Selection of aptamers against live bacterial cells

Whole-cell aptamer-based techniques for rapid bacterial detection: Alternatives to traditional methods

Controlling the spread of bacterial infectious diseases is a major public health issue, particularly in view of the pandemic of bacterial resistance to antibiotics. In this context, the detection and identification of pathogenic bacteria is a prerequisite for the implementation of control measures. Current reference methods are mainly based on culture methods, which generate a delay in obtaining a result and requires equipment. Consequently, focusing on the detection of the whole bacterium represents a very attractive alternative, since no culture is required. Several techniques have already been deployed to identify whole-cell bacteria. In recent decades, growing interest in nucleic acid aptamers has emerged as a viable alternative to antibodies as recognition elements, offering preferable stability, cost-efficiency, good specificity and affinity. This review explores current alternative methods for the detection of whole-cell bacteria, with particular emphasis on aptamer-based assays. These assays have shown promising results in various transduction mechanisms, including optical, electrochemical, and mechanical approaches, enhancing their versatility in different diagnostic platforms. The integration of aptamers in these detection methods offers rapid, sensitive, versatile and portable solutions for pathogen identification, positioning them as valuable tools in the fight against bacterial infections.

Novel antibody- and aptamer-based approaches for sensitive detection of mycotoxin fusaric acid in cereal

This study presents the first successful generation of polyclonal antibodies (pAbs) and oligonucleotide aptamers specifically targeting fusaric acid (FA). Utilizing these pAbs and aptamers, three highly sensitive and specific assays were developed for the detection of FA in cereals with limits of detection (LOD) ranging from 5 to 50 ng/g: an antibody-based enzyme-linked immunosorbent assay (ELISA), an aptamer-based enzyme-linked aptamer-sorbent assay (ELASA), and a hybrid enzyme-linked aptamer-antibody sandwich assay (ELAAA). The recovery rates of FA in spiked cereal samples ranged from 87 % to 112 % across all assays. Analysis of 15 cereal feed samples revealed FA contamination levels of 459 to 1743 ng/g (ELISA), 427 to 1960 ng/g (ELASA), and 381 to 1987 ng/g (ELAAA). These results were further validated by HPLC analysis, confirming high consistency within developed assays. Overall, the ELISA, ELASA, and ELAAA are promising tools for the rapid detection of FA, significantly contributing to food safety monitoring.

Advances in aptamer-based biosensors for monitoring foodborne pathogens

Biosensors are analytical devices for detecting a wide range of targets, including cells, proteins, DNA, enzymes, and chemical and biological compounds. They mostly rely on using bioprobes with a high binding affinity to the target for specific detection. However, low specificity and effectiveness of the conventional biosensors has led to the search for novel materials, that can specifically detect biomolecules. Aptamers are a group of single-stranded DNA or RNA oligonucleotides, that can bind to their targets with high specificity and serve as effective bioprobes for developing aptamer-based biosensors. Aptamers have a shorter production time, high stability, compared to traditional bioprobes, and possess ability to develop them for specific target molecules for tailored applications. Thus, various aptasensing approaches, including electrochemical, optical, surface plasmon resonance and chip-dependent approaches, have been investigated in recent times for various biological targets, including foodborne pathogens. Hence, this article is an overview of various conventional foodborne pathogen detection methods, their limitations and the ability of aptamer-based biosensors to overcome those limitations and replace them. In addition, the current status and advances in aptamer-based biosensors for the detection of foodborne pathogens to ensure food safety were also discussed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05889-8.

The Application of Aptamer and Research Progress in Liver Disease

Aptamers, as a kind of small-molecule nucleic acid, have attracted much attention since their discovery. Compared with biological reagents such as antibodies, aptamers have the advantages of small molecular weight, low immunogenicity, low cost, and easy modification. At present, aptamers are mainly used in disease biomarker discovery, disease diagnosis, treatment, and targeted drug delivery vectors. In the process of screening and optimizing aptamers, it is found that there are still many problems need to be solved such as the design of the library, optimization of screening conditions, the truncation of screened aptamer, and the stability and toxicity of the aptamer. In recent years, the incidence of liver-related diseases is increasing year by year and the treatment measures are relatively lacking, which has attracted the people's attention in the application of aptamers in liver diseases. This article mainly summarizes the research status of aptamers in disease diagnosis and treatment, especially focusing on the application of aptamers in liver diseases, showing the crucial significance of aptamers in the diagnosis and treatment of liver diseases, and the use of Discovery Studio software to find the binding target and sequence of aptamers, and explore their possible interaction sites.

Novel enzyme-linked aptamer-antibody sandwich assay and hybrid lateral flow strip for SARS-CoV-2 detection

We have successfully generated oligonucleotide aptamers (Apts) and monoclonal antibodies (mAbs) targeting the recombinant nucleocapsid (N) protein of SARS-CoV-2. Apts were obtained through seven rounds of systematic evolution of ligands by exponential enrichment (SELEX), while mAbs were derived from the 6F6E11 hybridoma cell line. Leveraging these Apts and mAbs, we have successfully devised two innovative and remarkably sensitive detection techniques for the rapid identification of SARS-CoV-2 N protein in nasopharyngeal samples: the enzyme-linked aptamer-antibody sandwich assay (ELAAA) and the hybrid lateral flow strip (hybrid-LFS). ELAAA exhibited an impressive detection limit of 0.1 ng/mL, while hybrid-LFS offered a detection range of 0.1 - 0.5 ng/mL. In the evaluation using ten nasopharyngeal samples spiked with known N protein concentrations, ELAAA demonstrated an average recovery rate of 92%. Additionally, during the assessment of five nasopharyngeal samples from infected individuals and ten samples from healthy volunteers, hybrid-LFS displayed excellent sensitivity and specificity. Our study introduces a novel and efficient on-site approach for SARS-CoV-2 detection in nasopharyngeal samples. The reliable hybrid Apt-mAb strategy not only advances virus diagnostic methods but also holds promise in combating the spread of related diseases.

