Core structure of the outer membrane lipoprotein from Escherichia coli at 1.9 A resolution

Label-free bacteria detection using evanescent mode of a suspended core terahertz fiber

We propose for the first time an E. coli bacteria sensor based on the evanescent field of the fundamental mode of a suspended-core terahertz fiber. The sensor is capable of E. coli detection at concentrations in the range of 10(4)-10(9) cfu/ml. The polyethylene fiber features a 150 µm core suspended by three deeply sub-wavelength bridges in the center of a 5.1 mm-diameter cladding tube. The fiber core is biofunctionalized with T4 bacteriophages which bind and eventually destroy (lyse) their bacterial target. Using environmental SEM we demonstrate that E. coli is first captured by the phages on the fiber surface. After 25 minutes, most of the bacteria is infected by phages and then destroyed with ~1 μm-size fragments remaining bound to the fiber surface. The bacteria-binding and subsequent lysis unambiguously correlate with a strong increase of the fiber absorption. This signal allows the detection and quantification of bacteria concentration. Presented bacteria detection method is label-free and it does not rely on the presence of any bacterial "fingerprint" features in the THz spectrum.

Cellular solid-state nuclear magnetic resonance spectroscopy

Decrypting the structure, function, and molecular interactions of complex molecular machines in their cellular context and at atomic resolution is of prime importance for understanding fundamental physiological processes. Nuclear magnetic resonance is a well-established imaging method that can visualize cellular entities at the micrometer scale and can be used to obtain 3D atomic structures under in vitro conditions. Here, we introduce a solid-state NMR approach that provides atomic level insights into cell-associated molecular components. By combining dedicated protein production and labeling schemes with tailored solid-state NMR pulse methods, we obtained structural information of a recombinant integral membrane protein and the major endogenous molecular components in a bacterial environment. Our approach permits studying entire cellular compartments as well as cell-associated proteins at the same time and at atomic resolution.

Outer membrane lipoprotein Lpp is Gram-negative bacterial cell surface receptor for cationic antimicrobial peptides

Antimicrobial peptides/proteins (AMPs) are important components of the host innate defense mechanisms. Here we demonstrate that the outer membrane lipoprotein, Lpp, of Enterobacteriaceae interacts with and promotes susceptibility to the bactericidal activities of AMPs. The oligomeric Lpp was specifically recognized by several cationic α-helical AMPs, including SMAP-29, CAP-18, and LL-37; AMP-mediated bactericidal activities were blocked by anti-Lpp antibody blocking. Blebbing of the outer membrane and increase in membrane permeability occurred in association with the coordinate internalization of Lpp and AMP. Interestingly, the specific binding of AMP to Lpp was resistant to divalent cations and salts, which were able to inhibit the bactericidal activities of some AMPs. Furthermore, using His-tagged Lpp as a ligand, we retrieved several characterized AMPs, including SMAP-29 and hRNase 7, from a peptide library containing crude mammalian cell lysates. Overall, this study explores a new mechanism and target of antimicrobial activity and provides a novel method for screening of antimicrobials for use against drug-resistant bacteria.

Protein diffusion in the periplasm of E. coli under osmotic stress

The physical and mechanical properties of the cell envelope of Escherichia coli are poorly understood. We use fluorescence recovery after photobleaching to measure diffusion of periplasmic green fluorescent protein and probe the fluidity of the periplasm as a function of external osmotic conditions. For cells adapted to growth in complete medium at 0.14-1.02 Osm, the mean diffusion coefficient <D(peri)> increases from 3.4 μm² s⁻¹ to 6.6 μm² s⁻¹ and the distribution of D(peri) broadens as growth osmolality increases. This is consistent with a net gain of water by the periplasm, decreasing its biopolymer volume fraction. This supports a model in which the turgor pressure drops primarily across the thin peptidoglycan layer while the cell actively maintains osmotic balance between periplasm and cytoplasm, thus avoiding a substantial pressure differential across the cytoplasmic membrane. After sudden hyperosmotic shock (plasmolysis), the cytoplasm loses water as the periplasm gains water. Accordingly, <D(peri)> increases threefold. The fluorescence recovery after photobleaching is complete and homogeneous in all cases, but in minimal medium, the periplasm is evidently thicker at the cell tips. For the relevant geometries, Brownian dynamics simulations in model cytoplasmic and periplasmic volumes provide analytical formulae for extraction of accurate diffusion coefficients from readily measurable quantities.

