Over 12% Efficiency Nonfullerene All-Small-Molecule Organic Solar Cells with Sequentially Evolved Multilength Scale Morphologies

Optimization of the Bulk Heterojunction of All-Small-Molecule Organic Photovoltaics Using Design of Experiment and Machine Learning Approaches

All-small-molecule organic photovoltaic (OPV) cells based upon the small-molecule donor, DRCN5T, and nonfullerene acceptors, ITIC, IT-M, and IT-4F, were optimized using Design of Experiments (DOE) and machine learning (ML) approaches. This combination enables rational sampling of large parameter spaces in a sparse but mathematically deliberate fashion and promises economies of precious resources and time. This work focused upon the optimization of the core layer of the OPV device, the bulk heterojunction (BHJ). Many experimental processing parameters play critical roles in the overall efficiency of a given device and are often correlated and thus are difficult to parse individually. DOE was applied to the (i) solution concentration of the donor and acceptor ink used for spin-coating, (ii) the donor fraction, (iii) the temperature, and (iv) duration of the annealing of these films. The ML-based approach was then used to derive maps of the power conversion efficiencies (PCE) landscape for the first and second rounds of optimization to be used as guides to determine the optimal values of experimental processing parameters with respect to PCE. This work shows that with little knowledge of a potential combination of components for a given BHJ, a large parameter space can be effectively screened and investigated to rapidly determine its potential for high-efficiency OPVs.

Side-Chain Engineering of Benzodithiophene-Bridged Dimeric Porphyrin Donors for All-Small-Molecule Organic Solar Cells

Two new A-D-A small-molecule donors (C8T-BDTDP and C8ST-BDTDP) are prepared from benzodithiophene (BDT)-linked dimeric porphyrin (DP), which differ in side chains of BDT linkers with 4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene (C8T-BDT) for the former and 4,8-bis{5-[(2-ethylhexyl)thio]-2-thienyl}benzo[1,2-b:4,5-b']dithiophene (C8ST-BDT) for the latter. Both dimeric porphyrin donors show strongly UV-visible to near-infrared absorption. Compared to C8T-BDTDP, C8ST-BDTDP with an alkylthiothienyl-substituted BDT linker exhibits more intense absorption bands in the film and a lower highest occupied molecular orbital energy level. The blend film of the electron acceptor 6TIC with the respective dimeric porphyrin donor displays a broad photon response from 400 to 900 nm, unfortunately, with an absorption valley at ca. 600 nm. The device based on C8ST-BDTDP/6TIC demonstrates a promising power conversion efficiency (PCE) of 10.39% with a high short-circuit current density (J_SC) of 19.53 mA cm^-2, whereas the device based on C8T-BDTDP/6TIC shows a slightly lower PCE of 8.73% with a J_SC of 17.75 mA cm^-2. The better performance for C8ST-BDTDP/6TIC is mainly attributed to efficient charge dissociation and transportation because of the smooth surface morphology and highly ordered crystalline packing.

Diketopyrrolopyrrole (DPP)-Based Materials and Its Applications: A Review

Diketopyrrolopyrrole (DPP) and its derivatives have been widely studied in the past few years due to its intrinsic physical and chemical properties, such as strong electron-withdrawing, deep color, high charge carrier mobility, strong aggregation, good thermal-/photo-stability. In the 1970s, DPP was developed and used only in inks, paints, and plastics. Later, DPP containing materials were found to have potential other applications, typically in electronic devices, which attracted the attention of scientists. In this feature article, the synthesis pathway of DPP-based materials and their applications in organic field-effect transistors, photovoltaic devices, sensors, two photo-absorption materials, and others are reviewed, and possible future applications are discussed. The review outlines a theoretical scaffold for the development of conjugated DPP-based materials, which have multiple potential applications.

The Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications

Organic semiconductors require an energetic offset in order to photogenerate free charge carriers efficiently, owing to their inability to effectively screen charges. This is vitally important in order to achieve high power conversion efficiencies in organic solar cells. Early heterojunction-based solar cells were limited to relatively modest efficiencies (<4%) owing to limitations such as poor exciton dissociation, limited photon harvesting, and high recombination losses. The development of the bulk heterojunction (BHJ) has significantly overcome these issues, resulting in dramatic improvements in organic photovoltaic performance, now exceeding 18% power conversion efficiencies. Here, the design and engineering strategies used to develop the optimal bulk heterojunction for solar-cell, photodetector, and photocatalytic applications are discussed. Additionally, the thermodynamic driving forces in the creation and stability of the bulk heterojunction are presented, along with underlying photophysics in these blends. Finally, new opportunities to apply the knowledge accrued from BHJ solar cells to generate free charges for use in promising new applications are discussed.

