compared to initial sorbent screening conditions at a sample temperature of 40°C, 15% (w/v) sodium chloride, and 2.5% (v/v) methanol content. PIL sorbent swelling behavior at different salt and methanol content conditions and its effect on extraction efficiency are hypothesized. Selectivity factors for the sorbents indicated that aromatic moieties within the IL monomer may enhance pesticide-cannabinoid selectivity under optimized conditions, but the extraction efficiency of pesticides that are known to coelute with cannabinoids in the chromatographic separation may be enhanced by employing sorbent coatings with [SPA-] anions.

Enhanced potency of a chloro-substituted polyaromatic platinum(II) complex and its platinum(IV) prodrug against lung cancer

The present study investigates the anti-neoplastic activity of a platinum (II) complex, Pt(II)5ClSS, and its platinum (IV) di-hydroxido analogue, Pt(IV)5ClSS, against mesenchymal cells (MCs), lung (A549), melanoma (A375) and breast (MDA-MB-231) cancer cells. Both complexes exhibited up to 14-fold improved cytotoxicity compared to cisplatin. NMR was used to determine that ∼25 % of Pt(IV)5ClSS was reduced to Pt(II)5ClSS in the presence of GSH (Glutathione) after 72 h. The complex 1H NMR spectra acquired for Pt(II)5ClSS with GSH shows evidence of degradation and environmental effects (∼30 %). The prominence of the 195Pt peak at ∼ -2800 ppm suggests that a significant amount of Pt(II)5ClSS remained in the mixture. Pt(II)5ClSS and Pt(IV)5ClSS have shown exceptional selectivity to cancer cells in comparison to MCs (IC50 > 150 μM). Western blot analysis of Pt(II)5ClSS and Pt(IV)5ClSS on A549 cells revealed significant upregulation of cleaved PARP-1, BAX/Bcl2 ratio, cleaved caspase 3 and cytochrome thus suggesting apoptosis was induced through the intrinsic pathway. Flow cytometry also revealed significant cell death by apoptosis. Treatment with Pt(II)5ClSS and Pt(IV)5ClSS also showed significant amounts of free radical production while the COMET assay showed that both complexes cause minimal DNA damage. Cellular uptake results via ICP-MS suggest a time-dependent active mode of transport for both complexes with Pt(II)5ClSS being transported at a higher rate compared to Pt(IV)5ClSS. A Dose Escalation Study carried out on BALB/c mice showed that Pt(II)5ClSS and Pt(IV)5ClSS were approximately 8- folds and 12.5-folds, respectively, more tolerated than cisplatin. The present study provides evidence that both complexes may have the characteristics of an efficient and potentially safe anti-tumor drug that could support NSCLC treatment.

ω-(5-Phenyl-2H-tetrazol-2-yl)alkyl-substituted glycine amides and related compounds as inhibitors of the amine oxidase vascular adhesion protein-1 (VAP-1)

Vascular adhesion protein-1 (VAP-1), also known as plasma amine oxidase or semicarbazide-sensitive amine oxidase, is an enzyme that degrades primary amines to aldehydes with the formation of hydrogen peroxide and ammonia. Among others, it plays a role in inflammatory processes as it can mediate the migration of leukocytes from the blood to the inflamed tissue. We prepared a series of ω-(5-phenyl-2H-tetrazol-2-yl)alkyl-substituted glycine amides and related compounds and tested them for inhibition of purified bovine plasma VAP-1. Compounds with submicromolar activity were obtained. Studies on the mechanism of action revealed that the glycine amides are substrate inhibitors, i.e., they are also converted to an aldehyde derivative. However, the reaction proceeds much more slowly than that of the substrate used in the assay, whose conversion is thus blocked. Examination of the selectivity of the synthesized glycine amides with respect to other amine oxidases showed that they inhibited diamine oxidase, which is structurally related to VAP-1, but only to a much lesser extent. In contrast, the activity of monoamine oxidase A and B was not affected. Selected compounds also inhibited VAP-1 in human plasma. The IC50 values measured were higher than those determined with the bovine enzyme. However, the structure-activity relationships obtained with the glycine amides were similar for both enzymes.

Structure-based design of potent FABP4 inhibitors with high selectivity against FABP3

Fatty-acid binding protein 4 (FABP4) presents an attractive target for therapeutic intervention in metabolic and inflammatory diseases in recent years. However, highly similar three-dimensional structures and fatty acid binding ability of multiple FABP family members pose a significant challenge in design of FABP4-selective inhibitors. Particularly, inhibition of FABP3 raises safety concerns such as cardiac dysfunction and exercise intolerance. Here, we reported the discovery of new FABP4 inhibitors with high selectivity over FABP3 by exploiting the little structural difference in the ligand binding pockets of FABP4 and FABP3. On the basis of our previously reported FABP4 inhibitors with nanomolar potency, different substituents were further introduced to perfectly occupy two sub-pockets of FABP4 that are distinct from those of FABP3. Remarkably, a single methyl group introduction leads to the discovery of compound C3 that impressively exhibits a 601-fold selectivity over FABP3 when maintained nanomolar binding affinity for FABP4. Moreover, C3 also shows good metabolic stability and potent cellular anti-inflammatory activity, making it a promising inhibitor for further development. Therefore, the present study highlights the utility of the structure-based rational design strategy for seeking highly selective and potent inhibitors of FABP4 and the importance of identifying the appropriate subsite as well as substituent for gaining the desired selectivity.

Discovery of flavone-derivatives as the new skeleton of transient receptor potential vanilloid 3 channel antagonists

Transient receptor potential vanilloid 3 (TRPV3) channel is a temperature-sensitive and Ca2+-permeable nonselective cation channel, which is abundantly expressed in skin keratinocyte and plays an important role in skin homeostasis and repair. However, only a few TRPV3 inhibitors were reported. Few selective and potent modulators of the TRPV3 channel have hindered the progress of the investigation and clinical application. TRPV3 channel research still faces challenges and requires the new inhibitors. Flavonoids are a kind of natural compounds with various biological and pharmacological activities including anti-inflammatory and anti allergic effects, which is associated with some physiological effects mediated by TRPV3 channel. Herein, our group designed and synthesized a range of flavone derivatives, and investigated their inhibitory properties on the human TRPV3 channel by electrophysiology technique. Then, we identified a new potent TRPV3 antagonist 2d with IC50 of 0.62 μM. It also showed good selectivity on TRPV1, TRPV4, TRPA1 and TRPM8.

Tuning Carbon Dioxide Reduction Reaction Selectivity of Bi Single-Atom Electrocatalysts with Controlled Coordination Environments

Control over product selectivity of the electrocatalytic CO2 reduction reaction (CO2 RR) is a crucial challenge for the sustainable production of carbon-based chemical feedstocks. In this regard, single-atom catalysts (SACs) are promising materials due to their tunable coordination environments, which could enable tailored catalytic activities and selectivities, as well as new insights into structure-activity relationships. However, direct evidence for selectivity control via systematic tuning of the SAC coordination environment is scarce. In this work, we have synthesized two differently coordinated Bi SACs anchored to the same host material (carbon black) and characterized their CO2 RR activities and selectivities. We find that oxophilic, oxygen-coordinated Bi atoms produce HCOOH, while nitrogen-coordinated Bi atoms generate CO. Importantly, use of the same support material assured that alternation of the coordination environment is the dominant factor for controlling the CO2 RR product selectivity. Overall, this work demonstrates the structure-activity relationship of Bi SACs, which can be utilized to establish control over CO2 RR product distributions, and highlights the promise for engineering atomic coordination environments of SACs to tune reaction pathways.

