Application potential of carbon nanotubes in water treatment: A review

Carbon Nanotubes (CNTs): A Potential Nanomaterial for Water Purification

Nanomaterials such as carbon nanotubes (CNTs) have been used as an excellent material for catalysis, separation, adsorption and disinfection processes. CNTs have grabbed the attention of the scientific community and they have the potential to adsorb most of the organic compounds from water. Unlike, reverse osmosis (RO), nanofiltration (NF) and ultrafiltration (UF) membranes aligned CNT membranes can act as high-flow desalination membranes. CNTs provide a relatively safer electrode solution for biosensors. The article is of the utmost importance for the scientists and technologists working in water purification technologies to eliminate the water crisis in the future. This review summarizes about the application of CNTs in water purification.

Removal of 17β-Estradiol by Activated Charcoal Supported Titanate Nanotubes (TNTs@AC) through Initial Adsorption and Subsequent Photo-Degradation: Intermediates, DFT calculation, and Mechanisms

A low-cost composite of activated charcoal supported titanate nanotubes (TNTs@AC) was developed via the facile hydrothermal method to remove the 17β-estradiol (E2, a model of pharmaceutical and personal care products) in water matrix by initial adsorption and subsequent photo-degradation. Characterizations indicated that the modification occurred, i.e., the titanate nanotubes would be grafted onto the activated charcoal (AC) surface, and the micro-carbon could modify the tubular structure of TNTs. E2 was rapidly adsorbed onto TNTs@AC, and the uptake reached 1.87 mg/g from the dual-mode model fitting. Subsequently, the adsorbed E2 could be degraded 99.8% within 2 h under ultraviolet (UV) light irradiation. TNTs@AC was attributed with a unique hybrid structure, providing the hydrophobic effect, π−π interaction, and capillary condensation for E2 adsorption, and facilitating the electron transfer and then enhancing photocatalytic ability for E2-degradation. In addition, the removal mechanism of E2 was elucidated through the density functional theory calculation. Our study is expected to provide a promising material for environmental application.

Increased Adsorption of Heavy Metal Ions in Multi-Walled Carbon Nanotubes with Improved Dispersion Stability

In recent years, carbon nanotubes (CNTs) have been intensively studied as an effective adsorbent for the removal of pollutants from wastewater. One of the main problems for its use corresponds to the agglomeration of the CNTs due to the interactions between them, which prevents using their entire surface area. In this study, we test the effect of dispersion of oxidized multi-walled carbon nanotubes (MWCNTs) on the removal of heavy metals from acidic solutions. For this, polyurethane filters were dyed with a well-dispersed oxidized MWCNTs solution using chemical and mechanical dispersion methods. Filters were used in column experiments, and the sorption capacity increased more than six times (600%) compared to experiments with suspended MWCNTs. Further, kinetic experiments showed a faster saturation on MWCNTs in column experiments. These results contribute to a better understanding of the effect of dispersion on the use of CNTs as heavy metal ions adsorbent.

Hybrid Materials Based on Carbon Nanotubes and Nanofibers for Environmental Applications

With the advances in material science, hybrid nanomaterials with unique mechanical, electrical, thermal and optical characteristics have been developed. Among them, hybrids based on filamentous forms of carbon, such as carbon nanotubes and carbon nanofibers, in combination with inorganic nanoparticles attract particular attention. Due to the structure and morphology, charge and energy transfer processes lead to synergistic effects that allow the use of less material with higher productivity. To clarify these issues, this review will summarize and discuss the relevant studies of the use of inorganic compounds of various chemical groups in modifying carbon nanomaterials for ecological applications.

Polymeric Nanofiber-Carbon Nanotube Composite Mats as Fast-Equilibrium Passive Samplers for Polar Organic Contaminants

