Effect of CuO nanoparticles on the production and composition of extracellular polymeric substances and physicochemical stability of activated sludge flocs

Impact of copper oxide nanoparticles (CuO NPs) exposure on embryo development and expression of genes related to the innate immune system of zebrafish (Danio rerio)

CuO NPs are nanomaterials with catalytic activity and unique thermo-physical properties used in different fields such as sensors, catalysts, surfactants, batteries, antimicrobials and solar energy transformations. Because of its wide field of use, these nanoparticles accumulate in the aquatic environment and thus lead to toxic effects on aquatic organisms. The toxicological findings about CuO NPs are controversial and these effects of CuO NPs on aquatic organisms have not been elucidated in detail. Therefore, the aim of this study was to investigate the toxic effect of CuO NPs on zebrafish embryos using different parameters including molecular and morphologic. For this purpose, zebrafish embryos at 4 h after post fertilization (hpf) were exposed to different concentrations of CuO NPs (0.5, 1, 1.5 mg/L) until 96 hpf. Mortality, hatching, heartbeat, malformation rates were examined during the exposure period. In addition, Raman spectroscopy was used to determine whether CuO NPs entered into the tissues of zebrafish larvae or not. Moreover, the alterations in the expression of genes related to the antioxidant system and innate immune system were examined in the embryos exposed to CuO NPs during 96 h. The results showed that CuO NPs was not able to enter into the zebrafish embryos/larvae tissues but caused an increased the mortality rate, a delayed hatching, and a decreased heartbeat rate. Moreover, CuO NPs caused several types of abnormalities such as head and tail malformations, vertebral deformities, yolk sac edema, and pericardial edema. RT-PCR results showed that the transcription of mtf-1, hsp70, nfkb and il-1β, tlr-4, tlr-22, trf, cebp was changed by the application of CuO NPs. In conclusion, short-term exposure to CuO NPs has toxic effects on the development of zebrafish embryos.

Effects of titanium dioxide nanoparticles on algal and bacterial communities in periphytic biofilms

The widespread application of commercial TiO₂ NPs inevitably leads to their release into environmental waters through various ways. TiO₂ NPs released into water might be absorbed by and react with periphytic biofilms, which are a kind of aquatic environmental media of important ecological significance, and influence the physiological activity and ecological function of periphytic biofilms. This study investigated the effects of exposure to 1 mg/L and 5 mg/L of TiO₂ NPs on periphytic biofilms cultured indoors. After a 10-day exposure to TiO₂ NPs, the growth (measured by chlorophyll-a content) of microalgal community was inhibited greatly (more than 60%); however, the primary production (indicated by quantum yield) of periphytic biofilms maintained changeless. As for bacteria, TiO₂ NP-exposure increased the bacterial diversity and altered the composition structure. Significant changes were observed in the bacterial communities at the class level, mainly including Alphaproteobacteria, Gammaproteobacteria, Cytophagia, Flavobacteriia, Sphingobacteriia, Synechococcophycideae and Oscillatoriophycideae. The enhancement of metabolic activities (the production of extracellular polymeric substances, especially proteins content increased by 48.51%) of periphytic biofilms was a resistance mechanism to toxicity of NPs. As for extracellular enzyme activities of periphytic biofilms, alkaline phosphatase activity was inhibited (22.43%) after exposed to 5 mg/L of TiO₂ NPs, which posed a threat to phosphorus metabolism of periphytic biofilms. Overall, this study demonstrated that 1 mg/L and 5 mg/L of TiO₂ NPs negatively influenced physiological activities and ecological functions of periphytic biofilms, highlighting that the ecological risks of TiO₂ NPs should be paid attention to.

Potential effects of suspended TiO2 nanoparticles on activated sludge floc properties in membrane bioreactors

With the rapid development and application of consumer products containing nanoparticles (NPs), especially titanium dioxide (TiO₂) NPs, the potential effects of suspended NPs on wastewater treatment has been a concern over the recent years. This study investigated the potential effects of suspended TiO₂ NPs on activated sludge flocculation properties in a membrane bioreactor (MBR). Results showed that suspended TiO₂ NPs inhibited the viability of activated sludge flocs, and led to bacterial protein secretion for bacterial protection, causing an overall protein increase of soluble microbial products. Suspended TiO₂ NPs also destabilized the activated sludge floc structure and reduced flocculation capacity of flocs, causing an over production of organic matter and resulting in a floc size decrease of over 50%. Suspended TiO₂ NPs also caused a change in the phylogenetic distribution of bacterial community. Whereby, the dominant species in activated sludge was replaced from Comamonadaceae to Thiotrichaceae in 50 mg/L suspended TiO₂ NPs.

Long-term impacts of graphene oxide and Ag nanoparticles on anammox process: Performance, microbial community and toxic mechanism

The increasing application of engineered nanoparticles (NPs) has posed an emerging challenge to constructed wetland wastewater treatment. The performance, microbial community and toxic mechanism of anammox-based unplanted subsurface-flow constructed wetlands (USFCWs) were investigated under the long-term exposure of different graphene oxides (GOs) and Ag NP concentrations. Results showed that the addition of GO could promote TN removal, manifesting as function anammox bacteria C. Anammoxoglobus having a relative high abundance, for GO did not cause significant damage to the cell integrity though there was an increase in ROS concentrations. TN removal would not be obviously affected under exposure of 1 mg/L Ag NPs, for the function gene related to cell biogenesis and repair was up-regulated; while the addition of 10 mg/L Ag NPs would have an inhibiting effect on TN removal in the USFCWs, for the disappearance of some species having anammox ability. Key enzymes of anammox process (NIR and HDH) decreased to some extent under GO and Ag NP exposure, and function gene of defense mechanisms had an increase trend in samples.

The Removal of CuO Nanoparticles from Water by Conventional Treatment C/F/S: The Effect of pH and Natural Organic Matter

The increased use of engineered nanoparticles (ENPs), such as copper oxide nanoparticles (CuO NPs), in commercial products and applications raises concern regarding their possible release into freshwater sources. Therefore, their removal from water is important to eliminate adverse environmental and human health effects. In this study, the effects of pH and natural organic matter (NOM), i.e., humic acid (HA) and salicylic acid (SA) on the removal of CuO NPs by coagulation/flocculation/sedimentation (C/F/S) were evaluated. The results indicated that pH significantly affects the coagulation efficiency, where 10–60% CuO NPs removal was achieved under extreme acidic/alkaline conditions. However, at neutral pH, removal of up to 90% was observed with a lower ferric chloride (FC) dosage (0.2 mM). The coagulation efficiency and mechanism were strongly affected by the type of Fe species present in the aqueous phase, which is mainly controlled by pH. Higher concentrations of both HA and SA decrease the CuO NPs agglomeration rate, and thereby improve the colloidal stability due to the NOM molecules adsorbed onto the NPs surface. The presence of hydrophobic HA needs a higher FC dosage of 0.5–0.8 mM than a dosage of hydrophilic SA of 0.25–0.35 mM, to obtain a similar CuO coagulation efficiency. Moreover, higher removals of dissolved organic carbon (DOC) and UV₂₅₄ were observed more in hydrophobic NOM than in hydrophilic. The results of the Fourier transform infrared (FT-IR) analysis of FC composite flocs confirm that the charge neutralization and enmeshment of coagulant might be a possible removal mechanism. The findings of the current study may provide critical information in the prediction of the fate, mobility, and removal of CuO NPs during C/F/S in water treatment.