High-Performance Nonfullerene Organic Photovoltaics Applicable for Both Outdoor and Indoor Environments through Directional Photon Energy Transfer

With the advent of the smart factory and the Internet of Things (IoT) sensors, organic photovoltaics (OPVs) gained attention because of their ability to provide indoor power generation as an off-grid power supply. To satisfy these applications, OPVs must be capable of power generation in both outdoor and indoor at the same time for developing environmentally independent devices. For high performances in indoor irradiation, a strategy that maximizes photon utilization is essential. In this study, graphene quantum dots (GQDs), which have unique emitting properties, are introduced into a ZnO layer for efficient photon utilization of nonfullerene-based OPVs under indoor irradiation. GQDs exhibit high absorption properties in the 350-550 nm region and strong emission properties in the visible region due to down-conversion from lattice vibration. Using these properties, GQDs provide directional photon energy transfer to the bulk-heterojunction (BHJ) layer because the optical properties overlap. Additionally, the GQD-doped ZnO layer enhances shunt resistance (R_Sh) and forms good interfacial contact with the BHJ layer that results in increased carrier dissociation and transportation. Consequently, the fabricated device based on P(Cl-Cl)(BDD = 0.2) and IT-4F introduces GQDs exhibiting a maximum power conversion efficiency (PCE) of 14.0% with a superior enhanced short circuit current density (J_SC) and fill factor (FF). Furthermore, the fabricated device exhibited high PCEs of 19.6 and 17.2% under 1000 and 200 lux indoor irradiation of light emitting diode (LED) lamps, respectively.

Synergy of Liquid-Crystalline Small-Molecule and Polymeric Donors Delivers Uncommon Morphology Evolution and 16.6% Efficiency Organic Photovoltaics

Achieving an ideal morphology is an imperative avenue for enhancing key parameters toward high-performing organic solar cells (OSCs). Among a myriad of morphological-control methods, the strategy of incorporating a third component with structural similarity and crystallinity difference to construct ternary OSCs has emerged as an effective approach to regulate morphology. A nematic liquid-crystalline benzodithiophene terthiophene rhodamine (BTR) molecule, which possesses the same alkylthio-thienyl-substituted benzo moiety but obviously stronger crystallinity compared to classical medium-bandgap polymeric donor PM6, is employed as a third component to construct ternary OSCs based on a PM6:BTR:Y6 system. The doping of BTR (5 wt%) is found to be enough to improve the OSC morphology-significantly enhancing the crystallinity of the photoactive layer while slightly reducing the donor/acceptor phase separation scale simultaneously. Rarely is such a morphology evolution reported. It positively affects the electronic properties of the device-prolongs the carrier lifetime, shortens the photocurrent decay time, facilitates exciton dissociation, charge transport, and collection, and ultimately boosts the power conversion efficiency from 15.7% to 16.6%. This result demonstrates that the successful synergy of liquid-crystalline small-molecule and polymeric donors delicately adjusts the active-layer morphology and refines device performance, which brings vibrancy to the OSC research field.

Low-Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications

With developments in materials, thin-film processing, fine-tuning of morphology, and optimization of device fabrication, the performance of organic solar cells (OSCs) has improved markedly in recent years. Designing low-bandgap materials has been a focus in order to maximize solar energy conversion. However, there are only a few successful low-bandgap donor materials developed with near-infrared (NIR) absorption that are well matched to the existing efficient acceptors. Porphyrin has shown great potential as a useful building block for constructing low-bandgap donor materials due to its large conjugated plane and strong absorption. Porphyrin-based donor materials have been shown to contribute to many record-high device efficiencies in small molecule, tandem, ternary, flexible, and OSC/perovskite hybrid solar cells. Specifically, non-fullerene small-molecule solar cells have recently shown a high power conversion efficiency of 12% using low-bandgap porphyrin. All these have validated the great potential of porphyrin derivatives as effective donor materials and made DPPEZnP-TRs a family of best low-bandgap donor materials in the OSC field so far. Here, recent progress in the rational design, morphology, dynamics, and multi-functional applications starting from 2015 will be highlighted to deepen understanding of the structure-property relationship. Finally, some future directions of porphyrin-based OSCs are presented.