The double life of a bacterial lipoprotein

It has been known for many years that the small lipoprotein Lpp, which is the most abundant protein in E. coli, exists in two forms. The 'bound' form of the protein is tethered to the outer membrane (OM) by its N-terminal lipid moiety and covalently attached to the cell wall by its C-terminal lysine residue. The exact location of the 'free' form, however, has never been determined. In this issue of Molecular Microbiology, Cowles et al. demonstrate that the free form of Lpp is an integral OM protein whose C-terminus is exposed on the cell surface. The new study provides the first example of a lipoprotein that has a dual localization and adds to a growing body of evidence that lipoproteins can span the OM despite the lack of an obvious transmembrane segment. Furthermore, the new results raise intriguing questions about the assembly of both lipoproteins and other types of OM proteins.

The free and bound forms of Lpp occupy distinct subcellular locations in Escherichia coli

The lipoprotein Lpp is the most numerically abundant protein in Escherichia coli, has been investigated for over 40 years, and has served as the paradigmatic bacterial lipoprotein since its initial discovery. It exists in two distinct forms: a 'bound-form', which is covalently bound to the cell's peptidoglycan layer, and a 'free-form', which is not. Although it is known that the carboxyl-terminus of bound-form Lpp is located in the periplasm, the precise location of free-form Lpp has never been determined. For decades, it has been widely assumed that free-form Lpp is associated with bound-form. In this work, we show that the free and bound forms of Lpp are not largely associated with each other, but are found in distinct subcellular locations. Our results indicate that free-form Lpp spans the outer membrane and is surface-exposed, whereas bound-form Lpp resides in the periplasm. Thus, Lpp represents a novel example of a single lipoprotein that is able to occupy distinct subcellular locations, and challenges models in which the free and bound forms of Lpp are assumed to be associated with each other.

Alpha-helical peptide assemblies giving new function to designed structures

The design of alpha-helical tectons for self-assembly is maturing as a science. We have now reached the point where many different coiled-coil topologies can be reliably produced and validated in synthetic systems and the field is now moving on towards more complex, discrete structures and applications. Similarly the design of infinite or fiber assemblies has also matured, with the creation fibers that have been modified or functionalized in a variety of ways. This chapter discusses the progress made in both of these areas as well as outlining the challenges still to come.

Biogenesis and Membrane Targeting of Lipoproteins

Bacterial lipoproteins represent a unique class of membrane proteins, which are anchored to membranes through triacyl chains attached to the amino-terminal cysteine. They are involved in various functions localized in cell envelope. Escherichia coli possesses more than 90 species of lipoproteins, most of which are localized in the outer membrane, with others being in the inner membrane. All lipoproteins are synthesized in the cytoplasm with an N-terminal signal peptide, translocated across the inner membrane by the Sec translocon to the periplasmic surface of the inner membrane, and converted to mature lipoproteins through sequential reactions catalyzed by three lipoprotein-processing enzymes: Lgt, LspA, and Lnt. The sorting of lipoproteins to the outer membrane requires a system comprising five Lol proteins. An ATP-binding cassette transporter, LolCDE, initiates the sorting by mediating the detachment of lipoproteins from the inner membrane. Formation of the LolA-lipoprotein complex is coupled to this LolCDE-dependent release reaction. LolA accommodates the amino-terminal acyl chain of lipoproteins in its hydrophobic cavity, thereby generating a hydrophilic complex that can traverse the periplasmic space by diffusion. Lipoproteins are then transferred to LolB on the outer membrane and anchored to the inner leaflet of the outer membrane by the action of LolB. In contrast, since LolCDE does not recognize lipoproteins possessing Asp at position +2, these lipoproteins remain anchored to the inner membrane. Genes for Lol proteins are widely conserved among gram-negative bacteria, and Lol-mediated outer membrane targeting of lipoproteins is considered to be the general lipoprotein localization mechanism.

Self-assembly of coiled coils in synthetic biology: inspiration and progress

Biological self-assembly is very complex and results in highly functional materials. In effect, it takes a bottom-up approach using biomolecular building blocks of precisely defined shape, size, hydrophobicity, and spatial distribution of functionality. Inspired by, and drawing lessons from self-assembly processes in nature, scientists are learning how to control the balance of many small forces to increase the complexity and functionality of self-assembled nanomaterials. The coiled-coil motif, a multipurpose building block commonly found in nature, has great potential in synthetic biology. In this review we examine the roles that the coiled-coil peptide motif plays in self-assembly in nature, and then summarize the advances that this has inspired in the creation of functional units, assemblies, and systems.