Tailoring hierarchical nanostructures of tannin acid/alginate beads for straightforward selective recovery of high-purity Au(0) from aqueous solution

The utilization of biomass materials with functional properties and rational porous structures holds significant potential for the recovery of precious metals from secondary resources, while facing challenges in achieving rapid reduction and high recovery rates of metallic Au(0). Herein, a novel concept of achieving high-purity Au(0) efficiently by tailoring tannin acid (TA) architecture and porous structure of TA-functionalized alginate beads (P-TOSA). Optimized by structural engineering, the hierarchically nanostructured P-TOSA beads demonstrate exceptional selectivity and recovery capacity (756.1 ± 2.7 mg/g at pH 5), while maintaining a recovery efficiency of over 99 % across a broad range of pH values (1.0-8.0) through the synergistic combination of chelation-based chemisorption and phenolic groups-based redox reaction. Notably, the TA-based nanostructure-boosted reduced Au(0) served as nucleation sites, facilitating elongation and migration of gold crystals across the vein network, thus forming a shell composed with 90.4 ± 0.4 % of element gold. UV radiation exposure could further generate a dynamic redox system and expedite Au (III) reduction to ultra-high purity Au(0) (93.3 ± 1.1 %) via abnormal grain growth mode. Therefore, this study presents a practical and straightforward approach utilizing biomass microbeads for recycling precious metals in metallic form without the use of toxic eluents or additional reductants.

Discovery of potent and selective c-Met inhibitors for MET-amplified hepatocellular carcinoma treatment

Hepatocellular carcinoma (HCC) is a prevalent and lethal malignancy worldwide. The MET gene, which encodes receptor tyrosine kinase c-Met, is aberrantly activated in various solid tumors, including non-small cell lung cancer and HCC. In this study, we identified a novel c-Met inhibitor 54 by virtual screening and structural optimization. Compound 54 showed potent c-Met inhibition with an IC50 value of 0.45 ± 0.06 nM. It also exhibited high selectivity among 370 kinases and potent anti-proliferative activity against MET-amplified HCC cells. Moreover, compound 54 displayed significant anti-tumor efficacy in vivo, making it a potential candidate for HCC treatment in future studies.

Efficient propane mineralization over unsaturated Pd cluster/CeO2 with prominent C-C cleavage capacity driven by inherent oxygen activation ability

Light alkanes extensively presented in industrial exhausts have led tremendous harm to the atmospheric environment and human health. However, the catalytic destruction of light alkanes generally operates at elevated temperatures and the consequent reaction by-products are inevitably produced. It is therefore of great significance to engineer catalysts with superior thermal stability, internal activity and selectivity. Herein, we developed a Pd cluster/CeO2 catalyst (Pdn/CeO2) by a scalable deposition precipitation strategy, which demonstrates unexpected activity and thermal stability in the presence of 5% H2O attributing to abundant unsaturated Pd metal sites and excellent oxygen dissociation performance. Pdn/CeO2 possesses a highly efficient C-C cleavage capability due to the persistent formation of a large number of oxygen vacancies. In comparison, the Pd1/CeO2 catalyst, which is preferential for C-H bond cleavage and inactive for C-C bond cracking, produces remarkable hazardous organic by-products such as propyne and propylene, inhibiting the continuous decomposition of propane. The present study sheds critical insights into engineering efficient and stable catalysts for light alkane destruction.

Effect of Feature Shape and Dimension of a Confinement Geometry on Selectivity of Electrocatalytic CO2 Reduction

The local confinement effect, which can generate a high concentration of hydroxide ions and reaction intermediates near the catalyst surface, is an important strategy for converting CO2 into multi-carbon products in electrocatalytic CO2 reduction. Therefore, understanding how the shape and dimension of the confinement geometry affect the product selectivity is crucial. In this study, we report for the first time the effect of the shape (degree of confinement) and dimension of the confined space on the product selectivity without changing the intrinsic property of Cu. We demonstrate that geometry influences the outcomes of products, such as CH4 , C2 H4 , and EtOH, in different ways: the selectivity of CH4 and EtOH is affected by shape, while the selectivity of C2 H4 is influenced by dimension of geometry predominantly. These phenomena are demonstrated, both experimentally and through simulation, to be induced by the local confinement effect within the confined structure. Our geometry model could serve as basis for designing the confined structures tailored for the production of specific products.

Enzyme engineering for functional lipids synthesis: recent advance and perspective

Functional lipids, primarily derived through the modification of natural lipids by various processes, are widely acknowledged for their potential to impart health benefits. In contrast to chemical methods for lipid modification, enzymatic catalysis offers distinct advantages, including high selectivity, mild operating conditions, and reduced byproduct formation. Nevertheless, enzymes face challenges in industrial applications, such as low activity, stability, and undesired selectivity. To address these challenges, protein engineering techniques have been implemented to enhance enzyme performance in functional lipid synthesis. This article aims to review recent advances in protein engineering, encompassing approaches from directed evolution to rational design, with the goal of improving the properties of lipid-modifying enzymes. Furthermore, the article explores the future prospects and challenges associated with enzyme-catalyzed functional lipid synthesis.

Ultrasensitive and reversible NO2 gas sensor based on SnS2/TiO2 heterostructures for room temperature applications

Nitrogen dioxide (NO2) is one of the toxic gases produced by chemical industries, power plants, and vehicles. In this work, we demonstrate an inexpensive sensing platform for NO2 detection at room temperature (RT-32 °C) based on a charge transfer mechanism. Three-dimensional hierarchical SnS2 and SnS2/mesoporous TiO2 nanocomposites were synthesized via the solvothermal method. SnS2/20 wt% mesoporous TiO2 nanocomposites sample showed 245.4% enhanced response compared to pristine SnS2. The fabricated device exhibits excellent selectivity among all other interfering gases with one-month stability. The rapid response and enhanced response achieved were obtained for the minimum concentration of 2 ppm NO2. The formation of heterojunction between SnS2 and mesoporous TiO2 has a synergetic effect, providing more active sites and porous structures for the detection of NO2 gas molecules.

Critical layer in liquid-solid system influencing the remediation of chromium using zeolite-supported sulfide nano zero-valent iron

Sulfidated nano zero-valent iron particles were immobilized on ZSM-5 zeolite (Z/S-nZVI) and used for hexavalent chromium (Cr(VI)) remediation. The performance of Z/S-nZVI improved with the increase in Cr(VI) concentration (< 60 mg/L), while the performance significantly decreased for a Cr(VI) concentration of more than 60 mg/L. The adsorption behavior for Cr(VI) was different from that reported in previous studies. The improved performance can be tailored for increasing efficiency of nano zero-valent iron (nZVI) corrosion, while the degree of corrosion of nZVI was affected by the concentration of the pollutant as discussed by kinetics, X-ray diffraction (XRD) and X-ray photoelectron spectrometer (XPS) analyses. The experiments for the dissolution of ferrous ions and the dosage of adsorbent demonstrated that the critical layer in the liquid-solid system changed with the increase in the concentration of Cr(VI) (Cr(VI): Z/S-nZVI > 0.6). Moreover, the removal mechanisms of Cr(VI) were elucidated through XRD, transmission electron microscopy (TEM) and XPS techniques. This results demonstrate that the species of chromium in the critical layer changed from Cr(III) to Cr(VI) as the concentration of chromium increased from low to high. Furthermore, the critical layer was composed of Cr(VI), Fe(II), O and H elements. Additionally, the experiments of coexisting ions and aging time confirmed that Z/S-nZVI possessed high selectivity and stability to ensure efficiency and cost-effectiveness in practical applications.

Compatibility of pesticides with the predatory mite Neoseiulus barkeri

Multiple arthropod pests can affect the same crop in agricultural systems, requiring the integration of control methods. In the present study, the effects of residual exposure to four broad-spectrum insecticides/acaricides (azadiractin, abamectin, chlorfenapyr, and fenpyroximate) on immature (development and survival time) and adult females (longevity, fecundity, and fertility life table parameters) of the predatory mite Neoseiulus barkeri were evaluated. Additionally, the insecticides/acaricides were categorized according to their selectivity based on the classification proposed by the International Organization for Biological Control (IOBC) for assessing the susceptibility of arthropods in laboratory experiments. Method 004, proposed by the Insecticide Resistance Action Committee (IRAC), was adopted for the bioassays with predators exposed to insecticide-acaricide residues. Among the insecticides/acaricides studied, azadirachtin had minimal effects on immature and adult N. barkeri (all non-significant) and was considered harmless based on the classification of toxicity according to the standards/categories proposed by the IOBC. All other insecticides/acaricides affected immature and adult N. barkeri and were considered slightly harmful in terms of toxicity, according to the IOBC.