To improve the performance of polymeric electrospun nanofiber mats (ENMs) for equilibrium passive sampling applications in water, we integrated two types of multiwalled carbon nanotubes (CNTs; with and without surface carboxyl groups) into polyacrylonitrile (PAN) and polystyrene (PS) ENMs. For 11 polar and moderately hydrophobic compounds (-0.07 ≤ logKOW ≤ 3.13), 90% of equilibrium uptake was achieved in under 0.8 days (t90% values) in nonmixed ENM-CNT systems. Sorption capacity of ENM-CNTs was between 2- and 50-fold greater than pure polymer ENMs, with equilibrium partition coefficients (KENM-W values) ranging from 1.4 to 3.1 log units (L/kg) depending on polymer type (hydrophilic PAN or hydrophobic PS), CNT loading (i.e., values increased with weight percent (wt %) of CNTs), and CNT type (i.e., greater uptake with carboxylated CNTs composites). During field deployment at Muddy Creek in North Liberty, Iowa, optimal ENM-CNTs (PAN with 20 wt % carboxylated CNTs) yielded atrazine concentrations in surface water with a 40% difference relative to analysis of a same-day grab sample. We also observed a mean percent difference of 30 (±20)% when comparing ENM-CNT sampler results to grab sample data collected within 1 week of deployment. With their rapid, high capacity uptake and small material footprint, ENM-CNT equilibrium passive samplers represent a promising alternative to complement traditional integrative passive samplers while offering convenience over large volume grab sampling.

MOFs-carbon hybrid nanocomposites in environmental protection applications

The demand for green engineering environmentally friendly nanomaterials had made carbon nanotube a suitable material to keep metal-organic frameworks (MOFs) in the application of wastewater treatment and air pollution monitoring systems. This review summarizes many of the recent research accomplishments in the synthesis of MOFs and MOFs-carbon hybrid nanocomposites for various applications such as wastewater treatment and removal of hazardous gases (CO, SO2, H2S and NH3) with emphasis on MOF/CNTs composites. This review focuses on the efficient removal of pollutants from the environment using adsorption techniques. Another important application of MOFs composite discussed in this review is sensor materials for environmental pollution.

Experimental and theoretical insight into hydroxyl and sulfate radicals-mediated degradation of carbamazepine

Carbamazepine (CBZ), a widely detected pharmaceutical in wastewaters, cannot currently be treated by conventional activated sludge technologies, as it is highly resistant to biodegradation. In this study, the degradation kinetics and reaction mechanisms of CBZ by hydroxyl radical (OH) and sulfate radical ()-based advanced oxidation processes (AOPs) were investigated with a combined experimental/theoretical approach. We first measured the UV absorption spectrum of CBZ and compared it to the theoretical spectrum. The agreement of two spectra reveals an extended π-conjugation system on CBZ molecular structure. The second-order rate constants of OH and with CBZ, measured by competition kinetics method, were (4.63 ± 0.01) × 10⁹ M^-1 s^-1 and (8.27 ± 0.01) × 10⁸ M^-1 s^-1, respectively at pH 3. The energetics of the initial steps of CBZ reaction with OH and were also calculated by density functional theory (DFT) at SMD/M05-2X/6-311++G**//M05-2X/6-31 + G**level. Our results reveal that radical addition is the dominant pathway for both OH and . Further, compared to the positive ΔG_R⁰ value for the single electron transfer (SET) reaction pathway between CBZ and OH, the ΔG_R⁰ value for SET reaction between CBZ and is negative, showing that this reaction route is thermodynamically favorable. Our results demonstrated the remarkable advantages of AOPs for the removal of refractory organic contaminants during wastewater treatment processes. The elucidation of the pathways for the reaction of OH and with CBZ are beneficial to predict byproducts formation and assess associated ecotoxicity, providing an evaluation mean for the feasibility of AOPs application.

Establishing structure-property-hazard relationships for multi-walled carbon nanotubes: the role of aggregation, surface charge, and oxidative stress on embryonic zebrafish mortality

Increasing use of carbon nanotubes (CNTs) in consumer and industrials goods increases their potential release, and subsequent risks to environmental and human health. Therefore, it is becoming ever more important that CNTs are designed to reduce or eliminate hazards and that hazard assessment methodologies are robust. Here, oxygen-functionalized multi-walled CNTs (O-MWCNTs), modified under varying redox conditions, were assessed for toxic potential using the zebrafish (Danio rerio) embryo model. Multiple physicochemical properties (e.g., MWCNT aggregate size, morphology, and rate; surface charge and oxygen concentration; and reactive oxygen species (ROS) generation) were characterized and related to zebrafish embryo mortality through the use of multivariate statistical methods. Of these properties, surface charge and aggregate morphology emerged as the greatest predictors of embryo mortality. Interestingly, ROS generation was not significantly correlated to observed mortality, contrary to prior predictions by nanotoxicology researchers. This suggests that the mechanism of MWCNT-induced mortality of embryonic zebrafish is physical, driven by electrostatic and shape effects, both of which are related to nanomaterial aggregation. This raises the importance of rigorously considering aggregation during aqueous-based nanotoxicology assays as nanomaterial aggregation can affect perceived nanomaterial toxicity. As such, future nanotoxicity studies relying on aqueous media must sufficiently consider nanomaterial aggregation.