Hydrophobic surface patches on LolA of Pseudomonas aeruginosa are essential for lipoprotein binding

Many lipoproteins reside in the outer membrane (OM) of Gram-negative bacteria, and their biogenesis is dependent on the Lol (localization of lipoproteins) system. The periplasmic chaperone LolA accepts OM-destined lipoproteins that are released from the inner membrane by the LolCDE complex and transfers them to the OM receptor LolB. The exact nature of the LolA-lipoprotein complex is still unknown. The crystal structure of Escherichia coli LolA features an open beta-barrel covered by alpha helices that together constitute a hydrophobic cavity, which would allow the binding of one acyl chain. However, OM lipoproteins contain three acyl chains, and the stoichiometry of the LolA-lipoprotein complex is 1:1. Here we present the crystal structure of Pseudomonas aeruginosa LolA that projects clear hydrophobic surface patches. Since these patches are large enough to accommodate acyl chains, their role in lipoprotein binding was investigated. Several LolA mutant proteins were created, and their functionality was assessed by studying their capacity to release lipoproteins produced in sphaeroplasts. Interruption of the largest hydrophobic patch completely destroyed the lipoprotein-releasing capacity of LolA, while interruption of smaller patches apparently reduced efficiency. Thus, the results show a new lipoprotein transport model that places (some of) the acyl chains on the hydrophobic surface patches.

Outer membrane protein I of Pseudomonas aeruginosa is a target of cationic antimicrobial peptide/protein

Cationic antimicrobial peptides/proteins (AMPs) are important components of the host innate defense mechanisms against invading microorganisms. Here we demonstrate that OprI (outer membrane protein I) of Pseudomonas aeruginosa is responsible for its susceptibility to human ribonuclease 7 (hRNase 7) and alpha-helical cationic AMPs, instead of surface lipopolysaccharide, which is the initial binding site of cationic AMPs. The antimicrobial activities of hRNase 7 and alpha-helical cationic AMPs against P. aeruginosa were inhibited by the addition of exogenous OprI or anti-OprI antibody. On modification and internalization of OprI by hRNase 7 into cytosol, the bacterial membrane became permeable to metabolites. The lipoprotein was predicted to consist of an extended loop at the N terminus for hRNase 7/lipopolysaccharide binding, a trimeric alpha-helix, and a lysine residue at the C terminus for cell wall anchoring. Our findings highlight a novel mechanism of antimicrobial activity and document a previously unexplored target of alpha-helical cationic AMPs, which may be used for screening drugs to treat antibiotic-resistant bacterial infection.

Heterotrimerization of heat-shock factors 1 and 2 provides a transcriptional switch in response to distinct stimuli

Organisms respond to circumstances threatening the cellular protein homeostasis by activation of heat-shock transcription factors (HSFs), which play important roles in stress resistance, development, and longevity. Of the four HSFs in vertebrates (HSF1-4), HSF1 is activated by stress, whereas HSF2 lacks intrinsic stress responsiveness. The mechanism by which HSF2 is recruited to stress-inducible promoters and how HSF2 is activated is not known. However, changes in the HSF2 expression occur, coinciding with the functions of HSF2 in development. Here, we demonstrate that HSF1 and HSF2 form heterotrimers when bound to satellite III DNA in nuclear stress bodies, subnuclear structures in which HSF1 induces transcription. By depleting HSF2, we show that HSF1-HSF2 heterotrimerization is a mechanism regulating transcription. Upon stress, HSF2 DNA binding is HSF1 dependent. Intriguingly, when the elevated expression of HSF2 during development is mimicked, HSF2 binds to DNA and becomes transcriptionally competent. HSF2 activation leads to activation of also HSF1, revealing a functional interdependency that is mediated through the conserved trimerization domains of these factors. We propose that heterotrimerization of HSF1 and HSF2 integrates transcriptional activation in response to distinct stress and developmental stimuli.

