TiO2 photocatalysis: Design and applications

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

The direct discharge of industrial wastewater into the environment results in serious contamination. Photocatalytic treatment with the application of sunlight and its enhancement by coupling with electrocatalytic degradation offers an inexpensive and green technology enabling the total removal of refractory pollutants such as surfactants, pharmaceuticals, pesticides, textile dyes, and heavy metals, from industrial wastewater. Among metal oxide—semiconductors, cerium dioxide (CeO2) is one of the photocatalysts most commonly applied in pollutant degradation. CeO2 exhibits promising photocatalytic activity. Nonetheless, the position of conduction bands (CB) and valence bands (VB) in CeO2 limits its application as an efficient photocatalyst utilizing solar energy. Its photocatalytic activity in wastewater treatment can be improved by various modification techniques, including changes in morphology, doping with metal cation dopants and non-metal dopants, coupling with other semiconductors, and combining it with carbon supporting materials. This paper presents a general overview of CeO2 application as a single or composite photocatalyst in the treatment of various pollutants. The photocatalytic characteristics of CeO2 and its composites are described. The main photocatalytic reactions with the participation of CeO2 under UV and VIS irradiation are presented. This review summarizes the existing knowledge, with a particular focus on the main experimental conditions employed in the photocatalytic and photoelectrocatalytic degradation of various pollutants with the application of CeO2 as a single and composite photocatalyst.

Synthesis of TiO2/Nanozeolite Composites for Highly Efficient Photocatalytic Oxidation of Propene in the Gas Phase

In this work, we reported the preparation of composites based on titania (TiO2) and Zeolite Socony Mobil-5 (ZSM-5) nanozeolite, following two approaches (i.e., incorporating the presynthesized zeolite in the synthesis medium of TiO2 and incorporating presynthesized TiO2 in the synthesis medium of ZSM-5). The materials synthesized were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectrometry analysis, and their photocatalytic activities were assessed in the oxidation of propene in the gas phase. It was observed that the synthesis methodology affects the final properties of the composite, which ultimately affected their photocatalytic performance in the studied application. It was found that the Nano-ZSM5/TiO2 composite was the most active among the investigated samples, which was attributed to the intimate contact between the two components of the composite, the preserved properties of the photocatalytic active phase in the final material, and the positive contribution of the nanozeolite by increasing the local concentration of propene.

Application of Discrete First-Row Transition-Metal Complexes as Photosensitisers

This Minireview summarises and critically evaluates recent advances in the utilisation of discrete first-row transition-metal (TM) complexes as photosensitisers. Whilst many compounds absorb light, TM complexes are generally more desirable for photochemical applications, as they usually exhibit strong absorption of visible light, making them ideally suited to exploiting the sun as a freely available light source. Due to their outstanding activities, precious metals, such as iridium and ruthenium, are currently still at the forefront of photochemistry research. However, they also bear disadvantages with respect to abundance, cost and toxicity. Therefore, it is desirable to move to more abundant and less expensive systems that retain good photosensitising abilities. This Minireview will focus on first-row transition-metals, specifically titanium, copper, iron, and zinc, which have become the focus of increased attention over recent years as potential replacements for noble metals as photosensitisers. Their structure - activity relationships are explored and challenges in designing the ligands and complexes are discussed.

Degradation of aliphatic halogenated contaminants in water by UVA/Cu-TiO2 and UVA/TiO2 photocatalytic processes: Structure-activity relationship and role of reactive species

