pH-responsive chitosan-based film incorporated with alizarin for intelligent packaging applications

Development and evaluation of Bauhinia Kockiana extract-incorporated sago starch intelligent film strips for real-time freshness monitoring of coconut milk

The aim of this work was to fabricate an intelligent film using sago starch incorporated with the natural source of anthocyanins from the Bauhinia Kockiana flower and use it to monitor the freshness of coconut milk. The films were developed using the casting method that included the addition of the different concentrations (0, 5, 10, 15 mg) of Bauhinia Kockiana extract (BKE) obtained using a solvent. The anthocyanin content of Bauhinia Kockiana was 262.17 ± 9.28 mg/100 g of fresh flowers. The spectral characteristics of BKE solutions, cross-section morphology, physiochemical, barrier, and mechanical properties, and the colour variations of films in different pH buffers were investigated. Films having the highest BKE concentration demonstrated the roughest structure and highest thickness (0.16 mm), moisture content (9.72 %), swelling index (435.83 %), water solubility (31.20 %), and elongation at break (262.32 %) compared to the other films. While monitoring the freshness of coconut milk for 16 h, BKE15 showed remarkable visible colour changes (from beige to dark brown), and the pH of coconut milk dropped from 6.21 to 4.56. Therefore, sago starch film incorporated with BKE has excellent potential to act as an intelligent pH film in monitoring the freshness of coconut milk.

Multifunctional Sensors Made with Conductive Microframework and Biomass Hydrogel for Detecting Packaging Pressure and Food Freshness

Food packaging detection devices have attracted attention to optimize storage situations and reduce food spoilage. However, low-cost and highly sensitive multifunctional sensors for detecting both food freshness and packaging pressure are still lacking. In this study, a multifunctional sensor was developed consisting of a MXene coated alcohol-soluble polyurethane fiber network (MXene/APU) and composite biohydrogel films made of konjac glucomannan, chitosan, and blueberry anthocyanin (KCB). Based on the pressure sensitivity of MXene/APU and the color changes of KCB in response to pH values, the sensor can detect internal package bulging, external squeezing, and food deterioration. The pressure sensor shows a sensitivity of 1.16 kPa-1, a response time of 200 ms, a wide strain range of 1092%, and stability over multiple loops. The pressure sensor could detect human motion and identify surface morphologies. The excellent sensor performance was attributed to the porous structure and large specific surface area of microfiber networks, conductivity of MXene nanosheets, and protective effect of KCB films coated on the conductive membrane. Besides, the microfluidic blow-spinning method used to prepare microfiber networks showed the advantages of low energy consumption and high production efficiency. Based on the color changes of blueberry anthocyanin loaded in KCB films in response to pH, the sensor realized sensitive spoilage detection of food containing protein. This study provides a new multifunctional food packaging sensing device and a greater understanding of the optimization and application of related devices.

A Colorimetric Nanofiber Film Based on Ethyl Cellulose/Gelatin/Purple Sweet Potato Anthocyanins for Monitoring Pork Freshness

In this study, colorimetric indicator nanofiber films based on ethyl cellulose (EC)/gelatin (G) incorporating purple sweet potato anthocyanins (PSPAs) were designed via electrospinning technology for monitoring and maintaining the freshness of pork. The film presented good structural integrity and stability in a humid environment with water vapor permeability (WVP) of 6.07 ± 0.14 × 10-11 g·m-1s-1Pa-1 and water contact angle (WCA) of 81.62 ± 1.43°. When PSPAs were added into the nanofiber films, the antioxidant capacity was significantly improved (p < 0.05) with a DPPH radical scavenging rate of 68.61 ± 1.80%. The nanofiber films showed distinguishable color changes as pH changes and was highly sensitive to volatile ammonia than that of casting films. In the application test, the film color changed from light pink (fresh stage) to light brown (secondary freshness stage) and then to brownish green (spoilage stage), indicating that the nanofiber films can be used to detect the real-time freshness of pork during storage. Meanwhile, it could prolong the shelf life of pork by inhibiting the oxidation degree. Hence, these results suggested that the EC/G/PSPA film has promising future for monitoring freshness and extending shelf life of pork.

Development and characterization of smart double-layer nanofiber mats based on potato starch-turnip peel anthocyanins and guar gum-cinnamaldehyde

This experiment was conducted with the objectives of developing bilayer nanofiber mats based on potato starch-turnip peel extract (PS-TPE) and guar gum-cinnamaldehyde (GG-CA) for freshness monitoring and enhancing the quality of lamb meat during cooled storage conditions. Encapsulating CA/TPE into the nanofibers resulted in reduced tensile strength, water vapor permeability, moisture content, and water solubility. Colorimetric nanofibers, including PS-GG-TPE 6%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1%, presented red color at pH 1-4, purplish red at pH 5-7, green at pH 8-10, and brown at pH 11-12. The color of PS-GG-TPE 6% nanofiber mats changed from white to purplish red, signaling that the lamb meats had turned from fresh to spoiled. PS-GG-CA 1%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1% nanofibers have the potential to be utilized to control the growth of spoilage-related microorganisms for extending the shelf-life of fresh lamb meat under cooled storage conditions up to 13 days.

Functionalization of bamboo fibers with lawsone dye (Lawsonia inermis) to produce bioinspired hybrid color composite with antibacterial activity

There is great interest in using eco-friendly functional colorants with antibacterial activity to produce colorful textile and plastic products. In this study, we designed, produced, and analyzed a novel multifunctional hybrid color composite colorant with antimicrobial properties, prepared from plant-based products. The new functional color composite was prepared by stabilizing lawsone dye onto amino-silanized cellulose from bamboo fibers. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy were performed to examine the possible interactions between the lawsone dye and silanized bamboo fibers. The color performance, morphology, chemical stability, and thermal stability of the prepared color composite were evaluated using scanning electron microscopy (SEM), UV-Vis spectrophotometry, and thermogravimetric analysis (TGA). The results were compared to those for pure lawsone dye. Modification of amino-silanized bamboo fibers with lawsone dye led to the formation of a light brown colorant that is more resistant to organic solvents (e.g. acetone, ethanol) and elevated temperatures than raw natural dye. Importantly, the designed bamboo fiber/lawsone system (BF-APTES-L) benefits from the synergistic combination of lawsone and bamboo fibers, showing strong antibacterial activity compared to the control sample of bamboo-as evidenced by noticeably inhibited growth of E. coli, S. aureus, and B. subtilis.