Defining the role of salt bridges in protein stability

Although the energetic balance of forces stabilizing proteins has been established qualitatively over the last decades, quantification of the energetic contribution of particular interactions still poses serious problems. The reasons are the strong cooperativity and the interdependence ofnoncovalent interactions. Salt bridges are a typical example. One expects that ionizable side chains frequently form ion pairs in innumerable crystal structures. Since electrostatic attraction between opposite charges is strong per se, salt bridges can intuitively be regarded as an important factor stabilizing the native structure. Is that really so? In this chapter we critically reassess the available methods to delineate the role ofelectrostatic interactions and salt bridges to protein stability, and discuss the progress and the obstacles in this endeavor. The basic problem is that formation of salt bridges depends on the ionization properties of the participating groups, which is significantly influenced by the protein environment. Furthermore, salt bridges experience thermal fluctuations, continuously break and re-form, and their lifespan in solution is governed by the flexibility of the protein. Finally, electrostatic interactions are long-range and might be significant in the unfolded state, thus seriously influencing the energetic profile. Elimination of salt bridges by protonation/deprotonation at extreme pH or by mutation provides only rough energetic estimates, since there is no way to account for the nonadditive response of the protein moiety. From what we know so far, the strength of electrostatic interactions is strongly context-dependent, yet it is unlikely that salt bridges are dominant factors governing protein stability. Nevertheless, proteins from thermophiles and hyperthermophiles exhibit more, and frequently networked, salt bridges than proteins from the mesophilic counterparts. Increasing the thermal (not the thermodynamic) stability of proteins by optimization of charge-charge interactions is a good example for an evolutionary solution utilizing physical factors.

Electrostatic contribution to the thermodynamic and kinetic stability of the homotrimeric coiled coil Lpp-56: A computational study

The protein moiety of the Braun's E. coli outer membrane lipoprotein (Lpp-56) is an attractive object of biophysical investigation in several aspects. It is a homotrimeric, parallel coiled coil, a class of coiled coils whose stability and folding have been studied only occasionally. Lpp-56 possesses unique structural properties and exhibits extremely low rates of folding and unfolding. It is natural to ask how the specificity of the structure determines the extraordinary physical chemical properties of this protein. Recently, a seemingly controversial data on the stability and unfolding rate of Lpp-56 have been published (Dragan et al., Biochemistry 2004;43: 14891-14900; Bjelic et al., Biochemistry 2006;45:8931-8939). The unfolding rate constant measured using GdmCl as the denaturing agent, though extremely low, was substantially higher than that obtained on the basis of thermal unfolding. If this large difference arises from the effect of screening of electrostatic interactions induced by GdmCl, electrostatic interactions would appear to be an important factor determining the unusual properties of Lpp-56. We present here a computational analysis of the electrostatic properties of Lpp-56 combining molecular dynamics simulations and continuum pK calculations. The pH-dependence of the unfolding free energy is predicted in good agreement with the experimental data: the change in DeltaG between pH 3 and pH 7 is approximately 60 kJ mol(-1). The results suggest that the difference in the stability of the protein observed using different experimental methods is mainly because of the effect of the reduction of electrostatic interactions when the salt (GdmCl) concentration increases. We also find that the occupancy of the interhelical salt bridges is unusually high. We hypothesize that electrostatic interactions, and the interhelical salt bridges in particular, are an important factor determining the low unfolding rate of Lpp-56.

Covalent attachment of proteins to peptidoglycan

Bacterial surface proteins are key players in host-symbiont or host-pathogen interactions. How these proteins are targeted and displayed at the cell surface are challenging issues of both fundamental and clinical relevance. While surface proteins of Gram-negative bacteria are assembled in the outer membrane, Gram-positive bacteria predominantly utilize their thick cell wall as a platform to anchor their surface proteins. This surface display involves both covalent and noncovalent interactions with either the peptidoglycan or secondary wall polymers such as teichoic acid or lipoteichoic acid. This review focuses on the role of enzymes that covalently link surface proteins to the peptidoglycan, the well-known sortases in Gram-positive bacteria, and the recently characterized l,d-transpeptidases in Gram-negative bacteria.

Identification of the L,D-transpeptidases responsible for attachment of the Braun lipoprotein to Escherichia coli peptidoglycan

The L,D-transpeptidase Ldt(fm) catalyzes peptidoglycan cross-linking in beta-lactam-resistant mutant strains of Enterococcus faecium. Here, we show that in Escherichia coli Ldt(fm) homologues are responsible for the attachment of the Braun lipoprotein to murein, indicating that evolutionarily related domains have been tailored to use muropeptides or proteins as acyl acceptors in the L,D-transpeptidation reaction.