Direct Correlation of Nanoscale Morphology and Device Performance to Study Photocurrent Generation in Donor-Enriched Phases of Polymer Solar Cells

The nanoscale morphology of polymer blends is a key parameter to reach high efficiency in bulk heterojunction solar cells. Thereby, research typically focusing on optimal blend morphologies while studying nonoptimized blends may give insight into blend designs that can prove more robust against morphology defects. Here, we focus on the direct correlation of morphology and device performance of thieno[3,4-b]-thiophene-alt-benzodithiophene (PTB7):[6,6]phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) bulk heterojunction (BHJ) blends processed without additives in different donor/acceptor weight ratios. We show that while blends of a 1:1.5 ratio are composed of large donor-enriched and fullerene domains beyond the exciton diffusion length, reducing the ratio below 1:0.5 leads to blends composed purely of polymer-enriched domains. Importantly, the photocurrent density in such blends can reach values between 45 and 60% of those reached for fully optimized blends using additives. We provide here direct visual evidence that fullerenes in the donor-enriched domains are not distributed homogeneously but fluctuate locally. To this end, we performed compositional nanoscale morphology analysis of the blend using spectroscopic imaging of low-energy-loss electrons using a transmission electron microscope. Charge transport measurement in combination with molecular dynamics simulations shows that the fullerene substructures inside the polymer phase generate efficient electron transport in the polymer-enriched phase. Furthermore, we show that the formation of densely packed regions of fullerene inside the polymer phase is driven by the PTB7:PC₇₁BM enthalpy of mixing. The occurrence of such a nanoscale network of fullerene clusters leads to a reduction of electron trap states and thus efficient extraction of photocurrent inside the polymer domain. Suitable tuning of the polymer-acceptor interaction can thus introduce acceptor subnetworks in polymer-enriched phases, improving the tolerance for high-efficiency BHJ toward morphological defects such as donor-enriched domains exceeding the exciton diffusion length.

Modulation of Donor Alkyl Terminal Chains with the Shifting Branching Point Leads to the Optimized Morphology and Efficient All-Small-Molecule Organic Solar Cells

Terminal group modification is one of the most influential factors for small-molecular donors compared with their polymer counterparts, resulting in an opportunity to optimize the morphology of all-small-molecule organic solar cells (ASM-OSCs). In this article, we report three novel small-molecular donors with branching points at the 1-, 2-, and 3-positions in alkyl terminal chains, called BSCl-C1, BSCl-C2, and BSCl-C3, respectively. Using IDIC-4Cl as the acceptor, the subtle branching position shift achieves a dramatic disparity in photovoltaic parameters, as indicated by the short circuit current (J_sc) changing from 4.9 to 20.1 to 14.2 mA cm^-2 and the fill factor varying from 33.9 to 71.3 to 67.0% for BSCl-C1, BSCl-C2, and BSCl-C3, respectively. The best device performance of 12.40% is obtained by the BSCl-C2:IDIC-4Cl system, which not only ranks among the top values reported to date but also exhibits low energy loss in systems that use IDIC as acceptors. The notable device performance based on BSCl-C2 is attributed to the optimized phase morphology caused by the strong molecular crystallinity and suitable intermolecular interaction with IDIC-4Cl. These results demonstrate that suitably tuning the branching position of terminal groups could promote the high performance of ASM-OSCs.

All-Small-Molecule Organic Solar Cells Based on a Fluorinated Small Molecule Donor With High Open-Circuit Voltage of 1.07 V

A new small molecule donor with an acceptor-donor-acceptor (A-D-A) structure, namely DRTB-FT, has been designed and synthesized for all-small-molecule organic solar cells (ASM-OSCs). By introducing fluorine atoms on the thienyl substituent of the central benzodithiophene unit, DRTB-FT shows a low-lying highest occupied molecular orbital (HOMO) energy level of -5.64 eV. Blending with an A-D-A type acceptor F-2Cl, DRTB-FT based ASM-OSCs gave a power conversion efficiency (PCE) of 7.66% with a high open-circuit voltage (V oc) of 1.070 V and a low energy loss of 0.47 eV. The results indicate that high V oc of ASM-OSC devices can be obtained through careful donor molecular optimization.

