Biosurfactant: A new frontier for greener technology and environmental sustainability

Mannosylerythritol lipids: production, downstream processing, and potential applications

Mannosylerythritol lipids (MELs) are biosurfactants produced by various fungal species. Depending on the degree of acetylation and further chemical modifications, these glycolipids can show remarkable biological properties, including the increase of water retention in the stratum corneum suppression of melanogenic enzymes tyrosinase-1 and -2, reversion of UV-A radiation-induced aquaporin-3 suppression, skin whitening, and anti-aging effects. These applications of MELs require high purity, which is usually reached by liquid-liquid extraction followed by chromatography, obtaining ≥95% purity. This worked aimed to critically discuss the current state of the art and trends on the production of MELs, including post-production treatment as enzymatic conversion. In addition, their application as skincare or pharmaceutical agents and agricultural biostimulants.

Gene Expression and Characterization of Iturin A Lipopeptide Biosurfactant from Bacillus aryabhattai for Enhanced Oil Recovery

Biosurfactants are eco-friendly surface-active molecules recommended for enhanced oil recovery techniques. In the present study, a potential lipopeptide (biosurfactant) encoding the iturin A gene was synthesized from Bacillus aryabhattai. To improvise the yield of the lipopeptide for specific applications, current research tends toward engineering and expressing recombinant peptides. An iturin A gene sequence was codon-optimized, amplified with gene-specific primers, and ligated into the pET-32A expression vector to achieve high-level protein expression. The plasmid construct was transformed into an E. coli BL21 DE3 host to evaluate the expression. The highly expressed recombinant iturin A lipopeptide was purified on a nickel nitrilotriacetic acid (Ni-NTA) agarose column. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) revealed that the purity and molecular mass of iturin A was 41 kDa. The yield of recombinant iturin A was found to be 60 g/L with a 6.7-fold increase in comparison with our previously published study on the wild strain. The approach of cloning a functional fragment of partial iturin A resulted in the increased production of the lipopeptide. When motor oil was used, recombinant protein iturin A revealed a biosurfactant property with a 74 ± 1.9% emulsification index (E24). Purified recombinant protein iturin A was characterized by mass spectrometry. MALDI-TOF spectra of trypsin digestion (protein/trypsin of 50:1 and 25:1) showed desired digested mass peaks for the protein, further confirming the identity of iturin A. The iturin A structure was elucidated based on distinctive spectral bands in Raman spectra, which revealed the presence of a peptide backbone and lipid. Recombinant iturin A was employed for enhanced oil recovery through a sand-packed column that yielded 61.18 ± 0.85% additional oil. Hence, the novel approach of the high-level expression of iturin A (lipopeptide) as a promising biosurfactant employed for oil recovery from Bacillus aryabhattai is not much reported. Thus, recombinant iturin A demonstrated its promising ability for efficient oil recovery, finding specific applications in petroleum industries.

Luminescence study of Sm3+ ,Eu3+ -doped Y2 Zr2 O7 host: optical investigation of greenish yellow to red colour tunable pyrochlore phosphor

Pyrochlore phosphors have shown their worth in modern day lighting in the last few years. Colour tunability of the phosphor is one of the modern techniques used to obtain white light-emitting diodes (WLEDs). In the proposed work, Y₂ Zr₂ O₇ :Sm³⁺ ,Eu³⁺ phosphors were investigated for WLED applications as well as display devices. A convectional solid-state diffusion method was used to synthesize the proposed phosphors. X-ray diffraction of the proposed phosphors was performed and compared with the standard Inorganic Crystal Structure Database. The crystal structure of the sample was cubic in nature, obtained from Rietveld refinement. Vibrational and morphological studies on the samples were carried out using Fourier transform infrared spectroscopy and scanning electron microscopy analysis. The photoluminescence study of the colour tunable phosphor showed the characteristic peak of Sm³⁺ together with the two sharp peaks of Eu³⁺ ions. Greenish yellow to red colour tunability was observed in the proposed phosphor with enhancement of Eu³⁺ ions. All these results showed the worth of this sample for WLEDs applications as well as in display devices.

Characterization of a potent biosurfactant produced from Franconibacter sp. IITDAS19 and its application in enhanced oil recovery

Biosurfactants are surface-active molecules produced from microorganisms either on the cell surface or secreted extracellularly. Several biosurfactant producing microorganisms have been isolated to date, but they differ in their efficacy towards different types of hydrocarbons. Here, we report the isolation and characterization of a biosurfactant producing bacterium Franconibacter sp. IITDAS19 from crude oil contaminated soil. The biosurfactant was isolated, purified and characterized. It was identified as a glycolipid. It was found to be very stable at wide range of temperatures, pH and salt concentrations. It could reduce the surface tension of the water from 71 mN/m to 31 mN/m. IITDAS19 showed very high efficacy towards both aliphatic and aromatic hydrocarbons. It resulted in about 63% recovery of residual oil in a sand pack column. Our results suggested that the produced biosurfactant can be used for enhanced oil recovery. To our knowledge, this is the first report demonstrating the detailed characterization of a biosurfactant from Franconibacter spp.

Prospects in the bioremediation of petroleum hydrocarbon contaminants from hypersaline environments: A review

Hypersaline environments are underappreciated and are frequently exposed to pollution from petroleum hydrocarbons. Unlike other environs, the high salinity conditions present are a deterrent to various remediation techniques. There is also production of hypersaline waters from oil-polluted ecosystems which contain toxic hydrophobic pollutants that are threat to public health, environmental protection, and sustainability. Currently, innovative advances are being proposed for the remediation of oil-contaminated hypersaline regions. Such advancements include the exploration and stimulation of native microbial communities capable of utilizing and degrading petroleum hydrocarbons. However, prevailing salinity in these environments is unfavourable for the growth of non-halophylic microorganisms, thus limiting effective bioremediation options. An in-depth understanding of the potentials of various remediation technologies of hydrocarbon-polluted hypersaline environments is lacking. Thus, we present an overview of petroleum hydrocarbon pollution in hypersaline ecosystems and discuss the challenges and prospects associated with several technologies that may be employed in remediation of hydrocarbon pollution in the presence of delimiting high salinities. The application of biological remediation technologies including the utilization of halophilic and halotolerant microorganisms is also discussed.