Conformational Transition between Four and Five-stranded Phenylalanine Zippers Determined by a Local Packing Interaction

Alpha-helical coiled coils play a crucial role in mediating specific protein-protein interactions. However, the rules and mechanisms that govern helix-helix association in coiled coils remain incompletely understood. Here we have engineered a seven heptad "Phe-zipper" protein (Phe-14) with phenylalanine residues at all 14 hydrophobic a and d positions, and generated a further variant (Phe-14(M)) in which a single core Phe residue is substituted with Met. Phe-14 forms a discrete alpha-helical pentamer in aqueous solution, while Phe-14(M) folds into a tetrameric helical structure. X-ray crystal structures reveal that in both the tetramer and the pentamer the a and d side-chains interlock in a classical knobs-into-holes packing to produce parallel coiled-coil structures enclosing large tubular cavities. However, the presence of the Met residue in the apolar interface of the tetramer markedly alters its local coiled-coil conformation and superhelical geometry. Thus, short-range interactions involving the Met side-chain serve to preferentially select for tetramer formation, either by inhibiting a nucleation step essential for pentamer folding or by abrogating an intermediate required to form the pentamer. Although specific trigger sequences have not been clearly identified in dimeric coiled coils, higher-order coiled coils, as well as other oligomeric multi-protein complexes, may require such sequences to nucleate and direct their assembly.

Borrelia burgdorferi lipoproteins are secreted to the outer surface by default

Borrelia spirochaetes are unique among diderm bacteria in their abundance of surface-displayed lipoproteins, some of which play important roles in the pathogenesis of Lyme disease and relapsing fever. To identify the lipoprotein-sorting signals in Borrelia burgdorferi, we generated chimeras between the outer surface lipoprotein OspA, the periplasmic oligopeptide-binding lipoprotein OppAIV and mRFP1, a monomeric red fluorescent reporter protein. Localization of OspA and OppAIV point mutants showed that Borrelia lipoproteins do not follow the '+2' sorting rule which targets lipoproteins to the cytoplasmic or outer membrane of Gram-negative bacteria via the Lol pathway. Fusions of mRFP1 to short N-terminal lipopeptides of OspA, and surprisingly OppAIV, were targeted to the spirochaetal surface. Mutagenesis of the OspA N-terminus defined less than five N-terminal amino acids as the minimal secretion-facilitating signal. With the exception of negative charges, which can act as partial subsurface retention signals in certain peptide contexts, lipoprotein secretion occurs independent of N-terminal sequence. Together, these data indicate that Borrelia lipoproteins are targeted to the bacterial surface by default, but can be retained in the periplasm by sequence-specific signals.

Towards a comprehensive view of the bacterial cell wall

Direct in vivo visualization, in full atomic detail, of the microbial cell wall and its stress-bearing structural architecture remains one of the prime challenges in microbiology. In the meantime, molecular modeling can provide a framework for explaining and predicting mechanisms involved in morphogenesis, bacterial cell growth and cell division, during which the wall and its major structural component--murein--have to protect the cell from osmotic pressure and multiple tensile forces. Here, we illustrate why the scaffold concept of murein architecture provides a more comprehensive representation of bacterial cell wall physiology than previous models.

Atomic structure of a tryptophan-zipper pentamer

Coiled-coil motifs are ubiquitous mediators of specific protein-protein interactions through the formation of interlocking hydrophobic seams between alpha-helical chains. Residues that form these seams occur at the first (a) and fourth (d) positions of a characteristic 7-aa repeat and are primarily aliphatic. The potential of aromatic residues to promote helix association in a coiled coil was explored by engineering a "Trp-zipper" protein with Trp residues at all 14 a and d positions. The protein forms a discrete, stable, alpha-helical pentamer in water at physiological pH. Its 1.45-A crystal structure reveals a parallel, five-stranded coiled coil, a previously uncharacterized type of "knobs-into-holes" packing interaction between interfacial Trp side chains, and an unusual approximately 8-A-diameter axial channel lined with indole rings that is filled with polyethylene glycol 400 and water and sulfate ion molecules. The engineered Trp-zipper pentamer enlarges current views of coiled-coil assembly, molecular recognition, and protein engineering, and may serve as a soluble model for membrane ion channels.