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Ternary strategy has been considered as an efficient method to achieve high performance polymer solar cells (PSCs). A power conversion efficiency (PCE) of 17.22% is achieved in the optimized ternary PSCs with 10 wt% MF1 in acceptors. The over 8% PCE improvement by employing ternary strategy is attributed to the simultaneously increased J_SC of 25.68 mA cm^-2, V_OC of 0.853 V and FF of 78.61% compared with Y6 based binary PSCs. The good compatibility of MF1 and Y6 can be confirmed from Raman mapping, contact angle, cyclic voltammetry and morphology, which is the prerequisite to form alloy-like state. Electron mobility in ternary active layers strongly depends on MF1 content in acceptors due to the different lowest unoccupied molecular orbital (LUMO) levels of Y6 and MF1, which can well explain the wave-like varied FF of ternary PSCs. The third-party certified PCE of 16.8% should be one of the highest values for single bulk heterojunction PSCs. This work provides sufficient references for selecting materials to achieve efficient ternary PSCs.

Barrier-Free Charge Separation Enabled by Electronic Polarization in High-Efficiency Non-fullerene Organic Solar Cells

The separation of charge-transfer states into free charges at the donor/acceptor (D/A) interfaces plays a central role in organic solar cells (OSCs). Because of strong Coulomb attraction, the separation mechanisms are elusive, particularly for the high-efficiency non-fullerene (NF) OSCs with low exciton-dissociation driving forces. Here, we demonstrate that the Coulomb barriers can be substantially overcome by electronic polarization for OSCs based on a series of A-D-A acceptors (ITIC, IT-4F, and Y6). In contrast to fullerene-based D/A heterojunctions, the polarization energies for both donor holes and acceptor electrons are remarkably increased from the interfaces to pure regions in the NF heterojunctions because of strong stabilization on electrons but destabilization on holes by electrostatic interactions in the A-D-A acceptors. In particular, upon incorporation of fluorine substituents and electron-poor cores into ITIC, the increased polarization energies can completely compensate for the Coulomb attraction in the IT-4F- and Y6-based heterojunctions, leading to barrierless charge separation.

Insights into Excitonic Dynamics of Terpolymer-Based High-Efficiency Nonfullerene Polymer Solar Cells: Enhancing the Yield of Charge Separation States

Ternary copolymerization strategy is considered an effective method to achieve high-performance photovoltaic conjugated polymers. Herein, a donor-acceptor1-donor-acceptor2-type random copolymer, named PBDTNS-TZ-BDD (T1), containing one electron-rich unit alkylthionaphthyl-flanked benzo[1,2-b/4,5-b'] di-thiophene (BDTNS) as D and two electron-deficient moieties benzo[1,2-c/4,5-c']dithiophene-4,8-dione (BDD) and fluorinated benzotriazole as A, was synthesized to investigate the excitonic dynamic effect. Also, the D-A-type alternating copolymer PBDTNS-BDD (P1) was also prepared for a clear comparison. Although the UV-Vis spectra and energy levels of P1 and T1 are similar, the power conversion efficiencies (PCEs) of the related devices are 11.50% (T1/ITIC) and 8.89% (P1/ITIC), respectively. The reason for this is systematically investigated and analyzed by theoretical calculation, photoluminescence, and pump-probe transient absorption spectroscopy. The density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculation results show that the terpolymer T1 with a lower exciton binding energy and a longer lifetime of spontaneous luminescence can synergistically increase the number of excitons reaching the donor/acceptor interface. The results of the pump-probe transient absorption spectroscopy show that the yield of charge separation of T1/ITIC is higher than that of the P1/ITIC blend film, and improved PCE could be achieved via copolymerization strategies. Moreover, the fabrication of the T1-based device is also simple without any additive or postprocessing. Therefore, it provides a promising and innovative method to design high-performance terpolymer materials.