Halochromic smart packaging film based on montmorillonite/polyvinyl alcohol-high amylose starch nanocomposite for monitoring chicken meat freshness

Polyvinyl alcohol (PVA) was blended with high amylose starch (HAS) at a ratio of 3:1, and reinforced with montmorillonite (MMT K10) at different concentrations (1, 2, 5, and 7 % w/w of polymers) and anthocyanins (ANT) to develop an active and smart packaging film. MMT addition enhanced the film's mechanical, barrier, thermal, and water resistance properties. Incorporating ANT extracted from roselle calyx into the optimal nanocomposite film (MMT/PVA-HAS II) increased the films' antioxidant, pH-response, and antibacterial properties. FTIR, XRD, and SEM confirmed the intermolecular interactions and even distribution of ANT and MMT in the film matrix. Release rate of ANT was dependent on type of simulant, with higher rate in aqueous solutions compared to alcoholic/fatty food simulants, and cytotoxicity evaluation proved safety of films for food packaging applications. Storage experiments confirmed the potential applicability of the novel halochromic smart film as a promising candidate for monitoring chicken spoilage under abusive storage conditions.

Preparation of multifunctional hydrogels based on co-pigment-polysaccharide complexes and establishment of a machine learning monitoring platform

Economic loss due to fish spoilage exceeds 25 billion euros every year. Accurate and real-time monitoring of the freshness of fish can effectively cut down economic loss and food wastage. In this study, a dual-functional hydrogel based on sodium alginate-co-pigment complex with volatile antibacterial and intelligent indication was prepared and characterized. The characterization results indicated that the sodium alginate-co-pigment complex successfully improved the stability and color development ability of blueberry anthocyanins and bilberry anthocyanins at different temperatures and pH. The double cross-linking network inside the hydrogel conferred it with excellent mechanical properties. During rainbow trout storage, the hydrogel indicated a color difference of 73.55 on the last day and successfully extended the shelf-life of rainbow trout by 2 days (4 °C). Additionally, four dual-channel monitoring models were constructed using machine learning. The validation error of the genetic algorithm back propagation model (GA-BP) was only 5.6e-3, indicating that GA-BP can accurately monitor the freshness of rainbow trout. The rainbow trout real-time monitoring platform built based on GA-BP model can monitor the freshness of rainbow trout in real time through the images uploaded by users. The results of this study have broad applicability in the food industry, environmental conservation, and economic sustainability.

Carrageenan-based multifunctional packaging films containing Zn-carbon dots/anthocyanin derived from Kohlrabi peel for monitoring quality and extending the shelf life of shrimps

Carrageenan-based active/intelligent packaging films containing anthocyanin and ZnO-doped CD (Zn-CD) from purple Kohlrabi peels were prepared for freshness monitoring and shelf-life extension of shrimp, and the influence of additives on the films' physical, functional, and structural properties was investigated. The films showed excellent UV blocking ability (85.2% of UV-A and 99.4% of UV-B) and high antioxidant effect (∼99% for ABTS and ∼ 58.6% for DPPH radical scavenging activity) and showed strong antibacterial activity to stop the growth (100%) of L. monocytogenes and to reduce the growth of E. coli by 8.1 log CFU/mL after 12 h of incubation. In shrimp packaging experiments, the films were evident in the freshness monitoring, reduced spoilage, and increased shelf life. This study suggests that next-generation biopolymer films impregnated with biomass-derived CDs and natural colorants will provide broad directions for ensuring safety and extending shelf life to meet the accelerating demand for packaging products.

Material Breakthroughs in Smart Food Monitoring: Intelligent Packaging and On-Site Testing Technologies for Spoilage and Contamination Detection

Despite extensive commercial and regulatory interventions, food spoilage and contamination continue to impose massive ramifications on human health and the global economy. Recognizing that such issues will be significantly eliminated by the accurate and timely monitoring of food quality markers, smart food sensors have garnered significant interest as platforms for both real-time, in-package food monitoring and on-site commercial testing. In both cases, the sensitivity, stability, and efficiency of the developed sensors are largely informed by underlying material design, driving focus toward the creation of advanced materials optimized for such applications. Herein, a comprehensive review of emerging intelligent materials and sensors developed in this space is provided, through the lens of three key food quality markers - biogenic amines, pH, and pathogenic microbes. Each sensing platform is presented with targeted consideration toward the contributions of the underlying metallic or polymeric substrate to the sensing mechanism and detection performance. Further, the real-world applicability of presented works is considered with respect to their capabilities, regulatory adherence, and commercial potential. Finally, a situational assessment of the current state of intelligent food monitoring technologies is provided, discussing material-centric strategies to address their existing limitations, regulatory concerns, and commercial considerations.

On-site colorimetric food spoilage monitoring with smartphone embedded machine learning

Real-time and on-site food spoilage monitoring is still a challenging issue to prevent food poisoning. At the onset of food spoilage, microbial and enzymatic activities lead to the formation of volatile amines. Monitoring of these amines with conventional methods requires sophisticated, costly, labor-intensive, and time consuming analysis. Here, anthocyanins rich red cabbage extract (ARCE) based colorimetric sensing system was developed with the incorporation of embedded machine learning in a smartphone application for real-time food spoilage monitoring. FG-UV-CD100 films were first fabricated by crosslinking ARCE-doped fish gelatin (FG) with carbon dots (CDs) under UV light. The color change of FG-UV-CD100 films with varying ammonia vapor concentrations was captured in different light sources with smartphones of various brands, and a comprehensive dataset was created to train machine learning (ML) classifiers to be robust and adaptable to ambient conditions, resulting in 98.8% classification accuracy. Meanwhile, the ML classifier was embedded into our Android application, SmartFood++, enabling analysis in about 0.1 s without internet access, unlike its counterpart using cloud operation via internet. The proposed system was also tested on a real fish sample with 99.6% accuracy, demonstrating that it has a great advantage as a potent tool for on-site real-time monitoring of food spoilage by non-specialized personnel.

Preparation of Janus film for fog water collection via layer-by-layer assembling of nanocellulose and nanochitin on PLA

In order to explore the possibility of natural carbohydrate polymers as a biodegradable and sustainable fog water harvesting material, this work proposed an efficient substrate (hydrophobic)-transition layer (amphoteric)-coating (hydrophilic) sandwich spin-coating strategy to form all biomass-based Janus film. The oxalic acid hydrolyzed nanochitin (OAChN) was applied as a transition layer that enabled successful spin-coating of the hydrophilic nanocellulose (TEMPO-oxidized cellulose nanofiber, TOCN) and nanochitin (partially deacetylated chitin nanofibers, DEChN) on the hydrophobic polylactic acid (PLA) film substrate. In which a layer-by-layer (LBL) assembling of TOCN (carboxyl-rich negative surface charge) and DEChN (amino-rich positive surface charge) was designed to form a thickness and surface property controllable polysaccharide coating on PLA. The finally formed PLA-OAChN-TOCN/DEChN (LBL) film showed hydrophilic and hydrophobic heteromeric faces at the opposite sides and thus had improved fog water collection capacity of 90.85 mg·cm-2·h-1 (30 layers of TOCN/DEChN spin-coated on PLA), which was 276 % higher than the pure PLA film. The transition layer engaged sandwich spin-coating strategy, together with LBL assembling method proposed in this study provided a feasible fabrication of all biomass-based fog water collectors (FWC) that could contribute to alleviating water shortage.