Depletion of apolipoprotein N-acyltransferase causes mislocalization of outer membrane lipoproteins in Escherichia coli

Lipoproteins in Gram-negative Enterobacteriaceae carry three fatty acids on the N-terminal cysteine residue, two as a diacylglyceride and one through an N-linkage following signal peptide cleavage. Most lipoproteins are anchored in the outer membrane, facing the periplasm, but some lipoproteins remain in the plasma membrane, depending on the amino acid at position +2, immediately after the fatty-acylated cysteine. In vitro, the last step in lipoprotein maturation, N-acylation of apolipoproteins by the plasma membrane apolipoprotein N-acyltransferase (Lnt), is necessary for efficient recognition of outer membrane lipoproteins by the Lol system, which transports them from the plasma to the outer membrane (Fukuda, A., Matsuyama, S.-I., Hara, T., Nakayama, J., Nagasawa, H., and Tokuda, H. (2002) J. Biol. Chem. 277, 43512-43518). To study the role of Lnt in vivo, we constructed a conditional lnt mutant of Escherichia coli. The apo-form of peptidoglycan-anchored major lipoprotein (Lpp) and two other outer membrane lipoproteins accumulated in the plasma membrane when lnt expression was reduced. We also found that Lnt is an essential protein in E. coli and that the lethality is partially because of the retention of apoLpp in the plasma membrane. Topology mapping of Lnt with beta-galactosidase and alkaline phosphatase fusions indicated the presence of six membrane-spanning segments. The lnt gene in a mutant of Salmonella enterica displaying thermosensitive Lnt activity (Gupta, S. D., Gan, K., Schmid, M. B., and Wu, H. C. (1993) J. Biol. Chem. 268, 16551-16556) was found to carry a mutation causing a single glutamate to lysine substitution at a highly conserved position in the last predicted periplasmic loop of the protein.

Targeting and translocation of two lipoproteins in Escherichia coli via the SRP/Sec/YidC pathway

In Escherichia coli, two main protein targeting pathways to the inner membrane exist: the SecB pathway for the essentially posttranslational targeting of secretory proteins and the SRP pathway for cotranslational targeting of inner membrane proteins (IMPs). At the inner membrane both pathways converge at the Sec translocase, which is capable of both linear transport into the periplasm and lateral transport into the lipid bilayer. The Sec-associated YidC appears to assist the lateral transport of IMPs from the Sec translocase into the lipid bilayer. It should be noted that targeting and translocation of only a handful of secretory proteins and IMPs have been studied. These model proteins do not include lipoproteins. Here, we have studied the targeting and translocation of two secretory lipoproteins, the murein lipoprotein and the bacteriocin release protein, using a combined in vivo and in vitro approach. The data indicate that both murein lipoprotein and bacteriocin release protein require the SRP pathway for efficient targeting to the Sec translocase. Furthermore, we show that YidC plays an important role in the targeting/translocation of both lipoproteins.

Helix formation and the unfolded state of a 52-residue helical protein

A growing class of proteins in biological processes has been found to be unfolded on isolation under normal solution conditions. We have used NMR spectroscopy to characterize the structural and dynamic properties of the unfolded and partially folded states of a 52-residue alanine-rich protein (Ala-14) at temperatures from -5 degrees C to 40 degrees C. At 40 degrees C, alanine residues in Ala-14 adopt phi and psi angles, consistent with a significant ensemble population of polyproline II conformation. Analysis of relaxation rates in the protein reveals that a series of residues, Gln 35-Ala 36-Ala 37-Lys 38-Asp 39-Asp 40-Ala 41-Ala 42, displays slow motional dynamics at both -5 degrees C and 40 degrees C. Temperature-dependent chemical shift changes indicate that this region is the site of helix initiation. The remaining N-terminal residues become increasingly dynamic as they extend from the nucleation site. The C terminus remains dynamic and changes less with temperature, indicating it is relatively unstructured. Ala-14 provides a high-resolution portrait of the unfolded state and the process of helix nucleation and propagation in the absence of tertiary contacts, information that bears on early events in protein folding.

