A comprehensive review on innovative and advanced stabilization approaches of anthocyanin by modifying structure and controlling environmental factors

Enhancing the Stability of Strawberry Anthocyanins Complexed to β-Cyclodextrin and Starch toward Heat, Oxidation, and Irradiation

The instability of anthocyanins limits their application in food supplementation and in the food industry. Stabilities of strawberry anthocyanins (AN) were improved by complexation with both β-CD and starch against heat, H2O2, light, and UV irradiation. The stability of AN against H2O2 (2.21 mM) dropped (<20%) in 6 h but was enhanced in β-CD (49.32%) and starch (96.84%) complexes. Under light conditions, AN in the solid and solution (3.88 g/100 mL) forms degraded to 36.49 and 11.11%, while β-CD and starch complexes displayed stabilities of 98.20 and 91.76%, respectively, after 60 days. Under UV irradiation, AN showed similar instability where both AN forms expressed stabilities of 36.75 and 66.18%, respectively, after 168 h, while β-CD and starch complexes exhibited 51.13 and 40.10%, respectively. LC-MS-ESI showed that photoirradiation of both destroyed the full conjugation of the flavylium ring of the major components, pelargonidin and cyanidin hexoses; the mechanism was proposed. Docking binding models of major AN components in β-CD were obtained.

First Insights on the Bioaccessibility and Absorption of Anthocyanins from Edible Flowers: Wild Pansy, Cosmos, and Cornflower

Edible flowers are regaining interest among both the scientific community and the general population, not only for their appealing sensorial characteristics but also from the growing evidence about their health benefits. Among edible flowers, those that contain anthocyanins are among the most consumed worldwide. However, little is known regarding the bioaccessibility and absorption of their bioactive compounds upon ingestion. The aim of this work was to explore, for the first time, the behavior of anthocyanin-rich extracts from selected edible flowers under different food processing conditions and after ingestion using simulated digestions, as well as their absorption at the intestinal level. Overall, the results showed that the monoglucoside and rutinoside anthocyanin extracts were less stable under different pH, temperature, and time conditions as well as different digestive processes in the gastrointestinal tract. There was a prominent decrease in the free anthocyanin content after the intestinal phase, which was more pronounced for the rutinoside anthocyanin extract (78.41% decrease from the oral phase). In contrast, diglucoside and rutinoside anthocyanin extracts showed the highest absorption efficiencies at the intestinal level, of approximately 5% after 4 h of experiment. Altogether, the current results emphasize the influence of anthocyanins' structural arrangement on both their chemical stability as well as their intestinal absorption. These results bring the first insights about the bioaccessibility and absorption of anthocyanins from wild pansy, cosmos, and cornflower and the potential outcomes of such alternative food sources.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

The structure of anthocyanins and the copigmentation by common micromolecular copigments: A review

Under natural physiological conditions, anthocyanins can keep bright and stable color for a long time due to the relatively stable acid-base environment of plant vacuoles and the copigmentation from various copigment substances, such as polyphenols, nucleotides, metallic ions and other substances. Therefore, the copigmentation caused by copigments is considered an effective way to stabilize anthocyanins against adverse environmental conditions. This is attributed to the covalent and noncovalent interactions between colored forms of anthocyanins (flavylium ions and quinoidal bases) and colorless or pale yellow organic molecules (copigments). These interactions are usually manifested in both hyperchromic effect and bathochromic shifts. In addition to making anthocyanins more stable, the copigmentation also could make an important contribution to the diversification of their tone. Based on the molecular structure of anthocyanins, this review focuses on the interaction mode of auxochrome groups or copigments with anthocyanins and their effects on the chemical and color stability of anthocyanins.

Mechanism of action of anthocyanin on the detoxification of foodborne contaminants-A review of recent literature

Foodborne contaminants refer to substances that are present in food and threaten food safety. Due to the progress in detection technology and the rising concerns regarding public health, there has been a surge in research focusing on the dangers posed by foodborne contaminants. These studies aim to explore and implement strategies that are both safe and efficient in mitigating the associated risks. Anthocyanins, a class of flavonoids, are abundantly present in various plant species, such as blueberries, grapes, purple sweet potatoes, cherries, mulberries, and others. Numerous epidemiological and nutritional intervention studies have provided evidence indicating that the consumption of anthocyanins through dietary intake offers a range of protective effects against the detrimental impact of foodborne contaminants. The present study aims to differentiate between two distinct subclasses of foodborne contaminants: those that are generated during the processing of food and those that originate from the surrounding environment. Furthermore, the impact of anthocyanins on foodborne contaminants was also summarized based on a review of articles published within the last 10 years. However, further investigation is warranted regarding the mechanism by which anthocyanins target foodborne contaminants, as well as the potential impact of individual variations in response. Additionally, it is important to note that there is currently a dearth of clinical research examining the efficacy of anthocyanins as an intervention for mitigating the effects of foodborne pollutants. Thus, by exploring the detoxification effect and mechanism of anthocyanins on foodborne pollutants, this review thereby provides evidence, supporting the utilization of anthocyanin-rich diets as a means to mitigate the detrimental effects of foodborne contaminants.

Enhancing the stability of natural anthocyanins against environmental stressors through encapsulation with synthetic peptide-based gels

The instability of anthocyanin to environmental stressors severely limits its applications as a natural bioactive pigment. To overcome these limitations, this proof-of-concept study utilizes the high biocompatibility of peptide molecules and the unique gel microstructure to develop innovative peptide-based gels. Characterization of the gels was conducted through AFM, SEM, rheological analysis, and CD spectrum. These analyses confirmed the fibrous mesh structure and impressive mechanical strength of the peptide-based gels. The cytotoxicity evaluation using MTT and hemolysis analysis showed high biocompatibility. Encapsulation efficiency analysis and fluorescence microscopy images demonstrated successful and efficient encapsulation of anthocyanins in all four peptide-based gels, with uniform distribution. Moreover, systematic investigations were conducted to assess the impact of peptide-based gels on the stability of natural anthocyanins under environmental stressors such as temperature, pH variations, and exposure to metal ions. Notably, the results revealed a significant enhancement in stability, including improved long-term storage and antioxidant activity. In conclusion, this study successfully developed four novel peptide-based gels that effectively protect natural anthocyanins from environmental stressors, highlighting their potential in various fields such as food and biology.

