Operational data of the Star City rainwater harvesting system and its role as a climate change adaptation and a social influence

The Star City rainwater harvesting system (RWHS) was featured in the December, 2008, issue of Water 21. The article highlighted that the RWHS has a 3,000 m3 rainwater tank used in water saving, flood mitigation, and emergency response. Since then, many news media, public officials, and people from both South Korea and abroad have visited the RWHS. In this paper, two years of the system's operational data are presented and its role in short- and long-term climate change adaptation is investigated. The downstream sewer system has become safe for a 50-year rainfall without upgrading the existing sewer system, which was designed for a 10-year period. The 26,000 m3 of water saved has reduced the energy requirement of transferring water from a distant area. The success of the Star City RWHS has influenced 47 cities across South Korea, including Seoul, to enact regulations on rainwater management. It has shown that decentralized rainwater management can supplement the existing centralized system to ensure its safety.

Quality assessment of rooftop runoff and harvested rainwater from a building catchment

A major obstacle to the promotion of rainwater harvesting is chemical and microbiological concerns. To determine its suitability as an alternative water resource, water quality parameters such as pH, turbidity and metal ion concentrations and counted total coliform, Escherichia coli and heterotrophic bacteria were measured. It was observed that the stored rainwater had a neutral average pH and that its turbidity depended on the duration and intensity of the rainfall event. Metal concentrations were within the permissible limits specified in the Korea drinking water standard. In addition, counts of coliform, E. coli and heterotrophic bacteria were higher in the first flush 5 min after the start of the rainfall event. Principal component analysis and correlation analysis through 40 events in 2009 showed that the quality of stored rainwater depends on the conditions of the catchment and storage tank and the antecedent dry period.

Adjuvant laboratory marker of Kawasaki disease; NT-pro-BNP or hs-CRP?

BACKGROUND

The diagnosis of Kawasaki disease (KD) is based on clinical data and non-pathognomonic symptoms. As no specific diagnostic test for KD exists, BNP or NT-pro-BNP might be of importance in identifying KD. We compared serum hs-CRP and NT-pro-BNP level in the acute phase of 59 KD patients and evaluated the diagnostic performance of these laboratory markers in KD to estimate the cut-off level for differentiating KD from other febrile illnesses as age-matched controls.

MATERIALS AND METHODS

The study groups consisted of 59 KD patients in the disease group and 45 other patients with febrile illnesses as age-matched controls. NT-pro-BNP was measured using Elecsys proBNP (Roche Diagnostics, Mannheim, Germany), and hs-CRP was tested with CardioPhase hs-CRP (Siemens Healthcare Diagnostics, Marburg, Germany).

RESULTS

NT-pro-BNP levels were significantly higher in the KD patients than in the controls (P < 0.001). In the ROC curve analysis, the sensitivity was 66.10%, and the specificity was 77.08% at 235.2 pg/mL. hs-CRP levels tended to be higher in KD patients compared to controls.

DISCUSSION

This study indicates that NT-pro-BNP might be a more useful laboratory marker as an adjuvant diagnostic tool for KD than hs-CRP. Especially in a patient with incomplete clinical features of KD, the diagnosis and the start of treatment were delayed to confirm a fever persisting for at least 5 days. Therefore, we expect that NT-pro- BNP would be especially useful for KD patients with these atypical clinical presentations.

Rainwater harvesting potentials for drought mitigation in Iran

In order to evaluate the potential of rainwater harvesting (RWH) for mitigating water scarcity in a semi-arid zone of the country (Mashhad-Iran), three typical RWH systems were installed and monitored. The first system consists of 5,000 m² natural ground catchment which was leveled and covered with plastic sheets allowing for maximum possible runoff generation. Surface runoff was conducted into a 500 m³ ground reservoir via a series of draining ditches and an end collection channel. The water collected from a plastic covered catchment was used for irrigation of dryland wheat cultivation. According to the result of two years measurements, grain yield was almost doubled in irrigated plots when compared to conventional rainfed cultivation. In the second RWH system, runoff generated from about 2 ha asphaltic road and parking was diverted into a 1,200 m³ ground reservoir. The results of 2 years measurement for reservoir inflow and outflow indicated that runoff generated during rainy season was sufficient to produce necessary water for irrigating 900 planted fruit trees during successive dry seasons. The last experiment reported here is about a 40 m² roof area which was connected to a plastic tank for runoff measurement. The conclusion was that the proposed RWH system can produce enough water for building's toilets' flashes and other sanitary purposes so that the potable water could be saved considerably. In general, the results of three rainwater harvesting experiments showed the importance of using rainwater for compensating the effect of water shortages which is repeatedly occurring due to the effect of current climate change and ever increasing water utilization for drinking and food production.

