Re-evaluation of the WHO (2010) formaldehyde indoor air quality guideline for cancer risk assessment

Long-term residential exposure to air pollution and Hodgkin lymphoma risk among adults in Denmark: a population-based case-control study

PURPOSE

The etiology of Hodgkin lymphoma (HL) is obscure. Research on air pollution and risk of HL provides inconsistent results. We aimed to investigate the association between long-term residential exposure to air pollution and risk of adult Hodgkin lymphoma in Denmark.

METHODS

We performed a nationwide register-based case-control study, including all (n = 2,681) Hodgkin lymphoma cases registered in the nationwide Danish Cancer Registry between 1989 and 2014. We randomly selected 8,853 age- and sex-matched controls from the entire Danish population using the Civil Registration System, and identified 20-year residential address history for all cases and controls. We modeled outdoor air pollution concentrations at all these addresses using the high-resolution multiscale air pollution model system DEHM/UBM/AirGIS. We used conditional logistic regression to estimate odds ratios adjusted for individual and neighborhood level sociodemographic variables.

RESULTS

There was no association between 1, 5, 10, and 20 years' time-weighted average exposure to fine particles (PM_2.5), O₃, SO_2, NO_2, or the PM_2.5 constituents OC, NH₄, NO₃, and SO₄ and risk of Hodgkin lymphoma.

CONCLUSION

Residential exposure to ambient air pollution does not seem to increase the risk of developing Hodgkin lymphoma.

The role of phase I, phase II, and DNA-repair gene polymorphisms in the damage induced by formaldehyde in pathologists

Formaldehyde (FA) is a human carcinogen used as formalin in hospital laboratories. We evaluated its association with human chromosomal aberrations (CAs) and the risk/protective role played by several genetic polymorphisms in this relationship, on a cohort of 57 exposed pathologists vs 48 controls. All subjects were assessed for CAs on peripheral blood lymphocytes and genotyped for the most common cancer-associated gene polymorphisms which could be related with the genotoxic outcome: CYP1A1 exon 7 (A>G), CYP1A1*2A (T>C), CYP2C19*2 (G>A), GSTT1 (Positive/Null), GSTM1 (Positive/null), GSTP1 (A>G), XRCC1 (G399A), XRCC1 (C194T), XRCC1 (A280G), XPD (A751C), XPC exon 15 (A939C), XPC exon 9 (C499T), TNFα - 308 (G>A), IL10 - 1082 (G>A), IL10 - 819 (C>T) and IL6 - 174 (G>C). Air-FA concentration was assessed through personal samplers. The comparison between pathologists and controls showed a significantly higher CAs frequency in pathologists. Significant positive correlations were found between CAs frequency and air-FA concentration while significant associations were found between variation in CAs frequency and the mutated allele for CYP1A1 exon 7 (A>G), CYP2C19*2 (G>A), GSTT1-positive, GSTM1-positive and XRCC1 (G399A). Our study confirms the role of FA as genotoxicity inductor, even in workers chronically exposed to low air-FA levels and reveals the role played by some genetic polymorphisms in this association, highlighting the importance of individual susceptibility biomarkers assessment in occupational health studies.

Current State of Indoor Air Phytoremediation Using Potted Plants and Green Walls

Urban civilization has a high impact on the environment and human health. The pollution level of indoor air can be 2–5 times higher than the outdoor air pollution, and sometimes it reaches up to 100 times or more in natural/mechanical ventilated buildings. Even though people spend about 90% of their time indoors, the importance of indoor air quality is less noticed. Indoor air pollution can be treated with techniques such as chemical purification, ventilation, isolation, and removing pollutions by plants (phytoremediation). Among these techniques, phytoremediation is not given proper attention and, therefore, is the focus of our review paper. Phytoremediation is an affordable and more environmentally friendly means to purify polluted indoor air. Furthermore, studies show that indoor plants can be used to regulate building temperature, decrease noise levels, and alleviate social stress. Sources of indoor air pollutants and their impact on human health are briefly discussed in this paper. The available literature on phytoremediation, including experimental works for removing volatile organic compound (VOC) and particulate matter from the indoor air and associated challenges and opportunities, are reviewed. Phytoremediation of indoor air depends on the physical properties of plants such as interfacial areas, the moisture content, and the type (hydrophobicity) as well as pollutant characteristics such as the size of particulate matter (PM). A comprehensive summary of plant species that can remove pollutants such as VOCs and PM is provided. Sources of indoor air pollutants, as well as their impact on human health, are described. Phytoremediation and its mechanism of cleaning indoor air are discussed. The potential role of green walls and potted-plants for improving indoor air quality is examined. A list of plant species suitable for indoor air phytoremediation is proposed. This review will help in making informed decisions about integrating plants into the interior building design.

Chitin Nanocrystals as an Eco-friendly and Strong Anisotropic Adhesive

To solve the damage to the environment and human body caused by organic solvent adhesives in the utilization process, chitin nanocrystal (ChNC) suspension is explored as a strong anisotropic adhesive, which is an eco-friendly and water-based adhesive with high adhesive strength. ChNCs extracted from crab shells are rod-like nanoparticles with high aspect ratios, which are mainly employed as reinforcing polymer nanocomposites and biomedicine nanomaterials. ChNC suspension sandwiched between substrates forms a long-range ordered superstructure by a self-assembly process. ChNC nanoglue exhibits high anisotropy adhesion strength, i.e., an in-plane shear strength (5.26 MPa) and an out-of-plane shear strength (0.46 MPa) for glass substrates. Moreover, the ChNC nanoglue is suitable to many substrates, such as glass, plastic, wood, metal, paper, etc. The ChNC nanoglue shows high biocompatibility toward the fibroblast cell and rat skin, proving their excellent biosafety. As an eco-friendly and high-performance adhesive, ChNC nanoglue shows promising applications in daily life and industrial fields.

Using mechanistic information to support evidence integration and synthesis: a case study with inhaled formaldehyde and leukemia

Formaldehyde is one of the most comprehensively studied chemicals, with over 30 years of research focused on understanding the development of cancer following inhalation. The causal conclusions regarding the potential for leukemia are largely based on the epidemiological literature, with little consideration of cancer bioassays, dosimetry studies, and mechanistic research, which challenge the biological plausibility of the disease. Recent reanalyzes of the epidemiological literature have also raised significant questions related to the purported associations between formaldehyde and leukemia. Because of this, considerable scientific debate and uncertainty remain on whether there is a causal association between formaldehyde inhalation exposure and leukemia. Further complexity in evaluating this association is related to the endogenous production of formaldehyde. Multiple modes of action (MOA) have been postulated for the development of leukemia following formaldehyde inhalation that includes unsupported hypotheses of direct or indirect toxicity to the target cell population. Herein, the available evidence relevant to evaluating the postulated MOAs for leukemia following formaldehyde inhalation exposure is organized in the IPCS MOA Framework. The integration of all the available evidence clearly highlights the limited amount of data that support any of the postulated MOAs and demonstrates a significant amount of research supporting the null hypothesis that there is no causal association between formaldehyde inhalation exposure and leukemia. These analyses result in a lack of confidence in any of the postulated MOAs, increasing confidence in the conclusion that there is a lack of biological plausibility for a causal association between formaldehyde inhalation exposure and leukemia.