Development of ternary polymeric films based on cassava starch, pea flour and green banana flour for food packaging

The development of alternative materials to replace plastics used in food packaging is an important approach to reducing environmental pollution and minimizing harmful impacts on ecosystems. In this study, biopolymeric films were formulated using cassava starch (Manihot esculenta Crantz), pea flour (Pisum sativum) and green banana flour (Musa sp.) to obtain a material for application in food packaging. The influence of a plasticizer on the optical and physicochemical properties of the films was analyzed and the synergy between higher concentrations of starch and plasticizer resulted in films with low opacity. In addition, the morphology, thermal, mechanical and barrier properties were examined. The film with the best formulation (p < 0.05) contained 12 g cassava starch, 3.6 g pea flour and 30 % glycerol (the maximum levels of the experiment). This film presented average values of thickness, moisture, solubility, opacity, maximum strength (F), maximum tensile stress (σ), elongation at break (ε) and elasticity (E) of 0.47 mm, 19.95 %, 87.45 %, 20.93 %, 9.30 N, 1.75 MPa, 30.10 % and 5.93 %, respectively. This research demonstrates the potential application of films obtained by combining starches from different sources. The sustainable production of environmentally-friendly packaging provides an alternative to fossil-based plastics, which have well-documented adverse effects on the environment.

Development of seaweed-derived polysaccharide/cellulose nanocrystal-based antifogging labels loaded with alizarin for monitoring aquatic products' freshness

Intelligent freshness indicator labels have attracted great interest for their massive potential in monitoring the freshness of aquatic products over the years. However, there is still a challenge where fogging on the labels during dramatic temperature changes affects the reading of freshness. At the same time, the freshness indicator labels need high mechanical strength to resist collision damage during transportation and storage. Herein, an antifogging freshness indicator label was developed based on seaweed extracts and alizarin. Firstly, soluble polysaccharides and insoluble components were extracted from Gelidium amansii, and cellulose nanocrystal (CNC) was further prepared from the insoluble components by sulfuric acid hydrolysis. Subsequently, a polysaccharide-based film was fabricated using soluble polysaccharides as the matrix materials and CNC as the reinforcement agent. Antifogging experiments showed that the hydrophilic composite films presented good antifogging performance. After loading with alizarin, the composite indicator label exhibited both antifogging and freshness-indicating properties for the salmon sample. The work provided a new idea for developing freshness indicator labels suitable for low-temperature transportation and storage.

Enhanced mechanical and functional properties of chitosan/polyvinyl alcohol/hydroxypropyl methylcellulose/alizarin composite film by incorporating cinnamon essential oil and tea polyphenols

In this study, cinnamon essential oil and tea polyphenols were added to chitosan/ polyvinyl alcohol/ hydroxypropyl methylcellulose/ alizarin composite films to enhance their mechanical and functional properties. Their addition to the composite films enhanced their antibacterial and antioxidant properties and significantly improved its elongation at break (p < 0.05). Cinnamon essential oil reduced the water vapor permeability, water content, and water solubility of composite films and improved their transparency. The composite films with additive exhibited excellent UV-barrier ability and pH responsivity. Fourier Transform infrared spectroscopy and X-Ray Diffraction analyses confirmed hydrogen bond formation between the polymer molecules and additives. The results of Scanning Electron Microscope-Focused Ion Beam revealed improved surface and cross-section morphology of the films, leading to the generation of a cross-linked structure. Thermogravimetric and differential scanning calorimetry analysis indicated enhanced thermal stability of the composite films upon cinnamon essential oil addition. Analysis of storage quality indicators (TBARS value, TVC, and TVB-N) revealed that the composite films could prolong the freshness of surimi. The incorporation of cinnamon essential oil and tea polyphenols into the composite films has demonstrated significant potential as an effective and natural alternative for active food packaging.

Furoic acid-mediated konjac glucomannan/flaxseed gum based green biodegradable antibacterial film for Shine-Muscat grape preservation

Considering the growing threats to the environment and human health, such as plastic pollution and food spoilage, the development of naturally antibacterial food packaging materials with biodegradable capabilities has recently attracted considerable attention. This work applies the concept of green environmental protection to packaging technology, and a new type of green edible antibacterial packaging film was developed. The basic idea is to incorporate furoic acid (FA), which possesses excellent antibacterial activity, into the flaxseed gum and konjac glucomannan matrix (FK) as a filler to obtain a series of FK-FA bioactive films. This incorporation simultaneously improves the hydrophobicity and UV-barrier ability by 12.28 % and 42.87 %, respectively. Meanwhile, the diameters of the antibacterial zone of the FK-FA0.4% films (composite FK films containing 0.4 % FA) against E. coli and S. aureus increased to 38.98 mm and 36.29 mm from 24.00 mm of pure FK film, respectively. As a consequence, the grape sample sealed with FK-FA0.4% film remained edible on the 18th day of storage, while those packaged with commercial PE film and pure FK were seriously rotted and lost edible value on the 12th day, further confirming the enhanced preservation capacity. Finally, the as-prepared films were established to be biodegradable and were almost completely degraded within 25 days under simulated environmental conditions. Overall, these promising results show the potential of FK-FA films for replacing plastic packaging materials as eco-friendly edible films with prolonged shelf life for active packaging.

Anthocyanin-loaded bacterial cellulose nanofiber as a green sensor for monitoring the selective naked eye and visual detection of Al(III) Ions

The present study developed a green metallochromic sensor that detects aluminium (Al(III)) ions in solution and solid state using anthocyanin extract from purple onion peels embedded in bacterial cellulose nanofibers (BCNFs). The CIE Lab colour parameters demonstrated that Al(III) binding causes a sensible change in colour. A variety of metal ions including K+, Mn2+, Cu2+, Hg2+, Cr2+, Pb2+ and Ni2+ were used to challenge the sensor to determine its selectivity. The findings demonstrated that the suggested sensor showed excellent selectivity toward Al(III) ion. Al(III) is quantitatively detected by the sensing method with detection limits in the range between 30-200 and 20-300 ppm in solution and solid state, respectively, and through observation with naked eye. The fabricated green metallochromic sensor is promising to be a simple, cheap, mobile and easily operable for real-time and on-site detection of Al(III) ions in food matrices.