Antifouling and antibacterial evaluation of ZnO/MWCNT dual nanofiller polyethersulfone mixed matrix membrane

The aim of this study is to evaluate the performance and antifouling properties of polyethersulfone (PES) membrane incorporated with dual nanofiller, zinc oxide (ZnO) and multi-walled carbon nanotube (MWCNT). The synergistic effect of the these nanofillers in PES membrane is studied by blending different ratio of ZnO/MWCNT nanofiller into the PES membrane. The fabricated membranes were characterized in terms of cross-section and surface morphology, surface hydrophilicity, pore size and porosity. The filtration performance of the membranes was tested using 50 mg/L humic acid (HA) solution as model solution. SEM image and gravimetric evaluation reported that the incorporation of both MWCNT and ZnO into the PES membrane improved porosity significantly up to 46.02%. Lower water contact angle of PES membrane incorporated with equal ratio of MWCNT and ZnO (PES 3) revealed that it has neat PES membrane properties and more hydrophilic membrane surface than single filler. PES 3 outperform other membranes with excellent HA permeate flux of 40.00 L/m².h and rejection of 88.51%. Due to hydrophilic membrane surface, PES 3 membrane demonstrate efficient antifouling properties with lower relative flux reduction (RFR) and higher flux recovery ratio (FRR). PES 3 also showed notable antibacterial properties with less bacterial attached to the membrane compared to neat PES membrane (PES 0).

Strong Electrochemiluminescence Emission from Oxidized Multiwalled Carbon Nanotubes

Carbon nanotubes (CNTs) as well-known nanomaterials are extensively studied and widely applied in various fields. Nitric acid (HNO₃ ) is often used to treat CNTs for purification purposes and preparing oxidized CNTs for various applications. However, too little attention is paid to investigating the effect of HNO₃ treatment on the optical properties of CNTs. In this work, it is observed for the first time that HNO₃ -oxidized multiwalled carbon nanotubes (ox-MWCNTs) have strong electrochemiluminescence (ECL) activity, which enables ox-MWCNTs to become new and good ECL carbon nanomaterials after carbon quantum dots (CQDs) and graphene quantum dots (GQDs). Various characterization technologies, such as transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy, are used to reveal the relationship between ECL activity and surface states. The ECL behaviors of ox-MWCNTs are investigated in detail and a possible ECL mechanism is proposed. Finally, the new ECL nanomaterials of ox-MWCNTs are envisioned to have promising applications in sensitive ECL sensing and in the study of CNT-based catalysts.

A critical review on organic micropollutants contamination in wastewater and removal through carbon nanotubes

The prevalence of organic micropollutants (OMPs) in various environmental compartments is posing a serious health risks to all kinds of lives on the planet. The levels of OMPs such as polyaromatic hydrocarbons, antibiotics, pesticides, contraceptive medicines, and personal care products in water bodies are increasing with each passing day. It is an urgent need of time to limit the release of OMPs into the environment, and to remove the prevailing OMPs for sustainable environmental management. The majority of the conventional means of water decontamination are either inefficient or expensive. However, due to nanosize, high surface area, and hollow and layered structure, carbon nanotubes (CNTs) serve as excellent sorbents for the removal of a diverse range of OMPs. The occurrence of emerging OMPs and their detrimental effects on human and animal health are collected and discussed in this review. The characteristics and efficacy of various CNTs (pristine and modified) for the efficient removal of different OMPs, and the removal mechanisms have been reviewed and discussed. The literature demonstrated that adsorption of OMPs onto CNTs is very complicated and rely on multiple factors including the properties of adsorbent and the adsorbate as well as solution chemistry. It was found that H-bonding, electrostatic interactions, van der Waals forces, hydrophobic interactions, H-π bongs, and π-π interactions were the major mechanisms responsible for the adsorption of OMPs onto various kinds of CNTs. Despite of higher affinities for OMPs, hydrophobicity and higher costs restrain the practical application of CNTs for wastewater treatment on large scale. However, continuous production may lead to the development of cost-effective, efficient and eco-friendly CTNs technology for wastewater treatments in future.