This study investigated the degradation of eight aliphatic halogenated contaminants (one brominated flame retardant and seven disinfection by-products) in synthetic drinking water by the UVA/TiO₂ and UVA/Cu-TiO₂ processes. The degradation rate constants of 2,2-bis(bromomethyl)-1,3-propanediol and trichloromethane in the UVA/Cu-TiO₂ process were 10.1 and 1.29 times, respectively, higher than those in the UVA/TiO₂ process. In contrast, the degradation rate constants of dichloroacetaldehyde, monochloroacetonitrile, monobromoacetonitrile and dibromonitromethane in the UVA/Cu-TiO₂ process were 8.15, 2.33, 2.84 and 1.80 times, respectively, lower than those in the UVA/TiO₂ process. The degradation rate constants of monobromonitromethane and dichloronitromethane were comparable in the two processes. The relationships between the degradation rate constants and the structural characteristics of the selected contaminants were examined to explain the different degradation efficacies of the contaminants in the two processes. As suggested by a quantitative structure-activity relationship (QSAR) model, the UVA/TiO₂ process favored the degradation of contaminants with more polar electron-withdrawing moieties and higher degrees of chlorination. While the UVA/Cu-TiO₂ process favored the degradation of hydrophilic unsaturated contaminants with multiple bonds. The concentrations of the reactive species (e.g., HO and e^-) generated in the two photocatalytic processes were quantified using competition kinetics. The UVA/Cu-TiO₂ process generated >10 times higher concentrations of HO than the UVA/TiO₂ process, suggesting that the former process was more suitable for the degradation of contaminants that are reactive towards HO, while e^- and e^--derived superoxide radicals were non-negligible contributors to contaminant degradation in the UVA/TiO₂ process.

Pharmaceuticals and personal care products in water and wastewater: a review of treatment processes and use of photocatalyst immobilized on functionalized carbon in AOP degradation

The presence of emerging contaminants such as pharmaceutical and personal care products in many aqueous matrices have been reported. One of such matrix is streams of wastewater, including wastewater treatment plants inflows and outflows and wastewater flow by-passing wastewater treatment plants. Their persistence arises from their resistant to breakdown, hence they may remain in the environment over long time, with a potential to cause adverse effects including endocrine disruption, gene toxicity, the imposition of sex organs, antibiotic resistance and many others in some aquatic organisms exposed to arrays of residues of pharmaceutical and personal care products. Among the treatment techniques, advanced oxidation processes have been reported to be a better technique through which these PPCPs can be degraded in the WWTPs. Heterogeneous photocatalysis using various photocatalyst immobilized on solid support such as activated carbon, graphene and carbon nanotubes in AOPs have been shown to be a viable and efficient method of PPCPs degradation. This is because, the performance of most WWTPs is limited since they were not designed to degrade toxic and recalcitrant PPCPs. This review highlight the occurrence, concentration of PPCPs in wastewater and the removal efficiency of heterogeneous photocatalysis of TiO2 immobilized on solid supports.

Photocatalytic Performance Evaluation of Titanium Dioxide Nanotube-Reinforced Cement Paste

Considering the increase in research regarding environmental pollution reduction, the utilization of cementitious material, a commonly used construction material, in photocatalysts has become a desirable research field for the widespread application of photocatalytic degradation technology. Nano-reinforcement technology for cementitious materials has been extensively researched and developed. In this work, as a new and promising reinforcing agent for cementitious materials, the photocatalytic performance of titanium dioxide nanotube (TNT) was investigated. The degradation of methylene blue was used to evaluate the photocatalytic performance of the TNT-reinforced cement paste. In addition, cement paste containing micro-TiO₂ (m-TiO₂) and nano-TiO₂ (n-TiO₂) particles were used for comparison. Moreover, the effect of these TiO₂-based photocatalytic materials on the cement hydration products was monitored via X-ray diffraction (XRD) and thermogravimetric analysis (TG). The results indicated that all the TiO₂ based materials promoted the formation of hydration products. After 28 days of curing, the TNT-reinforced cement paste contained the maximum amount of hydration products (Ca(OH)₂). Furthermore, the cement paste containing TNT exhibited better photocatalytic effects than that containing n-TiO₂, but worse than that containing m-TiO₂.