A review on the interactions between engineered nanoparticles with extracellular and intracellular polymeric substances from wastewater treatment aggregates

Engineered nanoparticles (ENPs) will inevitably enter wastewater treatment plants (WWTPs) due to their widespread application; thus, it is necessary to study the migration and transformation of nanoparticles in sewage treatment systems. Extracellular polymeric substances (EPSs) such as polysaccharides, proteins, nucleic acids, humic acids and other polymers are polymers released by microorganisms under certain conditions. Intracellular polymeric substances (IPSs) are microbial substances contained in the body with compositions similar to those of extracellular polymers. In this review, we summarize the characteristics of EPSs and IPSs from sewage-collecting microbial aggregates containing pure bacteria, activated sludge, granular sludge and biofilms. We also further investigate the dissolution, adsorption, aggregation, deposition, oxidation and other chemical transformation processes of nanoparticles, such as metals, metal oxides, and nonmetallic oxides. In particular, the review deeply analyzes the migration and transformation mechanisms of nanoparticles in EPS and IPS matrices, including physical, chemical, biological interactions mechanisms. Moreover, various factors, such as ionic strength, ionic valence, pH, light, oxidation-reduction potential and dissolved oxygen, influencing the interaction mechanisms are discussed. In recent years, studies on the interactions between EPSs/IPSs and nanoparticles have gradually increased, but the mechanisms of these interactions are seldom explored. Therefore, developing a systematic understanding of the migration and transformation mechanisms of ENPs is significant.

Low concentrations of copper oxide nanoparticles alter microbial community structure and function of sediment biofilms

In this study, we investigated the effects of copper oxide (CuO) NPs on freshwater sediment biofilms in terms of the functional properties and microbial community structure. Biofilms were incubated in microcosms and CuO NPs (1 mg/L uncoated and humic-acid-coated) were exposed with Cu²⁺ (Cu(NO₃)₂) as the positive control. As determined from DO (dissolved oxygen) microelectrodes measurements, a high-DO region emerged inside the biofilms after 5-day exposure to CuO NPs compared with those before NP additions, which suggested CuO NPs inhibit the oxygen respiration activity. These results were consistent with the decreased heterotrophic respiration. CuO NPs significantly altered the bacterial community composition and decreased the abundances of Anaerolineaceae, Acidobacteria, Aminicenantes, and Anaerolinea. Functional analysis from PICRUSt (Phylogenetic Investigation of Communities by Reconstruction of Unobserved States)-predicted metagenomes indicated that bacterial genera depleted by CuO NP treatments were related to carbohydrate and glycan biosynthesis and metabolism, and biosynthesis of other secondary metabolites. These functional profiles combined with the decreased activities of extracellular enzymes, β-glucosidase (GLU) and l-leucine aminopeptidase (LAP), suggested that the introduction of CuO NPs exhibit negative effects on the biogeochemical processes and the cycling of carbon and nitrogen in biofilm systems. Whereas these toxic effects of CuO NPs could be mitigated when the aquatic environment is enriched with natural organic matters such as humic acid.

Diminished inhibitory impact of ZnO nanoparticles on anaerobic fermentation by the presence of TiO2 nanoparticles: Phenomenon and mechanism

Engineered nanoparticle materials (ENMs) are widely and increasingly produced and employed in many sectors. The use of diverse ENMs potentially leads to the release of multiple ENMs into the environment. These ENMs after discharge will be end in wastewater treatment plant and present in sludge. This work investigated the effect of multi-ENMs systems of ZnO and TiO₂ on sludge anaerobic fermentation and the related toxicity mechanism. Results revealed that the toxicity of ZnO ENMs on anaerobic fermentation was reduced in the presence of TiO₂ ENMs. Investigation on the change of free Zn²⁺ and reactive oxygen species (OH and H₂O₂) suggested that both of free Zn²⁺ and ROS contributed to the toxicity mechanism. Zn²⁺ decrease was the main reason for the reduced toxicity in multi-ENMs systems. ROS mainly led to the reduction of cell viability in anaerobic fermentation systems. The presence of TiO₂ in the multi-ENMs systems promoted the recovery of enzyme activity, cell viability and bacteria abundance.

Adsorption mechanism of ZnO and CuO nanoparticles on two typical sludge EPS: Effect of nanoparticle diameter and fractional EPS polarity on binding

Worldwide application of nanotechnology has led to an increasingly release of nanoparticles in wastewater treatment systems, and thus into sewage sludge, which potentially impairs the disposal of sewage sludge. Here, the binding process, adsorption characteristics, and the contribution of fractional polarity of extracellular polymeric substances (EPS) of anaerobic granular sludge (AGS) and activated sludge (AS) to the nano-ZnO and nano-CuO adsorption were investigated. Briefly, CuO-NPs can be more efficiently adsorbed by the EPS-AGS than that of ZnO-NPs (1.31 ± 0.08 g/g VS vs 0.53 ± 0.04 g/g VS), and a smaller diameter of nanoparticles benefited the adsorption processes. Hydrophobic EPS (HPO-A and HPO-N) within these two sludge were more effective in removing nano-CuO and ZnO than were the hydrophilic fraction. For example, HPO-A and HPO-N obtained from AGS showed a relatively higher adsorption abilities (in g/g VS) of 2.09 ± 0.12 and 2.27 ± 0.14, respectively, for nano-CuO, much higher than HPI (0.76 ± 0.04 g/g VS). Structural variations of the EPS before and after nanoparticles sorption were evaluated via the analysis of infrared spectroscopy, which showed that the functional structures of hydroxyl, amino, carboxyl, amide groups and C-O-C groups played a major role in nanoparticles binding/removal. Sorption process of nano-CuO and nano-ZnO on unfractionated EPS well fitted by Langmuir isotherm, as well as a pseudo second-order kinetic model. However, adsorption process of HPO-A can be better simulated by Freundlich equation.