Selection of optimised ligands by fluorescence-activated bead sorting

The chemistry of aptamers is largely limited to natural nucleotides, and although modifications of nucleic acids can enhance target aptamer affinity, there has not yet been a technology for selecting the right modifications in the right locations out of the vast number of possibilities, because enzymatic amplification does not transmit sequence-specific modification information. Here we show the first method for the selection of specific nucleoside modifications that increase aptamer binding efficacy, using the oncoprotein EGFR as a model target. Using fluorescence-activated bead sorting (FABS), we have successfully selected optimized aptamers from a library of >65 000 variations. Hits were identified by tandem mass spectrometry and validated by using an EGFR binding assay and computational docking studies. Our results provide proof of concept for this novel strategy for the selection of chemically optimised aptamers and offer a new method for rapidly synthesising and screening large aptamer libraries to accelerate diagnostic and drug discovery.

RNA Capture-SELEX on Streptavidin Magnetic Beads

SELEX has enabled the selection of aptamers, nucleic acids that can bind a defined ligand, in some cases with exceptionally high affinity and specificity. The SELEX protocol has been adapted many times to fit a variety of needs. This protocol describes such an adaptation, namely, RNA-Capture SELEX that we have used to successfully develop small molecule-binding RNA aptamers. Our proposed method specifically selects not only for excellent binding but also for conformational switching. In consequence, we found this SELEX method to be particularly suitable for identifying aptamers for further application in synthetic riboswitch engineering.

Boronate Affinity-Amplified Electrochemical Aptasensing of Lipopolysaccharide

As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (∼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.

Selection, truncation and fluorescence polarization based aptasensor for Weissella viridescens detection

Weissella viridescens is a spoilage bacterium commonly found in low-temperature meat products. In this work, after fifteen rounds including three counter selection rounds of whole-cell systemic evolution of ligands by exponential enrichment (SELEX) in vitro, a novel aptamer L3 that can specifically recognize W. viridescens was obtained with a dissociation constant (K_d) value of 68.25 ± 5.32 nM. The sequence of aptamer L3 was optimized by truncation and a new aptamer sequence TL43 was obtained with a lower K_d value of 32.11 ± 3.01 nM. Finally, a simple and rapid fluorescence polarization (FP) platform was constructed to detect W. viridescens, in which FAM-labeled complementary sequence (FAM-cDNA) was employed to generate FP signal and streptavidin was used to amplify FP signal. In the presence of target bacteria, FP value decreased owning to the dissociation of FAM-cDNA from streptavidin/biotin-TL43/FAM-cDNA complex. Under optimal conditions, the concentration of W. viridescens and FP value displayed a good linear relationship with the detection range from 10² to 10⁶ cfu/mL. Moreover, the designed detection system had a good recovery rate of 90.6%-107.7% in smoked ham samples compared with classical plate counting method, indicating the great potential of the selected and truncated aptamer in practical biosensing applications.

Aptamers for Viral Detection and Inhibition

Recent times have experienced more than ever the impact of viral infections in humans. Viral infections are known to cause diseases not only in humans but also in plants and animals. Here, we have compiled the literature review of aptamers selected and used for detection and inhibition of viral infections in all three categories: humans, animals, and plants. This review gives an in-depth introduction to aptamers, different types of aptamer selection (SELEX) methodologies, the benefits of using aptamers over commonly used antibody-based strategies, and the structural and functional mechanism of aptasensors for viral detection and therapy. The review is organized based on the different characterization and read-out tools used to detect virus-aptasensor interactions with a detailed index of existing virus-targeting aptamers. Along with addressing recent developments, we also discuss a way forward with aptamers for DNA nanotechnology-based detection and treatment of viral diseases. Overall, this review will serve as a comprehensive resource for aptamer-based strategies in viral diagnostics and treatment.

Engineering bacterial surface interactions using DNA as a programmable material

The diverse surface interactions and functions of a bacterium play an important role in cell signaling, host infection, and colony formation. To understand and synthetically control the biological functions of individual cells as well as the whole community, there is growing attention on the development of chemical and biological tools that can integrate artificial functional motifs onto the bacterial surface to replace the native interactions, enabling a variety of applications in biosynthesis, environmental protection, and human health. Among all these functional motifs, DNA emerges as a powerful tool that can precisely control bacterial interactions at the bio-interface due to its programmability and biorecognition properties. Compared with conventional chemical and genetic approaches, the sequence-specific Watson-Crick interaction enables almost unlimited programmability in DNA nanostructures, realizing one base-pair spatial control and bio-responsive properties. This highlight aims to provide an overview on this emerging research topic of DNA-engineered bacterial interactions from the aspect of synthetic chemists. We start with the introduction of native bacterial surface ligands and established synthetic approaches to install artificial ligands, including direct modification, metabolic engineering, and genetic engineering. A brief overview of DNA nanotechnology, reported DNA-bacteria conjugation chemistries, and several examples of DNA-engineered bacteria are included in this highlight. The future perspectives and challenges in this field are also discussed, including the development of dynamic bacterial surface chemistry, assembly of programmable multicellular community, and realization of bacteria-based theranostic agents and synthetic microbiota as long-term goals.

Aptasensors versus immunosensors-Which will prevail?

Since the invention of the first biosensors 70 years ago, they have turned into valuable and versatile tools for various applications, ranging from disease diagnosis to environmental monitoring. Traditionally, antibodies have been employed as the capture probes in most biosensors, owing to their innate ability to bind their target with high affinity and specificity, and are still considered as the gold standard. Yet, the resulting immunosensors often suffer from considerable limitations, which are mainly ascribed to the antibody size, conjugation chemistry, stability, and costs. Over the past decade, aptamers have emerged as promising alternative capture probes presenting some advantages over existing constraints of immunosensors, as well as new biosensing concepts. Herein, we review the employment of antibodies and aptamers as capture probes in biosensing platforms, addressing the main aspects of biosensor design and mechanism. We also aim to compare both capture probe classes from theoretical and experimental perspectives. Yet, we highlight that such comparisons are not straightforward, and these two families of capture probes should not be necessarily perceived as competing but rather as complementary. We, thus, elaborate on their combined use in hybrid biosensing schemes benefiting from the advantages of each biorecognition element.