Relationship between land use and water quality in a small watershed in South Korea

Recent research and monitoring undertaken by various institutions have emphasized measurements of river-water quality. Based on the results, government agencies have set guidelines to improve river-water quality management. However, the relationship between water quality and land use/land cover (LULC) has not been examined closely in South Korea to date. This study investigated this relationship in the Imgok River watershed. For this study, the relationship between water quality parameters, e.g. metallic ions, biological oxygen demand and chemical oxygen demand (BOD and COD), NH₃, NO₃ and PO₄ levels and land-use types (abandoned mine land, forest/grassland, agricultural, livestock and residential areas) was examined by correlation analysis with significant level (p<0.05) and principal component analysis (PCA). Applying PCA to water quality parameters according to land-use coverage, the principal component impacting river water quality were found to be the pH, metallic ions, BOD, PO₄, COD and total suspended solids (TSS) for abandoned mine land (AML) coverage; BOD, NO₃ and PO₄ for forest/grassland areas; TSS, NO₃, and PO₄ for agricultural land; BOD, COD, NH₃ and NO₃ for livestock coverage; and BOD, COD, NH₃ and PO₄ for residential areas. For the AML, the pH exhibited a significant negative correlation with other water quality parameters at the significant level (p<0.05). Grassland showed significant positive correlations of BOD with values of 0.837 NO₃ and 0.514 PO₄. In agricultural land, TSS had a significant negative correlation with value of -0.772 PO₄. For livestock coverage, BOD had significant positive correlations with values of 0.865 COD, 0.629 NH₃, 0.709 NO₃ and 0.472 TSS. In residential areas, COD was significantly positively correlated with values of 0.988 BOD and 0.856 PO₄, and TSS was highly positively correlated with value of 0.810 NO₃ but highly negatively correlated with value of -0.702 PO₄. Based on the above, LULC is a significant factor to influence on river water quality and this relationship should be based on the management plan for river water quality control. Future work will be conducted to take more samples in the entire river and season, to run water quality model and to choose a new method for better analysis and more accurate relationship between land-use and water quality.

Roof-harvested rainwater for potable purposes: application of solar collector disinfection (SOCO-DIS)

The efficiency of solar disinfection (SODIS), recommended by the World Health Organization, has been determined for rainwater disinfection, and potential benefits and limitations discussed. The limitations of SODIS have now been overcome by the use of solar collector disinfection (SOCO-DIS), for potential use of rainwater as a small-scale potable water supply, especially in developing countries. Rainwater samples collected from the underground storage tanks of a rooftop rainwater harvesting (RWH) system were exposed to different conditions of sunlight radiation in 2-L polyethylene terephthalate bottles in a solar collector with rectangular base and reflective open wings. Total and fecal coliforms were used, together with Escherichia coli and heterotrophic plate counts, as basic microbial and indicator organisms of water quality for disinfection efficiency evaluation. In the SOCO-DIS system, disinfection improved by 20-30% compared with the SODIS system, and rainwater was fully disinfected even under moderate weather conditions, due to the effects of concentrated sunlight radiation and the synergistic effects of thermal and optical inactivation. The SOCO-DIS system was optimized based on the collector configuration and the reflective base: an inclined position led to an increased disinfection efficiency of 10-15%. Microbial inactivation increased by 10-20% simply by reducing the initial pH value of the rainwater to 5. High turbidities also affected the SOCO-DIS system; the disinfection efficiency decreased by 10-15%, which indicated that rainwater needed to be filtered before treatment. The problem of microbial regrowth was significantly reduced in the SOCO-DIS system compared with the SODIS system because of residual sunlight effects. Only total coliform regrowth was detected at higher turbidities. The SOCO-DIS system was ineffective only under poor weather conditions, when longer exposure times or other practical means of reducing the pH were required for the treatment of stored rainwater for potable purposes.

Infrared spectroscopy of Landau levels of graphene

We report infrared studies of the Landau level (LL) transitions in single layer graphene. Our specimens are density tunable and show in situ half-integer quantum Hall plateaus. Infrared transmission is measured in magnetic fields up to B=18 T at selected LL fillings. Resonances between hole LLs and electron LLs, as well as resonances between hole and electron LLs, are resolved. Their transition energies are proportional to sqrt[B], and the deduced band velocity is (-)c approximately equal to 1.1 x 10(6) m/s. The lack of precise scaling between different LL transitions indicates considerable contributions of many-particle effects to the infrared transition energies.