Advances in embedding techniques of anthocyanins: Improving stability, bioactivity and bioavailability

The health benefits of anthocyanins have attracted extensive research interest. However, anthocyanins are sensitive to certain environmental and gastrointestinal conditions and have low oral bioavailability. It has been reported that delivery systems made in different ways could improve the stability, bioavailability and bioactivity of anthocyanins. This present review summarizes the factors affecting the stability of anthocyanins and the reasons for poor bioavailability, and various technologies for encapsulation of anthocyanins including microcapsules, nanoemulsions, microemulsions, Pickering emulsions, nanoliposomes, nanoparticles, hydrogels and co-assembly with amphiphilic peptides were discussed. In particular, the effects of these encapsulation technologies on the stability, bioavailability and bioactivities of anthocyanins in vitro and in vivo experiments are reviewed in detail, which provided scientific insights for anthocyanins encapsulation methods. However, the application of anthocyanins in food industry as well as the biological fate and functional pathways in vivo still need to be further explored.

Interaction between a Commercial Mannoprotein and Cyanidin-3-O-glucoside-4-vinylphenol and Its Stability and Antioxidative Properties as a Novel Functional Pigment

Hydroxyphenyl-pyranoanthocyanins, which are derived from anthocyanins and phenolic acids during the fermentation and aging of red wine, are prone to polymerization and precipitation, which largely limits their application and bioactivity research. In the present study, cyanidin-3-O-glucoside-4-vinylphenol (C3GVP), a hydroxyphenyl-pyranoanthocaynin, was prepared from C3G and p-coumaric acid, and mannoprotein (MP) was employed to improve its stability in various complex solvents by forming a stable anthocyanin-MP complex. We used scanning electron microscopy, ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, and circular dichroism spectroscopy to observe structural changes in C3GVP and MP. The results demonstrated that the intermolecular polymerization of C3GVP was mitigated and the secondary conformation of MP was changed slightly. Fluorescence spectroscopy and molecular docking indicated that C3GVP and MP interacted via hydrogen bonds and hydrophobic interactions. Importantly, the C3GVP-MP complex exhibited better thermal stability and antioxidant capacity than C3G.

Vitisin A, as a Type of Pyranoanthocyanin, Suppresses Inflammation by Restricting Hematopoietic Stem Cell Differentiation toward Monocytes in Bone Marrow

Hematopoietic stem and progenitor cells (HSPCs) could be differentiated into mature myeloid and lymphoid cells, maintaining the requirements of immune cells. Atherosclerosis and ulcerative colitis (UC) drive HSPC homeostasis destruction, which triggers expansive HSPC proliferation and Ly6Chi monocyte production, contributing to aggravated inflammation. Vitisin A belongs to the anthocyanin derivatives with excellent stability and bioactivity in vitro. However, there is no report about the anti-inflammation of Vitisin A via reprogramming HSPC differentiation toward monocytes. In this study, we found that Vitisin A presents anti-inflammatory ability during the development of atherosclerosis and UC by depressing Ly6Chi monocyte production from bone marrow. This performance depended on restricted HSPC differentiation, which suggested that Vitisin A participated in monocyte generation and carried out the immunomodulation. Together, Vitisin A ameliorates inflammation during atherosclerosis and UC via the suppressed differentiation of HSPCs toward monocytes, which could be considered an ideal functional component with immunomodulatory effects.

Protein and Peptide-Based Nanotechnology for Enhancing Stability, Bioactivity, and Delivery of Anthocyanins

Anthocyanin, a unique natural polyphenol, is abundant in plants and widely utilized in biomedicine, cosmetics, and the food industry due to its excellent antioxidant, anticancer, antiaging, antimicrobial, and anti-inflammatory properties. However, the degradation of anthocyanin in an extreme environment, such as alkali pH, high temperatures, and metal ions, limits its physiochemical stabilities and bioavailabilities. Encapsulation and combining anthocyanin with biomaterials could efficiently stabilize anthocyanin for protection. Promisingly, natural or artificially designed proteins and peptides with favorable stabilities, excellent biocapacity, and wide sources are potential candidates to stabilize anthocyanin. This review focuses on recent progress, strategies, and perspectives on protein and peptide for anthocyanin functionalization and delivery, i.e., formulation technologies, physicochemical stability enhancement, cellular uptake, bioavailabilities, and biological activities development. Interestingly, due to the simplicity and diversity of peptide structure, the interaction mechanisms between peptide and anthocyanin could be illustrated. This work sheds light on the mechanism of protein/peptide-anthocyanin nanoparticle construction and expands on potential applications of anthocyanin in nutrition and biomedicine.

Rice bran protein increases the retention of anthocyanins by acting as an encapsulating agent in the spray drying of grape juice

Rice bran protein concentrate (RPC), an industrial by-product, may emerge as a green alternative for substituting animal proteins in microencapsulating compounds of interest. This study applied RPC, combined with maltodextrin (MD) as carrier agents, in the spray drying of grape juice, a product rich in these bioactive compounds, seeking to protect anthocyanins from degradation. The effects of carrier agent concentration [C: 0.75, 1.00, and 1.25 g of carrier agents (CA)/g of soluble solids of the juice (SS)] and RPC:CA ratio (P: 0%, as a control sample, 5%, 10%, 15%, and 20%) on anthocyanin retention and powder properties were evaluated. At 1.00 g CA/g SS, the internal and total retentions of anthocyanins improved by 2.4 and 3.2 times, respectively, when the RPC:CA ratio increased from 0% to 20%. The protein also exhibited excellent surface activity on the grape juice and positively influenced the physicochemical properties of the microparticles. There was a reduction in stickiness, degree of caking, and hygroscopicity, in addition to an increased antioxidant capacity when protein was used in combination with MD, especially at 1.00 and 1.25 g CA/g SS. Therefore, this study demonstrated that RPC could enhance the protection of anthocyanins during the spray drying of grape juice.