Discovery of a novel BLT2 antagonist for the treatment of inflammatory airway diseases

Leukotriene B4 (LTB4) is a potent chemoattractant that can recruit and activate immune cells such as neutrophils, eosinophils, and monocytes to sites of inflammation. Excessive production of LTB4 has been linked to acute and chronic inflammatory diseases, including asthma, rheumatoid arthritis, and psoriasis. Inhibiting the binding of LTB4 to its receptors, BLT1 and BLT2, is a potential strategy for treating these conditions. While several BLT1 antagonists have been developed for clinical trials, most have failed due to efficacy and safety issues. Therefore, discovering selective BLT2 antagonists could improve our understanding of the distinct functions of BLT1 and BLT2 receptors and their pharmacological implications. In this study, we aimed to discover novel BLT2 antagonists by synthesizing a series of biphenyl analogues based on a BLT2 selective agonist, CAY10583. Among the synthesized compounds, 15b was found to selectively inhibit the chemotaxis of CHO-BLT2 cells with an IC50 value of 224 nM without inhibiting the chemotaxis of CHO-BLT1 cells. 15b also inhibited the binding of LTB4 and BLT2 with a Ki value of 132 nM. Furthermore, 15b had good metabolic stability in liver microsomes and moderate bioavailability (F = 34%) in in vivo PK studies. 15b also showed in vivo efficacy in a mouse model of asthma, reducing airway hyperresponsiveness by 59% and decreasing Th2 cytokines by up to 46%. Our study provides a promising lead for the development of selective BLT2 antagonists as potential therapeutics for inflammatory airway diseases such as asthma and chronic obstructive pulmonary disease.

Synthesis, cytotoxic activity evaluation and mechanistic investigation of novel 3,7-diarylsubstituted 6-azaindoles

A number of new disubstituted 6-azaindoles have been designed and synthesized bearing a crucial structural modification in respect to an analogous antiproliferative hit compound. The synthesis was performed using 2-amino-3-nitro-4-picoline, that was suitably modified and converted to 7-chloro-3-iodo-6-azaindole and this central scaffold was used for successive Suzuki-type couplings, to result in the target compounds. The evaluation of the cytotoxic activity was performed against four human cancer cell lines, as well as a normal human fibroblast strain. Certain compounds possessed strong anticancer activity without affecting normal cells. At subcytotoxic concentrations for cancer cells, these compounds displayed an anti-proliferative effect by arresting the cells at the G2/M phase of the cell cycle, which could be associated with the observed decrease in the phosphorylation levels of the MEK1- ERK1/2 pathway and/or the activation of the p53-p21WAF1 axis.

Strategies for developing retinoic acid receptor alpha-selective antagonists as novel agents for male contraception

Reported here are the synthesis and in vitro evaluation of a series of 26 retinoic acid analogs based on dihydronaphthalene and chromene scaffolds using a transactivation assay. Chromene amide analog 21 was the most potent and selective retinoic acid receptor α antagonist identified from this series. In vitro evaluation indicated that 21 has favorable physicochemical properties and a favorable pharmacokinetic PK profile in vivo with significant oral bioavailability, metabolic stability, and testes exposure. Compound 21 was evaluated for its effects on spermatogenesis and disruption of fertility in a mouse model. Oral administration of compound 21 at low doses showed reproducibly characteristic albeit modest effects on spermatogenesis, but no effects on fertility were observed in mating studies. The inhibition of spermatogenesis could not be enhanced by raising the dose and lengthening the duration of dosing. Thus, 21 may not be a good candidate to pursue further for effects on male fertility.

3D-QSAR assisted identification of selective CYP1B1 inhibitors: an effective bioisosteric replacement/molecular docking/electrostatic complementarity analysis

Cytochrome P450-1B1 is a majorly overexpressed drug-metabolizing enzyme in tumors and is responsible for inactivation and subsequent resistance to a variety of anti-cancer drugs, i.e., docetaxel, tamoxifen, and cisplatin. In the present study, a 3D quantitative structure-activity relationship (3D-QSAR) model has been constructed for the identification, design, and optimization of novel CYP1B1 inhibitors. The model has been built using a set of 148 selective CYP1B1 inhibitors. The developed model was evaluated based on certain statistical parameters including q2 and r2 which showed the acceptable predictive and descriptive capability of the generated model. The developed 3D-QSAR model assisted in understanding the key molecular fields which were firmly related to the selective CYP1B1 inhibition. A theoretic approach for the generation of new lead compounds with optimized CYP1B1 receptor affinity has been performed utilizing bioisosteric replacement analysis. These generated molecules were subjected to a developed 3D-QSAR model to predict the inhibitory activity potentials. Furthermore, these compounds were scrutinized through the activity atlas model, molecular docking, electrostatic complementarity, molecular dynamics, and waterswap analysis. The final hits might act as selective CYP1B1 inhibitors which could address the issue of resistance. This 3D-QSAR includes several chemically diverse selective CYP1B1 receptor ligands and well accounts for the individual ligand's inhibition affinities. These features of the developed 3D-QSAR model will ensure future prospective applications of the model to speed up the identification of new potent and selective CYP1B1 receptor ligands.

Selective adsorption of mercury ion from water by a novel functionalized magnetic Ti based metal-organic framework composite

In the context of industrialization and severe wastewater pollution, mercury ions pose a major threat due to their high toxicity. However, traditional adsorbents and common metal-organic framework (MOF) materials have limited effectiveness. This study focuses on combining magnetic materials with functionalized titanium-based MOF composite (SNN-MIL-125(Ti)@Fe3O4) to improve mercury ion adsorption. Through comprehensive characterization and analysis, the adsorption performance and mechanism of the material were studied. The optimal adsorption of the material was achieved at pH 5, exhibiting a pseudo-second-order adsorption model and the Hill theoretical capacity of 668.98 mg/g. Hill and Tempkin models confirmed the presence of chemical and physical adsorption sites on the material surface. Thermodynamic experiments showed a spontaneous endothermic process. Despite the presence of interfering ions, the material exhibited high selectivity for mercury ions. After four cycles, adsorption performance decreased by only 8%, indicating excellent reusability. Nitrogen- and sulfur-containing functional groups played a key role in mercury ion adsorption. In conclusion, SNN-MIL-125(Ti)@Fe3O4, as a magnetic MOF adsorption material, showed potential for effective remediation of mercury-contaminated wastewater. This study contributes to the development of efficient adsorption materials and enhances the understanding of their mechanism.

In the quest for histone deacetylase inhibitors: current trends in the application of multilayered computational methods

Histone deacetylase (HDAC) inhibitors have gained attention over the past three decades because of their potential in the treatment of different diseases including various forms of cancers, neurodegenerative disorders, autoimmune, inflammatory diseases, and other metabolic disorders. To date, 5 HDAC inhibitor drugs are marketed for the treatment of hematological malignancies and several drug-candidate HDAC inhibitors are at different stages of clinical trials. However, due to the toxic side effects of these drugs resulting from the lack of target selectivity, active studies are ongoing to design and develop either class-selective or isoform-selective inhibitors. Computational methods have aided the discovery of HDAC inhibitors with the desired potency and/or selectivity. These methods include ligand-based approaches such as scaffold hopping, pharmacophore modeling, three-dimensional quantitative structure-activity relationships (3D-QSAR); and structure-based virtual screening (molecular docking). The current trends involve the application of the combination of these methods and incorporating molecular dynamics simulations coupled with Poisson-Boltzmann/molecular mechanics generalized Born surface area (MM-PBSA/MM-GBSA) to improve the prediction of ligand binding affinity. This review aimed at understanding the current trends in applying these multilayered strategies and their contribution to the design/identification of HDAC inhibitors.

Discovery of a minimalistic DIE-based fluorescent probe for detection of parallel G-quadruplex forms

G-quadruplexes (G4s) are considered to be involved in some key biological processes, leading to the development of a large number of G4 fluorescent probes, which offer possibilities to study G4 dynamics as well as their biological roles. However, the structures of G4s show high polymorphism, which can be classified into parallel, hybrid and antiparallel forms, and the probes targeting a certain topology are limited. In this study, we have developed a minimalistic fluorescent probe by exploiting the disaggregation-induced emission (DIE) principle. The further studies demonstrated that this probe exhibited promising selectivity toward parallel DNA and RNA G4 forms in vitro. Moreover, it was found that this probe could be applied to map the RNA G4s that always form into parallel topologies in live cells, which distinguished it from other reported DIE-based probes that often targeted the mitochondrial or nuclear DNA G4s. To the best of our knowledge, this was the first DIE-based fluorescent probe for mapping cellular RNA G4s.