How Is Indoor Air Quality during Sleep? A Review of Field Studies

This review aimed to provide an overview of the characterisation of indoor air quality (IAQ) during the sleeping period, based only on real life conditions’ studies where, at least, one air pollutant was considered. Despite the consensual complexity of indoor air, when focusing on sleeping environments, the available scientific literature is still scarce and falls to provide a multipollutants’ characterisation of the air breathed during sleep. This review, following PRISMA’s approach, identified a total of 22 studies that provided insights of how IAQ is during the sleeping period in real life conditions. Most of studies focused on carbon dioxide (77%), followed by particles (PM2.5, PM10 and ultrafines) and only 18% of the studies focused on pollutants such as carbon monoxide, volatile organic compounds and formaldehyde. Despite the high heterogeneity between studies (regarding the geographical area, type of surrounding environments, season of the year, type of dwelling, bedrooms’ ventilation, number of occupants), several air pollutants showed exceedances of the limit values established by guidelines or legislation, indicating that an effort should be made in order to minimise human exposure to air pollutants. For instance, when considering the air quality guideline of World Health Organisation of 10 µg·m−3 for PM2.5, 86% of studies that focused this pollutant registered levels above this threshold. Considering that people spend one third of their day sleeping, exposure during this period may have a significant impact on the daily integrated human exposure, due to the higher amount of exposure time, even if this environment is characterised by lower pollutants’ levels. Improving the current knowledge of air pollutants levels during sleep in different settings, as well as in different countries, will allow to improve the accuracy of exposure assessments and will also allow to understand their main drivers and how to tackle them.

Environmental toxicology wars: Organ-on-a-chip for assessing the toxicity of environmental pollutants

Environmental pollution is a widespread problem, which has seriously threatened human health and led to an increase of human diseases. Therefore, it is critical to evaluate environmental pollutants quickly and efficiently. Because of obvious inter-species differences between animals and humans, and lack of physiologically-relevant microenvironment, animal models and in vitro two-dimensional (2D) models can not accurately describe toxicological effects and predicting actual in vivo responses. To make up the limitations of conventional environmental toxicology screening, organ-on-a-chip (OOC) systems are increasingly developing. OOC systems can provide a well-organized architecture with comparable to the complex microenvironment in vivo and generate realistic responses to environmental pollutants. The feasibility, adjustability and reliability of OCC systems make it possible to offer new opportunities for environmental pollutants screening, which can study their metabolism, collective response, and fate in vivo. Further progress can address the challenges to make OCC systems better investigate and evaluate environmental pollutants with high predictive power.

Occupational exposure to formaldehyde, lifetime cancer probability, and hazard quotient in pathology lab employees in Iran: a quantitative risk assessment

Formaldehyde is a colorless and highly irritating substance that is used as a preservative and chemical fixative in tissue processing in pathological laboratories. Formaldehyde is mutagenic and is classified by the IARC as the definitive carcinogen (A1 group). This cross-sectional descriptive-analytical study was performed to determine the respiratory exposure of 60 employees of pathology labs with formaldehyde and to estimate carcinogenic and non-carcinogenic risk in Iran in 2018-2019. Occupational exposure to formaldehyde was assessed in summer season using the NIOSH 3500 method and a personal sampler with flow of 1 l/min connected to two Glass Midget Impingers containing 20 ml of 1% sodium bisulfate solution. The respiratory symptoms questionnaire provided by the American Thoracic Society was used to assess the health effects of formaldehyde exposure. The carcinogenic and non-carcinogenic risk assessment of inhaled exposure to formaldehyde was also performed using the USA Environmental Protection Agency (OEHHA) method. The mean respiratory exposure of employees to formaldehyde was 0.64 mg/m³ (range: 0.1474 to 1.3757). Occupational exposure in 28.3% (n = 17) of employees was above the OSHA recommended range. Wheezing (24%), burning eyes (25%), and cough (21.7%) were the most prevalent health problems. The mean ± SD of the carcinogenic risk among the employees was 3.45 × 10^-4 ± 2.27 × 10^-4. The highest mean of carcinogenic risk was found in lab workers (4.44 × 10^-4). Given the high level of carcinogenic and non-carcinogenic risk of respiratory exposure to formaldehyde in pathological employees, especially lab worker, the use of management controls, engineering controls, and respiratory protection equipment to reduce exposure levels of all workers to less than the allowed exposure limits seems necessary.

Development of a Simple and Powerful Analytical Method for Formaldehyde Detection and Quantitation in Blood Samples

Human beings are easily exposed to formaldehyde (FA) in a living environment. Entry of FA into the human body can have adverse effects on human health, depending on the FA concentration. Thus, a quantitative analysis of FA in blood is necessary in order to estimate its effect on the human body. In this study, a simple and rapid analytical method for the quantitation of FA in blood was developed. The total analysis time, including the pretreatment procedure, was less than 20 min. To ensure a stable analysis, blood samples were stabilized using tripotassium ethylenediaminetetraacetic acid solution, and FA was selectively derivatized using 2,4-dinitrophenylhydrazine as pretreatment procedures. The pretreated samples were analyzed using a high-performance liquid chromatography-UV system, which is the most common choice for analyzing small-molecule aldehydes like formaldehyde. Verification of the pretreatment methods (stabilization and derivatization) using FA standards confirmed that the pretreatment methods are highly reliable in the calibration range 0.012-5.761 ng μL-1 (slope = 684,898, R 2 = 0.9998, and limit of detection = 0.251 pg·μL-1). Analysis of FA in the blood samples of a Yucatan minipig using the new method revealed an average FA concentration of 1.98 ± 0.34 ng μL-1 (n = 3). Blood samples spiked with FA standards were analyzed, and the FA concentrations were found to be similar to the theoretical concentrations (2.16 ± 0.81% difference). The method reported herein can quantitatively analyze FA in blood at a sub-nanogram level within a short period of time and is validated for application in blood analysis.

Long-term exposure to formaldehyde induced down-regulation of SPO11 in rats

Objective: Formaldehyde, a ubiquitous environmental contaminant, has long been suspected of causing male reproductive injury, but the underlying molecular mechanism remains largely unknown. SPO11 is a meiosis-related gene, whose absence can cause spermatogenesis arrest. Materials and methods: The present study aimed to explore the role of SPO11 in male reproductive injury induced by long-term formaldehyde exposure, so as to further understand the molecular mechanism of formaldehyde-induced male reproductive toxicity. Adult male Sprague-Dawley rats (n = 24, 245 ± 22 g) were randomly divided into four groups of six (n = 6) and were exposed to formaldehyde gas at doses of 0 (control), 0.5, 2.46 and 5 mg/m³, respectively, via inhalation for 8 consecutive weeks. Results and dissussion: The expression levels of SPO11 were detected in testicular tissues by real-time quantitative polymerase chain reaction, immunofluorescence, and Western blot. The results indicated that the expression of SPO11 was inhibited by formaldehyde exposure in a dose-dependent manner. Furthermore, the histopathological results showed that testicular seminiferous tubules were atrophied, spermatogenic cells were decreased and the lumina were oligozoospermic in the 2.46 and 5 mg/m³ formaldehyde exposure groups. Combined with the morphometric results, we found that the downregulated expression levels of SPO11 were consistent with the changes of testicular seminiferous tubule diameter and seminiferous epithelium height in testicular tissue, suggesting that SPO11 might be one of the main targets of formaldehyde reproductive toxicity. Conclusions: In conclusion, our findings indicated that SPO11 might be related to male reproductive injuries induced by long-term formaldehyde exposure.