Cross-Linked Carbon Nanotube Adsorbents for Water Treatment: Tuning the Sorption Capacity through Chemical Functionalization

The development of carbon-based membrane adsorbent materials for water treatment has become a hot topic in recent years. Among them, carbon nanotubes (CNTs) are promising materials because of its large surface area, high aspect ratio, great chemical reactivity, and low cost. In this work, free-standing CNT adsorbents are fabricated from chemically cross-linked single-walled CNTs. We have demonstrated that by controlling the degree of cross-linking, the nanostructure, porous features, and specific surface area of the resulting materials can be tuned, in turn allowing the control of the adsorption capacities and the improvement of the adsorption performance. The cross-linked CNT adsorbents exhibit a notably selective sorption ability and good recyclability for removal of organics and oils from contaminated water.

Chromium ion removal from raw water by magnetic iron composites and Shewanella oneidensis MR-1

In this study, nanoiron active carbon composites (NZVI/GAC) were used to remove chromium ions from raw water. The composites were synthesized from a novel formula of biological activated carbon and characterized by various techniques. The adsorption test data were fit by a pseudo-second-order kinetic model and Langmuir model. The q_e and R² values were 187 mg Cr/g and 0.9960, respectively, with 0.2 g/L NZVI/GAC at an initial concentration of 118 mg/L Cr according to the Langmuir isotherm model. Moreover, a Cr⁶⁺ detoxification reactor was constructed with the magnetic iron composite. The results indicated that the synthesized magnetic iron composite was a significant adsorbent for Cr⁶⁺ removal from aqueous solutions. The detoxification reactor was able to remove Cr⁶⁺ from raw water at an initial concentration of 26.5 mg/L within a short time period (3–5 min), with a removal efficiency of up to 99.90% and a treatment capacity of 45.0 mg Cr⁶⁺/g of adsorbent; the Cr⁶⁺ concentrations in the outflow met the GB5749–2006 requirements for drinking water. A synergistic effect between NZVI/GAC and a suspension of the bacterium Shewanella oneidensis MR-1 was found, showing that this bacterium can be used as a regeneration agent for iron-depleted activated carbon materials.

A comparative study on ozone, hydrogen peroxide and UV based advanced oxidation processes for efficient removal of diethyl phthalate in water

Several Advanced Oxidation Processes (AOPs) including O₃/H₂O₂, O₃/TiO₂, O₃/activated carbon (AC), O₃/Al₂O₃, O₃/Fe²⁺/H₂O₂ and UV/TiO₂ have been investigated and compared for the removal of diethyl phthalate (DEP), an endocrine disrupting compound, in aqueous solutions. Hydroxyl radicals were the main species responsible for DEP degradation and this was supported by computational chemistry calculation, scavenger experiments, and LC/MS/MS analysis. The change of the abundance of reaction products over time was determined. Organic acids as well as anhydride and hydroxylated products were found to accumulate in solution even after long reaction time (2 h). Careful choice of the operating parameters (pH, ozone concentration and catalyst dosage) was crucial to achieve enhanced performance of the combined processes above what each oxidant and catalyst can achieve alone. O₃/AC process was found to reduce the oxidation efficiency of O₃ at high ozone concentrations. Heterogeneous catalytic ozonation with Al₂O₃ was the most effective process for DEP removal (∼100% removal in about 15 min) and based on pseudo-first-order kinetics at pH7, the studied oxidation processes followed the order: O₃/Al₂O₃(0.093 min^-1)>O₃/H₂O₂/Fe²⁺(0.076 min^-1)>O₃/AC(0.069 min^-1)>O₃/H₂O₂(0.053 min^-1)>O₃/TiO₂(0.050 min^-1)> O₃ alone (0.039 min^-1)>UV/TiO₂(0.009 min^-1).