Rapid Construction of Green Nanopesticide Delivery Systems Using Sophorolipids as Surfactants by Flash Nanoprecipitation

Green delivery carriers of nanopesticides, like sophorolipid biosurfactants, are of great significance to reduce environmental pollution and promote sustainable agricultural development. However, the molecular diversity of an unisolated sophorolipid mixture with almost unpredictable self-assembly properties has limited the in-depth study of its structure-activity relationship and hindered the development of green pesticide delivery systems. In this work, the acidic and lactonic sophorolipids were successfully separated from the sophorolipid mixture through silica gel column chromatography. A series of cost-effective green nanopesticides loaded with lambda-cyhalothrin (LC) were rapidly fabricated based on a combination of the acidic and lactonic sophorolipids as surfactants by flash nanoprecipitation. The effects of the acidic-to-lactonic ratio on particle size, drug loading capacity, and biological activity against Hyphantria cunea of LC-loaded nanoparticles were systematically investigated. The resultant nanopesticides exhibited a better insecticidal efficacy than a commercial emulsifiable concentrate formulation. This work opens up a novel strategy to construct scalable, cost-effective, and environmentally friendly nanopesticide systems.

Biosurfactants and chemotaxis interplay in microbial consortium-based hydrocarbons degradation

Hydrocarbons are routinely detected at low concentrations, despite the degrading metabolic potential of ubiquitous microorganisms. The potential drivers of hydrocarbons persistence are lower bioavailability and mass transfer limitation. Recently, bioremediation strategies have developed rapidly, but still, the solution is not resilient. Biosurfactants, known to increase bioavailability and augment biodegradation, are tightly linked to bacterial surface motility and chemotaxis, while chemotaxis help bacteria to locate aromatic compounds and increase the mass transfer. Harassing the biosurfactant production and chemotaxis properties of degrading microorganisms could be a possible approach for the complete degradation of hydrocarbons. This review provides an overview of interplay between biosurfactants and chemotaxis in bioremediation. Besides, we discuss the chemical surfactants and biosurfactant-mediated biodegradation by microbial consortium.

A Biosurfactant from Candida bombicola: Its Synthesis, Characterization, and its Application as a Food Emulsions

The present study aimed to produce a biosurfactant from Candida yeast cultivated in a low-cost medium made of sugar-cane molasses (5%), frying oil waste (5%), and corn steep liquor (5%). Initially, the production at the flask-scale was investigated and then scaled up in bioreactors to 1.2, 3.0, and 50 L to simulate a real production scale. The products obtained an excellent reduction in surface tensions from 70 to 29 mN·m⁻¹ in the flask-scale, comparable to 33 mN·m⁻¹ in the 1.2-L reactor, to 31 mN·m⁻¹ in the 3-L reactor, and to 30 mN·m⁻¹ in the 50-L reactor. Regarding the yield, it was observed that the isolation by liquid-to-liquid extraction aided biosurfactant production up to 221.9 g·L⁻¹ with a critical micellar concentration of 0.5%. The isolated biosurfactant did not exhibit an inhibitory effect on the germination of vegetable seeds and presented no significant acute toxicity in assays with Artemia salina and Allium cepa. Among the different formulations of mayonnaise-like sauces, the most stable formula was observed with the addition of the biosurfactant at a concentration of 0.5% and the greatest results were associated with the guar and carboxymethyl cellulose gums. Thus, the biosurfactant from C. bombicola represents a promising alternative as a food additive in emulsions.

Oil spills: impacts and perspectives of treatment technologies with focus on the use of green surfactants

Oil spills into the oceans cause irreparable damage to marine life and harms the coastal population of the affected areas. The main measures to be taken in response to an oil spill are to reduce the impact on marine life, prevent oil from reaching the shore through its recovery, and accelerate the degradation of unrecovered oil. Any environmental damage can be reduced if the spilled oil is removed from the water quickly and efficiently. Therefore, it is essential to know the treatment strategies for spilled oils. Several technologies are currently available, including booms, skimmers, in situ burning, use of adsorbents, dispersants/surfactants, and bioremediation. The selection of the type of treatment will depend not only on the effectiveness of the technique, but mainly on the type of oil, amount spilled, location, weather, and sea conditions. In this review, the characteristics of oil spills, their origin, destination, and impacts caused, including major accidents around the world, are initially addressed. Then, the main physical, chemical, and biological treatment technologies are presented, describing their advances, advantages, and drawbacks, with a focus on the use of green surfactants. These agents will be described in detail, showing the evolution of research, recent studies, patents, and commercialized products. Finally, the challenges that remain due to spills, the necessary actions, and the prospects for the development of existing treatment technologies are discussed, which must be linked to the use of combined techniques.

Valorization of dairy waste and by-products through microbial bioprocesses

Waste is an inherent and unavoidable part of any process which can be attributed to various factors such as process inefficiencies, usability of resources and discarding of not so useful parts of the feedstock. Dairy is a burgeoning industry following the global population growth, resulting in generation of waste such as wastewater (from cleaning, processing, and maintenance), whey and sludge. These components are rich in nutrients, organic and inorganic materials. Additionally, the presence of alkaline and acidic detergents along with sterilizing agents in dairy waste makes it an environmental hazard. Thus, sustainable valorization of dairy waste requires utilization of biological methods such as microbial treatment. This review brings forward the current developments in utilization and valorization of dairy waste through microbes. Aerobic and anaerobic treatment of dairy waste using microbes can be a sustainable and green method to generate biofertilizers, biofuels, power, and other biobased products.

Physicochemical Upgrading of a Biodetergent for Application in the Industrial Energy Sector

In the industries across the petroleum chain and those involved in energy generation, the use of petroderivatives as fuel oils is common. To clean parts, equipment and environments contaminated by hydrocarbons, they use expensive, toxic products, bringing risks to the environment as well as to workers’ health. Thus, the aim of this study was to check the stability of a biodetergent prepared using atoxic substances for large-scale production and industrial energy sector application. The relationship between volume (4 to 10 L) and stirring time (5 to 10 min) of the formulation at 3200 rpm and 80 °C was evaluated. The hydrophilic lipophilic balance (HLB), long-term stability (365 days), toxicity and efficiency of low-sulfur, viscous fuel oil removal from metal pieces and floors were investigated. The interaction among operating conditions was shown to influence the features of the product, which achieved approximately 100% stability after a stirring time of 7 min. The emulsion HBL index varied between 4.3 and 11.0. The biodetergent maintained its physicochemical properties during its 365 days of storage and showed high efficiency, removing 100% of the OCB1 impregnated on the metallic surfaces and floors tested. The formulation showed reliability in scale up when submitted to the study of physicochemical factors in the productive process, and safe application, by reducing risks for workers’ health and environment.