Exposure to formaldehyde at low temperatures aggravates allergic asthma involved in transient receptor potential ion channel

Studies have indicated that formaldehyde and low temperature are considered to be the factors associated with several respiratory diseases. However, the effect of co-exposure to formaldehyde and low temperature on allergic asthma, and the potential mechanisms, are unknown. In this study, an allergic asthma mouse model was built and mice were exposed to 0.8 mg/m³ formaldehyde and/or subjected to low temperatures of 16 °C. The data showed that exposure to either low temperature or formaldehyde did not induce a significant aggravation on allergic asthma. However, simultaneous exposure to formaldehyde and low temperature was shown to aggravate mucus hypersecretion and inflammation in the lung, lead to an exacerbation of allergic asthma. After blocking the TRPM8 and TRPA1 ion channels, the levels of inflammatory factors reduced. These results demonstrated that co-exposure to formaldehyde and low temperature exacerbate allergic asthma, and that TRPM8 and TRPA1 are involved in this process.

How improvements in monitoring and safety practices lowered airborne formaldehyde concentrations at an Italian university hospital: a summary of 20 years of experience

The last two decades have been crucial for the assessment of airborne formaldehyde (FA) exposure in healthcare environments due to changes in limits and reference values, definition of carcinogenicity, and new monitoring methods. The aim of this study was to analyse twenty years (1999–2019) of experience in automatic, continuous airborne FA monitoring in the Pathology Laboratory and operating rooms at the Careggi University Hospital, Florence, Italy. These 20 years saw gradual improvements in FA monitoring of exposed employees considered at maximum risk, including improvements in analytical methods of detection and sampling strategies, which came with changes in procedures and workflow operations. In 2019, after the adoption of safe practices, including a closed-circuit system using pre-loaded containers and a vacuum sealing, 94 % of the total measurements (FA concentrations) were lower than 16 μg/m³, and only 6 % ranged from 21 to 75 μg/m³. In the studied work units, the ratio between area and personal readings ranged from 0.9 to 1.0, both for long and short-term sampling. Personal sampling was simplified with a new workstation, which integrated different monitoring systems into an innovative ergonomic armchair equipped with personal sampling devices. Area monitoring was also improved with a real-time, continuous photoacoustic instrument. Over these 20 years, FA exposure significantly dropped, which coincided with optimised histology workflow and implementation of safety practices. For high-throughput screening and cost savings we propose an innovative ergonomic armchair station which allows remote continuous monitoring.

RNA oxidation in chromatin modification and DNA-damage response following exposure to formaldehyde

Formaldehyde is an environmental and occupational chemical carcinogen implicated in the damage of proteins and nucleic acids. However, whether formaldehyde provokes modifications of RNAs such as 8-oxo-7,8-dihydroguanine (8-oxoG) and the role that these modifications play on conferring long-term adverse health effects remains unexplored. Here, we profile 8-oxoG modifications using RNA-immunoprecipitation and RNA sequencing (8-oxoG RIP-seq) to identify 343 RNA transcripts heavily enriched in oxidations in human bronchial epithelial BEAS-2B cell cultures exposed to 1 ppm formaldehyde for 2 h. RNA oxidation altered expression of many transcripts involved in chromatin modification and p53-mediated DNA-damage responses, two pathways that play key roles in sustaining genome integrity and typically deregulated in tumorigenesis. Given that these observations were identified in normal cells exhibiting minimal cell stress and death phenotypes (for example, lack of nuclear shrinkage, F-actin alterations or increased LDH activity); we hypothesize that oxidative modification of specific RNA transcripts following formaldehyde exposure denotes an early process occurring in carcinogenesis analogous to the oxidative events surfacing at early stages of neurodegenerative diseases. As such, we provide initial investigations of RNA oxidation as a potentially novel mechanism underlying formaldehyde-induced tumorigenesis.

Tolerance of fifteen hydroponic ornamental plant species to formaldehyde stress

An indoor formaldehyde enriched environment was created by an automatic fumigation system with timing and concentration control. Selected hydroponic plant species were exposed in formaldehyde concentrations of 10 mg m^-3, 50 mg m^-3 and 100 mg m^-3 respectively for 6 days with 10-h-treatment each day. Changes in morphological characteristics including leaf damage rate, leaf damage time and survival rate were monitored to evaluate morphological resistance to formaldehyde. Assessed physiological parameters were leaf chlorophyll content (Chl), leaf malondialdehyde content (MDA), activity of leaf formaldehyde dehydrogenase (FADH), leaf water soluble sugar content (WSS), and leaf proline content (Pro). Under formaldehyde suppression, reduction of Chl and increase of MDA and Pro were observed. Varying by species, FADH and WSS peaked at certain formaldehyde concentrations. A Principal Component Analysis (PCA) method was adopted to evaluate key factors in hydroponic plants' tolerance to formaldehyde. Among the 15 species selected, the best 5 performing species are Spathiphyllum floribundum, Alocasia cucullata, Davallia bullata, Syngonium podophyllum 'Pixie', and Schefflera octophylla. The study helps people to select the best ornamental plants for indoor air pollution control. The response of hydroponic plant species to formaldehyde was studied for eco-friendly indoor air pollution control.

Normative formaldehyde-hemoglobin adduct levels among the US Population: Analysis of the 2013-2016 National Health and Nutrition Examination Survey

INTRODUCTION

Formaldehyde (FA) is currently classified as a known carcinogen. In addition to being a ubiquitous compound with many common exogenous exposure sources, it is also part of multiple metabolic pathways and present in every living cell. The objectives of this study were to determine normative levels of FA as measured by FA-Hemoglobin (Hb) adducts in the United States (US) and to determine if FA-Hb levels differ based on a variety of demographic factors.

METHODS

Data collected between 2013 and 2016 by the National Health and Nutrition Examination Survey were assessed from 4521 participants representing approximately 244 million individuals living in the US. General linear models were used to examine associations between FA-Hb adducts and sample characteristics. FA-Hb levels were summarized using geometric mean concentrations (GMC) and associated 95% confidence intervals (CI).

RESULTS

The overall GMC was 131.10 nmol/g Hb (95% CI 129.39-132.83). Analyses revealed no evidence to support associations between FA-Hb levels and age, gender, income, or nicotine use. Among adults, non-Hispanic Black race was associated with lower FA-Hb levels compared to all other race/ethnicity groups, P < 0.01.

CONCLUSION

The study provides the first normative values for FA in adults and children. These data could be a tool to assess the body's response to acute and chronic exposure.