End Group Engineering on the Side Chains of Conjugated Polymers toward Efficient Non-Fullerene Organic Solar Cells

Side chains properties of conjugated polymers, such as the length, branching point, and heteroatom, have been widely studied for application in organic solar cells (OSCs), but the end groups of side chains have been rarely reported. In this work, we systematically explored a series of new conjugated polymers with distinct side-chain end groups for high performance non-fullerene OSCs. The key components for the polymers contained functionalized units as the end groups of side chains, such as Br, alkyloxy (OMe), and alkylthienyl (T) groups. We found that the new conjugated polymers have similar absorption spectra and crystallinity with the polymer without substitution, but they showed distinct photovoltaic performance in solar cells. When the polymer without functionalized units had a power conversion efficiency (PCE) of 9.94%, the modified conjugated polymers provided high PCEs of over 13% with significantly enhanced photocurrent and fill factors. In addition, they also show additive-free and highly stable characteristics. These results demonstrate that end group engineering on side chains is a promising strategy to design new conjugated polymers toward efficient OSCs.

Developments of Diketopyrrolopyrrole-Dye-Based Organic Semiconductors for a Wide Range of Applications in Electronics

In recent times, fused aromatic diketopyrrolopyrrole (DPP)-based functional semiconductors have attracted considerable attention in the developing field of organic electronics. Over the past few years, DPP-based semiconductors have demonstrated remarkable improvements in the performance of both organic field-effect transistor (OFET) and organic photovoltaic (OPV) devices due to the favorable features of the DPP unit, such as excellent planarity and better electron-withdrawing ability. Driven by this success, DPP-based materials are now being exploited in various other electronic devices including complementary circuits, memory devices, chemical sensors, photodetectors, perovskite solar cells, organic light-emitting diodes, and more. Recent developments in the use of DPP-based materials for a wide range of electronic devices are summarized, focusing on OFET, OPV, and newly developed devices with a discussion of device performance in terms of molecular engineering. Useful guidance for the design of future DPP-based materials and the exploration of more advanced applications is provided.

Ionic Conductive Gels for Optically Manipulatable Microwave Stealth Structures

Smart structures with manipulatable properties are highly demanded in many fields. However, there is a critical challenge in the pursuit of transparent windows that allow optical waves (wavelength of µm-nm) for transmitting while blocking microwave (wavelength of cm) in terms of absorbing electromagnetic energy, specifically for meeting the frequency requirement for the 5th generation (5G) mobile networks. For fundamentally establishing novel manipulatable microwave absorbing structures, here, new polymeric aqueous gels as both optically transparent materials and microwave absorbing materials are demonstrated, in which polar networks play significant roles in attenuating electromagnetic energy. By manipulating the hydrogen bonding networks, the resulting optically transparent solid-state gels are able to offer the capabilities for absorbing microwaves. Interestingly, such gels can be switched into an optically opaque state via converting the amorphous state into a polycrystal state when the temperature is decreased. Such ionic conductive gels can endow the assembled sandwich windows with effective microwave absorbing capability in the range of 15-40 GHz, covering a branch of 5G frequency bands. The results highlight a new strategy for using ionic conductive gels to design and fabricate manipulatable microwave stealth structures for various applications.

13.7% Efficiency Small-Molecule Solar Cells Enabled by a Combination of Material and Morphology Optimization

Compared with the quick development of polymer solar cells, achieving high-efficiency small-molecule solar cells (SMSCs) remains highly challenging, as they are limited by the lack of matched materials and morphology control to a great extent. Herein, two small molecules, BSFTR and Y6, which possess broad as well as matched absorption and energy levels, are applied in SMSCs. Morphology optimization with sequential solvent vapor and thermal annealing makes their blend films show proper crystallinity, balanced and high mobilities, and favorable phase separation, which is conducive for exciton dissociation, charge transport, and extraction. These contribute to a remarkable power conversion efficiency up to 13.69% with an open-circuit voltage of 0.85 V, a high short-circuit current of 23.16 mA cm^-2 and a fill factor of 69.66%, which is the highest value among binary SMSCs ever reported. This result indicates that a combination of materials with matched photoelectric properties and subtle morphology control is the inevitable route to high-performance SMSCs.