Enhanced organics and Cu2+ removal in electroplating wastewater by bioaugmentation

With the improvement of electroplating process and products requirement, refractory organics, heavy metals or even heavy metal nanoparticles (NP) exist simultaneously in electroplating wastewater inevitably, makes electroplating wastewater treatment effluent difficult to meet the discharge standard. In order to improve the organics removal under the exposure of CuO NP, strains (designated as L1-L5) that have both organics degradation and Cu²⁺ tolerance capacities were isolated and employed in the electroplating wastewater bioaugmentation treatment using a hydrolytic/anoxic/oxic-membrane bioreactor. The Cu²⁺ adsorption process followed pseudo-second order kinetics and the isotherms fit well to Langmuir isotherm model. L2, L3 and L4 showed higher Cu²⁺ adsorption capacity than that of L1 and L5. Under the optimal condition, the maximum Cu²⁺ adsorption capacity of L2, L3 and L4 was 34.15, 45.68 and 26.72 mg g^-1, respectively. Their average COD removal efficiency achieved 65.7 ± 10.9%, 61.5 ± 6.7% and 71.6 ± 6.0%, respectively. The three isolates were used to construct consortia with the inoculum concentration of 400 mg L^-1. One-time and repeated inoculations were evaluated to find the applicable strategy. Repeated inoculation resulted in a better COD and Cu removal performance (76.2 ± 2.6% and 98.5 ± 0.3%, respectively) than those of one-time inoculation (69.0 ± 2.0% and 98.0 ± 0.3%, respectively). The most functionally stable, balanced and resistant bacterial community was formed in the one-time inoculation system while for fungal community it was formed in the repeated inoculation system.

Aggregation, sedimentation, and dissolution of CuO and ZnO nanoparticles in five waters

With the accelerated application of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles (NPs) in commercial products, concerns about the potential impacts on the environment have been growing. Environmental behaviors of NPs are expected to significantly influence their fate and ecological risk in the aquatic environment. In this study, the environmental behaviors of two metallic NPs (CuO and ZnO NPs), including aggregation, sedimentation, and dissolution, were systematically evaluated in five representative waters (pool water, lake water, rainwater, tap water, and wastewater) with varying properties. Remarkable aggregation, sedimentation, and dissolution were observed for both metallic NPs, among which ZnO NPs exhibited greater influence. CuO (ZnO) NPs aggregated to 400 (500) nm, 500 (900) nm, and 800 (1500) nm in lake water, wastewater, and tap water, respectively. The sedimentation rates of CuO and ZnO NPs in the five waters were ranked as tap water > wastewater > lake water > pool water > rainwater. The dissolution of CuO and ZnO NPs in waters follows a first-order reaction rate model and is affected by ionic type, ionic strength (IS), and NOM (natural organic matter) concentrations. Redundancy analysis (RDA) indicated that the aggregation and sedimentation of NPs have a strong correlation, insofar as the sedimentation rates increase with increasing aggregation rates. The aggregation and dissolution of NPs have a negative correlation, insofar as the dissolution rates reduce with increasing aggregation rates. The aggregation, sedimentation, and dissolution of NPs can be influenced by ionic types, IS, and TOC in waters, among which, TOC may the dominant factor.

Influence of CeO2 nanoparticles on viscoelastic properties of sludge: Role of extracellular polymeric substances

Cerium oxide nanoparticles (CeO₂ NPs) affected the production of extracellular polymeric substances (EPSs), and thus might bring challenges for sludge pumping and mixing. In the present study, we investigated the rheological behavior of sludge before and after extraction of different EPSs fractions under various CeO₂ NPs concentrations. It was found that the removal of loosely bound EPSs (LB-EPSs) could affect the shear stress (τ) and apparent viscosity (η), and the changes were dependent on CeO₂ NPs concentrations. The removal of tightly bound EPSs (TB-EPSs) either with or without the addition of CeO₂ NPs significantly decreased the yield stress (τ_y) and the limiting viscosity (η_∞). Furthermore, the dynamic (strain, frequency and time) sweep measurements proved that the storage modulus (G') decreased after the extraction of TB-EPSs, indicating the weakened elastic and solid-like properties. The fluctuated content of polysaccharide in LB-EPSs and the increased amount of protein in TB-EPSs were likely to contribute to the variation of viscoelastic behaviors after the removal of LB-EPSs and TB-EPSs, respectively. In addition, the decreased rheological properties of sludge was also related to the increased zeta potential, decreased particle size and the removal of key organic matters of (10⁴-10⁶ Da) with the extraction of stratified EPSs. These results were significant to take advantages of the rheological properties for sludge treatment in the presence of NPs.

Understanding and optimization of the flocculation process in biological wastewater treatment processes: A review

In the operation of biological wastewater treatment processes, fast sludge settling during liquid-solids disengagement is preferred as it affects effluent quality, treatment efficiency and plant operation economy. An important property of fast settling biological sludge is the ability to spontaneously form big and dense flocs (flocculation) that readily separates from water. Therefore, there had been much research to study the conditions that promote biological sludge flocculation. However, reported findings have often been inconsistent and this has possibly been due to the complex nature of the biological flocculation process. Thus, it has been challenging for wastewater treatment plant operators to extract practical information from the literature. The aim of this review is to summarize the current state of understanding of the factors that affect sludge flocculation so that evaluation of such information can be facilitated and strategize for intervention in the sludge flocculation and deflocculation process.

Effect of CuO nanoparticles on ammonia removal and EPS secretion of CANON sludge in the presence of nitrite suppression

Completely autotrophic nitrogen removal over nitrite (CANON) process was an innovative technology for nitrogen removal from wastewater. It is necessary to clear the impact of CuO nanoparticles (CuO NPs) on CANON process since the widespread utilize increased their opportunity for entering into wastewater. In this study, the short-term and long-term effects of CuO NPs on the ammonia removal and extracellular polymeric substance (EPS) secretion were analyzed in the presence of nitrite, with the CuO NPs of 0, 5, 10, 20, 50, 100, 200, and 500 mg L^-1, respectively. Results suggested that low concentration of CuO NPs could enhance the ammonia removal. The inhibition threshold of CuO NPs on CANON sludge within short-term exposure was 20 mg L^-1, while that of long-term exposure was 10 mg L^-1. Both short-term and long-term exposure within CuO NPs significantly impacted the ammonia removal, and both the nitrite and CuO NPs influenced the EPS secretion.

Insight into the impact of Fe3O4 nanoparticles on anammox process of subsurface-flow constructed wetlands under long-term exposure

The increasing use of Fe₃O₄ nanoparticles (NPs) had posed an emerging challenge to wastewater treatment processes, and their potential impact on anaerobic ammonium oxidation (anammox) process of unplanted subsurface-flow constructed wetlands (USFCWs) was investigated firstly under the long-term exposure of different Fe₃O₄ NP concentrations. It was found that Fe₃O₄ NP exposure could improve total nitrogen (TN) removal. The abundance of Candidatus Anammoxoglobus increased significantly at 10 mg/L Fe₃O₄ NPs, while decreased under 1 mg/L Fe₃O₄ NP exposure. Desulfosporosinus and Exiguobacterium increased to some extent at 1 mg/L Fe₃O₄ NPs, suggesting that Fe-anammox played an important role in TN removal. The ROS production increased with the increase of Fe₃O₄ NP concentration, and the integrity of cell membrane was good under Fe₃O₄ NP exposure. The functional genes that related to inorganic ion transport and metabolism and lipid transport and metabolism were upregulated, and cell motility decreased after long-term exposure of 1 mg/L Fe₃O₄ NPs. Graphical abstract ᅟ.