Focus on the performance enhancement of micro/nanomotor-based biosensors

Micro/nanomotors (MNMs) emerge as a vital candidate for biosensing due to its nano-size structure, high surface-to-area ratio, directional mobility, biocompatibility, and ease of functionalization, therefore being able to detect objects with high efficiency, precision, and selectivity. The driving mode, nanostructure, materials property, preparation technique, and biosensing applications have been thoroughly discussed in publications. To promote the MNMs-based biosensors from in vitro to in vivo, it is necessary to give a comprehensive discussion from the perspective of sensing performances enhancement. However, until now, there is few reviews dedicated to the systematic discussion on the multiple performance enhancement schemes and the current challenges of MNMs-based biosensors. Bearing it in mind and based on our research experience in this field, we summarized the enhancement methods for biosensing properties such as sensitivity, selectivity, detection time, biocompatibility, simplify system operation, and environmental availability. We hope that this review provides the readers with fundamental understanding on performance enhancement schemes for MNMs-based biosensors.

A highly sensitive method for the detection of p-Aminophenol based on Cu-Au nanoparticles and KIO3

BACKGROUND

As a common industrial raw material and chemical intermediate, p-Aminophenol (pAP) is recognized as a serious pollutant that poses harm to both the environment and human health. The traditional detection methods for pAP have the advantages of good selectivity and high sensitivity, but their complex operation and time-consuming defects limit their application in on-site detection. Therefore, it is necessary to develop a simple, low-cost, rapid and high-sensitivity method for the detection of pAP.

RESULTS

Noble metal nanoparticles have been widely used in colorimetric sensing because of their simplicity and practicality. Herein, we presented a simple, excellent sensitive and selective colorimetric method for high-performance detection of pAP based on Cu-Au nanoparticles (Cu-Au NPs) and KIO3. In the presence of pAP, KIO3 was reduced to I2, which subsequently chemically adsorbed onto Cu-Au NPs surface and induced the dispersion and reorganization of Cu-Au NPs, along with prominent color change of the dispersion from gray-blue to pink and the transformation of Cu-Au NPs from chain-like aggregates to individual dispersed, irregular, subspherical nanoparticles. The mechanism was verified by TEM, DLS, Zeta potential, UV-vis and XPS. Meanwhile, Cu-Au NPs probe can rapidly detect pAP within 25 min, the limit of detection of pAP probe is 5 μM by the naked eyes and 0.03 μM by UV-vis absorption spectrum.

SIGNIFICANCE AND NOVELTY

This is the first colorimetric assay for pAP based on Cu-Au NPs probe. The satisfactory linearity (R2 = 0.9984) indicates that the colorimetric probe based on Cu-Au NPs and KIO3 can be utilized for quantitative detection of pAP. The detection results of pAP in real environmental water samples, urine samples and paracetamol tables demonstrate the practicability of pAP colorimetric probe.

Identification of HHT-9041P1: A novel potent and selective JAK1 inhibitor in a rat model of rheumatoid arthritis

Rheumatoid arthritis (RA) is a chronic systemic disease associated with long-term disability and premature mortality. If left untreated, it can seriously affect patients' quality of life. The JAK-STAT signal transduction process is known to affect the occurrence and development of RA, and small molecule JAK inhibitors, such as tofacitinib, have been identified as treatments for RA. However, tofacitinib is a non-selective JAK inhibitor that was found to be associated with dose-limiting tolerability and safety issues, such as anemia in phase 2 dose-ranging studies. Therefore, we developed a selective JAK1 inhibitor, HHT-9041P1, to overcome target-related adverse reactions. We used enzyme and cytokine potency assays in vitro as well as the collagen-induced arthritis (CIA) model in vivo to explore the efficacy and mechanism. In vitro, HHT-9041P1 was diluted (0.017 nM-1 mM) in DMSO) and mixed with JAK1, JAK2, JAK3 or TYK2 kinases for use in the respective assays for inhibitory activity and selectivity evaluation. Fresh human PBMCs were activated and incubated with 100 ng/mL cytokine IL-6 or 20 ng/mL GM-CSF for use in the investigation of the immune mechanism. In vivo, HHT-9041P1 (1 mg/kg, 3 mg/kg and 10 mg/kg) was administered by oral gavage twice daily to CIA model Lewis rats from Day 8 to Day 29 for paw swelling and arthritis score evaluation. At the end of the experiment, the rats were sacrificed before collection of the hind ankle joint, spleen and blood for analysis of inflammation, arthritis phenotypes, inflammatory cytokine expression and Th1 cell proportions. As expected, HHT-9041P1 showed 10-fold greater selectivity for JAK1 over JAK2, and 23-fold greater selectivity over JAK3 in cellular assays. The high selectivity of HHT-9041P1 was also validated by in vivo safety studies. HHT-9041P1 demonstrated significant efficacy in a rat model of collagen-induced arthritis (CIA) and was associated with reduced helper T Cell 1 (Th1) cell differentiation. HHT-9041P1 also exhibited excellent pharmacokinetics properties. Thus, HHT-9041P1 was identified as a candidate for clinical development with many options for the treatment of RA.

Smart and sensitive nanomaterial-based electrochemical sensor for the determination of a poly (ADP-ribose) polymerase (PARP) inhibitor anticancer agent

In this research, we propose a novel approach for constructing a sensitive and selective electrochemical sensor utilizing high-quality multi-walled carbon nanotubes functionalized with amino groups (MWCNT-NH2) for the detection of Talazoparib (TLZ), a poly (ADP-ribose) polymerase (PARP) enzyme inhibitor, in real samples. The MWCNT-NH2-based sensor exhibited remarkable performance characteristics, including excellent repeatability, reproducibility, and high selectivity against various interferences. Under optimized conditions, the sensor demonstrated a wide linear concentration range of 1.0-5.0 μM, with a low limit of detection (LOD) of 0.201 μM. Substantiated by rigorous analysis of pharmaceutical and biological matrices, our methodology emerges as a paragon of reliability, boasting recovery rates within the satisfactory bracket of 96.38-105.25%. The successful application of the MWCNT-NH2-based sensor in practical sample analysis highlights its potential for implementation in clinical and pharmaceutical settings. This research not only advances the application of MWCNT-NH2 in electrochemical sensing but also opens new avenues for the development and monitoring of innovative anticancer treatments. The insights gained from our study have far-reaching implications, pointing toward a future where precision and innovation converge to improve patient care and treatment outcomes.

In-vitro and in-silico studies of annelated 1,4,7,8-tetrahydroazocine ester derivatives as nanomolar selective inhibitors of human butyrylcholinesterase

Based on previous finding showing 2,3,6,11-tetrahydro-1H-azocino[4,5-b]indole as suitable scaffold of novel inhibitors of acetylcholinesterase (AChE), a main target of drugs for the treatment of Alzheimer's disease and related dementias, herein we investigated diverse newly and previously synthesized β-enamino esters (and ketones) derivatives of 1,4,7,8-tetrahydroazocines (and some azonines) fused with benzene, 1H-indole, 4H-chromen-4-one and pyrimidin-4(3H)-one. Twenty derivatives of diversely annelated eight-to-nine-membered azaheterocyclic ring, prepared through domino reaction of the respective tetrahydropyridine and azepine with activated alkynes, were assayed for the inhibitory activity against AChE and butyrylcholinesterase (BChE). As a major outcome, compound 7c, an alkylamino derivative of tetrahydropyrimido[4,5-d]azocine, was found to be a highly potent BChE-selective inhibitor, which showed a noncompetitive/mixed-type inhibition mechanism against human BChE with single digit nanomolar inhibition constant (Ki = 7.8 ± 0.2 nM). The four-order magnitude BChE-selectivity of 7c clearly reflects the effect of lipophilicity upon binding to the BChE binding cavity. The ChEs' inhibition data, interpreted by chemoinformatic tools and an in-depth in-silico study (molecular docking combined with molecular dynamics calculations), not only highlighted key structural factors enhancing inhibition potency and selectivity toward BChE, but also shed light on subtle differences distinguishing the binding sites of equine BChE from the recombinant human BChE. Compound 7c inhibited P-glycoprotein with IC50 of 0.27 μM, which may support its ability to permeate blood-brain barrier, and proved to be no cytotoxic in human liver cancer cell line (HepG2) at the BChE bioactive concentrations. Overall, the biological profile allows us to envision 7c as a promising template to improve design and development of BChE-selective ligands of pharmaceutical interest, including inhibitors and fluorogenic probes.