Electrocatalytic water treatment using carbon nanotube filters modified with metal oxides

This study examined the electrocatalytic activity of multi-walled carbon nanotube (CNT) filters for remediation of aqueous phenol in a sodium sulfate electrolyte. CNT filters were loaded with antimony-doped tin oxide (Sb-SnO₂; SS) and bismuth- and antimony-codoped tin oxide (Bi-Sb-SnO₂; BSS) via electrosorption at 2 V for 1 h and then assembled into a flow-through batch reactor as anode-cathode couples with perforated titanium foils. The as-synthesized pristine CNT filters were composed of 50-60-nm-thick tubular carbons with smooth surfaces, whereas the tubes composing the SS-CNT and BSS-CNT filters were slightly thicker and bumpy, because they were coated with SS and BSS particles ~50 nm in size. Electrochemical characterization of the samples indicated a positive shift in the onset potential and a decrease in the current magnitude in the modified CNT filters due to passivation and oxidation inhibition of the bare CNT filters. These filters exhibited a similar adsorption capacity for phenol (5-8%), whereas loadings of SS and BSS enhanced the degradation rate of phenol by ~1.5 and 2.1 times, respectively. In particular, the total organic carbon removal performance and mineralization efficiency of the BSS-CNT filters were approximately twice those of the bare CNT filters. The BSS-CNT filters also exhibited an enhanced oxidation of ferrocyanide [Fe^II(CN)₆^4-], which was not adsorbed onto the CNT filters. The enhanced electrocatalytic performance of the modified CNT filters was attributed to an effective generation of OH radicals. The surfaces of the filters were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy.

A Review of Carbon Nanomaterials' Synthesis via the Chemical Vapor Deposition (CVD) Method

Carbon nanomaterials have been extensively used in many applications owing to their unique thermal, electrical and mechanical properties. One of the prime challenges is the production of these nanomaterials on a large scale. This review paper summarizes the synthesis of various carbon nanomaterials via the chemical vapor deposition (CVD) method. These carbon nanomaterials include fullerenes, carbon nanotubes (CNTs), carbon nanofibers (CNFs), graphene, carbide-derived carbon (CDC), carbon nano-onion (CNO) and MXenes. Furthermore, current challenges in the synthesis and application of these nanomaterials are highlighted with suggested areas for future research.

Remediation of water and wastewater by using engineered nanomaterials: A review

Nanotechnology is currently a fast-rising socioeconomic and political knowledge-based technology owing to the unique characteristics of its engineered nanomaterials. This branch of technology is useful for water and wastewater remediation. Many scientists and researchers have been conducting different studies and experiments on the applications of engineered nanomaterials at the local to international level. This review mainly aims to provide a current overview of existing knowledge on engineered nanomaterials and their applications in water and wastewater remediation. Furthermore, the present risks and challenges of nanotechnology are examined.

Magnetic Zr-MOFs nanocomposites for rapid removal of heavy metal ions and dyes from water

Amino-decorated Zr-based magnetic Metal-Organic Frameworks composites (Zr-MFCs) were prepared by a facile and efficient strategy. The nano-sized Fe₃O₄@SiO₂ core (about 15 nm) was coated with a shell of Zr-MOFs (about 5 nm) by means of in-situ growth. And, Fe₃O₄@SiO₂@UiO-66 and its amino derivatives (Fe₃O₄@SiO₂@UiO-66-NH₂ and Fe₃O₄@SiO₂@UiO-66-Urea) were successfully prepared by using different precursors. The obtained Zr-MFCs were demonstrated to be efficient adsorbents for metal ions/organic dyes removal from aqueous solution, with high adsorption capacity and fast adsorption kinetics. It was found that the amine-decorated MFCs were highly efficient for metal ions/dyes removal compared to raw MFC-O. Among them, MFC-N exhibited the highest capacity for Pb²⁺ (102 mg g^-1) and methylene blue (128 mg g^-1), while MFC-O exhibited the highest capacity for methyl orange (219 mg g^-1). Moreover, anionic and cationic dyes could be selectively separated and removed from the mixed solution just by adjusting the solution pH with Zr-MFCs as the adsorbents. And these Zr-MFCs materials can be easily regenerated by desorbing metal ions/organic dyes from the sorbents with appropriate eluents, and the adsorption capacity can be remained unchanged after 6 recycles. The obtained results demonstrated the great application potential of the prepared MFCs as fascinating adsorbents for water treatment.