Improved Efficiency in All-Small-Molecule Organic Solar Cells with Ternary Blend of Nonfullerene Acceptor and Chlorinated and Nonchlorinated Donors

Ternary nonfullerene all-small-molecule organic solar cells (NFSM-OSCs) were developed by incorporating a nonfullerene acceptor (IDIC) and two structurally similar small molecular donors (SM and SM-Cl), where SM-Cl is a novel small molecular donor derived from the reported molecular donor SM. When doping 10% SM-Cl in the SM:IDIC binary system, the power conversion efficiency (PCE) of the ternary solar cell was dramatically increased from 9.39 to 10.29%. Characterization studies indicated that the two donors tend to form an alloy state, which effectively down-shifted the highest occupied molecular orbital (HOMO) energy level of the donor, thus promoting a higher open-circuit voltage. Interestingly, incorporating a third component (SM-Cl) with a lower crystallinity was proven to facilitate the demixing between donors and acceptors, which was contrary to the traditional findings of enhanced phase separation through the incorporation of highly crystalline molecule. Although the morphological modulation has always been a bottleneck issue in NFSM-OSCs, the findings in this work indicated that the modulation on crystallinity deviation between donors and acceptors could be an effective method to further improve the performance of NFSM-OSCs, providing a new perspective on NFSM-OSCs.

Unraveling Correlations between Molecular Properties and Device Parameters of Organic Solar Cells Using Machine Learning

Understanding the relationships between molecular properties and device parameters is highly desired not only to improve the overall performance of an organic solar cell but also to fulfill the requirements of a device for a particular application such as solar-to-fuel energy conversion (high open-circuit voltage (V_OC)) or solar window applications (high short circuit current (J_SC)). In this work, a series of machine learning models are built for three important device characteristics (V_OC, J_SC, and fill factor) using 13 crucial molecular properties as descriptors, resulting in an impressive predictive performance (r = 0.7). These models may play a vital role in designing promising organic materials for a specific photovoltaic application with high V_OC/J_SC. The importance of descriptors for each device parameter is unraveled, which may assist in tuning them and improve understanding of the energy conversion process.

High-yielding Pd2(dba)3·C6H6-based four-fold Sonogashira coupling with selenophene-conjugated magnesium tetraethynylporphyrin for organic solar cells

A catalytic system using Pd2(dba)3·(C6H6)/PPh3/CuI for Sonogashira coupling was demonstrated to synthesize a selenophene-conjugated magnesium tetraethynylporphyrin Mg-TEP-(Se-DPP)4 (2a). The catalytic system enabled four-fold cross-coupling of the four terminal alkynes of magnesium tetraethynylporphyrin with bromoselenophene-tethered diketopyrrolopyrroles (DPPs) to produce the desired star-shaped 2a in 80% yield. This molecule shows higher solubility in organic solvents, more efficient visible and near-infrared region absorption, and a narrower band gap compared with reference thiophene-conjugated congeners. Two strategies, namely, selenium substitution and end-capping, were investigated to optimize bulk heterojunction structures in the active layers of organic solar cells. The optimized device based on 2a:PC61BM exhibited the highest PCE of 6.09% among the tested devices after solvent vapor annealing, owing to efficient exciton dissociation, balanced carrier mobility, and suppressed carrier recombination in the film's ordered morphology.

Conjugation-Curtailing of Benzodithionopyran-Cored Molecular Acceptor Enables Efficient Air-Processed Small Molecule Solar Cells

Small molecule solar cells (SMSCs) lag a long way behind polymer solar cells. A key limit is the less controllable morphology of small molecule materials, which can be aggravated when incorporating anisotropic nonfullerene acceptors. To fine-tune the blending morphology within SMSCs, a π-conjunction curtailing design is applied, which produces a efficient benzodithionopyran-cored molecular acceptor for nonfullerene SMSCs (NF-SMSCs). When blended with a molecular donor BDT3TR-SF to fabricate NF-SMSCs, the π-conjunction curtailed molecular acceptor NBDTP-M obtains an optimal power conversion efficiency (PCE) of up to 10.23%, which is much higher than that of NBDTTP-M of longer π-conjunction. It retains 93% of the PCE of devices fabricated in a glove box when all spin-coating and post-treating procedures are conducted in ambient air with relative humidity of 25%, which suggests the good air-processing capability of π-conjunction curtailed molecules. Detailed X-ray scattering investigations indicate that the BDT3TR-SF:NBDTP-M blend exhibits a blend morphology featuring fine interpenetrating networks with smaller domains and higher phase purity, which results in more efficient charge generation, more balanced charge transport, and less recombination compared to the low-performance BDT3TR-SF:NBDTTP-M blend. This work provides a guideline for molecular acceptors' design toward efficient, low-cost, air-processed NF-SMSCs.