Deletion analyses of the peptidoglycan-associated lipoprotein Pal reveals three independent binding sequences including a TolA box

The Tol-Pal system of the Escherichia coli cell envelope is composed of five proteins. TolQ, TolR and TolA form a complex in the inner membrane, whereas TolB is a periplasmic protein interacting with Pal, the peptidoglycan-associated lipoprotein anchored to the outer membrane. This system is required for outer membrane integrity and has been shown to form a trans-envelope bridge linking inner and outer membranes. The TolA-Pal interaction plays an important role in the function of this system and has been found to depend on the proton motive force and the TolQ and TolR proteins. The Pal lipoprotein interacts with many components, such as TolA, TolB, OmpA, the major lipoprotein and the murein layer. In this study, six pal deletions were constructed. The analyses of the resulting Pal protein functions and interactions defined an N-terminal region of 40 residues, which can be deleted without any cell-damaging effect, and three independent regions required for its interaction with TolA, OmpA and TolB or the peptidoglycan. The analyses of the integrity of the cells producing the various Pal lipoproteins revealed strong outer membrane destabilization only when binding regions were deleted. Furthermore, a conserved polypeptide sequence located downstream of the peptidoglycan binding motif of Pal was required for the TolA-Pal interaction and for the maintenance of outer membrane stability.

Cryo-transmission electron microscopy of frozen-hydrated sections of Escherichia coli and Pseudomonas aeruginosa

High-pressure freezing of Escherichia coli K-12 and Pseudomonas aeruginosa PAO1 in the presence of cryoprotectants provided consistent vitrification of cells so that frozen-hydrated sections could be cut, providing approximately 2-nm resolution of structure. The size and shape of the bacteria, as well as their surface and cytoplasmic constituents, were nicely preserved and compared well with other published high-resolution techniques. Cells possessed a rich cytoplasm containing a diffuse dispersion of ribosomes and genetic material. Close examination of cells revealed that the periplasmic space was compressed during cryosectioning, a finding which provided supporting evidence that this space is filled by a compressible gel. Since the outer membrane and peptidoglycan layer are bonded together via lipoproteins, the space between them (although still part of the periplasmic space) was not as compacted. Even when this cryosectioning compression was taken into account, there was still substantial variability in the width of the periplasmic space. It is possible that the protoplast has some capacity to float freely within the periplasm.

An alanine-zipper structure determined by long range intermolecular interactions

A major challenge in protein folding is to identify and quantify specific structural determinants that allow native proteins to acquire their unique folded structures. Here we report the engineering of a 52-residue protein (Ala-14) that contains exclusively alanine residues at the hydrophobic a and d positions of a natural heptad-repeat sequence. Ala-14 is unfolded under normal solution conditions yet forms a parallel three-stranded alpha-helical coiled coil in crystals. Ala-14 trimers in the solid state associate with each other through the pairing of polar side chains and formation of an extended network of water-mediated hydrogen bonds. In contrast to the classical view that local intramolecular tertiary interactions dictate the three-dimensional structure of small single-domain proteins, Ala-14 shows that long range intermolecular interactions can be essential in determining the metastable alanine-zipper structure. A similar interplay between short range local and longer range global forces may underlie the conformational properties of the growing class of natively unstructured proteins in biological processes.

Unfolding of a leucine zipper is not a simple two-state transition

Temperature-induced unfolding of the leucine zipper, an alpha-helical, double-stranded, coiled-coil, was studied by circular dichroism spectroscopy, spectrofluorimetry and heat capacity scanning calorimetry. It is shown that this process does not represent a simple two-state transition, as previously believed, but consists of several stages. The first transition starts at the very beginning of heating from 0 degrees C and proceeds with significant heat absorption and decrease of ellipticity. This transition does not depend on the concentration of protein and is sensitive to modification of the N terminus; it is therefore associated with unfolding or fraying of this part of the leucine zipper. The second transition takes place at a considerably higher temperature; it is more pronounced than the first one and does not depend on the concentration of protein, i.e. it is unimolecular. This transition is sensitive to modification of both termini of the leucine zipper and affects the optical properties of a tryptophan residue placed in the central part of the zipper. It therefore involves the whole dimer but does not result in its dissociation, presumably being associated with some repacking of the coiled-coil. This second transition is followed at higher temperatures by the concentration-dependent cooperative unfolding/dissociation of the two strands. The enthalpy and entropy of the temperature-induced structural changes of the leucine zipper that take place before its cooperative unfolding/dissociation comprises almost 40% of the total enthalpy and entropy of unfolding of the completely folded coiled-coil, the state in which it appears to be below 0 degrees C. Comparison of the total enthalpy of leucine zipper unfolding with that of a single-stranded alpha-helix shows that their temperature-dependence correlates with the extent of intramolecular non-polar contacts and allows an assessment of the enthalpy of hydrogen bonding in alpha-helices, which appears to be about 3.3kJmol(-1) at 20 degrees C.