Alginate microbeads incorporated with anthocyanins from purple corn (Zea mays L.) using electrostatic extrusion: Microencapsulation optimization, characterization, and stability studies

Microencapsulation of purple corn anthocyanins was carried out via an electrostatic extruder using alginate as a wall material. The influence of alginate concentration (1-2 %), extract concentration (20-30 %), and extrusion voltage (3-5 kV) on encapsulation efficiency and mean particle size was evaluated using response surface methodology. Optimal conditions were obtained to produce two different extract-loaded microbeads. Microbeads with the highest encapsulation efficiency (EE) and minimum particle size were achieved at 1 % alginate, 20 % extract, and 5 kV extrusion voltage (EEC3G = 70.26 %, EETPC = 91.59 %, particle size = 1.29 mm). In comparison, the microbeads with the efficient entrapment and maximum particle size were obtained at 1 % alginate, 26 % extract, and 3 kV (EEC3G = 81.15 %, EETPC = 91.01 %, particle size = 1.87 mm). Brunauer-Emmett-Teller (BET) surface area, pore size, and pore volume decreased after the inclusion of extract, with the lowest values reported for the smallest microbeads containing the extract. Scanning electron microscopy confirmed the results obtained by BET method and demonstrated fewer cracks and lower shrinkage of encapsulated samples. Fourier-transform infrared results proved the presence of anthocyanins and further possible interactions between phenolics and alginate. Stability studies revealed the color maintenance of anthocyanins-loaded microbeads during 4 weeks of storage at 4 °C and 8 °C. Moreover, the small and large particles showed a 7.6 and 3.4-fold reduction in degradation rate at 4 °C compared to their unencapsulated counterparts. Anthocyanins-loaded alginate microbeads retained over 80 % of cyanidin-3-glucoside at 4 °C and 8 °C, suggesting a promising potential of optimized microbeads for intelligent packaging applications.

In vitro and in vivo bioaccessibility, antioxidant activity, and color of red radish anthocyanins as influenced by different drying methods

This study aims to examine the effects of various drying methods, namely vacuum freeze drying (VFD), vacuum drying (VD), hot air drying (HAD), sun drying (SD), and air-impingement jet drying (AIJD), on in vitro and in vivo bioaccessibility of red radish anthocyanins. By color parameters, VFD- and AIJD-dried red radish showed redder color to HAD-, SD-, and VD-dried red radish. SEM images of dried red radish showed multiple holes and loose interior structure. Forty-six anthocyanins were identified in red radish. Original, in vitro and in vivo digestive samples from VFD-dried red radish contained more anthocyanins and were more bioaccessibility than fresh and other dried red radishes. In vitro and in vivo research revealed that dried red radish showed weaker and stronger FRAP and ABTS·+ scavenging activities than fresh red radish. Colon content of mice had significantly higher FRAP and ABTS·+ scavenging activities than the stomach, small intestine, and cecum contents.

Interaction of preheated whey protein isolate with rose anthocyanin extracts in beverage model system: Influence on color stability, astringency and mechanism

Preheating proteins have the potential to improve anthocyanin stability. Our aim was to investigate the effect of preheated whey protein isolate (WPI) on the color stability and astringency of the beverage model system in the presence of rose anthocyanin extracts (RAEs), and to explore the mechanism of interaction between preheated WPI and RAEs. The secondary structure, particle size and transparency of WPI were obviously changed by preheating. WPI preheated at 100°C  (WPI100) could effectively improve the color stability of RAEs in the beverage model system. Importantly, the WPI100-RAEs in the beverage model system exhibited the smallest particle size and the weakest astringency effect. In addition, different preheated WPIs could interact with RAEs non-covalently, and the interaction forces are hydrogen bonding and van der Waals forces, among which WPI100 had the strongest binding ability to RAEs. These results will provide a new insight into the development of protein-anthocyanin beverages.

High-efficiency foam fractionation of anthocyanin from perilla leaves using surfactant-free active Al2O3 nanoparticle as collector and frother: Performance and mechanism

Anthocyanin (ACN) is a natural pigment with significant industrial applications. However, foam fractionation of ACN from perilla leaves extract presents theoretical challenges due to its limited surface activity and foaming capacity. This work developed a surfactant-free active Al₂O₃ nanoparticle (ANP) as a collector and frother, which was modified with adipic acid (AA). The ANP-AA efficiently collected ACN through the electrostatic interaction, condensation reaction, and hydrogen bonding, with a Langmuir maximum capacity of 129.62 mg/g. Moreover, ANP-AA could form a stable foam layer by irreversibly adsorbing on the gas-liquid interface, reducing surface tension, and alleviating liquid drainage. Under the appropriate conditions of ANP-AA 400 mg/L and pH 5.0, we achieved a high ACN recovery of 95.68% with an enrichment ratio of 29.87 after ultrasound-assisted extraction of ACN from perilla leaves. Additionally, the recovered ACN displayed promising antioxidant properties. These findings hold significant importance in the food, colorant, and pharmaceutical industries.

Stability of Purple Corn Anthocyanin Encapsulated by Maltodextrin, and Its Combinations with Gum Arabic and Whey Protein Isolate

Purple corn anthocyanins are important natural colourants with cheap prices and rich bioactivities. However, their stability is limited. Microencapsulation is an effective way to improve anthocyanin stability and the influence of the type of wall material on the stability of encapsulated anthocyanin is very important. In this study, maltodextrin (MD) and its combination with whey protein isolate (WPI) or gum arabic (GA) were utilised as wall materials to obtain encapsulated purple corn anthocyanins (PCAs) (MD-PCA, MD-WPI-PCA, MD-GA-PCA) using spray drying. The effect of the amount of the wall material was determined by encapsulation efficiency, anthocyanin content, and colour. On this basis, the effects of the types of wall materials on the physicochemical characteristics, storage, and digestion stabilities of encapsulated PCA, as well as their stabilities in chewing tablets, were investigated. The highest encapsulation efficiency, suitable colour, and anthocyanin content were obtained with the mass ratios 1:1 PCA to MD, 2:3 PCA to MD-GA, and 1:1 PCA to MD-WPI. Microencapsulation increased PCA storage and digestion stabilities. All three types of PCA microcapsules had low water content and hygroscopicity and good water solubility. MD-PCA had the strongest stability when stored at 25 °C; MD-GA-PCA-when stored at 40 °C, or in the presence of 5000 Lux light illumination; MD-WPI-PCA-when stored in 75% relative humidity or during gastric-intestinal digestion, but its resistance to 40 °C temperature and light illumination was lower than those for the two others. When used in chewing tablets, MD encapsulation was most stable in the presence of Ca²⁺, V_C, or Fe²⁺ and improved PCA digestion stability. In conclusion, MD is a good choice for PCA encapsulation in regular conditions. MD-GA and MD-WPI can be used when considering high storage temperature (or light illumination) and high humidity (or for high digestion stability), respectively. The results of this study provide a reference for the storage and application of PCA.