Photocatalytic degradation of microcystin-LR by modified TiO2 photocatalysis: A review

Microcystin-LR (MC-LR), the most toxic and commonly encountered cyanotoxin, is produced by harmful cyanobacterial blooms and potentially threatens human and ecosystems health. Titanium dioxide (TiO₂) photocatalysis is attracting growing attention and has been considered as an efficient, environmentally friendly and promising solution to eliminate MC-LR in the aquatic ecosystems. Over recent decades, scientific efforts have been directed towards the understanding of fundamentals, modification strategies, and application potentials of TiO₂ photocatalysis in degrading MC-LR. In this article, recent reports have been reviewed and progress has been summarized in the development of heterogeneous TiO₂-based photocatalysts for MC-LR photodegradation under visible, UV, or solar light. The proposed photocatalytic principles of TiO₂ and destruction of MC-LR have been thoroughly discussed. Specifically, some main modification methods for improving the drawbacks and performance of TiO₂ nanoparticle were highlighted, including element doping, semiconductor coupling, immobilization, floatability amelioration and magnetic separation. Moreover, the performance evaluation metrics quantum yield (QY) and figure of merit (FOM) were used to compare different photocatalysts in MC-LR degradation. The best performance was seen in N-TiO₂ with QY and FOM values of 2.20E-07 molecules/photon and 1.00E-11 mol·L/(g·J·h). N-TiO₂ or N-TiO₂-based materials may be excellent options for photocatalyst design in terms of MC-LR degradation. Finally, a summary of the remaining challenges and perspectives on new tendencies in this exciting frontier and still an emerging area of research were addressed accordingly. Overall, the present review will offer a deep insight for understanding the photodegradation of MC-LR with modified TiO₂ to further inspire researchers that work in associated fields.

Simultaneous Adsorption and Photocatalysis Processes Based on Ternary TiO2–CuxS–Fly Ash Hetero-Structures

Ternary composites of TiO2–CuxS–fly ash were used in simultaneous adsorption and photocatalysis processes for the removal of organic (dye) pollutants. Composites of semiconductor (TiO2, CuxS) nanomaterials hosted within matrices of fly ash, such as film heterostructures, are promising materials for advanced wastewater treatment. The combination of adsorption and photocatalysis processes was investigated in the removal of methylene blue (MB), considered as a standard in photocatalysis. Ternary film heterostructures obtained by doctor blade technique allows overcoming the separation step of particles from treated wastewater. The comparison between the adsorption and photodegradation tests performed with TiO2–CuxS–fly ash showed that in dark conditions, the MB removal was 75% after 360 min, while in the presence of UV radiation, almost total dismissal of MB was achieved in the same treatment period. The degradation rate of MB, when H2O2 is used as an electron acceptor, could reach 90% in adsorption and 99% in simultaneous adsorption/photocatalysis processes. The adsorption isotherm was found to follow the Langmuir and Freundlich models.

Cost-Effective Production of TiO2 with 90-Fold Enhanced Photocatalytic Activity Via Facile Sequential Calcination and Ball Milling Post-Treatment Strategy

Titanium dioxide (TiO₂), the golden standard among the photocatalysts, exhibits a varying level of photocatalytic activities (PCA) amongst the synthetically prepared and commercially available products. For commercial applications, superior photoactivity and cost-effectiveness are the two main factors to be reckoned with. This study presents the development of simple, cost-effective post-treatment processes for a less costly TiO₂ to significantly enhance the PCA to the level of expensive commercial TiO₂ having demonstrated superior photoactivities. We have utilized sequential calcination and ball milling (BM) post-treatment processes on a less-costlier KA100 TiO₂ and demonstrated multi-fold (nearly 90 times) enhancement in PCA. The post-treated KA100 samples along with reference commercial samples (P25, NP400, and ST01) were well-characterized by appropriate instrumentation and evaluated for the PCA considering acetaldehyde photodegradation as the model reaction. Lattice parameters, phase composition, crystallite size, surface functionalities, titanium, and oxygen electronic environments were evaluated. Among post-treated KA100, the sample that is subjected to sequential 700 °C calcination and BM (KA7-BM) processes exhibited 90-fold PCA enhancement over pristine KA100 and the PCA-like commercial NP400 (pure anatase-based TiO₂). Based on our results, we attribute the superior PCA for KA7-BM due to the smaller crystallite size, the co-existence of mixed anatase-srilankite-rutile phases, and the consequent multiphase heterojunction formation, higher surface area, lattice disorder/strain generation, and surface oxygen environment. The present work demonstrates a feasible potential for the developed post-treatment strategy towards commercial prospects.