Core side-chain packing and backbone conformation in Lpp-56 coiled-coil mutants

Native proteins exhibit precise geometric packing of atoms in their hydrophobic interiors. Nonetheless, controversy remains about the role of core side-chain packing in specifying and stabilizing the folded structures of proteins. Here we investigate the role of core packing in determining the conformation and stability of the Lpp-56 trimerization domain. The X-ray crystal structures of Lpp-56 mutants with alanine substitutions at two and four interior core positions reveal trimeric coiled coils in which the twist of individual helices and the helix-helix spacing vary significantly to achieve the most favored superhelical packing arrangement. Introduction of each alanine "layer" into the hydrophobic core destabilizes the superhelix by 1.4 kcal mol(-1). Although the methyl groups of the alanine residues pack at their optimum van der Waals contacts in the coiled-coil trimer, they provide a smaller component of hydrophobic interactions than bulky hydrophobic side-chains to the thermodynamic stability. Thus, specific side-chain packing in the hydrophobic core of coiled coils are important determinants of protein main-chain conformation and stability.

Mechanisms of colicin binding and transport through outer membrane porins

To kill Escherichia coli, toxic proteins, called colicins, pass through the permeability barrier created by the outer membrane (OM) of the bacterial cell envelope. We consider a variety of different colicins, including A, B, D, E1, E3, Ia, M and N, that penetrate through the porins OmpF, FepA, BtuB, Cir and FhuA, to subsequently interact with a few targets in the periplasm, including TolA, TolB, TolC and TonB. We review the mechanisms, demonstrated and postulated, by which such toxins enter bacterial cells, from the initial binding stage on the cell surface to the internalization reaction through the OM bilayer. Our discussions endeavor to answer two main questions: what is the origin of colicin-binding affinity and specificity, and after adsorption to OM porins, do colicin polypeptides translocate through porin channels, or enter by another, currently unknown pathway?

Pal lipoprotein of Escherichia coli plays a major role in outer membrane integrity

The Tol-Pal system of gram-negative bacteria is composed of five proteins. TolA, TolQ, and TolR are inner membrane proteins, TolB is a periplasmic protein, and Pal, the peptidoglycan-associated lipoprotein, is anchored to the outer membrane. In this study, the roles of Pal and major lipoprotein Lpp were compared in Escherichia coli. lpp and tol-pal mutations have previously been found to perturb the outer membrane permeability barrier and to cause the release of periplasmic proteins and the formation of outer membrane vesicles. In this study, we showed that the overproduction of Pal is able to restore the outer membrane integrity of an lpp strain but that overproduced Lpp has no effect in a pal strain. Together with the previously reported observation that overproduced TolA complements an lpp but not a pal strain, these results indicate that the cell envelope integrity is efficiently stabilized by an epistatic Tol-Pal system linking inner and outer membranes. The density of Pal was measured and found to be lower than that of Lpp. However, Pal was present in larger amounts compared to TolA and TolR proteins. The oligomeric state of Pal was determined and a new interaction between Pal and Lpp was demonstrated.

Domains of surfactant protein A that affect protein oligomerization, lipid structure and surface tension

Surfactant protein A (SP-A) is an abundant protein found in pulmonary surfactant which has been reported to have multiple functions. In this review, we focus on the structural importance of each domain of SP-A in the functions of protein oligomerization, the structural organization of lipids and the surface-active properties of surfactant, with an emphasis on ultrastructural analyses. The N-terminal domain of SP-A is required for disulfide-dependent protein oligomerization, and for binding and aggregation of phospholipids, but there is no evidence that this domain directly interacts with lipid membranes. The collagen-like domain is important for the stability and oligomerization of SP-A. It also contributes shape and dimension to the molecule, and appears to determine membrane spacing in lipid aggregates such as common myelin and tubular myelin. The neck domain of SP-A is primarily involved in protein trimerization, which is critical for many protein functions, but it does not appear to be directly involved in lipid interactions. The globular C-terminal domain of SP-A clearly plays a central role in lipid binding, and in more complex functions such as the formation and/or stabilization of curved membranes. In recent work, we have determined that the maintenance of low surface tension of surfactant in the presence of serum protein inhibitors requires cooperative interactions between the C-terminal and N-terminal domains of the molecule. This effect of SP-A requires a high degree of oligomeric assembly of the protein, and may be mediated by the activity of the protein to alter the form or physical state of surfactant lipid aggregates.