Production of biosurfactants from agro-industrial waste and waste cooking oil in a circular bioeconomy: An overview

Waste generation is becoming a global concern owing to its adverse effects on environment and human health. The utilization of waste as a feedstock for production of value-added products has opened new avenues contributing to environmental sustainability. Microorganisms have been employed for production of biosurfactants as secondary metabolites by utilizing waste streams. Utilization of waste as a substrate significantly reduces the cost of overall process. Biosurfactant(s) derived from these processes can be utilized in environmental and different industrial sectors. This review focuses on global market of biosurfactants followed by discussion on production of biosurfactants from waste streams such as agro-industrial waste and waste cooking oil. The need for waste stream derived circular bioeconomy and scale up of biosurfactant production have been narrated with applications of biosurfactants in environment and industrial sectors. Road blocks and future directions for research have also been discussed.

Tapping the Role of Microbial Biosurfactants in Pesticide Remediation: An Eco-Friendly Approach for Environmental Sustainability

Pesticides are used indiscriminately all over the world to protect crops from pests and pathogens. If they are used in excess, they contaminate the soil and water bodies and negatively affect human health and the environment. However, bioremediation is the most viable option to deal with these pollutants, but it has certain limitations. Therefore, harnessing the role of microbial biosurfactants in pesticide remediation is a promising approach. Biosurfactants are the amphiphilic compounds that can help to increase the bioavailability of pesticides, and speeds up the bioremediation process. Biosurfactants lower the surface area and interfacial tension of immiscible fluids and boost the solubility and sorption of hydrophobic pesticide contaminants. They have the property of biodegradability, low toxicity, high selectivity, and broad action spectrum under extreme pH, temperature, and salinity conditions, as well as a low critical micelle concentration (CMC). All these factors can augment the process of pesticide remediation. Application of metagenomic and in-silico tools would help by rapidly characterizing pesticide degrading microorganisms at a taxonomic and functional level. A comprehensive review of the literature shows that the role of biosurfactants in the biological remediation of pesticides has received limited attention. Therefore, this article is intended to provide a detailed overview of the role of various biosurfactants in improving pesticide remediation as well as different methods used for the detection of microbial biosurfactants. Additionally, this article covers the role of advanced metagenomics tools in characterizing the biosurfactant producing pesticide degrading microbes from different environments.

Low-cost production and application of lipopeptide for bioremediation and plant growth by Bacillus subtilis SNW3

At present time, every nation is absolutely concern about increasing agricultural production and bioremediation of petroleum-contaminated soil. Hence, with this intention in the current study potent natural surfactants characterized as lipopeptides were evaluated for low-cost production by Bacillus subtilis SNW3, previously isolated from the Fimkessar oil field, Chakwal Pakistan. The significant results were obtained by using substrates in combination (white beans powder (6% w/v) + waste frying oil (1.5% w/v) and (0.1% w/v) urea) with lipopeptides yield of about 1.17 g/L contributing 99% reduction in cost required for medium preparation. To the best of our knowledge, no single report is presently describing lipopeptide production by Bacillus subtilis using white beans powder as a culture medium. Additionally, produced lipopeptides display great physicochemical properties of surface tension reduction value (SFT = 28.8 mN/m), significant oil displacement activity (ODA = 4.9 cm), excessive emulsification ability (E24 = 69.8%), and attains critical micelle concentration (CMC) value at 0.58 mg/mL. Furthermore, biosurfactants produced exhibit excellent stability over an extensive range of pH (1-11), salinity (1-8%), temperature (20-121°C), and even after autoclaving. Subsequently, produced lipopeptides are proved suitable for bioremediation of crude oil (86%) and as potent plant growth-promoting agent that significantly (P < 0.05) increase seed germination and plant growth promotion of chili pepper, lettuce, tomato, and pea maximum at a concentration of (0.7 g/100 mL), showed as a potential agent for agriculture and bioremediation processes by lowering economic and environmental stress.

Potential of pineapple peel in the alternative composition of culture media for biosurfactant production

The large pineapple's consumption and processing have generated a massive amount of waste yearly, which requires adequate treatment measures to avoid damages to the environment. Pineapple peel is one of the main residues obtained from this fruit and a promising strategy to take advantage of its potential is using it for biosurfactant production due to the peel's rich composition in fermentable sugars and nutrients, such as potassium and magnesium that favor the Bacillus subtilis growth and biosurfactant excretion as well. The current research performed a central composite design (CCD) with four independent variables (glucose, pineapple peel, potassium, and magnesium), evaluating substrates' influence on the surface tension reduction rate (STRR) and the emulsification index (EI₂₄). The results indicated that pineapple peel has the necessary potential to act as a partial substitute for glucose and salt nutrients, minimizing the costs of supplementing with exogenous minerals. The highest surface tension reduction rate (57.744%) was obtained at 2.18% glucose (w/v); 14.67% pineapple peel (v/v); 2.38 g/L KH₂PO₄; and 0.15 g/L MgSO₄.7H₂O; whereas to obtain the maximum predicted value for EI₂₄ (61.92%) the medium was composed by 2.24% glucose (w/v); 12.63% pineapple peel (v/v); 2.53 g/L KH₂PO₄; and 0.29 g/L MgSO₄.7H₂O.

Bioremediation of petroleum contaminated soil through biosurfactant and Pseudomonas sp. SA3 amended design treatments

•

Potent PGP strain Pseudomonas sp SA3 was isolated from oil contaminated zone.

•

PGPR strain SA3 produce biosurfactant under petroleum stress.

•

Biosurfactant and strain SA3 amended treatments were developed.

•

Amended treatments effects the plant growth and pigments.

•

Treatment are efficient in reclamation of petroleum contaminated soil.