Novel Materials for Combined Nitrogen Dioxide and Formaldehyde Pollution Control under Ambient Conditions

Formaldehyde (HCHO) and nitrogen dioxide (NO2) often co-exist in urban environments at levels that are hazardous to health. There is a demand for a solution to the problem of their combined removal. In this paper, we investigate catalysts, adsorbents and composites for their removal efficiency (RE) toward HCHO and NO2, in the context of creating a pollution control device (PCD). Proton-transfer-reaction mass spectrometry and cavity ring-down spectrometry are used to measure HCHO, and chemiluminescence and absorbance-based monitors for NO2. Commercially available and lab-synthesized materials are tested under relevant conditions. None of the commercial adsorbents are effective for HCHO removal, whereas two metal oxide-based catalysts are highly effective, with REs of 81 ± 4% and 82 ± 1%, an improvement on previous materials tested under similar conditions. The best performing material for combined removal is a novel composite consisting of a noble metal catalyst supported on a metal oxide, combined with a treated active carbon adsorbent. The composite is theorized to work synergistically to physisorb and oxidize HCHO and chemisorb NO2. It has an HCHO RE of 72 ± 2% and an NO2 RE of 96 ± 2%. This material has potential as the active component in PCDs used to reduce personal pollution exposure.

Synthesis of Pt-Loaded NiFe-LDH Nanosheets on Wood Veneer for Efficient Gaseous Formaldehyde Degradation

Traditional methods of removing gaseous formaldehyde are often associated with high energy consumption and secondary pollution. In this study, a new wood veneer-based composite decorated with Pt-loaded NiFe-LDH nanosheets is successfully developed by a hydrothermal reaction and impregnation-chemical reduction. NiFe-LDH nanosheets as an adsorbent can capture formaldehyde molecules through their abundant hydroxyl groups. Pt nanoparticles as catalytic centers are evenly distributed on the surface of NiFe-LDH to excite the O atoms linked to NiFe-LDH and absorbed oxygen, which will further attack the absorbed formaldehyde molecules to generate CO₂ and H₂O. And the wood veneer not only increases the active area of the catalyst by endowing it with good dispersion but also provides convenient channels for reactants and products. In a simulated dark environment at room temperature, this synthetic wood veneer-based composite exhibits admirable catalytic activity, which can effectively degrade almost all gaseous formaldehyde with the initial concentration of 0.2 mg m^-3 in 30 min and maintain a high catalytic activity of ≥97% after 10 cycles. This paper presents a feasible strategy for synthesizing an energy-efficient and ecofriendly wood veneer-based composite for efficient gaseous formaldehyde degradation at room temperature, which may play an important role in indoor air purification as a promising decorative material.

Recurrent Indoor Environmental Pollution and Its Impact on Health and Oxidative Stress of the Textile Workers in Bangladesh

Perennial indoor environmental pollution in the textile industrial area is a potential health hazard for workers engaged in this line of work, resulting in mental aberration to severe health risks. This study was designed to investigate the indoor environmental quality of textile industries and correlate its effect on the occupational health and well-being of the textile workers by measuring plasma oxidative stress status in textile workers and healthy control subjects. Environmental samples were collected from 15 textile industries located in Dhaka division, and 30 volunteer textile workers and 30 volunteer office workers (control) aged 18 to 57 years participated in the study. The concentration of plasma ascorbic acid (P-ASC), plasma malondialdehyde (P-MDA), and plasma conjugated diene (P-CD) was measured in both groups. The noise level (78.0 ± 0.68 dB) and the formaldehyde level (141.80 ± 4.47 µg/m³) were found to be significantly higher in the indoor environmental area compared with those in the control area (70.17 ± 0.25 dB and 108.0 ± 0.76 µg/m³, respectively). Furthermore, the daily average concentration of suspended particulate matters (PMs), that is, PM_2.5 (322.2 ± 13.46 µg/m³) and PM₁₀ (411.0 ± 17.57 µg/m³), was also found to be significantly higher in the indoor environmental air compared with that in the control area (78.59 ± 1.66 and 174.0 ± 2.33 µg/m³, respectively). The levels of P-MDA (0.37 ± 0.03 nmol/L) and P-CD (14.74 ± 0.61 nmol/L) were significantly increased, whereas the level of P-ASC level (0.46 ± 0.04 mg/dL) was markedly decreased in the textile workers compared with the healthy control subjects (0.18 ± 0.01 nmol/L of P-MDA, 10.04 ± 0.44 nmol/L of P-CD, and 1.29 ± 0.06 mg/dL of P-ASC). The textile plants were found to have significantly elevated levels of indoor environmental pollutants compared with those in the control area, and the textile workers were significantly exposed to oxidative stresses compared with the control subjects. The use of noise pads and high-efficiency air filters is perhaps highly instrumental to put an end to this prevailing situation. Moreover, to overcome the oxidative stresses among workers, supplementation of antioxidant vitamins (ie, ascorbic acid and/or vitamin E) may be beneficial. In addition, to prevent serious health-related issues, proper precautions should be taken to protect the occupational health of the textile workers.

Optofluidic Formaldehyde Sensing: Towards On-Chip Integration

Formaldehyde (HCHO), a chemical compound used in the fabrication process of a broad range of household products, is present indoors as an airborne pollutant due to its high volatility caused by its low boiling point (T=−19 °C). Miniaturization of analytical systems towards palm-held devices has the potential to provide more efficient and more sensitive tools for real-time monitoring of this hazardous air pollutant. This work presents the initial steps and results of the prototyping process towards on-chip integration of HCHO sensing, based on the Hantzsch reaction coupled to the fluorescence optical sensing methodology. This challenge was divided into two individually addressed problems: (1) efficient airborne HCHO trapping into a microfluidic context and (2) 3,5–diacetyl-1,4-dihydrolutidine (DDL) molecular sensing in low interrogation volumes. Part (2) was addressed in this paper by proposing, fabricating, and testing a fluorescence detection system based on an ultra-low light Complementary metal-oxide-semiconductor (CMOS) image sensor. Two three-layer fluidic cell configurations (quartz–SU-8–quartz and silicon–SU-8–quartz) were tested, with both possessing a 3.5 µL interrogation volume. Finally, the CMOS-based fluorescence system proved the capability to detect an initial 10 µg/L formaldehyde concentration fully derivatized into DDL for both the quartz and silicon fluidic cells, but with a higher signal-to-noise ratio (SNR) for the silicon fluidic cell (SNRsilicon=6.1) when compared to the quartz fluidic cell (SNRquartz=4.9). The signal intensity enhancement in the silicon fluidic cell was mainly due to the silicon absorption coefficient at the excitation wavelength, a(λabs=420 nm)=5×104 cm−1, which is approximately five times higher than the absorption coefficient at the fluorescence emission wavelength, a(λem=515 nm)=9.25×103 cm−1.