A novel hydrangea-like magnetic composite Fe3O4@MnO2@ZIF-67 for efficient selective adsorption of Pd(II) from metallurgical wastewater

The selective adsorption of palladium from wastewater is a feasible solution to solving palladium pollution and resource scarcity. Because traditional solvent extraction methods often involve the use of considerable amounts of organic solvents, research is focused on investigating adsorption techniques that can selectively remove palladium from wastewater. In this paper, the magnetic composite Fe3O4@MnO2@ZIF-67 was synthesized and its performance for the adsorption of Pd(II) in acidic water was investigated. Fe3O4@MnO2@ZIF-67 was characterized by various analytical methods such as TEM, SEM, EDS, BET, XRD, FTIR, zeta potential analysis, VSM, and TGA. The effects of palladium ion concentration, contact time, pH, and temperature on adsorption were evaluated. The kinetics were shown to follow the pseudo-second-order kinetic model and Elovich model, and the rate-limiting step was chemisorption. Thermodynamic studies showed that increasing the temperature promoted the adsorption of Pd(II), and the maximum uptake capacity of Fe3O4@MnO2@ZIF-67 for Pd(II) was 531.91 mg g-1. Interestingly, Fe3O4@MnO2@ZIF-67 exhibited superior selectivity for Pd(II) in the presence of Ir(IV), Pt(IV), and Rh(III). The adsorbent can be used repeatedly for selective adsorption of palladium. Even at the fifth cycle, the uptake rate of Pd(II) remained as high as 83.1%, and it showed a favorable adsorption capacity and selectivity for Pd(II) in real metallurgical wastewater. The adsorption mechanism was analyzed by SEM, FTIR, XRD, XPS, and DFT calculations, which indicated that electrostatic interactions and coordination with nitrogen-containing groups were involved. Fe3O4@MnO2@ZIF-67 is a promising adsorbent for the efficient adsorption and selective separation of palladium ions.

Targeted Polymeric Nanoparticles as a Strategy for the Treatment of Glioblastoma: A Review

Glioblastoma multiforme is the most common and aggressive malignant tumor that affects the central nervous system, with high mortality and low survival. Glioblastoma multiforme treatment includes resection tumor surgery, followed by radiotherapy and chemotherapy adjuvants. However, the drugs used in chemotherapy present some limitations, such as the difficulty of crossing the bloodbrain barrier and resisting the cellular mechanisms of drug efflux. The use of polymeric nanoparticles has proven to be an effective alternative to circumvent such limitations, as it allows the exploration of a range of polymeric structures that can be modified in order to control the biodistribution and cytotoxic effect of the drug delivery systems. Nanoparticles are nanometric in size and allow the incorporation of targeting ligands on their surface, favoring the transposition of the blood-brain barrier and the delivery of the drug to specific sites, increasing the selectivity and safety of chemotherapy. The present review has described the characteristics of chitosan, poly(vinyl alcohol), poly(lactic-coglycolic acid), poly(ethylene glycol), poly(β-amino ester), and poly(ε-caprolactone), which are some of the most commonly used polymers in the manufacture of nanoparticles for the treatment of glioblastoma multiforme. In addition, some of the main targeting ligands used in these nanosystems are presented, such as transferrin, chlorotoxin, albumin, epidermal growth factor, and epidermal growth factor receptor blockers, explored for the active targeting of antiglioblastoma agents.

Electronic structure analysis of NiO quantum dot-modified jackfruit-shaped ZnO sensors and sensing properties investigation of their highly sensitive and selective for butyl acetate

Detection of flammable, explosive and toxic butyl acetate helps to avoid accidents and protect health in industrial production. However, there are few reports on butyl acetate sensors, especially highly sensitive, low detection limit and highly selective ones. In this work, density functional theory (DFT) analyzes the electronic structure of sensing materials and the adsorption energy of butyl acetate. The effects of Ni element doping, oxygen vacancy constructions, and NiO quantum dot modifications on the modulation of the electronic structure of ZnO and on the adsorption energy of butyl acetate are investigated in detail. Based on the DFT analysis, the NiO quantum dot modified jackfruit-shaped ZnO is synthesized via thermal solvent method reduction. The NiO/ZnO sensor has a response 502.5 for 100 ppm butyl acetate with 100 ppb detection limit, and the response for 100 ppm butyl acetate is at least 6.2 times higher than 100 ppm methanol, 100 ppm benzene, 100 ppm triethylamine, 100 ppm isopropanol, 100 ppm ethyl acetate and 100 ppm formic acid. X-ray photoelectron spectroscopy (XPS) explores the change of oxygen vacancies in sensor accompanied with the addition of Ni element and reveales the reason for the change of oxygen vacancies.

High dispersion dendritic fibrous morphology nanospheres for electrochemical CO2 reduction to C2H4

The electrochemical CO2 reduction to specific multi-carbon product on copper-based catalysts is subjected to low activity and poor selectivity. Herein, catalyst structure, morphology, and chemical component are systematically studied for bolstering the activity and selectivity of as-prepared catalyzers in this study. Dendritic fibrous nano-silica spheres favor the loading of active species and the transport of reactant from the central radial channel. Cu/DFNS with high dispersion active sites are fabricated through urea-assisted precipitation way. The coexistence of Cu(I)/Cu(II) induces a close combination of Cu active sites and CO2 on the Cu/DFNS interface, promoting the CO2 activation and CC coupling. The Cu-O-Si interface (Cu phyllosilicate) can improve CO2 and CO attachment. Cu/DFNS show the utmost Faradaic efficiency of C2H4 with a value of 53.04% at -1.2 V vs. RHE. And more importantly, in-situ ATR-SEIRAS reveals that the CC coupling is boosted for effectively producing C2H4 as a consequence of the existence of *COL, *COOH, and *COH intermediates. The mechanism reaction path of Cu/DFNS is inferred to be *CO2 → *COOH → *CO → *CO*COH → C2H4. Our findings will be helpful to gain insight into the links between morphology, texture, chemical component of catalyzers, and electrochemical reduction of CO2, providing valuable guidance in the design of more efficient catalysts.

Tetrahydro-β-carboline derivatives as potent histone deacetylase 6 inhibitors with broad-spectrum antiproliferative activity

A series of tetrahydro-β-carboline (THβC)-based hydroxamic acids were rationally designed and synthesized as novel selective HDAC6 inhibitors (sHDAC6is) by the application of scaffold hopping strategy. Several THβC analogues were highly potent (IC50 < 5 nM) and selective against HDAC6 enzyme and exhibited good antiproliferative activity against human multiple myeloma (MM) cell. Molecular docking interpreted the structure activity relationship (SAR). Target engagement of HDAC6 was confirmed in RPMI-8226 cells using the WB assay. In vitro, (1S, 3R)-1-(4-chlorophenyl)-N-(4-(hydroxycarbamoyl)benzyl)-2,3,4,9-tetrahydro-1H-pyrido[3, 4-b]indole-3-carboxamide (14g) showed potent broad antiproliferative activity against various tumors including leukemia, colon cancer, melanoma, and breast cancer cell lines, better than ACY-1215. Moreover, 14g also showed good pharmacokinetics properties in mice via oral administration.

Developing an analytical method for quantification of trientine based on modified silver nanoparticles

Trientine or (N,N´-bis(2-aminoethyl)-1,2-ethanediamine (TETA) is a copper chelator and used in Wilson's disease, is aliphatic amine that does not have UV absorbing groups. In this study, the modified silver nanoparticles (AgNPs) by sodium lauryl sulfate have been used to develop an analytical method for quantification of TETA. Different concentrations of TETA were added into a particular concentration of AgNPs and absorbance of each sample was measured at 397 nm under the optimal conditions which include pH, time, salt and AgNPs volume. It was optimized by a design of experiments using response surface methodology. Then, the calibration curve was obtained based on the concentrations of TETA solution versus decrease in the absorbance of AgNPs. Selectivity of the developed method was performed in plasma and presence of common cations i.e. copper, zinc and ferrous. Under optimum conditions, linear range of this method was between 10 and 40 ng.mL- 1 with correlation coefficient (R2) of 0.996 with limit of detection and quantification of 3 ng.mL- 1 and 10 ng.mL- 1, respectively. Selectivity of established method in presence of cations eliminated by diluting because of high sensitivity of the established analytical techniques based on AgNPs. This method is suitable and low costing for quantification of TETA and does not require high equipment.