Toxicity of agricultural soil due to petroleum contamination has become a serious issue in recent times. Petrol oil exhibits toxic effects in agricultural crops due to the presence of various hazardous hydrocarbons. The degradation of petroleum hydrocarbon has been widely studied by the researchers that signify the requirement of effective treatments for the detoxification of petroleum contaminated soil and their reuse for growing crops. Hence, with this intention in the present study secondary metabolites “biosurfactant” (natural surfactant) along with the potent plant growth promoting (PGP) bacterial strain Pseudomonas sp. SA3 was used in the designed treatments for growing agricultural crop. The biosurfactant produced by the strain has the emulsification capacity of 43% and surface tension reduction ability to 34.5 mN/m whereas the plant growth promoting traits demonstrates 93.46 µg/mL phosphate solubilisation ability, siderophores (iron chelating compound) production upto 69.41% units and 81.41 µg/mL indole acetic acid  (IAA) production ability. Further, the results of the design treatments signifies that treatments amended with the strain SA3 and biosurfactant is effective in the management of petroleum contaminated soil indicating treatment EX 5 (1 kg soil + 1 L water + Pseudomonas sp. SA3 + 300 mL crude biosurfactant), as an efficient treatment in increment of phytochemical constituents and 10–15% enhancement in growth parameters as compared to negative control. Hence, the developed treatments can be efficaciously used for the management of petroleum contaminated soil for agronomy.

Removal of heavy oil from contaminated surfaces with a detergent formulation containing biosurfactants produced by Pseudomonas spp

Industrial plants powered by heavy oil routinely experience problems with leaks in different parts of the system, such as during oil transport, the lubrication of equipment and mechanical failures. The surfactants, degreasing agents and solvents that make up detergents commonly used for cleaning grease-covered surfaces are synthetic, non-biodegradable and toxic, posing risks to the environment as well as the health of workers involved in the cleaning process. To address this problem, surfactant agents of a biodegradable nature and low toxicity, such as microbial surfactants, have been widely studied as an attractive, efficient solution to replace chemical surfactants in decontamination processes. In this work, the bacterial strains Pseudomonas cepacia CCT 6659, Pseudomonas aeruginosa UCP 0992, Pseudomonas aeruginosa ATCC 9027 and Pseudomonas aeruginosa ATCC 10145 were evaluated as biosurfactant producers in media containing different combinations and types of substrates and under different culture conditions. The biosurfactant produced by P. aeruginosa ATCC 10145 cultivated in a mineral medium composed of 5.0% glycerol and 2.0% glucose for 96 h was selected to formulate a biodetergent capable of removing heavy oil. The biosurfactant was able to reduce the surface tension of the medium to 26.40 mN/m, with a yield of approximately 12.00 g/L and a critical micelle concentration of 60.00 mg/L. The biosurfactant emulsified 97.40% and dispersed 98.00% of the motor oil. The detergent formulated with the biosurfactant also exhibited low toxicity in tests involving the microcrustacean Artemia salina and seeds of the vegetable Brassica oleracea. The detergent was compared to commercial formulations and removed 100% of the Special B1 Fuel Oil (OCB1) from different contaminated surfaces, demonstrating potential as a novel green remover with industrial applications.

Green Synthesis of Silver Nanoparticles Using a Biosurfactant from Bacillus cereus UCP 1615 as Stabilizing Agent and Its Application as an Antifungal Agent

Silver nanoparticles have great potential in a wide range of applications. Therefore, the purpose of this work was to synthesize, in a simple and green way, via the Tollens method, silver nanoparticles (AgNPs), using as a stabilizer the biosurfactant produced by Bacillus cereus UCP 1615 cultivated in a low-cost medium, with waste frying oil as a substrate. The obtained nanoparticles were identified and morphologically characterized using ultraviolet/visible (UV/vis) spectroscopy, scanning electron microscopy (SEM), and zeta potential. The maximum UV/vis absorption was observed at 400 nm for newly formed silver nanoparticles, while, for silver nanoparticles stored for 120 days, the peak was observed at 430 nm. SEM micrographs confirmed the formation of nanoparticles, with predominantly spherical structures. The average size of the formed nanoparticles was estimated to be 20 nm. The presence of the biosurfactant promoted stability, as a zeta potential of −23.4 mV was observed. The antimicrobial potential of AgNPs was evaluated at different concentrations against three pathogenic fungi (Aspergillus niger, Penicillium fellutanum, and Cladosporium cladosporioides). No less than 100% and 85% inhibitions of P. fellutanum and A. niger growth were observed, respectively, at the AgNP concentration of 16.50 µg/mL in potato dextrose agar medium. These results suggest the potential use of the biosurfactant as a stabilizer for silver nanoparticles and its application as an antimicrobial agent.

Simple ApproximaTion for Aggregation Number Determination by Isothermal Titration Calorimetry: STAND-ITC

A new proposal to obtain aggregation numbers from isothermal titration calorimetry dilution experiments is described and tested using dodecyl trimethyl ammonium bromide, dodecyl methylimidazolium chloride, dodecyl methylimidazolium sulfonate, and didecyl methylimidazolium chloride aqueous solutions at different temperatures. The results were compared to those obtained from fluorescence measurements and also with data from the literature. In addition to the aggregation number, the molar free energy to transfer a solute molecule from the aggregate to the bulk solution, the enthalpy corresponding to the formation of the self-assembled suprastructures, the molar heat corresponding to the dilution of monomers and aggregates, and an offset parameter to account for unpredictable external contributions are simultaneously obtained using the same method. The new equations are compared to those obtained from previous proposals, and they are also analyzed in detail to assess the impact of each fitting parameter in the profile of the calorimetric isotherm. This new approach has been implemented in a computational code that automatically determines the fitting parameters as well as the corresponding statistical uncertainties for the large variety of calorimetric profiles that have been tested. Given the high sensitivity of the dilution experiments to the aggregation number for relatively small assemblies, our approach is proposed also to quantify the oligomerization state of biomolecules such as proteins and peptides.