The effect of graphitized carbon on the adsorption and photocatalytic degradation of methylene blue over TiO2/C composites

The TiO₂/C composites with approximately 40 wt% of carbon were prepared by calcination of precursors, formed from a one-pot liquid phase reaction between Ti(SO₄)₂ and flour. All TiO₂/C composites displayed mesoporous structures with high BET surface areas (117-138 m² g^-1) and small crystal sizes of TiO₂ (8-27 nm). The contents of graphitic carbon and rutile TiO₂ increased, while the surface area and TiO₂ crystal size decreased for the TiO₂/C composite on increasing the calcination temperature from 650 to 800 °C; when calcinated at 800 °C, the anatase TiO₂ completely changed into rutile TiO₂ in the TiO₂/C composite. The TiO₂/C composite calcinated at higher temperatures exhibited better adsorptive and photocatalytic degradation performance in the removal of methylene blue (MB). For the entire rutile TiO₂/C-800 composite, the adsorption process of MB can be well described by the pseudo-second-order kinetic model and is governed by chemical adsorption with the maximum adsorption capacity value equal to about 15 mg g^-1. Under continuous illumination with a 254 nm UV lamp (15 W) for 3 h, the percentage of MB (14 mg l^-1) photocatalytic degradation on 50 mg of TiO₂/C-800 was 25.1% higher than that of the maximum adsorption removal. These results suggest that the graphitized carbon has a significant effect on the adsorptivity and photocatalytic activity of the TiO₂/C composite.

Synthesis of Double-Shell Hollow TiO2@ZIF-8 Nanoparticles With Enhanced Photocatalytic Activities

Synthesis of semiconductor-MOF heterostructure photocatalysts has attracted considerable attention for their thermal stability, controllable crystallinity, and enhanced photocatalytic activity. In this work, the hollow nanostructure of anatase TiO₂ was prepared by etching SiO₂ from core–shell SiO₂@TiO₂ nanoparticles. ZIF-8, one of the metal-organic frameworks (MOFs), was hybrid synthesized on the surface of hollow TiO₂ and formed double-shell hollow nanoparticles. The photocatalytic activity of the double-shell hollow TiO₂@ZIF-8 nanoparticles toward methylene blue (MB) under UV light irradiation was processed, and the highest photocatalytic efficiency of 99.1% was shown compared with TiO₂ and SiO₂@TiO₂ nanoparticles. This study suggests a promising approach to achieve an advanced photocatalytic performance toward dye degradation using MOFs for the surface engineering of semiconductors.

Surfactant Effects on the Synthesis of Redox Bifunctional V2O5 Photocatalysts

Novel V2O5 bifunctional photocatalysts were prepared following a wet chemical process with the addition of anionic or non-ionic surfactants into the precursor solution and further heating under reflux. Detailed characterization and investigation of the relevant light-matter interactions proved that surfactants addition had a strong impact on the morphology, while also affecting the crystallinity, the optoelectronic properties, and the surface chemistry of the novel photocatalysts. The most efficient photocatalyst (T80) was based on tween 80, a surface-active agent employed for the first time in the synthesis of vanadium oxide materials. T80 presented crystalline nature without structural defects, which are usually centers of e- - h+ recombination. This material also exhibited small crystal size, high porosity, and short migration paths for the charge carriers, enabling their effective separation during photocatalysis. Under UV light illumination, T80 was capable to reduce hexavalent chromium to trivalent up to 70% and showed high yields in degrading methylene blue azo-dye and tetracycline antibiotic water pollutants. This remarkably high bifunctional performance defines T80 as a promising and capable photocatalytic material for both advanced oxidation and reduction processes (AOPs-ARPs).