Particle behaviour consideration to maximize the settling capacity of rainwater storage tanks

Design of a rainwater storage tank is mostly based on the mass balance of rainwater with respect to the tank, considering aspects such as rainfall runoff, water usage and overflow. So far, however, little information is available on the quality aspects of the stored rainwater, such as the behavior of particles, the effect of retention time of the water in the tank and possible influences of system configuration on water quality in the storage tank. In this study, we showed that the performance of rainwater storage tanks could be maximized by recognizing the importance of water quality improvement by sedimentation and the importance of the system configuration within the tank, as well as the efficient collection of runoff. The efficiency of removal of the particles was increased by there being a considerable distance between the inlet and the outlet in the rainwater storage tank. Furthermore, it is recommended that the effective water depth in a rainwater tank be designed to be more than 3 m and that the rainwater be drawn from as close to the water surface as possible by using a floating suction device. An operation method that increases the retention time by stopping rainwater supply when the turbidity of rainwater runoff is high will ensure low turbidity in the rainwater collected from the tank.

Application of the flotation process to thicken the sludge from a DAF plant

Dissolved air flotation (DAF) was evaluated for thickening of the sludges from a water treatment plant which uses DAF. Solid flux theory for gravity thickening was applied to the solid flux of DAF sludge. The higher the polymer dosage, at fixed solid concentration, the greater the rising velocity becomes. When applied with solid flux equations, a similar relationship to that of gravity thickening has been found. However, the values were much higher than in gravity thickening, because both the inflow solid concentration and the floating velocity were higher than for settled sludge. With this result, the proper dosage of polymer could be derived from the relationship between total solid flux and withdrawal velocity of DAF sludge.

Effects of surface charge, micro-bubble size and particle size on removal efficiency of electro-flotation

Flotation is a water treatment alternative to sedimentation, and uses small bubbles to remove low-density particles from potable water and wastewater. The effect of zeta potential, bubble size and particle size on removal efficiency of the electro-flotation process was investigated because previous model-simulations indicated that these attributes are critical for high collision efficiency between micro-bubbles and particles. Solutions containing Al3+ as the metal ion were subjected to various conditions. The zeta potentials of bubbles and particles were similar under identical conditions, and their charges were influenced by metal ion concentration and pH. Maximum removal efficiency was 98 and 12% in the presence and absence of flocculation, respectively. Removal efficiency was higher when particle size was similar to bubble size. These results agree with modelling simulations and indicate that collision efficiency is greater when the zeta potential of one is negative and that of the other is positive and when their sizes are similar.

Inhibition of Shc/Grb2 protein-protein interaction suppresses growth of B104-1-1 tumors xenografted in nude mice

Actinomycin D was revealed as an inhibitor of Shc/Grb2 interaction in cell lines from our recent study. Shc and Grb2 proteins are important molecules in Ras signaling pathways leading to cellular differentiation and proliferation, which require dramatic morphological changes. It was detected by transmission electron microscopy that actinomycin D induced significant changes in cellular ultrastructures of B104-1-1 cells and confirmed that the changes were due to inhibition of Shc/Grb2 interaction by actinomycin D rather than its inhibitory effect on transcription. Because actinomycin D was dispersed mainly in cytoplasm and Shc peptide (synthetic 13 amino acid tyrosine phosphorylated polypeptide) successfully displaced actinomycin D binding to its cellular targets while the other polypeptide from PDGF receptor could not. We examined the effect of actinomycin D on growth of B104-1-1 tumor xenografted in nude mice. Tumor growth was inhibited in vivo after treatment with this inhibitor. Efficacy was correlated with a reduction in the levels of Shc/Grb2 binding in excised tumors. These results suggest that actinomycin D inhibited Shc/Grb2 interaction in B104-1-1 tumor xenografted in nude mice.