Mechanism and Characteristics of Oil Recovery from Oily Sludge by Sodium Lignosulfonate Treatment

The separation of oil components from oily sludge is an important component of soil remediation and energy recovery. Therefore, establishing a green and efficient separation technology is of great significance. In this study, oily sludge was separated using sodium lignosulfonate (SL) treatment. The effects of temperature, SL concentration, rotate speed, time, and pH on the oil removal rate were studied. The optimal conditions were as follows: temperature, 30 °C; SL concentration, 2.0 g·L-1; rotate speed, 200 rpm; time, 60 min; and pH 11. The maximum oil removal rate was 83.21%. The physicochemical properties of oily sludge were analyzed. The soil was looser, and the contact angle (55°) of the soil surface was reduced. Alkanes, aldehydes, ketones, carbonic acids, benzene rings, and alicyclic ethers were removed. The result shows that the SL treatment removed a wider range of petroleum hydrocarbon and had a stronger oil removal capacity. It provides a new method for the green and efficient separation of oily sludge.

Profiling of Indigenous Biosurfactant-Producing Bacillus Isolates in the Bioremediation of Soil Contaminated by Petroleum Products and Olive Oil

Petroleum is, up to this date, an inimitable nonrenewable energy resource. Petroleum leakage, which arises during transport, storage, and refining, is the most important contaminant in the environment, as it produces harm to the surrounding ecosystem. Bioremediation is an efficient method used to treat petroleum hydrocarbon-contaminated soil using indigenous microorganisms. The degradation characteristics for a variety of hydrocarbons (hexane, benzene, gasoline, and diesel) were qualitatively and quantitatively investigated using Bacillus isolates. Microbiological and biochemical methods have been used including isolation of oil-degrading bacteria, enzymatic activities, the determination of physicochemical parameters, biosurfactant production and extraction assay, oil displacement assay, antimicrobial assay of the biosurfactants, and bioremediation kinetics. Consequently, of the 60 isolates capable of degrading different hydrocarbons at fast rates, 34 were suspected to be Bacillus isolates capable of growing in 24 h or 48 h on BH medium supplemented with 2% of hexane, benzene, gasoline, diesel, and olive oil, respectively. Among the 34 isolates, 61% (21/34) are capable of producing biosurfactant-like molecules by using gasoline, 70% (24/34) with diesel oil, 85% (29/34) with hexane, and 82% (28/34) with benzene. It was found that biosurfactant-producing isolates are extractable with HCl (100%), ammonium sulphate (95%), chloroform (95%), and ethanol (100%). Biosurfactants showed stability at 20°C, 37°C, 40°C, and 60°C. Biosurfactant secreted by Bacillus strains has shown an antagonistic effect in Escherichia coli, Shigella flexneri 5a M90T, and Bacillus cereus. The selected isolates could therefore be safely used for biodegradation. Substrate biodegradation patterns by individual isolates were found to significantly differ. The study shows that benzene was degraded faster, followed by hexane, gasoline, and finally diesel. The Bacillus consortium used can decrease hydrocarbon content from 195 to 112 (g/kg) in 15 days.

Crude oil biodegradation potential of biosurfactant-producing Pseudomonas aeruginosa and Meyerozyma sp

This study investigates the potential of crude oil degrading capabilities of biosurfactant-producing strains of Pseudomonas aeruginosa MF069166 and Meyerozyma sp. MF138126. P. aeruginosa produced mono-/di-rhamnolipids congeners whereas, Meyerozyma sp. produced acidic and lactonic forms of sophorolipids with crude oil. The values of critical micelle concentrations of rhamnolipids and sophorolipids were 40 mg/L and 50 mg/L with reductions in surface tension of water to 29 mN/m and 33 mN/m. Dynamic light scattering revealed that the average diameter of micellar aggregates of rhamnolipids ranged between 300 and 350 nm and the average size of sophorolipids micelles was 309 nm and 380 nm. Biosurfactants from P. aeruginosa and Meyerozyma sp. exhibited emulsification activities of 87% and 84% in crude oil. Cell surface hydrophobicity of both strains was higher in the presence of hydrophobic contaminants. The biosurfactants showed stability under varying pH, NaCl concentrations and temperatures. Gravimetric and GC-MS analyses demonstrated that P. aeruginosa degraded 91% of the petroleum hydrocarbons while Meyerozyma sp. showed 87% biodegradation efficiency. P. aeruginosa and Meyerozyma sp. have also been found to degrade halogen-containing compounds and showed excellent crude oil degradation efficiency. It is concluded that both strains have high potential of applications in the bioremediation of hydrocarbons-contaminated sites.

Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils

Heavy metal toxicity has become a pressing ecological problem that affects the ecosystems through bioaccumulation, representing a serious public health hazard. Many conventional strategies have been developed and applied to decontaminate and restore metal-contaminated areas. However, these conventional approaches are not very suitable and environmentally safe for heavy metal remediation because of their high operational costs, high energy requirements, post-waste disposal problems, and secondary pollutant generation. Thus, biosurfactant-based bioremediation of heavy metals is a sustainable and promising approach because of its biodegradation capability, economic effectiveness, and ecofriendly nature. Pseudomonas sp., Bacillus sp., Citrobacter freundii, and Candida tropicalis have been isolated as potential sources of biosurfactants and produce compounds such as surfactin, rhamnolipids, and sophorolipids. Owing to the severity of heavy metal pollution in certain parts of the environment, biosurfactants have garnered great interest and attention as an emerging multi-functional technology of the new century for successful removal of heavy metal pollutants. The present study describes the role of biosurfactants in the bioremediation of heavy metals from contaminated environments. Moreover, the interaction mechanism underlying biosurfactant-metal complexation and metal remediation are discussed. Based on the review of the literature, further research is warranted to elucidate the mechanistic roles and explore the structural characterization and gene regulation of biosurfactants to improve their productivity and expand their applicability in bioremediation.