Synthesis and Photovoltaic Effect of Electron-Withdrawing Units for Low Band Gap Conjugated Polymers Bearing Bi(thienylenevinylene) Side Chains

A novel (E)-5-(2-(5-alkylthiothiophen-2-yl)vinyl)thien-2-yl (TVT)-comprising benzo[1,2-b:4,5-b']dithiophene (BDT) derivative (BDT-TVT) was designed and synthetized to compose two donor-acceptor (D-A) typed copolymers (PBDT-TVT-ID and PBDT-TVT-DTNT) with the electron-withdrawing unit isoindigo (ID) and naphtho[1,2-c:5,6-c']bis[1,2,5]thiadiazole (NT), respectively. PBDT-TVT-ID and PBDT-TVT-DTNT showed good thermal stability (360 °C), an absorption spectrum from 300 nm to 760 nm and a relatively low lying energy level of Highest Occupied Molecular Orbital (E_HOMO) (-5.36 to -5.45 eV), which could obtain a large open-circuit voltage (V_oc) from photovoltaic devices with PBDT-TVT-ID or PBDT-TVT-DTNT. The photovoltaic devices with ITO/PFN/polymers: PC₇₁BM/MoO₃/Ag structure were assembled and exhibited a good photovoltaic performance with a power conversion efficiency (PCE) of 4.09% (PBDT-TVT-ID) and 5.44% (PBDT-TVT-DTNT), respectively. The best PCE of a PBDT-TVT-DTNT/PC₇₁BM-based device mainly originated from its wider absorption, higher hole mobility and favorable photoactive layer morphology.

Single-Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy

A new strategy of platinum(II) complexation is developed to regulate the crystallinity and molecular packing of polynitrogen heterocyclic polymers, optimize the morphology of the active blends, and improve the efficiency of the resulting nonfullerene polymer solar cells (NF-PSCs). The newly designed s-tetrazine (s-TZ)-containing copolymer of PSFTZ (4,8-bis(5-((2-butyloctyl)thio)-4-fluorothiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-alt-3,6-bis(4-octylthiophen-2-yl)-1,2,4,5-tetrazine) has a strong aggregation property, which results in serious phase separation and large domains when blending with Y6 ((2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile)), and produces a power-conversion efficiency (PCE) of 13.03%. By adding small amount of Pt(Ph)₂ (DMSO)₂ (Ph, phenyl and DMSO, dimethyl sulfoxide), platinum(II) complexation would occur between Pt(Ph)₂ (DMSO)₂ and PSFTZ. The bulky benzene ring on the platinum(II) complex increases the steric hindrance along the polymer main chain, inhibits the polymer aggregation strength, regulates the phase separation, optimizes the morphology, and thus improves the efficiency to 16.35% in the resulting devices. 16.35% is the highest efficiency for single-junction PSCs reported so far.

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Broadening the optical absorption of organic photovoltaic (OPV) materials by enhancing the intramolecular push-pull effect is a general and effective method to improve the power conversion efficiencies of OPV cells. However, in terms of the electron acceptors, the most common molecular design strategy of halogenation usually results in down-shifted molecular energy levels, thereby leading to decreased open-circuit voltages in the devices. Herein, we report a chlorinated non-fullerene acceptor, which exhibits an extended optical absorption and meanwhile displays a higher voltage than its fluorinated counterpart in the devices. This unexpected phenomenon can be ascribed to the reduced non-radiative energy loss (0.206 eV). Due to the simultaneously improved short-circuit current density and open-circuit voltage, a high efficiency of 16.5% is achieved. This study demonstrates that finely tuning the OPV materials to reduce the bandgap-voltage offset has great potential for boosting the efficiency.

Halogenation has proved an effective strategy to improve the power conversion efficiencies of organic solar cells but it usually leads to lower open-circuit voltages. Here, Cui et al. unexpectedly obtain higher open-circuit voltages and achieve a record high PCE of 16.5% by chlorination.