New analytical methods using carbon-based nanomaterials for detection of Salmonella species as a major food poisoning organism in water and soil resources

Salmonella is one of the most prevalent causing agents of food- and water-borne illnesses, posing an ongoing public health threat. These food-poisoning bacteria contaminate the resources at different stages such as production, aggregation, processing, distribution, as well as marketing. According to the high incidence of salmonellosis, effective strategies for early-stage detection are required at the highest priority. Since traditional culture-dependent methods and polymerase chain reaction are labor-intensive and time-taking, identification of early and accurate detection of Salmonella in food and water samples can prevent significant health economic burden and lessen the costs. The immense potentiality of biosensors in diagnosis, such as simplicity in operation, the ability of multiplex analysis, high sensitivity, and specificity, have driven research in the evolution of nanotechnology, innovating newer biosensors. Carbon nanomaterials enhance the detection sensitivity of biosensors while obtaining low levels of detection limits due to their possibility to immobilize huge amounts of bioreceptor units at insignificant volume. Moreover, conjugation and functionalization of carbon nanomaterials with metallic nanoparticles or organic molecules enables surface functional groups. According to these remarkable properties, carbon nanomaterials are widely exploited in the development of novel biosensors. To be specific, carbon nanomaterials such as carbon nanotubes, graphene and fullerenes function as transducers in the analyte recognition process or surface immobilizers for biomolecules. Herein the potential application of carbon nanomaterials in the development of novel Salmonella biosensors platforms is reviewed comprehensively. In addition, the current problems and critical analyses of the future perspectives of Salmonella biosensors are discussed.

Efficient Method to Identify Synthetic Riboswitches Using RNA-Based Capture-SELEX Combined with In Vivo Screening

Synthetic riboswitches are a promising tool for conditional gene expression. In vitro selected aptamers used as binding domains for the design of RNA-based switches have to exhibit excellent binding affinity as well as ligand binding-induced structural changes. Selection via Capture-SELEX favors the enrichment of aptamers which exhibit both characteristics. For the Capture-SELEX, an RNA pool is used that gets immobilized onto a capture oligonucleotide by hybridization. Addition of the ligand frees the aptamers by their binding to the ligand, resulting in the release from the capture oligonucleotide through structural changes. These sequences get reverse transcribed, PCR amplified, and used for the following selection rounds. In this publication, we present a detailed protocol for Capture-SELEX, followed by screening in yeast to identify aptamers suitable for the design of synthetic riboswitches.

The systemic characterization of aptamer cocktail for bacterial detection studied by graphene oxide-based fluorescence resonance energy transfer aptasensor

Aptamers have gained significant attention as the molecular recognition element to replace antibodies in sensor development and target delivery. Nevertheless, it is noteworthy that unlike the wide application of polyvalent antibodies, existing researches on the combined use of heterologous aptamers with similar recognition affinity and specificity for target detection were sporadic. Herein, first, the wide existence of polyaptamer for bacteria was revealed through the summary of existing literature. Furthermore, based on the establishment of a sensitive aptamer cocktail/graphene oxide fluorescence resonance energy transfer polyaptasensor with a detection limit as low as 10 CFU/ml, the systemic characterization of aptamer cocktails in bacterial detection was carried out by taking E. coli, Vi. parahemolyticus, S. typhimurium, and C. sakazakii as the assay targets. It was turned out that the polyaptasensors for C. sakazakii and S. typhimurium owned prevalence in the broader concentration range of target bacteria. While the polyaptasensors for E. coli and V. parahemolyticus outperformed monoaptasensor mainly in the lower concentration of target bacteria. The linear relationships between fluorescence recovery and the concentration of bacteria were also discussed. The different characteristics of the bacterial cellular membrane, including the binding affinity and the robustness to variation, are analyzed to be the main reason for the diverse detection performance of aptasensors. The study here enhances a sensor detection strategy with super sensitivity. More importantly, this systemic study on the aptamer cocktail in reference to antibodies will advance the in-depth understanding and rational design of aptamer based biological recognition, detection, and targeting.

Characterization of DNA aptamer-protein binding using fluorescence anisotropy assays in low-volume, high-efficiency plates

Aptamers have many useful attributes including specific binding to molecular targets. After aptamers are identified, their target binding must be characterized. Fluorescence anisotropy (FA) is one technique that can be used to characterize affinity and to optimize aptamer-target interactions. Efforts to make FA assays more efficient by reducing assay volume and time from mixing to measurement may save time and resources by minimizing consumption of costly reagents. Here, we use thrombin and two thrombin-binding aptamers as a model system to show that plate-based FA experiments can be performed in volumes as low as 2 μL per well with 20 minute incubations with minimal loss in assay precision. We demonstrate that the aptamer-thrombin interaction is best modelled with the Hill equation, indicating cooperative binding. The miniaturization of this assay has implications in drug development, as well as in the efficiency of aptamer selection workflows by allowing for higher throughput aptamer analysis.

Detection of bacterial colonization by the spectral changes of surface-enhanced Raman reporters

In times of widespread multiple antibiotic resistance, the bacterial colonization of crucial medical surfaces should be detected as fast as possible. In this work, we present the non-destructive SERS method for the detection of bacterial colonization. SERS is an excellent tool for the monitoring of suitable substances in low concentrations. The SERS substrate was prepared by the aggregation of citrate-stabilized gold nanoparticles and the adsorption of the reporters (crystal violet, thiamine, and adenine). We have tested the substrate for the detection of clinically relevant S. aureus and P. aeruginosa bacteria. The SERS spectra before and after the substrate incubation revealed the degradation of the reporter by the growing bacteria. The growth of P. aeruginosa was detected using the substrates with preadsorbed crystal violet or adenine. The suitable reporter for the detection of S. aureus remains to be discovered. The selection of the reporters resistant to exposure but easily degraded by bacteria will open the way for the in situ monitoring of bacterial colonization, thus complementing the arsenal of methods in the battle against hospital infections.