A review of functionalized carbon nanotubes and graphene for heavy metal adsorption from water: Preparation, application, and mechanism

Carbon-based nanomaterials, especially carbon nanotubes and graphene, have drawn wide attention in recent years as novel materials for environmental applications. Notably, the functionalized derivatives of carbon nanotubes and graphene with high surface area and adsorption sites are proposed to remove heavy metals via adsorption, addressing the pressing pollution of heavy metal. This critical revies assesses the recent development of various functionalized carbon nanotubes and graphene that are used to remove heavy metals from contaminated water, including the preparation and characterization methods of functionalized carbon nanotubes and graphene, their applications for heavy metal adsorption, effects of water chemistry on the adsorption capacity, and decontamination mechanism. Future research directions have also been proposed with the goal of further improving their adsorption performance, the feasibility of industrial applications, and better simulating adsorption mechanisms.

Carbon nanoparticles for solar disinfection of water

The present manuscript deals with the application of carbon nano particles (CNP) and chitosan (CHIT) in the form of CHIT-CNP composite for the disinfection of water. The CHIT-CNP composite was prepared by the solution casting method and characterized by TEM, XRD and elemental analysis. In the present investigation we study the disinfection efficiency towards E. coli bacteria of both CNP and CHIT-CNP, under sunlight (SODIS) in identical experimental conditions. Both CNP and CHIT-CNP enhanced disinfection as compared to SODIS alone, and comparable performance was achieved when the same dose of CNP in the two materials was applied. However, the CHIT-CNP composite is in the form of a fabric and it is easier to use and handle as compared to the CNP powder, especially in rural and resource-constrained areas. Moreover the SODIS-CHIT-CNP setup, when used in a compound parabolic collector (CPC) reactor showed high bactericidal efficiency compared to SODIS alone, which is promising for practical applications. The disinfection potential of the CNP powder was compared with that of the well-known material TiO₂ Degussa P25 (DP₂₅): DP₂₅ gave 6-log kill of bacteria in 180min, whereas CNP produced 6-log kill in 150min.

Novel multifunctional cheese-like 3D carbon-BN as a highly efficient adsorbent for water purification

In this paper, a novel three dimensional carbon boron nitride (3D C-BN) was successfully prepared. The obtained material has porous cheese-like structure and pore size ranging from 2 nm to 100 nm. Attractively, the 3D C-BN, which combines the adsorption advantages of BN and carbon together, exhibits excellent adsorption properties for organic dyes, oils and heavy metal ions. The maximum removal capacities of 3D C-BN for methyl blue (MB) and congo red (CR) are 408 mg g⁻¹ and 307 mg g⁻¹, respectively. Furthermore, 3D C-BN can quickly and efficiently remove oils (salad oil, gasoline and pump oil) and heavy metal ions (Cr³⁺, Cd²⁺ and Ni²⁺) from waste water. The macro bulk 3D C-BN, which is more convenient to use than powdered materials, can be reused by burning or heating in air and still maintains high adsorption capacity. Significantly, these superior performances can find practical application in water purification.

Evaluation of the sorption mechanism of ionic liquids onto multi-walled carbon nanotubes

The knowledge of the sorption mechanism of different chemicals onto third generation carbon sorbents such as carbon nanotubes (CNTs) is needed in order to project systems for the effective removal of pollutants from the environment. This paper reports evaluation of the sorption mechanism of selected ionic liquids (ILs), being considered as potential pollutant in environment, onto various CNTs. CNTs characterized by the smallest diameter and the biggest surface area showed the highest sorption capacity to isolate ILs from an aqueous solution. CNTs with a bigger diameter, a functionalized surface and particularly a helical shape showed a lower sorption capacity. The sorption mechanism has been defined as complex, including van der Waals, π-π and electrostatic interactions with dominating π-π interactions. Due to the relatively high sorption coefficient (355.98 ± 20.69-6397.10 ± 355.42 L kg^-1 depending on the IL) the study showed that multi-walled carbon nanotubes can potentially be used to effectively isolate ILs from an aqueous solution. Moreover, proved in this study, the fast sorption kinetic, and uncomplicated regeneration process, leading to an even higher sorption capacity, means that CNTs are promising material which could find potential applications in the treatment of water contaminated by ILs.