Effects and fate of TiO2 nanoparticles in the anaerobic treatment of wastewater and waste sludge

The increasing use of TiO₂ nanoparticles (NPs) in customer products has also increased the concerns about their effects in the environment. Anaerobic digestion is a process probably exposed to high concentrations of TiO₂ NPs due to its application for wastewater and waste sludge treatment. In this work, it was studied the anaerobic digestion performance and the extracellular polymeric substances (EPS) production in presence of TiO₂ NPs, as well as the fate of TiO₂ NPs in anaerobic reactors. Results showed that methane production enhanced an average of 14.9% in presence TiO₂ NPs, which is considered a positive effect. A strong affinity between TiO₂ NPs and EPS was found, especially for proteins (PRO) and polysaccharides (PS) in the loosely and tightly bound EPS layers of microorganisms (LB-EPS and TB-EPS). Ti quantification indicated that 92% of the TiO₂ NPs are removed by anaerobic sludge, while 8% remain in the treated effluent.

Performance and microbial community of CIC anaerobic reactor treating food waste under different grease contents and inner circulation ratio

High concentrations of grease easily inhibit anaerobic digestion. The stability of the process and microbial responses in the controlling internal circulation (CIC) reactor used for treating food waste were investigated under different grease contents and inner circulation ratios. Results showed that at the grease content of 1 g/L, the removal rates of 94% and 86-93% were achieved for chemical oxygen demand (COD) and NH₃-N, respectively. In contrast, when the grease content increased to 7 g/L, removal rates for COD and NH₃-N significantly decreased to 42.8 and 10%, respectively. In the three-dimensional excitation and emission matrix (3D-EEM) spectra of LB-EPS (loosely bound extracellular polymeric substances), the fluorescence intensity of coenzyme F₄₂₀ was weakened in the granular sludge, and the fluorescence peak of aromatic protein disappeared in the TB-EPS (tightly bound EPS). The activity and stability of the granular sludge deteriorated with increasing grease content, in this case at 7 g/L. However, when the inner cycle ratio was increased to 4, the removal rate of COD and NH₃-N increased to about 70 and 76%, respectively. The adverse effects of grease could be decreased by increasing the inner cycle ratio. When the grease content increased from 1 to 7 g/L, the abundance of Methanofollis increased from 9.93 to 46.41%, while Methanothrix abundance was reduced from 18.4 to 3.07%. It could indicate that Methanothrix was sensitive to high grease content.

Anaerobic accumulation of short-chain fatty acids from algae enhanced by damaging cell structure and promoting hydrolase activity

Short-chain fatty acid (SCFAs) produced from harvested algae by anaerobic fermentation with uncontrolled pH was limited due to the solid cell structure of algae. This study, therefore, was undertaken to enhance the generation of SCFAs from algae by controlling the fermentation pH. pH influenced not only the total SCFAs production, but the percentage of individual SCFA. The maximal yield of SCFAs occurred at pH 10.0 and fermentation time of 6 d (3161 mg COD/L), which mainly contained acetic and iso-valeric acids and was nearly eight times that at uncontrolled pH (392 mg COD/L). Mechanism exploration revealed at alkaline pH, especially at pH 10.0, not only the cell structure of algae was damaged effectively, but also activities and relative quantification of hydrolases as well as the abundance of microorganisms responsible for organics hydrolysis and SCFAs production were improved. Also, the released microcystins from algae were removed efficiently during alkaline anaerobic fermentation.

The effects of extracellular polymeric substances on magnetic iron oxide nanoparticles stability and the removal of microcystin-LR in aqueous environments

The behaviors of nanoparticles rely on the aqueous condition such as natural organic matter (NOM). Therefore the presence of NOM would influence the interaction of nanoparticles with other substances possibly. Here, microcystin-LR (MC-LR) adsorption on iron oxide nanoparticles (IONPs) was studied in an aqueous solution with different types of NOM, including extracellular polymeric substances (EPS) from cyanobacteria and alginic acid sodium salt (AASS) from brown algae. Results revealed that EPS played an important role in stabilizing IONPs and in the toxin adsorption efficiency. The stability of IONPs was heavily depended on the concentration and type of NOM, which can affect the surface charge of IONPs significantly in solution. The enhanced stability of IONPs was due to the electrostatic interactions. Adsorption kinetics and isotherm studies confirmed that NOM can affect the IONPs' adsorption efficiency, and pseudo-second-order kinetics better explained this process. The removal efficiency for MC-LR decreased in the presence of NOM (Control > EPS-M1 > AASS > EPS-M9), indicating that NOM and MC-LR compete for limited adsorption sites. The presence of NOM in a eutrophic environment stabilized the IONPs while inhibiting the MC-LR removal efficiency. This investigation emphasized the negative effect of cyanobacterial EPS on the removal of microcystins when using magnetic separation technology. And this results could also be used to model the transportation of iron minerals carrying toxic substances in aqueous environment.

Sustainable pollutant removal by periphytic biofilm via microbial composition shifts induced by uneven distribution of CeO2 nanoparticles

The responses of periphytic biofilm to CeO₂ nanoparticle (CNP) exposure were explored by investigating community shifts and pollutant removal. Results showed that CNPs entered the sensitive microbial cells in the periphytic biofilm, leading to cytomembrane damage and intracellular reactive oxygen species (ROS) generation. The periphytic biofilm communities were, however, able to adapt to the prolonged exposure and maintain their pollutant removal (i.e., phosphorus, nitrogen and copper, organic matter) performance. Observations under synchrotron radiation scanning transmission X-ray microscopy revealed that fewer CNPs were distributed in algal cells compared to bacterial cells, wherein the transformation between Ce(IV) and Ce(III) occurred. High-throughput sequencing further showed that the proportion of algae, such as Leptolyngbya and Nostoc, significantly increased in the periphytic biofilm exposed to CNPs while the proportion of bacteria, such as Bacilli and Gemmatimonadetes, decreased. This change in community composition might be the primary reason for the sustained pollutant removal performance of the periphytic biofilm.