Application of Green Surfactants in the Remediation of Soils Contaminated by Hydrocarbons

Among the innovative technologies utilized for the treatment of contaminated soils, the use of green surfactants appears to be a biocompatible, efficient, and attractive alternative, since the cleaning processes that normally use synthetic surfactants as additives cause other problems due to toxicity and the accumulation of by-products. Three green surfactants, i.e., two biobased (biobased 1 and biobased 2) surfactants produced by chemical synthesis and a microbial surfactant produced from the yeast Starmerella bombicola ATCC 22214, were used as soil remediation agents and compared to a synthetic surfactant (Tween 80). The three surfactants were tested for their ability to emulsify, disperse, and remove different hydrophobic contaminants. The biosurfactant, which was able to reduce the water surface tension to 32.30 mN/m at a critical micelle concentration of 0.65 g/L, was then used to prepare a commercial formulation that showed lower toxicity to the tested environmental bioindicators and lower dispersion capacity than the biobased surfactants. All the green surfactants showed great emulsification capacity, especially against motor oil and petroleum. Therefore, their potential to remove motor oil adsorbed on different types of soils (sandy, silty, and clay soil and beach sand) was investigated either in kinetic (flasks) or static (packed columns) experiments. The commercial biosurfactant formulation showed excellent effectiveness in removing motor oil, especially from contaminated sandy soil (80.0 ± 0.46%) and beach sand (65.0 ± 0.14%) under static conditions, while, in the kinetic experiments, the commercial biosurfactant and the biobased 2 surfactant were able to remove motor oil from all the contaminated soils tested more effectively than the biobased 1 surfactant. Finally, the S. bombicola commercial biosurfactant was evaluated as a soil bioremediation agent. In degradation experiments carried out on motor oil-contaminated soils enriched with sugarcane molasses, oil degradation yield in the sandy soil reached almost 90% after 60 days in the presence of the commercial biosurfactant, while it did not exceed 20% in the presence of only S. bombicola cells. These results promise to contribute to the development of green technologies for the treatment of hydrophobic pollutants with economic gains for the oil industries.

Micellization of Rhamnolipid Biosurfactants and Their Applications in Oil Recovery: Insights from Mesoscale Simulations

The dissipative particle dynamics (DPD) mesoscopic method is used to investigate the self-assembly of rhamnolipid congeners and their aggregation behaviors with paraffins including nonane and pentadecane. The coarse-grained force field is parameterized by combining molecular dynamics (MD) simulations, COSMOtherm calculations, and available experimental data. This model reproduces the vesicular formation of α-l-rhamnopyranosyl-β-hydroxydecanoyl-β-hydroxydecanoate (Rha-C10-C10) reported by all-atom MD simulations. The vesicle composed of Rha-C10-C10 is found to be most stable at a surfactant concentration of 100-146 mM based on asphericity analysis. The architecture of rhamnolipid congeners affects the morphology of their aggregates. Di-rhamno-di-lipidic dRha-C16-C16 forms vesicles with a thicker unilamellar layer of 3.2 nm. Rha-C16-C16 forms vesicles at a lower concentration of 70 mM, but the enclosed water space collapses when the surfactant concentration increases. dRha-C10-C10 forms wormlike micelles, which agglomerate into a torus and interconnected network at higher concentrations. In the presence of alkane molecules, dRha-C10-C10 maintains its wormlike micellar morphology with alkane molecules wrapped inside the aggregates. For Rha-C10-C10, Rha-C16-C16, and dRha-C16-C16, nonane molecules are distributed in the hydrophobic subdomain formed by rhamnolipid molecules. Spherical vesicles are formed at a surfactant concentration of 50 mM and then develop into ellipsoidal vesicles when the concentration increases to 125 mM. When mixed with pentadecane, the alkane molecules are aggregated and surrounded by surfactants forming a core-shell structure at a low surfactant concentration of 20 mM. At higher alkane and surfactant concentrations, the morphologies develop into disk micelles, wormlike micelles, and vesicles, with pentadecane molecules being distributed and packed with rhamnolipids. The obtained simulation results suggest that these biosurfactants have potential as environmental remediation agents.

Biotechnology for carbon capture and fixation: Critical review and future directions

To mitigate the growing threat of climate change and develop novel technologies that can eliminate carbon dioxide, the most abundant greenhouse gas derived from the flue gas stream of the fossil fuel-fired power stations, is momentous. The development of carbon capture and sequestration-based technologies may play a significant role in this regard. Carbon fixation mostly occurs by photosynthesizing plants as well as photo and chemoautotrophic microbes that turn the atmospheric carbon dioxide into organic materials via their enzymes. Biofuel can offer a sustainable solution for carbon mitigation. The pragmatic implementation of biofuel production processes is neither cost-effective nor has been proven safe over the long term. Searching for ways to enhance biofuel generation by the employment of genetic engineering is vital. Carbon biosequestration can help to curb the greenhouse effect. In addition, new genomic approaches, which are able to use gene-splicing biotechnology techniques and recombinant DNA technology to produce genetically modified organisms, can contribute to improvement in sustainable and renewable biofuel and biomaterial production from microorganisms. Biopolymers, Biosurfactants, and Biochars are suggested as sustainable future trends. This study aims to pave the way for implementing biotechnology methods to capture carbon and decrease the demand and consumption of fossil fuels as well as the emissions of greenhouse gases. Having a better image of microorganisms' potential role in carbon capture and storage can be prolific in developing powerful techniques to reduce CO₂ emissions.

Evaluation of Calcium Alginate-Based Biopolymers as Potential Component of Membranes for Recovering Biosurfactants from Corn Steep Water

Corn steep water (CSW) is a complex agro-food stream that is used as a source of cost-competitive biosurfactants, since they are produced spontaneously in the steeping process of corn, avoiding production costs. Nevertheless, the extraction of biosurfactants from CSW using sustainable processes is still a challenge. Consequently, the use of calcium alginate membranes could present a novel and sustainable technology for recovering biosurfactants from aqueous streams. Therefore, the aim of this work is to evaluate calcium alginate-based biopolymers, without and with the presence of grape marc as an additive, as a key component of membranes for the recovery of biosurfactants in corn steep water. Biosurfactants are present in CSW, together with other inorganic solutes and biomolecules, such as organic acids, sugars, cations, anions as well as metals. Hence, the competition of these mentioned compounds for the active sites of the calcium alginate-based biopolymers was high. However, they showed a good adsorption capacity for biosurfactants, recovering around 55 ± 2% and 47 ± 1%, of biosurfactants from CSW using both calcium alginate-based biopolymers, with and without biodegraded grape marc. Regarding adsorption capacity, it was 54.8 ± 0.6 mg biosurfactant/g bioadsorbent for the biopolymer containing grape marc, and 46.8 ± 0.4 mg biosurfactant/g bioadsorbent for the calcium alginate-based biopolymer alone. Based on these results, it could be postulated that the formulation of green membranes, based on calcium alginate-based polymers, could be an interesting alternative for the recovery of biosurfactants from aqueous streams including CSW.