Enhanced Adsorption of Selenium Ions from Aqueous Solution Using Iron Oxide Impregnated Carbon Nanotubes

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe₂O₃ nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffractometer (XRD), Brunauer, Emmett, and Teller (BET) surface area analyzer, thermogravimetric analysis (TGA), zeta potential, and energy dispersive X-ray spectroscopy (EDS). The adsorption parameters of the selenium ions from water using raw CNTs and iron oxide impregnated carbon nanotubes (CNT-Fe₂O₃) were optimized. Total removal of 1 ppm Se ions from water was achieved when 25 mg of CNTs impregnated with 20 wt.% of iron oxide nanoparticles is used. Freundlich and Langmuir isotherm models were used to study the nature of the adsorption process. Pseudo-first and pseudo-second-order models were employed to study the kinetics of selenium ions adsorption onto the surface of iron oxide impregnated CNTs. Maximum adsorption capacity of the Fe₂O₃ impregnated CNTs, predicted by Langmuir isotherm model, was found to be 111 mg/g. This new finding might revolutionize the adsorption treatment process and application by introducing a new type of nanoadsorbent that has super adsorption capacity towards Se ions.

Adsorption of Toluene and Paraxylene from Aqueous Solution Using Pure and Iron Oxide Impregnated Carbon Nanotubes: Kinetics and Isotherms Study

Multiwall carbon nanotubes (CNTs) and iron oxide impregnated carbon nanotubes (CNTs-iron oxide) were investigated for the adsorption of hazardous toluene and paraxylene (p-xylene) from aqueous solution. Pure CNTs were impregnated with iron oxides nanoparticles using wet impregnation technique. Various characterization techniques including thermogravimetric analysis, scanning electron microscopy, elemental dispersion spectroscopy, X-ray diffraction, and nitrogen adsorption analysis were used to study the thermal degradation, surface morphology, purity, and surface area of the materials. Batch adsorption experiments show that iron oxide impregnated CNTs have higher degree of removal of p-xylene (i.e., 90%) compared with toluene (i.e., 70%), for soaking time 2 h, with pollutant initial concentration 100 ppm, at pH 6 and shaking speed of 200 rpm at 25°C. Pseudo-second-order model provides better fitting for the toluene and p-xylene adsorption. Langmuir and Freundlich isotherm models demonstrate good fitting for the adsorption data of toluene and p-xylene.

High-Capacity and Photoregenerable Composite Material for Efficient Adsorption and Degradation of Phenanthrene in Water

We report a novel composite material, referred to as activated charcoal supported titanate nanotubes (TNTs@AC), for highly efficient adsorption and photodegradation of a representative polycyclic aromatic hydrocarbon (PAH), phenanthrene. TNTs@AC was prepared through a one-step hydrothermal method, and is composed of an activated charcoal core and a shell of carbon-coated titanate nanotubes. TNTs@AC offered a maximum Langmuir adsorption capacity of 12.1 mg/g for phenanthrene (a model PAH), which is ∼11 times higher than the parent activated charcoal. Phenanthrene was rapidly concentrated onto TNTs@AC, and subsequently completely photodegraded under UV light within 2 h. The photoregenerated TNTs@AC can then be reused for another adsorption-photodegradation cycle without significant capacity or activity loss. TNTs@AC performed well over a wide range of pH, ionic strength, and dissolved organic matter. Mechanistically, the enhanced adsorption capacity is attributed to the formation of carbon-coated ink-bottle pores of the titanate nanotubes, which are conducive to capillary condensation; in addition, the modified microcarbon facilitates transfer of excited electrons, thereby inhibiting recombination of the electron-hole pairs, resulting in high photocatalytic activity. The combined high adsorption capacity, photocatalytic activity, and regenerability/reusability merit TNTs@AC a very attractive material for concentrating and degrading a host of micropollutants in the environment.

Rapid adsorption of toxic Pb(II) ions from aqueous solution using multiwall carbon nanotubes synthesized by microwave chemical vapor deposition technique

Multiwall carbon nanotubes (MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(II) binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared (FT-IR), Brunauer, Emmett and Teller (BET), Field Emission Scanning Electron Microscopy (FESEM) analysis, and the adsorption of Pb(II) was studied as a function of pH, initial Pb(II) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmax was calculated to be 104.2mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ∆H(0), ∆S(0) and ∆G(0) were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal (99.9%) of Pb(II) are at pH5, MWCNT dosage 0.1g, agitation speed 160r/min and time of 22.5min with the initial concentration of 10mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(II) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.