Nitrate removal and extracellular polymeric substances of autohydrogenotrophic bacteria under various pH and hydrogen flow rates

In recent years there has been an increasing interest in the use of autohydrogenotrophic bacteria to treat nitrate from wastewater. However, our knowledge about the characteristics of extracellular polymeric substances (EPS) releasing by these activities is not yet very advanced. This study aimed to investigate the change in EPS compositions under various pH values and hydrogen flow rates, taking into consideration nitrogen removal. Results showed that pH7.5 and a hydrogen flow rate of 90mL/min were the optimal operating conditions, resulting in 100% nitrogen removal after 6hr of operation. Soluble and bound polysaccharides decreased, while bound proteins increased with increasing pH. Polysaccharides increased with increasing hydrogen flow rate. No significant change of bound proteins was observed at various hydrogen flow rates.

Crystalline phase-dependent eco-toxicity of titania nanoparticles to freshwater biofilms

The potential toxic impacts of different crystal phases of titania nanoparticles (TNPs) on freshwater biofilms, especially under ultraviolet C irradiation (UVC), are unknown. Here, adverse impacts of three phases (anatase, rutile, and P25, 50 mg L^-1 respectively) with UVC irradiation (An-UV, Ru-UV, and P25-UV) on freshwater biofilms were conducted. Characterization experiments revealed that rutile TNPs had a higher water environment stability than anatase and P25 TNPs, possessing a stronger photocatalytic activity under UVC irradiation. Phase-dependent inhibition of cell viability and significant decreases of four- and five-fold in algal biomass at 12 h of exposure were observed compared with unexposed biofilms. Moreover, phase-dependent oxidative stress resulted in remarkably significant reductions (P < 0.01) of the photosynthetic yields of the biofilms, to 40.32% (P25-UV), 48.39% (An-UV), and 46.77% (Ru-UV) of the plateau value obtained in the unexposed biofilms. A shift in community composition that manifested as a strong reduction in diatoms, indicating cyanobacteria and green algae were more tolerant than diatoms when exposed to TNPs. In terms of the toxic mechanisms, rutile TNPs resulted in apoptosis by inducing excessive intracellular reactive oxygen species (ROS) production, whereas P25 and anatase TNPs tended to catalyze enormous acellular ROS lead to cell necrosis under UVC irradiation.

Response of anaerobic membrane bioreactor to the presence of nano-Bi2WO6: reactor performance, supernatant characteristics, and microbial community

Considering the increasing incorporation of manufactured nano-material into consumer products, there is a concern about its potential impacts in biological wastewater treatment. In this study, the response of anaerobic sludge to the presence of Bi₂WO₆ nano-particles (NPs) was investigated in the anaerobic membrane bioreactor (AnMBR). As the concentration of Bi₂WO₆ in the reactor was controlled around 1 mg/L, there was no significant difference in effluent water quality or bacterial activities before and after NP exposure, partially due to the microbial-induced NP aggregation and stable complex formation. However, with the increasing dosage of Bi₂WO₆ from 5 to 40 mg/L, great influences on the AnMBR performance were observed, including the reduction of COD removal efficiency, inhibition of the mechanization step, increased production of soluble microbial products, and enhanced secretion of extracellular polymer substrates. Additional investigation with high-throughput sequencing was conducted, clearly demonstrating that Bi₂WO₆ NPs induced changes in the bacterial community.

Toxic effects of three crystalline phases of TiO2 nanoparticles on extracellular polymeric substances in freshwater biofilms

Comparative toxicity of three typical TiO₂ NPs (Anatase, Rutile, and Degussa P25, 50mg/L respectively) under UVC irradiation (An+UV, Ru+UV, and P25+UV) on production and chemical characteristics of EPS in freshwater biofilms were investigated. Rutile was more stable in lake water, yet P25 and anatase were endowed with better photo-oxidation capacity. TiO₂ NPs+UV enhanced total EPS, manifesting as LB-EPS increased by 98.16% (An+UV), 143.03% (Ru+UV), and 48.21% (P25+UV), while TB-EPS increased to 1.51 (An+UV), 1.36 (Ru+UV), and 1.61 (P25+UV) times greater than control without NPs and UVC, being mainly attributed to increase of polysaccharide and proteins. Three-dimensional fluorescence spectrum revealed tyrosine (An+UV and P25+UV) and tryptophan (P25+UV) protein-like substances vanished in LB-EPS. Fourier transform infrared spectroscopy indicated PO (An+UV and P25+UV) and CO or COC (P25+UV) disappeared in EPS. P25+UV and An+UV caused more lactate dehydrogenase release, while Ru+UV induced more reactive oxygen species and malondialdehyde production, consistent with decreased in cells viability.

Comparison of the effects and distribution of zinc oxide nanoparticles and zinc ions in activated sludge reactors

Zinc Oxide nanoparticles (ZnO NPs) are being increasingly applied in the industry, which results inevitably in the release of these materials into the hydrosphere. In this study, simulated waste-activated sludge experiments were conducted to investigate the effects of Zinc Oxide NPs and to compare it with its ionic counterpart (as ZnSO₄). It was found that even 1 mg/L of ZnO NPs could have a small impact on COD and ammonia removal. Under 1, 10 and 50 mg/L of ZnO NP exposure, the Chemical Oxygen Demand (COD) removal efficiencies decreased from 79.8% to 78.9%, 72.7% and 65.7%, respectively. The corresponding ammonium (NH₄⁺ N) concentration in the effluent significantly (P < 0.05) increased from 11.9 mg/L (control) to 15.3, 20.9 and 28.5 mg/L, respectively. Under equal Zn concentration, zinc ions were more toxic towards microorganisms compared to ZnO NPs. Under 50 mg/L exposure, the effluent Zn level was 5.69 mg/L, implying that ZnO NPs have a strong affinity for activated sludge. The capacity for adsorption of ZnO NPs onto activated sludge was found to be 2.3, 6.3, and 13.9 mg/g MLSS at influent ZnO NP concentrations of 1.0, 10 and 50 mg/L respectively, which were 1.74-, 2.13- and 2.05-fold more than under Zn ion exposure.