Investigation of the difference in color enhancement effect on cyanidin-3-O-glucoside by phenolic acids and the interaction mechanism

Co-pigmentation effect of phenolic acids on cyanidin-3-O-glucoside (C3G) and the mechanisms were investigated. Sinapic acid (SIA), ferulic acid (FA), p-coumaric acid (p-CA) and syringic acid (SYA) significantly enhanced C3G stability (P < 0.05), whereas vanillic acid (VA) and gallic acid (GA) showed no influence (P > 0.05). Among these phenolic acids, SIA and FA had higher binding coefficient with C3G (48.83 and 43.38), reduced degradation rate constant by 40.0 ∼ 50.0 %, prolonged half-life by 74.6 ∼ 94.7 % at 323 K, and significantly inhibited C3G hydration reaction (pK_h = 2.87 and 2.80, P < 0.05). Molecular docking revealed that C3G and co-pigments were connected by hydrogen bond and π-π stacking interaction. Hydroxycinnamic acids of SIA, FA and p-CA bound with ring B and ring C of C3G, while hydroxybenzoic acids of SYA, VA and GA hardly interacted with ring C. Generally, the protection effect of hydroxycinnamic acids on C3G was better than that of hydroxybenzoic acids, exhibiting stronger hyperchromic effect.

A visual bi-layer indicator based on mulberry anthocyanins with high stability for monitoring Chinese mitten crab freshness

In this study, a bilayer film (BIF) was fabricated to improve the stability of an anthocyanin-based freshness indicator film. The sensor layer consists of gellan gum (GG) and mulberry anthocyanin (MAE) for freshness indication. The oxygen barrier layer was constructed from chitosan (CS), polyvinyl alcohol (PVA), sodium alginate (SA), and pullulan (Pu) to the protection of MAE from oxidation. The highest antioxidant activity of BIF was 91.28 %. BIF was used to monitor the Chinese mitten crab freshness. The total volatile basic nitrogen (TVB-N) level was increased to 31.23 mg/100 g on day 8, and the color of the indicator presented a visible change from pink to dark green. The acquired results revealed a good correlation between TVB-N, pH, and color change of the indicator. The research indicated that the BIF was applied for freshness monitoring of Chinese mitten crab and displayed significant color changes that would be effective in commercial environments.

Biological Activities and Solubilization Methodologies of Naringin

Naringin (NG), a natural flavanone glycoside, possesses a multitude of pharmacological properties, encompassing anti-inflammatory, sedative, antioxidant, anticancer, anti-osteoporosis, and lipid-lowering functions, and serves as a facilitator for the absorption of other drugs. Despite these powerful qualities, NG's limited solubility and bioavailability primarily undermine its therapeutic potential. Consequently, innovative solubilization methodologies have received considerable attention, propelling a surge of scholarly investigation in this arena. Among the most promising solutions is the enhancement of NG's solubility and physiological activity without compromising its inherent active structure, therefore enabling the formulation of non-toxic and benign human body preparations. This article delivers a comprehensive overview of NG and its physiological activities, particularly emphasizing the impacts of structural modification, solid dispersions (SDs), inclusion compound, polymeric micelle, liposomes, and nanoparticles on NG solubilization. By synthesizing current research, this research elucidates the bioavailability of NG, broadens its clinical applicability, and paves the way for further exploration and expansion of its application spectrum.

Effects of whey protein isolate and ferulic acid/phloridzin/naringin/cysteine on the thermal stability of mulberry anthocyanin extract at neutral pH

In this study, the effects of whey protein isolate (WPI) and four copigments, including ferulic acid (FA), phloridzin, naringin, and cysteine (Cys), on the thermal stability (80 °C/2h) of mulberry anthocyanin extract (MAE) pigment solution at pH 6.3 were studied. WPI addition or copigment (except for Cys) addition alone could protect anthocyanin from degradation to a certain degree, and FA exhibited the best effect among copigments. Compared with the MAE-WPI and MAE-FA binary systems, ΔE of the MAE-WPI-FA ternary system decreased by 20.9% and 21.1%, respectively, and the total anthocyanin degradation rate decreased by 38.0% and 39.3%, respectively, indicating the best stabilizing effect. Remarkably, interactions between anthocyanins and Cys, which generate four anthocyanin derivatives with 513-nm UV absorption during heat treatment, did not alter the color stability of MAE solution; however, they accelerated anthocyanin degradation. These results favor the combined use of multiple methods to stabilize anthocyanins at neutral conditions.

Black rice and its by-products: anthocyanin-rich extracts and their biological potential

Recently, growing demand for products enriched with natural compounds that support human health has been observed. Black rice, its by-products, and residues are known to have in their composition a large amount of these compounds with biological potential, mainly anthocyanins. These compounds have reported effects on anti-obesity, antidiabetic, antimicrobial, anticancer, neuroprotective, and cardiovascular disease. Therefore, the extract from black rice or its by-products have great potential for application as ingredients in functional foods, supplements, or pharmacological formulations. This overview summarizes the methods employed for the extraction of anthocyanins from both black rice and its by-products. In addition, trends in applications of these extracts are also evaluated regarding their biological potential. Commonly, the extraction methods used to recover anthocyanins are conventional (maceration) and some emerging technologies (Ultrasound-Assisted Extraction - UAE, and Microwave-Assisted Extraction - MAE). Anthocyanin-rich extracts from black rice have presented a biological potential for human health. In vitro and in vivo assays (in mice) showed these compounds mainly with anti-cancer properties. However, more clinical trials are still needed to prove these potential biological effects. Extracts from black rice and its by-products have great potential in applying functional products with beneficial characteristics to humans and reducing agro-industrial residues.