Dynamin II interacts with syndecan-4, a regulator of focal adhesion and stress-fiber formation

Dynamin is a large mechanochemical GTPase that has been implicated in vesicle formation in multiple cellular compartments. It is believed that dynamin interacts with a variety of cellular proteins to constrict membranes. To identify potential intracellular proteins that interact with the PH domain of dynamin II, we carried out a yeast two-hybrid screen in which the PH domain of dynamin II was used as bait. The cell surface heparan sulfate proteoglycan syndecan-4 that acts in conjunction with integrins to promote the formation of actin stress fibers and focal adhesions was isolated as a binding partner for the PH domain of dynamin II. In vitro binding assays, immunoprecipitation, and confocal microscopy analysis confirmed the association of dynamin II with syndecan-4. Most dramatic finding of our study is that the cytoplasmic distribution of dynamin II and syndecan-4 changes in fibroblasts that have been stimulated to form the focal adhesions and stress fibers with LPA. In quiescent cells, dynamin II is evenly distributed in the cytoplasm and colocalizes with syndecan-4 near the nucleus. Upon treatment with LPA to induce focal adhesions and stress-fiber formation, dynamin II becomes markedly associated with syndecan-4 at focal adhesion sites. We further established the colocalization of syndecan-4 and dynamin with paxillin and actin as marker proteins for focal adhesions and stress fibers, respectively. All of these results suggest that the interaction between dynamin II and syndecan-4 is important in mediating focal adhesion and stress-fiber formation.

Phospholipase C-gamma1 is a guanine nucleotide exchange factor for dynamin-1 and enhances dynamin-1-dependent epidermal growth factor receptor endocytosis

Phospholipase C-gamma1 (PLC-gamma1), which interacts with a variety of signaling molecules through its two Src homology (SH) 2 domains and a single SH3 domain has been implicated in the regulation of many cellular functions. We demonstrate that PLC-gamma1 acts as a guanine nucleotide exchange factor (GEF) of dynamin-1, a 100 kDa GTPase protein, which is involved in clathrin-mediated endocytosis of epidermal growth factor (EGF) receptor. Overexpression of PLC-gamma1 increases endocytosis of the EGF receptor by increasing guanine nucleotide exchange activity of dynamin-1. The GEF activity of PLC-gamma1 is mediated by the direct interaction of its SH3 domain with dynamin-1. EGF-dependent activation of ERK and serum response element (SRE) are both up-regulated in PC12 cells stably overexpressing PLC-gamma1, but knockdown of PLC-gamma1 by siRNA significantly reduces ERK activation. These results establish a new role for PLC-gamma1 in the regulation of endocytosis and suggest that endocytosis of activated EGF receptors may mediate PLC-gamma1-dependent proliferation.

Fundamental characteristics of bubbles and ramifications for the flotation process

Flotation processes involve the use of very small bubbles (micro-bubbles) to separate particles from water. The process has become a good alternative to sedimentation, especially where the particles are small or of low density. Although the flotation process commences with a collision between particles and bubbles, most research has been focused only on the characteristics of the particles. In this paper, recent theoretical and experimental research on the characteristics of bubbles is summarized. The effect on the collision efficiency of the size and charge of bubbles is calculated through trajectory analysis. The size and charge of bubbles are measured under different conditions and the ramifications of the results are discussed. The results may lead to a better understanding and optimization of the existing process. In particular, we discuss an idea that a new advanced flotation process might be possible by the modification of the characteristics of the bubble alone or of both bubble and particle.

The effect of divalent metal ions on the zeta potential of bubbles

Micro-bubbles are used in electro-flotation (EF) and dissolved air flotation (DAF) for particle separation. The efficiency of these flotation processes depends on the collision of bubble and particle and the collision efficiency is affected by certain parameters with respect to the size and zeta potential of bubble and particle. Therefore, it is necessary to monitor not only the zeta potential of the particle, but also that of the bubble. Gas bubbles are reported to be generally negatively charged in water. In this paper, we report a study performed to measure the zeta potential of bubbles in solutions containing divalent metals and find factors which can produce positively charged bubbles. Calcium and magnesium ions were selected as divalent metal ions because natural water normally contains an appreciable quantity of them. It was found that bubbles are negatively charged in CaCl2 solutions whereas, under certain conditions, they become positively charged in MgCl2. Charge reversal of bubbles was observed above 10(-2) M Mg, especially above pH 9. A probable principle that explained the charge reversal could be a combined mechanism with both specific adsorption of hydroxylated species and formation of hydroxide precipitates. Creating solution conditions that can produce positively charged bubbles in flotation methods might make it possible to remove particles using lesser amounts of coagulant or even none at all.