Chitosan/tannic acid phenamine networks-hollow mesoporous silica capsules with reversible pH response: Controlled-releasing amino acid derivatives as "green" corrosion inhibitor

A novel amino acid derivative (SM) was synthesized through Schiff base reaction between syringaldehyde (SA) and methionine (MTI), and loaded to obtain a reversible pH-responsive releasing corrosion inhibitor silica capsule (CS/TA@SM@HMSs) with chitosan/tannic acid phenamine networks on the surface. The corrosion inhibition effect of SM and CS/TA@SM@HMSs on Q235 was studied using electrochemical techniques and surface analysis. The results showed the maximum inhibition efficiency of SM reached to 93.2 % at 200ppm by immersing Q235 in 3.5 wt% NaCl solution. The theoretically calculated electron parameter (the energy gap ΔE = 4.492 eV) indicated that SM molecules were more susceptible to electron transfer with iron surfaces therefore allowing better adsorption on carbon steel surfaces to prevent corrosion. Meanwhile, UV-visible measurements showed that the chitosan/tannic acid phenamine network on the capsule surface responded to changes in pH. The reversible pH-responsive corrosion inhibitor capsule can be switched on and off several times to release SM, demonstrating reversible release and efficient corrosion protection. This study proposes a novel class of "green" amino acid derivative corrosion inhibitors, and establishes a controllable, efficient and reversible pH-responsive release system. A new approach is provided to stimulating the release of corrosion inhibitors in response to long-term corrosion protection of metals.

The highly stable indicator film incorporating roselle anthocyanin co-pigmented with oxalic acid: Preparation, characterization and freshness monitoring application

A novel stable PVA/HPMC/roselle anthocyanin (RAE) indicator film co-pigmented with oxalic acid (OA) was prepared, its properties, application effects and stability enhancement mechanism were investigated correspondingly. The structural characterization revealed that more stable network was formed due to the co-pigmentation facilitated generation of molecular interactions. Meanwhile, the co-pigmentation improved film mechanical and hydrophobic properties compared to both PVA/HPMC/RAE newly prepared (PHRN) or stored (PHRS) film, expressing as higher tensile strength values (12.25% and 14.44% higher than PHRN and PHRS), lower water solubility (7.22% and 10.09% lower than PHRN and PHRS) and water vapor permeability values (33.20% and 21.05% lower than PHRN and PHRS) of PVA/HPMC/RAE/OA newly prepared (PHON) or stored (PHOS) film. Compared with the PHRS film, the PHOS film still presented more distinguishable color variations when being applied to monitor shrimp freshness, owing to the stabilization behaviors of co-pigmentation in anthocyanin conformation. Hence, the co-pigmentation was an effective strategy to enhance film stability, physical and pH-responsive properties after long term storage, leading to better film monitoring effects when applied in real-time freshness monitoring.

pH-responsive double-layer film based on chitosan/curcumin-β-cyclodextrin complex/cinnamaldehyde and zein/alizarin for pork freshness monitoring and maintaining

A pH-responsive double-layer film comprising chitosan (CS), zein (Z), curcumin-β-cyclodextrin complex (Cur- β-CD), alizarin (AL) and cinnamaldehyde (CIN) was developed to detect spoilage and prolong the shelf life of pork. The outer Z/AL is the colorimetric responsive and highly protective outer layer, while the CS/Cur- β-CD/CIN is the fluorescence responsive and functional layer. The CS/Cur- β-CD/CIN-Z/AL film demonstrated excellent barrier properties against oxygen (8.48 × 10-13 g (m s Pa)-1) and water (2.42 × 10-11 g (m s Pa)-1) primarily due to the polar interactions in the Z structure and its hydrophobic nature. The addition of AL and Cur provided the CS/Cur- β-CD/CIN-Z/AL film with pH colorimetric and fluorescence response capabilities, respectively. Furthermore, the inclusion of Cur- β-CD, CIN and AL significantly enhanced the film's antioxidant and antibacterial properties, with radical scavenging rates of 79.29 % (DPPH) and 89.84 % (ABTS), as well as antibacterial efficiencies of 96.2 % (S. aureus) and 85.78 % (E. coli). To test the effectiveness of the double-layer film, a freshness monitoring and maintenance experiment was conducted on pork stored at 4 °C for 8 days. Various parameters of pork, including surface color, pH value, total volatile bases nitrogen (TVB-N), total viable counts (TVC), thiobarbituric acid reactive substance (TBARS), hardness and springiness, were measured, along with the color and fluorescence intensity (FL) of the film. The shelf life of the pork was extended by at least 2 days compared to the control group, and the pork was considered inedible if ΔE ≥ 12 or FL intensity ≤ 2160. Overall, this food packaging film shows promise in simultaneously monitoring and maintaining the freshness of pork.

Chitosan Film Sensor for Ammonia Detection in Microdiffusion Analytical Devices

Chitosan films have attracted increased attention in the field of sensors because of chitosan's unique chemico-physical properties, including high adsorption capacity, filmability and transparency. A chitosan film sensor was developed through the dispersion of an ammonia specific reagent (Nessler's reagent) into a chitosan film matrix. The chitosan film sensor was characterized to assess the film's properties by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). A gas diffusion device was prepared with the chitosan film sensor, enabling the collection and detection of ammonia vapor from biological samples. The chitosan film sensor color change was correlated with the ammonia concentration in samples of human serum and artificial urine. This method enabled facile ammonia detection and concentration measurement, making the sensor useful not only in clinical laboratories, but also for point-of-care devices and wherever there is limited access to modern laboratory facilities.

The potential of curcumin-based co-delivery systems for applications in the food industry: Food preservation, freshness monitoring, and functional food

Currently, curcumin-based co-delivery systems are receiving widespread attention. However, a systematic summary of the possibility of curcumin-based co-delivery systems used for the food industry from multiple directions based on the functional characteristics of curcumin is lacking. This review details the different forms of curcumin-based co-delivery systems including the single system of nanoparticle, liposome, double emulsion, and multiple systems composed of different hydrocolloids. The structural composition, stability, encapsulation efficiency, and protective effects of these forms are discussed comprehensively. The functional characteristics of curcumin-based co-delivery systems are summarized, involving biological activity (antimicrobial and antioxidant), pH-responsive discoloration, and bioaccessibility/bioavailability. Correspondingly, potential applications for food preservation, freshness detection, and functional foods are introduced. In the future, more novel co-delivery systems for active ingredients and food matrices should be developed. Besides, the synergistic mechanisms between active ingredients, delivery carrier/active ingredient, and external physical condition/active ingredient should be explored. In conclusion, curcumin-based co-delivery systems have the potential to be widely used in the food industry.