Response of Aerobic Granular Sludge to the Long-Term Presence of CuO NPs in A/O/A SBRs: Nitrogen and Phosphorus Removal, Enzymatic Activity, and the Microbial Community

The increasing use of cupric oxide nanoparticles (CuO NPs) has raised concerns about their potential environmental toxicity. Aerobic granular sludge (AGS) is a special form of microbial aggregates. In this study, the removal efficiencies of nitrogen and phosphorus, enzyme activities and microbial community of AGS under long-term exposure to CuO NPs (at concentrations of 5, 20, 50 mg/L) in aerobic/oxic/anoxic (A/O/A) sequencing batch reactors (SBRs) were investigated. The results showed the chronic toxicity caused by different concentrations of CuO NPs (5, 20, 50 mg/L) resulted in increases in the production of ROS of 110.37%, 178.64%, and 188.93% and in the release of lactate dehydrogenase (LDH) of 108.33%, 297.05%, 335.94%, respectively, compared to the control. Besides, CuO NPs decreased the activities of polyphosphate kinase (PPK) and exophosphatase (PPX), leading to lower phosphorus removal efficiency. However, the NH₄⁺-N removal rates remained stable, and the removal efficiencies of TN increased due to the synthesis of nitrite and nitrous oxide (N₂O) reductases. In addition, CuO NPs at concentrations of 0, 5, 20 mg/L increased the secretion of protein (PN) to 90, 91, 105 mg/gVSS, respectively, which could alleviate the toxicity of CuO NPs. High-throughput sequencing showed that CuO NPs increased the abundance of nitrogen-removal bacteria and reduced the abundance of phosphorus-removal bacteria, which is consistent with the results of pollutant removal upon long-term exposure to CuO NPs.

Changes in nutrient removal and flocs characteristics generated by presence of ZnO nanoparticles in activated sludge process

The aim of this work was to evaluate the impact generated by ZnO NPs on the activated sludge process treating raw (RWW) and filtered wastewater (FWW). It was analyzed the oxygen uptake rate, nutrient removal, flocs characteristics and the morphological interactions between activated sludge and ZnO NPs, in presence of 450-2000 mg/L. The results showed that the presence of more than 450 mg/L of ZnO NPs in raw and filtered wastewater inhibited the oxygen uptake by activated sludge. The highest inhibition was 35% in presence of 1500 mg/L in RWW. The organic matter removal was only inhibited in the presence of 450 and 900 mg/L of ZnO NPs; while ammonia removal decreased for all concentrations of ZnO NPs in both types of wastewater, around 13% for RWW and up to 9% for FWW. The orthophosphate removal improved as the concentration of ZnO NPs increased for both wastewater types, enhancing up to 8% for RWW and 17% for FWW. The flocs size of activated sludge exposed to ZnO NPs in RWW decreased as the concentration of ZnO NPs increased; while for FWW, an opposite effect was observed. The elemental mapping allowed detect the Zn inside of microorganisms, which may correspond to a toxicity mechanism in RWW and FWW. These results indicated that the changes in nutrient removal and flocs characteristics caused by the presence of ZnO NPs on the activated sludge are related to wastewater characteristics, such as suspended solids, type of substrate and concentration of ZnO NPs.

Long-term impacts of titanium dioxide nanoparticles (TiO2 NPs) on performance and microbial community of activated sludge

The long-term impacts of titanium dioxide nanoparticles (TiO₂ NPs) on the performance and microbial community of activated sludge were evaluated in a sequencing batch reactor (SBR). TiO₂ NPs impacted the COD and phosphorus removals of activated sludge, whereas the NH₄⁺-N removal efficiency had no distinct change at 0-60mg/L TiO₂ NPs. The presence of TiO₂ NPs obviously inhibited the organic matter and nitrogen removal rates of activated sludge. The phosphorus removal rate gradually reduced at 0-5mg/L TiO₂ NPs and then increased at 10-60mg/L TiO₂ NPs. The removal rates of organic matter, nitrogen and phosphorus had the similar varying trends to the corresponding microbial enzymatic activities. High TiO₂ NPs concentration promoted more reactive oxygen species (ROS) production and lactate dehydrogenase (LDH) release of activated sludge. The microbial richness and diversity of activated sludge were obviously affected at the phyla, class and genus levels.

Transport, fate, and long-term impacts of metal oxide nanoparticles on the stability of an anaerobic methanogenic system with anaerobic granular sludge

The fate and long-term effect of different metal oxide (TiO₂, CuO and ZnO) nanoparticles (NPs) on anaerobic granular sludge (AGS) was evaluated in an anaerobic methanogenic system. Operation stability and structural characteristics of the granules were compared, the metabolism changes in the microbial community were quantified, and NPs fate were investigated. CuO NPs had greatest toxic effect on AGS after extended exposure, whereas ZnO NPs benefited methanogenesis temporarily (no more than 5d). The inhibition on AGS caused by NPs varied due to the unique structure of AGS and different toxic mechanism. Structural changes of AGS provided new evidence that tested NPs have different toxicity.

Comparison and distribution of copper oxide nanoparticles and copper ions in activated sludge reactors

Copper oxide nanoparticles (CuO NPs) are being increasingly applied in the industry which results inevitably in the release of these materials into the hydrosphere. In this study, simulated waste-activated sludge experiments were conducted to investigate the effects of Copper Oxide NPs at concentrations of 0.1, 1, 10 and 50 mg/L and to compare it with its ionic counterpart (CuSO₄). It was found that 0.1 mg/L of CuO NPs had negligible effects on Chemical Oxygen Demand (COD) and ammonia removal. However, the presence of 1, 10 and 50 mg/L of CuO NPs decreased COD removal from 78.7% to 77%, 52.1% and 39.2%, respectively (P < 0.05). The corresponding effluent ammonium (NH₄-N) concentration increased from 14.9 mg/L to 18, 25.1 and 30.8 mg/L, respectively. Under equal Cu concentration, copper ions were more toxic towards microorganisms compared to CuO NPs. CuO NPs were removed effectively (72-93.2%) from wastewater due to a greater biosorption capacity of CuO NPs onto activated sludge, compared to the copper ions (55.1-83.4%). The SEM images clearly showed the accumulation and adsorption of CuO NPs onto activated sludge. The decrease in Live/dead ratio after 5 h of exposure of CuO NPs and Cu²⁺ indicated the loss of cell viability in sludge flocs.

Acute Responses of Microorganisms from Membrane Bioreactors in the Presence of NaOCl: Protective Mechanisms of Extracellular Polymeric Substances

Extracellular polymeric substances (EPS) are key foulants in membrane bioreactors (MBRs). However, their positive functions of protecting microorganisms from environmental stresses, e.g., during in situ hypochlorite chemical cleaning of membranes, have not been adequately elucidated. In this work, we investigated the response of microorganisms in an MBR to various dosages of NaOCl, with a particular emphasis on the mechanistic roles of EPS. Results showed that functional groups in EPS such as the hydroxyl and amino groups were attacked by NaOCl, causing the oxidation of polysaccharides, denaturation of amino acids, damage to protein secondary structure, and transformation of tryptophan protein-like substances to condensed aromatic ring substances. The presence of EPS alleviated the negative impacts on catalase and superoxide dismutase, which in turn reduced the concentration of reactive oxygen species (ROS) in microbial cells. The direct extracellular reaction and the mitigated intracellular oxidative responses facilitated the maintenance of microbial metabolism, as indicated by the quantity of adenosine triphosphate and the activity of dehydrogenase. The reaction with NaOCl also led to the changes of cell integrity and adhesion properties of EPS, which promoted the release of organic matter into bulk solution. Our results systematically demonstrate the protective roles of EPS and the underlying mechanisms in resisting the environmental stress caused by NaOCl, which provides important implications for in situ chemical cleaning in MBRs.