Novel Detection of Nasty Bugs, Prevention Is Better than Cure

Hospital-acquired infections (HAIs) are a growing concern around the world. They contribute to increasing mortality and morbidity rates and are an economic threat. All hospital patients have the potential to contract an HAI, but those with weakened or inferior immune systems are at highest risk. Most hospital patients will contract at least one HAI, but many will contract multiple ones. Bacteria are the most common cause of HAIs and contribute to 80-90% of all HAIs, with Staphylococcus aureus, Clostridium difficile, Escherichia coli, Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella pneumoniae accounting for the majority. Each of these bacteria are highly resistant to antibiotics and can produce a protective film, known as a biofilm, to further prevent their eradication. It has been shown that by detecting and eradicating bacteria in the environment, infection rates can be reduced. The current methods for detecting bacteria are time consuming, non-specific, and prone to false negatives or false positives. Aptamer-based biosensors have demonstrated specific, time-efficient and simple detection, highlighting the likelihood that they could be used in a similar way to detect HAI-causing bacteria.

An Aptamer Linked Immobilized Sorbent Assay (ALISA) to Detect Circulatory IFN-α, an Inflammatory Protein among Tuberculosis Patients

Dysregulation of IFN-α is the basis for pathogenesis of autoimmune as well as infectious diseases. Identifying inflammatory signatures in peripheral blood of patients is an approach for monitoring active infection. Hence, estimation of type I IFNs as an inflammatory biomarker to scrutinize disease status after treatment is useful. Accordingly, an Aptamer Linked Immobilized Sorbent Assay (ALISA) for the detection of IFN-α in serum samples was developed. Sixteen aptamers were screened for their ability to bind IFN-α. Aptamer IFNα-3 exhibited specificity for IFN-α with no cross-reactivity with interferons β and γ and human serum albumin. The disassociation constant (K_d) was determined to be 3.96 ± 0.36 nM, and the limit of detection was ∼2 ng. The characterized IFNα-3 aptamer was used in ALISA to screen tuberculosis (TB) patients' sera. An elevated IFN-α level in sera derived from untreated TB patients (median = 0.31), compared to nontuberculous household contacts (median = 0.13) and healthy volunteers (median = 0.12), and further a decline in IFN-α level among treated patients (median = 0.13) were seen. The ALISA assay facilitates direct estimation of inflammatory protein(s) in circulation unlike mRNA estimation by real time PCR. Designing of aptamers similar to the IFNα-3 aptamer provides a novel approach to assess other inflammatory protein(s) in patients before, during, and after completion of treatment and would denote clinical improvement in successfully treated patients.

Development of a Novel ssDNA Sequence for a Glycated Human Serum Albumin and Construction of a Simple Aptasensor System Based on Reduced Graphene Oxide (rGO)

Diabetes is one of the top 10 global causes of death. About one in 11 global adults have diabetes. As the disease progresses, the mortality rate increases, and complications can develop. Thus, early detection and effective management of diabetes are especially important. Herein, we present a novel glycated human serum albumin (GHSA) aptamer, i.e., GABAS-01, which has high affinity and specificity. The aptamer was selected by reduced graphene oxide-based systematic evolution of ligands by exponential enrichement (rGO-based SELEX) against GHSA. After five rounds of selection through gradually harsher conditions, GABAS-01 with high affinity and specificity for the target was obtained. GABAS-01 was labeled by FAM at the 5'-end and characterized by measuring the recovery of a fluorescence signal that is the result of fluorescence quenching effect of rGO. As a result, GABAS-01 had low-nanomolar Kd values of 1.748 ± 0.227 nM and showed a low limit of detection of 16.40 μg/mL against GHSA. This result shows the potential application of GABAS-01 as an effective on-site detection probe of GHSA. In addition, these properties of GABAS-01 are expected to contribute to detection of GHSA in diagnostic fields.

Selection of Specific DNA Aptamers for Hetero-Sandwich-Based Colorimetric Determination of Campylobacter jejuni in Food

Herein, a high-affinity single-stranded DNA aptamer (59 nt) against Campylobacter jejuni, defined as CJA1, was obtained using the whole-bacterium-based systemic evolution of ligands by exponential enrichment procedure. CJA1 was analyzed with a stable secondary structure and low dissociation constant (K_d) value of 1.37 ± 0.28 nM. The potential use of CJA1 was exemplified by the construction of a hetero-sandwich platform, in which C. jejuni was bound with a biotin-tagged CJA1 to perform a colorimetric reaction that is associated with visible color changes and detectable optical responses. Dependent upon this sensing platform, C. jejuni can be detected from 1.7 × 10¹ to 1.7 × 10⁶ colony-forming units (CFU)/mL. The limit of detection (LOD) is obtained as 10 CFU/mL in PBS. The specificity study showed that the sensing platform is easy to distinguish C. jejuni from other common pathogens. Moreover, the C. jejuni-contaminated milk samples can also be accurately probed (LOD = 13 CFU/mL) without sacrificing its assay abilities, indicating the promising prospect of CJA1 in the fields of biosensing and diagnostics.

Rapid isolation of bacteria-specific aptamers with a non-SELEX-based method

Usually, isolation of bacteria-specific aptamers by SELEX is a time-consuming process due to the required repeated rounds of binding, separation, and amplification of the probes to target bacteria. Here, we show that it is possible to isolate bacteria-specific DNA aptamers omitting the repeated rounds of binding incubation, separation, and amplification that are indispensable for SELEX. The serial removal of unbound DNAs to the bacterial cells from an initial mixture of bacteria and DNA libraries through serial centrifugation, one-time separation, and further one-time amplification of DNA bound to the target bacterial cells applied in this non-SELEX-based method allows successful aptamer isolation.