An overview of phosphodiesterase 9 inhibitors: Insights from skeletal structure, pharmacophores, and therapeutic potential

Cyclic nucleotide phosphodiesterase 9 (PDE9), a specifically hydrolytic enzyme with the highest affinity for cyclic guanosine monophosphate (cGMP) among the phosphodiesterases family, plays a critical role in many biological processes. Consequently, the development of PDE9 inhibitors has received increasing attention in recent years, with several compounds undergoing clinical trials for the treatment of central nervous system (CNS) diseases such as Alzheimer's disease, schizophrenia, and psychotic disorders, as well as heart failure and sickle cell disease. This review analyzes the recent primary literatures and patents published from 2004 to 2023, focusing on the structure, pharmacophores, selectivity, and therapeutic potential of PDE9 inhibitors. It hoped to provide a comprehensive overview of the field's current state to inform the development of novel PDE9 inhibitors.

Inhibition of AKR1Cs by liquiritigenin and the structural basis

In vivo and in vitro studies have confirmed that liquiritigenin (LQ), the primary active component of licorice, acts as an antitumor agent. However, how LQ diminishes or inhibits tumor growth is not fully understood. Here, we report the enzymatic inhibition of LQ and six other flavanone analogues towards AKR1Cs (AKR1C1, AKR1C2 and AKR1C3), which are involved in prostate cancer, breast cancer, and resistance of anticancer drugs. Crystallographic studies revealed AKR1C3 inhibition of LQ is related to its complementarity with the active site and the hydrogen bonds net in the catalytic site formed through C7-OH, aided by its nonplanar and compact structure due to the saturation of the C2C3 double bond. Comparison of the LQ conformations in the structures of AKR1C1 and AKR1C3 revealed the induced-fit conformation changes, which explains the lack of isoform selectivity of LQ. Our findings will be helpful for better understanding the antitumor effects of LQ on hormonally dependent cancers and the rational design of selective AKR1Cs inhibitors.

IUPHAR themed review: Opioid efficacy, bias, and selectivity

Drugs acting at the opioid receptor family are clinically used to treat chronic and acute pain, though they represent the second line of treatment behind GABA analogs, antidepressants and SSRI's. Within the opioid family mu and kappa opioid receptor are commonly targeted. However, activation of the mu opioid receptor has side effects of constipation, tolerance, dependence, euphoria, and respiratory depression; activation of the kappa opioid receptor leads to dysphoria and sedation. The side effects of mu opioid receptor activation have led to mu receptor drugs being widely abused with great overdose risk. For these reasons, newer safer opioid analgesics are in high demand. For many years a focus within the opioid field was finding drugs that activated the G protein pathway at mu opioid receptor, without activating the β-arrestin pathway, known as biased agonism. Recent advances have shown that this may not be the way forward to develop safer analgesics at mu opioid receptor, though there is still some promise at the kappa opioid receptor. Here we discuss recent novel approaches to develop safer opioid drugs including efficacy vs bias and fine-tuning receptor activation by targeting sub-pockets in the orthosteric site, we explore recent works on the structural basis of bias, and we put forward the suggestion that Gα subtype selectivity may be an exciting new area of interest.

Synthesis and performance analysis of zeolitic imidazolate frameworks for CO2 sensing applications

In this paper, we investigate the potential use of Zeolitic Imidazolate Frameworks (ZIF-8) as a sensing material for CO2 detection. Three synthesis techniques are considered for the preparation of ZIF-8, namely room temperature, microwave-assisted, and ball milling. The latter is a green and facile alternative for synthesis with its solvent-free, room-temperature operation. In addition, ball milling produces ZIF-8 samples with superior CO2 adsorption and detection characteristics, as concluded from fluorescence measurements. Characterization tests including X-ray diffraction (XRD), Fourier transform infrared (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FE-SEM) and Energy-dispersive X-ray spectroscopy (EDS) are conducted to inspect the structural morphology, the thermal stability, and elements content of the ZIF-8 samples obtained from the different aforementioned synthesis techniques. The characterization tests revealed the appearance of a new phase of ZIF-8 which is ZIF-L when deploying the ball milling technique with different structure, morphology, response to CO2 exposure and thermal stability when compared to its counterparts. Fluorescence measurements are carried out to evaluate the limit of detection (LOD), selectivity, and recyclability of the different ZIF-8 samples. The LOD of the ZIF-8 sample synthesized based on ball milling synthesis technique is 815.2 ppm, while LODs of the samples obtained from microwave and room temperature-based synthesis techniques are 1780.6 ppm and 723.8 ppm, respectively. This indicates that the room temperature and ball milling produced MOFs have comparable LODs. However, the room temperature procedure requires the use of a harmful solvent. The range of LOD demonstrates the suitable use of ZIF-8 for indoor air quality monitoring and other industrial applications.

Rational design of electrocatalytic system to selective transform nitrate to nitrogen

Nitrate (NO3-) is one of the most common pollutants in natural bodies of water and as such threatens both human health and the safety of aquatic environment. There are efficient electrochemical techniques to directly remove NO3-, but inexpensive, selective and electrocatalytic strategies to eliminate NO3- by converting it into benign nitrogen (N2) remain challenging. This work studied Cu particles that were formed directly on a Ni foam (Cu-NF) and evaluated their electrocatalytic NO3- reduction performance. The use of carbon nanotubes (CNT) functionalized with titanium suboxides (TiSO) as the anode facilitated the generation of active chlorine species that had a key role in the removal of NH4+. An electrochemical system that integrated a Cu-NF cathode with a TiSO-CNT anode could remove 88.5% of NO3- with a >99% N2 selectivity when operated over 6 h (4.1 × 10-4 h-1) at a potential of -1.2 V vs Ag/AgCl. Because the chloride ions are very common in natural sources of water, this technique offers a sustainable and environmentally friendly approach for the removal of NO3- from contaminated water sources.

Complexation-based selectivity of organic phosphonates adsorption from high-salinity water by neodymium-doped nanocomposite

Organic phosphonates have been widely used in various industries and are ubiquitous in wastewaters, and efficient removal of phosphonates is still a challenge for the conventional processes because of the severe interferences from the complex water constitutions. Herein, an Nd-based nanocomposite (HNdO@PsAX) was fabricated by immobilizing hydrated neodymium oxide (HNdO) nanoparticles inside a polystyrene anion exchanger (PsAX) to remove phosphonates from high-salinity aqueous media. Batch experiments demonstrated that HNdO@PsAX had an excellent adsorption capacity (∼90.5 mg P/g-Nd) towards a typical phosphonate (1-hydrox-yethylidene-1,1-diphosphonic acid, HEDP) from the background of 8 g/L NaCl, whereas negligible HEDP adsorption was achieved by PsAX. Attractively, various coexisting substances (humic acid, phosphate, citrate, EDTA, metal ligands, and anions) exerted negligible effects on the HEDP adsorption by HNdO@PsAX under high salinity. FT-IR and XPS analyses revealed that the inner-sphere complexation between HEDP and the immobilized HNdO nanoparticles is responsible for HEDP adsorption. Fixed-bed experiments further verified that HNdO@PsAX was capable of successively treating more than 4500 bed volumes (BV) of a synthetic high-salinity wastewater (1.0 mg P/L of HEDP), whereas only ∼2 BV of effective treatment capacity was received by PsAX. The exhausted HNdO@PsAX was amenable to a complete regeneration by a binary NaOHNaCl solution without significant loss in capacity. The capability in removing other organic phosphonates and treating a real electroplating wastewater by HNdO@PsAX was further validated. Generally, HNdO@PsAX exhibited a great potential in efficiently removing phosphonates from high-salinity wastewater.