Formation of hydroxyphenyl-pyranoanthocyanins derived from cyanidin-3-O-glucoside and effects of high-pressure processing on the transformation efficiency

Hydroxyphenyl-pyranoanthocyanins (PACNs), derived from anthocyanins (ACNs) reacted with hydroxycinnamic acids, have higher practical application value because of better physicochemical stability than their precursors. However, the slow formation rate restricted their broader applications. In the present study, cyanidin-3-O-glucoside (C3G) was chosen to react with four kinds of hydroxycinnamic acids in a model solution. Changes of color and the production of hydroxyphenyl-PACNs were monitored. The formation of derivatives was time-dependent, and the orange-yellow changing trend was correlated with the formation of PACNs and the consumption of C3G. In addition, high-pressure processing (HPP) as a widely-used non-thermal processing method in the food industry was conducted to investigate its impact on hydroxyphenyl-PACNs formation. The results showed that HPP significantly improves the yield of two types of hydroxyphenyl-PACNs (C3G-4-vinylcatechol and C3G-4-vinylphenol) and the retention of total residual pigments during 56 days of storage. Therefore, HPP contributed to color-protecting and the transformation of hydroxyphenyl-PACNs.

Liposome Formulations for the Strategic Delivery of PARP1 Inhibitors: Development and Optimization

The development of a lipid nano-delivery system was attempted for three specific poly (ADP-ribose) polymerase 1 (PARP1) inhibitors: Veliparib, Rucaparib, and Niraparib. Simple lipid and dual lipid formulations with 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1'-glycerol) sodium salt (DPPG) and 1,2-dipalmitoyl-sn-glycero-3-phosphocoline (DPPC) were developed and tested following the thin-film method. DPPG-encapsulating inhibitors presented the best fit in terms of encapsulation efficiency (>40%, translates into concentrations as high as 100 µM), zeta potential values (below -30 mV), and population distribution (single population profile). The particle size of the main population of interest was ~130 nm in diameter. Kinetic release studies showed that DPPG-encapsulating PARP1 inhibitors present slower drug release rates than liposome control samples, and complex drug release mechanisms were identified. DPPG + Veliparib/Niraparib presented a combination of diffusion-controlled and non-Fickian diffusion, while anomalous and super case II transport was verified for DPPG + Rucaparib. Spectroscopic analysis revealed that PARP1 inhibitors interact with the DPPG lipid membrane, promoting membrane water displacement from hydration centers. A preferential membrane interaction with lipid carbonyl groups was observed through hydrogen bonding, where the inhibitors' protonated amine groups may be the major players in the PARP1 inhibitor encapsulation mode.

The chromogenic mechanism of natural pigments and the methods and techniques to improve their stability: A systematic review

Pigments have become a very important part of food research, not only adding sensory properties to food, but also providing functional properties to the food system. In this paper, we review the source, structure, modification, encapsulation and current status of the three main types of natural pigments that have been studied in recent years: polyphenolic flavonoids, tetraterpenoids and betaines. By examining the modification of pigment, the improvement of their stability and the impact of new food processing methods on the pigments, a deeper understanding of the properties and applications of the three pigments is gained, the paper reviews the research status of pigments in order to promote their further research and provide new innovations and ideas for future research in this field.

The stability of phenolic compounds and the colour of lingonberry juice with the addition of different sweeteners during thermal treatment and storage

Lingonberries (Vaccinium vitis-idaea L.) are rich in phenolic compounds associated with several health benefits. The berries are also astringent, sour, and bitter and the addition of a sweetener is necessary to increase the palatability of lingonberry products. The addition of a sweetener may, however, affect the stability of phenolic compounds in the product. The aim of this study was thus to determine the effects of the addition of sweeteners (sucrose, acesulfame K or sucralose) and temperature on the stability of anthocyanins, flavonols, flavan-3-ols, hydroxycinnamic acids and the colour of lingonberry juice during thermal treatment and storage. The addition of sweeteners did not affect the stability of phenolic compounds or the colour of lingonberry juice during thermal treatment or storage. The stability of the phenolic compounds was significantly affected by temperature. Anthocyanins were the least stable of the phenolic compounds. The half-lives of total anthocyanins were 3.8, 2.0 and 0.8 h at 75, 85 and 95 °C, respectively. The half-lives during storage were 12.8 and 2.7 weeks at 6 and 22 °C, respectively. Cyanidin-3-galactoside, the major anthocyanin in lingonberries, was extensively degraded during storage, probably due to galactoside side-activities of the enzyme preparation used in juice production. After thermal treatment, the juices were darker and bluer, with lower chromaticity, while after storage, the juices were lighter, more yellow, and had higher chromaticity.

Pharmacological Activities and Chemical Stability of Natural and Enzymatically Acylated Anthocyanins: A Comparative Review

Anthocyanins (ANCs) are naturally occurring water-soluble pigments responsible for conferring red, blue, and purple colors to fruits, vegetables, flowers, and grains. Due to their chemical structure, they are highly susceptible to degradation by external factors, such as pH, light, temperature, and oxygen. Naturally acylated anthocyanins have proven to be more stable in response to external factors and exhibit superior biological effects as compared with their non-acylated analogues. Therefore, synthetic acylation represents a viable alternative to make the application of these compounds more suitable for use. Enzyme-mediated synthetic acylation produces derivatives that are highly similar to those obtained through the natural acylation process, with the main difference between these two pathways being the catalytic site of the enzymes involved in the synthesis; acyltransferases catalyze natural acylation, while lipases catalyze synthetic acylation. In both cases, their active sites perform the addition of carbon chains to the hydroxyl groups of anthocyanin glycosyl moieties. Currently, there is no comparative information regarding natural and enzymatically acylated anthocyanins. In this sense, the aim of this review is to compare natural and enzyme-mediated synthetic acylated anthocyanins in terms of chemical stability and pharmacological activity with a focus on inflammation and diabetes.

Anthocyanins: Modified New Technologies and Challenges

Anthocyanins are bioactive compounds belonging to the flavonoid class which are commonly applied in foods due to their attractive color and health-promoting benefits. However, the instability of anthocyanins leads to their easy degradation, reduction in bioactivity, and color fading in food processing, which limits their application and causes economic losses. Therefore, the objective of this review is to provide a systematic evaluation of the published research on modified methods of anthocyanin use. Modification technology of anthocyanins mainly includes chemical modification (chemical acylation, enzymatic acylation, and formation of pyran anthocyanidin), co-pigmentation, and physical modification (microencapsulation and preparation of pickering emulsion). Modification technology of anthocyanins can not only increase bioavailability and stability of anthocyanin but also can improve effects of anthocyanin on disease prevention and treatment. We also propose potential challenges and perspectives for diversification of anthocyanin-rich products for food application. Overall, integrated strategies are warranted for improving anthocyanin stabilization and promoting their further application in the food industry, medicine, and other fields.