Effects of ZnO nanoparticle exposure on wastewater treatment and soluble microbial products (SMPs) in an anoxic-aerobic membrane bioreactor

The effect of zinc oxide nanoparticles (ZnO NPs) on the performance of an anoxic-aerobic submerged membrane bioreactor (MBR), and the characterization of the soluble microbial products (SMPs) produced in the presence of ZnO NPs was evaluated. Continuous operation over 144 days showed that ZnO NPs at concentrations of 10 and 50 mg/L exerted a negative impact on chemical oxygen demand (COD) and nitrogen removal, although ZnO NPs were efficiently removed in the MBR (>92%). 10 and 50 mg/L ZnO NPs decreased COD removal substantially from 93.1± 0.6% to 90.1± 0.8% (<0.05) and 86.3± 2.3% (<0.05), respectively. Similarly, with 10 and 50 mg L ZnO NPs, the decreased in NH₄N removal was 8.1% and 21.1%, respectively. Exposure to 1, 10 and 50 mg/L ZnO NPs increased SMP concentrations by 12.8%, 42.4% and 51.5%, respecti. High performance size exclusion chromatograph (HP-SEC) analysis revealed that the presence of ZnO NPs caused a significant increase in high-molecular weight (MW) (583 kDa) SMPs at 1 and 10 mg/L ZnO NP concentration. A substantial decrease in the concentration of high-MW compounds in the MBR effluent was observed at the end of the experiment. Excitation emission matrix (EEM) fluorescence contours revealed that SMPs were dominated by amino acid-, tryptophan protein-, polyaromatic-, and polycarboxylate-type substances. The presence of ZnO NPs enhanced the production of amino acid-like (7.5-25.1%) and tryptophan protein-like compounds (31.7-38.1%), compared to the control (6.0-20.2% for amino acid-like compounds; and 28.5-36.7% for tryptophan protein-like compounds). In contrast, the fulvic and humic acid-like compounds decreased with exposure to ZnO NPs. This work may help better understanding the effect of nanoparticle exposure on wastewater treatment performance and SMP characteristics.

Response of wastewater biofilm to CuO nanoparticle exposure in terms of extracellular polymeric substances and microbial community structure

The growing production and application of CuO nanoparticles increase the chance that these particles will be released into wastewater treatment plants (WWTPs) and interact with microorganisms. However, the toxicity response mechanism of biofilm to NP exposure may be different from that of activated sludge due to the denser and stronger microbial aggregate structure of biofilm. Thus, in this study, the response to CuO NPs of wastewater biofilm collected from a rotating biological contactor was investigated. Short-term exposure (24h) to CuO NPs led to a great loss in cell viability, and SEM-EDS images revealed that the nano-CuO aggregates were not transformed to Cu-S species in the biofilm samples. In response, more extracellular polymeric substance (EPS) (especially loosely bound-EPS) was produced in wastewater biofilm exposed to CuO NPs, with a higher content of protein compared to polysaccharides. The shifts of fluorescence intensity and peak locations in 3D-EEM fluorescence spectra indicated chemical changes of the EPS components. FT-IR analysis revealed that exposure to nano-CuO had more distinct effects on the functional groups of proteins and polysaccharides in LB-EPS. Illumina sequencing of 16S rRNA gene amplicons revealed that CuO NPs enhanced bacterial diversity. The bacterial community structure significantly shifted, with a significantly increased abundance of Comamonas, a slight increase in Zoogloea, and a notable decrease in Flavobacterium. The shifts of these dominant genera may be associated with altered EPS production, which might result in microbial community function fluctuations. In conclusion, exposure to high concentrations of CuO NPs has the potential to shape wastewater biofilm bacterial community structure.

Long-term effects of cupric oxide nanoparticles (CuO NPs) on the performance, microbial community and enzymatic activity of activated sludge in a sequencing batch reactor

The long-term effects of cupric oxide nanoparticles (CuO NPs) on the performance, microbial activity and microbial community of activated sludge were investigated in a sequencing batch reactor (SBR). The SBR performance had no evident change at 0-10 mg/L CuO NPs, whereas the CuO NPs concentration at 30-60 mg/L affected the COD, NH₄⁺-N and soluble orthophosphate (SOP) removal, nitrogen and phosphorus removal rate and microbial enzymatic activity of activated sludge. Some CuO NPs might be absorbed on the surface of activated sludge or penetrate the microbial cytomembrane into the microbial cell interior of activated sludge. Compared to 0 mg/L CuO NPs, the reactive oxygen species (ROS) production and lactate dehydrogenase (LDH) release increased by 43.6% and 56.4% at 60 mg/L CuO NPs, respectively. The variations of ROS production and LDH release demonstrated that CuO NPs could induce the toxicity towards the microorganisms and destroy the integrity of microbial cytomembrane in the activated sludge. High throughput sequencing of 16S rDNA indicated that CuO NPs could evidently impact on the microbial richness, diversity and composition of activated sludge in the SBR.

Magnetic Fe3O4 nanoparticles induced effects on performance and microbial community of activated sludge from a sequencing batch reactor under long-term exposure

The performance and microbial community of activated sludge from a sequencing batch reactor (SBR) were investigated under long-term exposure of magnetic Fe₃O₄ nanoparticles (Fe₃O₄ NPs). The COD removal showed a slight decrease at 5-60mg/L Fe₃O₄ NPs compared to 0mg/L Fe₃O₄ NPs, whereas the NH₄⁺-N removal had no obvious variation at 0-60mg/L Fe₃O₄ NPs. It was found that 10-60mg/L Fe₃O₄ NPs improved the denitrification process and phosphorus removal of activated sludge. The microbial enzymatic activities of activated sludge could be affected by Fe₃O₄ NPs, which had similar variation trends to the nitrogen and phosphorus removal rates of activated sludge. The reactive oxygen species (ROS) production and lactate dehydrogenase (LDH) release demonstrated that Fe₃O₄ NPs led to the toxicity to activated sludge and destroyed the integrity of microbial cytomembrane. High throughput sequencing indicated that Fe₃O₄ NPs could obviously affect the microbial richness and diversity of activated sludge.