Novel 4-(2-arylidenehydrazineyl)thienopyrimidine derivatives as anticancer EGFR inhibitors: Design, synthesis, biological evaluation, kinome selectivity and in silico insights

The current study discovered fifteen new thieno[2,3-d]pyrimidine derivatives with potential anticancer action, including 5a-l, 6, and 7a-b. Results from the NCI screening revealed that compounds 5f-i and 7a significantly inhibited the proliferation of MDA-MB-468 cells at mean GI% and GI50 levels. Compared to staurosporine, these compounds (5f-i and 7a) demonstrated better safety towards typical WI-38 cells. Compounds 5g and 7a demonstrated the highest inhibition (two-digit nanomolar) when compared to erlotinib when their potency was tested on EGFR kinase. Considering the outcomes above, 5g was examined for its ability to disrupt the cell cycle with trigger apoptosis in breast cancer MDA-MB-468 cell lines. The apoptosis markers Bax, Bcl-2, Caspase-8, and Caspase-9, were detected. In silico molecular docking and dynamic simulation were used to explainthe biological activities of the most potent compound.

Fabrication of electrospun cellulose/chitosan/ball-milled bone char membranes for efficient and selective sorption of Pb(II) from aqueous solutions

Separation materials have received increasing attention given their broad applications in the management of environmental pollution. It is desired to balance the contradiction between high separation efficiency and selectivity of separation materials. The integration of ball-milled bone chars with electrospun membranes might achieve this balance. In this study, electrospun cellulose/chitosan/ball-milled bone char (CL/CS/MB) membranes were by well-dispersing ball-milled bone chars with nanoscale size (98.9-167.5 nm) and developed porosity (40.2-373.1 m2/g) in the electrospinning solvent. The synergistic integration of distributed MBs (5.4-31.5 wt.% of loading hydroxyapatite on the membrane matrix) allowed the efficient sorption of Pb(II) with fast kinetics (20.0 min), excellent capacity (219.9 mg/g at pH 5.0, T 298 K), and favorable selectivity coefficients (2.76-6.79). The formation of minerals was dominant for the selective sorption of Pb(II) by combining the spectral analysis and quantitative determination. The surface complexation with O-/reductive N-species, the cation exchange with inorganic Ca2+, the electrostatic attraction with deprotonated O-, and the cation-π coordination with the aromatic carbon via the π-electrons should be not ignored for the capture of Pb(II). This work demonstrated the feasibility of electrospun CL/CS/MB membranes as a promising candidate for the remediation of aquatic pollutants.

Efficient and selective capture of Au(III) from PCBs by pentaethylenehexamine-modified chloromethylated polystyrene beads

Recycling of gold promotes solving the problems of resource waste and environmental pollution. In this work, pentaethylenehexamine (PEHA)-modified chloromethylated polystyrene beads (PEHA-CMPS) was synthesized for the recovery of Au(III) from actual printed circuits boards (PCBs) leaching solution. PEHA-CMPS exhibited excellent adsorption efficiency at a wide pH range. It was discovered that the pseudo-second-order and Langmuir model provided a superior match for the Au(III) adsorption process. The maximum adsorption capacity for Au(III) was 1186 mg/g. Furthermore, PEHA-CMPS was able to selectively capture trace Au(III) with recovery efficiencies of above 80% from the actual PCBs leaching solution. In addition, the column separation approach was utilized to better assess the practical applications for PEHA-CMPS, proving that the prepared adsorbent exhibited great prospects in industrial applications. The adsorption efficiency still maintained 95% after five adsorption-desorption cycles. The FTIR, XRD, and XPS analyses demonstrated that Au(III) uptake on PEHA-CMPS was a collaborative process involving electrostatic interaction, chelation, and oxidation-reduction. The PEHA-CMPS provided a promising strategy in Au(III) recovery and environmental remediation.

Design, synthesis and bioactivity investigation of peptide-camptothecin conjugates as anticancer agents with a potential to overcome drug resistance

Camptothecin (CPT) is a natural plant alkaloid from Camptotheca that exhibits a potent anticancer activity. However, its continued utilization is hindered by drawbacks such as low water solubility and restricted tumor selectivity. Cationic anticancer peptides (CAPs) are generally soluble in water, and exhibit favorable selectivity against malignant cells. In previous study, we have reported a CAP termed KM8-Aib present conspicuous selective anticancer effect. Thus, it is postulated conjugating KM8-Aib with CPT might be a plausible approach to improve the defects of CPT. A series of peptide-CPT conjugates were synthesized and subjected to biological evaluation. Among these compounds, Kb-CC07 displayed the highest selective activity against a set of cancer cell lines including drug-resistant cells, showing the IC50 values in the 0.11-1.01 μM range which is 1.9-22.6 times better than that of CPT, and a wide therapeutic index of 124.5 (vs 5.3 for CPT). The water solubility of Kb-CC07 was also improved by ∼ 100 fold compared with CPT. Further investigation unraveled that Kb-CC07 could effectively penetrate across plasma membranes and delivered more CPT molecules into cancer cells, overcoming the drug-resistance result from efflux drug transporters on tumor surface. In vivo experiments supported that Kb-CC07 has excellent in vivo antiproliferative activity against drug-resistant tumors over CPT (tumor growth inhibition of 98.2% and 37.5% for Kb-CC07 and CPT, respectively, at 5 μmol·kg-1), and prompts CPT accumulation in tumor tissue rather than normal organs, thus producing limited toxicities. To sum up, coupling therapeutic agents to CAPs would be a potential strategy to conquer the shortcomings of anticancer drugs. Additionally, Kb-CC07 is suggested to be a promising anticancer candidate deserving further investigation.

Catalytic ipso-Nitration of Organosilanes Enabled by Electrophilic N-Nitrosaccharin Reagent

Nitroaromatic compounds represent one of the essential classes of molecules that are widely used as feedstock for the synthesis of intermediates, the preparation of nitro-derived pharmaceuticals, agrochemicals, and materials on both laboratory and industrial scales. We herein disclose the efficient, mild, and catalytic ipso-nitration of organotrimethylsilanes, enabled by an electrophilic N-nitrosaccharin reagent and allows chemoselective nitration under mild reaction conditions, while exhibiting remarkable substrate generality and functional group compatibility. Additionally, the reaction conditions proved to be orthogonal to other common functionalities, allowing programming of molecular complexity via successive transformations or late-stage nitration. Detailed mechanistic investigation by experimental and computational approaches strongly supported a classical electrophilic aromatic substitution (SE Ar) mechanism, which was found to proceed through a highly ordered transition state.

HDAC9 as a Privileged Target: Reviewing its Role in Different Diseases and Structure-activity Relationships (SARs) of its Inhibitors

HDAC9 is a histone deacetylase enzyme belonging to the class IIa of HDACs which catalyses histone deacetylation. HDAC9 inhibit cell proliferation by repairing DNA, arresting the cell cycle, inducing apoptosis, and altering genetic expression. HDAC9 plays a significant part in human physiological system and are involved in various type of diseases like cancer, diabetes, atherosclerosis and CVD, autoimmune response, inflammatory disease, osteoporosis and liver fibrosis. This review discusses the role of HDAC9 in different diseases and structure-activity relationships (SARs) of various hydroxamate and non-hydroxamate-based inhibitors. SAR of compounds containing several scaffolds have been discussed in detail. Moreover, structural requirements regarding the various components of HDAC9 inhibitor (cap group, linker and zinc-binding group) has been highlighted in this review. Though, HDAC9 is a promising target for the treatment of a number of diseases including cancer, a very few research are available. Thus, this review may provide useful information for designing novel HDAC9 inhibitors to fight against different diseases in the future.

Regioselective and Enantioselective Copper-Catalyzed Hydroaminocarbonylation of Unactivated Alkenes and Alkynes

Given the prevalence of amide backbones in marketed pharmaceuticals and their ubiquity as critical binding units in natural peptides and proteins, it remains important to develop novel methods to construct amide bonds. We report here a general method for the anti-Markovnikov hydroaminocarbonylation of unactivated alkenes under mild conditions, using copper catalysis in combination with hydroxylamine electrophile reagents and poly(methylhydrosiloxane) (PMHS) as a cheap and environmentally friendly hydride source. The reaction tolerates a variety of functional groups and efficiently converts unactivated terminal alkenes, 1,1-disubstituted alkenes, and cyclic alkenes to the corresponding amides with exclusive anti-Markovnikov selectivity (and high enantioselectivities/diastereoselectivities). Additionally, with minimal modification of the reaction conditions, alkynes can also undergo tandem hydrogenation-hydroaminocarbonylation to alkyl amides.