Mechanism of sugar degradation product 5-hydroxymethylfurfural reducing the stability of anthocyanins

The coexistence of anthocyanin with the sugar degradation product 5-hydroxymethylfurfural (5-HMF) is inevitable during the processing and storage of anthocyanin-rich juices. It was determined from our study that lower concentrations of 5-HMF have little effect on the stability of Cyanidin-3-O-glucoside (C3G), and even cause a slight increase for a short period of time. As the concentration of 5-HMF increased, the retention of C3G decreased and the color of the solution changed from orange-red to purple-red. The reaction sites of 5-HMF and C3G in its hemiketal form were predicted by quantum chemical calculations in order to investigate the pathways of action of the two. The degradation mechanism of 5-HMF on anthocyanin was verified by Ultraviolet and Visible spectrophotometer and Ultra performance liquid chromatography-mass spectrometry. Therefore, this article provides further theoretical support for the study of the effect of furfural compounds, which are sugar degradation products, on the stability of anthocyanins.

Cyanidin-3-O-glucoside and protocatechuic acid alleviate heat stress-induced testicular damage

Testicular hyperthermia induced by unhealthy living habits and pathological or occupational factors can cause spermatogenic dysfunction with an outcome of sub-fertility or even infertility. Cyanidin-3-O-glucoside (C3G) is the most typical anthocyanin in foods that has been recognized as an antioxidant with promising protection for male reproduction. However, its specific effect against testicular hyperthermia and the mechanisms involving its primary gastrointestinal metabolite protocatechuic acid (PCA) are still unexplored. In the present study, testicular hyperthermia in mice was established by employing a single hot water bath at 43 °C for 30 min. C3G and PCA were intragastrically given to investigate their prevention ability against heat stress-induced testicular damage. It was found that C3G and PCA restored the external diameter and thickness, and alleviated atrophy and vacuolation of seminiferous tubules. Simultaneously, C3G and PCA enhanced testicular heat stress tolerance through reducing superfluous eIF2α phosphorylation and stress granule formation. C3G and PCA effectively improved the testicular antioxidant system and regulated the IRE1α-XBP1 pathway, contributing to mitigatory spermatogenesis dysfunction and testicular damage. This finding revealed that anthocyanins were the novel compounds for alleviating testicular damage, and provided a reliable theoretical basis for improving male fertility disturbed by heat stress.

Stabilization of Anthocyanins from Coffee (Coffea arabica L.) Husks and In Vivo Evaluation of Their Antioxidant Activity

Coffee (Coffea arabica L.) is one of the most popular and widely consumed products throughout the world, mainly due to its taste, aroma, caffeine content, and natural antioxidants. Among those antioxidants, anthocyanins are one of the most important natural pigments, which can be found in coffee husks. It is widely known that anthocyanins have multiple health benefits partially linked to their antioxidant properties. However, anthocyanins have low stability and are sensitive to all types of changes. In order to prevent its degradation, anthocyanins can be stabilized with nanoparticles. Thus, the main objective of this study was to evaluate the stability of the anthocyanins extracted from coffee husks, using three different extracting agents (ethanol, methanol, and water) and stabilizing them through conjugation with zinc oxide nanoparticles. The anthocyanins extracts were mainly composed of cyanidin-3-rutinoside (97%) and the total phenolic compounds of the fresh extracts were 458.97 ± 11.32 (methanol), 373.53 ± 12.74 (ethanol), and 369.85 ± 15.93 (water) mg GAE/g. On the other hand, the total phenolic compounds of the nanoparticle-anthocyanin conjugates underwent no significant changes after stabilization as the major loss was less than 3%. Furthermore, the percentage of anthocyanins' degradation was less than 5% after 12 weeks of storage. On top of that, fresh anthocyanin extracts and anthocyanin-nanoparticle conjugates exhibited a strong protective effect against oxidative stress and increased the survival rate of Caenorhabditis elegans.

Bioactive Natural Pigments' Extraction, Isolation, and Stability in Food Applications

Color in food has multiple effects on consumers, since this parameter is related to the quality of a product, its freshness, and even its nutrient content. Each food has a characteristic color; however, this can be affected by the technological treatments that are applied during its manufacturing process, as well as its storage. Therefore, the development of new food products should take into account consumer preferences, the physical properties of a product, food safety standards, the economy, and applications of technology. With all of this, the use of food additives, such as dyes, is increasingly important due to the interest in the natural coloring of foods, strict regulatory pressure, problems with the toxicity of synthetic food colors, and the need for globally approved colors, in addition to current food market trends that focus on the consumption of healthy, organic, and natural products. It is for this reason that there is a growing demand for natural pigments that drives the food industry to seek or improve extraction techniques, as well as to study different stability processes, considering their interactions with the food matrix, in order to meet the needs and expectations of consumers.

The Interactional Characterization of Lentil Protein Isolate (LPI) with Cyanidin-3-O-Glucoside (C3G) and Their Effect on the Stability and Antioxidant Activity of C3G

The interaction between lentil protein isolate (LPI) and cyanidin-3-O-glucoside (C3G) was investigated via with UV−vis spectroscopy, circular dichroism, and fluorescence spectroscopy and the stability of anthocyanin was also evaluated. After LPI mixed with C3G, the turbidity and foaming capacity increased and the particle size and surface charge did not change significantly, while the surface hydrophobicity decreased significantly (p < 0.05). The fluorescence results indicated that C3G quenched the intrinsic of LPI by static quenching and LPI bound with C3G via hydrophobic effects with Ka of 3.24 × 106 M−1 at 298 K. The addition of LPI significantly (p < 0.05) slightly decreased the thermal and oxidation degradation of C3G by up to 90.23% and 54.20%, respectively, while their antioxidant activity was inhibited upon mixing. These alterations of physicochemical properties might be attributed to their structural changes during the interaction. The obtained results would be of help in stabilizing bioactive compounds and the development of functional foods.