Preparation of chitosan/gelatin-based functional films integrated with carbon dots from banana peel for active packaging application

Carbon dots (CDs) were manufactured with banana peels using a hydrothermal method (200 °C for 6 h). The synthesized CDs were spherical particles with a size of 1-3 nm having carboxyl groups and amine groups on the surface. CDs have been impregnated into chitosan/gelatin films to synthesize multifunctional packaging films. The composite film showed a slight decrease in transparency but a significant increase in UV protection properties. The fabricated film displayed strong antioxidant efficacy showing >74 % DPPH and 99 % ABTS radical scavenging potential. The film also unveiled substantial antibacterial activity against the foodborne pathogenic bacteria, Listeria monocytogenes, fully eliminating the growth of these bacteria within 6 h of exposure. The chitosan/gelatin film containing CD was used for minced meat packaging, and the film delayed bacterial growth (< 1 Log CFU/g after 24 h) and maintained the meat color even after 24 h of storage at 20 °C. The CD-added chitosan/gelatin functional film has a high probability of application in active food packaging, especially for extending the shelf life of packaged meat and maintaining its aesthetic quality.

Multifunctional chromone-incorporated poly(hydroxybutyrate) luminescent film for active and intelligent food packaging

The major objective of present work was to fabricate poly(hydroxybutyrate) based luminescent films for genuine food packaging applications. These films were synthesized by incorporating varying Chromone (CH) concentrations (5, 10, 15, 20, and 25 wt%) into poly(hydroxybutyrate) (PHB) matrix through solvent-casting. Different characteristics of prepared films were examined using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Mechanical testing, and Time-resolved photoluminescence (TRPL). UV-blocking properties and water vapor permeation were also examined. FTIR spectra indicated the occurrence of hydrogen bonding between PHB and CH. Among all prepared film samples, PHB/CH15 showed maximum tensile strength (22.5 MPa) with enhanced barrier ability against water vapor and UV rays, thermal stability, and luminescent performance. After overall analysis, PHB/CH15 film was selected to investigate its X-ray diffraction, release behavior, DPPH scavenging, and antimicrobial potential. Release kinetics revealed that the cumulative release percentage of CH was higher in fatty acid stimulant. Moreover, results suggested that this film demonstrated antioxidant activity (>55 %) and superior antimicrobial potential against Aspergillus niger, Staphylococcus aureus, and Escherichia coli. Furthermore, packaging of bread samples using PHB/CH15 film demonstrated the complete inhibition of microbial growth in bread up to 10 days of storage and ensure the safety of genuine food products.

Fabricating a visibly colorimetric film via self-releasing of anthocyanins from distributed mulberry pomace particles in hydrophilic sodium carboxymethyl starch-based matrix to monitor meat freshness

A highly distinguishable indicator film was developed based on sodium carboxymethyl starch, κ-carrageenan, carboxylated cellulose nanocrystals and mulberry pomace particles (MPPs). As the content of MPPs increased from 0 % to 6 %, the tensile strength decreased from 11.71 MPa to 5.20 MPa, the elongation at break increased from 26.84 % to 43.76 %, respectively, and the haze increased from 34.12 % to 52.10 %. The films accurately exhibit a color change from purple to blue-green under alkaline conditions. The enhanced haze improved the visible resolution of the films during the color-changing process. The films with the size of 7.50 mm × 7.50 mm and 10.0 mm × 10.0 mm exhibited obvious color changes when the total volatile basic nitrogen reached 14.60 mg/100 g and 19.04 mg/100 g, respectively, which accurately indicated the quality of pork and fish. This study will offer a simplified path to improve both accurate sensitivity and distinguishability for smart films.

Boosting functional properties of active-CMC films reinforced with agricultural residues-derived cellulose nanofibres

The search for packaging alternatives that reduce the presence of non-biodegradable plastics in water is a focus of much research today. This fact, together with the increasing demand for active packaging capable of prolonging the shelf life of foodstuffs and the rise in the use of natural biopolymers such as cellulose, motivate the present work. This work evaluates CMC films loaded with gallic acid reinforced with (ligno)cellulose nanofibres from various agricultural residues as candidates for use in active food packaging. The first stage of the study involved the evaluation of different nanofibres as the reinforcing agent in CMC films. Increasing proportions of nanofibres (1, 3, 5 and 10% w/w) from horticultural residues (H) and nanofibres from vine shoots (V), containing residual lignin (LCNF) and without it (CNF), and obtained by mechanical (M) or chemical (T) pretreatment, were studied. The results of this first stage showed that the optimum reinforcement effect was obtained with 3% H-MCNF or 3% V-MCNF, where up to 391% and 286% improvement in tensile strength was achieved, respectively. These films offered slightly improved UV-light blocking ability (40-55% UV-barrier) and water vapor permeability (20-30% improvement) over CMC. Next, bioactive films were prepared by incorporating 5 and 10% wt of gallic acid (GA) over the optimised formulations. It was found that the joint addition of cellulose nanofibres and GA enhanced all functional properties of the films. Mechanical properties improved to 70%, WVP to 50% and UV light blocking ability to 70% due to the synergistic effect of nanofibres and GA. Finally, the bioactive films exhibited potent antioxidant activity, 60-70% in the DPPH assay and >99% in the ABTS assay and high antimicrobial capacity against S. aureus.

Development of a green metallochromic indicator for selective and visual detection of copper(II) ions

Heavy metal ions, i.e., copper(II) (Cu(II)), are harmful to the environment and our health. The current research established an eco-friendly and efficient metal-sensitive indicator, which can identify Cu(II) ions in both liquid and solid forms, by utilizing anthocyanin extract obtained from jambolao fruit (Syzgium cumini) that is incorporated within bacterial cellulose nanofibers (BCNF).The CIE Lab color parameters demonstrated that Cu(II) binding causes a sensible change in color. It was observed that the visible color altered with an increase in the Cu(II) concentration. The bacterial cellulose nanofibers that were altered with anthocyanin were analyzed using ATR-FTIR and FESEM. The sensor's selectivity was tested by using a range of metal ions such as lead (Pb2+), cobalt (Co2+), cadmium (Cd2+), nickel (Ni2+), aluminium (Al3+), barium (Ba2+), manganese (Mn2+), zinc (Zn2+), mercury (Hg2+) and sodium (Na+). The findings demonstrated that the suggested sensor showed excellent selectivity toward Cu(II) ion. Cu(II) can be accurately identified using the sensing technique, with detection limits ranging from 10-400 ppm and 50-500 ppm for liquid and solid samples, respectively, and through observation with naked eye. The fabricated green metallochromic sensor is promising to be a simple, cheap, mobile and easily operable for the real-time and on-site detection of Cu(II) ion.