Improved recovery selectivity of rare earth elements from mining wastewater utilizing phytosynthesized iron nanoparticles

While rare earth elements (REEs) play key roles in many modern technologies, the selectivity of recovering of REEs from mining wastewater remains a critical problem. In this study, iron nanoparticles (FeNPs) synthesized from euphorbia cochinchinensis extracts were successfully used for selective recovery of REEs from real mining wastewater with removal efficiencies of 89.4% for Y(III), 79.8% for Ce(III) and only 6.15% for Zn(Ⅱ). FTIR and XPS analysis suggested that the high selective removal efficiency of Y(III) and Ce(III) relative to Zn(Ⅱ) on FeNPs was due to a combination of selective REEs adsorption via complexing with O or N, ion exchange with H+ present in functional groups contained within the capping layer and electrostatic interactions. Adsorptions of Y(III) and Ce(III) on FeNPs conformed to pseudo second-order kinetics and the Langmuir isotherm model with maximum adsorption capacities of 5.10 and 0.695 mg∙g-1, respectively. The desorption efficiencies of Y(III) and Ce(III) were, respectively, 95.0 and 97.9% in 0.05 M acetic acid, where desorption involved competitive ion exchange between Y(III), Ce(III) and Zn(Ⅱ) with H+ contained in acetic acid and intraparticle diffusion. After four consecutive adsorption-desorption cycles, adsorption efficiencies for Y(III) and Ce(III) remained relatively high at 52.7% and 50.1%, respectively, while desorption efficiencies of Y(III) and Ce(III) were > 80.0% and 95.0%, respectively. Overall, excellent reusability suggests that FeNPs can practically serve as a potential high-quality selectivity material for recovering REEs from mining wastewaters.

Determining the selectivity of a tetra-phosphorylated biomimetic peptide towards uranium in the presence of competing cations through the simultaneous coupling of HILIC to ESI-MS and ICP-MS

A cyclic tetra-phosphorylated biomimetic peptide (pS1368) has been proposed as a promising starting structure to design a decorporating agent of uranyl (UO22+) due to its affinity being similar to that of osteopontin (OPN), a target UO22+ protein in vivo. The determination of this peptide's selectivity towards UO22+ in the presence of competing endogenous elements is also crucial to validate this hypothesis. In this context, the selectivity of pS1368 towards UO22+ in the presence of Ca2+, Cu2+ and Zn2+ was determined by applying the simultaneous coupling of hydrophilic interaction chromatography (HILIC) to electrospray ionization (ESI-MS) and inductively coupled plasma (ICP-MS) mass spectrometry. Sr2+ was used as Ca2+ simulant, providing less challenging ICP-MS measurements. The separation of the complexes by HILIC was first set up. The selectivity of pS1368 towards UO22+ was determined in the presence of Sr2+, by adding several proportions of the latter to UO2(pS1368). UO22+ was not displaced from UO2(pS1368) even in the presence of a ten-fold excess of Sr2+. The same approach has been undertaken to demonstrate the selectivity of pS1368 towards UO22+ in the presence of Cu2+, Zn2+ and Sr2+ as competing endogenous cations. Hence, we showed that pS1368 was selective towards UO22+ in the presence of Sr2+, but also in the presence of Cu2+ and Zn2+. This study highlights the performance of HILIC-ESI-MS/ICP-MS simultaneous coupling to assess the potential of molecules as decorporating agents of UO22+.

Imidacloprid: Impact on Africanized Apis mellifera L. (Hymenoptera: Apidae) workers and honey contamination

Apis mellifera L. (Hymenoptera: Apidae) is fundamental in the production chain, ensuring food diversity through the ecosystem service of pollination. The aim of this work was to evaluate the impact of imidacloprid, orally, topically, and by contact, on A. mellifera workers and to verify the presence of this active ingredient in honey. Toxicity levels were verified by bioassays. In bioassay 1, the levels correspond to the percentages of 100, 10, 1, 0.1, and 0.01% of the recommended concentration for field application of the commercial product Nortox® (active ingredient imidacloprid), with which we obtained the mean lethal concentration (LC50) in 48 h for A. mellifera, determining the concentration ranges to be used in the subsequent bioassays. Bioassays 2 and 3 followed the guidelines of the Organization for Economic Cooperation and Development, which specify the LC50 (48 h). In bioassay 4, the LC50 (48 h) and the survival rate of bees for a period of 120 h were determined by contact with a surface contaminated with imidacloprid, and in bioassay 5, the interference of the insecticide with the flight behavior of bees was evaluated. Honey samples were collected in agroecological and conventional georeferenced apiaries and traces of the imidacloprid were detected by means of high-performance liquid chromatography (HPLC-UV) with extraction by SPE C18. Bee survival was directly affected by the concentration and exposure time, as well behavioral performance, demonstrating the residual effect of imidacloprid on A. mellifera workers. Honey samples from a conventional apiary showed detection above the maximum residue limits (MRL) allowed by the European Union (0.05 μg mL-1), but samples from other apiaries showed no traces of this insecticide. Imidacloprid affects the survival rate and behavior of Africanized A. mellifera and honey quality.

Molecularly imprinted composite membranes with interleaved imprinted network structure for highly selective separation of acteoside

Acteoside (ACT) is one of the phenylethanoid glycosides in Cistanche tubulosa. The ACT molecules have high medicinal value, but the content of ACT is scarce. Therefore, it is imperative to develop the ACT-based molecularly imprinted composite membranes (A-MICMs) with highly selective separation of ACT. In this study, the amine-polyhedral oligomeric sesquisiloxanes (NH2-POSS) were uniformly introduced into polydopamine modified polyvinylidene fluoride (pDA@PVDF) membranes to fabricate NH2-POSS-pDA@PVDF. Then, the ACT-imprinted layers were synthesized on the surface of NH2-POSS-pDA@PVDF to obtain A-MICMs. The results showed that the optimal conditions were 180 mg DA, 12 h DA self-polymerization time, 400 mg NH2-POSS and 10 h washing time for the synthesis of A-MICMs. The results of adsorption isotherm experiments showed that there was a single layer adsorbate analyte on the A-MICMs. The results of adsorption kinetic experiments showed that chemisorption mechanism played a major function in the adsorption process of A-MICMs for ACT. The A-MICMs exhibited the maximum rebinding capacity of 98.37 mg⋅g-1, an excellent rebinding selectivity of 4.63, and the permselectivity of 7.02. The same A-MICMs kept 95.99% of the maximum rebinding capacity for ACT after 5 adsorption-desorption cycles. The designed A-MICMs with the interleaved imprinted network structure have a potential to be applied to the highly selective separation of bioactive components from natural products.

Selective miRNA quantitation with high-temperature thermal gel electrophoresis

MicroRNAs (miRNAs) are short non-coding RNAs that control gene expression and correlate to the prognosis of numerous diseases. To support research efforts elucidating the roles of miRNAs in pathogenesis, rapid and inexpensive analytical methods are required to quantify miRNAs from biological samples. The challenge of developing new analyses with these time and cost constraints is compounded by the short sequence lengths and high degrees of homology between miRNAs that hinder detection selectivity. This report describes the development of a high-temperature thermal gel electrophoresis (TGE) method to rapidly quantify miRNAs with single-nucleotide resolution using low-cost microfluidic devices. Fluorescent probes were designed for three miRNAs that differed in sequence by one or two nucleotides. A microfluidic analysis was optimized to enrich miRNA-probe hybrids into a high-concentration band and then automatically initiate a separation to resolve each species. Analyses conducted at 30 °C exhibited significant off-target hybridization, as the different-yet-structurally-similar miRNAs bound to each probe, which biased measurements. To overcome this problem, the stability of thermal gels at elevated temperatures was exploited to conduct analyses. At 50 °C, off-target hybrids melted to prevent their detection without impeding the enrichment or separation of on-target hybrids. Selectivity studies validated that high-temperature TGE prevented off-target hybrids from interfering with the quantitative responses of the target miRNAs. This work demonstrates that TGE affords rapid, highly selective analyses of structurally similar miRNAs in low-complexity microfluidic devices, which is expected to facilitate diverse biomedical research.