Sharif MS, Md Nor N. The Physicochemical Analysis and Anthocyanin Level of Malaysian Purple Sweet Potato Cracker

Purple Sweet Potato (PSP) in Malaysia is an abandoned crop. Even though it has various health benefits and nutritional values, consumers, especially Malaysians, still lack purple sweet potato consumption. It has a high dietary fibre content, a low glycemic index, and contains proteins, minerals, polyphenols, and anthocyanin. The National Health Morbidity Survey (Malaysia) in 2019 reported that 94% of Malaysian adults lack fiber consumption in their dietary patterns. As a result, it may become an alternative crop for individuals who consume less nutrients and fibre as a result of dietary choices and health issues. This one-of-a-kind crop also contains anti-oxidative, hepatoprotective, anti-inflammatory, anti-tumor, anti-diabetic, anti-microbial, anti-obesity, and anti-aging qualities. Due to the lack of a commercial food product based on this crop, it has become an unpopular crop among Malaysians. Purple sweet potato makes only a few Malaysian sweets and traditional snacks. Nonetheless, Malaysian customers continue to ignore it. Thus, Purple Sweet Potato Cracker was made, and a proximate analysis was conducted to examine its physicochemical content. It was found that the newly developed PSP crackers were high in fiber, vitamins, and minerals, as well as in calcium (1332.08 mg/kg) and contained anthocyanins of 6.68 mg/L. Besides that, this special cracker is free from food preservatives without coloring agents and additives. The processing of Purple Sweet Potato Cracker carries important features for small-medium entrepreneurs, which will contribute to the Malaysian economy perspectives, as it has a good potential to be marketed in domestic and international commercial food outlets.

Fabrication of silk sericin-anthocyanin nanocoating for chelating and saturation-visualization detection of metal ions

Silk sericin (SS) is a natural water-soluble protein with the potential to chelate metal ions via its polar groups. However, the difficulty of identifying the saturation of SS limits its application as filter films. One solution is to construct SS filter films with an indicator to reflect the degree of saturation of silk sericin. Hence, the nanocoating consisting of co-assembled SS protein and anthocyanin (C3G) nanoparticles is designed, constructed, and characterized to chelate metal ions with a saturation-visualization detection behavior. Here, metal ions Zn²⁺ and Al³⁺ are chosen as models to explore the chelating ability of SS and indicator behaviors of C3G, which could indicate the saturation degree of SS. Interestingly, after the saturation of SS in the solution and filter film situations, the visible color progressively shifts from pink to blue (Zn²⁺) or violet (Al³⁺), with the corresponding redshift of UV-Vis absorbance of C3G. Remarkable removal effectiveness of Zn²⁺ and Al³⁺, namely 93.16% and 53.97%, as well as an evident saturation-visualization detection, were identified by filter paper films with the nanocoating. Our research provides a fresh viewpoint for designing SS filter films that could effectively remove metal ions while enabling real-time viewing.

Enzymatic acylation of cyanidin-3-O-glucoside in raspberry anthocyanins for intelligent packaging: Improvement of stability, lipophilicity and functional properties

Anthocyanins (ACNs) as one category of water-soluble flavonoid pigments are increasingly employed in pH sensing indicator applications for monitoring food freshness. Nevertheless, considering that anthocyanins are sensitive to environmental factors, their practical applications in food industries are still rather limited. In order to improve the stability of anthocyanins and capitalize upon their application in pH-color responsive intelligent packaging, this study aims to graft octanoic aid onto raspberry anthocyanins catalyzed by immobilized Candida antarctica lipase B (Novozymes 435). Structural analyses based on Fourier transform infrared spectroscopy (FTIR), UV-Vis, liquid chromatography-mass spectrometry (LC-MS), and nuclear magnetic resonance (NMR) revealed that octanoic acid was regioselective grafted onto the 6-OH position of its glucoside. The acylation efficiency of C3G by octanoic acid up to 47.1%. The octanoic acid moiety was found to improve lipophilicity, antioxidant activity and stability of C3G. In addition, acylated derivative also maintained the pH-color response characteristics of nature ACNs and exhibited excellent NH3 response properties. These results indicated that acylated anthocyanins exhibit potential application as intelligent packaging indicator for monitoring food freshness.

The Role of Anthocyanin in Modulating Diabetic Cardiovascular Disease and Its Potential to Be Developed as a Nutraceutical

Cardiovascular disease (CVD) is directly linked to diabetes mellitus (DM), and its morbidity and mortality are rising at an alarming rate. Individuals with DM experience significantly worse clinical outcomes due to heart failure as a CVD consequence than non-diabetic patients. Hyperglycemia is the main culprit that triggers the activation of oxidative damage, inflammation, fibrosis, and apoptosis pathways that aggravate diabetic CVD progression. In recent years, the development of phytochemical-based nutraceutical products for diabetic treatment has risen due to their therapeutic properties. Anthocyanin, which can be found in various types of plants, has been proposed for preventing and treating various diseases, and has elicited excellent antioxidative, anti-inflammation, anti-fibrosis, and anti-apoptosis effects. In preclinical and clinical studies, plants rich in anthocyanin have been reported to attenuate diabetic CVD. Therefore, the development of anthocyanin as a nutraceutical in managing diabetic CVD is in demand. In this review, we unveil the role of anthocyanin in modulating diabetic CVD, and its potential to be developed as a nutraceutical for a therapeutic strategy in managing CVD associated with DM.

Characterization of Anthocyanins and Their Antioxidant Activities in Indian Rose Varieties (Rosa × hybrida) Using HPLC

The present study was designed to explore the anthocyanin profile and antioxidant activities in Indian rose varieties (Rosa × hybrida). Among fifty varieties, Ashwini recorded the highest total phenolic content (427.59 ± 3.47 mg GAE/100 g) along with the highest FRAP (397.15 ± 0.82 µmol trolox/g) and DPPH free radical scavenging activity (93.47 ± 0.19%) on a fresh weight basis. A significant positive correlation was observed between total anthocyanin content, total phenolic content, and antioxidant activities. Four distinct clusters were formed according to total anthocyanins, total phenols, and antioxidant activities; white- and yellow-colored varieties were most distant from red ones. Principal component analysis revealed that variable total anthocyanin content contributed to the maximum variation among the fifty rose varieties studied. Highly anthocyanin-rich rose varieties were characterized by high-performance liquid chromatography coupled with a photodiode array detector (HPLC-PAD), which identified two major components of anthocyanins, i.e., cyanidin 3,5-di-O-glucoside and pelargonidin 3,5-di-O-glucoside. Cyanidin 3,5-di-O-glucoside was the predominant anthocyanin in red- and pink-colored varieties, whereas pelargonidin 3,5-di-O-glucoside was the major one in the orange variety. The maximum cyanidin 3,5-di-O-glucoside content was recorded in variety Ashwini (497.79 mg/100 g), whereas the maximum pelargonidin 3,5-di-O-glucoside content was recorded in Suryakiran (185.43 mg/100 g). It is suggested that the rose varieties with high anthocyanin content and antioxidant activity can be exploited as a potential source of nutraceuticals in the food industry.