Novel “all-in-one” multifunctional gelatin-based film for beef freshness maintaining and monitoring

In this study, a novel multifunctional food packaging was developed by incorporating alizarin (AL) and oregano essential oil Pickering emulsion (OEOP) into a gelatin film matrix. The incorporation of OEOP and alizarin improved the UV-vis resistance property of the film, blocking almost all UV-vis light (decreasing 71.80% to 0.06% at 400 nm). The elongation-at-break (EBA) was 4.02 times of that of gelatin film, indicating the improved mechanical properties of the films. This film showed a significant color change from yellow to purple in the pH range of 3-11 and a considerable sensitivity to ammonia vapor within 4 min, which was attributed to the deprotonation of the alizarin molecule. The film's antioxidant and dynamic antimicrobial capacity was significantly improved owing to the sustained release effect of OEOP. Furthermore, the multifunctional film effectively slowed down the beef spoilage rate and provided real-time visual monitoring of freshness through color changes. Additionally, the color change of the beef quality was linked to the RGB values of the film through a smartphone APP. Overall, this work broadens the possibilities of applications in the food packaging industry for multifunctional food packaging film with preservation and monitoring functions.

Facile Fabrication of Anthocyanin-Nanocellulose Hydrogel Indicator Label for Intelligent Evaluation of Minced Pork Freshness

In order to develop a reliable and rapid method for meat freshness detection, nanocellulose (TOCNF) prepared via the TEMPO (2,2,6,6-tetramethylpiperidine oxidation) oxidation method was used as raw material to prepare hydrogels using Zn²⁺ coordination and binding. Physicochemical properties such as water absorption and porosity were analyzed. It was further used to select suitable hydrogels for the preparation of indication labels after anthocyanin adsorption, and it was applied in the freshness detection of fresh minced pork. Five percent TOCNF (w/w) aqueous solution was homogenized by high shear for 4 min, and 20% (w/w) zinc chloride solution was added to it, so that the concentration of zinc ions could reach 0.25 mol/L. After standing for 24 h, the hydrogel was obtained with good water absorption and a porous three-dimensional network structure. The activation energies of volatile base nitrogen (TVBN) and anthocyanin indicating label color changes were 59.231 kJ/mol and 69.453 kJ/mol, respectively. The difference between the two is within 25 kJ/mol, so the prepared indicator label can accurately visualize the shelf life of fresh pork.

Development of a pH-sensing indicator for shrimp freshness monitoring: Curcumin and anthocyanin-loaded gelatin films

An intelligent pH-sensing indicator containing Roselle (Hibiseus sabdariffa L.) (RS) anthocyanin and curcumin (CR) was developed and characterized as on-package indicator tags to check the freshness of shrimp during the storage at 4°C. FE-SEM and FT-IR analysis showed that RS and CR were successfully immobilized in the gelatin-glycerol film-forming substrate. The addition of various natural dyes increased the thickness and antioxidant action of the colorimetric film. To assess the response to changes in the pH, the colorimetric film was immersed in different buffers. Based on volatile amines secreted by shrimp, a test application of a colorimetric film containing natural dyes at a ratio of CR:RS = 1:4 (v/v) was conducted in shrimp at 4°C. The total volatile basic nitrogen (TVB-N) and the pH of shrimp were monitored during refrigerated storage for 10 days, and the color changes of the indicator were recorded simultaneously. The results indicated that the designed colorimetric film could produce various colors, which are thought to be indicative of the freshness and spoilage of packaged shrimp. Therefore, the target film can be utilized as a promising smart packaging material for monitoring the freshness of shrimp and aquatic products in real time.

Natural Plant-Derived Compounds in Food and Cosmetics: A Paradigm of Shikonin and Its Derivatives

Shikonin and its derivatives are the natural naphthoquinone compounds produced in the roots of the Boraginaceae family. These red pigments have been used for a long time in coloring silk, as food colorants, and in the Chinese traditional system of medicines The resurgence of public interest in natural and plant-based products has led to this category of compounds being in high demand due to their wide range of biological activities including antioxidant, antitumor, antifungal, anti-inflammatory ones. Different researchers worldwide have reported various applications of shikonin derivatives in the area of pharmacology. Nevertheless, the use of these compounds in the food and cosmetics fields needs to be explored more in order to make them available for commercial utilization in various food industries as a packaging material and to enhance their shelf life without any side effects. Similarly, the antioxidant properties and skin whitening effects of these bioactive molecules may be used successfully in various cosmetic formulations. The present review delves into the updated knowledge on the various properties of shikonin derivatives in relation to food and cosmetics. The pharmacological effects of these bioactive compounds are also highlighted. Based on various studies, it can be concluded that these natural bioactive molecules have potential to be used in different sectors, including functional food, food additives, skin, health care, and to cure various diseases. Further research is required for the sustainable production of these compounds with minimum disturbances to the environment and in order to make them available in the market at an economic price. Simultaneous studies utilizing recent techniques in computational biology, bioinformatics, molecular docking, and artificial intelligence in laboratory and clinical trials would further help in making these potential candidates promising alternative natural bioactive therapeutics with multiple uses.

Covalently phenolated-β-lactoglobulin-pullulan as a green halochromic biosensor efficiency monitored Barramundi fish's spoilage

The effect of the covalent binding between anthocyanins extracted from purple potato peels and beta-lactoglobulin (β-Lg) on its ability to fabricate a green/smart halochromic biosensor combined with pullulan (Pul) was studied. The physical, mechanical, colorimetry, optical, morphological, stability, functionality, biodegradability, and applicability of β-Lg/Pul/Anthocyanin biosensors to monitor the Barramundi fish's freshness during storage were entirely evaluated. The docking and multispectral results proved that β-Lg could be successfully phenolated with anthocyanins and subsequently interacted with Pul via H-bonding and other forces which mainly subsequently form the smart biosensors. Phenolation with anthocyanins significantly heightened the mechanical, moisture resistance, and thermal steadiness of β-Lg/Pul biosensors. Anthocyanins also nearly duplicated the bacteriostatic and antioxidant activities of β-Lg/Pul biosensors. The biosensors changed the color associated with the loss in freshness of the Barramundi fish, mostly due to the ammonia production and pH-alteration throughout fish deterioration. Most importantly, β-Lg/Pul/Anthocyanin biosensors are biodegradable and decomposed within ∼30 d of simulated environmental circumstances. Overall, β-Lg/Pul/Anthocyanin smart biosensors could minimize the usage of plastic packaging materials and employ to monitor the freshness of stored fish and fish-stuffs.