Microwave-induced carbon nanotubes catalytic degradation of organic pollutants in aqueous solution

In this study, a new catalytic degradation technology using microwave induced carbon nanotubes (MW/CNTs) was proposed and applied in the treatment of organic pollutants in aqueous solution. The catalytic activity of three CNTs of 10-20nm, 20-40nm, and 40-60nm diameters were compared. The results showed that organic pollutants such as methyl orange (MO), methyl parathion (MP), sodium dodecyl benzene sulfonate (SDBS), bisphenol A (BPA), and methylene blue (MB) in aqueous solution could be degraded effectively and rapidly in MW/CNTs system. CNTs with diameter of 10-20nm exhibited the highest catalytic activity of the three CNTs under MW irradiation. Further, complete degradation was obtained using 10-20nm CNTs within 7.0min irradiation when 25mL MO solution (25mg/L), 1.2g/L catalyst dose, 450W, 2450MHz, and pH=6.0 were applied. The rate constants (k) for the degradation of SDBS, MB, MP, MO and BPA using 10-20nm CNTs/MW system were 0.726, 0.679, 0.463, 0.334 and 0.168min(-1), respectively. Therefore, this technology may have potential application for the treatment of targeted organic pollutants in wastewaters.

Adsorption of chlorophenols from aqueous solutions by pristine and surface functionalized single-walled carbon nanotubes

The adsorption of six kinds of chlorophenols on pristine, hydroxylated and carboxylated single-walled carbon nanotubes (SWCNTs) has been investigated. Pseudo-first order and pseudo-second order models were used to describe the kinetic data. All adsorption isotherms were well fitted with Langmuir, Freundlich and Polanyi-Manes models, due to surface adsorption dominating the adsorption process. The close linear relationship between logKow and logKd suggested that hydrophobicity played an important role in the adsorption. The SWCNTs' adsorption capacity for chlorophenols was weakened by addition of oxygen-containing functional groups on the surface, due to the loss of specific surface area, the increase of hydrophilicity and the reduction of π-π interaction. The best adsorption capacity of pristine SWCNTs, SWCNT-OH and SWCNT-COOH for six chlorophenols varied from 19 to 84mg/g, from 19 to 65mg/g and from 17 to 65mg/g, respectively. The effect of pH on the adsorption of 2,6-dichlorophenol (2,6-DCP), was also studied. When pH is over the pKa of 2,6-dichlorophenol (2,6-DCP), its removal dropped sharply. When ionic strength increased (NaCl or KCl concentration from 0 to 0.02mmol/L), the adsorption capacity of 2,6-DCP on pristine SWCNTs decreased slightly. The comparison of chlorophenols adsorption by SWCNTs, MWCNTs and PAC was made, indicating that the adsorption rate of CNTs was much faster than that of PAC. The results provide useful information about the feasibility of SWCNTs as an adsorbent to remove chlorophenols from aqueous solutions.

Active capping technology: a new environmental remediation of contaminated sediment

The management and treatment of contaminated sediment is a worldwide problem and poses major technical and economic challenges. Nowadays, various attempts have been committed to investigating a cost-effective way in contaminated sediment restoration. Among the remediation options, in situ capping turns out to be a less expensive, less disruptive, and more durable approach. However, by using the low adsorption capacity materials, traditional caps do not always fulfill the reduction of risks that can be destructive for human health, ecosystem, and even natural resources. Active caps, therefore, are designed to employ active materials (activated carbon, apatite, zeolite, organoclay, etc.) to strengthen their adsorption and degradation capacity. The active capping technology promises to be a permanent and cost-efficient solution to contaminated sediments. This paper provides a review on the types of active materials and the ways of these active materials employed in recent active capping studies. Cap design considerations including site-specific conditions, diffusion/advection, erosive forces, and active material selection that should be noticed in an eligible remediation project are also presented.

Surface functionalization of carbon nanotubes: fabrication and applications

This review highlights recent development in functionalization of CNTs and their applications.