Mode of action-based risk assessment of genotoxic carcinogens

The risk assessment of chemical carcinogens is one major task in toxicology. Even though exposure has been mitigated effectively during the last decades, low levels of carcinogenic substances in food and at the workplace are still present and often not completely avoidable. The distinction between genotoxic and non-genotoxic carcinogens has traditionally been regarded as particularly relevant for risk assessment, with the assumption of the existence of no-effect concentrations (threshold levels) in case of the latter group. In contrast, genotoxic carcinogens, their metabolic precursors and DNA reactive metabolites are considered to represent risk factors at all concentrations since even one or a few DNA lesions may in principle result in mutations and, thus, increase tumour risk. Within the current document, an updated risk evaluation for genotoxic carcinogens is proposed, based on mechanistic knowledge regarding the substance (group) under investigation, and taking into account recent improvements in analytical techniques used to quantify DNA lesions and mutations as well as "omics" approaches. Furthermore, wherever possible and appropriate, special attention is given to the integration of background levels of the same or comparable DNA lesions. Within part A, fundamental considerations highlight the terms hazard and risk with respect to DNA reactivity of genotoxic agents, as compared to non-genotoxic agents. Also, current methodologies used in genetic toxicology as well as in dosimetry of exposure are described. Special focus is given on the elucidation of modes of action (MOA) and on the relation between DNA damage and cancer risk. Part B addresses specific examples of genotoxic carcinogens, including those humans are exposed to exogenously and endogenously, such as formaldehyde, acetaldehyde and the corresponding alcohols as well as some alkylating agents, ethylene oxide, and acrylamide, but also examples resulting from exogenous sources like aflatoxin B1, allylalkoxybenzenes, 2-amino-3,8-dimethylimidazo[4,5-f] quinoxaline (MeIQx), benzo[a]pyrene and pyrrolizidine alkaloids. Additionally, special attention is given to some carcinogenic metal compounds, which are considered indirect genotoxins, by accelerating mutagenicity via interactions with the cellular response to DNA damage even at low exposure conditions. Part C finally encompasses conclusions and perspectives, suggesting a refined strategy for the assessment of the carcinogenic risk associated with an exposure to genotoxic compounds and addressing research needs.

The in vitro antibacterial effect of permethrin and formaldehyde on Staphylococcus aureus

Antibiotic‐resistant strains of bacteria such as methicillin‐resistant Staphylococcus aureus are a threat to human health, and effective treatment options against them are needed. This study aimed to determine whether the insecticide permethrin was capable of inhibiting the growth of S. aureus or if some other component of a permethrin cream was responsible for a decrease in scabies associated bacterial infection previously observed. Ten S. aureus strains were grown in the presence of permethrin and formaldehyde both alone and in combination with percent inhibition determined by viable counts. Also, a time‐kill assay was conducted on S. aureus exposed to the same conditions. Finally, the morphology of S. aureus grown in the presence of permethrin was examined by scanning electron microscopy. Bacterial inhibition by permethrin ranged from 0% to 41% whereas inhibition by formaldehyde was 100%. The time‐kill curves of permethrin exposed cells were very similar to the positive growth control while the formaldehyde and combination exposure showed complete inhibition even at the 0‐hr time point. The scanning electron micrographs of permethrin grown S. aureus showed healthy cocci cells with no sign of cell damage. Our results show that permethrin is not capable of inhibiting the growth of bacteria enough for it to be termed bactericidal. Formaldehyde is a known antiseptic and therefore was responsible for the antibacterial effect observed after the use of permethrin cream.

Surface Plasmon-Enhanced Optical Formaldehyde Sensor Based on CdSe@ZnS Quantum Dots

For the first time, a reproducible surface plasmon-enhanced optical sensor for the detection of gaseous formaldehyde was proposed, which was fabricated by depositing a mixture of CdSe@ZnS quantum dots (QDs), fumed silica (FS), and gold nanoparticles (GNs) on the surface of a silica sphere array to meet the urgent requirement of a rapid, sensitive, and highly convenient formaldehyde detection method. Because of the spectral overlap between QDs and GNs, plasmon-enhanced fluorescence was observed in the film of QDs/FS/GNs. When exposed to formaldehyde molecules, the enhanced fluorescence was quenched linearly with the increase of formaldehyde concentration in the range of 0.5-2.0 ppm. The reason is attributed to the nonradiative electron transfer from QDs to the carbonyl of formaldehyde molecules with the assistance of amino groups. Our results demonstrate that the designed sensors are capable of detecting ultralow concentration gaseous formaldehyde at room temperature with a fast response-recovery time and excellent selectivity, stability, and reproducibility. This work provides a simple and low-cost approach for optical formaldehyde sensor fabrication and shows promising applications in environmental detection.

Cadaveric Models for Renal Transplant Surgery Education: a Comprehensive Review

PURPOSE OF REVIEW

To evaluate the utility of cadaveric models for kidney transplant (KT) surgery training.

RECENT FINDINGS

Medline® and PubMed® databases were searched for English and Spanish language articles published describing different learning models used in KT formation. We evaluated the use of cadavers preserved by Thiel's embalming method (TEM) as KT simulation models. Students were divided in groups of 4 people: four trainees mentored by an expert in KT surgery. Among the trainees were surgical residents and low-experience surgeons. A total of 39 TEM preserved bodies were used, of which 75 viable renal grafts were obtained. In each cadaver, two complete transplantation processes were performed, each consisting of en bloc nephrectomy with the trunk of aorta and inferior vena cava, bench surgery and perfusion with saline of the organ, and KT surgery. As with any surgical procedure, learning KT surgery is a stepwise process that requires years of dedication. The models available for the surgical simulation of KT surgery allow to practice and achieve dexterity in performing the procedure in a safe and reproducible way. Training on TEM-preserved corpses offers a highly realistic model for the surgical simulation of KT surgery.

Environmental and Health Effects of Ventilation in Subway Stations: A Literature Review

Environmental health in subway stations, a typical type of urban underground space, is becoming increasingly important. Ventilation is the principal measure for optimizing the complex physical environment in a subway station. This paper narratively reviews the environmental and health effects of subway ventilation and discusses the relevant engineering, environmental, and medical aspects in combination. Ventilation exerts a notable dual effect on environmental health in a subway station. On the one hand, ventilation controls temperature, humidity, and indoor air quality to ensure human comfort and health. On the other hand, ventilation also carries the potential risks of spreading air pollutants or fire smoke through the complex wind environment as well as produces continuous noise. Assessment and management of health risks associated with subway ventilation is essential to attain a healthy subway environment. This, however, requires exposure, threshold data, and thereby necessitates more research into long-term effects, and toxicity as well as epidemiological studies. Additionally, more research is needed to further examine the design and maintenance of ventilation systems. An understanding of the pathogenic mechanisms and aerodynamic characteristics of various pollutants can help formulate ventilation strategies to reduce pollutant concentrations. Moreover, current comprehensive underground space development affords a possibility for creating flexible spaces that optimize ventilation efficiency, acoustic comfort, and space perception.