Antioxidants from Hyeronima macrocarpa Berries Loaded on Nanocellulose: Thermal and Antioxidant Stability

This study investigated the effect of different storage temperatures (35-55 °C) on the bioactive substances and antioxidant properties of Hyeronima macrocarpa berries loaded on nanocellulose. NC was extracted from banana pseudo-stems and presented an interesting surface and porosity properties. The acidified ethanol extract showed better anthocyanin extraction (1317 mg C3G eq./100 g FW) and was used for the preparation of the powdered product, which presented an intense and uniform magenta color, with CIELAB parameters of L* = 59.16, a* = 35.61, and b* = 7.08. The powder exhibited significant stability at storage temperatures of 35 and 45 °C, in which there was no significant loss of anthocyanins or a decrease in antioxidant capacity. In addition, the color was stable for up to 4 months without adding any preservative agent. The anthocyanin-rich extract of H. macrocarpa reached an estimated shelf-life of 315 days (stored at 35 °C), as a result of the impregnation process between the extract and NC, with the ability to protect the bioactives from degradation, due to NC surface properties.

Lesser-Consumed Tropical Fruits and Their by-Products: Phytochemical Content and Their Antioxidant and Anti-Inflammatory Potential

Açaí, lychee, mamey, passion fruit and jackfruit are some lesser-consumed tropical fruits due to their low commercial production. In 2018, approximately 6.8 million tons of these fruits were harvested, representing about 6.35% of the total world production of tropical fruits. The present work reviews the nutritional content, profile of bioactive compounds, antioxidant and anti-inflammatory capacity of these fruits and their by-products, and their ability to modulate oxidative stress due to the content of phenolic compounds, carotenoids and dietary fiber. Açaí pulp is an excellent source of anthocyanins (587 mg cyanidin-3-glucoside equivalents/100 g dry weight, dw), mamey pulp is rich in carotenoids (36.12 mg β-carotene/100 g fresh weight, fw), passion fruit peel is rich in dietary fiber (61.16 g/100 dw). At the same time, jackfruit contains unique compounds such as moracin C, artocarpesin, norartocarpetin and oxyresveratrol. These molecules play an important role in the regulation of inflammation via activation of mitogen-activated protein kinases (including p38, ERK and JNK) and nuclear factor κB pathways. The properties of the bioactive compounds found in these fruits make them a good source for use as food ingredients for nutritional purposes or alternative therapies. Research is needed to confirm their health benefits that can increase their marketability, which can benefit the primary producers, processing industries (particularly smaller ones) and the final consumer, while an integral use of their by-products will allow their incorporation into the circular bioeconomy.

Bio-Based pH Indicator Films for Intelligent Food Packaging Applications

The widespread concerns about the environmental problems caused by conventional plastic food packaging and food waste led to a growing effort to develop active and intelligent systems produced from renewable biodegradable polymers for food packaging applications. Among intelligent systems, the most widely used are pH indicators, which are generally based on a pH-sensitive dye incorporated into a solid support. The objective of this study was to develop new intelligent systems based on renewable biodegradable polymers and a new bio-inspired pH-sensitive dye. The structure of the dye was elucidated through FT-IR and 1D and 2D NMR spectroscopic analyses. UV-VIS measurements of the dye solutions at various pH values proved their halochromic properties. Their toxicity was evaluated through theoretical calculations, and no toxicity risks were found. The new anthocyanidin was used for the development of biodegradable intelligent systems based on chitosan blends. The obtained polymeric films were characterized through UV-VIS and FT-IR spectroscopy. Their thermal properties were assessed through a thermogravimetric analysis, which showed a better stability of chitosan–PVA–dye and chitosan–starch–dye films compared to those of chitosan–cellulose–dye films and the dye itself. The films’ sensitivity to pH variations was evaluated through immersion in buffer solutions with pH values ranging from 2 to 12, and visible color changes were observed.

Color Stability Enhancement and Antioxidation Improvement of Sanhua Plum Wine under Circulating Ultrasound

Anthocyanins contribute to the attractive color of fruit wine, and their excessive degradation is deleterious to quality, especially for wine with an inherently low anthocyanin content, such as Sanhua plum wine. Ultrasonic treatment is well recognized for wine color maintenance. In the present study, fresh Sanhua plum wine was ultrasonic-treated and aged in barrels for three months. Our results demonstrate that ultrasonic treatment at 28 and 40 kHz improves color performance, as expressed by an increase in a*, b*, and C* values and color intensity, which is highly related to copigmentation. This successful conservation was attributed to the inactivation of polyphenol oxidase and the corresponding reduction in anthocyanin degradation. Finally, the increased antioxidative ability was verified due to the hydrogen donating ability of the surviving anthocyanins. This study indicates the reliability of ultrasonic treatment for providing superior colorfastness during Sanhua plum wine aging, which is also of great potential in processing different fruit wines.

Green Derived Zinc Oxide (ZnO) for the Degradation of Dyes from Wastewater and Their Antimicrobial Activity: A Review

The quest for eco-friendly synthetic routes that can be used for the development of multifunctional materials, in particular for water treatment, has reinforced the use of plant extracts as replacement solvents in their use as reducing and capping agents during the synthesis of green derived materials. Amongst the various nanoparticles, Zinc Oxide (ZnO) has emerged as one of the preferred candidates for photocatalysis due to its optical properties. Moreover, ZnO has also been reported to possess antimicrobial properties against various bacterial strains such as E. coli and S. aureus. In this review, various types of pollutants including organic dyes and natural pollutants are discussed. The treatment methods that are used to purify wastewater with their limitations are highlighted. The distinguishing properties of ZnO are clearly outlined and defined, not to mention the performance of ZnO as a green derived photocatalyst and an antimicrobial agent, as well. Lastly, an overview is given of the challenges and possible further perspectives.