A photo-regulated aptamer sensor for spatiotemporally controlled monitoring of ATP in the mitochondria of living cells

Fluorescent aptamer sensors have shown enormous potential for intracellular imaging of small molecule metabolites. Since metabolites distribute differently at different subcellular locations and their concentrations and locations fluctuate with time, methods are needed for spatiotemporally controlled monitoring of these metabolites. Built upon previous success in temporal control of aptamer-based sensors, we herein report an aptamer sensor containing a photocleavable linker and using DQAsomes to target mitochondria for spatiotemporally controlled monitoring of ATP in the mitochondria of living cells. The photocleavable modification on the DNA ATP aptamer sensor can prevent sensor activation before reaching mitochondria and the sensor can then be activated upon light irradiation. The sensor has a detection limit of 3.7 μM and high selectivity against other nucleotides, allowing detection of ATP concentration fluctuations in mitochondria induced by Ca²⁺ or oligomycin. This work represents the first successful delivery of a DNA aptamer sensor to mitochondria, providing a new platform for targeted delivery to subcellular organelles for monitoring energy producing processes, as well as mitochondrial dysfunction-related diseases in different cells.

A photo-regulated ATP sensor coupled with cationic DQAsomes is developed for spatiotemporally controlled imaging of ATP in the mitochondria of living cells.

Aptamer Affinity-Bead Mediated Capture and Displacement of Gram-Negative Bacteria Using Acoustophoresis

Here, we report a simple and effective method for capturing and displacement of gram-negative bacteria using aptamer-modified microbeads and acoustophoresis. As acoustophoresis allows for simultaneous washing and size-dependent separation in continuous flow mode, we efficiently obtained gram-negative bacteria that showed high affinity without any additional washing steps. The proposed device has a simple and efficient channel design, utilizing a long, square-shaped microchannel that shows excellent separation performance in terms of the purity, recovery, and concentration factor. Microbeads (10 µm) coated with the GN6 aptamer can specifically bind gram-negative bacteria. After incubation of bacteria culture sample with aptamer affinity bead, gram-negative bacteria-bound microbeads, and other unbound/contaminants can be separated by size with high purity and recovery. The device demonstrated excellent separation performance, with high recovery (up to 98%), high purity (up to 99%), and a high-volume rate (500 µL/min). The acoustophoretic separation performances were conducted using 5 Gram-negative bacteria and 5 Gram-positive bacteria. Thanks to GN6 aptamer’s binding affinity, aptamer affinity bead also showed binding affinity to multiple strains of gram-negative bacteria, but not to gram-positive bacteria. GN6 coated bead can capture Gram-negative bacteria but not Gram-positive bacteria. This study may present a different perspective in the field of early diagnosis in bacterial infectious diseases. In addition to detecting living bacteria or bacteria-derived biomarkers, this protocol can be extended to monitoring the contamination of water resources and may aid quick responses to bioterrorism and pathogenic bacterial infections.

Targeted imaging of breast cancer cells using two different kinds of aptamers -functionalized nanoparticles

Breast cancer which is the most commonly diagnosed cancer among women; have been known as a serious threat for health and life around the world. So development of an approach for early-stage diagnosis of breast cancer is vital. In this study, we designed a double aptamer-nanoparticle conjugates-based (DANP) complex for specific detection and visualization of MCF-7 cells using Mucin 1 (MUC 1) aptamer-conjugated gold nanoparticles (MUC1 apt - GNPs) and adenosine triphosphate (ATP) aptamer-conjugated CdTe quantum dots (ATP apt-QDs). The ATP apt-QDs was attached onto MUC1 apt - GNPs surface through Van der Waals forces and electrostatic interactions between ATP aptamer and GNPs leading to the formation of DANP complex. Atomic force microscopy asserted DANP complex formation. The imaging process was based on the recognition of MUC1 protein on the surface of MCF-7 cells by MUC1 aptamer and specific internalization of DANP complex into target cells (MCF-7). Existence of abundant amounts of ATP in lysosome led to release of ATP apt-QDs from the MUC1 apt-GNPs surface resulting in strong fluorescence emission. The flow cytometry analysis and fluorescence microscopy confirmed significant internalization of DANP complex into MCF-7 cells (target) in comparison with CHO cells (non-target). Based on the obtained results, the DANP complex possesses high potency for efficient detection and monitoring of breast cancer cells (MCF-7).

Recent Advances in Aptamer Discovery and Applications

Aptamers are short, single-stranded DNA, RNA, or synthetic XNA molecules that can be developed with high affinity and specificity to interact with any desired targets. They have been widely used in facilitating discoveries in basic research, ensuring food safety and monitoring the environment. Furthermore, aptamers play promising roles as clinical diagnostics and therapeutic agents. This review provides update on the recent advances in this rapidly progressing field of research with particular emphasis on generation of aptamers and their applications in biosensing, biotechnology and medicine. The limitations and future directions of aptamers in target specific delivery and real-time detection are also discussed.

Visualized Detection of Vibrio parahaemolyticus in Food Samples Using Dual-Functional Aptamers and Cut-Assisted Rolling Circle Amplification

A biosensor using two aptamers (Dual-Apt) and cut-assisted rolling circle amplification (CA-RCA) for rapid and visualized detection of Vibrio parahaemolyticus was established. The anchoring aptamer (A-Apt) that specifically binds to the surface of V. parahaemolyticus was applied to separate and enrich the bacterium from the food matrix with the help of streptavidin magnetic beads. While the detecting aptamer (D-Apt), binding on the different sites of the cell surface, was used as a signal reporter. CA-RCA with an enhanced amplification rate was fabricated here to amplify the D-Apt to produce the monomeric G4 sequence that catalyzes the oxidation of ABTS^2-, resulting in the coloration visible to the naked eye. Under optimal conditions, as low as 10 colony-forming units (CFU)/mL (g) of V. parahaemolyticus can be visibly detected in real food samples. Free from DNA extraction, visualized signal output and no need for expensive instruments enable Dual-Apt and CA-RCA to be a promising strategy for on-spot rapid detection.