Co3O4/Bi4O5I2/Bi5O7I C-Scheme Heterojunction for Degradation of Organic Pollutants by Light-Emitting Diode Irradiation

Remediation of organic pollutant matrixes from wastewater by photodegradation using different heterojunctions is extensively studied to improve performance for potential application. Brilliant black (BB) and p-nitrophenol (PNP) have been detected in the environment and implicated as directly or indirectly carcinogenic to human health. This work analyzes their elimination from aqueous solutions under visible-light irradiation with composites of cobalt(II, III) oxide and bismuth oxyiodides (Co₃O₄/Bi₄O₅I₂/Bi₅O₇I). The synthesized nanomaterial properties were investigated using various techniques such as BET, SEM/EDS, TEM, XRD, FTIR, PL, and UV-vis. All the nanocomposites absorbed in the visible range of the solar spectrum with band gaps between 1.68 and 2.79 eV, and the specific surface area of the CB2 composite increased by 35.8% from that of Bi₄O₅I₂/Bi₅O₇I. There was an observed massive reduction in the rate of electron and hole recombination, and the band gaps of the composites decreased. The mineralization of PNP and BB was followed by determination of the total organic carbon with reductions of 93.6 and 83.7%, respectively. The main active species were the hydroxyl radicals, while the superoxide anion radical and generated holes were minor as confirmed by radical trapping experiments. The optimum pHs for degradation of PNP and BB were 9.6 and 5.3, respectively. The enhanced performance of the catalyst was due to C-scheme heterojunction formation that reduced the electron and hole recombination rate and was attributed to strong adsorption of the pollutants on the photocatalyst active surface. The nanocomposite is apposite for solar energy-driven remediation of organic pollutants from environmental aqueous samples.

Light and electric field induced unusual large-scale charge separation in hybrid semiconductor objects

Separation of electric charges is the most crucial phenomenon in natural photosynthesis, and is also extremely important for many artificial energy conversion systems based on semiconductors. The usual roadblock in this context is the fast recombination of electrons and holes. Here we demonstrate that the synergy of light and electric fields allows separating very efficiently electric charges over an unusually large distance in TiO2. The generated internal electric field can also be used to shuttle electrons simultaneously to the two opposite sides of a hybrid TiO2-polyaniline object. This counterintuitive behavior is based on the combination of the principles of bipolar electrochemistry and semi-conductor physics.

Effect of pH on the Formation of Amorphous TiO2 Complexes and TiO2 Anatase during the Pyrolysis of an Aqueous TiCl4 Solution

The titanium dioxide (TiO2) nanostructures resulted by the pyrolysis of titanium tetrachloride (TiCl4) at a low temperature of 80 °C were found to be a mixture of amorphous TiO2 complexes and anatase nanostructures, whose ratio depends on the pH of the pyrolysis medium. At a low pH level, the resulting TiO2 nanostructures are predominantly anatase and gradually shift to amorphous TiO2 complexes as the pH level increases. Moreover, the amorphous TiO2 complexes can convert back to anatase nanostructures by a post-heating treatment, and can then transform to rutile with elevating temperature. Amongst the TiO2 nanostructures recovered from the amorphous TiO2 complexes, anatase appears to be the most effective photocatalyst in the decomposition of methylene blue.