Isolation and Characterization of Biosurfactant-Producing Bacteria from Amapaense Amazon Soils

The objective of this research was to perform screening of biosurfactant-producing bacteria from Amapaense Amazon soils. Floodplain- and upland-forest soils of three municipalities of the Amapá state were isolated and identified. The isolates were cultured in nutrient broth with olive oil, and their extracts were evaluated according to drop collapse, oil dispersion, emulsification, and surface tension tests. From three hundred and eighteen isolates, the 43 bacteria were selected and identified by 16S rDNA gene sequencing, indicating the presence of three different genera, Serratia, Paenibacillus, and Citrobacter. The extracellular biosurfactant production pointed out the 15 most efficient bacteria that presented high emulsification capacity (E₂₄ > 48%) and stability (less than 10% of drop after 72 h) and great potential to reduce the surface tension (varying from 49.40 to 34.50 mN·m⁻¹). Cluster analysis classified genetically related isolates in different groups, which can be connected to differences in the amount or the sort of biosurfactants. Isolates from Serratia genus presented better emulsification capacity and produced a more significant surface tension drop, indicating a promising potential for biotechnological applications.

Biosurfactants: Properties and Applications in Drug Delivery, Biotechnology and Ecotoxicology

Surfactants are amphiphilic compounds having hydrophilic and hydrophobic moieties in their structure. They can be of synthetic or of microbial origin, obtained respectively from chemical synthesis or from microorganisms’ activity. A new generation of ecofriendly surfactant molecules or biobased surfactants is increasingly growing, attributed to their versatility of applications. Surfactants can be used as drug delivery systems for a range of molecules given their capacity to create micelles which can promote the encapsulation of bioactives of pharmaceutical interest; besides, these assemblies can also show antimicrobial properties. The advantages of biosurfactants include their high biodegradability profile, low risk of toxicity, production from renewable sources, functionality under extreme pH and temperature conditions, and long-term physicochemical stability. The application potential of these types of polymers is related to their properties enabling them to be processed by emulsification, separation, solubilization, surface (interfacial) tension, and adsorption for the production of a range of drug delivery systems. Biosurfactants have been employed as a drug delivery system to improve the bioavailability of a good number of drugs that exhibit low aqueous solubility. The great potential of these molecules is related to their auto assembly and emulsification capacity. Biosurfactants produced from bacteria are of particular interest due to their antibacterial, antifungal, and antiviral properties with therapeutic and biomedical potential. In this review, we discuss recent advances and perspectives of biosurfactants with antimicrobial properties and how they can be used as structures to develop semisolid hydrogels for drug delivery, in environmental bioremediation, in biotechnology for the reduction of production costs and also their ecotoxicological impact as pesticide alternative.

Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products

Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review focuses specifically on the differences created by using raw cooking oil or waste cooking oil as the substrate on the ability of various yeast species to synthesize sophorolipids, rhamnolipids, mannosylerythritol lipids, and other glycolipids and the substrate’s impact on the composition, properties, and limitations in the application of biosurfactants.

Identification and Biochemical Characterization of a Surfactant-Tolerant Chondroitinase VhChlABC from Vibrio hyugaensis LWW-1

Chondroitinases, catalyzing the degradation of chondroitin sulfate (CS) into oligosaccharides, not only play a crucial role in understanding the structure and function of CS, but also have been reported as a potential candidate drug for the treatment of high CS-related diseases. Here, a marine bacterium Vibrio hyugaensis LWW-1 was isolated, and its genome was sequenced and annotated. A chondroitinase, VhChlABC, was found to belong to the second subfamily of polysaccharide lyase (PL) family 8. VhChlABC was recombinant expressed and characterized. It could specifically degrade CS-A, CS-B, and CS-C, and reached the maximum activity at pH 7.0 and 40 °C in the presence of 0.25 M NaCl. VhChlABC showed high stability within 8 h under 37 °C and within 2 h under 40 °C. VhChlABC was stable in a wide range of pH (5.0~10.6) at 4 °C. Unlike most chondroitinases, VhChlABC showed high surfactant tolerance, which might provide a good tool for removing extracellular CS proteoglycans (CSPGs) of lung cancer under the stress of pulmonary surfactant. VhChlABC completely degraded CS to disaccharide by the exolytic mode. This research expanded the research and application system of chondroitinases.

Isolation, screening and molecular characterization of biosurfactant producing bacteria from soil samples of auto repair shops

A total of 107 bacterial strains were isolated from used motor oil contaminated soil samples from auto-repair shops. The isolates were evaluated for their biosurfactant production abilities by employing a series of screening techniques, including hemolytic assay, oil displacement assay, drop-collapse assay, and parafilm M test. The potential biosurfactant producers were characterized by 16S rDNA-based molecular tools and were identified as Proteus mirabilis, Klebsiella pneumoniae, Enterobacter cloacae, Micrococcus sp., Citrobacter sp., and Bacillus sp. The widest clearing zone with a diameter of 6.5 cm was observed upon the addition of cell-free supernatant (CFS) from P. mirabilis SLM-B52 as assayed by the oil displacement test. Remarkable emulsification indexes, equivalent to 42% (against kerosene), 53% (against xylenes), and 50% (against benzene and toluene), were recorded by the CFSs of Micrococcus sp. SLM-B28, P. mirabilis SLM-B85, and K. pneumoniae SLM-B46, respectively. Du Noüy tensiometer analysis showed that biosurfactant produced by P. mirabilis SLM-B52 has the highest surface tension reduction capacity with a value of 30.5 mN m^-1. The emulsifying activity of a CFS from P. mirabilis was also described in this study for the first time. Taking together, biosurfactants from promising bacterial strains have potential application in microorganism-based biodegradation processes of hydrocarbons which cause detrimental effects on the environment.