Potential use of aptamers for diagnosis and treatment of pancreatic cancer

Pancreatic cancer (PC) is highly malignant with a low 5-year survival rate. PC currently does not have good early diagnostic markers and responses poorly to chemotherapeutic drugs. The search for better biomarkers and developing more effective chemotherapy are important ways to improve the healthcare of PC patients. Aptamers are single-stranded nucleic acids with high binding affinity and specificity to target molecules. Many aptamers against different forms of cancer including PC have been selected for both diagnostic and therapeutic use. Aptamers can work as ligands to distinguish tumour cells from normal cells. Using cells as selection targets, the obtained aptamers have been used to discover new cancer biomarkers after identification of the binding target. Aptamers have been shown to have antagonists effect on cancer cell proliferation, apoptosis, and metastasis. In addition, aptamers have been used as carriers to deliver therapeutic agents to selectively kill PC cells. This review summarises the potential use of aptamers in the diagnosis and treatment of PC.

Developing a combined strategy for monitoring the progress of aptamer selection

The development of a simple, low-cost, time-saving and universally applicable method to monitor the progression of aptamer selection is particularly challenging. Herein, a combined strategy dependent on quantitative polymerase chain reaction amplification curve (AC) and melting curve analysis (MCA) is developed to monitor the convergence of the aptamer species during selection progress. As a parallel and complementary method to affinity tests and binding analyses, the AC-MCA method can be used to achieve the DNA complexity assay when affinity is undetectable. It is independent of the target properties and SELEX methods. Therefore, it has been demonstrated as a universal monitoring tool in different SELEX methods towards different targets (small molecules, proteins, bacteria and cancer cells). The AC-MCA method will facilitate current new aptamer discovery and aptamer-based wide application.

Selection of highly specific aptamers to Vibrio parahaemolyticus using cell-SELEX powered by functionalized graphene oxide and rolling circle amplification

Cell-SELEX is a powerful tool to screen aptamers binding to living cellular organisms such as bacteria, fungi and even oncocytes. Here, we developed an advanced cell-SELEX strategy featuring functionalized graphene oxide (GO) and isothermal rolling circle amplification (RCA) to select aptamers against a prevailing foodborne pathogen, Vibrio parahaemolyticus. Polyethyleneglycol (PEG) and chitosan (CTS) were grafted onto the sheet-like GO molecules to synthesize a PC-GO material. TEM and FT-IR characterization demonstrated that the PC-GO composites were near-nanometric scale and tethered with PEG and CTS moieties, a property that significantly improved its solubility in biological buffer solutions used in cell-SELEX process. PC-GO could bind with ssDNAs with lower affinities to target cells, therefore the selection efficiency is greatly enhanced. The cell-binding aptamer candidates (CACs) were amplified by 10⁷ fold using complementary ring mediated (CRM-RCA), a created amplification method that generate single-stranded products, which could be directly used in the next round selection. As fueled by PC-GO and CRM-RCA, four highly specific aptamers with lowest K_d value of 10.3 ± 2.5 nM were obtained. Flow cytometry analysis showed that all the four aptamers exhibited more than 75% binding affinity to V. parahaemolyticus than to other foodborne bacteria (less than 18%). Simple procedure, high efficiency, and free from expensive thermal cycler (required by PCR amplification) will enable the established strategy to find its applications in aptamer selecting against fungi, stem and cancerous cells as well.

Selection and characterization, application of a DNA aptamer targeted to Streptococcus pyogenes in cooked chicken

An aptamer against Streptococcus pyogenes was selected and identified, and a fluorescent method based on the reported aptamer was established to detect S. pyogenes in the cooked chicken. Through a twelve rounds of whole-bacterium SELEX (systematic evolution of ligands by exponential enrichment) selection in vitro, a set of aptamers binding to the whole cell of S. pyogenes were generated, harvesting a low-level dissociation constant (K_d) value of 44 ± 5 nmol L^-1 of aptamer S-12. Aptamer-based quantification of S. pyogenes in the cooked chicken sample was implemented in a fluorescence resonance energy transfer-based assay by using graphene oxide, resulting in a limit of detection of 70 cfu mL^-1. The selected aptamer showed affinity and selectivity recognizing S. pyogenes; besides, more biosensors based on the selected aptamer as a molecular recognition element could be developed in the innovative determinations of S. pyogenes.

Nucleic acid aptamer-based methods for diagnosis of infections

Infectious diseases are a serious global problem, which not only take an enormous human toll but also incur tremendous economic losses. In combating infectious diseases, rapid and accurate diagnostic tests are required for pathogen identification at the point of care (POC). In this review, investigations of diagnostic strategies for infectious diseases that are based on aptamers, especially nucleic acid aptamers, oligonucleotides that have high affinities and specificities toward their targets, are described. Owing to their unique features including low cost of production, easy chemical modification, high chemical stability, reproducibility, and low levels of immunogenicity and toxicity, aptamers have been widely utilized as bio-recognition elements (bio-receptors) for the development of infection diagnostic systems. We discuss nucleic acid aptamer-based methods that have been developed for diagnosis of infections using a format that organizes discussion according to the target pathogenic analytes including toxins or proteins, whole cells and nucleic acids. Also included is, a summary of recent advances made in the sensitive detection of pathogenic bacteria utilizing the isothermal nucleic acid amplification method. Lastly, a nucleic acid aptamer-based POC system is described and future directions of studies in this area are discussed.

Whole cell-SELEX of aptamers with a tyrosine-like side chain against live bacteria

In an effort to expand the binding and recognition capabilities of aptamers, a nucleoside triphosphate modified with a phenol that mimics the side chain of tyrosine was used in the selection of DNA aptamers against live bacteria. Of multiple modified aptamers that were isolated against Escherichia coli DH5α cells, one aptamer displays high selectivity and affinity for the target cells and is greatly enriched for phenol-modified dU nucleotides (dU^y, 47.5%). When the same sequences are synthesized with TTP, no binding is observed. Taken together, these findings highlight the value of using modified nucleotide triphosphates in aptamer selections and portends success in SELEX against an array of whole cells as targets.