Catalytic Removal of Alizarin Red Using Chromium Manganese Oxide Nanorods: Degradation and Kinetic Studies

Dye removal through photocatalytic degradation employing nanomaterials as catalysts is a growing research area. In current studies, photocatalytic alizarin red (AR) dye degradation has been investigated by designing a series of Cr based manganese oxide nanomaterials (MH1–MH5). Synthesized nanomaterials were characterized by powder X-ray diffraction, scanning electron microscopy/energy dispersive x-ray, Brunauer–Emmett–Teller, and photoluminescence techniques and were utilized for photocatalytic AR dye degradation under UV light. AR dye degradation was monitored by UV–visible spectroscopy and percent degradation was studied for the effect of time, catalyst dose, different dye concentrations, and different pH values of dye solution. All the catalysts have shown more than 80% dye degradation exhibiting good catalytic efficiencies for dye removal. The catalytic pathway was analyzed by applying the kinetic model. A pseudo second-order model was found the best fitted kinetic model indicating a chemically-rate controlled mechanism. Values of constant R2 for all the factors studied were close to unity depicting a good correlation between experimental data.

Co-Catalytic Action of Faceted Non-Noble Metal Deposits on Titania Photocatalyst for Multielectron Oxygen Reduction

In order to clarify the reason of often reported low photocatalytic activity of rutile titania compared to that of anatase titania and the sluggish kinetics for oxygen reduction of rutile titania, in this study, faceted copper(I) oxide (Cu2O) particles (FCPs), i.e., cube, cuboctahedron and octahedron, were deposited onto rutile particles by an in-situ wet chemical method, and the co-catalytic action of FCPs was studied in the oxidative decomposition of acetic acid. The oxygen reduction reaction kinetics of bare and FCP-loaded titania samples in photodecomposition of organic compounds were investigated by light-intensity dependence measurement. FCPs serve as the specific sites (sink) which accumulate excited electrons to drive multielectron oxygen reduction reactions, as the counter reaction in photodecomposition of organic compounds by positive holes, which significantly improves the photocatalytic activity of rutile titania particles.

Photocatalytic Nanowires-Based Air Filter: Towards Reusable Protective Masks

In the last couple decades, several viral outbreaks resulting in epidemics and pandemics with thousands of human causalities have been witnessed. The current Covid-19 outbreak represents an unprecedented crisis. In stopping the virus' spread, it is fundamental to have personal protective equipment and disinfected surfaces. Here, the development of a TiO2 nanowires (TiO2NWs) based filter is reported, which it is believed will work extremely well for personal protective equipment (PPE), as well as for a new generation of air conditioners and air purifiers. Its efficiency relies on the photocatalytic generation of high levels of reactive oxygen species (ROS) upon UV illumination, and on a particularly high dielectric constant of TiO2, which is of paramount importance for enhanced wettability by the water droplets carrying the germs. The filter pore sizes can be tuned by processing TiO2NWs into filter paper. The kilogram-scale production capability of TiO2NWs gives credibility to its massive application potentials.

Comparative Analysis of Physicochemical Properties of Rutile TiO2 with Hierarchical 3D Architecture Prepared by Liquid Hydrolysis of TiCl4 and Hydrothermal Method

TiO2 (rutile) samples with a hierarchical 3D nanostructure of the particles were synthesized by two methods: liquid hydrolysis of TiCl4 at 90 °С and atmospheric pressure; hydrothermal synthesis from TiCl4 at 160 °С and different [H2O]/[Ti] ratios. The effect exerted by conditions of the synthesis and post-treatments on the crystallite size, morphology, electronic properties and pore structure of the rutile samples was investigated. It was shown that severe hydrothermal conditions with the ratio [H2O]/[Ti] = 20 provide the formation of a more perfect crystal structure of rutile with a smaller band gap energy (3.00 eV against 3.06 eV for the rutile obtained by liquid hydrolysis at atmospheric pressure). The study revealed the stabilizing effect of cerium cations on the pore structure of rutile, which changes upon thermal treatment.