Quantifying the sol-gel process and detecting toxic gas in an array of anchored microfluidic droplets

The detection of toxic gases is becoming an important element in tackling increased air pollution. This has led to the development of gas sensors based on porous solid materials, which are produced using sol-gel chemistry and functionalized to change their optical qualities when in contact with the gas. In this context it is interesting to explore how microfluidics can be used to miniaturize these sensors, to improve their sensitivity and dynamic range, or to multiplex many gas measurements on a single chip. In this article we show how the sol-gel process can be implemented using anchored droplet microfluidics. The sensor material is partitioned into droplets while in the sol phase and maintained using capillary anchors. The ability to hold the droplets in place first allows us to study the sol-gel process. We use an original rheology method, which consists of observing the flows within stationary droplets that are submitted to an external flow, to measure the gelation time of the droplets. These measurements show a gelation time that decreases from 50 minutes to below 10 minutes as the temperature increases from 20 to 50 °C. We also measure the shrinkage of individual gel beads after gelation and find that this syneresis process is nearly finished after about 12 hours, leading to a final bead size that is 50% smaller than the initial droplet. Finally, we show that the beads can be functionalized and used to detect the presence of formaldehyde. These results first provide a new way to observe the physics of the sol-gel process in a well-controlled and quantitative fashion. Moreover they highlight how the coupling of microfluidics and sol-gel chemistry can be used to detect toxic gases, in view of answering the challenges surrounding gas detection in real-world settings.

Visible Light Photodegradation of Formaldehyde over TiO2 Nanotubes Synthesized via Electrochemical Anodization of Titanium Foil

In this study, a series of TiO₂ nanotubes (NTs) were synthesized employing electrochemical anodization of titanium foil in an ionic liquid solution containing a mixture of glycerol and choline chloride, acting as electrolyte. The as-synthesized TiO₂ NTs were calcined at 350, 450, or 550 °C for a 2 h duration to investigate the influence of calcination temperature on NTs formation, morphology, surface properties, crystallinity, and subsequent photocatalytic activity for visible light photodegradation of gaseous formaldehyde (HCHO). Results showed that the calcination temperature has a significant effect on the structure and coverage of TiO₂ NTs on the surface. Freshly synthesized TiO₂ NTs showed better-ordered structure compared to calcined samples. There was significant pore rupture with increasing calcination temperature. The transformation from anatase to rutile phase appeared after calcination at 450 °C and the weight fraction of the rutile phase increased from 19% to 36% upon increasing the calcination temperature to 550 °C. The band gaps of the TiO₂ NTs were in the range from 2.80 to 2.74 eV, shifting the active region of the materials to visible light. The presence of mixed anatase–rutile TiO₂ phases in the sample calcined at 450 °C showed enhanced photoactivity, which was confirmed by the 21.56 mg∙L⁻¹∙g⁻¹ removal of gaseous formaldehyde under 120 min of visible light irradiation and displayed enhanced quantum yield, ∅_HCHO of 17%.

TD-DFT insights into the sensing potential of the luminescent covalent organic framework for indoor pollutant formaldehyde

This paper investigates the sensitivity of the luminescent thieno[2,3-b]thiophene-based covalent organic framework (TT-COF) towards the formaldehyde using the density functional theory and time-dependent method. The hydrogen bonding dynamics is explored by comparison of geometries, electronic transition energies, binding energies, UV-vis, and infrared spectra. Frontier molecular orbitals examination, natural population analysis, and plotted electron density difference map describe the quenching process explicitly via electron density distribution. The MOMAP program illuminates the quenching owing to TT-COF-HCHO complex radiative rate constant. Furthermore, the S1-T1 energy gap describes the facilitation of the luminescence quenching through the intersystem crossing. Above all results elaborate the TT-COF's potential to detect the formaldehyde.

Usefulness of N-vinyl-2-pyrrolidone Embalming for Endoscopic Transnasal Skull Base Approach in Cadaver Dissection

Formalin or formaldehyde is commonly used for cadaver fixation, which is, however, not suitable for endoscopic transnasal skull base approach because of consequent hardening of the soft tissue. Several alternatives have been reported, but each of them also has some limitations. We applied a novel fixation method using N-vinyl-2-pyrrolidone (NVP), a precursor of the water-soluble macromolecular polymer, for endoscopic transnasal skull base approach in six donated cadaver specimens. In four cadavers, elasticity of the soft tissue in the nasal cavity was almost similar to that of living tissue, and a surgical approach similar to the real surgical field was possible. However, the soft tissue was moderately stiffer than living tissue in two specimens so that surgical manipulation was hindered to some extent while NVP concentration was 10% in all the cadavers. Since the brain tissue was too soft and pliable for surgical manipulation in NVP, more careful surgical manipulation than real surgical field was mandatory in order to prevent damage in the brain tissue. Therefore, this concentration of NVP was considered to be appropriate. In conclusion, NVP embalming was effective for endoscopic transnasal skull base approach in cadaver dissection, providing environment similar to the real surgical field.

Formaldehyde as an alternative to antibiotics for treatment of refractory impetigo and other infectious skin diseases

Introduction: Antibiotic-resistant strains of bacteria are an increasing problem in hospitals and in the community. This has resulted in bacterial infections such as impetigo becoming difficult to treat. Alternative treatment options are needed. Areas covered: In this paper, a past study that assessed the health burden of scabies in North Queensland is described and from it, the potential for formaldehyde as an alternative antimicrobial treatment is discussed. In doing so, antibiotic resistance, impetigo, permethrin, and formaldehyde are introduced and the current understanding and limitations of the effects of formaldehyde on humans are outlined. The limited cases of formaldehyde resistance in bacteria are also discussed. Expert opinion: Formaldehyde is currently used as a preservative in cosmetics and medicinal creams due to its antibacterial activity. It, therefore, has the potential to be used as an alternative antibacterial treatment for infections with antibiotic-resistant bacteria. The harmful side effects of airborne formaldehyde and exposure in allergic individuals have been extensively studied. Significantly less research has been conducted on formaldehyde skin contact in healthy individuals. If formaldehyde is safe for topical use in humans, it has the potential to assist with combating antibiotic resistance.

mHealth: Indoor Environmental Quality Measuring System for Enhanced Health and Well-Being Based on Internet of Things

Mobile health research field aims to provide access to healthcare anytime and anywhere through mobile computing technologies while using a cost-effective approach. Mobile health is closely related to ambient assisted living as both research fields address independence in elderly adults. Aging has become a relevant challenge, as it is anticipated that 20% of world population will be aged 60 years and older in 2050. Most people spend more than 90% of their time indoors, therefore the indoor environmental quality has a relevant impact on occupant’s health and well-being. We intended to provide real-time indoor quality monitoring for enhanced living environments and occupational health. This paper presents the AirPlus real-time indoor environmental quality monitoring system, which incorporates several advantages when compared to other systems, such as scalability, flexibility, modularity, easy installation, and configuration, as well as mobile computing software for data consulting and notifications. The results that were obtained are promising and present a significant contribution to the monitoring solutions available in the literature. AirPlus provides a rich dataset to plan interventions for enhanced indoor quality, but also to support clinical diagnostics and correlate occupant’s health problems with their living environment conditions.