Preparation and characterization of an aptamer-functionalized solid-phase microextraction fiber and its application in the selective monitoring of adenosine phosphates with liquid chromatography and tandem mass spectrometry

An aptamer with adenosine triphosphate as a ligand was immobilized onto the surface of a porous-polymer-coated fiber to obtain an aptamer-functionalized porous-polymer-coated solid-phase microextraction fiber. The fiber was observed with a crosslinked and porous morphological surface structure. It shows specific selectivity to adenosine triphosphate with a selectivity coefficient of 22.1 compared to the scrambled oligonucleotide functionalized fiber, and the selectivity factors over other analogues and reference compounds were from 6.1 to 77.5. When the fiber-based solid-phase microextraction was coupled with liquid chromatography and tandem mass spectrometry, detection limits of 2.7, 29, and 34 μg/L were achieved for adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate, respectively. The spiking recoveries of 77.6-91.9% were achieved for trace adenosine phosphates in human serum sample. Furthermore, the fibers showed high stability and good reusability and could be used over 50 times for the real serum sample pretreatment without remarkable performance reduction.

Whole-bacterium SELEX of DNA aptamers for rapid detection of E.coli O157:H7 using a QCM sensor

The rapid detection of foodborne pathogens is critical to ensure food safety. The objective of this study is to select aptamers specifically bound to Escherichia coli O157:H7 using the whole-bacterium SELEX (Systematic Evolution of Ligands by Exponential Enrichment) and apply the selected aptamer to a QCM (quartz crystal microbalance) sensor for rapid and sensitive detection of target bacteria. A total of 19 rounds of selection against live E. coli O157:H7 and 6 rounds of counter selection against a mixture of Staphylococcus aureus, Listeria monocytogenes, and Salmonella Typhimurium, were performed. The aptamer pool from the last round was cloned and sequenced. One sequence S1 that appeared 16 times was characterized and a dissociation constant (K_d) of 10.30nM was obtained. Subsequently, a QCM aptasensor was developed for the rapid detection of E. coli O157:H7. The limit of detection (LOD) and the detection time of the aptasensor was determined to be 1.46×10³ CFU/ml and 50min, respectively. This study demonstrated that the ssDNA aptamer selected by the whole-bacterium SELEX possessed higher sensitivity than previous work and the potential use of the constructed QCM aptasensor in rapid screening of foodborne pathogens.

Selection and Application of Aptamers and Intramers

Aptamers are auspicious nucleic acid ligands for targeting different molecules, such as small molecules, peptides, proteins, or even whole living cells. They are short single-stranded DNA or RNA oligonucleotides, which can fold into complex three-dimensional structures and bind selectively their targets. Using the combinatorial chemistry process SELEX (Systematic Evolution of Ligands by EXponential Enrichment), target specific aptamers can be selected. These aptamers have a variety of application possibilities and can be used as sensors, diagnostic, imaging or therapeutic agents, and in the field of regenerative medicine for tissue engineering.

Aptamers as the Agent in Decontamination Assays (Apta-Decontamination Assays): From the Environment to the Potential Application In Vivo

The binding specificity and affinity of aptamers have long been harnessed as the key elements in the development of aptamer-based assays, particularly aptasensing application. One promising avenue that is currently explored based on the specificity and affinity of aptamers is the application of aptamers in the decontamination assays. Aptamers have been successfully harnessed as the decontamination agents to remove contaminants from the environment and to decontaminate infectious elements. The reversible denaturation property inherent in aptamers enables the repeated usage of aptamers, which can immensely save the cost of decontamination. Analogous to the point-of-care diagnostics, there is no doubt that aptamers can also be deployed in the point-of-care aptamer-based decontamination assay, whereby decontamination can be performed anywhere and anytime for instantaneous decision-making. It is also prophesied that aptamers can also serve more than as a decontaminant, probably as a tool to capture and kill hazardous elements, particularly pathogenic agents.

Aptasensors for quantitative detection of Salmonella Typhimurium

Salmonella is one of the most frequent causes of food borne infectious disease. Among nearly 2500 documented serotypes are reported, Salmonella Typhimurium is the number one serotype associated with salmonellosis worldwide. Many different methods have been developed for the detection and quantification of S. typhimurium. Most of these assays are usually expensive, time consuming and require difficult sample preparation steps. Therefore, it is necessary to develop rapid, robust, cost-effective and sensitive alternative detection methods. In the last years, aptasensors, used for detection of S. typhimurium in different samples. In this review, recent advances and applications of aptasensors for the detection and quantification of S. typhimurium in details have been summarized.

Identification and imaging of leukemia cells using dual-aptamer-functionalized graphene oxide complex

Acute lymphoblastic leukemia is the most common malignancy in children. Patient improvement completely depends on the diagnosis of acute lymphoblastic leukemia. So there is a great demand for diagnosis of acute lymphoblastic leukemia. In this study, a novel assay based on dual-aptamer (Sgc8c and ATP aptamers)-functionalized graphene oxide (DAFGO) complex was designed for the identification of Molt-4 cells (human acute lymphoblastic leukemia T-cell). This assay relies on the internalization of DAFGO complex into Molt-4 cells, but not into U266 cells, using Sgc8c aptamer as molecular recognition probe, and release of FAM-labeled ATP aptamer from the complex in the presence of high amounts of ATP in lysosome, leading to a strong fluorescence emission. Formation of DAFGO complex was analyzed by fluorometric analysis and gel retardation assay. The internalization of complex was monitored by flow cytometry and fluorescence microscopy in Molt-4 (target) and U266 cells (nontarget) with DAFGO complex. Our results showed that the developed complex was efficiently internalized into target cells and induced a strong fluorescence emission.