Study of the photodegradation of 2-chlorobenzoic acid by TiO2 and the effects of eutrophicated water on the reaction

The photodegradation of 2-chlorobenzoic acid (2-CBA) in suspensions of TiO₂ was examined under different operational parameters. The optimal condition could be obtained through the experiment, i.e. that the concentration of 2-CBA was 30 mg/L and the dosing quantity of TiO₂ was 0.01 g under UV light in the case of pH 3.5. Above reaction process was in accordance with first order kinetics model. The influence on photocatalytic degradation caused by typical anions in eutrophicated water body such as NO₃ ^- and H₂PO₄ ^- was explored in this work, which revealed that both two anions had inhibitory effect on the degradation process. In addition, alcohol was introduced into the process to identify the degradation mechanism of 2-CBA with TiO₂, and the reaction route of 2-CBA could be predicted through the analysis on the intermediate.

Recent Progress in the Abatement of Hazardous Pollutants Using Photocatalytic TiO2-Based Building Materials

Titanium dioxide (TiO2) has been extensively investigated in interdisciplinary research (such as catalysis, energy, environment, health, etc.) owing to its attractive physico-chemical properties, abundant nature, chemical/environmental stability, low-cost manufacturing, low toxicity, etc. Over time, TiO2-incorporated building/construction materials have been utilized for mitigating potential problems related to the environment and human health issues. However, there are challenges with regards to photocatalytic efficiency improvements, lab to industrial scaling up, and commercial product production. Several innovative approaches/strategies have been evolved towards TiO2 modification with the focus of improving its photocatalytic efficiency. Taking these aspects into consideration, research has focused on the utilization of many of these advanced TiO2 materials towards the development of construction materials such as concrete, mortar, pavements, paints, etc. This topical review focuses explicitly on capturing and highlighting research advancements in the last five years (mainly) (2014-2019) on the utilization of various modified TiO2 materials for the development of practical photocatalytic building materials (PBM). We briefly summarize the prospective applications of TiO2-based building materials (cement, mortar, concretes, paints, coating, etc.) with relevance to the removal of outdoor/indoor NOx and volatile organic compounds, self-cleaning of the surfaces, etc. As a concluding remark, we outline the challenges and make recommendations for the future outlook of further investigations and developments in this prosperous area.

Silver-Decorated TiO2 Inverse Opal Structure for Visible Light-Induced Photocatalytic Degradation of Organic Pollutants and Hydrogen Evolution

TiO₂ inverse opal (TIO) structures were prepared by the conventional wet chemical method, resulting in well-formed structures for photocatalytic activity. The obtained structures were functionalized with liquid flame spray-deposited silver nanoparticles (AgNPs). The nanocomposites of TIO and AgNPs were extensively characterized by various spectroscopies such as UV, Raman, X-ray diffraction, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy combined with microscopic methods such as scanning electron microscopy, transmission electron microscopy (TEM), and high-resolution TEM. The characterization confirmed that high-quality heterostructures had been fabricated with evenly and uniformly distributed AgNPs. Fabrication of anatase TiO₂ was confirmed, and formation of AgNPs was verified with surface plasmon resonant properties. The photocatalytic activity results measured in the gas phase showed that deposition of AgNPs increases photocatalytic activity both under UVA and visible light excitation; moreover, enhanced hydrogen evolution was demonstrated under visible light.

Present applications of titanium dioxide for the photocatalytic removal of pollutants from water: A review

The evolution of modern technology and industrial processes has been accompanied by an increase in the utilization of chemicals to derive new products. Water bodies are frequently contaminated by the presence of conventional pollutants such as dyes and heavy metals, as well as microorganisms that are responsible for various diseases. A sharp rise has also been observed in the presence of new compounds heretofore excluded from the design and evaluation of wastewater treatment processes, categorized as "emerging pollutants". While some are harmless, certain emerging pollutants possess the ability to cause debilitating effects on a wide spectrum of living organisms. Photocatalytic degradation has emerged as an increasingly popular solution to the problem of water pollution due to its effectiveness and versatility. The primary objective of this study is to thoroughly scrutinize recent applications of titanium dioxide and its modified forms as photocatalytic materials in the removal and control of several classes of water pollutants as reported in literature. Different structural modifications are used to enhance the performance of the photocatalyst such as doping and formation of composites. The principles of these modifications have been scrutinized and evaluated in this review in order to present their advantages and drawbacks. The mechanisms involved in the removal of different pollutants through photocatalysis performed by TiO2 have been highlighted. The factors affecting the mechanism of photocatalysis and those affecting the performance of different TiO2-based photocatalysts have also been thoroughly discussed, thereby presenting a comprehensive view of all aspects involved in the application of TiO₂ to remediate and control water pollution.