Sub-ppm Formaldehyde Detection by n-n TiO2@SnO2 Nanocomposites

Formaldehyde (HCHO) is an important indicator of indoor air quality and one of the markers for detecting lung cancer. Both medical and air quality applications require the detection of formaldehyde in the sub-ppm range. Nanocomposites SnO2/TiO2 are promising candidates for HCHO detection, both in dark conditions and under UV illumination. Nanocomposites TiO2@SnO2 were synthesized by ALD method using nanocrystalline SnO2 powder as a substrate for TiO2 layer growth. The microstructure and composition of the samples were characterized by ICP-MS, TEM, XRD and Raman spectroscopy methods. The active surface sites were investigated using FTIR and TPR-H2 methods. The mechanism of formaldehyde oxidation on the surface of semiconductor oxides was studied by in situ DRIFTS method. The sensor properties of nanocrystalline SnO2 and TiO2@SnO2 nanocomposites toward formaldehyde (0.06-0.6 ppm) were studied by in situ electrical conductivity measurements in dark conditions and under periodic UV illumination at 50-300 °C. Nanocomposites TiO2@SnO2 exhibit a higher sensor signal than SnO2 and a decrease in the optimal measurement temperature by 50 °C. This result is explained based on the model considering the formation of n-n heterocontact at the SnO2/TiO2 interface. UV illumination leads to a decrease in sensor response compared with that obtained in dark conditions because of the photodesorption of oxygen involved in the oxidation of formaldehyde.

Monitored Indoor Environmental Quality of a Mass Timber Office Building: A Case Study

A broad range of building performance monitoring, sampling, and evaluation was conducted periodically after construction and spanning more than a year, for an occupied office building constructed using mass timber elements such as cross-laminated timber (CLT) floor and roof panels, as well as glue-laminated timber (GLT) beams and columns. This case study contributes research on monitoring indoor environmental quality in buildings, describing one of the few studies of an occupied mass timber building, and analyzing data in three areas that impact occupant experience: indoor air quality, bacterial community composition, and floor vibration. As a whole, the building was found to perform well. Volatile organic compounds (VOCs), including formaldehyde, were analyzed using multiple methods. Formaldehyde was found to be present in the building, though levels were below most recommended exposure limits. The source of formaldehyde was not able to be identified in this study. The richness of the bacterial community was affected by the height of sampling with respect to the floor, and richness and composition was affected by the location within the building. Floor vibration was observed to be below recognized human comfort thresholds.

Considerations for refining the risk assessment process for formaldehyde: Results from an interdisciplinary workshop

Anticipating the need to evaluate and integrate scientific evidence to inform new risk assessments or to update existing risk assessments, the Formaldehyde Panel of the American Chemistry Council (ACC), in collaboration with the University of North Carolina, convened a workshop: "Understanding Potential Human Health Cancer Risk - From Data Integration to Risk Evaluation" in October 2017. Twenty-four (24) invited-experts participated with expertise in epidemiology, toxicology, science integration and risk evaluation. Including members of the organizing committee, there were 29 participants. The meeting included eleven presentations encompassing an introduction and three sessions: (1) "integrating the formaldehyde science on nasal/nasopharyngeal carcinogenicity and potential for causality"; (2) "integrating the formaldehyde science on lymphohematopoietic cancer and potential for causality; and, (3) "formaldehyde research-data suitable for risk assessment". Here we describe key points from the presentations on epidemiology, toxicology and mechanistic studies that should inform decisions about the potential carcinogenicity of formaldehyde in humans and the discussions about approaches for structuring an integrated, comprehensive risk assessment for formaldehyde. We also note challenges expected when attempting to reconcile divergent results observed from research conducted within and across different scientific disciplines - especially toxicology and epidemiology - and in integrating diverse, multi-disciplinary mechanistic evidence.

Assessment of indirect inhalation exposure to formaldehyde evaporated from water

Volatilization volumes and health risks associated with indirect inhalation exposure to formaldehyde evaporated from water have not been investigated quantitatively. We experimentally investigated formaldehyde volatility, compared with chloroform volatility, predicted formaldehyde inhalation exposure concentrations in Japanese bathrooms, and then re-evaluated drinking water quality standards. Although the Henry's law constant of formaldehyde is 1/10⁴ that of chloroform, with a 30-min exposure period, the formaldehyde non-equilibrium partition coefficient (K'_d) was 1/500th the chloroform value because of formaldehyde's faster volatilization rate. We used this ratio to estimate the cumulative probability distribution of formaldehyde concentrations in bathroom air. For a formaldehyde concentration in water of ≤2.6 mg/L-water (WHO tolerable concentration), the probability that the incremental formaldehyde concentration due to volatilization would exceed 100 μg/m³-air (WHO indoor air quality guideline) was low. However, major sources of formaldehyde in indoor air are building materials and furniture. We therefore calculated the allowable concentration in water by allocating a small percentage of the indoor air guideline value to indirect inhalation exposure via volatilization from tap water. With an allocation factor of 20% (10%), the allowable concentration was 0.52 (0.26) mg/L-water. These concentrations are similar to the Health Canada guideline concentration but they are 3-6 times the Japanese water quality standard.

An overview of health hazards of volatile organic compounds regulated as indoor air pollutants

Indoor air quality (IAQ) standards and guidelines for volatile organic compounds (VOCs) have been stipulated by various national and international agencies. The main purpose of this paper is to establish an overview of indoor VOCs regarding their impacts on human health. Herein, 13 VOCs were designated as indoor air pollutants (IAPs) in the IAQ standards and guidelines. They were further grouped into four types: nonchlorinated aromatic compounds, chlorinated aromatic compounds, chlorinated aliphatic compounds and aldehydes. For this purpose, the present study discusses the criteria for designating VOCs, and summarizes their main sources in indoor environments. Because the occupational exposure limit (OEL) in workplaces has often used as a preliminary basis for establishing acceptable health-based IAQ guidelines in buildings and residences, this paper thus reviews the OEL values, especially in the American Conference of Governmental Industrial Hygienists (ACGIH)-threshold limit value (TLV). In addition, this paper also reviews the information about the classification of carcinogenicity in human by the international agencies for these VOCs. It shows that human tissues, including kidney, liver, leukemia, nasal cavity, paranasal sinus, liver and bile duct, could be more involved in the development of cancers or tumors when people are exposed to these VOCs through inhalation route in buildings over a long period of time.

Evaluation of inhaled low-dose formaldehyde-induced DNA adducts and DNA-protein cross-links by liquid chromatography-tandem mass spectrometry

As a widespread industrial chemical, formaldehyde carcinogenicity has been highly controversial. Meanwhile, formaldehyde is an essential metabolite in all living cells. Previously, we have demonstrated exogenous formaldehyde causes DNA adducts in a nonlinear manner between 0.7 and 15.2 ppm using [¹³CD₂]-formaldehyde for exposure coupled with the use of sensitive mass spectrometry. However, the responses from exposure to low doses of formaldehyde are still unknown. In this study, rats were exposed to 1, 30, and 300 ppb [¹³CD₂]-formaldehyde for 28 days (6 h/day) by nose-only inhalation, followed by measuring DNA mono-adduct (N²-HOMe-dG) and DNA-protein crosslinks (dG-Me-Cys) as formaldehyde specific biomarkers. Both exogenous and endogenous DNA mono-adducts and dG-Me-Cys were examined with ultrasensitive nano-liquid chromatography-tandem mass spectrometry. Our data clearly show that endogenous adducts are present in all tissues analyzed, but exogenous adducts were not detectable in any tissue samples, including the most susceptible nasal epithelium. Moreover, formaldehyde exposure at 1, 30 and 300 ppb did not alter the levels of endogenous formaldehyde-induced DNA adducts or DNA-protein crosslinks. The novel findings from this study provide new data for risk assessment of exposure to low doses of formaldehyde.