Effects of CeO2, CuO, and ZnO nanoparticles on physiological features of Microcystis aeruginosa and the production and composition of extracellular polymeric substances

Extracellular polymeric substances (EPS) are key components of the cyanobacterium Microcystis aeruginosa and play an important role in cyanobacteria blooms formation. Here, we analyzed the effects of 48-h exposure to nanosized CeO₂ (n-CeO₂), CuO (n-CuO), and ZnO (n-ZnO) on the production and composition of EPS of M. aeruginosa. Toxicity experiments revealed that soluble nanoparticles (NPs) (n-ZnO, n-CuO) demonstrated higher toxicity to cells and caused membrane damage. The production of LB-EPS increased by 34.48, 20.09, and 46.33 %, and TB-EPS increased by -5.78, 22.3, and -2.67 % in the presence of n-CeO₂, n-CuO, and n-ZnO NPs, respectively, and polysaccharides are the main incremental portion compared with protein and humic acids. Three-dimensional excitation-emission fluorescence spectra revealed the enhancement of fulvic-humic-like and disappearance of tyrosine aromatic substances in TB-EPS compared with the slight changes observed in LB-EPS. Fourier-transform infrared spectroscopy illustrated the susceptibility of -NH₂ and double-bonded carbon and oxygen in amides to three types of NPs. These results improve our understanding of the potential influence of NPs on the aggregation behaviors of cyanobacteria and formation process of cyanobacteria blooms. Graphical abstract ᅟ.

Fate and transformation of nanoparticles (NPs) in municipal wastewater treatment systems and effects of NPs on the biological treatment of wastewater: a review

Fate, transformation of NPs in WWTP & effects on wastewater treatment.

Antioxidant enzyme activities as biomarkers of fluvial biofilm to ZnO NPs ecotoxicity and the Integrated Biomarker Responses (IBR) assessment

The presence of ZnO nanoparticles (ZnO NPs) in natural waters has raised concerns about their environmental impacts, but the potential influences of ZnO NPs on fluvial biofilm have not been reported. In this study, the utility of antioxidant enzyme activities (AEA) as biomarkers of fluvial biofilm to ZnO NPs toxicity and a method that combines AEA into an index of "Integrated Biomarker Responses (IBR)" were studied. Compared with the absence of ZnO NPs, scanning electron microscopy (SEM) images revealed that a large amount of ZnO NPs were adsorbed onto biofilm and these NPs exerted adverse effects on the viability of bacteria in biofilm. The production of reactive oxygen species (ROS) with high concentrations (30 and 100mg/L) of ZnO NPs exposure reached to 184% and 244% of the control, while no cell leakage and membrane damage were observed. After exposure to ZnO NPs for 0.25 and 3 days, the activities of catalase (CAT), superoxide dismutase (SOD) and glutathione reductase (GR), glutathione peroxidase (GSH-Px) were significantly increased, respectively. At the end of exposure period (21 days), the AEA with the presence of 1mg/L ZnO NPs exposure were comparable to the control, while most of those in high concentrations of ZnO NPs were decreased. The results of IBR showed that the biofilm can adapt to 1mg/L ZnO NPs exposure, while be seriously damaged by 30 and 100mg/L ZnO NPs after 3 and 0.25 days. IBR can be used as an appropriate evaluation system of the toxicity effects of ZnO NPs on fluvial biofim.

Impacts of CuO nanoparticles on nitrogen removal in sequencing batch biofilm reactors after short-term and long-term exposure and the functions of natural organic matter

The impacts of CuO nanoparticle (NP) exposure on total nitrogen (TN) removal in a sequencing batch biofilm reactor (SBBR) as well as the effects of natural organic matter (NOM) in wastewater were studied. Short-term exposure (8 h) to 1 and 50 mg/L CuO NPs induced negligible influence on the nitrogen removal efficiency, and biofilms could recover from the slight damage caused by the prolonged exposure (45 days) to 1 mg/L CuO NPs. On the other hand, long-term exposure to 50 mg/L CuO NPs notably decreased the nitrogen removal efficiencies to 47.74 and 59.04 % in the absence and presence of bovine serum albumin (BSA), much lower than those in the control (75.43 %), mainly as the suppressed denitrification process. Analysis of key enzyme activities showed that the activities of nitrite reductase and nitrate reductase were obviously reduced with 50 mg/L CuO NP exposure. Further studies revealed that the inhibited nitrite/nitrate reductase was related to the variations of microenvironment pH and decrease of nirS and nirK by microelectrode and fluorescent quantitative polymerase chain reaction (PCR) analysis. In addition, the presence of BSA mitigated the toxicity of CuO NPs due to the enhanced particle size and Cu²⁺ release, electrostatic repulsion, and surface coating of CuO NPs, which indicated that lower inhibition effects of CuO NPs in NOM-rich wastewater is of importance when evaluating the environmental risk of NPs to wastewater treatment plants.

Effects of CeO2 nanoparticles on sludge aggregation and the role of extracellular polymeric substances - Explanation based on extended DLVO

The extended DLVO (XDLVO) theory was applied to elucidate the potential effects of CeO₂ nanoparticles (CeO₂ NPs) on sludge aggregation and the role of extracellular polymeric substances (EPS). In this study, seven different concentrations of CeO₂ NPs were added to activated sludge cultured in sequencing batch reactors (SBRs) and compared with a control test that received no CeO₂ NPs. After exposure to 50mg/L CeO₂ NPs, a negligible change (p>0.1) occurred in the sludge volume index (SVI), whereas the flocculability and aggregation of the sludge decreased by 18.8% and 11.2%, respectively, resulting in a high effluent turbidity. The XDLVO theory demonstrated that the adverse effects of the CeO₂ NPs on sludge aggregation were due to an enhanced barrier energy. Compared to the van der Waals energies (W_A) and the electric double layer (W_R), the acid-base interaction (W_AB) markedly changed for the various concentrations of CeO₂ NPs. The EPS played a decisive role in the sludge surface characteristics, as the removal of EPS equals to the negative effects induced by 5-10mg/L CeO₂ NPs on the sludge flocculability and aggregation. The presence of CeO₂ NPs induced negative contributions to the tight boundary EPS (TB-EPS) and core bacteria while positive contributions to the total interaction energy of the loose boundary EPS (LB-EPS).

Aggregation and removal of copper oxide (CuO) nanoparticles in wastewater environment and their effects on the microbial activities of wastewater biofilms

The transport behaviors of copper oxide (CuO) NPs in wastewater matrix and their possible impacts on microbial activities of stable wastewater biofilms cultivated in a lab scale rotating biological contactor (RBC) were investigated. Significant aggregation of CuO NPs was observed in the wastewater samples, depending on their mass concentrations. Extracellular polymeric substance (EPS)-adsorbed copper accounted for a large proportion of the total copper accumulated in biofilms. The microelectrode profiles showed that a single pulse exposure to 50mg/L CuO resulted in a deeper penetration depth of oxygen in biofilms compared to the CuO NP free biofilms. The maximum oxygen consumption rate shifted to the deeper parts of biofilms, indicating that the respiration activities of bacteria in the top region of the biofilms was significantly inhibited by CuO NPs. Biofilms secreted more EPS in response to the nano-CuO stress, with higher production of proteins compared to polysaccharides.