Anthocyanin-induced color changes in bacterial cellulose nanofibers for the accurate and selective detection of Cu(II) in water samples

The environment and our health are negatively impacted by heavy metal ions, like Cu(II). The present study developed a green and effective metallochromic sensor that detects copper (Cu(II)) ions in solution and solid state using anthocyanin extract from black eggplant peels embedded in bacterial cellulose nanofibers (BCNF). Cu(II) is quantitatively detected by the sensing method with detection limits between 10-400 ppm and 20-300 ppm in solution and solid state, respectively. In the solution state, we depicted a sensor for Cu(II) ions in aqueous matrices in the pH range from 3.0 to 11.0, with the capability to produce a visual color change from brown to light blue and dark blue depending on the Cu(II) concentration. Additionally, BCNF-ANT film can act as a sensor for Cu(II) ions in the pH range of 4.0-8.0. Neutral pH was selected from the standpoint of high selectivity. It was found that visible color changed when Cu(II) concentration was increased. Bacterial cellulose nanofibers modified with anthocyanin were characterized with ATR-FTIR and FESEM. Various metal ions, including Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺, Al³⁺, Ba²⁺, Hg²⁺, Mg²⁺, and Na⁺, were used to challenge the sensor to determine its selectivity. Anthocyanin solution and BCNF-ANT sheet were employed in the actual tap water sample successfully. The results also clarified that the various foreign ions did not significantly interfere with Cu(II) ions detection at optimum conditions. Compared to previously developed sensors, no electronic components, trained personnel, or sophisticated equipment were needed to apply the colorimetric sensor developed in this research. Cu(II) contamination in food matrices and water can be monitored on-site easily.

Hybrid Cryogels with Superabsorbent Properties as Promising Materials for Penicillin G Retention

This present study describes the investigation of new promising hybrid cryogels able to retain high amounts of antibiotics, specifically penicillin G, using chitosan or chitosan-biocellulose blends along with a naturally occurring clay, i.e., kaolin. In order to evaluate and optimize the stability of cryogels, three types of chitosan were used in this study, as follows: (i) commercial chitosan; (ii) chitosan prepared in the laboratory from commercial chitin; and (iii) chitosan prepared in the laboratory from shrimp shells. Biocellulose and kaolin, previously functionalized with an organosilane, were also investigated in terms of their potential to improve the stability of cryogels during prolonged submergence under water. The organophilization and incorporation of the clay into the polymer matrix were confirmed by different characterization techniques (such as FTIR, TGA, SEM), while their stability in time underwater was investigated by swelling measurements. As final proof of their superabsorbent behavior, the cryogels were tested for antibiotic adsorption in batch experiments, in which case cryogels based on chitosan extracted from shrimp shells seem to exhibit excellent adsorption properties for penicillin G.

pH-sensitive smart indicators based on cellulose and different natural pigments for tracing kimchi ripening stages

Five natural pigments including water-soluble [butterfly pea (BP), red cabbage (RC), and aronia (AR)] and alcohol-soluble [shikonin (SK) and alizarin (ALZ)] were extracted, characterized, and loaded onto cellulose for preparing pH-sensitive indicators. The indicators were tested their color response efficiency, gas sensitivity, response to lactic acid, color release, and antioxidant activity. Cellulose-water soluble indicators showed more obvious color changes than alcohol-soluble indicators in lactic acid solution and pH solutions (1-13). All cellulose-pigment indicators exhibited prominent sensitivity to ammonia compared to acidic vapor. Antioxidant activity and release behavior of the indicators were influenced by pigment type and simulants. Kimchi packaging test was carried out using original and alkalized indicators. The alkalized indicators were more effective in showing visible color changes during kimchi storage than the original indicators, and cellulose-ALZ displayed the most distinct color change from violet (fresh kimchi, pH 5.6, acidity 0.45 %) to gray (optimum fermented kimchi, pH 4.7, acidity 0.72 %), and to yellow (over fermented kimchi, pH 3.8, acidity 1.38 %) which followed by BP, AR, RC, SK respectively. The findings of the study suggest that the alkalization method could be used to show noticeable color changes in a narrow pH range for application with acidic foods.

Effect of neutralization treatment on properties of chitosan/bamboo leaf flavonoids/nano-metal oxide composite films and application of films in antioxidation of rapeseed oil

Neutralization treatment improved the slow-release antioxidant food packaging function of chitosan (CS)/bamboo leaf flavone (BLF)/nano-metal oxides composite films. The film cast from the CS composite solution neutralized by KOH solution had good thermal stability. The elongation at break of the neutralized CS/BLF film was increased by about 5 times, which provided the possibility for its packaging application. After 24 h of soaking in different pH solutions, the unneutralized films swelled severely and even dissolved, while the neutralized films maintained the basic structure with a small degree of swelling, and the release trend of BLF conformed to the logistic function (R² ≥ 0.9186). The films had a good ability to resist free radicals, which was related to the release amount of BLF and the pH of the solution. The antimicrobial neutralized CS/BLF/nano-ZnO film, like the nano-CuO and Fe₃O₄ films, were effective in inhibiting the increase in peroxide value and 2-thiobarbituric acid induced by thermal oxygen oxidation of rapeseed oil and had no toxicity to normal human gastric epithelial cells. Therefore, the neutralized CS/BLF/nano-ZnO film is likely to become an active food packaging material for oil-packed food, which can prolong the shelf life of packaged food.

Design of Biodegradable, Climate-Specific Packaging Materials That Sense Food Spoilage and Extend Shelf Life

The AgriFood systems in tropical climates are under strain due to a rapid increase in human population and extreme environmental conditions that limit the efficacy of packaging technologies to extend food shelf life and guarantee food safety. To address these challenges, we rationally designed biodegradable packaging materials that sense spoilage and prevent molding. We nanofabricated the interface of 2D covalent organic frameworks (COFs) to reinforce silk fibroin (SF) and obtain biodegradable membranes with augmented mechanical properties and that displayed an immediate colorimetric response (within 1 s) to food spoilage, using packaged poultry as an example. Loading COF with antimicrobial hexanal also mitigated biotic spoilage in high-temperature and -humidity conditions, resulting in a four-order of magnitude decrease in the total amount of mold growth in soybeans packaged in silk-COF, when compared to cling film (i.e., polyethylene). Together, the integration of sensing, structural reinforcement, and antimicrobial agent delivery within a biodegradable nanocomposite framework defines climate-specific packaging materials that can decrease food waste and enhance food safety.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Sensing materials for fresh food quality deterioration measurement: a review of research progress and application in supply chain

Fresh food are consumed in large quantities worldwide. During the supply chain, microbial growth in fresh food can lead to the production of a number of metabolites, which make food highly susceptible to spoilage and contamination. The quality of fresh food changes in terms of smell, tenderness, color and texture, which causes a decrease in freshness and consumers acceptance. Therefore, the quality monitoring of fresh food has become an essential part in the supply chain. As traditional analysis methods are highly specialized, expensive and have a small scope of application, which cannot be applied to the supply chain to realize real-time monitoring. Recently, sensing materials have received a lot of attention from researchers due to the low price, high sensitivity and high speed. However, the progress of research on sensing materials has not been critically evaluated. The study examines the progress of research in the application of sensing materials for fresh food quality monitoring. Meanwhile, indicator compounds for spoilage of fresh food are analyzed. Moreover, some suggestions for future research directions are given.