Antitumor effect of the cinnamaldehyde derivative CB403 through the arrest of cell cycle progression in the G2/M phase

Cinnamaldehydes have been shown to have inhibitory effects on farnesyl protein transferase (FPTase; EC 2.5.1.29) in vitro, angiogenesis, cell-cell adhesion, and tumor cell growth and to be immunomodulators. However, the mechanisms responsible for these effects remain unknown. To elucidate the molecular mechanism of the cinnamaldehyde derivative CB403 for growth inhibition, CB403 was synthesized from 2'-hydroxycinnamaldehyde. CB403-treated cells were weakly adherent to the culture dishes. In addition, CB403 inhibited tumor growth in these cells in a concentration-dependent manner. FACS analysis using human cancer cells treated with this compound showed cell cycle arrest in mitosis, which was correlated with a marked increase in the amount of cyclin B1. Furthermore, CB403 blocked in vivo growth of human colon and breast tumor xenografts without loss of body weight in nude mice. These results support the hypothesis that the cinnamaldehyde derivative CB403 exerts cytostatic properties by inducing mitotic arrest in cancer cells.

Biological effects of G1 phase arrest compound, sesquicillin, in human breast cancer cell lines

Sesquicillin, isolated from fungal fermentation broth, strongly induced G1 phase arrest in human breast cancer cells. During G1 phase arrest, the expression level of cyclin D1, cyclin A, and cyclin E was decreased, and the expression of CDK (cyclin-dependent-kinase) inhibitor, protein p21(Waf1/Cip1), was increased in a time-dependent manner in a breast cancer cell MCF-7. Interestingly, the G1 phase arrest induced by sesquicillin also occurred independently of the tumor suppressor protein, p53. Sesquicillin inhibits the proliferation of MCF-7 via G1 phase arrest in association with the induction of CDK inhibitor protein, p21(Waf1/Cip1), and the reduction of G1 phase related-cyclin proteins.

Negative regulatory role of overexpression of PLC gamma 1 in the expression of early growth response 1 gene in rat 3Y1 fibroblasts

The early growth response 1 (Egr-1) gene product is a transcription factor that functions as an oikis factor. Loss of Egr-1 expression is closely associated with tumor formation. Phospholipase Cgamma1 (PLCgamma1) is overexpressed in some tumors, and its overexpression causes anchorage-independent growth. Here we report that overexpression of PLCgamma1 and SH2-SH3 domain of PLCgamma1 decreased induction of Egr-1 and the Egr-1-regulated genes TSP-1 and PAI-1. Results from the nuclear run-on assay and transfection experiment with the proximal 455 base pair region of the Egr-1 promoter (-454 to +1) showed that Egr-1 transcriptional activity was suppressed in PLCgamma1-3Y1 cells whereas decay of Egr-1 mRNA was similar in both cell lines. Serum response element- and ternary complex factor Elk-1-mediated transcriptional activation of the reporter gene in response to EGF were also inhibited in PLCgamma1-3Y1 cells. Pretreatment with the protein synthesis inhibitor cycloheximide (CHX) partially abrogated the serum-induced suppression of Egr-1 transcription in PLCgamma1-3Y1 cells, suggesting that a CHX-sensitive factor(s) is involved in the suppression of Egr-1 transcription in PLCgamma1-3Y1 cells. Our results demonstrated that overexpression of PLCgamma1 functions as a negative modulator of the tumor suppressor Egr-1 gene expression, possibly through inhibition of Elk-1-dependent transcriptional activity.

Activation of dynamin I gene expression by Sp1 and Sp3 is required for neuronal differentiation of N1E-115 cells

Dynamin I is a key molecule required for the recycling of synaptic vesicles in neurons, and it has been known that dynamin I gene expression is induced during neuronal differentiation. Our previous studies established that neuronal restriction of dynamin I gene expression is controlled by Sp1 and nuclear factor-kappaB-like element-1. Here, using a series of deletion constructs and site-directed mutation, we found that transcription of dynamin I gene during neuronal differentiation of N1E-115 cells is controlled primarily by the Sp1 element located between -13 to -4 bp of the dynamin I promoter. Gel shift analysis demonstrated that in addition to Sp1, Sp3 could interact with this Sp1 element. The requirement for Sp family transcription factors in dynamin I gene expression was confirmed by using mithramycin, an inhibitor of Sp1/Sp3 binding. Mithramycin repressed dynamin I gene expression and resulted in blocking of neuronal differentiation of N1E-115 cells. The localization of the dynamin I protein was also restricted in the peripheral region of the nucleus by the mithramycin treatment. Thus, all of our results suggest that induction of dynamin I gene expression during N1E-115 cell differentiation is modulated by Sp1/Sp3 interactions with the dynamin I promoter, and its expression is important for neuronal differentiation of the N1E-115 cells.