"Tailoring the TiO2 phases through microwave-assisted hydrothermal synthesis: Comparative assessment of bactericidal activity"

Nanocrystalline titania (TiO₂) is one of the most investigated crystalline nanostructured systems in the field of materials science. The technological applications of this material are related to its optoelectronic and photocatalytic properties, which in turn are strongly dependent on the crystal phase (i.e., anatase, brookite, and rutile), particle size, and surface structure. However, systematic comparative studies of all its crystal phases are scarce in literature due to difficulties in providing a controlled synthesis, which is primarily important in obtaining the brookite phase. In this report, the synthesis of TiO₂ nanoparticles in the anatase, brookite, and rutile structures was explored, using amorphous TiO₂ as a common precursor under microwave-assisted hydrothermal conditions. The influence of parameters such as temperature, acidity, and precursor concentration on phase crystallization were investigated. The TiO₂ materials (amorphous and crystalline phases as well as commercial Degussa P25) were systematically characterized using Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, UV-visible reflectance spectroscopy, and dynamic and electrophoretic light scattering. The bactericidal activity and photocatalytic antibacterial effectiveness of each material were evaluated through the determination of the minimum inhibitory and bactericidal concentrations, and via the mortality kinetic method under ultraviolet (UV) illumination under similar conditions with two bacterial groups of unique cellular structures: Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). The results are discussed with particular emphasis on the relationship between the synthesis parameters (acidity, precursor concentration, temperature and reaction time) and the bactericidal properties.

Fabrication of ILs-Assisted AgTaO3 Nanoparticles for the Water Splitting Reaction: The Effect of ILs on Morphology and Photoactivity

The design of an active, stable and efficient photocatalyst that is able to be used for hydrogen production is of great interest nowadays. Therefore, four methods of AgTaO3 perovskite synthesis, such as hydrothermal, solvothermal, sol-gel and solid state reactions, were proposed in this study to identify the one with the highest hydrogen generation efficiency by the water splitting reaction. The comprehensive results clearly show that the solid state reaction (SSR) led to the obtainment of a sample with an almost seven times higher photocatalytic activity than the other methods. Furthermore, four ionic liquids, all possessing nitrogen in the form of organic cations (two imidazoliums with different anions, ammonium and tetrazolium), were used for the first time to prepare composites consisting of AgTaO3 modified with IL and Pt, simultaneously. The effect of the ionic liquids (ILs) and Pt nanoparticles' presence on the structure, morphology, optical properties, elemental composition and the effectiveness of the hydrogen generation was investigated and discussed. The morphology investigation revealed that the AgTaO3 photocatalysts with the application of [OMIM]-cation based ILs created smaller granules (<500 nm), whereas [TBA] [Cl] and [TPTZ] [Cl] ILs caused the formation of larger particles (up to 2 μm). We found that various ILs used for the synthesis did not improve the photocatalytic activity of the obtained samples in comparison with pristine AgTaO3. It was detected that the compound with the highest ability for hydrogen generation under UV-Vis irradiation was the AgTaO3_0.2% Pt (248.5 μmol∙g-1), having an almost 13 times higher efficiency in comparison with the non-modified pristine sample. It is evidenced that the enhanced photocatalytic activity of modified composites originated mainly from the presence of the platinum particles. The mechanism of photocatalytic H2 production under UV-Vis light irradiation in the presence of an AgTaO3_IL_Pt composite in the water splitting reaction was also proposed.