Recent advancements in natural colorants and their application as coloring in food and in intelligent food packaging

Colorants are widely employed in the food industry as an essential ingredient in many products since color is one of the most valued attributes by consumers. Furthermore, the utilization of colorants is currently being extended to the food packaging technologies. The objective of this review was to compile recent information about the main families of natural coloring compounds, and to describe their real implications in food coloring. In addition, their technological use in different food systems (namely, bakery products, beverages, meat and meat products, and dairy products) and their utilization in intelligent packaging to monitor the freshness of foodstuffs with the aim of extending food shelf life and improving food properties was discussed. The potential of using natural colorant in different food to improve their color has been demonstrated, although color stability is still a challenging task. More interestingly, the application of intelligent colorimetric indicators to exhibit color changes with variations in pH can enable real-time monitoring of food quality.

Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations

Food loss and waste occur for many reasons, from crop processing to household leftovers. Even though some waste generation is unavoidable, a considerable amount is due to supply chain inefficiencies and damage during transport and handling. Packaging design and materials innovations represent real opportunities to reduce food waste within the supply chain. Besides, changes in people's lifestyles have increased the demand for high-quality, fresh, minimally processed, and ready-to-eat food products with extended shelf-life, that need to meet strict and constantly renewed food safety regulations. In this regard, accurate monitoring of food quality and spoilage is necessary to diminish both health hazards and food waste. Thus, this work provides an overview of the most recent advances in the investigation and development of food packaging materials and design with the aim to improve food chain sustainability. Enhanced barrier and surface properties as well as active materials for food conservation are reviewed. Likewise, the function, importance, current availability, and future trends of intelligent and smart packaging systems are presented, especially considering biobased sensor development by 3D printing technology. In addition, driving factors affecting fully biobased packaging design and materials development and production are discussed, considering byproducts and waste minimization and revalorization, recyclability, biodegradability, and other possible ends-of-life and their impact on product/package system sustainability.

The properties of pH-responsive gelatin-based intelligent film as affected by ultrasound power and purple cabbage anthocyanin dose

A pH-sensitive intelligent film was prepared using gelatin as base substrate and purple cabbage anthocyanins (PCA) as indicator with the aid of ultrasound. Fourier transforms infrared and X-ray diffraction analysis showed that 600 W ultrasound brought changes to characteristic bands of gelatin and PCA, and flattened diffraction peak around 2θ = 20°. Film prepared with 600 W ultrasound exhibited high tensile strength and elongation at break and showed high transition temperature and surface hydrophobicity by differential scanning calorimetry and contact angle analysis. The incorporation of <0.35 % PCA had no effect on mechanical properties of films, but it improved the antioxidative activity. Films with 0.14 %, 0.21 % and 0.28 % PCA suggested pronounced color difference at pH 5-8, in accordance with the sharp ΔE difference. Films with 0.28 % PCA was applied for monitoring chilled-stored fish quality. It showed visible color change from pink to atrovirens during storage. The difference of ΔE at various days was ≥5 and ΔE highly correlated with total volatile basic nitrogen. Therefore, gelatin along with PCA under appropriate ultrasound treatment could prepare intelligent film to preserve and monitor the quality of chilled-stored fish.

Targeted pH-responsive chitosan nanogels with Tanshinone IIA for enhancing the antibacterial/anti-biofilm efficacy

Persistent bacterial infection caused by biofilms is one of the most serious problems that threatened human health. The development of antibacterial agents remains a challenge to penetrate biofilm and effectively treat the underlying bacterial infection. In the current study, chitosan-based nanogels were developed for encapsulating the Tanshinone IIA (TA) to enhance the antibacterial and anti-biofilm efficacy against Streptococcus mutans (S. mutans). The as-prepared nanogels (TA@CS) displayed excellent encapsulation efficiency (91.41 ± 0.11 %), uniform particle sizes (393.97 ± 13.92 nm), and enhanced positive potential (42.27 ± 1.25 mV). After being coated with CS, the stability of TA under light and other harsh environments was greatly improved. In addition, TA@CS displayed pH responsiveness, allowing it to selectively release more TA in acidic conditions. Furthermore, the positively charged TA@CS were equipped to target negatively charged biofilm surfaces and efficiently penetrate through biofilm barriers, making it promising for remarkable anti-biofilm activity. More importantly, when TA was encapsulated into CS nanogels, the antibacterial activity of TA was enhanced at least 4-fold. Meanwhile, TA@CS inhibited 72 % of biofilm formation at 500 μg/mL. The results demonstrated that the nanogels constituted CS and TA had antibacterial/anti-biofilm properties with synergistic enhanced effects, which will benefit pharmaceutical, food, and other fields.

Turmeric carbon quantum dots enhanced chitosan nanocomposite films based on photodynamic inactivation technology for antibacterial food packaging

The increased demand for food quality and safety has led the food industry to pay urgent attention to new packaging materials with antimicrobial activity. In this study, we combined photodynamic inactivation of bactericidal technology in food packaging materials by incorporating fluorescent carbon quantum dots (CDs) prepared from the natural plant turmeric into a chitosan matrix to prepare a series of active composite food packaging films (CDs-CS). The chitosan film containing CDs had better mechanical properties, UV protection and hydrophobicity. Under irradiation with a 405 nm light source, the composite film was able to produce abundant reactive oxygen species, and the CDs-CS₂ film exhibited reductions of approximately 3.19 and 2.05 Log₁₀ CFU/mL for Staphylococcus aureus and Escherichia coli respectively within 40 min. In cold pork storage applications, CDs-CS₂ films showed inhibition of the growth of colonization in pork and retarded the spoilage of pork within 10 days. This work will provide new insights to explore safe and efficient antimicrobial food packaging.