Two-Way Gold Nanoparticle Label-Free Sensing of Specific Sequence and Small Molecule Targets Using Switchable Concatemers

A two-way colorimetric biosensor based on unmodified gold nanoparticles (GNPs) and a switchable double-stranded DNA (dsDNA) concatemer have been demonstrated. Two hairpin probes (H1 and H2) were first designed that provided the fuels to assemble the dsDNA concatemers via hybridization chain reaction (HCR). A functional hairpin (FH) was rationally designed to recognize the target sequences. All the hairpins contained a single-stranded DNA (ssDNA) loop and sticky end to prevent GNPs from salt-induced aggregation. In the presence of target sequence, the capture probe blocked in the FH recognizes the target to form a duplex DNA, which causes the release of the initiator probe by FH conformational change. This process then starts the alternate-opening of H1 and H2 through HCR, and dsDNA concatemers grow from the target sequence. As a result, unmodified GNPs undergo salt-induced aggregation because the formed dsDNA concatemers are stiffer and provide less stabilization. A light purple-to-blue color variation was observed in the bulk solution, termed the light-off sensing way. Furthermore, H1 ingeniously inserted an aptamer sequence to generate dsDNA concatemers with multiple small molecule binding sites. In the presence of small molecule targets, concatemers can be disassembled into mixtures with ssDNA sticky ends. A blue-to-purple reverse color variation was observed due to the regeneration of the ssDNA, termed the light-on way. The two-way biosensor can detect both nucleic acids and small molecule targets with one sensing device. This switchable sensing element is label-free, enzyme-free, and sophisticated-instrumentation-free. The detection limits of both targets were below nanomolar.

Development of hydrogels for regenerative engineering

The aim of regenerative engineering is to restore complex tissues and biological systems through convergence in the fields of advanced biomaterials, stem cell science, and developmental biology. Hydrogels are one of the most attractive biomaterials for regenerative engineering, since they can be engineered into tissue mimetic 3D scaffolds to support cell growth due to their similarity to native extracellular matrix. Advanced nano- and micro-technologies have dramatically increased the ability to control properties and functionalities of hydrogel materials by facilitating biomimetic fabrication of more sophisticated compositions and architectures, thus extending our understanding of cell-matrix interactions at the nanoscale. With this perspective, this review discusses the most commonly used hydrogel materials and their fabrication strategies for regenerative engineering. We highlight the physical, chemical, and functional modulation of hydrogels to design and engineer biomimetic tissues based on recent achievements in nano- and micro-technologies. In addition, current hydrogel-based regenerative engineering strategies for treating multiple tissues, such as musculoskeletal, nervous and cardiac tissue, are also covered in this review. The interaction of multiple disciplines including materials science, cell biology, and chemistry, will further play an important role in the design of functional hydrogels for the regeneration of complex tissues.

Selection, Characterization and Interaction Studies of a DNA Aptamer for the Detection of Bifidobacterium bifidum

A whole-bacterium-based SELEX (Systematic Evolution of Ligands by Exponential Enrichment) procedure was adopted in this study for the selection of an ssDNA aptamer that binds to Bifidobacterium bifidum. After 12 rounds of selection targeted against B. bifidum, 30 sequences were obtained and divided into seven families according to primary sequence homology and similarity of secondary structure. Four FAM (fluorescein amidite) labeled aptamer sequences from different families were selected for further characterization by flow cytometric analysis. The results reveal that the aptamer sequence CCFM641-5 demonstrated high-affinity and specificity for B. bifidum compared with the other sequences tested, and the estimated K_d value was 10.69 ± 0.89 nM. Additionally, sequence truncation experiments of the aptamer CCFM641-5 led to the conclusion that the 5'-primer and 3'-primer binding sites were essential for aptamer-target binding. In addition, the possible component of the target B. bifidum, bound by the aptamer CCFM641-5, was identified as a membrane protein by treatment with proteinase. Furthermore, to prove the potential application of the aptamer CCFM641-5, a colorimetric bioassay of the sandwich-type structure was used to detect B. bifidum. The assay had a linear range of 10⁴ to 10⁷ cfu/mL (R² = 0.9834). Therefore, the colorimetric bioassay appears to be a promising method for the detection of B. bifidum based on the aptamer CCFM641-5.

Broadly reactive aptamers targeting bacteria belonging to different genera using a sequential toggle cell-SELEX

Conventional cell-SELEX aims to isolate aptamers to a single unique target bacteria species. We propose a method to isolate single-stranded DNA aptamers that have broad reactivity to multiple bacterial targets belonging to different genera. The key of the proposed method is that targets of interest are changed sequentially at each SELEX round. The general scheme was examined using six bacteria from different genera, Escherichia coli, Enterobacter aerogenes, Klebsiella pneumoniae, Citrobacter freundii, Bacillus subtilis, and Staphylococcus epidermidis (four gram-negative and two gram-positive bacteria). In the first round of SELEX, the DNA library was incubated with E. coli and amplicons bound to E. coli were separated. The amplicons were sequentially separated by incubation with E. aerogenes, K. pneumoniae, C. freundii, B. subtilis, and S. epidermidis at each SELEX. The amplicons obtained using the last bacterial species were incubated again with the first bacterial species and this loop was repeated two more times. We refer to this method as sequential toggle cell-SELEX (STC-SELEX). The isolated aptamers had dissociation constants of 9.22–38.5 nM and had no affinity to other bacteria that were not included in STC-SELEX. These results demonstrate the potential to isolate aptamers with broad affinity to bacterial taxa in different genera.

A simple and sensitive aptasensor for colorimetric detection of adenosine triphosphate based on unmodified gold nanoparticles

A simple and sensitive colorimetric aptasensor for rapid and facile detection of adenosine triphosphate (ATP) has been demonstrated here based on aptamer-based hairpin probes and unmodified gold nanoparticles (AuNPs). The hairpin probe is constructed by adding another five nucleotides to the 5'-end of an anti-ATP aptamer which can hybridize to nucleotides at the 3'-end of the aptamer, forming a hairpin-shaped structure. In the absence of ATP, the hairpin probes are rigid, and the AuNPs are susceptible to salt-induced aggregation. Conversely, upon binding with target ATP, the hairpin probes undergo conformational changes, forming aptamer-ATP complexes and exposing flexible ends which coat the surface of AuNPs to inhibit their aggregation in the high salt solution. Subsequently, a blue-to-red color change can be recognized by the naked eye. The aptasensor achieved selective responses toward ATP with a detection limit of 0.1μM, and exhibited high-quality detection performance in biological samples. In addition, this detection method is simple, rapid and cost-effective, holding great potential for further applications in point-of-care research.