A critical review on various feedstocks as sustainable substrates for biosurfactants production: a way towards cleaner production

The quest for a chemical surfactant substitute has been fuelled by increased environmental awareness. The benefits that biosurfactants present like biodegradability, and biocompatibility over their chemical and synthetic counterparts has contributed immensely to their popularity and use in various industries such as petrochemicals, mining, metallurgy, agrochemicals, fertilizers, beverages, cosmetics, etc. With the growing demand for biosurfactants, researchers are looking for low-cost waste materials to use them as substrates, which will lower the manufacturing costs while providing waste management services as an add-on benefit. The use of low-cost substrates will significantly reduce the cost of producing biosurfactants. This paper discusses the use of various feedstocks in the production of biosurfactants, which not only reduces the cost of waste treatment but also provides an opportunity to profit from the sale of the biosurfactant. Furthermore, it includes state-of-the-art information about employing municipal solid waste as a sustainable feedstock for biosurfactant production, which has not been simultaneously covered in many published literatures on biosurfactant production from different feedstocks. It also addresses the myriad of other issues associated with the processing of biosurfactants, as well as the methods used to address these issues and perspectives, which will move society towards cleaner production.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Biosurfactants produced from corncob: a bibliometric perspective of a renewable and promising substrate

The reuse of agro-industrial waste has been a recurring issue since the 20th century. With a composition rich in carbohydrates and because of the massive amount of residue produced daily all over the world, corncob became a low-cost and suitable substrate to produce high added-value compounds. Biosurfactants are bioproducts of versatile applications due to their chemical structure with hydrophilic and hydrophobic regions. The current work performed a bibliometric analysis to identify research related to the synthesis of biosurfactants using corncob as substrate. Despite the high availability of corncobs, only nine articles were found in Scopus and Web of Science using different pretreatment processes and microorganisms. After an initial screening, data regarding research organizations, scientific journals, citations, countries, institutions, and keywords were analyzed. Results indicated that corncobs were also used to produce enzymes, adsorbents, activated carbon, and furfural. The presented evaluation updated the status of art, identifying a serious need for more research, especially because of corncob's high potential to provide fermentable sugars and the wide range of variables influencing fermentation processes that still need to be studied. A future association of this low-cost substrate with other methods can result in a promising scenario for technology transference.

Assessment of polyethylene degradation by biosurfactant producing ligninolytic bacterium

Accumulation of plastic waste has become an environmental threat and a global problem. In this research, polyethylene degrading ligninolytic bacteria were isolated from plastic waste polluted soil. Two bacterial isolates, namely PE2 and PE3 have been obtained from the soil samples. Polyethylene degrading ability of the isolates has been assessed individually in a synthetic media containing polyethylene as a carbon source. The results indicated that maximum weight reduction of polyethylene (6.68%) was found in PE3 inoculated media after thirty days of incubation. Fourier Transform Infrared Spectroscopic results showed the appearance of carbonyl peaks. 16S rRNA gene sequencing studies revealed that the potential isolate PE3 belongs to the genus Bacillus and it was named Bacillus sp. strain PE3. From the scanning electron microscopic results, it is inferred that Bacillus sp. strain PE3 could colonize on the polyethylene surface and form a biofilm. Besides, the viable Bacillus sp. strain PE3 on polyethylene surface was confirmed by fluorescence microscopic analysis. Alkanes and fatty acids were identified in the degraded products by gas chromatography-mass spectrometer analysis. From the results of native polyacrylamide gel electrophoresis, the activities of laccase and lignin peroxidase were noticed. Furthermore, extracellular production of biosurfactant has been observed in the Bacillus sp. strain PE3 inoculated mineral salt media and synthetic media with glucose and polyethylene as the carbon source respectively. The characterization studies of crude biosurfactant have confirmed that lipopeptide nature biosurfactant. The present study demonstrates that the ligninolytic enzymes laccase, lignin peroxidase, and lipopeptide type biosurfactant are produced by Bacillus sp. strain PE3 in the media with polyethylene as a carbon source.

Iron-Stimulated Production and Antimicrobial Potential of a Novel Biosurfactant Produced by a Drilling Waste-Degrading Pseudomonas citronellolis Strain

A Pseudomonas citronellolis strain was isolated from drilling waste (DW). This strain utilizes DW as the sole energy and carbon source to produce biosurfactants (BSs). The BS produced was thermally stable, amorphous and includes a peptide structure. FeSO4, FeCl3 and Fe(NO3)3 were supplemented at various concentration levels to assess possible enhancement of BS production and DW biodegradation. The limit concentration of Fe compounds between the increase in BS formation and microbial toxicity was 0.1 mM. FeCl3 enhanced DW biodegradation and more than doubled the BS formation yield, determining an optimization strategy for BS production. The BS was then partially purified and used against several Gram-negative and positive multi-drug resistant bacteria (such as Klebsiella pneumoniae, Pseudomonas aeruginosa, Escherichia coli spp, Acinetobacter baumaniii, Enterococcus faecalis spp, Streptococcus pneumoniae, Staphylococcus aureus, Salmonella enterica). The minimum inhibitory concentration was defined at a range of 0.25 to 10 mg/mL. The antimicrobial properties of the partially purified BS established its effectiveness and suggested a down-stream processing cost reduction, as no additional purification steps were necessary. The study could lead to a sustainable low-cost bioprocess towards a circular bioeconomy because waste, a non-expensive substrate, is used; while the BS holds great potential as a novel compound with antibiotic and disinfectant-like action, following toxicity testing with human cells.

Regulatory status quo and prospects for biosurfactants in pharmaceutical applications

The concept of going 'green' and 'cold' has led to utilizing renewable resources for the synthesis of microbial biosurfactants that are both patient and eco-friendly. In this review, we shed light on the potential and regulatory aspects of biosurfactants in pharmaceutical applications and how they can significantly contribute to novel concepts for the Coronavirus 2019 (COVID-19) vaccine and future treatment. We emphasize that more specific guidelines should be formulated to regulate the approval of biosurfactants for human use. It is also crucial to implement a risk-based approach from the early research and development (R&D) phase in addition to establishing more robust standardized techniques and assays to evaluate the characteristics of biosurfactants.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Microbial glycoconjugates in organic pollutant bioremediation: recent advances and applications

The large-scale application of organic pollutants (OPs) has contaminated the air, soil, and water. Persistent OPs enter the food supply chain and create several hazardous effects on living systems. Thus, there is a need to manage the environmental levels of these toxicants. Microbial glycoconjugates pave the way for the enhanced degradation of these toxic pollutants from the environment. Microbial glycoconjugates increase the bioavailability of these OPs by reducing surface tension and creating a solvent interface. To date, very little emphasis has been given to the scope of glycoconjugates in the biodegradation of OPs. Glycoconjugates create a bridge between microbes and OPs, which helps to accelerate degradation through microbial metabolism. This review provides an in-depth overview of glycoconjugates, their role in biofilm formation, and their applications in the bioremediation of OP-contaminated environments.