Tailoring energy level and surface basicity of metal oxide semiconductors by rare-earth incorporation for high-performance formaldehyde detection

The elevated Fermi level and increased surface basicity of 5Y-In₂O₃ led to the improvement of response and selectivity towards formaldehyde.

Roles of reactive oxygen species and antioxidant enzymes on formaldehyde removal from air by plants

The roles of enzymatic reactions and redox reactions caused by reactive oxygen species (ROS) in formaldehyde metabolism in tomatoes and wheat seedlings and the changes in peroxidase (POD) and catalase (CAT) activities in plants were investigated. Differences in the breakdown of added formaldehyde between fresh and boiled plant extracts were determined to calculate the contributions of different removal mechanisms. Two plant seedlings efficiently removed formaldehyde from air when its level varied from 0.65 to 1.91 mg m^-3; meanwhile, the maximum rate at which tomato seedlings transported formaldehyde from air to the rhizosphere solution reached 182.26 µg h^-1 kg^-1 FW (fresh weight). Metabolism in plants was mainly responsible for the formaldehyde dissipation. The enzymatic contribution to formaldehyde dissipation decreased with increasing shoot exposure time or air formaldehyde level, while the redox contribution increased in importance because of an increasing level of ROS. The different enzymatic antioxidant activities of plants resulted in different levels of ROS and hence different tolerance and removal efficiencies toward formaldehyde. The self-enhancing ability of plants to remove formaldehyde via redox reactions suggested that the formaldehyde removal efficiency could be enhanced by plant adaptation to environmental stress.

Aggregation-Induced Emission-Based Fluorescence Probe for Fast and Sensitive Imaging of Formaldehyde in Living Cells

Formaldehyde (FA), as a reactive carbonyl species and signaling molecule, plays an important role in living systems. Here, an FA-responsive probe with fast response and great selectivity is designed based on aggregation-induced emission. The probe is prepared by functionalizing tetraphenylethene (TPE) with two amine groups. FA is detected based on the solubility differences between the amine-functionalized TPE and the corresponding Schiff bases after reaction with FA. The probe exhibits a limit of detection of 40 nM and a response time of ∼90 s. Furthermore, its ability to detect both endogenous and exogenous FA is demonstrated in living cells with high specificity. Moreover, the probe is also introduced to image endogenous FA in real time with fast response. These results suggest that our probe holds great potential for tracking FA in living systems under various physiological conditions as well as related biomedical applications.

Changes in Work Practices for Safe Use of Formaldehyde in a University-Based Anatomy Teaching and Research Facility

Anatomy teaching and research relies on the use of formaldehyde (FA) as a preservation agent for human and animal tissues. Due to the recent classification of FA as a carcinogen, university hospitals are facing a challenge to (further) reduce exposure to FA. The aim of this study was to reduce exposure to FA in the anatomy teaching and research facility. Workers participated in the development of improved work practices, both technical and organizational solutions. Over a period of 6 years mitigating measures were introduced, including improvement of a down-flow ventilation system, introduction of local exhaust ventilation, collection of drain liquid from displayed specimens in closed containers and leak prevention. Furthermore, some organizational changes were made to reduce the number of FA peak exposures. Stationary and personal air sampling was performed in three different campaigns to assess the effect of these new work practices on inhalation exposure to FA. Samples were collected over 8 h (full shift) and 15 min (task-based) to support mitigation of exposure and improvement of work practices. Air was collected on an adsorbent coated with 2,4-dinitrophenylhydrazine (DNPH) and analyzed by HPLC-UV. Geometric mean (GM) concentrations of FA in the breathing zone over a work-shift were 123 µg/m³ in 2012 and 114 µg/m³ in 2014, exceeding the workplace standard of 150 µg/m³ (8 h time-weighted average, TWA) on 46% of the workdays in 2012 and 38% of the workdays in 2014. This exposure was reduced to an average of 28.8 µg/m³ in 2017 with an estimated probability of exceeding the OEL of 0.6%. Task-based measurements resulted in a mean peak exposures of 291 µg/m³ in 2012 (n = 19) and a mean of 272 µg/m³ in 2014 (n = 21), occasionally exceeding the standard of 500 µg/m³ (15 min TWA), and were reduced to a mean of 88.7 µg/m³ in 2017 (n = 12) with an estimated probability of exceeding the OEL of 1.6%.

Potential Exposure and Cancer Risk from Formaldehyde Emissions from Installed Chinese Manufactured Laminate Flooring

Lumber Liquidators (LL) Chinese-manufactured laminate flooring (CLF) has been installed in >400,000 U.S. homes over the last decade. To characterize potential associated formaldehyde exposures and cancer risks, chamber emissions data were collected from 399 new LL CLF, and from LL CLF installed in 899 homes in which measured aggregate indoor formaldehyde concentrations exceeded 100 μg/m³ from a total of 17,867 homes screened. Data from both sources were combined to characterize LL CLF flooring-associated formaldehyde emissions from new boards and installed boards. New flooring had an average (±SD) emission rate of 61.3 ± 52.1 μg/m² -hour; >one-year installed boards had ∼threefold lower emission rates. Estimated emission rates for the 899 homes and corresponding data from questionnaires were used as inputs to a single-compartment, steady-state mass-balance model to estimate corresponding residence-specific TWA formaldehyde concentrations and potential resident exposures. Only ∼0.7% of those homes had estimated acute formaldehyde concentrations >100 μg/m³ immediately after LL CLF installation. The TWA daily formaldehyde inhalation exposure within the 899 homes was estimated to be 17 μg/day using California Proposition 65 default methods to extrapolate cancer risk (below the regulation "no significant risk level" of 40 μg/day). Using a U.S. Environmental Protection Agency linear cancer risk model, 50th and 95th percentile values of expected lifetime cancer risk for residents of these homes were estimated to be 0.33 and 1.2 per 100,000 exposed, respectively. Based on more recent data and verified nonlinear cancer risk assessment models, LL CLF formaldehyde emissions pose virtually no cancer risk to affected consumers.

An Integrated Air Monitoring Approach for Assessment of Formaldehyde in the Workplace

The aim of this study is to validate an integrated air monitoring approach for assessing airborne formaldehyde (FA) in the workplace. An active sampling by silica gel impregnated with 2,4-dinitrophenylhydrazine, a passive solid phase microextraction technique using O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine as on-fiber derivatization reagent, an electrochemical direct-reading monitor, and an enzyme-based badge were evaluated and tested over a range of 0.020–5.12 ppm, using dynamically generated FA air concentrations. Simple linear regression analysis showed the four methods were suitable for evaluating airborne FA. Personal and area samplings in 12 anatomy pathology departments showed that the international occupational exposure limits in the GESTIS database were frequently exceeded. This monitoring approach would allow a fast, easy-to-use, and economical evaluation of both current work practices and eventual changes made to reduce FA vapor concentrations.